Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (68 commits)
  sh: sh-rtc support for SH7709.
  sh: Revert __xdiv64_32 size change.
  sh: Update r7785rp defconfig.
  sh: Export div symbols for GCC 4.2 and ST GCC.
  sh: fix race in parallel out-of-tree build
  sh: Kill off dead mach.c for hp6xx.
  sh: hd64461.h cleanup and added comments.
  sh: Update the alignment when 4K stacks are used.
  sh: Add a .bss.page_aligned section for 4K stacks.
  sh: Don't let SH-4A clobber SH-4 CFLAGS.
  sh: Add parport stub for SuperIO ports.
  sh: Drop -Wa,-dsp for DSP tuning.
  sh: Update dreamcast defconfig.
  fb: pvr2fb: A few more __devinit annotations for PCI.
  fb: pvr2fb: Fix up section mismatch warnings.
  sh: Select IPR-IRQ for SH7091.
  sh: Correct __xdiv64_32/div64_32 return value size.
  sh: Fix timer-tmu build for SH-3.
  sh: Add cpu and mach links to CLEAN_FILES.
  sh: Preliminary support for the SH-X3 CPU.
  ...

arch/sh/Kconfig.debug

@@ -52,6 +52,10 @@ config EARLY_PRINTK
 	  select both the EARLY_SCIF_CONSOLE and SH_STANDARD_BIOS, using
 	  the kernel command line option to toggle back and forth.
 
+config DEBUG_BOOTMEM
+	depends on DEBUG_KERNEL
+	bool "Debug BOOTMEM initialization"
+
 config DEBUG_STACKOVERFLOW
 	bool "Check for stack overflows"
 	depends on DEBUG_KERNEL
@@ -82,6 +86,7 @@ config SH_KGDB
 	bool "Include KGDB kernel debugger"
 	select FRAME_POINTER
 	select DEBUG_INFO
+	depends on CPU_SH3 || CPU_SH4
 	help
 	  Include in-kernel hooks for kgdb, the Linux kernel source level
 	  debugger.  See <http://kgdb.sourceforge.net/> for more information.

arch/sh/Makefile

@@ -34,20 +34,20 @@ isa-y			:= $(isa-y)-nofpu
 endif
 endif
 
-cflags-$(CONFIG_CPU_SH2)		:= -m2
-cflags-$(CONFIG_CPU_SH2A)		:= -m2a $(call cc-option,-m2a-nofpu,)
-cflags-$(CONFIG_CPU_SH3)		:= -m3
-cflags-$(CONFIG_CPU_SH4)		:= -m4 \
+cflags-$(CONFIG_CPU_SH2)		:= $(call cc-option,-m2,)
+cflags-$(CONFIG_CPU_SH2A)		+= $(call cc-option,-m2a,) \
+					   $(call cc-option,-m2a-nofpu,)
+cflags-$(CONFIG_CPU_SH3)		:= $(call cc-option,-m3,)
+cflags-$(CONFIG_CPU_SH4)		:= $(call cc-option,-m4,) \
 	$(call cc-option,-mno-implicit-fp,-m4-nofpu)
-cflags-$(CONFIG_CPU_SH4A)		:= $(call cc-option,-m4a,) $(call cc-option,-m4a-nofpu,)
+cflags-$(CONFIG_CPU_SH4A)		+= $(call cc-option,-m4a,) \
+					   $(call cc-option,-m4a-nofpu,)
 
 cflags-$(CONFIG_CPU_BIG_ENDIAN)		+= -mb
 cflags-$(CONFIG_CPU_LITTLE_ENDIAN)	+= -ml
 
 cflags-y	+= $(call as-option,-Wa$(comma)-isa=$(isa-y),) -ffreestanding
 
-cflags-$(CONFIG_SH_DSP)			+= -Wa,-dsp
-
 cflags-$(CONFIG_MORE_COMPILE_OPTIONS)	+= \
 	$(shell echo $(CONFIG_COMPILE_OPTIONS) | sed -e 's/"//g')
 
@@ -87,39 +87,37 @@ core-y				+= arch/sh/kernel/ arch/sh/mm/
 core-$(CONFIG_SH_FPU_EMU)	+= arch/sh/math-emu/
 
 # Boards
-machdir-$(CONFIG_SH_SOLUTION_ENGINE)		:= se/770x
-machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE)	:= se/7722
-machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE)	:= se/7751
-machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE)	:= se/7780
-machdir-$(CONFIG_SH_7300_SOLUTION_ENGINE)	:= se/7300
-machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE)	:= se/7343
-machdir-$(CONFIG_SH_73180_SOLUTION_ENGINE)	:= se/73180
-machdir-$(CONFIG_SH_HP6XX)			:= hp6xx
-machdir-$(CONFIG_SH_SATURN)			:= saturn
-machdir-$(CONFIG_SH_DREAMCAST)			:= dreamcast
-machdir-$(CONFIG_SH_MPC1211)			:= mpc1211
-machdir-$(CONFIG_SH_SH03)			:= sh03
-machdir-$(CONFIG_SH_SECUREEDGE5410)		:= snapgear
-machdir-$(CONFIG_SH_HS7751RVOIP)		:= renesas/hs7751rvoip
-machdir-$(CONFIG_SH_RTS7751R2D)			:= renesas/rts7751r2d
-machdir-$(CONFIG_SH_7751_SYSTEMH)		:= renesas/systemh
-machdir-$(CONFIG_SH_EDOSK7705)			:= renesas/edosk7705
-machdir-$(CONFIG_SH_HIGHLANDER)			:= renesas/r7780rp
-machdir-$(CONFIG_SH_7710VOIPGW)			:= renesas/sh7710voipgw
-machdir-$(CONFIG_SH_SH4202_MICRODEV)		:= superh/microdev
-machdir-$(CONFIG_SH_LANDISK)			:= landisk
-machdir-$(CONFIG_SH_TITAN)			:= titan
-machdir-$(CONFIG_SH_SHMIN)			:= shmin
-machdir-$(CONFIG_SH_7206_SOLUTION_ENGINE)	:= se/7206
-machdir-$(CONFIG_SH_7619_SOLUTION_ENGINE)	:= se/7619
-machdir-$(CONFIG_SH_LBOX_RE2)			:= lboxre2
-machdir-$(CONFIG_SH_UNKNOWN)			:= unknown
-
-incdir-y			:= $(notdir $(machdir-y))
-incdir-$(CONFIG_SH_HP6XX)			:= hp6xx
+machdir-$(CONFIG_SH_SOLUTION_ENGINE)		+= se/770x
+machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE)	+= se/7722
+machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE)	+= se/7751
+machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE)	+= se/7780
+machdir-$(CONFIG_SH_7300_SOLUTION_ENGINE)	+= se/7300
+machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE)	+= se/7343
+machdir-$(CONFIG_SH_73180_SOLUTION_ENGINE)	+= se/73180
+machdir-$(CONFIG_SH_HP6XX)			+= hp6xx
+machdir-$(CONFIG_SH_DREAMCAST)			+= dreamcast
+machdir-$(CONFIG_SH_MPC1211)			+= mpc1211
+machdir-$(CONFIG_SH_SH03)			+= sh03
+machdir-$(CONFIG_SH_SECUREEDGE5410)		+= snapgear
+machdir-$(CONFIG_SH_HS7751RVOIP)		+= renesas/hs7751rvoip
+machdir-$(CONFIG_SH_RTS7751R2D)			+= renesas/rts7751r2d
+machdir-$(CONFIG_SH_7751_SYSTEMH)		+= renesas/systemh
+machdir-$(CONFIG_SH_EDOSK7705)			+= renesas/edosk7705
+machdir-$(CONFIG_SH_HIGHLANDER)			+= renesas/r7780rp
+machdir-$(CONFIG_SH_7710VOIPGW)			+= renesas/sh7710voipgw
+machdir-$(CONFIG_SH_SH4202_MICRODEV)		+= superh/microdev
+machdir-$(CONFIG_SH_LANDISK)			+= landisk
+machdir-$(CONFIG_SH_TITAN)			+= titan
+machdir-$(CONFIG_SH_SHMIN)			+= shmin
+machdir-$(CONFIG_SH_7206_SOLUTION_ENGINE)	+= se/7206
+machdir-$(CONFIG_SH_7619_SOLUTION_ENGINE)	+= se/7619
+machdir-$(CONFIG_SH_LBOX_RE2)			+= lboxre2
+
+incdir-y	:= $(notdir $(machdir-y))
 
 ifneq ($(machdir-y),)
-core-y				+= arch/sh/boards/$(machdir-y)/
+core-y	+= $(addprefix arch/sh/boards/, \
+	     $(filter-out ., $(patsubst %,%/,$(machdir-y))))
 endif
 
 # Companion chips
@@ -157,19 +155,31 @@ include/asm-sh/.cpu: $(wildcard include/config/cpu/*.h) \
 #	Most boards have their own mach directories.  For the ones that
 #	don't, just reference the parent directory so the semantics are
 #	kept roughly the same.
+#
+#	When multiple boards are compiled in at the same time, preference
+#	for the mach link is given to whichever has a directory for its
+#	headers. However, this is only a workaround until platforms that
+#	can live in the same kernel image back away from relying on the
+#	mach link.
 
 include/asm-sh/.mach: $(wildcard include/config/sh/*.h) \
 		      include/config/auto.conf FORCE
-	@echo -n '  SYMLINK include/asm-sh/mach -> '
 	$(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi
-	$(Q)if [ -d $(incdir-prefix)$(incdir-y) ]; then \
-		echo -e 'include/asm-sh/$(incdir-y)'; \
-		ln -fsn $(incdir-prefix)$(incdir-y) \
+	$(Q)rm -f include/asm-sh/mach
+	$(Q)for i in $(incdir-y); do \
+	if [ -d $(incdir-prefix)$$i ]; then \
+		echo -n '  SYMLINK include/asm-sh/mach -> '; \
+		echo -e "include/asm-sh/$$i"; \
+		ln -fsn $(incdir-prefix)$$i \
 			include/asm-sh/mach; \
 	else \
-		echo -e 'include/asm-sh'; \
-		ln -fsn $(incdir-prefix) include/asm-sh/mach; \
-	fi
+		if [ ! -d include/asm-sh/mach ]; then \
+			echo -n '  SYMLINK include/asm-sh/mach -> '; \
+			echo -e 'include/asm-sh'; \
+			ln -fsn $(incdir-prefix) include/asm-sh/mach; \
+		fi; \
+	fi; \
+	done
 	@touch $@
 
 archprepare: include/asm-sh/.cpu include/asm-sh/.mach maketools
@@ -188,7 +198,9 @@ compressed: zImage
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
 
-CLEAN_FILES += include/asm-sh/machtypes.h
+CLEAN_FILES += include/asm-sh/machtypes.h \
+	       include/asm-sh/cpu include/asm-sh/.cpu \
+	       include/asm-sh/mach include/asm-sh/.mach
 
 define archhelp
 	@echo '* zImage 	           - Compressed kernel image'

arch/sh/boards/dreamcast/setup.c

@@ -60,7 +60,7 @@ static void __init dreamcast_setup(char **cmdline_p)
 #endif
 }
 
-struct sh_machine_vector mv_dreamcast __initmv = {
+static struct sh_machine_vector mv_dreamcast __initmv = {
 	.mv_name		= "Sega Dreamcast",
 	.mv_setup		= dreamcast_setup,
 	.mv_irq_demux		= systemasic_irq_demux,
@@ -70,4 +70,3 @@ struct sh_machine_vector mv_dreamcast __initmv = {
 	.mv_consistent_free	= dreamcast_consistent_free,
 #endif
 };
-ALIAS_MV(dreamcast)

arch/sh/boards/hp6xx/mach.c

-/*
- * linux/arch/sh/boards/hp6xx/mach.c
- *
- * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * Machine vector for the HP680
- */
-#include <asm/machvec.h>
-#include <asm/hd64461.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-
-struct sh_machine_vector mv_hp6xx __initmv = {
-	.mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM,
-
-	.mv_inb = hd64461_inb,
-	.mv_inw = hd64461_inw,
-	.mv_inl = hd64461_inl,
-	.mv_outb = hd64461_outb,
-	.mv_outw = hd64461_outw,
-	.mv_outl = hd64461_outl,
-
-	.mv_inb_p = hd64461_inb_p,
-	.mv_inw_p = hd64461_inw,
-	.mv_inl_p = hd64461_inl,
-	.mv_outb_p = hd64461_outb_p,
-	.mv_outw_p = hd64461_outw,
-	.mv_outl_p = hd64461_outl,
-
-	.mv_insb = hd64461_insb,
-	.mv_insw = hd64461_insw,
-	.mv_insl = hd64461_insl,
-	.mv_outsb = hd64461_outsb,
-	.mv_outsw = hd64461_outsw,
-	.mv_outsl = hd64461_outsl,
-
-	.mv_readw = hd64461_readw,
-	.mv_writew = hd64461_writew,
-
-	.mv_irq_demux = hd64461_irq_demux,
-};
-
-ALIAS_MV(hp6xx)

arch/sh/boards/hp6xx/setup.c

@@ -98,10 +98,9 @@ static void __init hp6xx_setup(char **cmdline_p)
 }
 device_initcall(hp6xx_devices_setup);
 
-struct sh_machine_vector mv_hp6xx __initmv = {
+static struct sh_machine_vector mv_hp6xx __initmv = {
 	.mv_name = "hp6xx",
 	.mv_setup = hp6xx_setup,
 	.mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM,
 	.mv_irq_demux = hd64461_irq_demux,
 };
-ALIAS_MV(hp6xx)

arch/sh/boards/landisk/setup.c

@@ -97,10 +97,9 @@ static void __init landisk_setup(char **cmdline_p)
 /*
  * The Machine Vector
  */
-struct sh_machine_vector mv_landisk __initmv = {
+static struct sh_machine_vector mv_landisk __initmv = {
 	.mv_name = "LANDISK",
 	.mv_nr_irqs = 72,
 	.mv_setup = landisk_setup,
 	.mv_init_irq = init_landisk_IRQ,
 };
-ALIAS_MV(landisk)

arch/sh/boards/lboxre2/setup.c

@@ -77,9 +77,8 @@ device_initcall(lboxre2_devices_setup);
 /*
  * The Machine Vector
  */
-struct sh_machine_vector mv_lboxre2 __initmv = {
+static struct sh_machine_vector mv_lboxre2 __initmv = {
 	.mv_name		= "L-BOX RE2",
 	.mv_nr_irqs		= 72,
 	.mv_init_irq		= init_lboxre2_IRQ,
 };
-ALIAS_MV(lboxre2)

arch/sh/boards/mpc1211/setup.c

@@ -338,11 +338,10 @@ static void __init mpc1211_setup(char **cmdline_p)
 /*
  * The Machine Vector
  */
-struct sh_machine_vector mv_mpc1211 __initmv = {
+static struct sh_machine_vector mv_mpc1211 __initmv = {
 	.mv_name		= "Interface MPC-1211(CTP/PCI/MPC-SH02)",
 	.mv_setup		= mpc1211_setup,
 	.mv_nr_irqs		= 48,
 	.mv_irq_demux		= mpc1211_irq_demux,
 	.mv_init_irq		= init_mpc1211_IRQ,
 };
-ALIAS_MV(mpc1211)

arch/sh/boards/renesas/edosk7705/setup.c

@@ -21,7 +21,7 @@ static void __init sh_edosk7705_init_irq(void)
 /*
  * The Machine Vector
  */
-struct sh_machine_vector mv_edosk7705 __initmv = {
+static struct sh_machine_vector mv_edosk7705 __initmv = {
 	.mv_name		= "EDOSK7705",
 	.mv_nr_irqs		= 80,
 
@@ -41,4 +41,3 @@ struct sh_machine_vector mv_edosk7705 __initmv = {
 	.mv_isa_port2addr	= sh_edosk7705_isa_port2addr,
 	.mv_init_irq		= sh_edosk7705_init_irq,
 };
-ALIAS_MV(edosk7705)

arch/sh/boards/renesas/hs7751rvoip/setup.c

@@ -89,7 +89,7 @@ static void __init hs7751rvoip_setup(char **cmdline_p)
 	printk(KERN_INFO "Renesas Technology Sales HS7751RVoIP-2 support.\n");
 }
 
-struct sh_machine_vector mv_hs7751rvoip __initmv = {
+static struct sh_machine_vector mv_hs7751rvoip __initmv = {
 	.mv_name		= "HS7751RVoIP",
 	.mv_setup		= hs7751rvoip_setup,
 	.mv_nr_irqs		= 72,
@@ -118,4 +118,3 @@ struct sh_machine_vector mv_hs7751rvoip __initmv = {
 	.mv_init_irq		= hs7751rvoip_init_irq,
 	.mv_ioport_map		= hs7751rvoip_ioport_map,
 };
-ALIAS_MV(hs7751rvoip)

arch/sh/boards/renesas/r7780rp/Kconfig

@@ -6,18 +6,18 @@ choice
 
 config SH_R7780RP
 	bool "R7780RP-1 board support"
-	select CPU_SUBTYPE_SH7780
+	depends on CPU_SUBTYPE_SH7780
 
 config SH_R7780MP
 	bool "R7780MP board support"
-	select CPU_SUBTYPE_SH7780
+	depends on CPU_SUBTYPE_SH7780
 	help
 	  Selecting this option will enable support for the mass-production
 	  version of the R7780RP. If in doubt, say Y.
 
 config SH_R7785RP
 	bool "R7785RP board support"
-	select CPU_SUBTYPE_SH7785
+	depends on CPU_SUBTYPE_SH7785
 
 endchoice
 

arch/sh/boards/renesas/r7780rp/setup.c

@@ -166,10 +166,9 @@ static void __init highlander_setup(char **cmdline_p)
 /*
  * The Machine Vector
  */
-struct sh_machine_vector mv_highlander __initmv = {
+static struct sh_machine_vector mv_highlander __initmv = {
 	.mv_name		= "Highlander",
 	.mv_nr_irqs		= 109,
 	.mv_setup		= highlander_setup,
 	.mv_init_irq		= highlander_init_irq,
 };
-ALIAS_MV(highlander)

arch/sh/boards/renesas/rts7751r2d/setup.c

@@ -176,7 +176,7 @@ static void __init rts7751r2d_setup(char **cmdline_p)
 /*
  * The Machine Vector
  */
-struct sh_machine_vector mv_rts7751r2d __initmv = {
+static struct sh_machine_vector mv_rts7751r2d __initmv = {
 	.mv_name		= "RTS7751R2D",
 	.mv_setup		= rts7751r2d_setup,
 	.mv_nr_irqs		= 72,
@@ -189,4 +189,3 @@ struct sh_machine_vector mv_rts7751r2d __initmv = {
 	.mv_consistent_free	= voyagergx_consistent_free,
 #endif
 };
-ALIAS_MV(rts7751r2d)

arch/sh/boards/renesas/sh7710voipgw/setup.c

@@ -88,9 +88,8 @@ static void __init sh7710voipgw_init_irq(void)
 /*
  * The Machine Vector
  */
-struct sh_machine_vector mv_sh7710voipgw __initmv = {
+static struct sh_machine_vector mv_sh7710voipgw __initmv = {
 	.mv_name		= "SH7710 VoIP Gateway",
 	.mv_nr_irqs		= 104,
 	.mv_init_irq		= sh7710voipgw_init_irq,
 };
-ALIAS_MV(sh7710voipgw)

arch/sh/boards/renesas/systemh/setup.c

@@ -28,7 +28,7 @@ static void __init sh7751systemh_init_irq(void)
 	make_systemh_irq(0xb);	/* Ethernet interrupt */
 }
 
-struct sh_machine_vector mv_7751systemh __initmv = {
+static struct sh_machine_vector mv_7751systemh __initmv = {
 	.mv_name		= "7751 SystemH",
 	.mv_nr_irqs		= 72,
 
@@ -55,4 +55,3 @@ struct sh_machine_vector mv_7751systemh __initmv = {
 
 	.mv_init_irq		= sh7751systemh_init_irq,
 };
-ALIAS_MV(7751systemh)

arch/sh/boards/saturn/Makefile

-#
-# Makefile for the Sega Saturn specific parts of the kernel
-#
-
-obj-y	 := setup.o io.o irq.o
-
-obj-$(CONFIG_SMP) += smp.o
-

arch/sh/boards/saturn/io.c

-/*
- * arch/sh/boards/saturn/io.c
- *
- * I/O routines for the Sega Saturn.
- *
- * Copyright (C) 2002 Paul Mundt
- *
- * Released under the terms of the GNU GPL v2.0.
- */
-#include <asm/saturn/io.h>
-#include <asm/machvec.h>
-
-unsigned long saturn_isa_port2addr(unsigned long offset)
-{
-	return offset;
-}
-
-void *saturn_ioremap(unsigned long offset, unsigned long size)
-{
-	return (void *)offset;
-}
-
-void saturn_iounmap(void *addr)
-{
-}
-

arch/sh/boards/saturn/irq.c

-/*
- * arch/sh/boards/saturn/irq.c
- *
- * Copyright (C) 2002 Paul Mundt
- *
- * Released under the terms of the GNU GPL v2.0.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-
-/*
- * Interrupts map out as follows:
- *
- *  Vector	Name		Mask
- *
- * 	64	VBLANKIN	0x0001
- * 	65	VBLANKOUT	0x0002
- *	66	HBLANKIN	0x0004
- *	67	TIMER0		0x0008
- *	68	TIMER1		0x0010
- *	69	DSPEND		0x0020
- *	70	SOUNDREQUEST	0x0040
- *	71	SYSTEMMANAGER	0x0080
- *	72	PAD		0x0100
- *	73	LEVEL2DMAEND	0x0200
- *	74	LEVEL1DMAEND	0x0400
- *	75	LEVEL0DMAEND	0x0800
- *	76	DMAILLEGAL	0x1000
- *	77	SRITEDRAWEND	0x2000
- *	78	ABUS		0x8000
- *
- */
-#define SATURN_IRQ_MIN		64	/* VBLANKIN */
-#define SATURN_IRQ_MAX		78	/* ABUS */
-
-#define SATURN_IRQ_MASK		0xbfff
-
-static inline u32 saturn_irq_mask(unsigned int irq_nr)
-{
-	u32 mask;
-
-	mask = (1 << (irq_nr - SATURN_IRQ_MIN));
-	mask <<= (irq_nr == SATURN_IRQ_MAX);
-	mask &= SATURN_IRQ_MASK;
-
-	return mask;
-}
-
-static inline void mask_saturn_irq(unsigned int irq_nr)
-{
-	u32 mask;
-
-	mask = ctrl_inl(SATURN_IMR);
-	mask |= saturn_irq_mask(irq_nr);
-	ctrl_outl(mask, SATURN_IMR);
-}
-
-static inline void unmask_saturn_irq(unsigned int irq_nr)
-{
-	u32 mask;
-
-	mask = ctrl_inl(SATURN_IMR);
-	mask &= ~saturn_irq_mask(irq_nr);
-	ctrl_outl(mask, SATURN_IMR);
-}
-
-static void disable_saturn_irq(unsigned int irq_nr)
-{
-	mask_saturn_irq(irq_nr);
-}
-
-static void enable_saturn_irq(unsigned int irq_nr)
-{
-	unmask_saturn_irq(irq_nr);
-}
-
-static void mask_and_ack_saturn_irq(unsigned int irq_nr)
-{
-	mask_saturn_irq(irq_nr);
-}
-
-static void end_saturn_irq(unsigned int irq_nr)
-{
-	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-		unmask_saturn_irq(irq_nr);
-}
-
-static unsigned int startup_saturn_irq(unsigned int irq_nr)
-{
-	unmask_saturn_irq(irq_nr);
-
-	return 0;
-}
-
-static void shutdown_saturn_irq(unsigned int irq_nr)
-{
-	mask_saturn_irq(irq_nr);
-}
-
-static struct hw_interrupt_type saturn_int = {
-	.typename	= "Saturn",
-	.enable		= enable_saturn_irq,
-	.disable	= disable_saturn_irq,
-	.ack		= mask_and_ack_saturn_irq,
-	.end		= end_saturn_irq,
-	.startup	= startup_saturn_irq,
-	.shutdown	= shutdown_saturn_irq,
-};
-
-int saturn_irq_demux(int irq_nr)
-{
-	/* FIXME */
-	return irq_nr;
-}
-

arch/sh/boards/saturn/setup.c

-/* 
- * arch/sh/boards/saturn/setup.c
- *
- * Hardware support for the Sega Saturn.
- *
- * Copyright (c) 2002 Paul Mundt
- *
- * Released under the terms of the GNU GPL v2.0.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <asm/io.h>
-#include <asm/machvec.h>
-#include <asm/mach/io.h>
-
-extern int saturn_irq_demux(int irq_nr);
-
-/*
- * The Machine Vector
- */
-struct sh_machine_vector mv_saturn __initmv = {
-	.mv_name		= "Sega Saturn",
-	.mv_nr_irqs		= 80,	/* Fix this later */
-
-	.mv_isa_port2addr	= saturn_isa_port2addr,
-	.mv_irq_demux		= saturn_irq_demux,
-
-	.mv_ioremap		= saturn_ioremap,
-	.mv_iounmap		= saturn_iounmap,
-};
-ALIAS_MV(saturn)

arch/sh/boards/saturn/smp.c

-/* 
- * arch/sh/boards/saturn/smp.c
- *
- * SMP support for the Sega Saturn.
- *
- * Copyright (c) 2002 Paul Mundt
- *
- * Released under the terms of the GNU GPL v2.0.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-
-#include <asm/saturn/smpc.h>
-
-extern void start_secondary(void);
-
-void __smp_send_ipi(unsigned int cpu, unsigned int action)
-{
-	/* Nothing here yet .. */
-}
-
-unsigned int __smp_probe_cpus(void)
-{
-	/*
-	 * This is just a straightforward master/slave configuration,
-	 * and probing isn't really supported..
-	 */
-	return 2;
-}
-
-/*
- * We're only allowed to do byte-access to SMPC registers. In
- * addition to which, we treat them as write-only, since
- * reading from them will return undefined data.
- */
-static inline void smpc_slave_stop(unsigned int cpu)
-{
-	smpc_barrier();
-	ctrl_outb(1, SMPC_STATUS);
-
-	ctrl_outb(SMPC_CMD_SSHOFF, SMPC_COMMAND);
-	smpc_barrier();
-}
-
-static inline void smpc_slave_start(unsigned int cpu)
-{
-	ctrl_outb(1, SMPC_STATUS);
-	ctrl_outb(SMPC_CMD_SSHON, SMPC_COMMAND);
-
-	smpc_barrier();
-}
-
-void __smp_slave_init(unsigned int cpu)
-{
-	register unsigned long vbr;
-	void **entry;
-
-	__asm__ __volatile__ ("stc vbr, %0\n\t" : "=r" (vbr));
-	entry = (void **)(vbr + 0x310 + 0x94);
-
-	smpc_slave_stop(cpu);
-
-	*(void **)entry = (void *)start_secondary;
-
-	smpc_slave_start(cpu);
-}
-

arch/sh/boards/se/7206/setup.c

@@ -70,7 +70,7 @@ __initcall(se7206_devices_setup);
  * The Machine Vector
  */
 
-struct sh_machine_vector mv_se __initmv = {
+static struct sh_machine_vector mv_se __initmv = {
 	.mv_name		= "SolutionEngine",
 	.mv_nr_irqs		= 256,
 	.mv_inb			= se7206_inb,
@@ -96,4 +96,3 @@ struct sh_machine_vector mv_se __initmv = {
 
 	.mv_init_irq		= init_se7206_IRQ,
 };
-ALIAS_MV(se)

arch/sh/boards/se/7300/setup.c

@@ -46,7 +46,7 @@ __initcall(se7300_devices_setup);
 /*
  * The Machine Vector
  */
-struct sh_machine_vector mv_7300se __initmv = {
+static struct sh_machine_vector mv_7300se __initmv = {
 	.mv_name = "SolutionEngine 7300",
 	.mv_nr_irqs = 109,
 	.mv_inb = sh7300se_inb,
@@ -72,4 +72,3 @@ struct sh_machine_vector mv_7300se __initmv = {
 
 	.mv_init_irq = init_7300se_IRQ,
 };
-ALIAS_MV(7300se)

arch/sh/boards/se/73180/setup.c

@@ -46,7 +46,7 @@ __initcall(se73180_devices_setup);
 /*
  * The Machine Vector
  */
-struct sh_machine_vector mv_73180se __initmv = {
+static struct sh_machine_vector mv_73180se __initmv = {
 	.mv_name = "SolutionEngine 73180",
 	.mv_nr_irqs = 108,
 	.mv_inb = sh73180se_inb,
@@ -73,4 +73,3 @@ struct sh_machine_vector mv_73180se __initmv = {
 	.mv_init_irq = init_73180se_IRQ,
 	.mv_irq_demux = shmse_irq_demux,
 };
-ALIAS_MV(73180se)

arch/sh/boards/se/7343/setup.c

@@ -64,7 +64,7 @@ static void __init sh7343se_setup(char **cmdline_p)
 /*
  * The Machine Vector
  */
-struct sh_machine_vector mv_7343se __initmv = {
+static struct sh_machine_vector mv_7343se __initmv = {
 	.mv_name = "SolutionEngine 7343",
 	.mv_setup = sh7343se_setup,
 	.mv_nr_irqs = 108,
@@ -92,4 +92,3 @@ struct sh_machine_vector mv_7343se __initmv = {
 	.mv_init_irq = init_7343se_IRQ,
 	.mv_irq_demux = shmse_irq_demux,
 };
-ALIAS_MV(7343se)

arch/sh/boards/se/7619/setup.c

@@ -15,8 +15,7 @@
  * The Machine Vector
  */
 
-struct sh_machine_vector mv_se __initmv = {
+static struct sh_machine_vector mv_se __initmv = {
 	.mv_name		= "SolutionEngine",
 	.mv_nr_irqs		= 108,
 };
-ALIAS_MV(se)

