Commit e9d59922 authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman

Staging: remove sxg driver

Unfortunatly, the upstream company has abandonded development of this
driver.  So it's best to just remove the driver from the tree.

Cc: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 0b33559a
...@@ -45,8 +45,6 @@ source "drivers/staging/et131x/Kconfig" ...@@ -45,8 +45,6 @@ source "drivers/staging/et131x/Kconfig"
source "drivers/staging/slicoss/Kconfig" source "drivers/staging/slicoss/Kconfig"
source "drivers/staging/sxg/Kconfig"
source "drivers/staging/go7007/Kconfig" source "drivers/staging/go7007/Kconfig"
source "drivers/staging/usbip/Kconfig" source "drivers/staging/usbip/Kconfig"
......
...@@ -5,7 +5,6 @@ obj-$(CONFIG_STAGING) += staging.o ...@@ -5,7 +5,6 @@ obj-$(CONFIG_STAGING) += staging.o
obj-$(CONFIG_ET131X) += et131x/ obj-$(CONFIG_ET131X) += et131x/
obj-$(CONFIG_SLICOSS) += slicoss/ obj-$(CONFIG_SLICOSS) += slicoss/
obj-$(CONFIG_SXG) += sxg/
obj-$(CONFIG_VIDEO_GO7007) += go7007/ obj-$(CONFIG_VIDEO_GO7007) += go7007/
obj-$(CONFIG_USB_IP_COMMON) += usbip/ obj-$(CONFIG_USB_IP_COMMON) += usbip/
obj-$(CONFIG_W35UND) += winbond/ obj-$(CONFIG_W35UND) += winbond/
......
config SXG
tristate "Alacritech SLIC Technology Non-Accelerated 10Gbe support"
depends on PCI && NETDEV_10000
depends on X86
default n
help
This driver supports the Alacritech SLIC Technology Non-Accelerated
10Gbe network cards.
To compile this driver as a module, choose
M here: the module will be called sxg_nic.
obj-$(CONFIG_SXG) += sxg_nic.o
sxg_nic-y := sxg.o sxg_ethtool.o
This is the rough cut at a driver for the Alacritech SLIC Technology
Non-Accelerated 10Gbe network driver.
TODO:
- remove wrappers
- checkpatch.pl cleanups
- new functionality that the card needs
- remove reliance on x86
Please send patches to:
Greg Kroah-Hartman <gregkh@suse.de>
for any cleanups that you do to this driver.
This source diff could not be displayed because it is too large. You can view the blob instead.
This diff is collapsed.
This diff is collapsed.
/**************************************************************************
*
* Copyright (C) 2000-2008 Alacritech, Inc. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY ALACRITECH, INC. ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ALACRITECH, INC. OR
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* The views and conclusions contained in the software and documentation
* are those of the authors and should not be interpreted as representing
* official policies, either expressed or implied, of Alacritech, Inc.
*
**************************************************************************/
/*
* FILENAME: sxg_os.h
*
* These are the Linux-specific definitions required for the SLICOSS
* driver, which should allow for greater portability to other OSes.
*/
#ifndef _SLIC_OS_SPECIFIC_H_
#define _SLIC_OS_SPECIFIC_H_
#define FALSE (0)
#define TRUE (1)
struct list_entry {
struct list_entry *nle_flink;
struct list_entry *nle_blink;
};
#define InitializeListHead(l) \
(l)->nle_flink = (l)->nle_blink = (l)
#define IsListEmpty(h) \
((h)->nle_flink == (h))
#define RemoveEntryList(e) \
do { \
list_entry *b; \
list_entry *f; \
\
f = (e)->nle_flink; \
b = (e)->nle_blink; \
b->nle_flink = f; \
f->nle_blink = b; \
} while (0)
/* These two have to be inlined since they return things. */
static inline struct list_entry *RemoveHeadList(struct list_entry *l)
{
struct list_entry *f;
struct list_entry *e;
e = l->nle_flink;
f = e->nle_flink;
l->nle_flink = f;
f->nle_blink = l;
return (e);
}
static inline struct list_entry *RemoveTailList(struct list_entry *l)
{
struct list_entry *b;
struct list_entry *e;
e = l->nle_blink;
b = e->nle_blink;
l->nle_blink = b;
b->nle_flink = l;
return (e);
}
#define InsertTailList(l, e) \
do { \
struct list_entry *b; \
\
b = (l)->nle_blink; \
(e)->nle_flink = (l); \
(e)->nle_blink = b; \
b->nle_flink = (e); \
(l)->nle_blink = (e); \
} while (0)
#define InsertHeadList(l, e) \
do { \
struct list_entry *f; \
\
f = (l)->nle_flink; \
(e)->nle_flink = f; \
(e)->nle_blink = l; \
f->nle_blink = (e); \
(l)->nle_flink = (e); \
} while (0)
#define ATK_DEBUG 1
#if ATK_DEBUG
#define SLIC_TIMESTAMP(value) { \
struct timeval timev; \
do_gettimeofday(&timev); \
value = timev.tv_sec*1000000 + timev.tv_usec; \
}
#else
#define SLIC_TIMESTAMP(value)
#endif
/* SXG DEFINES */
#ifdef ATKDBG
#define SXG_TIMESTAMP(value) { \
struct timeval timev; \
do_gettimeofday(&timev); \
value = timev.tv_sec*1000000 + timev.tv_usec; \
}
#else
#define SXG_TIMESTAMP(value)
#endif
#define WRITE_REG(reg,value,flush) \
sxg_reg32_write((&reg), (value), (flush))
#define WRITE_REG64(a,reg,value,cpu) \
sxg_reg64_write((a),(&reg),(value),(cpu))
#define READ_REG(reg,value) (value) = readl((void __iomem *)(&reg))
#endif /* _SLIC_OS_SPECIFIC_H_ */
/**************************************************************************
*
* Copyright © 2000-2008 Alacritech, Inc. All rights reserved.
*
* $Id: sxgdbg.h,v 1.1 2008/06/27 12:49:28 mook Exp $
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY ALACRITECH, INC. ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ALACRITECH, INC. OR
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* The views and conclusions contained in the software and documentation
* are those of the authors and should not be interpreted as representing
* official policies, either expressed or implied, of Alacritech, Inc.
*
**************************************************************************/
/*
* FILENAME: sxgdbg.h
*
* All debug and assertion-based definitions and macros are included
* in this file for the SXGOSS driver.
*/
#ifndef _SXG_DEBUG_H_
#define _SXG_DEBUG_H_
#define ATKDBG 1
#define ATK_TRACE_ENABLED 0
#define DBG_ERROR(n, args...) printk(KERN_WARNING n, ##args)
#ifdef ASSERT
#undef ASSERT
#endif
#define SXG_ASSERT_ENABLED
#ifdef SXG_ASSERT_ENABLED
#ifndef ASSERT
#define ASSERT(a) \
{ \
if (!(a)) { \
DBG_ERROR("ASSERT() Failure: file %s, function %s line %d\n", \
__FILE__, __func__, __LINE__); \
} \
}
#endif
#else
#ifndef ASSERT
#define ASSERT(a)
#endif
#endif /* SXG_ASSERT_ENABLED */
#ifdef ATKDBG
/*
* Global for timer granularity; every driver must have an instance
* of this initialized to 0
*/
extern ulong ATKTimerDiv;
/*
* trace_entry -
*
* This structure defines an entry in the trace buffer. The
* first few fields mean the same from entry to entry, while
* the meaning of last several fields change to suit the
* needs of the trace entry. Typically they are function call
* parameters.
*/
struct trace_entry {
char name[8];/* 8 character name - like 's'i'm'b'a'r'c'v' */
u32 time; /* Current clock tic */
unsigned char cpu; /* Current CPU */
unsigned char irql; /* Current IRQL */
unsigned char driver;/* The driver which added the trace call */
/* pad to 4 byte boundary - will probably get used */
unsigned char pad2;
u32 arg1; /* Caller arg1 */
u32 arg2; /* Caller arg2 */
u32 arg3; /* Caller arg3 */
u32 arg4; /* Caller arg4 */
};
/* Driver types for driver field in struct trace_entry */
#define TRACE_SXG 1
#define TRACE_VPCI 2
#define TRACE_SLIC 3
#define TRACE_ENTRIES 1024
struct sxg_trace_buffer {
/* aid for windbg extension */
unsigned int size;
unsigned int in; /* Where to add */
unsigned int level; /* Current Trace level */
spinlock_t lock; /* For MP tracing */
struct trace_entry entries[TRACE_ENTRIES];/* The circular buffer */
};
/*
* The trace levels
*
* XXX At the moment I am only defining critical, important, and noisy.
* I am leaving room for more if anyone wants them.
*/
#define TRACE_NONE 0 /* For trace level - if no tracing wanted */
#define TRACE_CRITICAL 1 /* minimal tracing - only critical stuff */
#define TRACE_IMPORTANT 5 /* more tracing - anything important */
#define TRACE_NOISY 10 /* Everything in the world */
/* The macros themselves */
#if ATK_TRACE_ENABLED
#define SXG_TRACE_INIT(buffer, tlevel) \
{ \
memset((buffer), 0, sizeof(struct sxg_trace_buffer)); \
(buffer)->level = (tlevel); \
(buffer)->size = TRACE_ENTRIES; \
spin_lock_init(&(buffer)->lock); \
}
#else
#define SXG_TRACE_INIT(buffer, tlevel)
#endif
/*The trace macro. This is active only if ATK_TRACE_ENABLED is set. */
#if ATK_TRACE_ENABLED
#define SXG_TRACE(tdriver, buffer, tlevel, tname, a1, a2, a3, a4) { \
if ((buffer) && ((buffer)->level >= (tlevel))) { \
unsigned int trace_irql = 0;/* ?????? FIX THIS */\
unsigned int trace_len; \
struct trace_entry *trace_entry; \
struct timeval timev; \
if(spin_trylock(&(buffer)->lock)) { \
trace_entry = &(buffer)->entries[(buffer)->in]; \
do_gettimeofday(&timev); \
\
memset(trace_entry->name, 0, 8); \
trace_len = strlen(tname); \
trace_len = trace_len > 8 ? 8 : trace_len; \
memcpy(trace_entry->name, (tname), trace_len); \
trace_entry->time = timev.tv_usec; \
trace_entry->cpu = (unsigned char)(smp_processor_id() & 0xFF);\
trace_entry->driver = (tdriver); \
trace_entry->irql = trace_irql; \
trace_entry->arg1 = (ulong)(a1); \
trace_entry->arg2 = (ulong)(a2); \
trace_entry->arg3 = (ulong)(a3); \
trace_entry->arg4 = (ulong)(a4); \
\
(buffer)->in++; \
if ((buffer)->in == TRACE_ENTRIES) \
(buffer)->in = 0; \
\
spin_unlock(&(buffer)->lock); \
} \
} \
}
#else
#define SXG_TRACE(tdriver, buffer, tlevel, tname, a1, a2, a3, a4)
#endif
#endif
#endif /* _SXG_DEBUG_H_ */
This diff is collapsed.
This diff is collapsed.
/*
* Copyright ? 1997-2008 Alacritech, Inc. All rights reserved
*
* $Id: sxgphycode.h,v 1.2 2008/10/02 01:44:07 Exp $
*
* sxgphycode.h:
*
* This file PHY microcode and register initialization data.
*/
/**********************************************************************
* PHY Microcode
**********************************************************************/
//
// The following contains both PHY microcode and PHY register
// initialization data. It is specific to both the PHY and the
// type of transceiver.
//
// Download for AEL2005C PHY with SR/LR transceiver (10GBASE-SR or 10GBASE-LR)
// AEL2005 SR firmware rev 18 (microInit_mdio_SR_AEL2005C_18.tx).
static struct phy_ucode PhyUcode[] = {
// NOTE: An address of 0 is a special case. When the download routine
// sees an address of 0, it does not write to the PHY. Instead, it delays
// the download. The length of the delay (in ms) is given in the data field.
// Delays are required at certain points.
// Platform-specific MDIO Patches:
// (include patches for 10G RX polarity flip, 50Mhz Synth, etc)
// Addr Data
{0xc017, 0xfeb0}, // flip RX_LOS polarity (mandatory patch for SFP+ applications)
{0xC001, 0x0428}, // flip RX serial polarity
{0xc013, 0xf341}, // invert lxmit clock (mandatory patch)
{0xc210, 0x8000}, // reset datapath (mandatory patch)
{0xc210, 0x8100}, // reset datapath (mandatory patch)
{0xc210, 0x8000}, // reset datapath (mandatory patch)
{0xc210, 0x0000}, // reset datapath (mandatory patch)
{0x0000, 0x0032}, // wait for 50ms for datapath reset to complete. (mandatory patch)
// Transceiver-specific MDIO Patches:
{0xc003, 0x0181}, // (bit 7) enable the CDR inc setting in 1.C005 (mandatory patch for SR code)
{0xc010, 0x448a}, // (bit 14) mask out high BER input from the LOS signal in 1.000A (mandatory patch for SR code)
// Transceiver-specific Microcontroller Initialization:
{0xc04a, 0x5200}, // activate microcontroller and pause
{0x0000, 0x0032}, // wait 50ms for microcontroller before writing in code.
// code block starts here:
{0xcc00, 0x2ff4}, {0xcc01, 0x3cd4}, {0xcc02, 0x2015}, {0xcc03, 0x3125},
{0xcc04, 0x6524}, {0xcc05, 0x27ff}, {0xcc06, 0x300f}, {0xcc07, 0x2c8b},
{0xcc08, 0x300b}, {0xcc09, 0x4009}, {0xcc0a, 0x400e}, {0xcc0b, 0x2f12},
{0xcc0c, 0x3002}, {0xcc0d, 0x1002}, {0xcc0e, 0x2112}, {0xcc0f, 0x3012},
{0xcc10, 0x1002}, {0xcc11, 0x2572}, {0xcc12, 0x3012}, {0xcc13, 0x1002},
{0xcc14, 0xd01e}, {0xcc15, 0x2772}, {0xcc16, 0x3012}, {0xcc17, 0x1002},
{0xcc18, 0x2004}, {0xcc19, 0x3c84}, {0xcc1a, 0x6436}, {0xcc1b, 0x2007},
{0xcc1c, 0x3f87}, {0xcc1d, 0x8676}, {0xcc1e, 0x40b7}, {0xcc1f, 0xa746},
{0xcc20, 0x4047}, {0xcc21, 0x5673}, {0xcc22, 0x2982}, {0xcc23, 0x3002},
{0xcc24, 0x13d2}, {0xcc25, 0x8bbd}, {0xcc26, 0x2802}, {0xcc27, 0x3012},
{0xcc28, 0x1002}, {0xcc29, 0x2032}, {0xcc2a, 0x3012}, {0xcc2b, 0x1002},
{0xcc2c, 0x5cc3}, {0xcc2d, 0x0314}, {0xcc2e, 0x2942}, {0xcc2f, 0x3002},
{0xcc30, 0x1002}, {0xcc31, 0xd019}, {0xcc32, 0x2fd2}, {0xcc33, 0x3002},
{0xcc34, 0x1002}, {0xcc35, 0x2a04}, {0xcc36, 0x3c74}, {0xcc37, 0x6435},
{0xcc38, 0x2fa4}, {0xcc39, 0x3cd4}, {0xcc3a, 0x6624}, {0xcc3b, 0x5563},
{0xcc3c, 0x2d42}, {0xcc3d, 0x3002}, {0xcc3e, 0x13d2}, {0xcc3f, 0x464d},
{0xcc40, 0x2802}, {0xcc41, 0x3012}, {0xcc42, 0x1002}, {0xcc43, 0x2fd2},
{0xcc44, 0x3002}, {0xcc45, 0x1002}, {0xcc46, 0x2fb4}, {0xcc47, 0x3cd4},
{0xcc48, 0x6624}, {0xcc49, 0x5563}, {0xcc4a, 0x2d42}, {0xcc4b, 0x3002},
{0xcc4c, 0x13d2}, {0xcc4d, 0x2e72}, {0xcc4e, 0x3002}, {0xcc4f, 0x1002},
{0xcc50, 0x2f72}, {0xcc51, 0x3002}, {0xcc52, 0x1002}, {0xcc53, 0x0004},
{0xcc54, 0x2942}, {0xcc55, 0x3002}, {0xcc56, 0x1002}, {0xcc57, 0x2032},
{0xcc58, 0x3012}, {0xcc59, 0x1002}, {0xcc5a, 0x5cc3}, {0xcc5b, 0x0317},
{0xcc5c, 0x2f12}, {0xcc5d, 0x3002}, {0xcc5e, 0x1002}, {0xcc5f, 0x2942},
{0xcc60, 0x3002}, {0xcc61, 0x1002}, {0xcc62, 0x22cd}, {0xcc63, 0x301d},
{0xcc64, 0x2802}, {0xcc65, 0x3012}, {0xcc66, 0x1002}, {0xcc67, 0x20b2},
{0xcc68, 0x3012}, {0xcc69, 0x1002}, {0xcc6a, 0x5aa3}, {0xcc6b, 0x2dc2},
{0xcc6c, 0x3002}, {0xcc6d, 0x1312}, {0xcc6e, 0x2d02}, {0xcc6f, 0x3002},
{0xcc70, 0x1002}, {0xcc71, 0x2807}, {0xcc72, 0x31a7}, {0xcc73, 0x20c4},
{0xcc74, 0x3c24}, {0xcc75, 0x6724}, {0xcc76, 0x1002}, {0xcc77, 0x2807},
{0xcc78, 0x3187}, {0xcc79, 0x20c4}, {0xcc7a, 0x3c24}, {0xcc7b, 0x6724},
{0xcc7c, 0x1002}, {0xcc7d, 0x2514}, {0xcc7e, 0x3c64}, {0xcc7f, 0x6436},
{0xcc80, 0xdff4}, {0xcc81, 0x6436}, {0xcc82, 0x1002}, {0xcc83, 0x40a4},
{0xcc84, 0x643c}, {0xcc85, 0x4016}, {0xcc86, 0x8c6c}, {0xcc87, 0x2b24},
{0xcc88, 0x3c24}, {0xcc89, 0x6435}, {0xcc8a, 0x1002}, {0xcc8b, 0x2b24},
{0xcc8c, 0x3c24}, {0xcc8d, 0x643a}, {0xcc8e, 0x4025}, {0xcc8f, 0x8a5a},
{0xcc90, 0x1002}, {0xcc91, 0x26d1}, {0xcc92, 0x3011}, {0xcc93, 0x1001},
{0xcc94, 0xc7a0}, {0xcc95, 0x0100}, {0xcc96, 0xc502}, {0xcc97, 0x53ac},
{0xcc98, 0xc503}, {0xcc99, 0xd5d5}, {0xcc9a, 0xc600}, {0xcc9b, 0x2a6d},
{0xcc9c, 0xc601}, {0xcc9d, 0x2a4c}, {0xcc9e, 0xc602}, {0xcc9f, 0x0111},
{0xcca0, 0xc60c}, {0xcca1, 0x5900}, {0xcca2, 0xc710}, {0xcca3, 0x0700},
{0xcca4, 0xc718}, {0xcca5, 0x0700}, {0xcca6, 0xc720}, {0xcca7, 0x4700},
{0xcca8, 0xc801}, {0xcca9, 0x7f50}, {0xccaa, 0xc802}, {0xccab, 0x7760},
{0xccac, 0xc803}, {0xccad, 0x7fce}, {0xccae, 0xc804}, {0xccaf, 0x5700},
{0xccb0, 0xc805}, {0xccb1, 0x5f11}, {0xccb2, 0xc806}, {0xccb3, 0x4751},
{0xccb4, 0xc807}, {0xccb5, 0x57e1}, {0xccb6, 0xc808}, {0xccb7, 0x2700},
{0xccb8, 0xc809}, {0xccb9, 0x0000}, {0xccba, 0xc821}, {0xccbb, 0x0002},
{0xccbc, 0xc822}, {0xccbd, 0x0014}, {0xccbe, 0xc832}, {0xccbf, 0x1186},
{0xccc0, 0xc847}, {0xccc1, 0x1e02}, {0xccc2, 0xc013}, {0xccc3, 0xf341},
{0xccc4, 0xc01a}, {0xccc5, 0x0446}, {0xccc6, 0xc024}, {0xccc7, 0x1000},
{0xccc8, 0xc025}, {0xccc9, 0x0a00}, {0xccca, 0xc026}, {0xcccb, 0x0c0c},
{0xcccc, 0xc027}, {0xcccd, 0x0c0c}, {0xccce, 0xc029}, {0xcccf, 0x00a0},
{0xccd0, 0xc030}, {0xccd1, 0x0a00}, {0xccd2, 0xc03c}, {0xccd3, 0x001c},
{0xccd4, 0xc005}, {0xccd5, 0x7a06}, {0xccd6, 0x0000}, {0xccd7, 0x26d1},
{0xccd8, 0x3011}, {0xccd9, 0x1001}, {0xccda, 0xc620}, {0xccdb, 0x0000},
{0xccdc, 0xc621}, {0xccdd, 0x003f}, {0xccde, 0xc622}, {0xccdf, 0x0000},
{0xcce0, 0xc623}, {0xcce1, 0x0000}, {0xcce2, 0xc624}, {0xcce3, 0x0000},
{0xcce4, 0xc625}, {0xcce5, 0x0000}, {0xcce6, 0xc627}, {0xcce7, 0x0000},
{0xcce8, 0xc628}, {0xcce9, 0x0000}, {0xccea, 0xc62c}, {0xcceb, 0x0000},
{0xccec, 0x0000}, {0xcced, 0x2806}, {0xccee, 0x3cb6}, {0xccef, 0xc161},
{0xccf0, 0x6134}, {0xccf1, 0x6135}, {0xccf2, 0x5443}, {0xccf3, 0x0303},
{0xccf4, 0x6524}, {0xccf5, 0x000b}, {0xccf6, 0x1002}, {0xccf7, 0x2104},
{0xccf8, 0x3c24}, {0xccf9, 0x2105}, {0xccfa, 0x3805}, {0xccfb, 0x6524},
{0xccfc, 0xdff4}, {0xccfd, 0x4005}, {0xccfe, 0x6524}, {0xccff, 0x1002},
{0xcd00, 0x5dd3}, {0xcd01, 0x0306}, {0xcd02, 0x2ff7}, {0xcd03, 0x38f7},
{0xcd04, 0x60b7}, {0xcd05, 0xdffd}, {0xcd06, 0x000a}, {0xcd07, 0x1002},
{0xcd08, 0x0000},
// end of code block
// Unpause the microcontroller to start program
{0xca00, 0x0080},
{0xca12, 0x0000},
{0x0000, 0x000A}, // wait 10ms just to be safe
// Configure the LED's
{0xc214, 0x0099}, // configure the LED drivers (for Sahara rev B)
{0xc216, 0x0400}, // configure the one LED
{0xc217, 0x0000}, // don't drive the 2nd LED (if it exists)
{0xffff, 0xffff} // table terminator
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment