[PATCH] sk98lin-2.6: Kernel Update to Driver Version v6.21

Patch 1/4 (Update to version 6.21)
* Add: Common module update
* Add: New function for PCI initialization (SkGeInitPCI)
* Add: Yukon Plus changes (ChipID, PCI...)
* Add: Code for DIAG tool
* Fix: Problems while unloading the linux driver
* Fix: PrefPort=B not allowed on single NICs
* Fix: Fixed Linux System crash when using vlans
* Fix: Remove useless register_netdev
* Fix: Initalize Board before network configuration
* Fix: Modifications regarding try_module_get() and capable()

drivers/net/sk98lin/Makefile

@@ -76,7 +76,7 @@ endif
 # SK_DBGCAT_DRV_INT_SRC         0x04000000      interrupts sources
 # SK_DBGCAT_DRV_EVENT           0x08000000      driver events
 
-EXTRA_CFLAGS += -Idrivers/net/sk98lin -DSK_USE_CSUM -DGENESIS -DYUKON $(DBGDEF) $(SKPARAM)
+EXTRA_CFLAGS += -Idrivers/net/sk98lin -DSK_DIAG_SUPPORT -DSK_USE_CSUM -DGENESIS -DYUKON $(DBGDEF) $(SKPARAM)
 
 clean:
 	rm -f core *.o *.a *.s

drivers/net/sk98lin/h/skcsum.h

@@ -2,8 +2,8 @@
  *
  * Name:	skcsum.h
  * Project:	GEnesis - SysKonnect SK-NET Gigabit Ethernet (SK-98xx)
- * Version:	$Revision: 1.9 $
- * Date:	$Date: 2001/02/06 11:21:39 $
+ * Version:	$Revision: 1.10 $
+ * Date:	$Date: 2003/08/20 13:59:57 $
  * Purpose:	Store/verify Internet checksum in send/receive packets.
  *
  ******************************************************************************/
@@ -26,6 +26,10 @@
  * History:
  *
  *	$Log: skcsum.h,v $
+ *	Revision 1.10  2003/08/20 13:59:57  mschmid
+ *	Changed notation of #ifndef SkCsCalculateChecksum to
+ *	#ifndef SK_CS_CALCULATE_CHECKSUM
+ *	
  *	Revision 1.9  2001/02/06 11:21:39  rassmann
  *	Editorial changes.
  *	
@@ -226,11 +230,11 @@ typedef struct s_CsPacketInfo {
 
 /* function prototypes ********************************************************/
 
-#ifndef SkCsCalculateChecksum
+#ifndef SK_CS_CALCULATE_CHECKSUM
 extern unsigned SkCsCalculateChecksum(
 	void		*pData,
 	unsigned	Length);
-#endif
+#endif /* SK_CS_CALCULATE_CHECKSUM */
 
 extern int SkCsEvent(
 	SK_AC		*pAc,

drivers/net/sk98lin/h/skdrv1st.h

@@ -2,15 +2,16 @@
  *
  * Name:	skdrv1st.h
  * Project:	GEnesis, PCI Gigabit Ethernet Adapter
- * Version:	$Revision: 1.1 $
- * Date:	$Date: 2003/07/21 07:22:43 $
+ * Version:	$Revision: 1.4 $
+ * Date:	$Date: 2003/11/12 14:28:14 $
  * Purpose:	First header file for driver and all other modules
  *
  ******************************************************************************/
 
 /******************************************************************************
  *
- *	(C)Copyright 1998-2003 SysKonnect GmbH.
+ *	(C)Copyright 1998-2002 SysKonnect GmbH.
+ *	(C)Copyright 2002-2003 Marvell.
  *
  *	This program is free software; you can redistribute it and/or modify
  *	it under the terms of the GNU General Public License as published by
@@ -26,6 +27,15 @@
  * History:
  *
  *	$Log: skdrv1st.h,v $
+ *	Revision 1.4  2003/11/12 14:28:14  rroesler
+ *	Fix: use dedicated ip_fast_csum() on X86_64 systems
+ *	
+ *	Revision 1.3  2003/10/07 08:16:52  mlindner
+ *	Fix: Copyright changes
+ *	
+ *	Revision 1.2  2003/09/29 12:05:59  mlindner
+ *	Fix: Added define SK_CS_CALCULSTE_CHECKSUM
+ *	
  *	Revision 1.1  2003/07/21 07:22:43  rroesler
  *	Fix: Re-Enter after CVS crash
  *	
@@ -110,6 +120,9 @@
 #ifndef __INC_SKDRV1ST_H
 #define __INC_SKDRV1ST_H
 
+/* Check kernel version */
+#include <linux/version.h>
+
 typedef struct s_AC	SK_AC;
 
 /* Set card versions */
@@ -124,17 +137,15 @@ typedef struct s_AC	SK_AC;
 #define SK_PNMI_READ_U32(p,v)		memcpy((char*)&(v),(char*)(p),4)
 #define SK_PNMI_READ_U64(p,v)		memcpy((char*)&(v),(char*)(p),8)
 
-#define SkCsCalculateChecksum(p,l)	((~ip_compute_csum(p, l)) & 0xffff)
-
 #define SK_ADDR_EQUAL(a1,a2)		(!memcmp(a1,a2,6))
 
-
 #if !defined(__OPTIMIZE__)  ||  !defined(__KERNEL__)
 #warning  You must compile this file with the correct options!
 #warning  See the last lines of the source file.
 #error You must compile this driver with "-O".
 #endif
 
+#include <linux/version.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
@@ -154,6 +165,13 @@ typedef struct s_AC	SK_AC;
 #include <asm/uaccess.h>
 #include <net/checksum.h>
 
+#define SK_CS_CALCULATE_CHECKSUM
+#ifndef CONFIG_X86_64
+#define SkCsCalculateChecksum(p,l)	((~ip_compute_csum(p, l)) & 0xffff)
+#else
+#define SkCsCalculateChecksum(p,l)	((~ip_fast_csum(p, l)) & 0xffff)
+#endif
+
 #include	"h/sktypes.h"
 #include	"h/skerror.h"
 #include	"h/skdebug.h"

drivers/net/sk98lin/h/skdrv2nd.h

@@ -2,15 +2,16 @@
  *
  * Name:	skdrv2nd.h
  * Project:	GEnesis, PCI Gigabit Ethernet Adapter
- * Version:	$Revision: 1.3 $
- * Date:	$Date: 2003/08/12 16:51:18 $
+ * Version:	$Revision: 1.10 $
+ * Date:	$Date: 2003/12/11 16:04:45 $
  * Purpose:	Second header file for driver and all other modules
  *
  ******************************************************************************/
 
 /******************************************************************************
  *
- *	(C)Copyright 1998-2003 SysKonnect GmbH.
+ *	(C)Copyright 1998-2002 SysKonnect GmbH.
+ *	(C)Copyright 2002-2003 Marvell.
  *
  *	This program is free software; you can redistribute it and/or modify
  *	it under the terms of the GNU General Public License as published by
@@ -26,6 +27,27 @@
  * History:
  *
  *	$Log: skdrv2nd.h,v $
+ *	Revision 1.10  2003/12/11 16:04:45  mlindner
+ *	Add: New pnmi data backup structure
+ *	
+ *	Revision 1.9  2003/11/10 09:31:37  rroesler
+ *	Add: pnmiBackup structure for DIAG backup restore
+ *	
+ *	Revision 1.8  2003/10/22 14:18:32  rroesler
+ *	Fix: DIAG handling for DualNet cards
+ *	
+ *	Revision 1.7  2003/10/07 09:34:59  mlindner
+ *	Add: New defines for lower and upper range values (interrupt moderation)
+ *	
+ *	Revision 1.6  2003/10/07 08:16:51  mlindner
+ *	Fix: Copyright changes
+ *	
+ *	Revision 1.5  2003/09/01 13:10:39  rroesler
+ *	Add: Prototypes for DIAG Attach/Detach functions
+ *	
+ *	Revision 1.4  2003/09/01 12:33:38  rroesler
+ *	Add: Defines for optimized DIAG interaction
+ *	
  *	Revision 1.3  2003/08/12 16:51:18  mlindner
  *	Fix: UDP and TCP Proto checks
  *	Fix: UDP header offset
@@ -206,6 +228,11 @@ extern int		SkPciWriteCfgWord(SK_AC*, int, SK_U16);
 extern int		SkPciWriteCfgByte(SK_AC*, int, SK_U8);
 extern int		SkDrvEvent(SK_AC*, SK_IOC IoC, SK_U32, SK_EVPARA);
 
+#ifdef SK_DIAG_SUPPORT
+extern int		SkDrvEnterDiagMode(SK_AC *pAc);
+extern int		SkDrvLeaveDiagMode(SK_AC *pAc);
+#endif
+
 struct s_DrvRlmtMbuf {
 	SK_MBUF		*pNext;		/* Pointer to next RLMT Mbuf. */
 	SK_U8		*pData;		/* Data buffer (virtually contig.). */
@@ -247,6 +274,7 @@ struct s_DrvRlmtMbuf {
 #define		SK_IOCTL_SETMIB		(SK_IOCTL_BASE + 1)
 #define		SK_IOCTL_PRESETMIB	(SK_IOCTL_BASE + 2)
 #define		SK_IOCTL_GEN		(SK_IOCTL_BASE + 3)
+#define		SK_IOCTL_DIAG		(SK_IOCTL_BASE + 4)
 
 typedef struct s_IOCTL	SK_GE_IOCTL;
 
@@ -462,6 +490,9 @@ struct s_RxPort {
 #define C_INTS_PER_SEC_DEFAULT      2000 
 #define C_INT_MOD_ENABLE_PERCENTAGE   50 /* if higher 50% enable */
 #define C_INT_MOD_DISABLE_PERCENTAGE  50 /* if lower 50% disable */
+#define C_INT_MOD_IPS_LOWER_RANGE     30
+#define C_INT_MOD_IPS_UPPER_RANGE     40000
+
 
 typedef struct s_DynIrqModInfo  DIM_INFO;
 struct s_DynIrqModInfo {
@@ -493,6 +524,11 @@ typedef struct s_PerStrm	PER_STRM;
 
 #define SK_ALLOC_IRQ	0x00000001
 
+#ifdef SK_DIAG_SUPPORT
+#define	DIAG_ACTIVE		1
+#define	DIAG_NOTACTIVE		0
+#endif
+
 /****************************************************************************
  * Per board structure / Adapter Context structure:
  *	Allocated within attach(9e) and freed within detach(9e).
@@ -563,9 +599,18 @@ struct s_AC  {
 	int		PortUp;
 	int		PortDown;
 	int		ChipsetType;	/*  Chipset family type 
-							 *  0 == Genesis family support
-							 *  1 == Yukon family support
-							 */
+					 *  0 == Genesis family support
+					 *  1 == Yukon family support
+					 */
+#ifdef SK_DIAG_SUPPORT
+	SK_U32		DiagModeActive;		/* is diag active?	*/
+	SK_BOOL		DiagFlowCtrl;		/* for control purposes	*/
+	SK_PNMI_STRUCT_DATA PnmiBackup;		/* backup structure for all Pnmi-Data */
+	SK_BOOL         WasIfUp[SK_MAX_MACS];   /* for OpenClose while 
+						 * DIAG is busy with NIC 
+						 */
+#endif
+
 };
 
 

drivers/net/sk98lin/h/skgehwt.h

 /******************************************************************************
  *
  * Name:	skhwt.h
- * Project:	Gigabit Ethernet Adapters, Schedule-Modul
- * Version:	$Revision: 1.6 $
- * Date:	$Date: 2003/05/13 17:57:48 $
+ * Project:	Gigabit Ethernet Adapters, Event Scheduler Module
+ * Version:	$Revision: 1.7 $
+ * Date:	$Date: 2003/09/16 12:55:08 $
  * Purpose:	Defines for the hardware timer functions
  *
  ******************************************************************************/
@@ -27,6 +27,9 @@
  * History:
  *
  *	$Log: skgehwt.h,v $
+ *	Revision 1.7  2003/09/16 12:55:08  rschmidt
+ *	Editorial changes
+ *	
  *	Revision 1.6  2003/05/13 17:57:48  mkarl
  *	Editorial changes.
  *	
@@ -34,7 +37,7 @@
  *	Changed license header to GPL.
  *	
  *	Revision 1.4  1998/08/19 09:50:58  gklug
- *	fix: remove struct keyword from c-code (see CCC) add typedefs
+ *	fix: remove struct keyword from C-code (see CCC) add typedefs
  *	
  *	Revision 1.3  1998/08/14 07:09:29  gklug
  *	fix: chg pAc -> pAC
@@ -44,10 +47,6 @@
  *	
  *	Revision 1.1  1998/08/07 09:32:58  gklug
  *	first version
- *	
- *	
- *	
- *	
  *
  ******************************************************************************/
 
@@ -64,14 +63,14 @@
  * - use in Adapters context name pAC->Hwt
  */
 typedef	struct s_Hwt {
-	SK_U32		TStart ;	/* HWT start */
-	SK_U32		TStop ;		/* HWT stop */
-	int		TActive ;	/* HWT: flag : active/inactive */
+	SK_U32		TStart;	/* HWT start */
+	SK_U32		TStop;	/* HWT stop */
+	int		TActive;	/* HWT: flag : active/inactive */
 } SK_HWT;
 
 extern void SkHwtInit(SK_AC *pAC, SK_IOC Ioc);
 extern void SkHwtStart(SK_AC *pAC, SK_IOC Ioc, SK_U32 Time);
 extern void SkHwtStop(SK_AC *pAC, SK_IOC Ioc);
-extern SK_U32 SkHwtRead(SK_AC *pAC,SK_IOC Ioc);
+extern SK_U32 SkHwtRead(SK_AC *pAC, SK_IOC Ioc);
 extern void SkHwtIsr(SK_AC *pAC, SK_IOC Ioc);
 #endif	/* _SKGEHWT_H_ */

drivers/net/sk98lin/h/skgei2c.h

 /******************************************************************************
  *
  * Name:	skgei2c.h
- * Project:	GEnesis, PCI Gigabit Ethernet Adapter
- * Version:	$Revision: 1.23 $
- * Date:	$Date: 2002/12/19 14:34:27 $
- * Purpose:	Special GEnesis defines for TWSI
+ * Project:	Gigabit Ethernet Adapters, TWSI-Module
+ * Version:	$Revision: 1.25 $
+ * Date:	$Date: 2003/10/20 09:06:05 $
+ * Purpose:	Special defines for TWSI
  *
  ******************************************************************************/
 
 /******************************************************************************
  *
- *	(C)Copyright 1998-2002 SysKonnect GmbH.
+ *	(C)Copyright 1998-2002 SysKonnect.
+ *	(C)Copyright 2002-2003 Marvell.
  *
  *	This program is free software; you can redistribute it and/or modify
  *	it under the terms of the GNU General Public License as published by
@@ -26,6 +27,12 @@
  * History:
  *
  *	$Log: skgei2c.h,v $
+ *	Revision 1.25  2003/10/20 09:06:05  rschmidt
+ *	Editorial changes.
+ *	
+ *	Revision 1.24  2003/09/23 09:31:15  malthoff
+ *	Parameter dev_size added to macro definition of SK_I2C_CTL.
+ *	
  *	Revision 1.23  2002/12/19 14:34:27  rschmidt
  *	Added cast in macros SK_I2C_SET_BIT() and SK_I2C_CLR_BIT()
  *	Editorial changes (TWSI)
@@ -107,8 +114,6 @@
  *	Revision 1.1  1998/07/17 11:27:56  gklug
  *	Created.
  *
- *
- *
  ******************************************************************************/
 
 /*
@@ -121,12 +126,13 @@
 /*
  * Macros to access the B2_I2C_CTRL
  */
-#define SK_I2C_CTL(IoC, flag, dev, reg, burst) \
+#define SK_I2C_CTL(IoC, flag, dev, dev_size, reg, burst) \
 	SK_OUT32(IoC, B2_I2C_CTRL,\
 		(flag ? 0x80000000UL : 0x0L) | \
-		(((SK_U32) reg << 16) & I2C_ADDR) | \
-		(((SK_U32) dev << 9) & I2C_DEV_SEL) | \
-		(( burst << 4) & I2C_BURST_LEN))
+		(((SK_U32)reg << 16) & I2C_ADDR) | \
+		(((SK_U32)dev << 9) & I2C_DEV_SEL) | \
+		(dev_size & I2C_DEV_SIZE) | \
+		((burst << 4) & I2C_BURST_LEN))
 
 #define SK_I2C_STOP(IoC) {				\
 	SK_U32	I2cCtrl;				\
@@ -166,42 +172,42 @@
  */
 #define	SK_LM80_VT_LSB		22	/* 22mV LSB resolution */
 #define	SK_LM80_TEMP_LSB	10	/* 1 degree LSB resolution */
-#define	SK_LM80_TEMPEXT_LSB	5	/* 0.5 degree LSB resolution for the
-					 * extension value
-					 */
-#define SK_LM80_FAN_FAKTOR	((22500L*60)/(1*2))
-/* formula: counter = (22500*60)/(rpm * divisor * pulses/2)
+#define	SK_LM80_TEMPEXT_LSB	 5	/* 0.5 degree LSB resolution for ext. val. */
+
+/*
+ * formula: counter = (22500*60)/(rpm * divisor * pulses/2)
  * assuming: 6500rpm, 4 pulses, divisor 1
  */
+#define SK_LM80_FAN_FAKTOR	((22500L*60)/(1*2))
 
 /*
  * Define sensor management data
- * Maximum is reached on copperfield with dual Broadcom.
+ * Maximum is reached on Genesis copper dual port and Yukon-64
  * Board specific maximum is in pAC->I2c.MaxSens
  */
 #define	SK_MAX_SENSORS	8	/* maximal no. of installed sensors */
 #define	SK_MIN_SENSORS	5	/* minimal no. of installed sensors */
 
 /*
- * To watch the statemachine (JS) use the timer in two ways instead of one as hitherto
+ * To watch the state machine (SM) use the timer in two ways
+ * instead of one as hitherto
  */
-#define	SK_TIMER_WATCH_STATEMACHINE	0	/* Watch the statemachine to finish in a specific time */
-#define	SK_TIMER_NEW_GAUGING    	1	/* Start a new gauging when timer expires */
-
+#define	SK_TIMER_WATCH_SM		0	/* Watch the SM to finish in a spec. time */
+#define	SK_TIMER_NEW_GAUGING	1	/* Start a new gauging when timer expires */
 
 /*
- * Defines for the individual Thresholds
+ * Defines for the individual thresholds
  */
 
 /* Temperature sensor */
-#define	SK_SEN_TEMP_HIGH_ERR    800	/* Temperature High Err  Threshold */
+#define	SK_SEN_TEMP_HIGH_ERR	800	/* Temperature High Err  Threshold */
 #define	SK_SEN_TEMP_HIGH_WARN	700	/* Temperature High Warn Threshold */
 #define	SK_SEN_TEMP_LOW_WARN	100	/* Temperature Low  Warn Threshold */
-#define	SK_SEN_TEMP_LOW_ERR       0	/* Temperature Low  Err  Threshold */
+#define	SK_SEN_TEMP_LOW_ERR		  0	/* Temperature Low  Err  Threshold */
 
 /* VCC which should be 5 V */
-#define	SK_SEN_PCI_5V_HIGH_ERR  	5588	/* Voltage PCI High Err  Threshold */
-#define	SK_SEN_PCI_5V_HIGH_WARN     5346	/* Voltage PCI High Warn Threshold */
+#define	SK_SEN_PCI_5V_HIGH_ERR		5588	/* Voltage PCI High Err  Threshold */
+#define	SK_SEN_PCI_5V_HIGH_WARN		5346	/* Voltage PCI High Warn Threshold */
 #define	SK_SEN_PCI_5V_LOW_WARN		4664	/* Voltage PCI Low  Warn Threshold */
 #define	SK_SEN_PCI_5V_LOW_ERR		4422	/* Voltage PCI Low  Err  Threshold */
 
@@ -229,17 +235,16 @@
 #define	SK_SEN_PCI_IO_3V3_HIGH_ERR	3850	/* + 15% V PCI-IO High Err Threshold */
 #define	SK_SEN_PCI_IO_3V3_HIGH_WARN	3674	/* + 10% V PCI-IO High Warn Threshold */
 					/*		3300	mVolt */
-#define	SK_SEN_PCI_IO_3V3_LOW_WARN  2926	/* - 10% V PCI-IO Low Warn Threshold */
-#define	SK_SEN_PCI_IO_3V3_LOW_ERR   2772	/* - 15% V PCI-IO Low Err  Threshold */
-
+#define	SK_SEN_PCI_IO_3V3_LOW_WARN	2926	/* - 10% V PCI-IO Low Warn Threshold */
+#define	SK_SEN_PCI_IO_3V3_LOW_ERR	2772	/* - 15% V PCI-IO Low Err  Threshold */
 
 /*
  * VDD voltage
  */
-#define	SK_SEN_VDD_HIGH_ERR	    3630	/* Voltage ASIC High Err  Threshold */
-#define	SK_SEN_VDD_HIGH_WARN    3476	/* Voltage ASIC High Warn Threshold */
-#define	SK_SEN_VDD_LOW_WARN     3146	/* Voltage ASIC Low  Warn Threshold */
-#define	SK_SEN_VDD_LOW_ERR      2970	/* Voltage ASIC Low  Err  Threshold */
+#define	SK_SEN_VDD_HIGH_ERR		3630	/* Voltage ASIC High Err  Threshold */
+#define	SK_SEN_VDD_HIGH_WARN	3476	/* Voltage ASIC High Warn Threshold */
+#define	SK_SEN_VDD_LOW_WARN		3146	/* Voltage ASIC Low  Warn Threshold */
+#define	SK_SEN_VDD_LOW_ERR		2970	/* Voltage ASIC Low  Err  Threshold */
 
 /*
  * PHY PLL 3V3 voltage
@@ -255,8 +260,8 @@
 #define	SK_SEN_VAUX_3V3_HIGH_ERR	3630	/* Voltage VAUX High Err Threshold */
 #define	SK_SEN_VAUX_3V3_HIGH_WARN	3476	/* Voltage VAUX High Warn Threshold */
 #define	SK_SEN_VAUX_3V3_LOW_WARN	3146	/* Voltage VAUX Low Warn Threshold */
-#define	SK_SEN_VAUX_3V3_LOW_ERR	    2970	/* Voltage VAUX Low Err Threshold */
-#define	SK_SEN_VAUX_0V_WARN_ERR	       0	/* if VAUX not present */
+#define	SK_SEN_VAUX_3V3_LOW_ERR		2970	/* Voltage VAUX Low Err Threshold */
+#define	SK_SEN_VAUX_0V_WARN_ERR		   0	/* if VAUX not present */
 #define	SK_SEN_VAUX_RANGE_LIMITER	1000	/* 1000 mV range delimiter */
 
 /*
@@ -270,7 +275,7 @@
 /*
  * ASIC Core 1V5 voltage (YUKON only)
  */
-#define	SK_SEN_CORE_1V5_HIGH_ERR    1650	/* Voltage ASIC Core High Err Threshold */
+#define	SK_SEN_CORE_1V5_HIGH_ERR	1650	/* Voltage ASIC Core High Err Threshold */
 #define	SK_SEN_CORE_1V5_HIGH_WARN	1575	/* Voltage ASIC Core High Warn Threshold */
 #define	SK_SEN_CORE_1V5_LOW_WARN	1425	/* Voltage ASIC Core Low Warn Threshold */
 #define	SK_SEN_CORE_1V5_LOW_ERR 	1350	/* Voltage ASIC Core Low Err Threshold */
@@ -285,8 +290,8 @@
  */
 #define	SK_SEN_FAN_HIGH_ERR		20000	/* FAN Speed High Err Threshold */
 #define	SK_SEN_FAN_HIGH_WARN	20000	/* FAN Speed High Warn Threshold */
-#define	SK_SEN_FAN_LOW_WARN 	5200	/* FAN Speed Low Warn Threshold */
-#define	SK_SEN_FAN_LOW_ERR		4550	/* FAN Speed Low Err Threshold */
+#define	SK_SEN_FAN_LOW_WARN		 5200	/* FAN Speed Low Warn Threshold */
+#define	SK_SEN_FAN_LOW_ERR		 4550	/* FAN Speed Low Err Threshold */
 
 /*
  * Some Voltages need dynamic thresholds

drivers/net/sk98lin/h/skgeinit.h

@@ -2,8 +2,8 @@
  *
  * Name:	skgeinit.h
  * Project:	Gigabit Ethernet Adapters, Common Modules
- * Version:	$Revision: 1.81 $
- * Date:	$Date: 2003/07/04 12:30:38 $
+ * Version:	$Revision: 1.83 $
+ * Date:	$Date: 2003/09/16 14:07:37 $
  * Purpose:	Structures and prototypes for the GE Init Module
  *
  ******************************************************************************/
@@ -27,6 +27,23 @@
  * History:
  *
  *	$Log: skgeinit.h,v $
+ *	Revision 1.83  2003/09/16 14:07:37  rschmidt
+ *	Moved defines for PHY power down modes from skgehw.h
+ *	Added prototypes for SkMacClearRst()
+ *	Editorial changes
+ *	
+ *	Revision 1.82  2003/09/16 07:18:36  mschmid
+ *	Added members to port structure for MAC control
+ *	- PMacColThres
+ *	- PMacJamLen
+ *	- PMacJamIpgVal
+ *	- PMacJamIpgData
+ *	- PMacIpgData
+ *	- PMacLimit4
+ *	Added PHY power state to port structure
+ *	- PPhyPowerState
+ *	Added function prototypes to enter and leave low power modes
+ *	
  *	Revision 1.81  2003/07/04 12:30:38  rschmidt
  *	Added SK_FAR to pointers in MAC statistic functions (for PXE)
  *	Editorial changes
@@ -594,6 +611,13 @@ extern "C" {
 #define SK_PRT_INIT		2	/* the port is initialized */
 #define SK_PRT_RUN		3	/* the port has an active link */
 
+/* PHY power down modes */
+#define PHY_PM_OPERATIONAL_MODE		0	/* PHY operational mode */
+#define PHY_PM_DEEP_SLEEP			1	/* coma mode --> minimal power */
+#define PHY_PM_IEEE_POWER_DOWN		2	/* IEEE 22.2.4.1.5 compl. power down */
+#define PHY_PM_ENERGY_DETECT		3	/* energy detect */
+#define PHY_PM_ENERGY_DETECT_PLUS	4	/* energy detect plus */
+
 /* Default receive frame limit for Workaround of XMAC Errata */
 #define SK_DEF_RX_WA_LIM	SK_CONSTU64(100)
 
@@ -685,6 +709,13 @@ typedef	struct s_GePort {
 	SK_U8	PCableLen;		/* Cable Length */
 	SK_U8	PMdiPairLen[4];	/* MDI[0..3] Pair Length */
 	SK_U8	PMdiPairSts[4];	/* MDI[0..3] Pair Diagnostic Status */
+	SK_U8	PPhyPowerState;	/* PHY current power state */
+	int		PMacColThres;	/* MAC Collision Threshold */
+	int		PMacJamLen;		/* MAC Jam length */
+	int		PMacJamIpgVal;	/* MAC Jam IPG */
+	int		PMacJamIpgData;	/* MAC IPG Jam to Data */
+	int		PMacIpgData;	/* MAC Data IPG */
+	SK_BOOL PMacLimit4;		/* reset collision counter and backoff algorithm */
 } SK_GEPORT;
 
 /*
@@ -865,6 +896,11 @@ extern void	SkMacHardRst(
 	SK_IOC	IoC,
 	int		Port);
 
+extern void	SkMacClearRst(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port);
+
 extern void	SkXmInitMac(
 	SK_AC	*pAC,
 	SK_IOC	IoC,
@@ -1040,6 +1076,17 @@ extern int SkGmCableDiagStatus(
 	int		Port,
 	SK_BOOL	StartTest);
 
+extern int SkGmEnterLowPowerMode(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	SK_U8	Mode);
+
+extern int SkGmLeaveLowPowerMode(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port);
+
 #ifdef SK_DIAG
 extern void	SkGePhyRead(
 	SK_AC	*pAC,
@@ -1101,6 +1148,7 @@ extern int	SkGeInitAssignRamToQueues();
 extern void SkMacRxTxDisable();
 extern void	SkMacSoftRst();
 extern void	SkMacHardRst();
+extern void	SkMacClearRst();
 extern void SkMacInitPhy();
 extern int  SkMacRxTxEnable();
 extern void SkMacPromiscMode();
@@ -1131,6 +1179,8 @@ extern int	SkGmResetCounter();
 extern int	SkXmOverflowStatus();
 extern int	SkGmOverflowStatus();
 extern int	SkGmCableDiagStatus();
+extern int	SkGmEnterLowPowerMode();
+extern int	SkGmLeaveLowPowerMode();
 
 #ifdef SK_DIAG
 extern void	SkGePhyRead();

drivers/net/sk98lin/h/skgepnmi.h

@@ -2,8 +2,8 @@
  *
  * Name:	skgepnmi.h
  * Project:	GEnesis, PCI Gigabit Ethernet Adapter
- * Version:	$Revision: 1.61 $
- * Date:	$Date: 2003/05/23 12:53:52 $
+ * Version:	$Revision: 1.62 $
+ * Date:	$Date: 2003/08/15 12:31:52 $
  * Purpose:	Defines for Private Network Management Interface
  *
  ****************************************************************************/
@@ -27,6 +27,18 @@
  * History:
  *
  *	$Log: skgepnmi.h,v $
+ *	Revision 1.62  2003/08/15 12:31:52  tschilli
+ *	Added new OIDs:
+ *	OID_SKGE_DRIVER_RELDATE
+ *	OID_SKGE_DRIVER_FILENAME
+ *	OID_SKGE_CHIPID
+ *	OID_SKGE_RAMSIZE
+ *	OID_SKGE_VAUXAVAIL
+ *	OID_SKGE_PHY_TYPE
+ *	OID_SKGE_PHY_LP_MODE
+ *	
+ *	Added new define SK_DIAG_ATTACHED for OID_SKGE_DIAG_MODE handling.
+ *	
  *	Revision 1.61  2003/05/23 12:53:52  tschilli
  *	Generic PNMI IOCTL subcommands added.
  *	Function prototype SkPnmiGenIoctl() added.
@@ -568,15 +580,23 @@
 #define OID_SKGE_ALL_DATA				0xFF020190
 
 /* Defines for VCT. */
-#define OID_SKGE_VCT_GET			0xFF020200
-#define OID_SKGE_VCT_SET			0xFF020201
-#define OID_SKGE_VCT_STATUS			0xFF020202
+#define OID_SKGE_VCT_GET				0xFF020200
+#define OID_SKGE_VCT_SET				0xFF020201
+#define OID_SKGE_VCT_STATUS				0xFF020202
 
 #ifdef SK_DIAG_SUPPORT
 /* Defines for driver DIAG mode. */
-#define OID_SKGE_DIAG_MODE			0xFF020204
+#define OID_SKGE_DIAG_MODE				0xFF020204
 #endif /* SK_DIAG_SUPPORT */
 
+/* New OIDs */
+#define OID_SKGE_DRIVER_RELDATE			0xFF020210
+#define OID_SKGE_DRIVER_FILENAME		0xFF020211
+#define OID_SKGE_CHIPID					0xFF020212
+#define OID_SKGE_RAMSIZE				0xFF020213
+#define OID_SKGE_VAUXAVAIL				0xFF020214
+#define OID_SKGE_PHY_TYPE				0xFF020215
+#define OID_SKGE_PHY_LP_MODE			0xFF020216
 
 /* VCT struct to store a backup copy of VCT data after a port reset. */
 typedef struct s_PnmiVct {
@@ -613,6 +633,12 @@ typedef struct s_PnmiVct {
 #define OID_SKGE_TRAP_RLMT_PORT_UP		523
 #define OID_SKGE_TRAP_RLMT_SEGMENTATION	524
 
+#ifdef SK_DIAG_SUPPORT
+/* Defines for driver DIAG mode. */
+#define SK_DIAG_ATTACHED	2
+#define SK_DIAG_RUNNING		1
+#define SK_DIAG_IDLE		0
+#endif /* SK_DIAG_SUPPORT */
 
 /*
  * Generic PNMI IOCTL subcommand definitions.
@@ -730,6 +756,14 @@ typedef struct s_PnmiVct {
 #define SK_PNMI_ERR051MSG	"SkPnmiEvent: Port switch suspicious"
 #define SK_PNMI_ERR052		(SK_ERRBASE_PNMI + 52)
 #define SK_PNMI_ERR052MSG	""
+#define SK_PNMI_ERR053		(SK_ERRBASE_PNMI + 53)
+#define SK_PNMI_ERR053MSG	"General: Driver release date not initialized"
+#define SK_PNMI_ERR054		(SK_ERRBASE_PNMI + 54)
+#define SK_PNMI_ERR054MSG	"General: Driver release date string too long"
+#define SK_PNMI_ERR055		(SK_ERRBASE_PNMI + 55)
+#define SK_PNMI_ERR055MSG	"General: Driver file name not initialized"
+#define SK_PNMI_ERR056		(SK_ERRBASE_PNMI + 56)
+#define SK_PNMI_ERR056MSG	"General: Driver file name string too long"
 
 /*
  * Management counter macros called by the driver
@@ -740,6 +774,11 @@ typedef struct s_PnmiVct {
 #define SK_PNMI_SET_DRIVER_VER(pAC,v)	((pAC)->Pnmi.pDriverVersion = \
 	(char *)(v))
 
+#define SK_PNMI_SET_DRIVER_RELDATE(pAC,v)	((pAC)->Pnmi.pDriverReleaseDate = \
+	(char *)(v))
+
+#define SK_PNMI_SET_DRIVER_FILENAME(pAC,v)	((pAC)->Pnmi.pDriverFileName = \
+	(char *)(v))
 
 #define SK_PNMI_CNT_TX_QUEUE_LEN(pAC,v,p) \
 	{ \
@@ -916,6 +955,8 @@ typedef struct s_PnmiConf {
 	char			ConfMacFactoryAddr[6];
 	SK_U8			ConfPMD;
 	SK_U8			ConfConnector;
+	SK_U32			ConfPhyType;
+	SK_U32			ConfPhyMode;
 	SK_U8			ConfLinkCapability;
 	SK_U8			ConfLinkMode;
 	SK_U8			ConfLinkModeStatus;
@@ -964,9 +1005,14 @@ typedef struct s_PnmiStrucData {
 	SK_U32			DeviceType;
 	char			DriverDescr[SK_PNMI_STRINGLEN1];
 	char			DriverVersion[SK_PNMI_STRINGLEN2];
+	char			DriverReleaseDate[SK_PNMI_STRINGLEN1];
+	char			DriverFileName[SK_PNMI_STRINGLEN1];
 	char			HwDescr[SK_PNMI_STRINGLEN1];
 	char			HwVersion[SK_PNMI_STRINGLEN2];
 	SK_U16			Chipset;
+	SK_U32			ChipId;
+	SK_U8			VauxAvail;
+	SK_U32			RamSize;
 	SK_U32			MtuSize;
 	SK_U32			Action;
 	SK_U32			TestResult;
@@ -1090,6 +1136,8 @@ typedef struct s_PnmiData {
 
 	char			*pDriverDescription;
 	char			*pDriverVersion;
+	char			*pDriverReleaseDate;
+	char			*pDriverFileName;
 
 	int				MacUpdatedFlag;
 	int				RlmtUpdatedFlag;
@@ -1119,6 +1167,9 @@ typedef struct s_PnmiData {
 	SK_U8		VctStatus[SK_MAX_MACS];
 	SK_PNMI_VCT	VctBackup[SK_MAX_MACS];
 	SK_PNMI_VCT_TIMER VctTimeout[SK_MAX_MACS];
+#ifdef SK_DIAG_SUPPORT
+	SK_U32			DiagAttached;
+#endif /* SK_DIAG_SUPPORT */
 } SK_PNMI;
 
 

drivers/net/sk98lin/h/ski2c.h

 /******************************************************************************
  *
  * Name:	ski2c.h
- * Project:	GEnesis, PCI Gigabit Ethernet Adapter
- * Version:	$Revision: 1.34 $
- * Date:	$Date: 2003/01/28 09:11:21 $
+ * Project:	Gigabit Ethernet Adapters, TWSI-Module
+ * Version:	$Revision: 1.35 $
+ * Date:	$Date: 2003/10/20 09:06:30 $
  * Purpose:	Defines to access Voltage and Temperature Sensor
  *
  ******************************************************************************/
 
 /******************************************************************************
  *
- *	(C)Copyright 1998-2003 SysKonnect GmbH.
+ *	(C)Copyright 1998-2002 SysKonnect.
+ *	(C)Copyright 2002-2003 Marvell.
  *
  *	This program is free software; you can redistribute it and/or modify
  *	it under the terms of the GNU General Public License as published by
@@ -26,6 +27,10 @@
  * History:
  *
  *	$Log: ski2c.h,v $
+ *	Revision 1.35  2003/10/20 09:06:30  rschmidt
+ *	Added prototypes for SkI2cRead() and SkI2cWrite().
+ *	Editorial changes.
+ *	
  *	Revision 1.34  2003/01/28 09:11:21  rschmidt
  *	Editorial changes
  *	
@@ -137,7 +142,6 @@
  *	Revision 1.1  1998/06/19 14:30:10  malthoff
  *	Created. Sources taken from ML Project.
  *
- *
  ******************************************************************************/
 
 /*
@@ -252,7 +256,7 @@ struct	s_Sensor {
 	SK_I32	SenThreWarnLow;		/* Lower warning Threshold of the sensor */
 	int		SenErrFlag;			/* Sensor indicated an error */
 	SK_BOOL	SenInit;			/* Is sensor initialized ? */
-	SK_U64	SenErrCts;			/* Error  trap counter */
+	SK_U64	SenErrCts;			/* Error trap counter */
 	SK_U64	SenWarnCts;			/* Warning trap counter */
 	SK_U64	SenBegErrTS;		/* Begin error timestamp */
 	SK_U64	SenBegWarnTS;		/* Begin warning timestamp */
@@ -279,13 +283,17 @@ typedef	struct	s_I2c {
 #endif /* !SK_DIAG */
 } SK_I2C;
 
+extern int SkI2cInit(SK_AC *pAC, SK_IOC IoC, int Level);
+extern int SkI2cWrite(SK_AC *pAC, SK_IOC IoC, SK_U32 Data, int Dev, int Size,
+					   int Reg, int Burst);
 extern int SkI2cReadSensor(SK_AC *pAC, SK_IOC IoC, SK_SENSOR *pSen);
-#ifndef SK_DIAG
+#ifdef SK_DIAG
+extern	SK_U32 SkI2cRead(SK_AC *pAC, SK_IOC IoC, int Dev, int Size, int Reg,
+						 int Burst);
+#else /* !SK_DIAG */
 extern int SkI2cEvent(SK_AC *pAC, SK_IOC IoC, SK_U32 Event, SK_EVPARA Para);
-extern int SkI2cInit(SK_AC *pAC, SK_IOC IoC, int Level);
 extern void SkI2cWaitIrq(SK_AC *pAC, SK_IOC IoC);
 extern void SkI2cIsr(SK_AC *pAC, SK_IOC IoC);
-
-#endif
+#endif /* !SK_DIAG */
 #endif /* n_SKI2C_H */
 

drivers/net/sk98lin/h/skqueue.h

 /******************************************************************************
  *
  * Name:	skqueue.h
- * Project:	Gigabit Ethernet Adapters, Schedule-Modul
- * Version:	$Revision: 1.15 $
- * Date:	$Date: 2003/05/13 17:54:57 $
+ * Project:	Gigabit Ethernet Adapters, Event Scheduler Module
+ * Version:	$Revision: 1.16 $
+ * Date:	$Date: 2003/09/16 12:50:32 $
  * Purpose:	Defines for the Event queue
  *
  ******************************************************************************/
@@ -27,6 +27,9 @@
  * History:
  *
  *	$Log: skqueue.h,v $
+ *	Revision 1.16  2003/09/16 12:50:32  rschmidt
+ *	Editorial changes
+ *	
  *	Revision 1.15  2003/05/13 17:54:57  mkarl
  *	Editorial changes.
  *	
@@ -47,7 +50,7 @@
  *	add: typedef SK_QUEUE
  *	
  *	Revision 1.9  1998/08/19 09:50:59  gklug
- *	fix: remove struct keyword from c-code (see CCC) add typedefs
+ *	fix: remove struct keyword from C-code (see CCC) add typedefs
  *	
  *	Revision 1.8  1998/08/18 07:00:01  gklug
  *	fix: SK_PTR not defined use void * instead.
@@ -74,8 +77,6 @@
  *	Revision 1.1  1998/07/30 14:52:12  gklug
  *	Initial version.
  *	Defines Event Classes, Event structs and queue management variables.
- *	
- *	
  *
  ******************************************************************************/
 
@@ -92,7 +93,7 @@
  */
 #define	SKGE_DRV	1	/* Driver Event Class */
 #define	SKGE_RLMT	2	/* RLMT Event Class */
-#define	SKGE_I2C	3	/* i2C Event Class */
+#define	SKGE_I2C	3	/* I2C Event Class */
 #define	SKGE_PNMI	4	/* PNMI Event Class */
 #define	SKGE_CSUM	5	/* Checksum Event Class */
 #define	SKGE_HWAC	6	/* Hardware Access Event Class */
@@ -121,25 +122,25 @@ typedef	union u_EvPara {
  * Event Queue
  *	skqueue.c
  * events are class/value pairs
- *	class	is addressee, e.g. RMT, PCM etc.
+ *	class	is addressee, e.g. RLMT, PNMI etc.
  *	value	is command, e.g. line state change, ring op change etc.
  */
 typedef	struct s_EventElem {
-	SK_U32		Class ;			/* Event class */
-	SK_U32		Event ;			/* Event value */
-	SK_EVPARA	Para ;			/* Event parameter */
+	SK_U32		Class;			/* Event class */
+	SK_U32		Event;			/* Event value */
+	SK_EVPARA	Para;			/* Event parameter */
 } SK_EVENTELEM;
 
 typedef	struct s_Queue {
 	SK_EVENTELEM	EvQueue[SK_MAX_EVENT];
-	SK_EVENTELEM	*EvPut ;
-	SK_EVENTELEM	*EvGet ;
+	SK_EVENTELEM	*EvPut;
+	SK_EVENTELEM	*EvGet;
 } SK_QUEUE;
 
 extern	void SkEventInit(SK_AC *pAC, SK_IOC Ioc, int Level);
 extern	void SkEventQueue(SK_AC *pAC, SK_U32 Class, SK_U32 Event,
 	SK_EVPARA Para);
-extern	int SkEventDispatcher(SK_AC *pAC,SK_IOC Ioc);
+extern	int SkEventDispatcher(SK_AC *pAC, SK_IOC Ioc);
 
 
 /* Define Error Numbers and messages */

drivers/net/sk98lin/h/sktimer.h

 /******************************************************************************
  *
  * Name:	sktimer.h
- * Project:	Gigabit Ethernet Adapters, Schedule-Modul
- * Version:	$Revision: 1.10 $
- * Date:	$Date: 2003/05/13 17:56:44 $
+ * Project:	Gigabit Ethernet Adapters, Event Scheduler Module
+ * Version:	$Revision: 1.11 $
+ * Date:	$Date: 2003/09/16 12:58:18 $
  * Purpose:	Defines for the timer functions
  *
  ******************************************************************************/
@@ -27,6 +27,9 @@
  * History:
  *
  *	$Log: sktimer.h,v $
+ *	Revision 1.11  2003/09/16 12:58:18  rschmidt
+ *	Editorial changes
+ *	
  *	Revision 1.10  2003/05/13 17:56:44  mkarl
  *	Editorial changes.
  *	
@@ -40,7 +43,7 @@
  *	fix: SK_TIMCTRL needs to be defined
  *	
  *	Revision 1.6  1998/08/19 09:51:00  gklug
- *	fix: remove struct keyword from c-code (see CCC) add typedefs
+ *	fix: remove struct keyword from C-code (see CCC) add typedefs
  *	
  *	Revision 1.5  1998/08/17 13:43:21  gklug
  *	chg: Parameter will be union of 64bit para, 2 times SK_U32 or SK_PTR
@@ -78,25 +81,25 @@
 typedef	struct s_Timer SK_TIMER;
 
 struct s_Timer {
-	SK_TIMER	*TmNext ;	/* linked list */
-	SK_U32		TmClass ;	/* Timer Event class */
-	SK_U32		TmEvent ;	/* Timer Event value */
-	SK_EVPARA	TmPara ;	/* Timer Event parameter */
-	SK_U32		TmDelta ;	/* delta time */
-	int		TmActive ;	/* flag : active/inactive */
-} ;
+	SK_TIMER	*TmNext;	/* linked list */
+	SK_U32		TmClass;	/* Timer Event class */
+	SK_U32		TmEvent;	/* Timer Event value */
+	SK_EVPARA	TmPara;		/* Timer Event parameter */
+	SK_U32		TmDelta;	/* delta time */
+	int			TmActive;	/* flag: active/inactive */
+};
 
 /*
  * Timer control struct.
  * - use in Adapters context name pAC->Tim
  */
 typedef	struct s_TimCtrl {
-	SK_TIMER	*StQueue ;	/* Head of Timer queue */
-} SK_TIMCTRL ;
+	SK_TIMER	*StQueue;	/* Head of Timer queue */
+} SK_TIMCTRL;
 
-extern void SkTimerInit(SK_AC *pAC,SK_IOC Ioc, int Level);
-extern void SkTimerStop(SK_AC *pAC,SK_IOC Ioc,SK_TIMER *pTimer);
-extern void SkTimerStart(SK_AC *pAC,SK_IOC Ioc,SK_TIMER *pTimer,
-	SK_U32 Time,SK_U32 Class,SK_U32 Event,SK_EVPARA Para);
-extern void SkTimerDone(SK_AC *pAC,SK_IOC Ioc);
+extern void SkTimerInit(SK_AC *pAC, SK_IOC Ioc, int Level);
+extern void SkTimerStop(SK_AC *pAC, SK_IOC Ioc, SK_TIMER *pTimer);
+extern void SkTimerStart(SK_AC *pAC, SK_IOC Ioc, SK_TIMER *pTimer,
+	SK_U32 Time, SK_U32 Class, SK_U32 Event, SK_EVPARA Para);
+extern void SkTimerDone(SK_AC *pAC, SK_IOC Ioc);
 #endif	/* _SKTIMER_H_ */

drivers/net/sk98lin/h/sktypes.h

@@ -2,15 +2,16 @@
  *
  * Name:	sktypes.h
  * Project:	GEnesis, PCI Gigabit Ethernet Adapter
- * Version:	$Revision: 1.1 $
- * Date:	$Date: 2003/07/21 07:26:01 $
+ * Version:	$Revision: 1.2 $
+ * Date:	$Date: 2003/10/07 08:16:51 $
  * Purpose:	Define data types for Linux
  *
  ******************************************************************************/
 
 /******************************************************************************
  *
- *	(C)Copyright 1998-2003 SysKonnect GmbH.
+ *	(C)Copyright 1998-2002 SysKonnect GmbH.
+ *	(C)Copyright 2002-2003 Marvell.
  *
  *	This program is free software; you can redistribute it and/or modify
  *	it under the terms of the GNU General Public License as published by
@@ -26,6 +27,9 @@
  * History:
  *
  *	$Log: sktypes.h,v $
+ *	Revision 1.2  2003/10/07 08:16:51  mlindner
+ *	Fix: Copyright changes
+ *	
  *	Revision 1.1  2003/07/21 07:26:01  rroesler
  *	Fix: Re-Enter after CVS crash
  *	

drivers/net/sk98lin/h/skversion.h

@@ -2,15 +2,16 @@
  *
  * Name:	version.h
  * Project:	GEnesis, PCI Gigabit Ethernet Adapter
- * Version:	$Revision: 1.3 $
- * Date:	$Date: 2003/08/25 13:34:48 $
+ * Version:	$Revision: 1.5 $
+ * Date:	$Date: 2003/10/07 08:16:51 $
  * Purpose:	SK specific Error log support
  *
  ******************************************************************************/
 
 /******************************************************************************
  *
- *	(C)Copyright 1998-2003 SysKonnect GmbH.
+ *	(C)Copyright 1998-2002 SysKonnect GmbH.
+ *	(C)Copyright 2002-2003 Marvell.
  *
  *	This program is free software; you can redistribute it and/or modify
  *	it under the terms of the GNU General Public License as published by
@@ -25,6 +26,12 @@
  *
  * History:
  *	$Log: skversion.h,v $
+ *	Revision 1.5  2003/10/07 08:16:51  mlindner
+ *	Fix: Copyright changes
+ *	
+ *	Revision 1.4  2003/09/22 08:40:10  mlindner
+ *	Add: Added DRIVER_FILE_NAME and DRIVER_REL_DATE
+ *	
  *	Revision 1.3  2003/08/25 13:34:48  mlindner
  *	Fix: Lint changes
  *	
@@ -54,12 +61,14 @@
 #ifdef	lint
 static const char SysKonnectFileId[] = "@(#) (C) SysKonnect GmbH.";
 static const char SysKonnectBuildNumber[] =
-	"@(#)SK-BUILD: 6.18 PL: 01"; 
+	"@(#)SK-BUILD: 6.21 PL: 01"; 
 #endif	/* !defined(lint) */
 
-#define BOOT_STRING	"sk98lin: Network Device Driver v6.18\n" \
+#define BOOT_STRING	"sk98lin: Network Device Driver v6.21\n" \
 			"(C)Copyright 1999-2003 Marvell(R)."
 
-#define VER_STRING	"6.18"
+#define VER_STRING	"6.21"
+#define DRIVER_FILE_NAME	"sk98lin"
+#define DRIVER_REL_DATE		"Dec-15-2003"
 
 

drivers/net/sk98lin/skcsum.c

@@ -2,8 +2,8 @@
  *
  * Name:	skcsum.c
  * Project:	GEnesis, PCI Gigabit Ethernet Adapter
- * Version:	$Revision: 1.11 $
- * Date:	$Date: 2003/03/11 14:05:55 $
+ * Version:	$Revision: 1.12 $
+ * Date:	$Date: 2003/08/20 13:55:53 $
  * Purpose:	Store/verify Internet checksum in send/receive packets.
  *
  ******************************************************************************/
@@ -26,6 +26,10 @@
  * History:
  *
  *	$Log: skcsum.c,v $
+ *	Revision 1.12  2003/08/20 13:55:53  mschmid
+ *	Changed notation of #ifndef SkCsCalculateChecksum to
+ *	#ifndef SK_CS_CALCULATE_CHECKSUM
+ *	
  *	Revision 1.11  2003/03/11 14:05:55  rschmidt
  *	Replaced memset() by macro SK_MEMSET()
  *	Editorial changes
@@ -78,7 +82,7 @@
 
 #ifndef lint
 static const char SysKonnectFileId[] =
-	"@(#) $Id: skcsum.c,v 1.11 2003/03/11 14:05:55 rschmidt Exp $ (C) SysKonnect.";
+	"@(#) $Id: skcsum.c,v 1.12 2003/08/20 13:55:53 mschmid Exp $ (C) SysKonnect.";
 #endif	/* !lint */
 
 /******************************************************************************
@@ -791,7 +795,7 @@ int			NetNumber)
 	*pChecksum2Offset = SKCS_MAC_HEADER_SIZE + SKCS_IP_HEADER_SIZE;
 }	/* SkCsSetReceiveFlags */
 
-#ifndef SkCsCalculateChecksum
+#ifndef SK_CS_CALCULATE_CHECKSUM
 
 /******************************************************************************
  *
@@ -856,7 +860,7 @@ unsigned	Length)		/* Length of data. */
 	return ((unsigned) Checksum);
 }	/* SkCsCalculateChecksum */
 
-#endif /* SkCsCalculateChecksum */
+#endif /* SK_CS_CALCULATE_CHECKSUM */
 
 /******************************************************************************
  *

drivers/net/sk98lin/skdim.c

@@ -2,8 +2,8 @@
  *
  * Name:	skdim.c
  * Project:	GEnesis, PCI Gigabit Ethernet Adapter
- * Version:	$Revision: 1.2 $
- * Date:	$Date: 2003/08/21 12:35:05 $
+ * Version:	$Revision: 1.5 $
+ * Date:	$Date: 2003/11/28 12:55:40 $
  * Purpose:	All functions to maintain interrupt moderation
  *
  ******************************************************************************/
@@ -11,6 +11,7 @@
 /******************************************************************************
  *
  *	(C)Copyright 1998-2002 SysKonnect GmbH.
+ *	(C)Copyright 2002-2003 Marvell.
  *
  *	This program is free software; you can redistribute it and/or modify
  *	it under the terms of the GNU General Public License as published by
@@ -26,6 +27,15 @@
  * History:
  *	
  *	$Log: skdim.c,v $
+ *	Revision 1.5  2003/11/28 12:55:40  rroesler
+ *	Fix: support for new process timing interface added
+ *	
+ *	Revision 1.4  2003/10/10 10:58:56  mlindner
+ *	Fix: CPU detection under the kernel 2.6
+ *	
+ *	Revision 1.3  2003/10/07 08:17:08  mlindner
+ *	Fix: Copyright changes
+ *	
  *	Revision 1.2  2003/08/21 12:35:05  mlindner
  *	Fix: Corrected CPU detection and compile errors on single CPU machines
  *	
@@ -62,7 +72,7 @@
 
 #ifndef	lint
 static const char SysKonnectFileId[] =
-	"@(#) $Id: skdim.c,v 1.2 2003/08/21 12:35:05 mlindner Exp $ (C) SysKonnect.";
+	"@(#) $Id: skdim.c,v 1.5 2003/11/28 12:55:40 rroesler Exp $ (C) SysKonnect.";
 #endif
 
 #define __SKADDR_C
@@ -327,7 +337,9 @@ GetCurrentSystemLoad(SK_AC *pAC) {
 	**
 	**      struct kernel_stat kstat
 	**
-	** is not marked as an exported symbol
+	** is not marked as an exported symbol in the file
+	**
+	**      kernel/ksyms.c 
 	**
 	** As a consequence, using this driver as KLM is not possible
 	** and any access of the structure kernel_stat via the 

drivers/net/sk98lin/skgehwt.c

 /******************************************************************************
  *
  * Name:	skgehwt.c
- * Project:	Gigabit Ethernet Adapters, Common Modules
- * Version:	$Revision: 1.14 $
- * Date:	$Date: 2003/05/13 18:01:58 $
- * Purpose:	Hardware Timer.
+ * Project:	Gigabit Ethernet Adapters, Event Scheduler Module
+ * Version:	$Revision: 1.15 $
+ * Date:	$Date: 2003/09/16 13:41:23 $
+ * Purpose:	Hardware Timer
  *
  ******************************************************************************/
 
@@ -27,6 +27,10 @@
  * History:
  *
  *	$Log: skgehwt.c,v $
+ *	Revision 1.15  2003/09/16 13:41:23  rschmidt
+ *	Added (C) Marvell to SysKonnectFileId
+ *	Editorial changes
+ *	
  *	Revision 1.14  2003/05/13 18:01:58  mkarl
  *	Editorial changes.
  *	
@@ -69,19 +73,15 @@
  *	
  *	Revision 1.1  1998/08/05 11:28:36  gklug
  *	first version: adapted from SMT/FDDI
- *	
- *	
- *	
  *
  ******************************************************************************/
 
-
 /*
-	Event queue and dispatcher
-*/
+ *	Event queue and dispatcher
+ */
 #if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM))))
 static const char SysKonnectFileId[] =
-	"$Header: /usr56/projects/ge/schedule/skgehwt.c,v 1.14 2003/05/13 18:01:58 mkarl Exp $" ;
+	"@(#) $Id: skgehwt.c,v 1.15 2003/09/16 13:41:23 rschmidt Exp $ (C) Marvell.";
 #endif
 
 #include "h/skdrv1st.h"		/* Driver Specific Definitions */
@@ -89,10 +89,7 @@ static const char SysKonnectFileId[] =
 
 #ifdef __C2MAN__
 /*
-	Hardware Timer function queue management.
-
-	General Description:
-
+ *   Hardware Timer function queue management.
  */
 intro()
 {}
@@ -117,9 +114,9 @@ SK_IOC	Ioc)	/* IoContext */
 {
 	pAC->Hwt.TStart = 0 ;
 	pAC->Hwt.TStop	= 0 ;
-	pAC->Hwt.TActive = SK_FALSE ;
+	pAC->Hwt.TActive = SK_FALSE;
 
-	SkHwtStop(pAC,Ioc) ;
+	SkHwtStop(pAC, Ioc);
 }
 
 /*
@@ -132,28 +129,29 @@ SK_AC	*pAC,	/* Adapters context */
 SK_IOC	Ioc,	/* IoContext */
 SK_U32	Time)	/* Time in units of 16us to load the timer with. */
 {
-	SK_U32	Cnt ;
+	SK_U32	Cnt;
 
 	if (Time > SK_HWT_MAX)
-		Time = SK_HWT_MAX ;
+		Time = SK_HWT_MAX;
 
-	pAC->Hwt.TStart = Time ;
-	pAC->Hwt.TStop = 0L ;
+	pAC->Hwt.TStart = Time;
+	pAC->Hwt.TStop = 0L;
 
-	Cnt = Time ;
+	Cnt = Time;
 
 	/*
 	 * if time < 16 us
 	 *	time = 16 us
 	 */
 	if (!Cnt) {
-		Cnt++ ;
+		Cnt++;
 	}
 
-	SK_OUT32(Ioc, B2_TI_INI, Cnt * SK_HWT_FAC) ;
-	SK_OUT16(Ioc, B2_TI_CRTL, TIM_START) ;	/* Start timer. */
+	SK_OUT32(Ioc, B2_TI_INI, Cnt * SK_HWT_FAC);
+	
+	SK_OUT16(Ioc, B2_TI_CTRL, TIM_START);	/* Start timer. */
 
-	pAC->Hwt.TActive = SK_TRUE ;
+	pAC->Hwt.TActive = SK_TRUE;
 }
 
 /*
@@ -164,10 +162,11 @@ void	SkHwtStop(
 SK_AC	*pAC,	/* Adapters context */
 SK_IOC	Ioc)	/* IoContext */
 {
-	SK_OUT16(Ioc, B2_TI_CRTL, TIM_STOP) ;
-	SK_OUT16(Ioc, B2_TI_CRTL, TIM_CLR_IRQ) ;
+	SK_OUT16(Ioc, B2_TI_CTRL, TIM_STOP);
+	
+	SK_OUT16(Ioc, B2_TI_CTRL, TIM_CLR_IRQ);
 
-	pAC->Hwt.TActive = SK_FALSE ;
+	pAC->Hwt.TActive = SK_FALSE;
 }
 
 
@@ -182,26 +181,31 @@ SK_U32	SkHwtRead(
 SK_AC	*pAC,	/* Adapters context */
 SK_IOC	Ioc)	/* IoContext */
 {
-	SK_U32	TRead ;
-	SK_U32	IStatus ;
+	SK_U32	TRead;
+	SK_U32	IStatus;
 
 	if (pAC->Hwt.TActive) {
-		SkHwtStop(pAC,Ioc) ;
+		
+		SkHwtStop(pAC, Ioc);
 
 		SK_IN32(Ioc, B2_TI_VAL, &TRead);
 		TRead /= SK_HWT_FAC;
 
 		SK_IN32(Ioc, B0_ISRC, &IStatus);
 
-		/* Check if timer expired (or wraparound). */
+		/* Check if timer expired (or wraped around) */
 		if ((TRead > pAC->Hwt.TStart) || (IStatus & IS_TIMINT)) {
-			SkHwtStop(pAC,Ioc) ;
-			pAC->Hwt.TStop = pAC->Hwt.TStart ;
-		} else {
-			pAC->Hwt.TStop = pAC->Hwt.TStart - TRead ;
+			
+			SkHwtStop(pAC, Ioc);
+			
+			pAC->Hwt.TStop = pAC->Hwt.TStart;
+		}
+		else {
+			
+			pAC->Hwt.TStop = pAC->Hwt.TStart - TRead;
 		}
 	}
-	return (pAC->Hwt.TStop) ;
+	return(pAC->Hwt.TStop);
 }
 
 /*
@@ -211,9 +215,11 @@ void	SkHwtIsr(
 SK_AC	*pAC,	/* Adapters context */
 SK_IOC	Ioc)	/* IoContext */
 {
-	SkHwtStop(pAC,Ioc);
+	SkHwtStop(pAC, Ioc);
+	
 	pAC->Hwt.TStop = pAC->Hwt.TStart;
-	SkTimerDone(pAC,Ioc) ;
+	
+	SkTimerDone(pAC, Ioc);
 }
 
 /* End of file */

drivers/net/sk98lin/skgeinit.c

@@ -2,8 +2,8 @@
  *
  * Name:	skgeinit.c
  * Project:	Gigabit Ethernet Adapters, Common Modules
- * Version:	$Revision: 1.93 $
- * Date:	$Date: 2003/05/28 15:44:43 $
+ * Version:	$Revision: 1.97 $
+ * Date:	$Date: 2003/10/02 16:45:31 $
  * Purpose:	Contains functions to initialize the adapter
  *
  ******************************************************************************/
@@ -27,6 +27,32 @@
  * History:
  *
  *	$Log: skgeinit.c,v $
+ *	Revision 1.97  2003/10/02 16:45:31  rschmidt
+ *	Replaced default values of GMAC parameters with defines.
+ *	Removed hard reset of MACs in SkGeDeInit().
+ *	Added define SK_PHY_LP_MODE around power saving mode in SkGeDeInit().
+ *	Added check for VAUX available before switch power to VAUX.
+ *	
+ *	Revision 1.96  2003/09/18 14:02:41  rroesler
+ *	Add: Perform a hardreset of MACs in GeDeInit()
+ *	
+ *	Revision 1.95  2003/09/16 14:26:59  rschmidt
+ *	Added switch power to VCC (WA for VAUX problem) in SkGeInit1().
+ *	Fixed setting PHY to coma mode and D3 power state in SkGeDeInit().
+ *	Editorial changes.
+ *	
+ *	Revision 1.94  2003/09/16 07:17:10  mschmid
+ *	Added init for new members in port structure for MAC control
+ *	- PMacColThres
+ *	- PMacJamLen
+ *	- PMacJamIpgVal
+ *	- PMacJamIpgData
+ *	- PMacIpgData
+ *	- PMacLimit4
+ *	Added init for PHY power state in port structure
+ *	- PPhyPowerState
+ *	Added shutdown handling for Yukon Plus in SkGeDeInit()
+ *	
  *	Revision 1.93  2003/05/28 15:44:43  rschmidt
  *	Added check for chip Id on WOL WA for chip Rev. A.
  *	Added setting of GILevel in SkGeDeInit().
@@ -446,7 +472,7 @@
 
 #if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM))))
 static const char SysKonnectFileId[] =
-	"@(#) $Id: skgeinit.c,v 1.93 2003/05/28 15:44:43 rschmidt Exp $ (C) Marvell.";
+	"@(#) $Id: skgeinit.c,v 1.97 2003/10/02 16:45:31 rschmidt Exp $ (C) Marvell.";
 #endif
 
 struct s_QOffTab {
@@ -1013,8 +1039,6 @@ int		Port)		/* Port Index (MAC_1 + n) */
 	 *	- enable the FIFO
 	 */
 	
-	Word = (SK_U16)GMF_RX_CTRL_DEF;
-	
 #ifdef GENESIS
 	if (pAC->GIni.GIGenesis) {
 		/* Configure Rx MAC FIFO */
@@ -1039,6 +1063,8 @@ int		Port)		/* Port Index (MAC_1 + n) */
 		/* set Rx GMAC FIFO Flush Mask */
 		SK_OUT16(IoC, MR_ADDR(Port, RX_GMF_FL_MSK), (SK_U16)RX_FF_FL_DEF_MSK);
 		
+		Word = (SK_U16)GMF_RX_CTRL_DEF;
+
 		/* disable Rx GMAC FIFO Flush for YUKON-Lite Rev. A0 only */
 		if (pAC->GIni.GIYukonLite && pAC->GIni.GIChipId == CHIP_ID_YUKON) {
 
@@ -1809,6 +1835,13 @@ SK_IOC	IoC)		/* IO context */
 		pPrt->PAutoNegFail = SK_FALSE;
 		pPrt->PHWLinkUp = SK_FALSE;
 		pPrt->PLinkBroken = SK_TRUE; /* See WA code */
+		pPrt->PPhyPowerState = PHY_PM_OPERATIONAL_MODE;
+		pPrt->PMacColThres = TX_COL_DEF;
+		pPrt->PMacJamLen = TX_JAM_LEN_DEF;
+		pPrt->PMacJamIpgVal	= TX_JAM_IPG_DEF;
+		pPrt->PMacJamIpgData = TX_IPG_JAM_DEF;
+		pPrt->PMacIpgData = IPG_DATA_DEF;
+		pPrt->PMacLimit4 = SK_FALSE;
 	}
 
 	pAC->GIni.GIPortUsage = SK_RED_LINK;
@@ -1963,7 +1996,7 @@ SK_IOC	IoC)		/* IO context */
 	/* restore CLK_RUN bits */
 	SK_OUT16(IoC, B0_CTST, (SK_U16)(CtrlStat &
 		(CS_CLK_RUN_HOT | CS_CLK_RUN_RST | CS_CLK_RUN_ENA)));
-	
+
 	/* read Chip Identification Number */
 	SK_IN8(IoC, B2_CHIP_ID, &Byte);
 	pAC->GIni.GIChipId = Byte;
@@ -2053,6 +2086,10 @@ SK_IOC	IoC)		/* IO context */
 			}
 		}
 
+		/* switch power to VCC (WA for VAUX problem) */
+		SK_OUT8(IoC, B0_POWER_CTRL, (SK_U8)(PC_VAUX_ENA | PC_VCC_ENA |
+			PC_VAUX_OFF | PC_VCC_ON));
+
 		/* read the Interrupt source */
 		SK_IN32(IoC, B0_ISRC, &DWord);
 		
@@ -2395,6 +2432,11 @@ SK_IOC	IoC)		/* IO context */
 	int	i;
 	SK_U16	Word;
 
+#ifdef SK_PHY_LP_MODE
+	SK_U8	Byte;
+	SK_U16	PmCtlSts;
+#endif /* SK_PHY_LP_MODE */
+
 #if (!defined(SK_SLIM) && !defined(VCPU))
 	/* ensure I2C is ready */
 	SkI2cWaitIrq(pAC, IoC);
@@ -2409,6 +2451,38 @@ SK_IOC	IoC)		/* IO context */
 		}
 	}
 
+#ifdef SK_PHY_LP_MODE
+    /*
+	 * for power saving purposes within mobile environments
+	 * we set the PHY to coma mode and switch to D3 power state.
+	 */
+	if (pAC->GIni.GIYukonLite &&
+		pAC->GIni.GIChipRev == CHIP_REV_YU_LITE_A3) {
+
+		/* for all ports switch PHY to coma mode */
+		for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
+			
+			SkGmEnterLowPowerMode(pAC, IoC, i, PHY_PM_DEEP_SLEEP);
+		}
+
+		if (pAC->GIni.GIVauxAvail) {
+			/* switch power to VAUX */
+			Byte = PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_ON | PC_VCC_OFF;
+
+			SK_OUT8(IoC, B0_POWER_CTRL, Byte);
+		}
+		
+		/* switch to D3 state */
+		SK_IN16(IoC, PCI_C(PCI_PM_CTL_STS), &PmCtlSts);
+
+		PmCtlSts |= PCI_PM_STATE_D3;
+
+		SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON);
+
+		SK_OUT16(IoC, PCI_C(PCI_PM_CTL_STS), PmCtlSts);
+	}
+#endif /* SK_PHY_LP_MODE */
+
 	/* Reset all bits in the PCI STATUS register */
 	/*
 	 * Note: PCI Cfg cycles cannot be used, because they are not

drivers/net/sk98lin/skgemib.c

@@ -2,8 +2,8 @@
  *
  * Name:	skgemib.c
  * Project:	GEnesis, PCI Gigabit Ethernet Adapter
- * Version:	$Revision: 1.9 $
- * Date:	$Date: 2003/05/23 12:55:20 $
+ * Version:	$Revision: 1.11 $
+ * Date:	$Date: 2003/09/15 13:38:12 $
  * Purpose:	Private Network Management Interface Management Database
  *
  ****************************************************************************/
@@ -27,6 +27,19 @@
  * History:
  *
  *	$Log: skgemib.c,v $
+ *	Revision 1.11  2003/09/15 13:38:12  tschilli
+ *	OID_SKGE_PHY_LP_MODE included only after using #define SK_PHY_LP_MODE.
+ *	
+ *	Revision 1.10  2003/08/15 12:28:59  tschilli
+ *	Added new OIDs:
+ *	OID_SKGE_DRIVER_RELDATE
+ *	OID_SKGE_DRIVER_FILENAME
+ *	OID_SKGE_CHIPID
+ *	OID_SKGE_RAMSIZE
+ *	OID_SKGE_VAUXAVAIL
+ *	OID_SKGE_PHY_TYPE
+ *	OID_SKGE_PHY_LP_MODE
+ *	
  *	Revision 1.9  2003/05/23 12:55:20  tschilli
  *	OID_SKGE_BOARDLEVEL added.
  *	
@@ -356,6 +369,16 @@ PNMI_STATIC const SK_PNMI_TAB_ENTRY IdTable[] = {
 		0,
 		SK_PNMI_MAI_OFF(DriverVersion),
 		SK_PNMI_RO, General, 0},
+	{OID_SKGE_DRIVER_RELDATE,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(DriverReleaseDate),
+		SK_PNMI_RO, General, 0},
+	{OID_SKGE_DRIVER_FILENAME,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(DriverFileName),
+		SK_PNMI_RO, General, 0},
 	{OID_SKGE_HW_DESCR,
 		1,
 		0,
@@ -371,6 +394,21 @@ PNMI_STATIC const SK_PNMI_TAB_ENTRY IdTable[] = {
 		0,
 		SK_PNMI_MAI_OFF(Chipset),
 		SK_PNMI_RO, General, 0},
+	{OID_SKGE_CHIPID,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(ChipId),
+		SK_PNMI_RO, General, 0},
+	{OID_SKGE_RAMSIZE,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(RamSize),
+		SK_PNMI_RO, General, 0},
+	{OID_SKGE_VAUXAVAIL,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(VauxAvail),
+		SK_PNMI_RO, General, 0},
 	{OID_SKGE_ACTION,
 		1,
 		0,
@@ -876,6 +914,18 @@ PNMI_STATIC const SK_PNMI_TAB_ENTRY IdTable[] = {
 		sizeof(SK_PNMI_CONF),
 		SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfConnector),
 		SK_PNMI_RO, MacPrivateConf, 0},
+	{OID_SKGE_PHY_TYPE,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_CONF),
+		SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfPhyType),
+		SK_PNMI_RO, MacPrivateConf, 0},
+#ifdef SK_PHY_LP_MODE
+		{OID_SKGE_PHY_LP_MODE,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_CONF),
+		SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfPhyMode),
+		SK_PNMI_RW, MacPrivateConf, 0},
+#endif	
 	{OID_SKGE_LINK_CAP,
 		SK_PNMI_MAC_ENTRIES,
 		sizeof(SK_PNMI_CONF),

drivers/net/sk98lin/skgesirq.c

@@ -2,8 +2,8 @@
  *
  * Name:	skgesirq.c
  * Project:	Gigabit Ethernet Adapters, Common Modules
- * Version:	$Revision: 1.91 $
- * Date:	$Date: 2003/07/04 12:46:22 $
+ * Version:	$Revision: 1.92 $
+ * Date:	$Date: 2003/09/16 14:37:07 $
  * Purpose:	Special IRQ module
  *
  ******************************************************************************/
@@ -27,6 +27,12 @@
  * History:
  *
  *	$Log: skgesirq.c,v $
+ *	Revision 1.92  2003/09/16 14:37:07  rschmidt
+ *	Added debug messages in some SkGePortCheckUp...() routines.
+ *	Fixed compiler warnings for different types.
+ *	Avoided port check up in reset state (eg. coma mode).
+ *	Editorial changes.
+ *	
  *	Revision 1.91  2003/07/04 12:46:22  rschmidt
  *	Added debug messages in SkGePortCheckUpGmac().
  *	Added error log message and new driver event SK_DRV_DOWNSHIFT_DET
@@ -410,7 +416,7 @@
 
 #if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM))))
 static const char SysKonnectFileId[] =
-	"@(#) $Id: skgesirq.c,v 1.91 2003/07/04 12:46:22 rschmidt Exp $ (C) Marvell.";
+	"@(#) $Id: skgesirq.c,v 1.92 2003/09/16 14:37:07 rschmidt Exp $ (C) Marvell.";
 #endif
 
 #include "h/skdrv1st.h"		/* Driver Specific Definitions */
@@ -490,7 +496,7 @@ int		Port)	/* Port Index (MAC_1 + n) */
 		("AutoSensing: First mode %d on Port %d\n",
 		(int)SK_LMODE_AUTOFULL, Port));
 
-	pPrt->PLinkMode = SK_LMODE_AUTOFULL;
+	pPrt->PLinkMode = (SK_U8)SK_LMODE_AUTOFULL;
 
 	return;
 }	/* SkHWInitDefSense */
@@ -606,7 +612,7 @@ int		Port)		/* Port Index (MAC_1 + n) */
 	/* Reset Port stati */
     pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_UNKNOWN;
     pPrt->PFlowCtrlStatus = (SK_U8)SK_FLOW_STAT_NONE;
-	pPrt->PLinkSpeedUsed = SK_LSPEED_STAT_INDETERMINATED;
+	pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_INDETERMINATED;
 
 	/* Re-init Phy especially when the AutoSense default is set now */
 	SkMacInitPhy(pAC, IoC, Port, SK_FALSE);
@@ -655,19 +661,19 @@ int		Port)	/* Port Index (MAC_1 + n) */
 		case SK_LSPEED_AUTO:
 			/* default is 1000 Mbps */
 		case SK_LSPEED_1000MBPS:
-			pPrt->PLinkSpeedUsed = SK_LSPEED_STAT_1000MBPS;
+			pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_1000MBPS;
 			break;
 		case SK_LSPEED_100MBPS:
-			pPrt->PLinkSpeedUsed = SK_LSPEED_STAT_100MBPS;
+			pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_100MBPS;
 			break;
 		case SK_LSPEED_10MBPS:
-			pPrt->PLinkSpeedUsed = SK_LSPEED_STAT_10MBPS;
+			pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_10MBPS;
 			break;
 		}
 
 		/* Set Link Mode Status */
 		if (pPrt->PLinkMode == SK_LMODE_FULL) {
-			pPrt->PLinkModeStatus = SK_LMODE_STAT_FULL;
+			pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_FULL;
 		}
 		else {
             pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_HALF;
@@ -1598,8 +1604,7 @@ SK_BOOL	AutoNeg)	/* Is Auto-negotiation used ? */
 			 * (clear Page Received bit if set)
 			 */
 			SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_AUNE_EXP, &ExtStat);
-			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-				("AutoNeg done Port %d\n", Port));
+			
 			return(SK_HW_PS_LINK);
 		}
 		
@@ -1870,7 +1875,7 @@ SK_BOOL	AutoNeg)	/* Is Auto-negotiation used ? */
 	SkMacAutoNegLipaPhy(pAC, IoC, Port, PhyStat);
 	
 	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-		("AutoNeg: %d, PhyStat: 0x%04X\n", AutoNeg, PhyStat));
+		("CheckUp Port %d, PhyStat: 0x%04X\n", Port, PhyStat));
 
 	SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &ResAb);
 
@@ -1897,8 +1902,11 @@ SK_BOOL	AutoNeg)	/* Is Auto-negotiation used ? */
 
 	if (AutoNeg) {
 		if ((PhyStat & PHY_ST_AN_OVER) != 0) {
+			
 			SkHWLinkUp(pAC, IoC, Port);
+			
 			Done = SkMacAutoNegDone(pAC, IoC, Port);
+			
 			if (Done != SK_AND_OK) {
 #ifdef DEBUG
 				/* Get PHY parameters, for debugging only */
@@ -1924,9 +1932,6 @@ SK_BOOL	AutoNeg)	/* Is Auto-negotiation used ? */
 						(void *)NULL);
 				}
 #endif /* DEBUG */
-				
-				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-					("AutoNeg done Port %d\n", Port));
 				return(SK_HW_PS_LINK);
 			}
 		}
@@ -1989,9 +1994,22 @@ SK_BOOL	AutoNeg)	/* Is Auto-negotiation used ? */
 	SK_U16		PhySpecStat;/* PHY Specific Status */
 	SK_U16		ResAb;		/* Master/Slave resolution */
 	SK_EVPARA	Para;
+#ifdef DEBUG
+	SK_U16		Word;		/* I/O helper */
+#endif /* DEBUG */
 
 	pPrt = &pAC->GIni.GP[Port];
 
+	if (pPrt->PHWLinkUp) {
+		return(SK_HW_PS_NONE);
+	}
+
+	/* Read PHY Status */
+	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_STAT, &PhyStat);
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+		("CheckUp Port %d, PhyStat: 0x%04X\n", Port, PhyStat));
+
 	/* Read PHY Interrupt Status */
 	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_INT_STAT, &PhyIsrc);
 
@@ -2005,16 +2023,6 @@ SK_BOOL	AutoNeg)	/* Is Auto-negotiation used ? */
 			("Link Speed Changed, PhyIsrc: 0x%04X\n", PhyIsrc));
 	}
 
-	if (pPrt->PHWLinkUp) {
-		return(SK_HW_PS_NONE);
-	}
-
-	/* Read PHY Status */
-	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_STAT, &PhyStat);
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-		("AutoNeg: %d, PhyStat: 0x%04X\n", AutoNeg, PhyStat));
-
 	SkMacAutoNegLipaPhy(pAC, IoC, Port, PhyStat);
 	
 	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_1000T_STAT, &ResAb);
@@ -2034,7 +2042,20 @@ SK_BOOL	AutoNeg)	/* Is Auto-negotiation used ? */
 	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_PHY_STAT, &PhySpecStat);
 	
 	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-		("AutoNeg: %d, PhySpecStat: 0x%04X\n", AutoNeg, PhySpecStat));
+		("Phy1000BT: 0x%04X, PhySpecStat: 0x%04X\n", ResAb, PhySpecStat));
+
+#ifdef DEBUG
+	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_AUNE_EXP, &Word);
+
+	if ((PhyIsrc & PHY_M_IS_AN_PR) != 0 || (Word & PHY_ANE_RX_PG) != 0 ||
+		(PhySpecStat & PHY_M_PS_PAGE_REC) != 0)  {
+		/* Read PHY Next Page Link Partner */
+		SkGmPhyRead(pAC, IoC, Port, PHY_MARV_NEPG_LP, &Word);
+
+		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+			("Page Received, NextPage: 0x%04X\n", Word));
+	}
+#endif /* DEBUG */
 
 	if ((PhySpecStat & PHY_M_PS_LINK_UP) == 0) {
 		return(SK_HW_PS_NONE);
@@ -2069,8 +2090,6 @@ SK_BOOL	AutoNeg)	/* Is Auto-negotiation used ? */
 				return(SK_HW_PS_RESTART);
 			}
 			
-			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-				("AutoNeg done Port %d\n", Port));
 			return(SK_HW_PS_LINK);
 		}
 	}
@@ -2179,8 +2198,6 @@ SK_BOOL	AutoNeg)	/* Is Auto-negotiation used ? */
 				 * extra link down/ups
 				 */
 				SkXmPhyRead(pAC, IoC, Port, PHY_LONE_INT_STAT, &ExtStat);
-				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-					("AutoNeg done Port %d\n", Port));
 				return(SK_HW_PS_LINK);
 			}
 		}
@@ -2278,8 +2295,14 @@ SK_EVPARA	Para)		/* Event specific Parameter */
 
 	switch (Event) {
 	case SK_HWEV_WATIM:
-		/* Check whether port came up */
-		PortStat = SkGePortCheckUp(pAC, IoC, (int)Port);
+		if (pPrt->PState == SK_PRT_RESET) {
+		
+			PortStat = SK_HW_PS_NONE;
+		}
+		else {
+			/* Check whether port came up */
+			PortStat = SkGePortCheckUp(pAC, IoC, (int)Port);
+		}
 
 		switch (PortStat) {
 		case SK_HW_PS_RESTART:

drivers/net/sk98lin/sklm80.c

 /******************************************************************************
  *
  * Name:	sklm80.c
- * Project:	GEnesis, PCI Gigabit Ethernet Adapter
- * Version:	$Revision: 1.20 $
- * Date:	$Date: 2002/08/13 09:16:27 $
- * Purpose:	Funktions to access Voltage and Temperature Sensor (LM80)
+ * Project:	Gigabit Ethernet Adapters, TWSI-Module
+ * Version:	$Revision: 1.22 $
+ * Date:	$Date: 2003/10/20 09:08:21 $
+ * Purpose:	Functions to access Voltage and Temperature Sensor (LM80)
  *
  ******************************************************************************/
 
 /******************************************************************************
  *
- *	(C)Copyright 1998-2002 SysKonnect GmbH.
+ *	(C)Copyright 1998-2002 SysKonnect.
+ *	(C)Copyright 2002-2003 Marvell.
  *
  *	This program is free software; you can redistribute it and/or modify
  *	it under the terms of the GNU General Public License as published by
@@ -26,15 +27,21 @@
  * History:
  *
  *	$Log: sklm80.c,v $
+ *	Revision 1.22  2003/10/20 09:08:21  rschmidt
+ *	Editorial changes.
+ *	
+ *	Revision 1.21  2003/09/23 09:29:04  malthoff
+ *	Parameter Dev_Size added to macro SK_I2C_CTL.
+ *	
  *	Revision 1.20  2002/08/13 09:16:27  rschmidt
  *	Changed return value for SkLm80ReadSensor() back to 'int'
- *	Editorial changes
+ *	Editorial changes.
  *	
  *	Revision 1.19  2002/08/06 09:43:31  jschmalz
- *	Extensions and changes for Yukon
+ *	Extensions and changes for Yukon.
  *	
  *	Revision 1.18  2002/08/02 12:26:57  rschmidt
- *	Editorial changes
+ *	Editorial changes.
  *	
  *	Revision 1.17  1999/11/22 13:35:51  cgoos
  *	Changed license header to GPL.
@@ -93,16 +100,15 @@
  *	Revision 1.1  1998/07/17 09:57:12  gklug
  *	initial version
  *
- *
- *
  ******************************************************************************/
 
-
 /*
 	LM80 functions
 */
+#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM))))
 static const char SysKonnectFileId[] =
-	"$Id: sklm80.c,v 1.20 2002/08/13 09:16:27 rschmidt Exp $" ;
+	"@(#) $Id: sklm80.c,v 1.22 2003/10/20 09:08:21 rschmidt Exp $ (C) Marvell. ";
+#endif
 
 #include "h/skdrv1st.h"		/* Driver Specific Definitions */
 #include "h/lm80.h"
@@ -202,7 +208,7 @@ SK_SENSOR	*pSen)	/* Sensor to be read */
 	switch (pSen->SenState) {
 	case SK_SEN_IDLE:
 		/* Send address to ADDR register */
-		SK_I2C_CTL(IoC, I2C_READ, pSen->SenDev, pSen->SenReg, 0);
+		SK_I2C_CTL(IoC, I2C_READ, pSen->SenDev, I2C_025K_DEV, pSen->SenReg, 0);
 
 		pSen->SenState = SK_SEN_VALUE ;
 		BREAK_OR_WAIT(pAC, IoC, I2C_READ);
@@ -250,7 +256,7 @@ SK_SENSOR	*pSen)	/* Sensor to be read */
 			(pSen->SenValue % SK_LM80_TEMP_LSB);
 
 		/* Send address to ADDR register */
-		SK_I2C_CTL(IoC, I2C_READ, pSen->SenDev, LM80_TEMP_CTRL, 0);
+		SK_I2C_CTL(IoC, I2C_READ, pSen->SenDev, I2C_025K_DEV, LM80_TEMP_CTRL, 0);
 
 		pSen->SenState = SK_SEN_VALEXT ;
 		BREAK_OR_WAIT(pAC, IoC, I2C_READ);
@@ -284,3 +290,4 @@ SK_SENSOR	*pSen)	/* Sensor to be read */
 	/* Not completed */
 	return(0);
 }
+

drivers/net/sk98lin/skqueue.c

 /******************************************************************************
  *
  * Name:	skqueue.c
- * Project:	Gigabit Ethernet Adapters, Schedule-Modul
- * Version:	$Revision: 1.19 $
- * Date:	$Date: 2003/05/13 18:00:07 $
+ * Project:	Gigabit Ethernet Adapters, Event Scheduler Module
+ * Version:	$Revision: 1.20 $
+ * Date:	$Date: 2003/09/16 13:44:00 $
  * Purpose:	Management of an event queue.
  *
  ******************************************************************************/
@@ -27,6 +27,10 @@
  * History:
  *
  *	$Log: skqueue.c,v $
+ *	Revision 1.20  2003/09/16 13:44:00  rschmidt
+ *	Added (C) Marvell to SysKonnectFileId
+ *	Editorial changes
+ *	
  *	Revision 1.19  2003/05/13 18:00:07  mkarl
  *	Removed calls to RLMT, TWSI, and PNMI for SLIM driver (SK_SLIM).
  *	Editorial changes.
@@ -85,18 +89,16 @@
  *	
  *	Revision 1.1  1998/07/30 15:14:01  gklug
  *	Initial version. Adapted from SMT
- *	
- *	
  *
  ******************************************************************************/
 
 
 /*
-	Event queue and dispatcher
-*/
+ *	Event queue and dispatcher
+ */
 #if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM))))
 static const char SysKonnectFileId[] =
-	"$Header: /usr56/projects/ge/schedule/skqueue.c,v 1.19 2003/05/13 18:00:07 mkarl Exp $" ;
+	"@(#) $Id: skqueue.c,v 1.20 2003/09/16 13:44:00 rschmidt Exp $ (C) Marvell.";
 #endif
 
 #include "h/skdrv1st.h"		/* Driver Specific Definitions */
@@ -124,11 +126,11 @@ intro()
 void	SkEventInit(
 SK_AC	*pAC,	/* Adapter context */
 SK_IOC	Ioc,	/* IO context */
-int	Level)	/* Init level */
+int		Level)	/* Init level */
 {
 	switch (Level) {
 	case SK_INIT_DATA:
-		pAC->Event.EvPut = pAC->Event.EvGet = pAC->Event.EvQueue ;
+		pAC->Event.EvPut = pAC->Event.EvGet = pAC->Event.EvQueue;
 		break;
 	default:
 		break;
@@ -144,14 +146,15 @@ SK_U32		Class,	/* Event Class */
 SK_U32		Event,	/* Event to be queued */
 SK_EVPARA	Para)	/* Event parameter */
 {
-	pAC->Event.EvPut->Class = Class ;
-	pAC->Event.EvPut->Event = Event ;
-	pAC->Event.EvPut->Para = Para ;
+	pAC->Event.EvPut->Class = Class;
+	pAC->Event.EvPut->Event = Event;
+	pAC->Event.EvPut->Para = Para;
+	
 	if (++pAC->Event.EvPut == &pAC->Event.EvQueue[SK_MAX_EVENT])
-		pAC->Event.EvPut = pAC->Event.EvQueue ;
+		pAC->Event.EvPut = pAC->Event.EvQueue;
 
 	if (pAC->Event.EvPut == pAC->Event.EvGet) {
-		SK_ERR_LOG(pAC, SK_ERRCL_NORES, SKERR_Q_E001, SKERR_Q_E001MSG) ;
+		SK_ERR_LOG(pAC, SK_ERRCL_NORES, SKERR_Q_E001, SKERR_Q_E001MSG);
 	}
 }
 
@@ -168,77 +171,79 @@ int	SkEventDispatcher(
 SK_AC	*pAC,	/* Adapters Context */
 SK_IOC	Ioc)	/* Io context */
 {
-	SK_EVENTELEM	*pEv ;	/* pointer into queue */
-	SK_U32			Class ;
-	int			Rtv ;
-
-	pEv = pAC->Event.EvGet ;
-	PRINTF("dispatch get %x put %x\n",pEv,pAC->Event.ev_put) ;
+	SK_EVENTELEM	*pEv;	/* pointer into queue */
+	SK_U32			Class;
+	int			Rtv;
+
+	pEv = pAC->Event.EvGet;
+	
+	PRINTF("dispatch get %x put %x\n", pEv, pAC->Event.ev_put);
+	
 	while (pEv != pAC->Event.EvPut) {
-		PRINTF("dispatch Class %d Event %d\n",pEv->Class,pEv->Event) ;
-		switch(Class = pEv->Class) {
+		PRINTF("dispatch Class %d Event %d\n", pEv->Class, pEv->Event);
+
+		switch (Class = pEv->Class) {
 #ifndef SK_USE_LAC_EV
 #ifndef SK_SLIM
-		case SKGE_RLMT :	/* RLMT Event */
-			Rtv = SkRlmtEvent(pAC,Ioc,pEv->Event,pEv->Para);
-			break ;
-		case SKGE_I2C :		/* I2C Event */
-			Rtv = SkI2cEvent(pAC,Ioc,pEv->Event,pEv->Para);
-			break ;
-		case SKGE_PNMI :
-			Rtv = SkPnmiEvent(pAC,Ioc,pEv->Event,pEv->Para);
-			break ;
+		case SKGE_RLMT:		/* RLMT Event */
+			Rtv = SkRlmtEvent(pAC, Ioc, pEv->Event, pEv->Para);
+			break;
+		case SKGE_I2C:		/* I2C Event */
+			Rtv = SkI2cEvent(pAC, Ioc, pEv->Event, pEv->Para);
+			break;
+		case SKGE_PNMI:		/* PNMI Event */
+			Rtv = SkPnmiEvent(pAC, Ioc, pEv->Event, pEv->Para);
+			break;
 #endif	/* not SK_SLIM */
 #endif	/* not SK_USE_LAC_EV */
-		case SKGE_DRV :		/* Driver Event */
-			Rtv = SkDrvEvent(pAC,Ioc,pEv->Event,pEv->Para);
-			break ;
-#ifndef SK_USE_SW_TIMER        
-		case SKGE_HWAC :
-			Rtv = SkGeSirqEvent(pAC,Ioc,pEv->Event,pEv->Para);
-			break ;
+		case SKGE_DRV:		/* Driver Event */
+			Rtv = SkDrvEvent(pAC, Ioc, pEv->Event, pEv->Para);
+			break;
+#ifndef SK_USE_SW_TIMER
+		case SKGE_HWAC:
+			Rtv = SkGeSirqEvent(pAC, Ioc, pEv->Event, pEv->Para);
+			break;
 #else /* !SK_USE_SW_TIMER */
-        case SKGE_SWT : 
-			Rtv = SkSwtEvent(pAC,Ioc,pEv->Event,pEv->Para);
-			break ;
+        case SKGE_SWT :
+			Rtv = SkSwtEvent(pAC, Ioc, pEv->Event, pEv->Para);
+			break;
 #endif /* !SK_USE_SW_TIMER */
-#ifdef SK_USE_LAC_EV        
+#ifdef SK_USE_LAC_EV
 		case SKGE_LACP :
-			Rtv = SkLacpEvent(pAC,Ioc,pEv->Event,pEv->Para);
-			break ;
+			Rtv = SkLacpEvent(pAC, Ioc, pEv->Event, pEv->Para);
+			break;
 		case SKGE_RSF :
-			Rtv = SkRsfEvent(pAC,Ioc,pEv->Event,pEv->Para);
-			break ;
+			Rtv = SkRsfEvent(pAC, Ioc, pEv->Event, pEv->Para);
+			break;
 		case SKGE_MARKER :
-			Rtv = SkMarkerEvent(pAC,Ioc,pEv->Event,pEv->Para);
-			break ;
+			Rtv = SkMarkerEvent(pAC, Ioc, pEv->Event, pEv->Para);
+			break;
 		case SKGE_FD :
-			Rtv = SkFdEvent(pAC,Ioc,pEv->Event,pEv->Para);
-			break ;
+			Rtv = SkFdEvent(pAC, Ioc, pEv->Event, pEv->Para);
+			break;
 #endif /* SK_USE_LAC_EV */
 #ifdef	SK_USE_CSUM
 		case SKGE_CSUM :
-			Rtv = SkCsEvent(pAC,Ioc,pEv->Event,pEv->Para);
-			break ;
+			Rtv = SkCsEvent(pAC, Ioc, pEv->Event, pEv->Para);
+			break;
 #endif	/* SK_USE_CSUM */
 		default :
-			SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_Q_E002,
-				SKERR_Q_E002MSG) ;
+			SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_Q_E002, SKERR_Q_E002MSG);
 			Rtv = 0;
 		}
 
 		if (Rtv != 0) {
-			return(Rtv) ;
+			return(Rtv);
 		}
 
 		if (++pEv == &pAC->Event.EvQueue[SK_MAX_EVENT])
-			pEv = pAC->Event.EvQueue ;
+			pEv = pAC->Event.EvQueue;
 
 		/* Renew get: it is used in queue_events to detect overruns */
 		pAC->Event.EvGet = pEv;
 	}
 
-	return(0) ;
+	return(0);
 }
 
 /* End of file */