Commit bf1178c9 authored by Sean Paul's avatar Sean Paul

drm/bridge: ti-sn65dsi86: Add mystery delay to enable()

This patch adds a 70ms mystery delay to the bridge driver in enable.
By experimentation, it seems like it can go anywhere up until we
initiate semi-auto link training. If we don't have the delay, link
training fails.

I tried to root cause this as best I could, but neither the datasheet
for the panel nor the bridge mention a delay of this magnitude in their
timing requirements. So for now, add the mystery delay until someone
figures out a better fix.

Changes in v3:
- Added to the set

Cc: Sandeep Panda <spanda@codeaurora.org>
Reviewed-by: default avatarSandeep Panda <spanda@codeaurora.org>
Signed-off-by: default avatarSean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180813213058.184821-8-sean@poorly.run
parent bc537a9c
......@@ -458,6 +458,18 @@ static void ti_sn_bridge_enable(struct drm_bridge *bridge)
unsigned int val;
int ret;
/*
* FIXME:
* This 70ms was found necessary by experimentation. If it's not
* present, link training fails. It seems like it can go anywhere from
* pre_enable() up to semi-auto link training initiation below.
*
* Neither the datasheet for the bridge nor the panel tested mention a
* delay of this magnitude in the timing requirements. So for now, add
* the mystery delay until someone figures out a better fix.
*/
msleep(70);
/* DSI_A lane config */
val = CHA_DSI_LANES(4 - pdata->dsi->lanes);
regmap_update_bits(pdata->regmap, SN_DSI_LANES_REG,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment