net: convert additional drivers to use phy_do_ioctl

The first batch of driver conversions missed a few cases where we can
use phy_do_ioctl too.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/aurora/nb8800.c

@@ -1005,18 +1005,13 @@ static int nb8800_stop(struct net_device *dev)
 	return 0;
 }
 
-static int nb8800_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-{
-	return phy_mii_ioctl(dev->phydev, rq, cmd);
-}
-
 static const struct net_device_ops nb8800_netdev_ops = {
 	.ndo_open		= nb8800_open,
 	.ndo_stop		= nb8800_stop,
 	.ndo_start_xmit		= nb8800_xmit,
 	.ndo_set_mac_address	= nb8800_set_mac_address,
 	.ndo_set_rx_mode	= nb8800_set_rx_mode,
-	.ndo_do_ioctl		= nb8800_ioctl,
+	.ndo_do_ioctl		= phy_do_ioctl,
 	.ndo_validate_addr	= eth_validate_addr,
 };
 

drivers/net/ethernet/cavium/octeon/octeon_mgmt.c

@@ -790,9 +790,7 @@ static int octeon_mgmt_ioctl(struct net_device *netdev,
 	case SIOCSHWTSTAMP:
 		return octeon_mgmt_ioctl_hwtstamp(netdev, rq, cmd);
 	default:
-		if (netdev->phydev)
-			return phy_mii_ioctl(netdev->phydev, rq, cmd);
-		return -EINVAL;
+		return phy_do_ioctl(netdev, rq, cmd);
 	}
 }
 

drivers/net/ethernet/lantiq_etop.c

@@ -509,13 +509,6 @@ ltq_etop_change_mtu(struct net_device *dev, int new_mtu)
 	return 0;
 }
 
-static int
-ltq_etop_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-{
-	/* TODO: mii-toll reports "No MII transceiver present!." ?!*/
-	return phy_mii_ioctl(dev->phydev, rq, cmd);
-}
-
 static int
 ltq_etop_set_mac_address(struct net_device *dev, void *p)
 {
@@ -616,7 +609,7 @@ static const struct net_device_ops ltq_eth_netdev_ops = {
 	.ndo_stop = ltq_etop_stop,
 	.ndo_start_xmit = ltq_etop_tx,
 	.ndo_change_mtu = ltq_etop_change_mtu,
-	.ndo_do_ioctl = ltq_etop_ioctl,
+	.ndo_do_ioctl = phy_do_ioctl,
 	.ndo_set_mac_address = ltq_etop_set_mac_address,
 	.ndo_validate_addr = eth_validate_addr,
 	.ndo_set_rx_mode = ltq_etop_set_multicast_list,

drivers/net/ethernet/marvell/pxa168_eth.c

@@ -1344,15 +1344,6 @@ static int pxa168_smi_write(struct mii_bus *bus, int phy_addr, int regnum,
 	return 0;
 }
 
-static int pxa168_eth_do_ioctl(struct net_device *dev, struct ifreq *ifr,
-			       int cmd)
-{
-	if (dev->phydev)
-		return phy_mii_ioctl(dev->phydev, ifr, cmd);
-
-	return -EOPNOTSUPP;
-}
-
 #ifdef CONFIG_NET_POLL_CONTROLLER
 static void pxa168_eth_netpoll(struct net_device *dev)
 {
@@ -1387,7 +1378,7 @@ static const struct net_device_ops pxa168_eth_netdev_ops = {
 	.ndo_set_rx_mode	= pxa168_eth_set_rx_mode,
 	.ndo_set_mac_address	= pxa168_eth_set_mac_address,
 	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_do_ioctl		= pxa168_eth_do_ioctl,
+	.ndo_do_ioctl		= phy_do_ioctl,
 	.ndo_change_mtu		= pxa168_eth_change_mtu,
 	.ndo_tx_timeout		= pxa168_eth_tx_timeout,
 #ifdef CONFIG_NET_POLL_CONTROLLER

drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c

@@ -1939,9 +1939,7 @@ static int sxgbe_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 	case SIOCGMIIPHY:
 	case SIOCGMIIREG:
 	case SIOCSMIIREG:
-		if (!dev->phydev)
-			return -EINVAL;
-		ret = phy_mii_ioctl(dev->phydev, rq, cmd);
+		ret = phy_do_ioctl(dev, rq, cmd);
 		break;
 	default:
 		break;

drivers/net/ethernet/socionext/netsec.c

@@ -1740,12 +1740,6 @@ static int netsec_netdev_set_features(struct net_device *ndev,
 	return 0;
 }
 
-static int netsec_netdev_ioctl(struct net_device *ndev, struct ifreq *ifr,
-			       int cmd)
-{
-	return phy_mii_ioctl(ndev->phydev, ifr, cmd);
-}
-
 static int netsec_xdp_xmit(struct net_device *ndev, int n,
 			   struct xdp_frame **frames, u32 flags)
 {
@@ -1830,7 +1824,7 @@ static const struct net_device_ops netsec_netdev_ops = {
 	.ndo_set_features	= netsec_netdev_set_features,
 	.ndo_set_mac_address    = eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_do_ioctl		= netsec_netdev_ioctl,
+	.ndo_do_ioctl		= phy_do_ioctl,
 	.ndo_xdp_xmit		= netsec_xdp_xmit,
 	.ndo_bpf		= netsec_xdp,
 };