Merge tiger.hpl.hp.com:/data1/bk/vanilla/linux-2.5

into tiger.hpl.hp.com:/data1/bk/lia64/to-linus-2.5

arch/ia64/boot/bootloader.c

@@ -53,6 +53,15 @@ struct disk_stat {
 
 #include "../kernel/fw-emu.c"
 
+/*
+ * Set a break point on this function so that symbols are available to set breakpoints in
+ * the kernel being debugged.
+ */
+static void
+debug_break (void)
+{
+}
+
 static void
 cons_write (const char *buf)
 {
@@ -187,6 +196,7 @@ _start (void)
 
 	ssc(0, (long) kpath, 0, 0, SSC_LOAD_SYMBOLS);
 
+	debug_break();
 	asm volatile ("mov sp=%2; mov r28=%1; br.sptk.few %0"
 		      :: "b"(e_entry), "r"(bp), "r"(__pa(&stack)));
 

arch/ia64/ia32/binfmt_elf32.c

@@ -162,9 +162,11 @@ ia32_setup_arg_pages (struct linux_binprm *bprm)
 {
 	unsigned long stack_base;
 	struct vm_area_struct *mpnt;
+	struct mm_struct *mm = current->mm;
 	int i;
 
 	stack_base = IA32_STACK_TOP - MAX_ARG_PAGES*PAGE_SIZE;
+	mm->arg_start = bprm->p + stack_base;
 
 	bprm->p += stack_base;
 	if (bprm->loader)
@@ -175,6 +177,11 @@ ia32_setup_arg_pages (struct linux_binprm *bprm)
 	if (!mpnt)
 		return -ENOMEM;
 
+	if (!vm_enough_memory((IA32_STACK_TOP - (PAGE_MASK & (unsigned long) bprm->p))>>PAGE_SHIFT)) {
+		kmem_cache_free(vm_area_cachep, mpnt);
+		return -ENOMEM;
+	}
+
 	down_write(&current->mm->mmap_sem);
 	{
 		mpnt->vm_mm = current->mm;

arch/ia64/ia32/ia32_entry.S

@@ -196,7 +196,7 @@ ia32_syscall_table:
 	data8 sys32_fork
 	data8 sys_read
 	data8 sys_write
-	data8 sys_open		  /* 5 */
+	data8 sys32_open	  /* 5 */
 	data8 sys_close
 	data8 sys32_waitpid
 	data8 sys_creat

arch/ia64/ia32/ia32_signal.c

@@ -165,10 +165,10 @@ copy_siginfo_to_user32 (siginfo_t32 *to, siginfo_t *from)
  *    sw         ar.fsr(0:15)
  *    tag        ar.fsr(16:31)               with odd numbered bits not used
  *                                           (read returns 0, writes ignored)
- *    ipoff      ar.fir(0:31)   RO
- *    cssel      ar.fir(32:47)  RO
- *    dataoff    ar.fdr(0:31)   RO
- *    datasel    ar.fdr(32:47)  RO
+ *    ipoff      ar.fir(0:31)
+ *    cssel      ar.fir(32:47)
+ *    dataoff    ar.fdr(0:31)
+ *    datasel    ar.fdr(32:47)
  *
  *    _st[(0+TOS)%8]   f8
  *    _st[(1+TOS)%8]   f9                    (f8, f9 from ptregs)
@@ -328,7 +328,7 @@ restore_ia32_fpstate_live (struct _fpstate_ia32 *save)
 	unsigned long num64, mxcsr;
 	struct _fpreg_ia32 *fpregp;
 	char buf[32];
-	unsigned long fsr, fcr;
+	unsigned long fsr, fcr, fir, fdr;
 	int fp_tos, fr8_st_map;
 
 	if (!access_ok(VERIFY_READ, save, sizeof(*save)))
@@ -345,6 +345,8 @@ restore_ia32_fpstate_live (struct _fpstate_ia32 *save)
 	 */
 	asm volatile ( "mov %0=ar.fsr;" : "=r"(fsr));
 	asm volatile ( "mov %0=ar.fcr;" : "=r"(fcr));
+	asm volatile ( "mov %0=ar.fir;" : "=r"(fir));
+	asm volatile ( "mov %0=ar.fdr;" : "=r"(fdr));
 
 	__get_user(mxcsr, (unsigned int *)&save->mxcsr);
 	/* setting bits 0..5 8..12 with cw and 39..47 from mxcsr */
@@ -355,14 +357,34 @@ restore_ia32_fpstate_live (struct _fpstate_ia32 *save)
 
 	/* setting bits 0..31 with sw and tag and 32..37 from mxcsr */
 	__get_user(lo, (unsigned int *)&save->sw);
+	/* set bits 15,7 (fsw.b, fsw.es) to reflect the current error status */
+	if ( !(lo & 0x7f) )
+		lo &= (~0x8080);
 	__get_user(hi, (unsigned int *)&save->tag);
 	num64 = mxcsr & 0x3f;
 	num64 = (num64 << 16) | (hi & 0xffff);
 	num64 = (num64 << 16) | (lo & 0xffff);
 	fsr = (fsr & (~0x3fffffffff)) | num64;
 
+	/* setting bits 0..47 with cssel and ipoff */
+	__get_user(lo, (unsigned int *)&save->ipoff);
+	__get_user(hi, (unsigned int *)&save->cssel);
+	num64 = hi & 0xffff;
+	num64 = (num64 << 32) | lo;
+	fir = (fir & (~0xffffffffffff)) | num64;
+
+	/* setting bits 0..47 with datasel and dataoff */
+	__get_user(lo, (unsigned int *)&save->dataoff);
+	__get_user(hi, (unsigned int *)&save->datasel);
+	num64 = hi & 0xffff;
+	num64 = (num64 << 32) | lo;
+	fdr = (fdr & (~0xffffffffffff)) | num64;
+
 	asm volatile ( "mov ar.fsr=%0;" :: "r"(fsr));
 	asm volatile ( "mov ar.fcr=%0;" :: "r"(fcr));
+	asm volatile ( "mov ar.fir=%0;" :: "r"(fir));
+	asm volatile ( "mov ar.fdr=%0;" :: "r"(fdr));
+
 	/*
 	 * restore f8, f9 onto pt_regs
 	 * restore f10..f15 onto live registers

arch/ia64/ia32/sys_ia32.c

@@ -2898,57 +2898,152 @@ get_fpreg (int regno, struct _fpreg_ia32 *reg, struct pt_regs *ptp, struct switc
 }
 
 static int
-save_ia32_fpstate (struct task_struct *tsk, struct _fpstate_ia32 *save)
+save_ia32_fpstate (struct task_struct *tsk, struct ia32_user_i387_struct *save)
 {
 	struct switch_stack *swp;
 	struct pt_regs *ptp;
 	int i, tos;
 
 	if (!access_ok(VERIFY_WRITE, save, sizeof(*save)))
-		return -EIO;
-	__put_user(tsk->thread.fcr, &save->cw);
-	__put_user(tsk->thread.fsr, &save->sw);
-	__put_user(tsk->thread.fsr >> 32, &save->tag);
-	__put_user(tsk->thread.fir, &save->ipoff);
-	__put_user(__USER_CS, &save->cssel);
-	__put_user(tsk->thread.fdr, &save->dataoff);
-	__put_user(__USER_DS, &save->datasel);
+		return -EFAULT;
+
+	__put_user(tsk->thread.fcr & 0xffff, &save->cwd);
+	__put_user(tsk->thread.fsr & 0xffff, &save->swd);
+	__put_user((tsk->thread.fsr>>16) & 0xffff, &save->twd);
+	__put_user(tsk->thread.fir, &save->fip);
+	__put_user((tsk->thread.fir>>32) & 0xffff, &save->fcs);
+	__put_user(tsk->thread.fdr, &save->foo);
+	__put_user((tsk->thread.fdr>>32) & 0xffff, &save->fos);
+
 	/*
 	 *  Stack frames start with 16-bytes of temp space
 	 */
 	swp = (struct switch_stack *)(tsk->thread.ksp + 16);
 	ptp = ia64_task_regs(tsk);
-	tos = (tsk->thread.fsr >> 11) & 3;
+	tos = (tsk->thread.fsr >> 11) & 7;
 	for (i = 0; i < 8; i++)
-		put_fpreg(i, &save->_st[i], ptp, swp, tos);
+		put_fpreg(i, (struct _fpreg_ia32 *)&save->st_space[4*i], ptp, swp, tos);
 	return 0;
 }
 
 static int
-restore_ia32_fpstate (struct task_struct *tsk, struct _fpstate_ia32 *save)
+restore_ia32_fpstate (struct task_struct *tsk, struct ia32_user_i387_struct *save)
 {
 	struct switch_stack *swp;
 	struct pt_regs *ptp;
-	int i, tos, ret;
-	int fsrlo, fsrhi;
+	int i, tos;
+	unsigned int fsrlo, fsrhi, num32;
 
 	if (!access_ok(VERIFY_READ, save, sizeof(*save)))
-		return(-EIO);
-	ret = __get_user(tsk->thread.fcr, (unsigned int *)&save->cw);
-	ret |= __get_user(fsrlo, (unsigned int *)&save->sw);
-	ret |= __get_user(fsrhi, (unsigned int *)&save->tag);
-	tsk->thread.fsr = ((long)fsrhi << 32) | (long)fsrlo;
-	ret |= __get_user(tsk->thread.fir, (unsigned int *)&save->ipoff);
-	ret |= __get_user(tsk->thread.fdr, (unsigned int *)&save->dataoff);
+		return(-EFAULT);
+
+	__get_user(num32, (unsigned int *)&save->cwd);
+	tsk->thread.fcr = (tsk->thread.fcr & (~0x1f3f)) | (num32 & 0x1f3f);
+	__get_user(fsrlo, (unsigned int *)&save->swd);
+	__get_user(fsrhi, (unsigned int *)&save->twd);
+	num32 = (fsrhi << 16) | fsrlo;
+	tsk->thread.fsr = (tsk->thread.fsr & (~0xffffffff)) | num32;
+	__get_user(num32, (unsigned int *)&save->fip);
+	tsk->thread.fir = (tsk->thread.fir & (~0xffffffff)) | num32;
+	__get_user(num32, (unsigned int *)&save->foo);
+	tsk->thread.fdr = (tsk->thread.fdr & (~0xffffffff)) | num32;
+
 	/*
 	 *  Stack frames start with 16-bytes of temp space
 	 */
 	swp = (struct switch_stack *)(tsk->thread.ksp + 16);
 	ptp = ia64_task_regs(tsk);
-	tos = (tsk->thread.fsr >> 11) & 3;
+	tos = (tsk->thread.fsr >> 11) & 7;
 	for (i = 0; i < 8; i++)
-		get_fpreg(i, &save->_st[i], ptp, swp, tos);
-	return ret ? -EFAULT : 0;
+		get_fpreg(i, (struct _fpreg_ia32 *)&save->st_space[4*i], ptp, swp, tos);
+	return 0;
+}
+
+static int
+save_ia32_fpxstate (struct task_struct *tsk, struct ia32_user_fxsr_struct *save)
+{
+	struct switch_stack *swp;
+	struct pt_regs *ptp;
+	int i, tos;
+	unsigned long mxcsr=0;
+	unsigned long num128[2];
+
+	if (!access_ok(VERIFY_WRITE, save, sizeof(*save)))
+		return -EFAULT;
+
+	__put_user(tsk->thread.fcr & 0xffff, &save->cwd);
+	__put_user(tsk->thread.fsr & 0xffff, &save->swd);
+	__put_user((tsk->thread.fsr>>16) & 0xffff, &save->twd);
+	__put_user(tsk->thread.fir, &save->fip);
+	__put_user((tsk->thread.fir>>32) & 0xffff, &save->fcs);
+	__put_user(tsk->thread.fdr, &save->foo);
+	__put_user((tsk->thread.fdr>>32) & 0xffff, &save->fos);
+
+        /*
+         *  Stack frames start with 16-bytes of temp space
+         */
+        swp = (struct switch_stack *)(tsk->thread.ksp + 16);
+        ptp = ia64_task_regs(tsk);
+	tos = (tsk->thread.fsr >> 11) & 7;
+        for (i = 0; i < 8; i++)
+		put_fpreg(i, (struct _fpxreg_ia32 *)&save->st_space[4*i], ptp, swp, tos);
+
+	mxcsr = ((tsk->thread.fcr>>32) & 0xff80) | ((tsk->thread.fsr>>32) & 0x3f);
+	__put_user(mxcsr & 0xffff, &save->mxcsr);
+	for (i = 0; i < 8; i++) {
+		memcpy(&(num128[0]), &(swp->f16) + i*2, sizeof(unsigned long));
+		memcpy(&(num128[1]), &(swp->f17) + i*2, sizeof(unsigned long));
+		copy_to_user(&save->xmm_space[0] + 4*i, num128, sizeof(struct _xmmreg_ia32));
+	}
+	return 0;
+}
+
+static int
+restore_ia32_fpxstate (struct task_struct *tsk, struct ia32_user_fxsr_struct *save)
+{
+	struct switch_stack *swp;
+	struct pt_regs *ptp;
+	int i, tos;
+	unsigned int fsrlo, fsrhi, num32;
+	int mxcsr;
+	unsigned long num64;
+	unsigned long num128[2];
+
+	if (!access_ok(VERIFY_READ, save, sizeof(*save)))
+		return(-EFAULT);
+
+	__get_user(num32, (unsigned int *)&save->cwd);
+	tsk->thread.fcr = (tsk->thread.fcr & (~0x1f3f)) | (num32 & 0x1f3f);
+	__get_user(fsrlo, (unsigned int *)&save->swd);
+	__get_user(fsrhi, (unsigned int *)&save->twd);
+	num32 = (fsrhi << 16) | fsrlo;
+	tsk->thread.fsr = (tsk->thread.fsr & (~0xffffffff)) | num32;
+	__get_user(num32, (unsigned int *)&save->fip);
+	tsk->thread.fir = (tsk->thread.fir & (~0xffffffff)) | num32;
+	__get_user(num32, (unsigned int *)&save->foo);
+	tsk->thread.fdr = (tsk->thread.fdr & (~0xffffffff)) | num32;
+
+	/*
+	 *  Stack frames start with 16-bytes of temp space
+	 */
+	swp = (struct switch_stack *)(tsk->thread.ksp + 16);
+	ptp = ia64_task_regs(tsk);
+	tos = (tsk->thread.fsr >> 11) & 7;
+	for (i = 0; i < 8; i++)
+	get_fpreg(i, (struct _fpxreg_ia32 *)&save->st_space[4*i], ptp, swp, tos);
+
+	__get_user(mxcsr, (unsigned int *)&save->mxcsr);
+	num64 = mxcsr & 0xff10;
+	tsk->thread.fcr = (tsk->thread.fcr & (~0xff1000000000)) | (num64<<32);
+	num64 = mxcsr & 0x3f;
+	tsk->thread.fsr = (tsk->thread.fsr & (~0x3f00000000)) | (num64<<32);
+
+	for (i = 0; i < 8; i++) {
+		copy_from_user(num128, &save->xmm_space[0] + 4*i, sizeof(struct _xmmreg_ia32));
+		memcpy(&(swp->f16) + i*2, &(num128[0]), sizeof(unsigned long));
+		memcpy(&(swp->f17) + i*2, &(num128[1]), sizeof(unsigned long));
+	}
+	return 0;
 }
 
 extern asmlinkage long sys_ptrace (long, pid_t, unsigned long, unsigned long, long, long, long,
@@ -3060,11 +3155,19 @@ sys32_ptrace (int request, pid_t pid, unsigned int addr, unsigned int data,
 		break;
 
 	      case IA32_PTRACE_GETFPREGS:
-		ret = save_ia32_fpstate(child, (struct _fpstate_ia32 *) A(data));
+		ret = save_ia32_fpstate(child, (struct ia32_user_i387_struct *) A(data));
+		break;
+
+	      case IA32_PTRACE_GETFPXREGS:
+		ret = save_ia32_fpxstate(child, (struct ia32_user_fxsr_struct *) A(data));
 		break;
 
 	      case IA32_PTRACE_SETFPREGS:
-		ret = restore_ia32_fpstate(child, (struct _fpstate_ia32 *) A(data));
+		ret = restore_ia32_fpstate(child, (struct ia32_user_i387_struct *) A(data));
+		break;
+
+	      case IA32_PTRACE_SETFPXREGS:
+		ret = restore_ia32_fpxstate(child, (struct ia32_user_fxsr_struct *) A(data));
 		break;
 
 	      case PTRACE_SYSCALL:	/* continue, stop after next syscall */
@@ -3700,6 +3803,37 @@ sys32_brk (unsigned int brk)
 	return ret;
 }
 
+/*
+ * Exactly like fs/open.c:sys_open(), except that it doesn't set the O_LARGEFILE flag.
+ */
+asmlinkage long
+sys32_open (const char * filename, int flags, int mode)
+{
+	char * tmp;
+	int fd, error;
+
+	tmp = getname(filename);
+	fd = PTR_ERR(tmp);
+	if (!IS_ERR(tmp)) {
+		fd = get_unused_fd();
+		if (fd >= 0) {
+			struct file *f = filp_open(tmp, flags, mode);
+			error = PTR_ERR(f);
+			if (IS_ERR(f))
+				goto out_error;
+			fd_install(fd, f);
+		}
+out:
+		putname(tmp);
+	}
+	return fd;
+
+out_error:
+	put_unused_fd(fd);
+	fd = error;
+	goto out;
+}
+
 #ifdef	NOTYET  /* UNTESTED FOR IA64 FROM HERE DOWN */
 
 struct ncp_mount_data32 {

arch/ia64/kernel/efi.c

@@ -306,7 +306,7 @@ efi_memmap_walk (efi_freemem_callback_t callback, void *arg)
 		u64 start;
 		u64 end;
 	} prev, curr;
-	void *efi_map_start, *efi_map_end, *p, *q;
+	void *efi_map_start, *efi_map_end, *p, *q, *r;
 	efi_memory_desc_t *md, *check_md;
 	u64 efi_desc_size, start, end, granule_addr, first_non_wb_addr = 0;
 
@@ -351,11 +351,10 @@ efi_memmap_walk (efi_freemem_callback_t callback, void *arg)
 
 			if (!(first_non_wb_addr > granule_addr))
 				continue;	/* couldn't find enough contiguous memory */
-		}
-
-		/* BUG_ON((md->phys_addr >> IA64_GRANULE_SHIFT) < first_non_wb_addr); */
 
-		trim_top(md, first_non_wb_addr);
+			for (r = p; r < q; r += efi_desc_size)
+				trim_top(r, first_non_wb_addr);
+		}
 
 		if (is_available_memory(md)) {
 			if (md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT) > mem_limit) {

arch/ia64/kernel/entry.S

@@ -1160,7 +1160,7 @@ sys_call_table:
 	data8 sys_mlock
 	data8 sys_mlockall
 	data8 sys_mprotect			// 1155
-	data8 sys_mremap
+	data8 ia64_mremap
 	data8 sys_msync
 	data8 sys_munlock
 	data8 sys_munlockall

arch/ia64/kernel/fw-emu.c

@@ -20,7 +20,13 @@
 
 #define MB	(1024*1024UL)
 
-#define NUM_MEM_DESCS	3
+#define SIMPLE_MEMMAP	1
+
+#if SIMPLE_MEMMAP
+# define NUM_MEM_DESCS	4
+#else
+# define NUM_MEM_DESCS	16
+#endif
 
 static char fw_mem[(  sizeof(struct ia64_boot_param)
 		    + sizeof(efi_system_table_t)
@@ -379,6 +385,17 @@ sys_fw_init (const char *args, int arglen)
 	struct ia64_boot_param *bp;
 	unsigned char checksum = 0;
 	char *cp, *cmd_line;
+	int i = 0;
+#	define MAKE_MD(typ, attr, start, end)		\
+	do {						\
+		md = efi_memmap + i++;			\
+		md->type = typ;				\
+		md->pad = 0;				\
+		md->phys_addr = start;			\
+		md->virt_addr = 0;			\
+		md->num_pages = (end - start) >> 12;	\
+		md->attribute = attr;			\
+	} while (0)
 
 	memset(fw_mem, 0, sizeof(fw_mem));
 
@@ -464,47 +481,29 @@ sys_fw_init (const char *args, int arglen)
 
 	sal_systab->checksum = -checksum;
 
+#if SIMPLE_MEMMAP
 	/* simulate free memory at physical address zero */
-	md = &efi_memmap[0];
-	md->type = EFI_BOOT_SERVICES_DATA;
-	md->pad = 0;
-	md->phys_addr = 0*MB;
-	md->virt_addr = 0;
-	md->num_pages = (1*MB) >> 12;	/* 1MB (in 4KB pages) */
-	md->attribute = EFI_MEMORY_WB;
-
-	/* fill in a memory descriptor: */
-	md = &efi_memmap[1];
-	md->type = EFI_CONVENTIONAL_MEMORY;
-	md->pad = 0;
-	md->phys_addr = 2*MB;
-	md->virt_addr = 0;
-	md->num_pages = (128*MB) >> 12;	/* 128MB (in 4KB pages) */
-	md->attribute = EFI_MEMORY_WB;
-
-	/* descriptor for firmware emulator: */
-	md = &efi_memmap[2];
-	md->type = EFI_PAL_CODE;
-	md->pad = 0;
-	md->phys_addr = 1*MB;
-	md->virt_addr = 1*MB;
-	md->num_pages = (1*MB) >> 12;	/* 1MB (in 4KB pages) */
-	md->attribute = EFI_MEMORY_WB;
-
-#if 0
-	/*
-	 * XXX bootmem is broken for now... (remember to NUM_MEM_DESCS
-	 * if you re-enable this!)
-	 */
-
-	/* descriptor for high memory (>4GB): */
-	md = &efi_memmap[3];
-	md->type = EFI_CONVENTIONAL_MEMORY;
-	md->pad = 0;
-	md->phys_addr = 4096*MB;
-	md->virt_addr = 0;
-	md->num_pages = (32*MB) >> 12;	/* 32MB (in 4KB pages) */
-	md->attribute = EFI_MEMORY_WB;
+	MAKE_MD(EFI_BOOT_SERVICES_DATA,		EFI_MEMORY_WB,    0*MB,    1*MB);
+	MAKE_MD(EFI_PAL_CODE,			EFI_MEMORY_WB,    1*MB,    2*MB);
+	MAKE_MD(EFI_CONVENTIONAL_MEMORY,	EFI_MEMORY_WB,    2*MB,  130*MB);
+	MAKE_MD(EFI_CONVENTIONAL_MEMORY,	EFI_MEMORY_WB, 4096*MB, 4128*MB);
+#else
+	MAKE_MD( 4,		   0x9, 0x0000000000000000, 0x0000000000001000);
+	MAKE_MD( 7,		   0x9, 0x0000000000001000, 0x000000000008a000);
+	MAKE_MD( 4,		   0x9, 0x000000000008a000, 0x00000000000a0000);
+	MAKE_MD( 5, 0x8000000000000009, 0x00000000000c0000, 0x0000000000100000);
+	MAKE_MD( 7,		   0x9, 0x0000000000100000, 0x0000000004400000);
+	MAKE_MD( 2,		   0x9, 0x0000000004400000, 0x0000000004be5000);
+	MAKE_MD( 7,		   0x9, 0x0000000004be5000, 0x000000007f77e000);
+	MAKE_MD( 6, 0x8000000000000009, 0x000000007f77e000, 0x000000007fb94000);
+	MAKE_MD( 6, 0x8000000000000009, 0x000000007fb94000, 0x000000007fb95000);
+	MAKE_MD( 6, 0x8000000000000009, 0x000000007fb95000, 0x000000007fc00000);
+	MAKE_MD(13, 0x8000000000000009, 0x000000007fc00000, 0x000000007fc3a000);
+	MAKE_MD( 7,		   0x9, 0x000000007fc3a000, 0x000000007fea0000);
+	MAKE_MD( 5, 0x8000000000000009, 0x000000007fea0000, 0x000000007fea8000);
+	MAKE_MD( 7,		   0x9, 0x000000007fea8000, 0x000000007feab000);
+	MAKE_MD( 5, 0x8000000000000009, 0x000000007feab000, 0x000000007ffff000);
+	MAKE_MD( 7,		   0x9, 0x00000000ff400000, 0x0000000104000000);
 #endif
 
 	bp->efi_systab = __pa(&fw_mem);

arch/ia64/kernel/ia64_ksyms.c

@@ -86,7 +86,7 @@ EXPORT_SYMBOL(cpu_online_map);
 EXPORT_SYMBOL(ia64_cpu_to_sapicid);
 #else /* !CONFIG_SMP */
 
-EXPORT_SYMBOL(__flush_tlb_all);
+EXPORT_SYMBOL(local_flush_tlb_all);
 
 #endif /* !CONFIG_SMP */
 

arch/ia64/kernel/mca.c

@@ -69,10 +69,10 @@ u64				ia64_mca_stackframe[32];
 u64				ia64_mca_bspstore[1024];
 u64				ia64_init_stack[KERNEL_STACK_SIZE] __attribute__((aligned(16)));
 u64				ia64_mca_sal_data_area[1356];
-u64				ia64_mca_min_state_save_info;
 u64				ia64_tlb_functional;
 u64				ia64_os_mca_recovery_successful;
-
+/* TODO: need to assign min-state structure to UC memory */
+u64				ia64_mca_min_state_save_info[MIN_STATE_AREA_SIZE] __attribute__((aligned(512)));
 static void			ia64_mca_wakeup_ipi_wait(void);
 static void			ia64_mca_wakeup(int cpu);
 static void			ia64_mca_wakeup_all(void);
@@ -116,7 +116,7 @@ static struct irqaction mca_cpe_irqaction = {
  *  Outputs :   platform error status
  */
 int
-ia64_mca_log_sal_error_record(int sal_info_type)
+ia64_mca_log_sal_error_record(int sal_info_type, int called_from_init)
 {
 	int platform_err = 0;
 
@@ -131,7 +131,10 @@ ia64_mca_log_sal_error_record(int sal_info_type)
 	 */
 
 	platform_err = ia64_log_print(sal_info_type, (prfunc_t)printk);
-	ia64_sal_clear_state_info(sal_info_type);
+	/* temporary: only clear SAL logs on hardware-corrected errors
+		or if we're logging an error after an MCA-initiated reboot */
+	if ((sal_info_type > 1) || (called_from_init))
+		ia64_sal_clear_state_info(sal_info_type);
 
 	return platform_err;
 }
@@ -152,7 +155,7 @@ ia64_mca_cpe_int_handler (int cpe_irq, void *arg, struct pt_regs *ptregs)
 	IA64_MCA_DEBUG("ia64_mca_cpe_int_handler: received interrupt. vector = %#x\n", cpe_irq);
 
 	/* Get the CMC error record and log it */
-	ia64_mca_log_sal_error_record(SAL_INFO_TYPE_CPE);
+	ia64_mca_log_sal_error_record(SAL_INFO_TYPE_CPE, 0);
 }
 
 /*
@@ -199,13 +202,15 @@ ia64_mca_init_platform (void)
  *
  *  Outputs :   None
  */
-void
+int
 ia64_mca_check_errors (void)
 {
 	/*
 	 *  If there is an MCA error record pending, get it and log it.
 	 */
-	ia64_mca_log_sal_error_record(SAL_INFO_TYPE_MCA);
+	ia64_mca_log_sal_error_record(SAL_INFO_TYPE_MCA, 1);
+
+	return 0;
 }
 
 device_initcall(ia64_mca_check_errors);
@@ -237,49 +242,26 @@ ia64_mca_register_cpev (int cpev)
 
 #endif /* PLATFORM_MCA_HANDLERS */
 
-static char *min_state_labels[] = {
-	"nat",
-	"r1", "r2", "r3", "r4", "r5", "r6", "r7", "r8",
-	"r9", "r10","r11", "r12","r13","r14", "r15",
-	"b0r16","b0r17", "b0r18", "b0r19", "b0r20",
-	"b0r21", "b0r22","b0r23", "b0r24", "b0r25",
-	"b0r26", "b0r27", "b0r28","b0r29", "b0r30", "b0r31",
-	"r16", "r17", "r18","r19", "r20", "r21","r22",
-	"r23", "r24","r25", "r26", "r27","r28", "r29", "r30","r31",
-	"preds", "br0", "rsc",
-	"iip", "ipsr", "ifs",
-	"xip", "xpsr", "xfs"
-};
-
-int ia64_pmss_dump_bank0=0;  /* dump bank 0 ? */
-
 /*
  * routine to process and prepare to dump min_state_save
  * information for debugging purposes.
  *
  */
 void
-ia64_process_min_state_save (pal_min_state_area_t *pmss, struct pt_regs *ptregs)
+ia64_process_min_state_save (pal_min_state_area_t *pmss)
 {
-	int i, max=57;
-	u64 *tpmss_ptr=(u64 *)pmss;
+	int i, max = MIN_STATE_AREA_SIZE;
+	u64 *tpmss_ptr = (u64 *)pmss;
+	u64 *return_min_state_ptr = ia64_mca_min_state_save_info;
 
 	/* dump out the min_state_area information */
 
 	for (i=0;i<max;i++) {
 
-		if(!ia64_pmss_dump_bank0) {
-			if(strncmp("B0",min_state_labels[i],2)==0) {
-				tpmss_ptr++;  /* skip to next entry */
-				continue;
-			}
-		}
-
-		printk("%5s=0x%16.16lx ",min_state_labels[i],*tpmss_ptr++);
+		/* copy min-state register info for eventual return to PAL */
+		*return_min_state_ptr++ = *tpmss_ptr;
 
-		if (((i+1)%3)==0 || ((!strcmp("GR16",min_state_labels[i]))
-				     && !ia64_pmss_dump_bank0))
-			printk("\n");
+		tpmss_ptr++;  /* skip to next entry */
 	}
 }
 
@@ -525,19 +507,17 @@ ia64_mca_init(void)
 	ia64_log_init(SAL_INFO_TYPE_CMC);
 	ia64_log_init(SAL_INFO_TYPE_CPE);
 
-	/* Zero the min state save info */
-	ia64_mca_min_state_save_info = 0;
-
 #if defined(MCA_TEST)
 	mca_test();
 #endif /* #if defined(MCA_TEST) */
 
 	printk("Mca related initialization done\n");
 
-#if 0   // Too early in initialization -- error log is lost
+	/* commented out because this is done elsewhere */
+#if 0
 	/* Do post-failure MCA error logging */
 	ia64_mca_check_errors();
-#endif  // Too early in initialization -- error log is lost
+#endif
 }
 
 /*
@@ -632,7 +612,6 @@ ia64_mca_rendez_int_handler(int rendez_irq, void *arg, struct pt_regs *ptregs)
 	int cpu = 0;
 
 	/* Mask all interrupts */
-#warning XXX fix me: this used to be: save_and_cli(flags);
 	local_irq_save(flags);
 
 #ifdef CONFIG_SMP
@@ -709,8 +688,8 @@ ia64_return_to_sal_check(void)
 	ia64_os_to_sal_handoff_state.imots_context = IA64_MCA_SAME_CONTEXT;
 
 	/* Register pointer to new min state values */
-	/* NOTE: need to do something with this during recovery phase */
-	ia64_os_to_sal_handoff_state.imots_new_min_state = &ia64_mca_min_state_save_info;
+	ia64_os_to_sal_handoff_state.imots_new_min_state =
+		ia64_mca_min_state_save_info;
 }
 
 /*
@@ -735,7 +714,7 @@ ia64_mca_ucmc_handler(void)
 	int platform_err = 0;
 
 	/* Get the MCA error record and log it */
-	platform_err = ia64_mca_log_sal_error_record(SAL_INFO_TYPE_MCA);
+	platform_err = ia64_mca_log_sal_error_record(SAL_INFO_TYPE_MCA, 0);
 
 	/*
 	 *  Do Platform-specific mca error handling if required.
@@ -775,7 +754,7 @@ ia64_mca_cmc_int_handler(int cmc_irq, void *arg, struct pt_regs *ptregs)
 		       cmc_irq, smp_processor_id());
 
 	/* Get the CMC error record and log it */
-	ia64_mca_log_sal_error_record(SAL_INFO_TYPE_CMC);
+	ia64_mca_log_sal_error_record(SAL_INFO_TYPE_CMC, 0);
 }
 
 /*
@@ -845,8 +824,7 @@ ia64_init_handler (struct pt_regs *regs)
 	plog_ptr=(ia64_err_rec_t *)IA64_LOG_CURR_BUFFER(SAL_INFO_TYPE_INIT);
 	proc_ptr = &plog_ptr->proc_err;
 
-	ia64_process_min_state_save(&proc_ptr->processor_static_info.min_state_area,
-				    regs);
+	ia64_process_min_state_save(&proc_ptr->processor_static_info.min_state_area);
 
 	/* Clear the INIT SAL logs now that they have been saved in the OS buffer */
 	ia64_sal_clear_state_info(SAL_INFO_TYPE_INIT);
@@ -1677,6 +1655,9 @@ ia64_log_proc_dev_err_info_print (sal_log_processor_info_t  *slpi,
 	if (slpi->valid.psi_static_struct) {
 		spsi = (sal_processor_static_info_t *)p_data;
 
+		/* copy interrupted context PAL min-state info */
+		ia64_process_min_state_save(&spsi->min_state_area);
+
 		/* Print branch register contents if valid */
 		if (spsi->valid.br)
 			ia64_log_processor_regs_print(spsi->br, 8, "Branch", "br",

arch/ia64/kernel/smp.c

@@ -206,8 +206,20 @@ smp_send_reschedule_all (void)
 void
 smp_flush_tlb_all (void)
 {
-	smp_call_function((void (*)(void *))__flush_tlb_all, 0, 1, 1);
-	__flush_tlb_all();
+	smp_call_function((void (*)(void *))local_flush_tlb_all, 0, 1, 1);
+	local_flush_tlb_all();
+}
+
+void
+smp_flush_tlb_mm (struct mm_struct *mm)
+{
+	local_flush_tlb_mm(mm);
+
+	/* this happens for the common case of a single-threaded fork():  */
+	if (likely(mm == current->active_mm && atomic_read(&mm->mm_users) == 1))
+		return;
+
+	smp_call_function((void (*)(void *))local_flush_tlb_mm, mm, 1, 1);
 }
 
 /*

arch/ia64/kernel/sys_ia64.c

@@ -317,6 +317,29 @@ sys_free_hugepages (unsigned long  addr)
 
 #endif /* !CONFIG_HUGETLB_PAGE */
 
+asmlinkage unsigned long
+ia64_mremap (unsigned long addr, unsigned long old_len, unsigned long new_len, unsigned long flags,
+	     unsigned long new_addr)
+{
+	extern unsigned long do_mremap (unsigned long addr,
+					unsigned long old_len,
+					unsigned long new_len,
+					unsigned long flags,
+					unsigned long new_addr);
+
+	down_write(&current->mm->mmap_sem);
+	{
+		addr = do_mremap(addr, old_len, new_len, flags, new_addr);
+	}
+	up_write(&current->mm->mmap_sem);
+
+	if (IS_ERR((void *) addr))
+		return addr;
+
+	force_successful_syscall_return();
+	return addr;
+}
+
 asmlinkage long
 sys_vm86 (long arg0, long arg1, long arg2, long arg3)
 {

arch/ia64/mm/tlb.c

@@ -84,7 +84,7 @@ wrap_mmu_context (struct mm_struct *mm)
 	for (i = 0; i < NR_CPUS; ++i)
 		if (i != smp_processor_id())
 			per_cpu(ia64_need_tlb_flush, i) = 1;
-	__flush_tlb_all();
+	local_flush_tlb_all();
 }
 
 void
@@ -108,7 +108,7 @@ ia64_global_tlb_purge (unsigned long start, unsigned long end, unsigned long nbi
 }
 
 void
-__flush_tlb_all (void)
+local_flush_tlb_all (void)
 {
 	unsigned long i, j, flags, count0, count1, stride0, stride1, addr;
 
@@ -194,5 +194,5 @@ ia64_tlb_init (void)
 	local_cpu_data->ptce_stride[0] = ptce_info.stride[0];
 	local_cpu_data->ptce_stride[1] = ptce_info.stride[1];
 
-	__flush_tlb_all();		/* nuke left overs from bootstrapping... */
+	local_flush_tlb_all();		/* nuke left overs from bootstrapping... */
 }

arch/ia64/pci/pci.c

@@ -44,10 +44,6 @@
 #define DBG(x...)
 #endif
 
-#ifdef CONFIG_IA64_MCA
-extern void ia64_mca_check_errors( void );
-#endif
-
 struct pci_fixup pcibios_fixups[1];
 
 /*

arch/ia64/sn/configs/sn1/defconfig-dig-mp

-#
-# Automatically generated make config: don't edit
-#
-
-#
-# Code maturity level options
-#
-# CONFIG_EXPERIMENTAL is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# General setup
-#
-CONFIG_IA64=y
-# CONFIG_ISA is not set
-# CONFIG_EISA is not set
-# CONFIG_MCA is not set
-# CONFIG_SBUS is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_ACPI=y
-CONFIG_ACPI_EFI=y
-CONFIG_ACPI_INTERPRETER=y
-CONFIG_ACPI_KERNEL_CONFIG=y
-CONFIG_ITANIUM=y
-# CONFIG_MCKINLEY is not set
-# CONFIG_IA64_GENERIC is not set
-CONFIG_IA64_DIG=y
-# CONFIG_IA64_HP_SIM is not set
-# CONFIG_IA64_SGI_SN1 is not set
-# CONFIG_IA64_SGI_SN2 is not set
-# CONFIG_IA64_PAGE_SIZE_4KB is not set
-# CONFIG_IA64_PAGE_SIZE_8KB is not set
-CONFIG_IA64_PAGE_SIZE_16KB=y
-# CONFIG_IA64_PAGE_SIZE_64KB is not set
-CONFIG_IA64_BRL_EMU=y
-CONFIG_ITANIUM_BSTEP_SPECIFIC=y
-CONFIG_IA64_L1_CACHE_SHIFT=6
-# CONFIG_NUMA is not set
-# CONFIG_IA64_MCA is not set
-CONFIG_PM=y
-CONFIG_IA64_HAVE_SYNCRONIZED_ITC=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_KCORE_ELF=y
-CONFIG_SMP=y
-# CONFIG_IA32_SUPPORT is not set
-# CONFIG_PERFMON is not set
-# CONFIG_IA64_PALINFO is not set
-# CONFIG_EFI_VARS is not set
-# CONFIG_NET is not set
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ACPI_DEBUG is not set
-# CONFIG_ACPI_BUSMGR is not set
-# CONFIG_ACPI_SYS is not set
-# CONFIG_ACPI_CPU is not set
-# CONFIG_ACPI_BUTTON is not set
-# CONFIG_ACPI_AC is not set
-# CONFIG_ACPI_EC is not set
-# CONFIG_ACPI_CMBATT is not set
-# CONFIG_ACPI_THERMAL is not set
-CONFIG_PCI=y
-# CONFIG_PCI_NAMES is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_PCMCIA is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Plug and Play configuration
-#
-# CONFIG_PNP is not set
-# CONFIG_ISAPNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-# CONFIG_I2O_PCI is not set
-# CONFIG_I2O_BLOCK is not set
-# CONFIG_I2O_SCSI is not set
-# CONFIG_I2O_PROC is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-# CONFIG_BLK_DEV_MD is not set
-# CONFIG_MD_LINEAR is not set
-# CONFIG_MD_RAID0 is not set
-# CONFIG_MD_RAID1 is not set
-# CONFIG_MD_RAID5 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_BLK_DEV_LVM is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-CONFIG_IDE=y
-
-#
-# IDE, ATA and ATAPI Block devices
-#
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_HD_IDE is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_CMD640 is not set
-# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
-# CONFIG_BLK_DEV_ISAPNP is not set
-# CONFIG_BLK_DEV_RZ1000 is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_IDE_MODES is not set
-# CONFIG_BLK_DEV_ATARAID is not set
-# CONFIG_BLK_DEV_ATARAID_PDC is not set
-# CONFIG_BLK_DEV_ATARAID_HPT is not set
-
-#
-# Alternate 1394 support
-#
-# CONFIG_X1394 is not set
-
-#
-# Alternate SCSI support
-#
-# CONFIG_XSCSI is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# CD-ROM drivers (not for SCSI or IDE/ATAPI drives)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Input core support
-#
-# CONFIG_INPUT is not set
-# CONFIG_INPUT_KEYBDEV is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-# CONFIG_SERIAL is not set
-# CONFIG_SERIAL_EXTENDED is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=256
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_MOUSE is not set
-
-#
-# Joysticks
-#
-# CONFIG_INPUT_GAMEPORT is not set
-
-#
-# Input core support is needed for gameports
-#
-
-#
-# Input core support is needed for joysticks
-#
-# CONFIG_QIC02_TAPE is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_INTEL_RNG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_EFI_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_MWAVE is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# File systems
-#
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_ADFS_FS is not set
-# CONFIG_ADFS_FS_RW is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_FAT_FS is not set
-# CONFIG_MSDOS_FS is not set
-# CONFIG_UMSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-CONFIG_TMPFS=y
-# CONFIG_RAMFS is not set
-# CONFIG_ISO9660_FS is not set
-# CONFIG_JOLIET is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_NTFS_FS is not set
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-# CONFIG_HPFS_FS is not set
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVFS_MOUNT is not set
-# CONFIG_DEVFS_DEBUG is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_QNX4FS_RW is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_EXT2_FS=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UDF_FS is not set
-# CONFIG_UDF_RW is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_XFS_SUPPORT is not set
-# CONFIG_NCPFS_NLS is not set
-# CONFIG_SMB_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_SMB_NLS is not set
-# CONFIG_NLS is not set
-
-#
-# Console drivers
-#
-CONFIG_VGA_CONSOLE=y
-
-#
-# Frame-buffer support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Controllers
-#
-# CONFIG_USB_UHCI is not set
-# CONFIG_USB_UHCI_ALT is not set
-# CONFIG_USB_OHCI is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_BLUETOOTH is not set
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_HP8200e is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# USB Human Interface Devices (HID)
-#
-
-#
-#   Input core support is needed for USB HID
-#
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_DC2XX is not set
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_SCANNER is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_HPUSBSCSI is not set
-
-#
-# USB Multimedia devices
-#
-
-#
-#   Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network adaptors
-#
-
-#
-#   Networking support is needed for USB Networking device support
-#
-
-#
-# USB port drivers
-#
-# CONFIG_USB_USS720 is not set
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_RIO500 is not set
-
-#
-# Kernel hacking
-#
-CONFIG_DEBUG_KERNEL=y
-CONFIG_IA64_PRINT_HAZARDS=y
-# CONFIG_DISABLE_VHPT is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_IA64_EARLY_PRINTK=y
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_IA64_DEBUG_CMPXCHG is not set
-# CONFIG_IA64_DEBUG_IRQ is not set
-# CONFIG_KDB is not set
-# CONFIG_KDB_MODULES is not set
-# CONFIG_KALLSYMS is not set

arch/ia64/sn/configs/sn1/defconfig-dig-sp

-#
-# Automatically generated make config: don't edit
-#
-
-#
-# Code maturity level options
-#
-# CONFIG_EXPERIMENTAL is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# General setup
-#
-CONFIG_IA64=y
-# CONFIG_ISA is not set
-# CONFIG_EISA is not set
-# CONFIG_MCA is not set
-# CONFIG_SBUS is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_ACPI=y
-CONFIG_ACPI_EFI=y
-CONFIG_ACPI_INTERPRETER=y
-CONFIG_ACPI_KERNEL_CONFIG=y
-CONFIG_ITANIUM=y
-# CONFIG_MCKINLEY is not set
-# CONFIG_IA64_GENERIC is not set
-CONFIG_IA64_DIG=y
-# CONFIG_IA64_HP_SIM is not set
-# CONFIG_IA64_SGI_SN1 is not set
-# CONFIG_IA64_SGI_SN2 is not set
-# CONFIG_IA64_PAGE_SIZE_4KB is not set
-# CONFIG_IA64_PAGE_SIZE_8KB is not set
-CONFIG_IA64_PAGE_SIZE_16KB=y
-# CONFIG_IA64_PAGE_SIZE_64KB is not set
-CONFIG_IA64_BRL_EMU=y
-CONFIG_ITANIUM_BSTEP_SPECIFIC=y
-CONFIG_IA64_L1_CACHE_SHIFT=6
-# CONFIG_NUMA is not set
-# CONFIG_IA64_MCA is not set
-CONFIG_PM=y
-CONFIG_IA64_HAVE_SYNCRONIZED_ITC=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_KCORE_ELF=y
-# CONFIG_SMP is not set
-# CONFIG_IA32_SUPPORT is not set
-# CONFIG_PERFMON is not set
-# CONFIG_IA64_PALINFO is not set
-# CONFIG_EFI_VARS is not set
-# CONFIG_NET is not set
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ACPI_DEBUG is not set
-# CONFIG_ACPI_BUSMGR is not set
-# CONFIG_ACPI_SYS is not set
-# CONFIG_ACPI_CPU is not set
-# CONFIG_ACPI_BUTTON is not set
-# CONFIG_ACPI_AC is not set
-# CONFIG_ACPI_EC is not set
-# CONFIG_ACPI_CMBATT is not set
-# CONFIG_ACPI_THERMAL is not set
-CONFIG_PCI=y
-# CONFIG_PCI_NAMES is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_PCMCIA is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Plug and Play configuration
-#
-# CONFIG_PNP is not set
-# CONFIG_ISAPNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-# CONFIG_I2O_PCI is not set
-# CONFIG_I2O_BLOCK is not set
-# CONFIG_I2O_SCSI is not set
-# CONFIG_I2O_PROC is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-# CONFIG_BLK_DEV_MD is not set
-# CONFIG_MD_LINEAR is not set
-# CONFIG_MD_RAID0 is not set
-# CONFIG_MD_RAID1 is not set
-# CONFIG_MD_RAID5 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_BLK_DEV_LVM is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-CONFIG_IDE=y
-
-#
-# IDE, ATA and ATAPI Block devices
-#
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_HD_IDE is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_CMD640 is not set
-# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
-# CONFIG_BLK_DEV_ISAPNP is not set
-# CONFIG_BLK_DEV_RZ1000 is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_IDE_MODES is not set
-# CONFIG_BLK_DEV_ATARAID is not set
-# CONFIG_BLK_DEV_ATARAID_PDC is not set
-# CONFIG_BLK_DEV_ATARAID_HPT is not set
-
-#
-# Alternate 1394 support
-#
-# CONFIG_X1394 is not set
-
-#
-# Alternate SCSI support
-#
-# CONFIG_XSCSI is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# CD-ROM drivers (not for SCSI or IDE/ATAPI drives)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Input core support
-#
-# CONFIG_INPUT is not set
-# CONFIG_INPUT_KEYBDEV is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-# CONFIG_SERIAL is not set
-# CONFIG_SERIAL_EXTENDED is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=256
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_MOUSE is not set
-
-#
-# Joysticks
-#
-# CONFIG_INPUT_GAMEPORT is not set
-
-#
-# Input core support is needed for gameports
-#
-
-#
-# Input core support is needed for joysticks
-#
-# CONFIG_QIC02_TAPE is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_INTEL_RNG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_EFI_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_MWAVE is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# File systems
-#
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_ADFS_FS is not set
-# CONFIG_ADFS_FS_RW is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_FAT_FS is not set
-# CONFIG_MSDOS_FS is not set
-# CONFIG_UMSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-CONFIG_TMPFS=y
-# CONFIG_RAMFS is not set
-# CONFIG_ISO9660_FS is not set
-# CONFIG_JOLIET is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_NTFS_FS is not set
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-# CONFIG_HPFS_FS is not set
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVFS_MOUNT is not set
-# CONFIG_DEVFS_DEBUG is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_QNX4FS_RW is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_EXT2_FS=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UDF_FS is not set
-# CONFIG_UDF_RW is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_XFS_SUPPORT is not set
-# CONFIG_NCPFS_NLS is not set
-# CONFIG_SMB_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_SMB_NLS is not set
-# CONFIG_NLS is not set
-
-#
-# Console drivers
-#
-CONFIG_VGA_CONSOLE=y
-
-#
-# Frame-buffer support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Controllers
-#
-# CONFIG_USB_UHCI is not set
-# CONFIG_USB_UHCI_ALT is not set
-# CONFIG_USB_OHCI is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_BLUETOOTH is not set
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_HP8200e is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# USB Human Interface Devices (HID)
-#
-
-#
-#   Input core support is needed for USB HID
-#
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_DC2XX is not set
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_SCANNER is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_HPUSBSCSI is not set
-
-#
-# USB Multimedia devices
-#
-
-#
-#   Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network adaptors
-#
-
-#
-#   Networking support is needed for USB Networking device support
-#
-
-#
-# USB port drivers
-#
-# CONFIG_USB_USS720 is not set
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_RIO500 is not set
-
-#
-# Kernel hacking
-#
-CONFIG_DEBUG_KERNEL=y
-CONFIG_IA64_PRINT_HAZARDS=y
-# CONFIG_DISABLE_VHPT is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_IA64_EARLY_PRINTK=y
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_IA64_DEBUG_CMPXCHG is not set
-# CONFIG_IA64_DEBUG_IRQ is not set
-# CONFIG_KDB is not set
-# CONFIG_KDB_MODULES is not set
-# CONFIG_KALLSYMS is not set

arch/ia64/sn/configs/sn1/defconfig-generic-mp

-#
-# Automatically generated make config: don't edit
-#
-
-#
-# Code maturity level options
-#
-# CONFIG_EXPERIMENTAL is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# General setup
-#
-CONFIG_IA64=y
-# CONFIG_ISA is not set
-# CONFIG_EISA is not set
-# CONFIG_MCA is not set
-# CONFIG_SBUS is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_ACPI=y
-CONFIG_ACPI_EFI=y
-CONFIG_ACPI_INTERPRETER=y
-CONFIG_ACPI_KERNEL_CONFIG=y
-CONFIG_ITANIUM=y
-# CONFIG_MCKINLEY is not set
-CONFIG_IA64_GENERIC=y
-# CONFIG_IA64_DIG is not set
-# CONFIG_IA64_HP_SIM is not set
-# CONFIG_IA64_SGI_SN1 is not set
-# CONFIG_IA64_SGI_SN2 is not set
-# CONFIG_IA64_PAGE_SIZE_4KB is not set
-# CONFIG_IA64_PAGE_SIZE_8KB is not set
-CONFIG_IA64_PAGE_SIZE_16KB=y
-# CONFIG_IA64_PAGE_SIZE_64KB is not set
-CONFIG_IA64_BRL_EMU=y
-CONFIG_ITANIUM_BSTEP_SPECIFIC=y
-CONFIG_IA64_L1_CACHE_SHIFT=6
-CONFIG_KCORE_ELF=y
-CONFIG_SMP=y
-# CONFIG_IA32_SUPPORT is not set
-CONFIG_PERFMON=y
-CONFIG_IA64_PALINFO=y
-# CONFIG_EFI_VARS is not set
-# CONFIG_NET is not set
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ACPI_DEBUG is not set
-# CONFIG_ACPI_BUSMGR is not set
-# CONFIG_ACPI_SYS is not set
-# CONFIG_ACPI_CPU is not set
-# CONFIG_ACPI_BUTTON is not set
-# CONFIG_ACPI_AC is not set
-# CONFIG_ACPI_EC is not set
-# CONFIG_ACPI_CMBATT is not set
-# CONFIG_ACPI_THERMAL is not set
-CONFIG_PCI=y
-# CONFIG_PCI_NAMES is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_PCMCIA is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Plug and Play configuration
-#
-# CONFIG_PNP is not set
-# CONFIG_ISAPNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-# CONFIG_I2O_PCI is not set
-# CONFIG_I2O_BLOCK is not set
-# CONFIG_I2O_SCSI is not set
-# CONFIG_I2O_PROC is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-# CONFIG_BLK_DEV_MD is not set
-# CONFIG_MD_LINEAR is not set
-# CONFIG_MD_RAID0 is not set
-# CONFIG_MD_RAID1 is not set
-# CONFIG_MD_RAID5 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_BLK_DEV_LVM is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-CONFIG_IDE=y
-
-#
-# IDE, ATA and ATAPI Block devices
-#
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_HD_IDE is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_CMD640 is not set
-# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
-# CONFIG_BLK_DEV_ISAPNP is not set
-# CONFIG_BLK_DEV_RZ1000 is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_IDE_MODES is not set
-# CONFIG_BLK_DEV_ATARAID is not set
-# CONFIG_BLK_DEV_ATARAID_PDC is not set
-# CONFIG_BLK_DEV_ATARAID_HPT is not set
-
-#
-# Alternate 1394 support
-#
-# CONFIG_X1394 is not set
-
-#
-# Alternate SCSI support
-#
-# CONFIG_XSCSI is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# CD-ROM drivers (not for SCSI or IDE/ATAPI drives)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Input core support
-#
-# CONFIG_INPUT is not set
-# CONFIG_INPUT_KEYBDEV is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-# CONFIG_SERIAL is not set
-# CONFIG_SERIAL_EXTENDED is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=256
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_MOUSE is not set
-
-#
-# Joysticks
-#
-# CONFIG_INPUT_GAMEPORT is not set
-
-#
-# Input core support is needed for gameports
-#
-
-#
-# Input core support is needed for joysticks
-#
-# CONFIG_QIC02_TAPE is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_INTEL_RNG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_EFI_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_MWAVE is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# File systems
-#
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_ADFS_FS is not set
-# CONFIG_ADFS_FS_RW is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_FAT_FS is not set
-# CONFIG_MSDOS_FS is not set
-# CONFIG_UMSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-CONFIG_TMPFS=y
-# CONFIG_RAMFS is not set
-# CONFIG_ISO9660_FS is not set
-# CONFIG_JOLIET is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_NTFS_FS is not set
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-# CONFIG_HPFS_FS is not set
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVFS_MOUNT is not set
-# CONFIG_DEVFS_DEBUG is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_QNX4FS_RW is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_EXT2_FS=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UDF_FS is not set
-# CONFIG_UDF_RW is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_XFS_SUPPORT is not set
-# CONFIG_NCPFS_NLS is not set
-# CONFIG_SMB_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_SMB_NLS is not set
-# CONFIG_NLS is not set
-
-#
-# Console drivers
-#
-CONFIG_VGA_CONSOLE=y
-
-#
-# Frame-buffer support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Controllers
-#
-# CONFIG_USB_UHCI is not set
-# CONFIG_USB_UHCI_ALT is not set
-# CONFIG_USB_OHCI is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_BLUETOOTH is not set
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_HP8200e is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# USB Human Interface Devices (HID)
-#
-
-#
-#   Input core support is needed for USB HID
-#
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_DC2XX is not set
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_SCANNER is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_HPUSBSCSI is not set
-
-#
-# USB Multimedia devices
-#
-
-#
-#   Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network adaptors
-#
-
-#
-#   Networking support is needed for USB Networking device support
-#
-
-#
-# USB port drivers
-#
-# CONFIG_USB_USS720 is not set
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_RIO500 is not set
-
-#
-# Simulated drivers
-#
-# CONFIG_SIMETH is not set
-# CONFIG_SIM_SERIAL is not set
-
-#
-# Kernel hacking
-#
-CONFIG_DEBUG_KERNEL=y
-CONFIG_IA64_PRINT_HAZARDS=y
-# CONFIG_DISABLE_VHPT is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_IA64_EARLY_PRINTK=y
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_IA64_DEBUG_CMPXCHG is not set
-# CONFIG_IA64_DEBUG_IRQ is not set
-# CONFIG_KDB is not set
-# CONFIG_KDB_MODULES is not set
-# CONFIG_KALLSYMS is not set

arch/ia64/sn/configs/sn1/defconfig-generic-sp

-#
-# Automatically generated make config: don't edit
-#
-
-#
-# Code maturity level options
-#
-# CONFIG_EXPERIMENTAL is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# General setup
-#
-CONFIG_IA64=y
-# CONFIG_ISA is not set
-# CONFIG_EISA is not set
-# CONFIG_MCA is not set
-# CONFIG_SBUS is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_ACPI=y
-CONFIG_ACPI_EFI=y
-CONFIG_ACPI_INTERPRETER=y
-CONFIG_ACPI_KERNEL_CONFIG=y
-CONFIG_ITANIUM=y
-# CONFIG_MCKINLEY is not set
-CONFIG_IA64_GENERIC=y
-# CONFIG_IA64_DIG is not set
-# CONFIG_IA64_HP_SIM is not set
-# CONFIG_IA64_SGI_SN1 is not set
-# CONFIG_IA64_SGI_SN2 is not set
-# CONFIG_IA64_PAGE_SIZE_4KB is not set
-# CONFIG_IA64_PAGE_SIZE_8KB is not set
-CONFIG_IA64_PAGE_SIZE_16KB=y
-# CONFIG_IA64_PAGE_SIZE_64KB is not set
-CONFIG_IA64_BRL_EMU=y
-CONFIG_ITANIUM_BSTEP_SPECIFIC=y
-CONFIG_IA64_L1_CACHE_SHIFT=6
-CONFIG_KCORE_ELF=y
-# CONFIG_SMP is not set
-# CONFIG_IA32_SUPPORT is not set
-CONFIG_PERFMON=y
-CONFIG_IA64_PALINFO=y
-# CONFIG_EFI_VARS is not set
-# CONFIG_NET is not set
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ACPI_DEBUG is not set
-# CONFIG_ACPI_BUSMGR is not set
-# CONFIG_ACPI_SYS is not set
-# CONFIG_ACPI_CPU is not set
-# CONFIG_ACPI_BUTTON is not set
-# CONFIG_ACPI_AC is not set
-# CONFIG_ACPI_EC is not set
-# CONFIG_ACPI_CMBATT is not set
-# CONFIG_ACPI_THERMAL is not set
-CONFIG_PCI=y
-# CONFIG_PCI_NAMES is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_PCMCIA is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Plug and Play configuration
-#
-# CONFIG_PNP is not set
-# CONFIG_ISAPNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-# CONFIG_I2O_PCI is not set
-# CONFIG_I2O_BLOCK is not set
-# CONFIG_I2O_SCSI is not set
-# CONFIG_I2O_PROC is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-# CONFIG_BLK_DEV_MD is not set
-# CONFIG_MD_LINEAR is not set
-# CONFIG_MD_RAID0 is not set
-# CONFIG_MD_RAID1 is not set
-# CONFIG_MD_RAID5 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_BLK_DEV_LVM is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-CONFIG_IDE=y
-
-#
-# IDE, ATA and ATAPI Block devices
-#
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_HD_IDE is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_CMD640 is not set
-# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
-# CONFIG_BLK_DEV_ISAPNP is not set
-# CONFIG_BLK_DEV_RZ1000 is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_IDE_MODES is not set
-# CONFIG_BLK_DEV_ATARAID is not set
-# CONFIG_BLK_DEV_ATARAID_PDC is not set
-# CONFIG_BLK_DEV_ATARAID_HPT is not set
-
-#
-# Alternate 1394 support
-#
-# CONFIG_X1394 is not set
-
-#
-# Alternate SCSI support
-#
-# CONFIG_XSCSI is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# CD-ROM drivers (not for SCSI or IDE/ATAPI drives)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Input core support
-#
-# CONFIG_INPUT is not set
-# CONFIG_INPUT_KEYBDEV is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-# CONFIG_SERIAL is not set
-# CONFIG_SERIAL_EXTENDED is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=256
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_MOUSE is not set
-
-#
-# Joysticks
-#
-# CONFIG_INPUT_GAMEPORT is not set
-
-#
-# Input core support is needed for gameports
-#
-
-#
-# Input core support is needed for joysticks
-#
-# CONFIG_QIC02_TAPE is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_INTEL_RNG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_EFI_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_MWAVE is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# File systems
-#
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_ADFS_FS is not set
-# CONFIG_ADFS_FS_RW is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_FAT_FS is not set
-# CONFIG_MSDOS_FS is not set
-# CONFIG_UMSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-CONFIG_TMPFS=y
-# CONFIG_RAMFS is not set
-# CONFIG_ISO9660_FS is not set
-# CONFIG_JOLIET is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_NTFS_FS is not set
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-# CONFIG_HPFS_FS is not set
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVFS_MOUNT is not set
-# CONFIG_DEVFS_DEBUG is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_QNX4FS_RW is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_EXT2_FS=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UDF_FS is not set
-# CONFIG_UDF_RW is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_XFS_SUPPORT is not set
-# CONFIG_NCPFS_NLS is not set
-# CONFIG_SMB_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_SMB_NLS is not set
-# CONFIG_NLS is not set
-
-#
-# Console drivers
-#
-CONFIG_VGA_CONSOLE=y
-
-#
-# Frame-buffer support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Controllers
-#
-# CONFIG_USB_UHCI is not set
-# CONFIG_USB_UHCI_ALT is not set
-# CONFIG_USB_OHCI is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_BLUETOOTH is not set
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_HP8200e is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# USB Human Interface Devices (HID)
-#
-
-#
-#   Input core support is needed for USB HID
-#
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_DC2XX is not set
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_SCANNER is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_HPUSBSCSI is not set
-
-#
-# USB Multimedia devices
-#
-
-#
-#   Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network adaptors
-#
-
-#
-#   Networking support is needed for USB Networking device support
-#
-
-#
-# USB port drivers
-#
-# CONFIG_USB_USS720 is not set
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_RIO500 is not set
-
-#
-# Simulated drivers
-#
-# CONFIG_SIMETH is not set
-# CONFIG_SIM_SERIAL is not set
-
-#
-# Kernel hacking
-#
-CONFIG_DEBUG_KERNEL=y
-CONFIG_IA64_PRINT_HAZARDS=y
-# CONFIG_DISABLE_VHPT is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_IA64_EARLY_PRINTK=y
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_IA64_DEBUG_CMPXCHG is not set
-# CONFIG_IA64_DEBUG_IRQ is not set
-# CONFIG_KDB is not set
-# CONFIG_KDB_MODULES is not set
-# CONFIG_KALLSYMS is not set

arch/ia64/sn/configs/sn1/defconfig-hp-sp

-#
-# Automatically generated make config: don't edit
-#
-
-#
-# Code maturity level options
-#
-# CONFIG_EXPERIMENTAL is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# General setup
-#
-CONFIG_IA64=y
-# CONFIG_ISA is not set
-# CONFIG_EISA is not set
-# CONFIG_MCA is not set
-# CONFIG_SBUS is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_ITANIUM=y
-# CONFIG_MCKINLEY is not set
-# CONFIG_IA64_GENERIC is not set
-# CONFIG_IA64_DIG is not set
-CONFIG_IA64_HP_SIM=y
-# CONFIG_IA64_SGI_SN1 is not set
-# CONFIG_IA64_SGI_SN2 is not set
-# CONFIG_IA64_PAGE_SIZE_4KB is not set
-# CONFIG_IA64_PAGE_SIZE_8KB is not set
-CONFIG_IA64_PAGE_SIZE_16KB=y
-# CONFIG_IA64_PAGE_SIZE_64KB is not set
-CONFIG_IA64_BRL_EMU=y
-CONFIG_ITANIUM_BSTEP_SPECIFIC=y
-CONFIG_IA64_L1_CACHE_SHIFT=6
-CONFIG_KCORE_ELF=y
-# CONFIG_SMP is not set
-# CONFIG_IA32_SUPPORT is not set
-# CONFIG_PERFMON is not set
-# CONFIG_IA64_PALINFO is not set
-# CONFIG_EFI_VARS is not set
-CONFIG_NET=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_FILTER is not set
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-
-#
-#  
-#
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Alternate 1394 support
-#
-# CONFIG_X1394 is not set
-
-#
-# Alternate SCSI support
-#
-# CONFIG_XSCSI is not set
-
-#
-# SCSI support
-#
-CONFIG_SCSI=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_SD_EXTRA_DEVS=40
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_DEBUG_QUEUES is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AHA1740 is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_AM53C974 is not set
-# CONFIG_SCSI_MEGARAID is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_DMA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_NCR53C7xx is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PCI2000 is not set
-# CONFIG_SCSI_PCI2220I is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SIM710 is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-
-#
-# Input core support
-#
-# CONFIG_INPUT is not set
-# CONFIG_INPUT_KEYBDEV is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-# CONFIG_SERIAL is not set
-# CONFIG_SERIAL_EXTENDED is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=256
-# CONFIG_PRINTER is not set
-# CONFIG_PPDEV is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_MOUSE is not set
-
-#
-# Joysticks
-#
-# CONFIG_INPUT_GAMEPORT is not set
-
-#
-# Input core support is needed for gameports
-#
-
-#
-# Input core support is needed for joysticks
-#
-# CONFIG_QIC02_TAPE is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_INTEL_RNG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-CONFIG_EFI_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_MWAVE is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# File systems
-#
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_ADFS_FS is not set
-# CONFIG_ADFS_FS_RW is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_FAT_FS is not set
-# CONFIG_MSDOS_FS is not set
-# CONFIG_UMSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-CONFIG_TMPFS=y
-# CONFIG_RAMFS is not set
-# CONFIG_ISO9660_FS is not set
-# CONFIG_JOLIET is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_NTFS_FS is not set
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-# CONFIG_HPFS_FS is not set
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVFS_MOUNT is not set
-# CONFIG_DEVFS_DEBUG is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_QNX4FS_RW is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_EXT2_FS=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UDF_FS is not set
-# CONFIG_UDF_RW is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_XFS_SUPPORT is not set
-
-#
-# Network File Systems
-#
-# CONFIG_CODA_FS is not set
-# CONFIG_NFS_FS is not set
-# CONFIG_NFS_V3 is not set
-# CONFIG_ROOT_NFS is not set
-# CONFIG_NFSD is not set
-# CONFIG_NFSD_V3 is not set
-# CONFIG_SUNRPC is not set
-# CONFIG_LOCKD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-# CONFIG_NCPFS_NLS is not set
-# CONFIG_NCPFS_EXTRAS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_SMB_NLS is not set
-# CONFIG_NLS is not set
-
-#
-# Console drivers
-#
-CONFIG_VGA_CONSOLE=y
-
-#
-# Frame-buffer support
-#
-# CONFIG_FB is not set
-
-#
-# Simulated drivers
-#
-CONFIG_SIMETH=y
-CONFIG_SIM_SERIAL=y
-CONFIG_SCSI_SIM=y
-
-#
-# Kernel hacking
-#
-CONFIG_DEBUG_KERNEL=y
-CONFIG_IA64_PRINT_HAZARDS=y
-# CONFIG_DISABLE_VHPT is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_IA64_EARLY_PRINTK=y
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_IA64_DEBUG_CMPXCHG is not set
-# CONFIG_IA64_DEBUG_IRQ is not set
-# CONFIG_KDB is not set
-# CONFIG_KDB_MODULES is not set
-# CONFIG_KALLSYMS is not set

include/asm-ia64/acpi.h

@@ -56,7 +56,7 @@
 
 #define ACPI_ACQUIRE_GLOBAL_LOCK(GLptr, Acq) \
 	do { \
-	__asm__ volatile ("1:  ld4      r29=%1\n"  \
+	__asm__ volatile ("1:  ld4      r29=[%1]\n"  \
 		";;\n"                  \
 		"mov    ar.ccv=r29\n"   \
 		"mov    r2=r29\n"       \
@@ -68,7 +68,7 @@
 		";;\n"                  \
 		"add    r29=r29,r30\n"  \
 		";;\n"                  \
-		"cmpxchg4.acq   r30=%1,r29,ar.ccv\n" \
+		"cmpxchg4.acq   r30=[%1],r29,ar.ccv\n" \
 		";;\n"                  \
 		"cmp.eq p6,p7=r2,r30\n" \
 		"(p7) br.dpnt.few 1b\n" \
@@ -76,24 +76,24 @@
 		";;\n"                  \
 		"(p8) mov %0=-1\n"      \
 		"(p9) mov %0=r0\n"      \
-		:"=r"(Acq):"m"(GLptr):"r2","r29","r30","memory"); \
+		:"=r"(Acq):"r"(GLptr):"r2","r29","r30","memory"); \
 	} while (0)
 
 #define ACPI_RELEASE_GLOBAL_LOCK(GLptr, Acq) \
 	do { \
-	__asm__ volatile ("1:  ld4      r29=%1\n" \
+	__asm__ volatile ("1:  ld4      r29=[%1]\n" \
 		";;\n"                  \
 		"mov    ar.ccv=r29\n"   \
 		"mov    r2=r29\n"       \
 		"and    r29=-4,r29\n"   \
 		";;\n"                  \
-		"cmpxchg4.acq   r30=%1,r29,ar.ccv\n" \
+		"cmpxchg4.acq   r30=[%1],r29,ar.ccv\n" \
 		";;\n"                  \
 		"cmp.eq p6,p7=r2,r30\n" \
 		"(p7) br.dpnt.few 1b\n" \
 		"and    %0=1,r2\n"      \
 		";;\n"                  \
-		:"=r"(Acq):"m"(GLptr):"r2","r29","r30","memory"); \
+		:"=r"(Acq):"r"(GLptr):"r2","r29","r30","memory"); \
 	} while (0)
 
 const char *acpi_get_sysname (void);

include/asm-ia64/mca.h

@@ -103,6 +103,8 @@ enum {
 	IA64_MCA_NEW_CONTEXT	=	-1	/* SAL to return to new context */
 };
 
+#define MIN_STATE_AREA_SIZE     57
+
 typedef struct ia64_mca_os_to_sal_state_s {
 	u64		imots_os_status;	/*   OS status to SAL as to what happened
 						 *   with the MCA handling.
@@ -133,7 +135,7 @@ extern void ia64_mca_cmc_int_handler(int,void *,struct pt_regs *);
 extern void ia64_mca_cpe_int_handler(int,void *,struct pt_regs *);
 extern int  ia64_log_print(int,prfunc_t);
 extern void ia64_mca_cmc_vector_setup(void);
-extern void ia64_mca_check_errors( void );
+extern int  ia64_mca_check_errors(void);
 extern u64  ia64_log_get(int, prfunc_t);
 
 #define PLATFORM_CALL(fn, args)	printk("Platform call TBD\n")