arch/sh/boards/se/770x/irq.c

@@ -15,46 +15,7 @@
 #include <asm/io.h>
 #include <asm/se.h>
 
-/* 
- * If the problem of make_ipr_irq is solved, 
- * this code will become unnecessary. :-) 
- */
-static void se770x_disable_ipr_irq(unsigned int irq)
-{
-	struct ipr_data *p = get_irq_chip_data(irq);
-
-	ctrl_outw(ctrl_inw(p->addr) & (0xffff ^ (0xf << p->shift)), p->addr);
-}
-
-static void se770x_enable_ipr_irq(unsigned int irq)
-{
-	struct ipr_data *p = get_irq_chip_data(irq);
-
-	ctrl_outw(ctrl_inw(p->addr) | (p->priority << p->shift), p->addr);
-}
-
-static struct irq_chip se770x_irq_chip = {
-	.name           = "MS770xSE-FPGA",
-	.mask           = se770x_disable_ipr_irq,
-	.unmask         = se770x_enable_ipr_irq,
-	.mask_ack       = se770x_disable_ipr_irq,
-};
-
-void make_se770x_irq(struct ipr_data *table, unsigned int nr_irqs)
-{
-	int i;
-
-	for (i = 0; i < nr_irqs; i++) {
-		unsigned int irq = table[i].irq;
-		disable_irq_nosync(irq);
-		set_irq_chip_and_handler_name(irq, &se770x_irq_chip,
-			handle_level_irq, "level");
-		set_irq_chip_data(irq, &table[i]);
-		se770x_enable_ipr_irq(irq);
-	}
-}
-
-static struct ipr_data se770x_ipr_map[] = {
+static struct ipr_data ipr_irq_table[] = {
 	/*
 	* Super I/O (Just mimic PC):
 	*  1: keyboard
@@ -68,46 +29,67 @@ static struct ipr_data se770x_ipr_map[] = {
 	*/
 #if defined(CONFIG_CPU_SUBTYPE_SH7705)
 	/* This is default value */
-	{ 13, 0, 8,  0x0f-13 ,BCR_ILCRA},
-	{ 5 , 0, 4,  0x0f- 5 ,BCR_ILCRA},
-	{ 10, 0, 0,  0x0f-10, BCR_ILCRB},
-	{ 7 , 0, 4,  0x0f- 7, BCR_ILCRC},
-	{ 3 , 0, 0,  0x0f- 3, BCR_ILCRC},
-	{ 1 , 0, 12, 0x0f- 1, BCR_ILCRD},
-	{ 12, 0, 4,  0x0f-12, BCR_ILCRD}, /* LAN */
-	{ 2 , 0, 8,  0x0f- 2, BCR_ILCRE}, /* PCIRQ2 */
-	{ 6 , 0, 4,  0x0f- 6, BCR_ILCRE}, /* PCIRQ1 */
-	{ 14, 0, 0,  0x0f-14, BCR_ILCRE}, /* PCIRQ0 */
-	{ 0 , 0, 12, 0x0f   , BCR_ILCRF}, 
-	{ 4 , 0, 4,  0x0f- 4, BCR_ILCRF},
-	{ 8 , 0, 12, 0x0f- 8, BCR_ILCRG},
-	{ 9 , 0, 8,  0x0f- 9, BCR_ILCRG},
-	{ 11, 0, 4,  0x0f-11, BCR_ILCRG},
+	{ 13, 0, 8,  0x0f-13, },
+	{ 5 , 0, 4,  0x0f- 5, },
+	{ 10, 1, 0,  0x0f-10, },
+	{ 7 , 2, 4,  0x0f- 7, },
+	{ 3 , 2, 0,  0x0f- 3, },
+	{ 1 , 3, 12, 0x0f- 1, },
+	{ 12, 3, 4,  0x0f-12, }, /* LAN */
+	{ 2 , 4, 8,  0x0f- 2, }, /* PCIRQ2 */
+	{ 6 , 4, 4,  0x0f- 6, }, /* PCIRQ1 */
+	{ 14, 4, 0,  0x0f-14, }, /* PCIRQ0 */
+	{ 0 , 5, 12, 0x0f   , }, 
+	{ 4 , 5, 4,  0x0f- 4, },
+	{ 8 , 6, 12, 0x0f- 8, },
+	{ 9 , 6, 8,  0x0f- 9, },
+	{ 11, 6, 4,  0x0f-11, },
 #else
-	{ 14, 0,  8, 0x0f-14 ,BCR_ILCRA},
-	{ 12, 0,  4, 0x0f-12 ,BCR_ILCRA},
-	{  8, 0,  4, 0x0f- 8 ,BCR_ILCRB},
-	{  6, 0, 12, 0x0f- 6 ,BCR_ILCRC},
-	{  5, 0,  8, 0x0f- 5 ,BCR_ILCRC},
-	{  4, 0,  4, 0x0f- 4 ,BCR_ILCRC},
-	{  3, 0,  0, 0x0f- 3 ,BCR_ILCRC},
-	{  1, 0, 12, 0x0f- 1 ,BCR_ILCRD},
+	{ 14, 0,  8, 0x0f-14, },
+	{ 12, 0,  4, 0x0f-12, },
+	{  8, 1,  4, 0x0f- 8, },
+	{  6, 2, 12, 0x0f- 6, },
+	{  5, 2,  8, 0x0f- 5, },
+	{  4, 2,  4, 0x0f- 4, },
+	{  3, 2,  0, 0x0f- 3, },
+	{  1, 3, 12, 0x0f- 1, },
 #if defined(CONFIG_STNIC)
 	/* ST NIC */
-	{ 10, 0,  4, 0x0f-10 ,BCR_ILCRD}, 	/* LAN */
+	{ 10, 3,  4, 0x0f-10, }, 	/* LAN */
 #endif
 	/* MRSHPC IRQs setting */
-	{  0, 0, 12, 0x0f- 0 ,BCR_ILCRE},	/* PCIRQ3 */
-	{ 11, 0,  8, 0x0f-11 ,BCR_ILCRE}, 	/* PCIRQ2 */
-	{  9, 0,  4, 0x0f- 9 ,BCR_ILCRE}, 	/* PCIRQ1 */
-	{  7, 0,  0, 0x0f- 7 ,BCR_ILCRE}, 	/* PCIRQ0 */
+	{  0, 4, 12, 0x0f- 0, },	/* PCIRQ3 */
+	{ 11, 4,  8, 0x0f-11, }, 	/* PCIRQ2 */
+	{  9, 4,  4, 0x0f- 9, }, 	/* PCIRQ1 */
+	{  7, 4,  0, 0x0f- 7, }, 	/* PCIRQ0 */
 	/* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */
 	/* NOTE: #2 and #13 are not used on PC */
-	{ 13, 0,  4, 0x0f-13 ,BCR_ILCRG}, 	/* SLOTIRQ2 */
-	{  2, 0,  0, 0x0f- 2 ,BCR_ILCRG}, 	/* SLOTIRQ1 */
+	{ 13, 6,  4, 0x0f-13, }, 	/* SLOTIRQ2 */
+	{  2, 6,  0, 0x0f- 2, }, 	/* SLOTIRQ1 */
 #endif
 };
 
+static unsigned long ipr_offsets[] = {
+	BCR_ILCRA,
+	BCR_ILCRB,
+	BCR_ILCRC,
+	BCR_ILCRD,
+	BCR_ILCRE,
+	BCR_ILCRF,
+	BCR_ILCRG,
+};
+
+static struct ipr_desc ipr_irq_desc = {
+	.ipr_offsets	= ipr_offsets,
+	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
+
+	.ipr_data	= ipr_irq_table,
+	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
+	.chip = {
+		.name	= "IPR-se770x",
+	},
+};
+
 /*
  * Initialize IRQ setting
  */
@@ -122,5 +104,5 @@ void __init init_se_IRQ(void)
 	ctrl_outw(0, BCR_ILCRF);
 	ctrl_outw(0, BCR_ILCRG);
 
-	make_se770x_irq(se770x_ipr_map, ARRAY_SIZE(se770x_ipr_map));
+	register_ipr_controller(&ipr_irq_desc);
 }

arch/sh/boards/se/770x/setup.c

@@ -122,7 +122,7 @@ device_initcall(se_devices_setup);
 /*
  * The Machine Vector
  */
-struct sh_machine_vector mv_se __initmv = {
+static struct sh_machine_vector mv_se __initmv = {
 	.mv_name		= "SolutionEngine",
 	.mv_setup		= smsc_setup,
 #if defined(CONFIG_CPU_SH4)
@@ -160,4 +160,3 @@ struct sh_machine_vector mv_se __initmv = {
 
 	.mv_init_irq		= init_se_IRQ,
 };
-ALIAS_MV(se)

arch/sh/boards/se/7722/irq.c

@@ -19,15 +19,24 @@
 #define INTC_INTMSK0             0xFFD00044
 #define INTC_INTMSKCLR0          0xFFD00064
 
+struct se7722_data {
+	unsigned char irq;
+	unsigned char ipr_idx;
+	unsigned char shift;
+	unsigned short priority;
+	unsigned long addr;
+};
+
+
 static void disable_se7722_irq(unsigned int irq)
 {
-	struct ipr_data *p = get_irq_chip_data(irq);
+	struct se7722_data *p = get_irq_chip_data(irq);
 	ctrl_outw( ctrl_inw( p->addr ) | p->priority , p->addr );
 }
 
 static void enable_se7722_irq(unsigned int irq)
 {
-	struct ipr_data *p = get_irq_chip_data(irq);
+	struct se7722_data *p = get_irq_chip_data(irq);
 	ctrl_outw( ctrl_inw( p->addr ) & ~p->priority , p->addr );
 }
 
@@ -38,7 +47,7 @@ static struct irq_chip se7722_irq_chip __read_mostly = {
 	.mask_ack       = disable_se7722_irq,
 };
 
-static struct ipr_data ipr_irq_table[] = {
+static struct se7722_data ipr_irq_table[] = {
 	/* irq        ,idx,sft, priority     , addr   */
 	{ MRSHPC_IRQ0 , 0 , 0 , MRSHPC_BIT0 , IRQ01_MASK } ,
 	{ MRSHPC_IRQ1 , 0 , 0 , MRSHPC_BIT1 , IRQ01_MASK } ,

arch/sh/boards/se/7722/setup.c

@@ -137,7 +137,7 @@ static void __init se7722_setup(char **cmdline_p)
 /*
  * The Machine Vector
  */
-struct sh_machine_vector mv_se7722 __initmv = {
+static struct sh_machine_vector mv_se7722 __initmv = {
 	.mv_name                = "Solution Engine 7722" ,
 	.mv_setup               = se7722_setup ,
 	.mv_nr_irqs		= 109 ,
@@ -145,4 +145,3 @@ struct sh_machine_vector mv_se7722 __initmv = {
 	.mv_irq_demux           = se7722_irq_demux,
 
 };
-ALIAS_MV(se7722)

arch/sh/boards/se/7751/irq.c

@@ -14,44 +14,31 @@
 #include <asm/irq.h>
 #include <asm/se7751.h>
 
-static struct ipr_data se7751_ipr_map[] = {
-  /* Leave old Solution Engine code in for reference. */
-#if defined(CONFIG_SH_SOLUTION_ENGINE)
-	/*
-	 * Super I/O (Just mimic PC):
-	 *  1: keyboard
-	 *  3: serial 0
-	 *  4: serial 1
-	 *  5: printer
-	 *  6: floppy
-	 *  8: rtc
-	 * 12: mouse
-	 * 14: ide0
-	 */
-	{ 14, BCR_ILCRA, 2, 0x0f-14 },
-	{ 12, BCR_ILCRA, 1, 0x0f-12 },
-	{  8, BCR_ILCRB, 1, 0x0f- 8 },
-	{  6, BCR_ILCRC, 3, 0x0f- 6 },
-	{  5, BCR_ILCRC, 2, 0x0f- 5 },
-	{  4, BCR_ILCRC, 1, 0x0f- 4 },
-	{  3, BCR_ILCRC, 0, 0x0f- 3 },
-	{  1, BCR_ILCRD, 3, 0x0f- 1 },
+static struct ipr_data ipr_irq_table[] = {
+	{ 13, 3, 3, 2 },
+	/* Add additional entries here as drivers are added and tested. */
+};
 
-	{ 10, BCR_ILCRD, 1, 0x0f-10 }, /* LAN */
+static unsigned long ipr_offsets[] = {
+	BCR_ILCRA,
+	BCR_ILCRB,
+	BCR_ILCRC,
+	BCR_ILCRD,
+	BCR_ILCRE,
+	BCR_ILCRF,
+	BCR_ILCRG,
+};
 
-	{  0, BCR_ILCRE, 3, 0x0f- 0 }, /* PCIRQ3 */
-	{ 11, BCR_ILCRE, 2, 0x0f-11 }, /* PCIRQ2 */
-	{  9, BCR_ILCRE, 1, 0x0f- 9 }, /* PCIRQ1 */
-	{  7, BCR_ILCRE, 0, 0x0f- 7 }, /* PCIRQ0 */
+static struct ipr_desc ipr_irq_desc = {
+	.ipr_offsets	= ipr_offsets,
+	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
 
-	/* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */
-	/* NOTE: #2 and #13 are not used on PC */
-	{ 13, BCR_ILCRG, 1, 0x0f-13 }, /* SLOTIRQ2 */
-	{  2, BCR_ILCRG, 0, 0x0f- 2 }, /* SLOTIRQ1 */
-#elif defined(CONFIG_SH_7751_SOLUTION_ENGINE)
-	{ 13, BCR_ILCRD, 3, 2 },
-	/* Add additional entries here as drivers are added and tested. */
-#endif
+	.ipr_data	= ipr_irq_table,
+	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
+
+	.chip = {
+		.name	= "IPR-se7751",
+	},
 };
 
 /*
@@ -59,5 +46,5 @@ static struct ipr_data se7751_ipr_map[] = {
  */
 void __init init_7751se_IRQ(void)
 {
-	make_ipr_irq(se7751_ipr_map, ARRAY_SIZE(se7751_ipr_map));
+	register_ipr_controller(&ipr_irq_desc);
 }

arch/sh/boards/se/7751/setup.c

@@ -48,7 +48,7 @@ __initcall(se7751_devices_setup);
 /*
  * The Machine Vector
  */
-struct sh_machine_vector mv_7751se __initmv = {
+static struct sh_machine_vector mv_7751se __initmv = {
 	.mv_name		= "7751 SolutionEngine",
 	.mv_nr_irqs		= 72,
 
@@ -71,4 +71,3 @@ struct sh_machine_vector mv_7751se __initmv = {
 
 	.mv_init_irq		= init_7751se_IRQ,
 };
-ALIAS_MV(7751se)

arch/sh/boards/se/7780/irq.c

@@ -16,28 +16,6 @@
 #include <asm/io.h>
 #include <asm/se7780.h>
 
-#define INTC_INTMSK0             0xFFD00044
-#define INTC_INTMSKCLR0          0xFFD00064
-
-static void disable_se7780_irq(unsigned int irq)
-{
-	struct intc2_data *p = get_irq_chip_data(irq);
-	ctrl_outl(1 << p->msk_shift, INTC_INTMSK0 + p->msk_offset);
-}
-
-static void enable_se7780_irq(unsigned int irq)
-{
-	struct intc2_data *p = get_irq_chip_data(irq);
-	ctrl_outl(1 << p->msk_shift, INTC_INTMSKCLR0 + p->msk_offset);
-}
-
-static struct irq_chip se7780_irq_chip __read_mostly = {
-	.name           = "SE7780",
-	.mask           = disable_se7780_irq,
-	.unmask         = enable_se7780_irq,
-	.mask_ack       = disable_se7780_irq,
-};
-
 static struct intc2_data intc2_irq_table[] = {
 	{ 2,  0, 31, 0, 31, 3 }, /* daughter board EXTINT1 */
 	{ 4,  0, 30, 0, 30, 3 }, /* daughter board EXTINT2 */
@@ -51,13 +29,24 @@ static struct intc2_data intc2_irq_table[] = {
 	{ 0 , 0, 24, 0, 24, 3 }, /* SM501 */
 };
 
+static struct intc2_desc intc2_irq_desc __read_mostly = {
+	.prio_base	= 0, /* N/A */
+	.msk_base	= 0xffd00044,
+	.mskclr_base	= 0xffd00064,
+
+	.intc2_data	= intc2_irq_table,
+	.nr_irqs	= ARRAY_SIZE(intc2_irq_table),
+
+	.chip = {
+		.name	= "INTC2-se7780",
+	},
+};
+
 /*
  * Initialize IRQ setting
  */
 void __init init_se7780_IRQ(void)
 {
-	int i ;
-
 	/* enable all interrupt at FPGA */
 	ctrl_outw(0, FPGA_INTMSK1);
 	/* mask SM501 interrupt */
@@ -79,11 +68,5 @@ void __init init_se7780_IRQ(void)
 	/* FPGA + 0x0A */
 	ctrl_outw((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3);
 
-	for (i = 0; i < ARRAY_SIZE(intc2_irq_table); i++) {
-		disable_irq_nosync(intc2_irq_table[i].irq);
-		set_irq_chip_and_handler_name( intc2_irq_table[i].irq, &se7780_irq_chip,
-			handle_level_irq, "level");
-		set_irq_chip_data( intc2_irq_table[i].irq, &intc2_irq_table[i] );
-		disable_se7780_irq(intc2_irq_table[i].irq);
-	}
+	register_intc2_controller(&intc2_irq_desc);
 }

arch/sh/boards/se/7780/setup.c

@@ -113,10 +113,9 @@ static void __init se7780_setup(char **cmdline_p)
 /*
  * The Machine Vector
  */
-struct sh_machine_vector mv_se7780 __initmv = {
+static struct sh_machine_vector mv_se7780 __initmv = {
 	.mv_name                = "Solution Engine 7780" ,
 	.mv_setup               = se7780_setup ,
 	.mv_nr_irqs		= 111 ,
 	.mv_init_irq		= init_se7780_IRQ,
 };
-ALIAS_MV(se7780)

arch/sh/boards/sh03/setup.c

@@ -15,17 +15,33 @@
 #include <asm/sh03/sh03.h>
 #include <asm/addrspace.h>
 
-static struct ipr_data sh03_ipr_map[] = {
-	{ IRL0_IRQ, IRL0_IPR_ADDR, IRL0_IPR_POS, IRL0_PRIORITY },
-	{ IRL1_IRQ, IRL1_IPR_ADDR, IRL1_IPR_POS, IRL1_PRIORITY },
-	{ IRL2_IRQ, IRL2_IPR_ADDR, IRL2_IPR_POS, IRL2_PRIORITY },
-	{ IRL3_IRQ, IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY },
+static struct ipr_data ipr_irq_table[] = {
+	{ IRL0_IRQ, 0, IRL0_IPR_POS, IRL0_PRIORITY },
+	{ IRL1_IRQ, 0, IRL1_IPR_POS, IRL1_PRIORITY },
+	{ IRL2_IRQ, 0, IRL2_IPR_POS, IRL2_PRIORITY },
+	{ IRL3_IRQ, 0, IRL3_IPR_POS, IRL3_PRIORITY },
+};
+
+static unsigned long ipr_offsets[] = {
+	INTC_IPRD,
+};
+
+static struct ipr_desc ipr_irq_desc = {
+	.ipr_offsets	= ipr_offsets,
+	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
+
+	.ipr_data	= ipr_irq_table,
+	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
+
+	.chip = {
+		.name	= "IPR-sh03",
+	},
 };
 
 static void __init init_sh03_IRQ(void)
 {
 	ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
-	make_ipr_irq(sh03_ipr_map, ARRAY_SIZE(sh03_ipr_map));
+	register_ipr_controller(&ipr_irq_desc);
 }
 
 extern void *cf_io_base;
@@ -74,11 +90,10 @@ static int __init sh03_devices_setup(void)
 }
 __initcall(sh03_devices_setup);
 
-struct sh_machine_vector mv_sh03 __initmv = {
+static struct sh_machine_vector mv_sh03 __initmv = {
 	.mv_name		= "Interface (CTP/PCI-SH03)",
 	.mv_setup		= sh03_setup,
 	.mv_nr_irqs		= 48,
 	.mv_ioport_map		= sh03_ioport_map,
 	.mv_init_irq		= init_sh03_IRQ,
 };
-ALIAS_MV(sh03)

arch/sh/boards/shmin/setup.c

@@ -6,28 +6,44 @@
  * SHMIN Support.
  */
 #include <linux/init.h>
+#include <linux/irq.h>
 #include <asm/machvec.h>
 #include <asm/shmin.h>
 #include <asm/clock.h>
-#include <asm/irq.h>
 #include <asm/io.h>
 
 #define PFC_PHCR	0xa400010eUL
 #define INTC_ICR1	0xa4000010UL
 #define INTC_IPRC	0xa4000016UL
 
-static struct ipr_data shmin_ipr_map[] = {
-	{ .irq=32, .addr=INTC_IPRC, .shift= 0, .priority=0 },
-	{ .irq=33, .addr=INTC_IPRC, .shift= 4, .priority=0 },
-	{ .irq=34, .addr=INTC_IPRC, .shift= 8, .priority=8 },
-	{ .irq=35, .addr=INTC_IPRC, .shift=12, .priority=0 },
+static struct ipr_data ipr_irq_table[] = {
+	{ 32, 0, 0, 0 },
+	{ 33, 0, 4, 0 },
+	{ 34, 0, 8, 8 },
+	{ 35, 0, 12, 0 },
+};
+
+static unsigned long ipr_offsets[] = {
+	INTC_IPRC,
+};
+
+static struct ipr_desc ipr_irq_desc = {
+	.ipr_offsets	= ipr_offsets,
+	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
+
+	.ipr_data	= ipr_irq_table,
+	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
+
+	.chip = {
+		.name	= "IPR-shmin",
+	},
 };
 
 static void __init init_shmin_irq(void)
 {
 	ctrl_outw(0x2a00, PFC_PHCR);	// IRQ0-3=IRQ
 	ctrl_outw(0x0aaa, INTC_ICR1);	// IRQ0-3=IRQ-mode,Low-active.
-	make_ipr_irq(shmin_ipr_map, ARRAY_SIZE(shmin_ipr_map));
+	register_ipr_controller(&ipr_irq_desc);
 }
 
 static void __iomem *shmin_ioport_map(unsigned long port, unsigned int size)
@@ -43,9 +59,8 @@ static void __iomem *shmin_ioport_map(unsigned long port, unsigned int size)
 
 }
 
-struct sh_machine_vector mv_shmin __initmv = {
+static struct sh_machine_vector mv_shmin __initmv = {
 	.mv_name	= "SHMIN",
 	.mv_init_irq	= init_shmin_irq,
 	.mv_ioport_map	= shmin_ioport_map,
 };
-ALIAS_MV(shmin)

arch/sh/boards/snapgear/setup.c

@@ -68,11 +68,27 @@ module_init(eraseconfig_init);
  * IRL3 = crypto
  */
 
-static struct ipr_data snapgear_ipr_map[] = {
-	make_ipr_irq(IRL0_IRQ, IRL0_IPR_ADDR, IRL0_IPR_POS, IRL0_PRIORITY);
-	make_ipr_irq(IRL1_IRQ, IRL1_IPR_ADDR, IRL1_IPR_POS, IRL1_PRIORITY);
-	make_ipr_irq(IRL2_IRQ, IRL2_IPR_ADDR, IRL2_IPR_POS, IRL2_PRIORITY);
-	make_ipr_irq(IRL3_IRQ, IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY);
+static struct ipr_data ipr_irq_table[] = {
+	{ IRL0_IRQ, 0, IRL0_IPR_POS, IRL0_PRIORITY },
+	{ IRL1_IRQ, 0, IRL1_IPR_POS, IRL1_PRIORITY },
+	{ IRL2_IRQ, 0, IRL2_IPR_POS, IRL2_PRIORITY },
+	{ IRL3_IRQ, 0, IRL3_IPR_POS, IRL3_PRIORITY },
+};
+
+static unsigned long ipr_offsets[] = {
+	INTC_IPRD,
+};
+
+static struct ipr_desc ipr_irq_desc = {
+	.ipr_offsets	= ipr_offsets,
+	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
+
+	.ipr_data	= ipr_irq_table,
+	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
+
+	.chip = {
+		.name	= "IPR-snapgear",
+	},
 };
 
 static void __init init_snapgear_IRQ(void)
@@ -82,7 +98,7 @@ static void __init init_snapgear_IRQ(void)
 
 	printk("Setup SnapGear IRQ/IPR ...\n");
 
-	make_ipr_irq(snapgear_ipr_map, ARRAY_SIZE(snapgear_ipr_map));
+	register_ipr_controller(&ipr_irq_desc);
 }
 
 /*
@@ -96,7 +112,7 @@ static void __init snapgear_setup(char **cmdline_p)
 /*
  * The Machine Vector
  */
-struct sh_machine_vector mv_snapgear __initmv = {
+static struct sh_machine_vector mv_snapgear __initmv = {
 	.mv_name		= "SnapGear SecureEdge5410",
 	.mv_setup		= snapgear_setup,
 	.mv_nr_irqs		= 72,
@@ -117,4 +133,3 @@ struct sh_machine_vector mv_snapgear __initmv = {
 
 	.mv_init_irq		= init_snapgear_IRQ,
 };
-ALIAS_MV(snapgear)

arch/sh/boards/superh/microdev/setup.c

@@ -371,7 +371,7 @@ static void __init microdev_setup(char **cmdline_p)
 /*
  * The Machine Vector
  */
-struct sh_machine_vector mv_sh4202_microdev __initmv = {
+static struct sh_machine_vector mv_sh4202_microdev __initmv = {
 	.mv_name		= "SH4-202 MicroDev",
 	.mv_setup		= microdev_setup,
 	.mv_nr_irqs		= 72,		/* QQQ need to check this - use the MACRO */
@@ -403,4 +403,3 @@ struct sh_machine_vector mv_sh4202_microdev __initmv = {
 	.mv_heartbeat		= microdev_heartbeat,
 #endif
 };
-ALIAS_MV(sh4202_microdev)

arch/sh/boards/titan/setup.c

@@ -12,7 +12,7 @@
 #include <asm/titan.h>
 #include <asm/io.h>
 
-static struct ipr_data titan_ipr_map[] = {
+static struct ipr_data ipr_irq_table[] = {
 	/* IRQ, IPR idx, shift, prio */
 	{ TITAN_IRQ_WAN,   3, 12, 8 },	/* eth0 (WAN) */
 	{ TITAN_IRQ_LAN,   3,  8, 8 },	/* eth1 (LAN) */
@@ -20,15 +20,33 @@ static struct ipr_data titan_ipr_map[] = {
 	{ TITAN_IRQ_USB,   3,  0, 8 },	/* mPCI B (bottom), USB */
 };
 
+static unsigned long ipr_offsets[] = { /* stolen from setup-sh7750.c */
+	0xffd00004UL,	/* 0: IPRA */
+	0xffd00008UL,	/* 1: IPRB */
+	0xffd0000cUL,	/* 2: IPRC */
+	0xffd00010UL,	/* 3: IPRD */
+};
+
+static struct ipr_desc ipr_irq_desc = {
+	.ipr_offsets	= ipr_offsets,
+	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
+
+	.ipr_data	= ipr_irq_table,
+	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
+
+	.chip = {
+		.name	= "IPR-titan",
+	},
+};
 static void __init init_titan_irq(void)
 {
 	/* enable individual interrupt mode for externals */
 	ipr_irq_enable_irlm();
 	/* register ipr irqs */
-	make_ipr_irq(titan_ipr_map, ARRAY_SIZE(titan_ipr_map));
+	register_ipr_controller(&ipr_irq_desc);
 }
 
-struct sh_machine_vector mv_titan __initmv = {
+static struct sh_machine_vector mv_titan __initmv = {
 	.mv_name =	"Titan",
 
 	.mv_inb =	titan_inb,
@@ -52,4 +70,3 @@ struct sh_machine_vector mv_titan __initmv = {
 
 	.mv_init_irq =	init_titan_irq,
 };
-ALIAS_MV(titan)

arch/sh/boards/unknown/Makefile

-#
-# Makefile for unknown SH boards 
-#
-
-obj-y	 := setup.o
-

arch/sh/boards/unknown/setup.c

-/*
- * linux/arch/sh/boards/unknown/setup.c
- *
- * Copyright (C) 2002 Paul Mundt
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * Setup code for an unknown machine (internal peripherals only)
- *
- * This is the simplest of all boards, and serves only as a quick and dirty
- * method to start debugging a new board during bring-up until proper board
- * setup code is written.
- */
-#include <linux/init.h>
-#include <asm/machvec.h>
-
-struct sh_machine_vector mv_unknown __initmv = {
-	.mv_name		= "Unknown",
-};
-ALIAS_MV(unknown)

arch/sh/cchips/Kconfig

@@ -13,10 +13,8 @@ config VOYAGERGX
 	  are additional GPIO bits that can be used to interface to
 	  external as well.
 
-# A board must have defined HD6446X_SERIES in order to see these
 config HD6446X_SERIES
-	bool "HD6446x support"
-	default n
+	bool
 
 choice
 	prompt "HD6446x options"
@@ -25,7 +23,6 @@ choice
 
 config HD64461
 	bool "Hitachi HD64461 companion chip support"
-	depends on CPU_SUBTYPE_SH7709
 	---help---
 	  The Hitachi HD64461 provides an interface for
 	  the SH7709 CPU, supporting a LCD controller,
@@ -40,7 +37,6 @@ config HD64461
 
 config HD64465
 	bool "Hitachi HD64465 companion chip support"
-	depends on CPU_SUBTYPE_SH7750
 	---help---
 	  The Hitachi HD64465 provides an interface for
 	  the SH7750 CPU, supporting a LCD controller,

arch/sh/drivers/dma/Kconfig

@@ -36,23 +36,6 @@ config NR_DMA_CHANNELS
 	  support. Setting this to a higher value allows for cascading DMACs
 	  with additional channels.
 
-config DMA_PAGE_OPS
-	bool "Use DMAC for page copy/clear"
-	depends on SH_DMA && BROKEN
-	help
-	  Selecting this option will use a dual-address mode configured channel
-	  in the SH DMAC for copy_page()/clear_page(). Primarily a performance
-	  hack.
-
-config DMA_PAGE_OPS_CHANNEL
-	depends on DMA_PAGE_OPS
-	int "DMA channel for sh memory-manager page copy/clear"
-	default "3"
-	help
-	  This allows the specification of the dual address dma channel,
-	  in case channel 3 is unavailable. On the SH4, channels 1,2, and 3
-	  are dual-address capable.
-
 config SH_DMABRG
 	bool "SH7760 DMABRG support"
 	depends on CPU_SUBTYPE_SH7760

arch/sh/drivers/pci/Kconfig

 config PCI
 	bool "PCI support"
+	depends on SYS_SUPPORTS_PCI
 	help
 	  Find out whether you have a PCI motherboard. PCI is the name of a
 	  bus system, i.e. the way the CPU talks to the other stuff inside

arch/sh/kernel/Makefile

@@ -4,10 +4,9 @@
 
 extra-y	:= head.o init_task.o vmlinux.lds
 
-obj-y	:= process.o signal.o traps.o irq.o \
-	ptrace.o setup.o time.o sys_sh.o semaphore.o \
-	io.o io_generic.o sh_ksyms.o syscalls.o \
-	debugtraps.o
+obj-y	:= debugtraps.o io.o io_generic.o irq.o machvec.o process.o ptrace.o \
+	   semaphore.o setup.o signal.o sys_sh.o syscalls.o \
+	   time.o topology.o traps.o
 
 obj-y				+= cpu/ timers/
 obj-$(CONFIG_VSYSCALL)		+= vsyscall/
@@ -17,7 +16,7 @@ obj-$(CONFIG_CF_ENABLER)	+= cf-enabler.o
 obj-$(CONFIG_SH_STANDARD_BIOS)	+= sh_bios.o
 obj-$(CONFIG_SH_KGDB)		+= kgdb_stub.o kgdb_jmp.o
 obj-$(CONFIG_SH_CPU_FREQ)	+= cpufreq.o
-obj-$(CONFIG_MODULES)		+= module.o
+obj-$(CONFIG_MODULES)		+= sh_ksyms.o module.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o

arch/sh/kernel/cf-enabler.c

@@ -75,11 +75,7 @@ static int __init cf_init_default(void)
 #if defined(CONFIG_CPU_SH4)
 	allocate_cf_area();
 #endif
-#if defined(CONFIG_SH_UNKNOWN)
-	/* This should be done in each board's init_xxx_irq. */
-	make_imask_irq(14);
-	disable_irq(14);
-#endif
+
 	return 0;
 }
 

arch/sh/kernel/cpu/init.c

@@ -21,8 +21,7 @@
 #include <asm/cacheflush.h>
 #include <asm/cache.h>
 #include <asm/io.h>
-
-extern void detect_cpu_and_cache_system(void);
+#include <asm/ubc.h>
 
 /*
  * Generic wrapper for command line arguments to disable on-chip
@@ -152,15 +151,6 @@ static void __init cache_init(void)
 	flags |= CCR_CACHE_CB;
 #endif
 
-#ifdef CONFIG_SH_OCRAM
-	/* Turn on OCRAM -- halve the OC */
-	flags |= CCR_CACHE_ORA;
-	current_cpu_data.dcache.sets >>= 1;
-
-	current_cpu_data.dcache.way_size = current_cpu_data.dcache.sets *
-				    current_cpu_data.dcache.linesz;
-#endif
-
 	ctrl_outl(flags, CCR);
 	back_to_P1();
 }
@@ -269,7 +259,6 @@ asmlinkage void __init sh_cpu_init(void)
 	}
 #endif
 
-#ifdef CONFIG_UBC_WAKEUP
 	/*
 	 * Some brain-damaged loaders decided it would be a good idea to put
 	 * the UBC to sleep. This causes some issues when it comes to things
@@ -277,7 +266,5 @@ asmlinkage void __init sh_cpu_init(void)
 	 * we wake it up and hope that all is well.
 	 */
 	ubc_wakeup();
-#endif
-
 	speculative_execution_init();
 }

arch/sh/kernel/cpu/irq/intc2.c

@@ -13,36 +13,31 @@
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
+#include <asm/smp.h>
 
-#if defined(CONFIG_CPU_SUBTYPE_SH7760)
-#define INTC2_BASE	0xfe080000
-#define INTC2_INTMSK	(INTC2_BASE + 0x40)
-#define INTC2_INTMSKCLR	(INTC2_BASE + 0x60)
-#elif defined(CONFIG_CPU_SUBTYPE_SH7780) || \
-      defined(CONFIG_CPU_SUBTYPE_SH7785)
-#define INTC2_BASE	0xffd40000
-#define INTC2_INTMSK	(INTC2_BASE + 0x38)
-#define INTC2_INTMSKCLR	(INTC2_BASE + 0x3c)
-#endif
+static inline struct intc2_desc *get_intc2_desc(unsigned int irq)
+{
+	struct irq_chip *chip = get_irq_chip(irq);
+	return (void *)((char *)chip - offsetof(struct intc2_desc, chip));
+}
 
 static void disable_intc2_irq(unsigned int irq)
 {
 	struct intc2_data *p = get_irq_chip_data(irq);
-	ctrl_outl(1 << p->msk_shift, INTC2_INTMSK + p->msk_offset);
+	struct intc2_desc *d = get_intc2_desc(irq);
+
+	ctrl_outl(1 << p->msk_shift, d->msk_base + p->msk_offset +
+				     (hard_smp_processor_id() * 4));
 }
 
 static void enable_intc2_irq(unsigned int irq)
 {
 	struct intc2_data *p = get_irq_chip_data(irq);
-	ctrl_outl(1 << p->msk_shift, INTC2_INTMSKCLR + p->msk_offset);
-}
+	struct intc2_desc *d = get_intc2_desc(irq);
 
-static struct irq_chip intc2_irq_chip = {
-	.name		= "INTC2",
-	.mask		= disable_intc2_irq,
-	.unmask		= enable_intc2_irq,
-	.mask_ack	= disable_intc2_irq,
-};
+	ctrl_outl(1 << p->msk_shift, d->mskclr_base + p->msk_offset +
+				     (hard_smp_processor_id() * 4));
+}
 
 /*
  * Setup an INTC2 style interrupt.
@@ -56,30 +51,36 @@ static struct irq_chip intc2_irq_chip = {
  *
  * in the intc2_data table.
  */
-void make_intc2_irq(struct intc2_data *table, unsigned int nr_irqs)
+void register_intc2_controller(struct intc2_desc *desc)
 {
 	int i;
 
-	for (i = 0; i < nr_irqs; i++) {
+	desc->chip.mask = disable_intc2_irq;
+	desc->chip.unmask = enable_intc2_irq;
+	desc->chip.mask_ack = disable_intc2_irq;
+
+	for (i = 0; i < desc->nr_irqs; i++) {
 		unsigned long ipr, flags;
-		struct intc2_data *p = table + i;
+		struct intc2_data *p = desc->intc2_data + i;
 
 		disable_irq_nosync(p->irq);
 
-		/* Set the priority level */
-		local_irq_save(flags);
+		if (desc->prio_base) {
+			/* Set the priority level */
+			local_irq_save(flags);
 
-		ipr = ctrl_inl(INTC2_BASE + p->ipr_offset);
-		ipr &= ~(0xf << p->ipr_shift);
-		ipr |= p->priority << p->ipr_shift;
-		ctrl_outl(ipr, INTC2_BASE + p->ipr_offset);
+			ipr = ctrl_inl(desc->prio_base + p->ipr_offset);
+			ipr &= ~(0xf << p->ipr_shift);
+			ipr |= p->priority << p->ipr_shift;
+			ctrl_outl(ipr, desc->prio_base + p->ipr_offset);
 
-		local_irq_restore(flags);
+			local_irq_restore(flags);
+		}
 
-		set_irq_chip_and_handler_name(p->irq, &intc2_irq_chip,
+		set_irq_chip_and_handler_name(p->irq, &desc->chip,
 					      handle_level_irq, "level");
 		set_irq_chip_data(p->irq, p);
 
-		enable_intc2_irq(p->irq);
+		disable_intc2_irq(p->irq);
 	}
 }

arch/sh/kernel/cpu/irq/ipr.c

@@ -22,58 +22,57 @@
 #include <linux/io.h>
 #include <linux/interrupt.h>
 
+static inline struct ipr_desc *get_ipr_desc(unsigned int irq)
+{
+	struct irq_chip *chip = get_irq_chip(irq);
+	return (void *)((char *)chip - offsetof(struct ipr_desc, chip));
+}
+
 static void disable_ipr_irq(unsigned int irq)
 {
 	struct ipr_data *p = get_irq_chip_data(irq);
+	unsigned long addr = get_ipr_desc(irq)->ipr_offsets[p->ipr_idx];
 	/* Set the priority in IPR to 0 */
-	ctrl_outw(ctrl_inw(p->addr) & (0xffff ^ (0xf << p->shift)), p->addr);
+	ctrl_outw(ctrl_inw(addr) & (0xffff ^ (0xf << p->shift)), addr);
 }
 
 static void enable_ipr_irq(unsigned int irq)
 {
 	struct ipr_data *p = get_irq_chip_data(irq);
+	unsigned long addr = get_ipr_desc(irq)->ipr_offsets[p->ipr_idx];
 	/* Set priority in IPR back to original value */
-	ctrl_outw(ctrl_inw(p->addr) | (p->priority << p->shift), p->addr);
+	ctrl_outw(ctrl_inw(addr) | (p->priority << p->shift), addr);
 }
 
-static struct irq_chip ipr_irq_chip = {
-	.name		= "IPR",
-	.mask		= disable_ipr_irq,
-	.unmask		= enable_ipr_irq,
-	.mask_ack	= disable_ipr_irq,
-};
-
-unsigned int map_ipridx_to_addr(int idx) __attribute__ ((weak));
-unsigned int map_ipridx_to_addr(int idx)
-{
-	return 0;
-}
+/*
+ * The shift value is now the number of bits to shift, not the number of
+ * bits/4. This is to make it easier to read the value directly from the
+ * datasheets. The IPR address is calculated using the ipr_offset table.
+ */
 
-void make_ipr_irq(struct ipr_data *table, unsigned int nr_irqs)
+void register_ipr_controller(struct ipr_desc *desc)
 {
 	int i;
 
-	for (i = 0; i < nr_irqs; i++) {
-		unsigned int irq = table[i].irq;
+	desc->chip.mask = disable_ipr_irq;
+	desc->chip.unmask = enable_ipr_irq;
+	desc->chip.mask_ack = disable_ipr_irq;
 
-		if (!irq)
-			irq = table[i].irq = i;
+	for (i = 0; i < desc->nr_irqs; i++) {
+		struct ipr_data *p = desc->ipr_data + i;
 
-		/* could the IPR index be mapped, if not we ignore this */
-		if (!table[i].addr) {
-			table[i].addr = map_ipridx_to_addr(table[i].ipr_idx);
-			if (!table[i].addr)
-				continue;
-		}
+		BUG_ON(p->ipr_idx >= desc->nr_offsets);
+		BUG_ON(!desc->ipr_offsets[p->ipr_idx]);
 
-		disable_irq_nosync(irq);
-		set_irq_chip_and_handler_name(irq, &ipr_irq_chip,
+		disable_irq_nosync(p->irq);
+		set_irq_chip_and_handler_name(p->irq, &desc->chip,
 				      handle_level_irq, "level");
-		set_irq_chip_data(irq, &table[i]);
-		enable_ipr_irq(irq);
+		set_irq_chip_data(p->irq, p);
+		disable_ipr_irq(p->irq);
 	}
 }
-EXPORT_SYMBOL(make_ipr_irq);
+
+EXPORT_SYMBOL(register_ipr_controller);
 
 #if !defined(CONFIG_CPU_HAS_PINT_IRQ)
 int ipr_irq_demux(int irq)

arch/sh/kernel/cpu/sh2/entry.S

@@ -311,6 +311,7 @@ restore_all:
 	rte
 	 nop
 
+	.align 2
 #ifdef CONFIG_TRACE_IRQFLAGS
 1:     .long   trace_hardirqs_off
 #endif

arch/sh/kernel/cpu/sh2/probe.c

@@ -9,23 +9,14 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
-
-
 #include <linux/init.h>
+#include <linux/smp.h>
 #include <asm/processor.h>
 #include <asm/cache.h>
 
 int __init detect_cpu_and_cache_system(void)
 {
-#if defined(CONFIG_CPU_SUBTYPE_SH7604)
-	current_cpu_data.type			= CPU_SH7604;
-	current_cpu_data.dcache.ways		= 4;
-	current_cpu_data.dcache.way_incr	= (1<<10);
-	current_cpu_data.dcache.sets		= 64;
-	current_cpu_data.dcache.entry_shift	= 4;
-	current_cpu_data.dcache.linesz		= L1_CACHE_BYTES;
-	current_cpu_data.dcache.flags		= 0;
-#elif defined(CONFIG_CPU_SUBTYPE_SH7619)
+#if defined(CONFIG_CPU_SUBTYPE_SH7619)
 	current_cpu_data.type			= CPU_SH7619;
 	current_cpu_data.dcache.ways		= 4;
 	current_cpu_data.dcache.way_incr	= (1<<12);

arch/sh/kernel/cpu/sh2/setup-sh7619.c

@@ -52,7 +52,7 @@ static int __init sh7619_devices_setup(void)
 }
 __initcall(sh7619_devices_setup);
 
-static struct ipr_data sh7619_ipr_map[] = {
+static struct ipr_data ipr_irq_table[] = {
 	{ 86, 0,  4, 2 },	/* CMI0 */
 	{ 88, 1, 12, 3 },	/* SCIF0_ERI */
 	{ 89, 1, 12, 3 },	/* SCIF0_RXI */
@@ -68,7 +68,7 @@ static struct ipr_data sh7619_ipr_map[] = {
 	{ 99, 1,  4, 3 },	/* SCIF2_TXI */
 };
 
-static unsigned int ipr_offsets[] = {
+static unsigned long ipr_offsets[] = {
 	0xf8080000,	/* IPRC */
 	0xf8080002,	/* IPRD */
 	0xf8080004,	/* IPRE */
@@ -76,15 +76,19 @@ static unsigned int ipr_offsets[] = {
 	0xf8080008,	/* IPRG */
 };
 
-/* given the IPR index return the address of the IPR register */
-unsigned int map_ipridx_to_addr(int idx)
-{
-	if (unlikely(idx >= ARRAY_SIZE(ipr_offsets)))
-		return 0;
-	return ipr_offsets[idx];
-}
+static struct ipr_desc ipr_irq_desc = {
+	.ipr_offsets	= ipr_offsets,
+	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
+
+	.ipr_data	= ipr_irq_table,
+	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
+
+	.chip = {
+		.name	= "IPR-sh7619",
+	},
+};
 
 void __init init_IRQ_ipr(void)
 {
-	make_ipr_irq(sh7619_ipr_map, ARRAY_SIZE(sh7619_ipr_map));
+	register_ipr_controller(&ipr_irq_desc);
 }

arch/sh/kernel/cpu/sh2a/setup-sh7206.c

@@ -57,7 +57,7 @@ static int __init sh7206_devices_setup(void)
 }
 __initcall(sh7206_devices_setup);
 
-static struct ipr_data sh7206_ipr_map[] = {
+static struct ipr_data ipr_irq_table[] = {
 	{ 140,  7, 12, 2 },	/* CMI0 */
 	{ 164,  8,  4, 2 },	/* MTU2_TGI1A */
 	{ 240, 13, 12, 3 },	/* SCIF0_BRI */
@@ -78,7 +78,7 @@ static struct ipr_data sh7206_ipr_map[] = {
 	{ 255, 13,  0, 3 },	/* SCIF3_TXI */
 };
 
-static unsigned int ipr_offsets[] = {
+static unsigned long ipr_offsets[] = {
 	0xfffe0818,	/* IPR01 */
 	0xfffe081a,	/* IPR02 */
 	0,		/* unused */
@@ -95,15 +95,19 @@ static unsigned int ipr_offsets[] = {
 	0xfffe0c10,	/* IPR14 */
 };
 
-/* given the IPR index return the address of the IPR register */
-unsigned int map_ipridx_to_addr(int idx)
-{
-	if (unlikely(idx >= ARRAY_SIZE(ipr_offsets)))
-		return 0;
-	return ipr_offsets[idx];
-}
+static struct ipr_desc ipr_irq_desc = {
+	.ipr_offsets	= ipr_offsets,
+	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
+
+	.ipr_data	= ipr_irq_table,
+	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
+
+	.chip = {
+		.name	= "IPR-sh7206",
+	},
+};
 
 void __init init_IRQ_ipr(void)
 {
-	make_ipr_irq(sh7206_ipr_map, ARRAY_SIZE(sh7206_ipr_map));
+	register_ipr_controller(&ipr_irq_desc);
 }

arch/sh/kernel/cpu/sh3/entry.S

@@ -340,8 +340,27 @@ ENTRY(vbr_base)
 general_exception:
 	mov.l	1f, k2
 	mov.l	2f, k3
+#ifdef CONFIG_CPU_SUBTYPE_SHX3
+	mov.l	@k2, k2
+
+	! Is EXPEVT larger than 0x800?
+	mov	#0x8, k0
+	shll8	k0
+	cmp/hs	k0, k2
+	bf	0f
+
+	! then add 0x580 (k2 is 0xd80 or 0xda0)
+	mov	#0x58, k0
+	shll2	k0
+	shll2	k0
+	add	k0, k2
+0:
+	bra	handle_exception
+	 nop
+#else
 	bra	handle_exception
 	 mov.l	@k2, k2
+#endif
 	.align	2
 1:	.long	EXPEVT
 2:	.long	ret_from_exception

arch/sh/kernel/cpu/sh4/Makefile

@@ -10,7 +10,11 @@ obj-$(CONFIG_SH_STORE_QUEUES)		+= sq.o
 
 # CPU subtype setup
 obj-$(CONFIG_CPU_SUBTYPE_SH7750)	+= setup-sh7750.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7750R)	+= setup-sh7750.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7750S)	+= setup-sh7750.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7091)	+= setup-sh7750.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7751)	+= setup-sh7750.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7751R)	+= setup-sh7750.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7760)	+= setup-sh7760.o
 obj-$(CONFIG_CPU_SUBTYPE_SH4_202)	+= setup-sh4-202.o
 

arch/sh/kernel/cpu/sh4/probe.c

@@ -141,6 +141,14 @@ int __init detect_cpu_and_cache_system(void)
 			current_cpu_data.flags |= CPU_HAS_LLSC;
 		}
 		break;
+	case 0x4000:	/* 1st cut */
+	case 0x4001:	/* 2nd cut */
+		current_cpu_data.type = CPU_SHX3;
+		current_cpu_data.icache.ways = 4;
+		current_cpu_data.dcache.ways = 4;
+		current_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER |
+					  CPU_HAS_LLSC;
+		break;
 	case 0x8000:
 		current_cpu_data.type = CPU_ST40RA;
 		current_cpu_data.flags |= CPU_HAS_FPU;

arch/sh/kernel/cpu/sh4a/Makefile

@@ -9,6 +9,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7785)	+= setup-sh7785.o
 obj-$(CONFIG_CPU_SUBTYPE_SH73180)	+= setup-sh73180.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7343)	+= setup-sh7343.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7722)	+= setup-sh7722.o
+obj-$(CONFIG_CPU_SUBTYPE_SHX3)		+= setup-shx3.o
 
 # Primary on-chip clocks (common)
 clock-$(CONFIG_CPU_SUBTYPE_SH73180)	:= clock-sh73180.o
@@ -17,5 +18,6 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7780)	:= clock-sh7780.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7785)	:= clock-sh7785.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7343)	:= clock-sh7343.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7722)	:= clock-sh7722.o
+clock-$(CONFIG_CPU_SUBTYPE_SHX3)	:= clock-shx3.o
 
 obj-y	+= $(clock-y)