Commit cc2b9554 authored by David Mosberger's avatar David Mosberger

Merge tiger.hpl.hp.com:/data1/bk/vanilla/linux-2.5

into tiger.hpl.hp.com:/data1/bk/lia64/to-linus-2.5
parents 467578b9 560327eb
......@@ -53,6 +53,15 @@ struct disk_stat {
#include "../kernel/fw-emu.c"
/*
* Set a break point on this function so that symbols are available to set breakpoints in
* the kernel being debugged.
*/
static void
debug_break (void)
{
}
static void
cons_write (const char *buf)
{
......@@ -187,6 +196,7 @@ _start (void)
ssc(0, (long) kpath, 0, 0, SSC_LOAD_SYMBOLS);
debug_break();
asm volatile ("mov sp=%2; mov r28=%1; br.sptk.few %0"
:: "b"(e_entry), "r"(bp), "r"(__pa(&stack)));
......
......@@ -162,9 +162,11 @@ ia32_setup_arg_pages (struct linux_binprm *bprm)
{
unsigned long stack_base;
struct vm_area_struct *mpnt;
struct mm_struct *mm = current->mm;
int i;
stack_base = IA32_STACK_TOP - MAX_ARG_PAGES*PAGE_SIZE;
mm->arg_start = bprm->p + stack_base;
bprm->p += stack_base;
if (bprm->loader)
......@@ -175,6 +177,11 @@ ia32_setup_arg_pages (struct linux_binprm *bprm)
if (!mpnt)
return -ENOMEM;
if (!vm_enough_memory((IA32_STACK_TOP - (PAGE_MASK & (unsigned long) bprm->p))>>PAGE_SHIFT)) {
kmem_cache_free(vm_area_cachep, mpnt);
return -ENOMEM;
}
down_write(&current->mm->mmap_sem);
{
mpnt->vm_mm = current->mm;
......
......@@ -196,7 +196,7 @@ ia32_syscall_table:
data8 sys32_fork
data8 sys_read
data8 sys_write
data8 sys_open /* 5 */
data8 sys32_open /* 5 */
data8 sys_close
data8 sys32_waitpid
data8 sys_creat
......
......@@ -165,10 +165,10 @@ copy_siginfo_to_user32 (siginfo_t32 *to, siginfo_t *from)
* sw ar.fsr(0:15)
* tag ar.fsr(16:31) with odd numbered bits not used
* (read returns 0, writes ignored)
* ipoff ar.fir(0:31) RO
* cssel ar.fir(32:47) RO
* dataoff ar.fdr(0:31) RO
* datasel ar.fdr(32:47) RO
* ipoff ar.fir(0:31)
* cssel ar.fir(32:47)
* dataoff ar.fdr(0:31)
* datasel ar.fdr(32:47)
*
* _st[(0+TOS)%8] f8
* _st[(1+TOS)%8] f9 (f8, f9 from ptregs)
......@@ -328,7 +328,7 @@ restore_ia32_fpstate_live (struct _fpstate_ia32 *save)
unsigned long num64, mxcsr;
struct _fpreg_ia32 *fpregp;
char buf[32];
unsigned long fsr, fcr;
unsigned long fsr, fcr, fir, fdr;
int fp_tos, fr8_st_map;
if (!access_ok(VERIFY_READ, save, sizeof(*save)))
......@@ -345,6 +345,8 @@ restore_ia32_fpstate_live (struct _fpstate_ia32 *save)
*/
asm volatile ( "mov %0=ar.fsr;" : "=r"(fsr));
asm volatile ( "mov %0=ar.fcr;" : "=r"(fcr));
asm volatile ( "mov %0=ar.fir;" : "=r"(fir));
asm volatile ( "mov %0=ar.fdr;" : "=r"(fdr));
__get_user(mxcsr, (unsigned int *)&save->mxcsr);
/* setting bits 0..5 8..12 with cw and 39..47 from mxcsr */
......@@ -355,14 +357,34 @@ restore_ia32_fpstate_live (struct _fpstate_ia32 *save)
/* setting bits 0..31 with sw and tag and 32..37 from mxcsr */
__get_user(lo, (unsigned int *)&save->sw);
/* set bits 15,7 (fsw.b, fsw.es) to reflect the current error status */
if ( !(lo & 0x7f) )
lo &= (~0x8080);
__get_user(hi, (unsigned int *)&save->tag);
num64 = mxcsr & 0x3f;
num64 = (num64 << 16) | (hi & 0xffff);
num64 = (num64 << 16) | (lo & 0xffff);
fsr = (fsr & (~0x3fffffffff)) | num64;
/* setting bits 0..47 with cssel and ipoff */
__get_user(lo, (unsigned int *)&save->ipoff);
__get_user(hi, (unsigned int *)&save->cssel);
num64 = hi & 0xffff;
num64 = (num64 << 32) | lo;
fir = (fir & (~0xffffffffffff)) | num64;
/* setting bits 0..47 with datasel and dataoff */
__get_user(lo, (unsigned int *)&save->dataoff);
__get_user(hi, (unsigned int *)&save->datasel);
num64 = hi & 0xffff;
num64 = (num64 << 32) | lo;
fdr = (fdr & (~0xffffffffffff)) | num64;
asm volatile ( "mov ar.fsr=%0;" :: "r"(fsr));
asm volatile ( "mov ar.fcr=%0;" :: "r"(fcr));
asm volatile ( "mov ar.fir=%0;" :: "r"(fir));
asm volatile ( "mov ar.fdr=%0;" :: "r"(fdr));
/*
* restore f8, f9 onto pt_regs
* restore f10..f15 onto live registers
......
......@@ -2898,57 +2898,152 @@ get_fpreg (int regno, struct _fpreg_ia32 *reg, struct pt_regs *ptp, struct switc
}
static int
save_ia32_fpstate (struct task_struct *tsk, struct _fpstate_ia32 *save)
save_ia32_fpstate (struct task_struct *tsk, struct ia32_user_i387_struct *save)
{
struct switch_stack *swp;
struct pt_regs *ptp;
int i, tos;
if (!access_ok(VERIFY_WRITE, save, sizeof(*save)))
return -EIO;
__put_user(tsk->thread.fcr, &save->cw);
__put_user(tsk->thread.fsr, &save->sw);
__put_user(tsk->thread.fsr >> 32, &save->tag);
__put_user(tsk->thread.fir, &save->ipoff);
__put_user(__USER_CS, &save->cssel);
__put_user(tsk->thread.fdr, &save->dataoff);
__put_user(__USER_DS, &save->datasel);
return -EFAULT;
__put_user(tsk->thread.fcr & 0xffff, &save->cwd);
__put_user(tsk->thread.fsr & 0xffff, &save->swd);
__put_user((tsk->thread.fsr>>16) & 0xffff, &save->twd);
__put_user(tsk->thread.fir, &save->fip);
__put_user((tsk->thread.fir>>32) & 0xffff, &save->fcs);
__put_user(tsk->thread.fdr, &save->foo);
__put_user((tsk->thread.fdr>>32) & 0xffff, &save->fos);
/*
* Stack frames start with 16-bytes of temp space
*/
swp = (struct switch_stack *)(tsk->thread.ksp + 16);
ptp = ia64_task_regs(tsk);
tos = (tsk->thread.fsr >> 11) & 3;
tos = (tsk->thread.fsr >> 11) & 7;
for (i = 0; i < 8; i++)
put_fpreg(i, &save->_st[i], ptp, swp, tos);
put_fpreg(i, (struct _fpreg_ia32 *)&save->st_space[4*i], ptp, swp, tos);
return 0;
}
static int
restore_ia32_fpstate (struct task_struct *tsk, struct _fpstate_ia32 *save)
restore_ia32_fpstate (struct task_struct *tsk, struct ia32_user_i387_struct *save)
{
struct switch_stack *swp;
struct pt_regs *ptp;
int i, tos, ret;
int fsrlo, fsrhi;
int i, tos;
unsigned int fsrlo, fsrhi, num32;
if (!access_ok(VERIFY_READ, save, sizeof(*save)))
return(-EIO);
ret = __get_user(tsk->thread.fcr, (unsigned int *)&save->cw);
ret |= __get_user(fsrlo, (unsigned int *)&save->sw);
ret |= __get_user(fsrhi, (unsigned int *)&save->tag);
tsk->thread.fsr = ((long)fsrhi << 32) | (long)fsrlo;
ret |= __get_user(tsk->thread.fir, (unsigned int *)&save->ipoff);
ret |= __get_user(tsk->thread.fdr, (unsigned int *)&save->dataoff);
return(-EFAULT);
__get_user(num32, (unsigned int *)&save->cwd);
tsk->thread.fcr = (tsk->thread.fcr & (~0x1f3f)) | (num32 & 0x1f3f);
__get_user(fsrlo, (unsigned int *)&save->swd);
__get_user(fsrhi, (unsigned int *)&save->twd);
num32 = (fsrhi << 16) | fsrlo;
tsk->thread.fsr = (tsk->thread.fsr & (~0xffffffff)) | num32;
__get_user(num32, (unsigned int *)&save->fip);
tsk->thread.fir = (tsk->thread.fir & (~0xffffffff)) | num32;
__get_user(num32, (unsigned int *)&save->foo);
tsk->thread.fdr = (tsk->thread.fdr & (~0xffffffff)) | num32;
/*
* Stack frames start with 16-bytes of temp space
*/
swp = (struct switch_stack *)(tsk->thread.ksp + 16);
ptp = ia64_task_regs(tsk);
tos = (tsk->thread.fsr >> 11) & 3;
tos = (tsk->thread.fsr >> 11) & 7;
for (i = 0; i < 8; i++)
get_fpreg(i, &save->_st[i], ptp, swp, tos);
return ret ? -EFAULT : 0;
get_fpreg(i, (struct _fpreg_ia32 *)&save->st_space[4*i], ptp, swp, tos);
return 0;
}
static int
save_ia32_fpxstate (struct task_struct *tsk, struct ia32_user_fxsr_struct *save)
{
struct switch_stack *swp;
struct pt_regs *ptp;
int i, tos;
unsigned long mxcsr=0;
unsigned long num128[2];
if (!access_ok(VERIFY_WRITE, save, sizeof(*save)))
return -EFAULT;
__put_user(tsk->thread.fcr & 0xffff, &save->cwd);
__put_user(tsk->thread.fsr & 0xffff, &save->swd);
__put_user((tsk->thread.fsr>>16) & 0xffff, &save->twd);
__put_user(tsk->thread.fir, &save->fip);
__put_user((tsk->thread.fir>>32) & 0xffff, &save->fcs);
__put_user(tsk->thread.fdr, &save->foo);
__put_user((tsk->thread.fdr>>32) & 0xffff, &save->fos);
/*
* Stack frames start with 16-bytes of temp space
*/
swp = (struct switch_stack *)(tsk->thread.ksp + 16);
ptp = ia64_task_regs(tsk);
tos = (tsk->thread.fsr >> 11) & 7;
for (i = 0; i < 8; i++)
put_fpreg(i, (struct _fpxreg_ia32 *)&save->st_space[4*i], ptp, swp, tos);
mxcsr = ((tsk->thread.fcr>>32) & 0xff80) | ((tsk->thread.fsr>>32) & 0x3f);
__put_user(mxcsr & 0xffff, &save->mxcsr);
for (i = 0; i < 8; i++) {
memcpy(&(num128[0]), &(swp->f16) + i*2, sizeof(unsigned long));
memcpy(&(num128[1]), &(swp->f17) + i*2, sizeof(unsigned long));
copy_to_user(&save->xmm_space[0] + 4*i, num128, sizeof(struct _xmmreg_ia32));
}
return 0;
}
static int
restore_ia32_fpxstate (struct task_struct *tsk, struct ia32_user_fxsr_struct *save)
{
struct switch_stack *swp;
struct pt_regs *ptp;
int i, tos;
unsigned int fsrlo, fsrhi, num32;
int mxcsr;
unsigned long num64;
unsigned long num128[2];
if (!access_ok(VERIFY_READ, save, sizeof(*save)))
return(-EFAULT);
__get_user(num32, (unsigned int *)&save->cwd);
tsk->thread.fcr = (tsk->thread.fcr & (~0x1f3f)) | (num32 & 0x1f3f);
__get_user(fsrlo, (unsigned int *)&save->swd);
__get_user(fsrhi, (unsigned int *)&save->twd);
num32 = (fsrhi << 16) | fsrlo;
tsk->thread.fsr = (tsk->thread.fsr & (~0xffffffff)) | num32;
__get_user(num32, (unsigned int *)&save->fip);
tsk->thread.fir = (tsk->thread.fir & (~0xffffffff)) | num32;
__get_user(num32, (unsigned int *)&save->foo);
tsk->thread.fdr = (tsk->thread.fdr & (~0xffffffff)) | num32;
/*
* Stack frames start with 16-bytes of temp space
*/
swp = (struct switch_stack *)(tsk->thread.ksp + 16);
ptp = ia64_task_regs(tsk);
tos = (tsk->thread.fsr >> 11) & 7;
for (i = 0; i < 8; i++)
get_fpreg(i, (struct _fpxreg_ia32 *)&save->st_space[4*i], ptp, swp, tos);
__get_user(mxcsr, (unsigned int *)&save->mxcsr);
num64 = mxcsr & 0xff10;
tsk->thread.fcr = (tsk->thread.fcr & (~0xff1000000000)) | (num64<<32);
num64 = mxcsr & 0x3f;
tsk->thread.fsr = (tsk->thread.fsr & (~0x3f00000000)) | (num64<<32);
for (i = 0; i < 8; i++) {
copy_from_user(num128, &save->xmm_space[0] + 4*i, sizeof(struct _xmmreg_ia32));
memcpy(&(swp->f16) + i*2, &(num128[0]), sizeof(unsigned long));
memcpy(&(swp->f17) + i*2, &(num128[1]), sizeof(unsigned long));
}
return 0;
}
extern asmlinkage long sys_ptrace (long, pid_t, unsigned long, unsigned long, long, long, long,
......@@ -3060,11 +3155,19 @@ sys32_ptrace (int request, pid_t pid, unsigned int addr, unsigned int data,
break;
case IA32_PTRACE_GETFPREGS:
ret = save_ia32_fpstate(child, (struct _fpstate_ia32 *) A(data));
ret = save_ia32_fpstate(child, (struct ia32_user_i387_struct *) A(data));
break;
case IA32_PTRACE_GETFPXREGS:
ret = save_ia32_fpxstate(child, (struct ia32_user_fxsr_struct *) A(data));
break;
case IA32_PTRACE_SETFPREGS:
ret = restore_ia32_fpstate(child, (struct _fpstate_ia32 *) A(data));
ret = restore_ia32_fpstate(child, (struct ia32_user_i387_struct *) A(data));
break;
case IA32_PTRACE_SETFPXREGS:
ret = restore_ia32_fpxstate(child, (struct ia32_user_fxsr_struct *) A(data));
break;
case PTRACE_SYSCALL: /* continue, stop after next syscall */
......@@ -3700,6 +3803,37 @@ sys32_brk (unsigned int brk)
return ret;
}
/*
* Exactly like fs/open.c:sys_open(), except that it doesn't set the O_LARGEFILE flag.
*/
asmlinkage long
sys32_open (const char * filename, int flags, int mode)
{
char * tmp;
int fd, error;
tmp = getname(filename);
fd = PTR_ERR(tmp);
if (!IS_ERR(tmp)) {
fd = get_unused_fd();
if (fd >= 0) {
struct file *f = filp_open(tmp, flags, mode);
error = PTR_ERR(f);
if (IS_ERR(f))
goto out_error;
fd_install(fd, f);
}
out:
putname(tmp);
}
return fd;
out_error:
put_unused_fd(fd);
fd = error;
goto out;
}
#ifdef NOTYET /* UNTESTED FOR IA64 FROM HERE DOWN */
struct ncp_mount_data32 {
......
......@@ -306,7 +306,7 @@ efi_memmap_walk (efi_freemem_callback_t callback, void *arg)
u64 start;
u64 end;
} prev, curr;
void *efi_map_start, *efi_map_end, *p, *q;
void *efi_map_start, *efi_map_end, *p, *q, *r;
efi_memory_desc_t *md, *check_md;
u64 efi_desc_size, start, end, granule_addr, first_non_wb_addr = 0;
......@@ -351,11 +351,10 @@ efi_memmap_walk (efi_freemem_callback_t callback, void *arg)
if (!(first_non_wb_addr > granule_addr))
continue; /* couldn't find enough contiguous memory */
}
/* BUG_ON((md->phys_addr >> IA64_GRANULE_SHIFT) < first_non_wb_addr); */
trim_top(md, first_non_wb_addr);
for (r = p; r < q; r += efi_desc_size)
trim_top(r, first_non_wb_addr);
}
if (is_available_memory(md)) {
if (md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT) > mem_limit) {
......
......@@ -1160,7 +1160,7 @@ sys_call_table:
data8 sys_mlock
data8 sys_mlockall
data8 sys_mprotect // 1155
data8 sys_mremap
data8 ia64_mremap
data8 sys_msync
data8 sys_munlock
data8 sys_munlockall
......
......@@ -20,7 +20,13 @@
#define MB (1024*1024UL)
#define NUM_MEM_DESCS 3
#define SIMPLE_MEMMAP 1
#if SIMPLE_MEMMAP
# define NUM_MEM_DESCS 4
#else
# define NUM_MEM_DESCS 16
#endif
static char fw_mem[( sizeof(struct ia64_boot_param)
+ sizeof(efi_system_table_t)
......@@ -379,6 +385,17 @@ sys_fw_init (const char *args, int arglen)
struct ia64_boot_param *bp;
unsigned char checksum = 0;
char *cp, *cmd_line;
int i = 0;
# define MAKE_MD(typ, attr, start, end) \
do { \
md = efi_memmap + i++; \
md->type = typ; \
md->pad = 0; \
md->phys_addr = start; \
md->virt_addr = 0; \
md->num_pages = (end - start) >> 12; \
md->attribute = attr; \
} while (0)
memset(fw_mem, 0, sizeof(fw_mem));
......@@ -464,47 +481,29 @@ sys_fw_init (const char *args, int arglen)
sal_systab->checksum = -checksum;
#if SIMPLE_MEMMAP
/* simulate free memory at physical address zero */
md = &efi_memmap[0];
md->type = EFI_BOOT_SERVICES_DATA;
md->pad = 0;
md->phys_addr = 0*MB;
md->virt_addr = 0;
md->num_pages = (1*MB) >> 12; /* 1MB (in 4KB pages) */
md->attribute = EFI_MEMORY_WB;
/* fill in a memory descriptor: */
md = &efi_memmap[1];
md->type = EFI_CONVENTIONAL_MEMORY;
md->pad = 0;
md->phys_addr = 2*MB;
md->virt_addr = 0;
md->num_pages = (128*MB) >> 12; /* 128MB (in 4KB pages) */
md->attribute = EFI_MEMORY_WB;
/* descriptor for firmware emulator: */
md = &efi_memmap[2];
md->type = EFI_PAL_CODE;
md->pad = 0;
md->phys_addr = 1*MB;
md->virt_addr = 1*MB;
md->num_pages = (1*MB) >> 12; /* 1MB (in 4KB pages) */
md->attribute = EFI_MEMORY_WB;
#if 0
/*
* XXX bootmem is broken for now... (remember to NUM_MEM_DESCS
* if you re-enable this!)
*/
/* descriptor for high memory (>4GB): */
md = &efi_memmap[3];
md->type = EFI_CONVENTIONAL_MEMORY;
md->pad = 0;
md->phys_addr = 4096*MB;
md->virt_addr = 0;
md->num_pages = (32*MB) >> 12; /* 32MB (in 4KB pages) */
md->attribute = EFI_MEMORY_WB;
MAKE_MD(EFI_BOOT_SERVICES_DATA, EFI_MEMORY_WB, 0*MB, 1*MB);
MAKE_MD(EFI_PAL_CODE, EFI_MEMORY_WB, 1*MB, 2*MB);
MAKE_MD(EFI_CONVENTIONAL_MEMORY, EFI_MEMORY_WB, 2*MB, 130*MB);
MAKE_MD(EFI_CONVENTIONAL_MEMORY, EFI_MEMORY_WB, 4096*MB, 4128*MB);
#else
MAKE_MD( 4, 0x9, 0x0000000000000000, 0x0000000000001000);
MAKE_MD( 7, 0x9, 0x0000000000001000, 0x000000000008a000);
MAKE_MD( 4, 0x9, 0x000000000008a000, 0x00000000000a0000);
MAKE_MD( 5, 0x8000000000000009, 0x00000000000c0000, 0x0000000000100000);
MAKE_MD( 7, 0x9, 0x0000000000100000, 0x0000000004400000);
MAKE_MD( 2, 0x9, 0x0000000004400000, 0x0000000004be5000);
MAKE_MD( 7, 0x9, 0x0000000004be5000, 0x000000007f77e000);
MAKE_MD( 6, 0x8000000000000009, 0x000000007f77e000, 0x000000007fb94000);
MAKE_MD( 6, 0x8000000000000009, 0x000000007fb94000, 0x000000007fb95000);
MAKE_MD( 6, 0x8000000000000009, 0x000000007fb95000, 0x000000007fc00000);
MAKE_MD(13, 0x8000000000000009, 0x000000007fc00000, 0x000000007fc3a000);
MAKE_MD( 7, 0x9, 0x000000007fc3a000, 0x000000007fea0000);
MAKE_MD( 5, 0x8000000000000009, 0x000000007fea0000, 0x000000007fea8000);
MAKE_MD( 7, 0x9, 0x000000007fea8000, 0x000000007feab000);
MAKE_MD( 5, 0x8000000000000009, 0x000000007feab000, 0x000000007ffff000);
MAKE_MD( 7, 0x9, 0x00000000ff400000, 0x0000000104000000);
#endif
bp->efi_systab = __pa(&fw_mem);
......
......@@ -86,7 +86,7 @@ EXPORT_SYMBOL(cpu_online_map);
EXPORT_SYMBOL(ia64_cpu_to_sapicid);
#else /* !CONFIG_SMP */
EXPORT_SYMBOL(__flush_tlb_all);
EXPORT_SYMBOL(local_flush_tlb_all);
#endif /* !CONFIG_SMP */
......
......@@ -69,10 +69,10 @@ u64 ia64_mca_stackframe[32];
u64 ia64_mca_bspstore[1024];
u64 ia64_init_stack[KERNEL_STACK_SIZE] __attribute__((aligned(16)));
u64 ia64_mca_sal_data_area[1356];
u64 ia64_mca_min_state_save_info;
u64 ia64_tlb_functional;
u64 ia64_os_mca_recovery_successful;
/* TODO: need to assign min-state structure to UC memory */
u64 ia64_mca_min_state_save_info[MIN_STATE_AREA_SIZE] __attribute__((aligned(512)));
static void ia64_mca_wakeup_ipi_wait(void);
static void ia64_mca_wakeup(int cpu);
static void ia64_mca_wakeup_all(void);
......@@ -116,7 +116,7 @@ static struct irqaction mca_cpe_irqaction = {
* Outputs : platform error status
*/
int
ia64_mca_log_sal_error_record(int sal_info_type)
ia64_mca_log_sal_error_record(int sal_info_type, int called_from_init)
{
int platform_err = 0;
......@@ -131,7 +131,10 @@ ia64_mca_log_sal_error_record(int sal_info_type)
*/
platform_err = ia64_log_print(sal_info_type, (prfunc_t)printk);
ia64_sal_clear_state_info(sal_info_type);
/* temporary: only clear SAL logs on hardware-corrected errors
or if we're logging an error after an MCA-initiated reboot */
if ((sal_info_type > 1) || (called_from_init))
ia64_sal_clear_state_info(sal_info_type);
return platform_err;
}
......@@ -152,7 +155,7 @@ ia64_mca_cpe_int_handler (int cpe_irq, void *arg, struct pt_regs *ptregs)
IA64_MCA_DEBUG("ia64_mca_cpe_int_handler: received interrupt. vector = %#x\n", cpe_irq);
/* Get the CMC error record and log it */
ia64_mca_log_sal_error_record(SAL_INFO_TYPE_CPE);
ia64_mca_log_sal_error_record(SAL_INFO_TYPE_CPE, 0);
}
/*
......@@ -199,13 +202,15 @@ ia64_mca_init_platform (void)
*
* Outputs : None
*/
void
int
ia64_mca_check_errors (void)
{
/*
* If there is an MCA error record pending, get it and log it.
*/
ia64_mca_log_sal_error_record(SAL_INFO_TYPE_MCA);
ia64_mca_log_sal_error_record(SAL_INFO_TYPE_MCA, 1);
return 0;
}
device_initcall(ia64_mca_check_errors);
......@@ -237,49 +242,26 @@ ia64_mca_register_cpev (int cpev)
#endif /* PLATFORM_MCA_HANDLERS */
static char *min_state_labels[] = {
"nat",
"r1", "r2", "r3", "r4", "r5", "r6", "r7", "r8",
"r9", "r10","r11", "r12","r13","r14", "r15",
"b0r16","b0r17", "b0r18", "b0r19", "b0r20",
"b0r21", "b0r22","b0r23", "b0r24", "b0r25",
"b0r26", "b0r27", "b0r28","b0r29", "b0r30", "b0r31",
"r16", "r17", "r18","r19", "r20", "r21","r22",
"r23", "r24","r25", "r26", "r27","r28", "r29", "r30","r31",
"preds", "br0", "rsc",
"iip", "ipsr", "ifs",
"xip", "xpsr", "xfs"
};
int ia64_pmss_dump_bank0=0; /* dump bank 0 ? */
/*
* routine to process and prepare to dump min_state_save
* information for debugging purposes.
*
*/
void
ia64_process_min_state_save (pal_min_state_area_t *pmss, struct pt_regs *ptregs)
ia64_process_min_state_save (pal_min_state_area_t *pmss)
{
int i, max=57;
u64 *tpmss_ptr=(u64 *)pmss;
int i, max = MIN_STATE_AREA_SIZE;
u64 *tpmss_ptr = (u64 *)pmss;
u64 *return_min_state_ptr = ia64_mca_min_state_save_info;
/* dump out the min_state_area information */
for (i=0;i<max;i++) {
if(!ia64_pmss_dump_bank0) {
if(strncmp("B0",min_state_labels[i],2)==0) {
tpmss_ptr++; /* skip to next entry */
continue;
}
}
printk("%5s=0x%16.16lx ",min_state_labels[i],*tpmss_ptr++);
/* copy min-state register info for eventual return to PAL */
*return_min_state_ptr++ = *tpmss_ptr;
if (((i+1)%3)==0 || ((!strcmp("GR16",min_state_labels[i]))
&& !ia64_pmss_dump_bank0))
printk("\n");
tpmss_ptr++; /* skip to next entry */
}
}
......@@ -525,19 +507,17 @@ ia64_mca_init(void)
ia64_log_init(SAL_INFO_TYPE_CMC);
ia64_log_init(SAL_INFO_TYPE_CPE);
/* Zero the min state save info */
ia64_mca_min_state_save_info = 0;
#if defined(MCA_TEST)
mca_test();
#endif /* #if defined(MCA_TEST) */
printk("Mca related initialization done\n");
#if 0 // Too early in initialization -- error log is lost
/* commented out because this is done elsewhere */
#if 0
/* Do post-failure MCA error logging */
ia64_mca_check_errors();
#endif // Too early in initialization -- error log is lost
#endif
}
/*
......@@ -632,7 +612,6 @@ ia64_mca_rendez_int_handler(int rendez_irq, void *arg, struct pt_regs *ptregs)
int cpu = 0;
/* Mask all interrupts */
#warning XXX fix me: this used to be: save_and_cli(flags);
local_irq_save(flags);
#ifdef CONFIG_SMP
......@@ -709,8 +688,8 @@ ia64_return_to_sal_check(void)
ia64_os_to_sal_handoff_state.imots_context = IA64_MCA_SAME_CONTEXT;
/* Register pointer to new min state values */
/* NOTE: need to do something with this during recovery phase */
ia64_os_to_sal_handoff_state.imots_new_min_state = &ia64_mca_min_state_save_info;
ia64_os_to_sal_handoff_state.imots_new_min_state =
ia64_mca_min_state_save_info;
}
/*
......@@ -735,7 +714,7 @@ ia64_mca_ucmc_handler(void)
int platform_err = 0;
/* Get the MCA error record and log it */
platform_err = ia64_mca_log_sal_error_record(SAL_INFO_TYPE_MCA);
platform_err = ia64_mca_log_sal_error_record(SAL_INFO_TYPE_MCA, 0);
/*
* Do Platform-specific mca error handling if required.
......@@ -775,7 +754,7 @@ ia64_mca_cmc_int_handler(int cmc_irq, void *arg, struct pt_regs *ptregs)
cmc_irq, smp_processor_id());
/* Get the CMC error record and log it */
ia64_mca_log_sal_error_record(SAL_INFO_TYPE_CMC);
ia64_mca_log_sal_error_record(SAL_INFO_TYPE_CMC, 0);
}
/*
......@@ -845,8 +824,7 @@ ia64_init_handler (struct pt_regs *regs)
plog_ptr=(ia64_err_rec_t *)IA64_LOG_CURR_BUFFER(SAL_INFO_TYPE_INIT);
proc_ptr = &plog_ptr->proc_err;
ia64_process_min_state_save(&proc_ptr->processor_static_info.min_state_area,
regs);
ia64_process_min_state_save(&proc_ptr->processor_static_info.min_state_area);
/* Clear the INIT SAL logs now that they have been saved in the OS buffer */
ia64_sal_clear_state_info(SAL_INFO_TYPE_INIT);
......@@ -1677,6 +1655,9 @@ ia64_log_proc_dev_err_info_print (sal_log_processor_info_t *slpi,
if (slpi->valid.psi_static_struct) {
spsi = (sal_processor_static_info_t *)p_data;
/* copy interrupted context PAL min-state info */
ia64_process_min_state_save(&spsi->min_state_area);
/* Print branch register contents if valid */
if (spsi->valid.br)
ia64_log_processor_regs_print(spsi->br, 8, "Branch", "br",
......
......@@ -206,8 +206,20 @@ smp_send_reschedule_all (void)
void
smp_flush_tlb_all (void)
{
smp_call_function((void (*)(void *))__flush_tlb_all, 0, 1, 1);
__flush_tlb_all();
smp_call_function((void (*)(void *))local_flush_tlb_all, 0, 1, 1);
local_flush_tlb_all();
}
void
smp_flush_tlb_mm (struct mm_struct *mm)
{
local_flush_tlb_mm(mm);
/* this happens for the common case of a single-threaded fork(): */
if (likely(mm == current->active_mm && atomic_read(&mm->mm_users) == 1))
return;
smp_call_function((void (*)(void *))local_flush_tlb_mm, mm, 1, 1);
}
/*
......
......@@ -317,6 +317,29 @@ sys_free_hugepages (unsigned long addr)
#endif /* !CONFIG_HUGETLB_PAGE */
asmlinkage unsigned long
ia64_mremap (unsigned long addr, unsigned long old_len, unsigned long new_len, unsigned long flags,
unsigned long new_addr)
{
extern unsigned long do_mremap (unsigned long addr,
unsigned long old_len,
unsigned long new_len,
unsigned long flags,
unsigned long new_addr);
down_write(&current->mm->mmap_sem);
{
addr = do_mremap(addr, old_len, new_len, flags, new_addr);
}
up_write(&current->mm->mmap_sem);
if (IS_ERR((void *) addr))
return addr;
force_successful_syscall_return();
return addr;
}
asmlinkage long
sys_vm86 (long arg0, long arg1, long arg2, long arg3)
{
......
......@@ -84,7 +84,7 @@ wrap_mmu_context (struct mm_struct *mm)
for (i = 0; i < NR_CPUS; ++i)
if (i != smp_processor_id())
per_cpu(ia64_need_tlb_flush, i) = 1;
__flush_tlb_all();
local_flush_tlb_all();
}
void
......@@ -108,7 +108,7 @@ ia64_global_tlb_purge (unsigned long start, unsigned long end, unsigned long nbi
}
void
__flush_tlb_all (void)
local_flush_tlb_all (void)
{
unsigned long i, j, flags, count0, count1, stride0, stride1, addr;
......@@ -194,5 +194,5 @@ ia64_tlb_init (void)
local_cpu_data->ptce_stride[0] = ptce_info.stride[0];
local_cpu_data->ptce_stride[1] = ptce_info.stride[1];
__flush_tlb_all(); /* nuke left overs from bootstrapping... */
local_flush_tlb_all(); /* nuke left overs from bootstrapping... */
}
......@@ -44,10 +44,6 @@
#define DBG(x...)
#endif
#ifdef CONFIG_IA64_MCA
extern void ia64_mca_check_errors( void );
#endif
struct pci_fixup pcibios_fixups[1];
/*
......
This diff is collapsed.
This diff is collapsed.
#
# Automatically generated make config: don't edit
#
#
# Code maturity level options
#
# CONFIG_EXPERIMENTAL is not set
#
# Loadable module support
#
# CONFIG_MODULES is not set
#
# General setup
#
CONFIG_IA64=y
# CONFIG_ISA is not set
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SBUS is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_ACPI=y
CONFIG_ACPI_EFI=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_KERNEL_CONFIG=y
CONFIG_ITANIUM=y
# CONFIG_MCKINLEY is not set
# CONFIG_IA64_GENERIC is not set
CONFIG_IA64_DIG=y
# CONFIG_IA64_HP_SIM is not set
# CONFIG_IA64_SGI_SN1 is not set
# CONFIG_IA64_SGI_SN2 is not set
# CONFIG_IA64_PAGE_SIZE_4KB is not set
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
CONFIG_IA64_BRL_EMU=y
CONFIG_ITANIUM_BSTEP_SPECIFIC=y
CONFIG_IA64_L1_CACHE_SHIFT=6
# CONFIG_NUMA is not set
# CONFIG_IA64_MCA is not set
CONFIG_PM=y
CONFIG_IA64_HAVE_SYNCRONIZED_ITC=y
# CONFIG_DEVFS_FS is not set
CONFIG_KCORE_ELF=y
CONFIG_SMP=y
# CONFIG_IA32_SUPPORT is not set
# CONFIG_PERFMON is not set
# CONFIG_IA64_PALINFO is not set
# CONFIG_EFI_VARS is not set
# CONFIG_NET is not set
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_SYSCTL is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_BUSMGR is not set
# CONFIG_ACPI_SYS is not set
# CONFIG_ACPI_CPU is not set
# CONFIG_ACPI_BUTTON is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_EC is not set
# CONFIG_ACPI_CMBATT is not set
# CONFIG_ACPI_THERMAL is not set
CONFIG_PCI=y
# CONFIG_PCI_NAMES is not set
# CONFIG_HOTPLUG is not set
# CONFIG_PCMCIA is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Plug and Play configuration
#
# CONFIG_PNP is not set
# CONFIG_ISAPNP is not set
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
#
# I2O device support
#
# CONFIG_I2O is not set
# CONFIG_I2O_PCI is not set
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_BLK_DEV_LVM is not set
#
# ATA/IDE/MFM/RLL support
#
CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDECS is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_ISAPNP is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_IDE_CHIPSETS is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_IDE_MODES is not set
# CONFIG_BLK_DEV_ATARAID is not set
# CONFIG_BLK_DEV_ATARAID_PDC is not set
# CONFIG_BLK_DEV_ATARAID_HPT is not set
#
# Alternate 1394 support
#
# CONFIG_X1394 is not set
#
# Alternate SCSI support
#
# CONFIG_XSCSI is not set
#
# SCSI support
#
# CONFIG_SCSI is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# CD-ROM drivers (not for SCSI or IDE/ATAPI drives)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Input core support
#
# CONFIG_INPUT is not set
# CONFIG_INPUT_KEYBDEV is not set
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
# CONFIG_SERIAL is not set
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# I2C support
#
# CONFIG_I2C is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_MOUSE is not set
#
# Joysticks
#
# CONFIG_INPUT_GAMEPORT is not set
#
# Input core support is needed for gameports
#
#
# Input core support is needed for joysticks
#
# CONFIG_QIC02_TAPE is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_INTEL_RNG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_EFI_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_REISERFS_CHECK is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_FAT_FS is not set
# CONFIG_MSDOS_FS is not set
# CONFIG_UMSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
CONFIG_TMPFS=y
# CONFIG_RAMFS is not set
# CONFIG_ISO9660_FS is not set
# CONFIG_JOLIET is not set
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_XFS_SUPPORT is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_SMB_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_SMB_NLS is not set
# CONFIG_NLS is not set
#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
#
# Frame-buffer support
#
# CONFIG_FB is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
# CONFIG_USB is not set
#
# USB Controllers
#
# CONFIG_USB_UHCI is not set
# CONFIG_USB_UHCI_ALT is not set
# CONFIG_USB_OHCI is not set
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH is not set
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# USB Human Interface Devices (HID)
#
#
# Input core support is needed for USB HID
#
#
# USB Imaging devices
#
# CONFIG_USB_DC2XX is not set
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network adaptors
#
#
# Networking support is needed for USB Networking device support
#
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_RIO500 is not set
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_IA64_PRINT_HAZARDS=y
# CONFIG_DISABLE_VHPT is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_IA64_EARLY_PRINTK=y
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_IA64_DEBUG_CMPXCHG is not set
# CONFIG_IA64_DEBUG_IRQ is not set
# CONFIG_KDB is not set
# CONFIG_KDB_MODULES is not set
# CONFIG_KALLSYMS is not set
#
# Automatically generated make config: don't edit
#
#
# Code maturity level options
#
# CONFIG_EXPERIMENTAL is not set
#
# Loadable module support
#
# CONFIG_MODULES is not set
#
# General setup
#
CONFIG_IA64=y
# CONFIG_ISA is not set
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SBUS is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_ACPI=y
CONFIG_ACPI_EFI=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_KERNEL_CONFIG=y
CONFIG_ITANIUM=y
# CONFIG_MCKINLEY is not set
# CONFIG_IA64_GENERIC is not set
CONFIG_IA64_DIG=y
# CONFIG_IA64_HP_SIM is not set
# CONFIG_IA64_SGI_SN1 is not set
# CONFIG_IA64_SGI_SN2 is not set
# CONFIG_IA64_PAGE_SIZE_4KB is not set
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
CONFIG_IA64_BRL_EMU=y
CONFIG_ITANIUM_BSTEP_SPECIFIC=y
CONFIG_IA64_L1_CACHE_SHIFT=6
# CONFIG_NUMA is not set
# CONFIG_IA64_MCA is not set
CONFIG_PM=y
CONFIG_IA64_HAVE_SYNCRONIZED_ITC=y
# CONFIG_DEVFS_FS is not set
CONFIG_KCORE_ELF=y
# CONFIG_SMP is not set
# CONFIG_IA32_SUPPORT is not set
# CONFIG_PERFMON is not set
# CONFIG_IA64_PALINFO is not set
# CONFIG_EFI_VARS is not set
# CONFIG_NET is not set
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_SYSCTL is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_BUSMGR is not set
# CONFIG_ACPI_SYS is not set
# CONFIG_ACPI_CPU is not set
# CONFIG_ACPI_BUTTON is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_EC is not set
# CONFIG_ACPI_CMBATT is not set
# CONFIG_ACPI_THERMAL is not set
CONFIG_PCI=y
# CONFIG_PCI_NAMES is not set
# CONFIG_HOTPLUG is not set
# CONFIG_PCMCIA is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Plug and Play configuration
#
# CONFIG_PNP is not set
# CONFIG_ISAPNP is not set
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
#
# I2O device support
#
# CONFIG_I2O is not set
# CONFIG_I2O_PCI is not set
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_BLK_DEV_LVM is not set
#
# ATA/IDE/MFM/RLL support
#
CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDECS is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_ISAPNP is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_IDE_CHIPSETS is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_IDE_MODES is not set
# CONFIG_BLK_DEV_ATARAID is not set
# CONFIG_BLK_DEV_ATARAID_PDC is not set
# CONFIG_BLK_DEV_ATARAID_HPT is not set
#
# Alternate 1394 support
#
# CONFIG_X1394 is not set
#
# Alternate SCSI support
#
# CONFIG_XSCSI is not set
#
# SCSI support
#
# CONFIG_SCSI is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# CD-ROM drivers (not for SCSI or IDE/ATAPI drives)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Input core support
#
# CONFIG_INPUT is not set
# CONFIG_INPUT_KEYBDEV is not set
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
# CONFIG_SERIAL is not set
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# I2C support
#
# CONFIG_I2C is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_MOUSE is not set
#
# Joysticks
#
# CONFIG_INPUT_GAMEPORT is not set
#
# Input core support is needed for gameports
#
#
# Input core support is needed for joysticks
#
# CONFIG_QIC02_TAPE is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_INTEL_RNG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_EFI_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_REISERFS_CHECK is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_FAT_FS is not set
# CONFIG_MSDOS_FS is not set
# CONFIG_UMSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
CONFIG_TMPFS=y
# CONFIG_RAMFS is not set
# CONFIG_ISO9660_FS is not set
# CONFIG_JOLIET is not set
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_XFS_SUPPORT is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_SMB_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_SMB_NLS is not set
# CONFIG_NLS is not set
#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
#
# Frame-buffer support
#
# CONFIG_FB is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
# CONFIG_USB is not set
#
# USB Controllers
#
# CONFIG_USB_UHCI is not set
# CONFIG_USB_UHCI_ALT is not set
# CONFIG_USB_OHCI is not set
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH is not set
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# USB Human Interface Devices (HID)
#
#
# Input core support is needed for USB HID
#
#
# USB Imaging devices
#
# CONFIG_USB_DC2XX is not set
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network adaptors
#
#
# Networking support is needed for USB Networking device support
#
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_RIO500 is not set
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_IA64_PRINT_HAZARDS=y
# CONFIG_DISABLE_VHPT is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_IA64_EARLY_PRINTK=y
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_IA64_DEBUG_CMPXCHG is not set
# CONFIG_IA64_DEBUG_IRQ is not set
# CONFIG_KDB is not set
# CONFIG_KDB_MODULES is not set
# CONFIG_KALLSYMS is not set
#
# Automatically generated make config: don't edit
#
#
# Code maturity level options
#
# CONFIG_EXPERIMENTAL is not set
#
# Loadable module support
#
# CONFIG_MODULES is not set
#
# General setup
#
CONFIG_IA64=y
# CONFIG_ISA is not set
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SBUS is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_ACPI=y
CONFIG_ACPI_EFI=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_KERNEL_CONFIG=y
CONFIG_ITANIUM=y
# CONFIG_MCKINLEY is not set
CONFIG_IA64_GENERIC=y
# CONFIG_IA64_DIG is not set
# CONFIG_IA64_HP_SIM is not set
# CONFIG_IA64_SGI_SN1 is not set
# CONFIG_IA64_SGI_SN2 is not set
# CONFIG_IA64_PAGE_SIZE_4KB is not set
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
CONFIG_IA64_BRL_EMU=y
CONFIG_ITANIUM_BSTEP_SPECIFIC=y
CONFIG_IA64_L1_CACHE_SHIFT=6
CONFIG_KCORE_ELF=y
CONFIG_SMP=y
# CONFIG_IA32_SUPPORT is not set
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
# CONFIG_EFI_VARS is not set
# CONFIG_NET is not set
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_SYSCTL is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_BUSMGR is not set
# CONFIG_ACPI_SYS is not set
# CONFIG_ACPI_CPU is not set
# CONFIG_ACPI_BUTTON is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_EC is not set
# CONFIG_ACPI_CMBATT is not set
# CONFIG_ACPI_THERMAL is not set
CONFIG_PCI=y
# CONFIG_PCI_NAMES is not set
# CONFIG_HOTPLUG is not set
# CONFIG_PCMCIA is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Plug and Play configuration
#
# CONFIG_PNP is not set
# CONFIG_ISAPNP is not set
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
#
# I2O device support
#
# CONFIG_I2O is not set
# CONFIG_I2O_PCI is not set
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_BLK_DEV_LVM is not set
#
# ATA/IDE/MFM/RLL support
#
CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDECS is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_ISAPNP is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_IDE_CHIPSETS is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_IDE_MODES is not set
# CONFIG_BLK_DEV_ATARAID is not set
# CONFIG_BLK_DEV_ATARAID_PDC is not set
# CONFIG_BLK_DEV_ATARAID_HPT is not set
#
# Alternate 1394 support
#
# CONFIG_X1394 is not set
#
# Alternate SCSI support
#
# CONFIG_XSCSI is not set
#
# SCSI support
#
# CONFIG_SCSI is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# CD-ROM drivers (not for SCSI or IDE/ATAPI drives)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Input core support
#
# CONFIG_INPUT is not set
# CONFIG_INPUT_KEYBDEV is not set
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
# CONFIG_SERIAL is not set
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# I2C support
#
# CONFIG_I2C is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_MOUSE is not set
#
# Joysticks
#
# CONFIG_INPUT_GAMEPORT is not set
#
# Input core support is needed for gameports
#
#
# Input core support is needed for joysticks
#
# CONFIG_QIC02_TAPE is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_INTEL_RNG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_EFI_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_REISERFS_CHECK is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_FAT_FS is not set
# CONFIG_MSDOS_FS is not set
# CONFIG_UMSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
CONFIG_TMPFS=y
# CONFIG_RAMFS is not set
# CONFIG_ISO9660_FS is not set
# CONFIG_JOLIET is not set
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_XFS_SUPPORT is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_SMB_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_SMB_NLS is not set
# CONFIG_NLS is not set
#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
#
# Frame-buffer support
#
# CONFIG_FB is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
# CONFIG_USB is not set
#
# USB Controllers
#
# CONFIG_USB_UHCI is not set
# CONFIG_USB_UHCI_ALT is not set
# CONFIG_USB_OHCI is not set
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH is not set
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# USB Human Interface Devices (HID)
#
#
# Input core support is needed for USB HID
#
#
# USB Imaging devices
#
# CONFIG_USB_DC2XX is not set
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network adaptors
#
#
# Networking support is needed for USB Networking device support
#
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_RIO500 is not set
#
# Simulated drivers
#
# CONFIG_SIMETH is not set
# CONFIG_SIM_SERIAL is not set
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_IA64_PRINT_HAZARDS=y
# CONFIG_DISABLE_VHPT is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_IA64_EARLY_PRINTK=y
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_IA64_DEBUG_CMPXCHG is not set
# CONFIG_IA64_DEBUG_IRQ is not set
# CONFIG_KDB is not set
# CONFIG_KDB_MODULES is not set
# CONFIG_KALLSYMS is not set
#
# Automatically generated make config: don't edit
#
#
# Code maturity level options
#
# CONFIG_EXPERIMENTAL is not set
#
# Loadable module support
#
# CONFIG_MODULES is not set
#
# General setup
#
CONFIG_IA64=y
# CONFIG_ISA is not set
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SBUS is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_ACPI=y
CONFIG_ACPI_EFI=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_KERNEL_CONFIG=y
CONFIG_ITANIUM=y
# CONFIG_MCKINLEY is not set
CONFIG_IA64_GENERIC=y
# CONFIG_IA64_DIG is not set
# CONFIG_IA64_HP_SIM is not set
# CONFIG_IA64_SGI_SN1 is not set
# CONFIG_IA64_SGI_SN2 is not set
# CONFIG_IA64_PAGE_SIZE_4KB is not set
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
CONFIG_IA64_BRL_EMU=y
CONFIG_ITANIUM_BSTEP_SPECIFIC=y
CONFIG_IA64_L1_CACHE_SHIFT=6
CONFIG_KCORE_ELF=y
# CONFIG_SMP is not set
# CONFIG_IA32_SUPPORT is not set
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
# CONFIG_EFI_VARS is not set
# CONFIG_NET is not set
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_SYSCTL is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_BUSMGR is not set
# CONFIG_ACPI_SYS is not set
# CONFIG_ACPI_CPU is not set
# CONFIG_ACPI_BUTTON is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_EC is not set
# CONFIG_ACPI_CMBATT is not set
# CONFIG_ACPI_THERMAL is not set
CONFIG_PCI=y
# CONFIG_PCI_NAMES is not set
# CONFIG_HOTPLUG is not set
# CONFIG_PCMCIA is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Plug and Play configuration
#
# CONFIG_PNP is not set
# CONFIG_ISAPNP is not set
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
#
# I2O device support
#
# CONFIG_I2O is not set
# CONFIG_I2O_PCI is not set
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_BLK_DEV_LVM is not set
#
# ATA/IDE/MFM/RLL support
#
CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDECS is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_ISAPNP is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_IDE_CHIPSETS is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_IDE_MODES is not set
# CONFIG_BLK_DEV_ATARAID is not set
# CONFIG_BLK_DEV_ATARAID_PDC is not set
# CONFIG_BLK_DEV_ATARAID_HPT is not set
#
# Alternate 1394 support
#
# CONFIG_X1394 is not set
#
# Alternate SCSI support
#
# CONFIG_XSCSI is not set
#
# SCSI support
#
# CONFIG_SCSI is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# CD-ROM drivers (not for SCSI or IDE/ATAPI drives)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Input core support
#
# CONFIG_INPUT is not set
# CONFIG_INPUT_KEYBDEV is not set
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
# CONFIG_SERIAL is not set
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# I2C support
#
# CONFIG_I2C is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_MOUSE is not set
#
# Joysticks
#
# CONFIG_INPUT_GAMEPORT is not set
#
# Input core support is needed for gameports
#
#
# Input core support is needed for joysticks
#
# CONFIG_QIC02_TAPE is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_INTEL_RNG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_EFI_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_REISERFS_CHECK is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_FAT_FS is not set
# CONFIG_MSDOS_FS is not set
# CONFIG_UMSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
CONFIG_TMPFS=y
# CONFIG_RAMFS is not set
# CONFIG_ISO9660_FS is not set
# CONFIG_JOLIET is not set
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_XFS_SUPPORT is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_SMB_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_SMB_NLS is not set
# CONFIG_NLS is not set
#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
#
# Frame-buffer support
#
# CONFIG_FB is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
# CONFIG_USB is not set
#
# USB Controllers
#
# CONFIG_USB_UHCI is not set
# CONFIG_USB_UHCI_ALT is not set
# CONFIG_USB_OHCI is not set
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH is not set
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# USB Human Interface Devices (HID)
#
#
# Input core support is needed for USB HID
#
#
# USB Imaging devices
#
# CONFIG_USB_DC2XX is not set
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network adaptors
#
#
# Networking support is needed for USB Networking device support
#
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_RIO500 is not set
#
# Simulated drivers
#
# CONFIG_SIMETH is not set
# CONFIG_SIM_SERIAL is not set
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_IA64_PRINT_HAZARDS=y
# CONFIG_DISABLE_VHPT is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_IA64_EARLY_PRINTK=y
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_IA64_DEBUG_CMPXCHG is not set
# CONFIG_IA64_DEBUG_IRQ is not set
# CONFIG_KDB is not set
# CONFIG_KDB_MODULES is not set
# CONFIG_KALLSYMS is not set
#
# Automatically generated make config: don't edit
#
#
# Code maturity level options
#
# CONFIG_EXPERIMENTAL is not set
#
# Loadable module support
#
# CONFIG_MODULES is not set
#
# General setup
#
CONFIG_IA64=y
# CONFIG_ISA is not set
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SBUS is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_ITANIUM=y
# CONFIG_MCKINLEY is not set
# CONFIG_IA64_GENERIC is not set
# CONFIG_IA64_DIG is not set
CONFIG_IA64_HP_SIM=y
# CONFIG_IA64_SGI_SN1 is not set
# CONFIG_IA64_SGI_SN2 is not set
# CONFIG_IA64_PAGE_SIZE_4KB is not set
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
CONFIG_IA64_BRL_EMU=y
CONFIG_ITANIUM_BSTEP_SPECIFIC=y
CONFIG_IA64_L1_CACHE_SHIFT=6
CONFIG_KCORE_ELF=y
# CONFIG_SMP is not set
# CONFIG_IA32_SUPPORT is not set
# CONFIG_PERFMON is not set
# CONFIG_IA64_PALINFO is not set
# CONFIG_EFI_VARS is not set
CONFIG_NET=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
#
# Networking options
#
# CONFIG_PACKET is not set
# CONFIG_NETLINK is not set
# CONFIG_NETFILTER is not set
# CONFIG_FILTER is not set
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
#
#
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Alternate 1394 support
#
# CONFIG_X1394 is not set
#
# Alternate SCSI support
#
# CONFIG_XSCSI is not set
#
# SCSI support
#
CONFIG_SCSI=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_SD_EXTRA_DEVS=40
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_DEBUG_QUEUES is not set
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
#
# SCSI low-level drivers
#
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
#
# Input core support
#
# CONFIG_INPUT is not set
# CONFIG_INPUT_KEYBDEV is not set
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
# CONFIG_SERIAL is not set
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_MOUSE is not set
#
# Joysticks
#
# CONFIG_INPUT_GAMEPORT is not set
#
# Input core support is needed for gameports
#
#
# Input core support is needed for joysticks
#
# CONFIG_QIC02_TAPE is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_INTEL_RNG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
CONFIG_EFI_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_REISERFS_CHECK is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_FAT_FS is not set
# CONFIG_MSDOS_FS is not set
# CONFIG_UMSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
CONFIG_TMPFS=y
# CONFIG_RAMFS is not set
# CONFIG_ISO9660_FS is not set
# CONFIG_JOLIET is not set
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_XFS_SUPPORT is not set
#
# Network File Systems
#
# CONFIG_CODA_FS is not set
# CONFIG_NFS_FS is not set
# CONFIG_NFS_V3 is not set
# CONFIG_ROOT_NFS is not set
# CONFIG_NFSD is not set
# CONFIG_NFSD_V3 is not set
# CONFIG_SUNRPC is not set
# CONFIG_LOCKD is not set
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_SMB_NLS is not set
# CONFIG_NLS is not set
#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
#
# Frame-buffer support
#
# CONFIG_FB is not set
#
# Simulated drivers
#
CONFIG_SIMETH=y
CONFIG_SIM_SERIAL=y
CONFIG_SCSI_SIM=y
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_IA64_PRINT_HAZARDS=y
# CONFIG_DISABLE_VHPT is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_IA64_EARLY_PRINTK=y
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_IA64_DEBUG_CMPXCHG is not set
# CONFIG_IA64_DEBUG_IRQ is not set
# CONFIG_KDB is not set
# CONFIG_KDB_MODULES is not set
# CONFIG_KALLSYMS is not set
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
......@@ -56,7 +56,7 @@
#define ACPI_ACQUIRE_GLOBAL_LOCK(GLptr, Acq) \
do { \
__asm__ volatile ("1: ld4 r29=%1\n" \
__asm__ volatile ("1: ld4 r29=[%1]\n" \
";;\n" \
"mov ar.ccv=r29\n" \
"mov r2=r29\n" \
......@@ -68,7 +68,7 @@
";;\n" \
"add r29=r29,r30\n" \
";;\n" \
"cmpxchg4.acq r30=%1,r29,ar.ccv\n" \
"cmpxchg4.acq r30=[%1],r29,ar.ccv\n" \
";;\n" \
"cmp.eq p6,p7=r2,r30\n" \
"(p7) br.dpnt.few 1b\n" \
......@@ -76,24 +76,24 @@
";;\n" \
"(p8) mov %0=-1\n" \
"(p9) mov %0=r0\n" \
:"=r"(Acq):"m"(GLptr):"r2","r29","r30","memory"); \
:"=r"(Acq):"r"(GLptr):"r2","r29","r30","memory"); \
} while (0)
#define ACPI_RELEASE_GLOBAL_LOCK(GLptr, Acq) \
do { \
__asm__ volatile ("1: ld4 r29=%1\n" \
__asm__ volatile ("1: ld4 r29=[%1]\n" \
";;\n" \
"mov ar.ccv=r29\n" \
"mov r2=r29\n" \
"and r29=-4,r29\n" \
";;\n" \
"cmpxchg4.acq r30=%1,r29,ar.ccv\n" \
"cmpxchg4.acq r30=[%1],r29,ar.ccv\n" \
";;\n" \
"cmp.eq p6,p7=r2,r30\n" \
"(p7) br.dpnt.few 1b\n" \
"and %0=1,r2\n" \
";;\n" \
:"=r"(Acq):"m"(GLptr):"r2","r29","r30","memory"); \
:"=r"(Acq):"r"(GLptr):"r2","r29","r30","memory"); \
} while (0)
const char *acpi_get_sysname (void);
......
This diff is collapsed.
......@@ -103,6 +103,8 @@ enum {
IA64_MCA_NEW_CONTEXT = -1 /* SAL to return to new context */
};
#define MIN_STATE_AREA_SIZE 57
typedef struct ia64_mca_os_to_sal_state_s {
u64 imots_os_status; /* OS status to SAL as to what happened
* with the MCA handling.
......@@ -133,7 +135,7 @@ extern void ia64_mca_cmc_int_handler(int,void *,struct pt_regs *);
extern void ia64_mca_cpe_int_handler(int,void *,struct pt_regs *);
extern int ia64_log_print(int,prfunc_t);
extern void ia64_mca_cmc_vector_setup(void);
extern void ia64_mca_check_errors( void );
extern int ia64_mca_check_errors(void);
extern u64 ia64_log_get(int, prfunc_t);
#define PLATFORM_CALL(fn, args) printk("Platform call TBD\n")
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment