Merge tag 'usb-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/Thunderbolt updates from Greg KH:
 "Here is the large set of USB and Thunderbolt patches for 5.9-rc1.

  Nothing really magic/major in here, just lots of little changes and
  updates:

   - clean up language usages in USB core and some drivers

   - Thunderbolt driver updates and additions

   - USB Gadget driver updates

   - dwc3 driver updates (like always...)

   - build with "W=1" warning fixups

   - mtu3 driver updates

   - usb-serial driver updates and device ids

   - typec additions and updates for new hardware

   - xhci debug code updates for future platforms

   - cdns3 driver updates

   - lots of other minor driver updates and fixes and cleanups

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (330 commits)
  usb: common: usb-conn-gpio: Register charger
  usb: mtu3: simplify mtu3_req_complete()
  usb: mtu3: clear dual mode of u3port when disable device
  usb: mtu3: use MTU3_EP_WEDGE flag
  usb: mtu3: remove useless member @busy in mtu3_ep struct
  usb: mtu3: remove repeated error log
  usb: mtu3: add ->udc_set_speed()
  usb: mtu3: introduce a funtion to check maximum speed
  usb: mtu3: clear interrupts status when disable interrupts
  usb: mtu3: reinitialize CSR registers
  usb: mtu3: fix macro for maximum number of packets
  usb: mtu3: remove unnecessary pointer checks
  usb: xhci: Fix ASMedia ASM1142 DMA addressing
  usb: xhci: define IDs for various ASMedia host controllers
  usb: musb: convert to devm_platform_ioremap_resource_byname
  usb: gadget: tegra-xudc: convert to devm_platform_ioremap_resource_byname
  usb: gadget: r8a66597: convert to devm_platform_ioremap_resource_byname
  usb: dwc3: convert to devm_platform_ioremap_resource_byname
  usb: cdns3: convert to devm_platform_ioremap_resource_byname
  usb: phy: am335x: convert to devm_platform_ioremap_resource_byname
  ...

Documentation/ABI/testing/sysfs-bus-thunderbolt

@@ -178,11 +178,18 @@ KernelVersion:	4.13
 Contact:	thunderbolt-software@lists.01.org
 Description:	When new NVM image is written to the non-active NVM
 		area (through non_activeX NVMem device), the
-		authentication procedure is started by writing 1 to
-		this file. If everything goes well, the device is
+		authentication procedure is started by writing to
+		this file.
+		If everything goes well, the device is
 		restarted with the new NVM firmware. If the image
 		verification fails an error code is returned instead.
 
+		This file will accept writing values "1" or "2"
+		- Writing "1" will flush the image to the storage
+		area and authenticate the image in one action.
+		- Writing "2" will run some basic validation on the image
+		and flush it to the storage area.
+
 		When read holds status of the last authentication
 		operation if an error occurred during the process. This
 		is directly the status value from the DMA configuration
@@ -236,3 +243,49 @@ KernelVersion:	4.15
 Contact:	thunderbolt-software@lists.01.org
 Description:	This contains XDomain service specific settings as
 		bitmask. Format: %x
+
+What:		/sys/bus/thunderbolt/devices/<device>:<port>.<index>/device
+Date:		Oct 2020
+KernelVersion:	v5.9
+Contact:	Mika Westerberg <mika.westerberg@linux.intel.com>
+Description:	Retimer device identifier read from the hardware.
+
+What:		/sys/bus/thunderbolt/devices/<device>:<port>.<index>/nvm_authenticate
+Date:		Oct 2020
+KernelVersion:	v5.9
+Contact:	Mika Westerberg <mika.westerberg@linux.intel.com>
+Description:	When new NVM image is written to the non-active NVM
+		area (through non_activeX NVMem device), the
+		authentication procedure is started by writing 1 to
+		this file. If everything goes well, the device is
+		restarted with the new NVM firmware. If the image
+		verification fails an error code is returned instead.
+
+		When read holds status of the last authentication
+		operation if an error occurred during the process.
+		Format: %x.
+
+What:		/sys/bus/thunderbolt/devices/<device>:<port>.<index>/nvm_version
+Date:		Oct 2020
+KernelVersion:	v5.9
+Contact:	Mika Westerberg <mika.westerberg@linux.intel.com>
+Description:	Holds retimer NVM version number. Format: %x.%x, major.minor.
+
+What:		/sys/bus/thunderbolt/devices/<device>:<port>.<index>/vendor
+Date:		Oct 2020
+KernelVersion:	v5.9
+Contact:	Mika Westerberg <mika.westerberg@linux.intel.com>
+Description:	Retimer vendor identifier read from the hardware.
+
+What:		/sys/bus/thunderbolt/devices/.../nvm_authenticate_on_disconnect
+Date:		Oct 2020
+KernelVersion:	v5.9
+Contact:	Mario Limonciello <mario.limonciello@dell.com>
+Description:	For supported devices, automatically authenticate the new Thunderbolt
+		image when the device is disconnected from the host system.
+
+		This file will accept writing values "1" or "2"
+		- Writing "1" will flush the image to the storage
+		area and prepare the device for authentication on disconnect.
+		- Writing "2" will run some basic validation on the image
+		and flush it to the storage area.

Documentation/admin-guide/thunderbolt.rst

@@ -173,8 +173,8 @@ following ``udev`` rule::
 
   ACTION=="add", SUBSYSTEM=="thunderbolt", ATTRS{iommu_dma_protection}=="1", ATTR{authorized}=="0", ATTR{authorized}="1"
 
-Upgrading NVM on Thunderbolt device or host
--------------------------------------------
+Upgrading NVM on Thunderbolt device, host or retimer
+----------------------------------------------------
 Since most of the functionality is handled in firmware running on a
 host controller or a device, it is important that the firmware can be
 upgraded to the latest where possible bugs in it have been fixed.
@@ -185,9 +185,10 @@ for some machines:
 
   `Thunderbolt Updates <https://thunderbolttechnology.net/updates>`_
 
-Before you upgrade firmware on a device or host, please make sure it is a
-suitable upgrade. Failing to do that may render the device (or host) in a
-state where it cannot be used properly anymore without special tools!
+Before you upgrade firmware on a device, host or retimer, please make
+sure it is a suitable upgrade. Failing to do that may render the device
+in a state where it cannot be used properly anymore without special
+tools!
 
 Host NVM upgrade on Apple Macs is not supported.
 

Documentation/devicetree/bindings/usb/brcm,bdc.txt

@@ -4,7 +4,7 @@ Broadcom USB Device Controller (BDC)
 Required properties:
 
 - compatible: must be one of:
-                "brcm,bdc-v0.16"
+                "brcm,bdc-udc-v2"
                 "brcm,bdc"
 - reg: the base register address and length
 - interrupts: the interrupt line for this controller
@@ -21,7 +21,7 @@ On Broadcom STB platforms, these properties are required:
 Example:
 
         bdc@f0b02000 {
-                compatible = "brcm,bdc-v0.16";
+                compatible = "brcm,bdc-udc-v2";
                 reg = <0xf0b02000 0xfc4>;
                 interrupts = <0x0 0x60 0x0>;
                 phys = <&usbphy_0 0x0>;

Documentation/devicetree/bindings/usb/ingenic,jz4770-phy.yaml

@@ -4,10 +4,11 @@
 $id: http://devicetree.org/schemas/usb/ingenic,jz4770-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic JZ4770 USB PHY devicetree bindings
+title: Ingenic SoCs USB PHY devicetree bindings
 
 maintainers:
   - Paul Cercueil <paul@crapouillou.net>
+  - 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
 
 properties:
   $nodename:
@@ -16,6 +17,9 @@ properties:
   compatible:
     enum:
       - ingenic,jz4770-phy
+      - ingenic,jz4780-phy
+      - ingenic,x1000-phy
+      - ingenic,x1830-phy
 
   reg:
     maxItems: 1

Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml

@@ -11,22 +11,36 @@ maintainers:
 
 properties:
   compatible:
-    oneOf:
-      - const: "ti,keystone-dwc3"
-      - const: "ti,am654-dwc3"
+    items:
+      - enum:
+        - ti,keystone-dwc3
+        - ti,am654-dwc3
 
   reg:
     maxItems: 1
-    description: Address and length of the register set for the USB subsystem on
-      the SOC.
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  ranges: true
 
   interrupts:
     maxItems: 1
-    description: The irq number of this device that is used to interrupt the MPU.
-
 
   clocks:
-    description: Clock ID for USB functional clock.
+    minItems: 1
+    maxItems: 2
+
+  assigned-clocks:
+    minItems: 1
+    maxItems: 2
+
+  assigned-clock-parents:
+    minItems: 1
+    maxItems: 2
 
   power-domains:
     description: Should contain a phandle to a PM domain provider node
@@ -42,33 +56,42 @@ properties:
 
   phy-names:
     items:
-      - const: "usb3-phy"
+      - const: usb3-phy
+
+  dma-coherent: true
 
-  dwc3:
+  dma-ranges: true
+
+patternProperties:
+  "usb@[a-f0-9]+$":
+    type: object
     description: This is the node representing the DWC3 controller instance
       Documentation/devicetree/bindings/usb/dwc3.txt
 
 required:
   - compatible
   - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
   - interrupts
-  - clocks
+
+additionalProperties: false
 
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-    usb: usb@2680000 {
+    dwc3@2680000 {
       compatible = "ti,keystone-dwc3";
       #address-cells = <1>;
       #size-cells = <1>;
       reg = <0x2680000 0x10000>;
       clocks = <&clkusb>;
-      clock-names = "usb";
       interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
       ranges;
 
-      dwc3@2690000 {
+      usb@2690000 {
         compatible = "synopsys,dwc3";
         reg = <0x2690000 0x70000>;
         interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;

Documentation/driver-api/usb/URB.rst

@@ -240,7 +240,7 @@ How to do isochronous (ISO) transfers?
 ======================================
 
 Besides the fields present on a bulk transfer, for ISO, you also
-also have to set ``urb->interval`` to say how often to make transfers; it's
+have to set ``urb->interval`` to say how often to make transfers; it's
 often one per frame (which is once every microframe for highspeed devices).
 The actual interval used will be a power of two that's no bigger than what
 you specify. You can use the :c:func:`usb_fill_int_urb` macro to fill

Documentation/usb/gadget_hid.rst

@@ -11,7 +11,7 @@ and HID reports can be sent/received through I/O on the
 /dev/hidgX character devices.
 
 For more details about HID, see the developer page on
-http://www.usb.org/developers/hidpage/
+https://www.usb.org/developers/hidpage/
 
 Configuration
 =============

Documentation/usb/gadget_multi.rst

@@ -142,7 +142,7 @@ Footnotes
 =========
 
 [1] Remote Network Driver Interface Specification,
-[[http://msdn.microsoft.com/en-us/library/ee484414.aspx]].
+[[https://msdn.microsoft.com/en-us/library/ee484414.aspx]].
 
 [2] Communications Device Class Abstract Control Model, spec for this
 and other USB classes can be found at
@@ -150,9 +150,9 @@ and other USB classes can be found at
 
 [3] CDC Ethernet Control Model.
 
-[4] [[http://msdn.microsoft.com/en-us/library/ff537109(v=VS.85).aspx]]
+[4] [[https://msdn.microsoft.com/en-us/library/ff537109(v=VS.85).aspx]]
 
-[5] [[http://msdn.microsoft.com/en-us/library/ff539234(v=VS.85).aspx]]
+[5] [[https://msdn.microsoft.com/en-us/library/ff539234(v=VS.85).aspx]]
 
 [6] To put it in some other nice words, Windows failed to respond to
 any user input.
@@ -160,6 +160,6 @@ any user input.
 [7] You may find [[http://www.cygnal.org/ubb/Forum9/HTML/001050.html]]
 useful.
 
-[8] http://www.nirsoft.net/utils/usb_devices_view.html
+[8] https://www.nirsoft.net/utils/usb_devices_view.html
 
-[9] [[http://msdn.microsoft.com/en-us/library/ff570620.aspx]]
+[9] [[https://msdn.microsoft.com/en-us/library/ff570620.aspx]]

Documentation/usb/linux.inf

 ; Based on template INF file found at
-;    <http://msdn.microsoft.com/en-us/library/ff570620.aspx>
+;    <https://msdn.microsoft.com/en-us/library/ff570620.aspx>
 ; which was:
 ;    Copyright (c) Microsoft Corporation
 ; and released under the MLPL as found at:

MAINTAINERS

@@ -7013,6 +7013,13 @@ L:	linuxppc-dev@lists.ozlabs.org
 S:	Maintained
 F:	drivers/usb/gadget/udc/fsl*
 
+FREESCALE USB PHY DRIVER
+M:	Ran Wang <ran.wang_1@nxp.com>
+L:	linux-usb@vger.kernel.org
+L:	linuxppc-dev@lists.ozlabs.org
+S:	Maintained
+F:	drivers/usb/phy/phy-fsl-usb*
+
 FREEVXFS FILESYSTEM
 M:	Christoph Hellwig <hch@infradead.org>
 S:	Maintained

arch/arm/mach-omap1/board-osk.c

@@ -26,6 +26,7 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -55,6 +56,9 @@
 
 #include "common.h"
 
+/* Name of the GPIO chip used by the OMAP for GPIOs 0..15 */
+#define OMAP_GPIO_LABEL		"gpio-0-15"
+
 /* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
 #define OMAP_OSK_ETHR_START		0x04800300
 
@@ -240,7 +244,9 @@ static struct tps65010_board tps_board = {
 
 static struct i2c_board_info __initdata osk_i2c_board_info[] = {
 	{
+		/* This device will get the name "i2c-tps65010" */
 		I2C_BOARD_INFO("tps65010", 0x48),
+		.dev_name = "tps65010",
 		.platform_data	= &tps_board,
 
 	},
@@ -278,6 +284,16 @@ static void __init osk_init_cf(void)
 	irq_set_irq_type(gpio_to_irq(62), IRQ_TYPE_EDGE_FALLING);
 }
 
+static struct gpiod_lookup_table osk_usb_gpio_table = {
+	.dev_id = "ohci",
+	.table = {
+		/* Power GPIO on the I2C-attached TPS65010 */
+		GPIO_LOOKUP("i2c-tps65010", 1, "power", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP(OMAP_GPIO_LABEL, 9, "overcurrent",
+			    GPIO_ACTIVE_HIGH),
+	},
+};
+
 static struct omap_usb_config osk_usb_config __initdata = {
 	/* has usb host connector (A) ... for development it can also
 	 * be used, with a NONSTANDARD gender-bending cable/dongle, as
@@ -581,6 +597,7 @@ static void __init osk_init(void)
 	l |= (3 << 1);
 	omap_writel(l, USB_TRANSCEIVER_CTRL);
 
+	gpiod_add_lookup_table(&osk_usb_gpio_table);
 	omap1_usb_init(&osk_usb_config);
 
 	/* irq for tps65010 chip */

arch/mips/configs/fuloong2e_defconfig

@@ -159,7 +159,7 @@ CONFIG_USB_KBD=y
 CONFIG_USB_MOUSE=y
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_OTG_WHITELIST=y
+CONFIG_USB_OTG_PRODUCTLIST=y
 CONFIG_USB_WUSB_CBAF=m
 CONFIG_USB_C67X00_HCD=m
 CONFIG_USB_EHCI_HCD=y

arch/mips/configs/gcw0_defconfig

@@ -96,7 +96,7 @@ CONFIG_SND_SIMPLE_CARD=y
 CONFIG_USB_CONN_GPIO=y
 CONFIG_USB=y
 CONFIG_USB_OTG=y
-CONFIG_USB_OTG_BLACKLIST_HUB=y
+CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PLATFORM=y
 CONFIG_USB_MUSB_HDRC=y

arch/mips/configs/lemote2f_defconfig

@@ -207,7 +207,7 @@ CONFIG_ZEROPLUS_FF=y
 CONFIG_USB_HIDDEV=y
 CONFIG_USB=y
 CONFIG_USB_DYNAMIC_MINORS=y
-CONFIG_USB_OTG_WHITELIST=y
+CONFIG_USB_OTG_PRODUCTLIST=y
 CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y

drivers/net/thunderbolt.c

@@ -866,8 +866,8 @@ static int tbnet_open(struct net_device *dev)
 	eof_mask = BIT(TBIP_PDF_FRAME_END);
 
 	ring = tb_ring_alloc_rx(xd->tb->nhi, -1, TBNET_RING_SIZE,
-				RING_FLAG_FRAME | RING_FLAG_E2E, sof_mask,
-				eof_mask, tbnet_start_poll, net);
+				RING_FLAG_FRAME, sof_mask, eof_mask,
+				tbnet_start_poll, net);
 	if (!ring) {
 		netdev_err(dev, "failed to allocate Rx ring\n");
 		tb_ring_free(net->tx_ring.ring);

drivers/thunderbolt/Kconfig

@@ -8,10 +8,15 @@ menuconfig USB4
 	select CRYPTO_HASH
 	select NVMEM
 	help
-	  USB4 and Thunderbolt driver. USB4 is the public speficiation
-	  based on Thunderbolt 3 protocol. This driver is required if
+	  USB4 and Thunderbolt driver. USB4 is the public specification
+	  based on the Thunderbolt 3 protocol. This driver is required if
 	  you want to hotplug Thunderbolt and USB4 compliant devices on
 	  Apple hardware or on PCs with Intel Falcon Ridge or newer.
 
 	  To compile this driver a module, choose M here. The module will be
 	  called thunderbolt.
+
+config USB4_KUNIT_TEST
+	bool "KUnit tests"
+	depends on KUNIT=y
+	depends on USB4=y

drivers/thunderbolt/Makefile

@@ -2,3 +2,6 @@
 obj-${CONFIG_USB4} := thunderbolt.o
 thunderbolt-objs := nhi.o nhi_ops.o ctl.o tb.o switch.o cap.o path.o tunnel.o eeprom.o
 thunderbolt-objs += domain.o dma_port.o icm.o property.o xdomain.o lc.o tmu.o usb4.o
+thunderbolt-objs += nvm.o retimer.o quirks.o
+
+obj-${CONFIG_USB4_KUNIT_TEST} += test.o

drivers/thunderbolt/domain.c

@@ -812,6 +812,6 @@ void tb_domain_exit(void)
 {
 	bus_unregister(&tb_bus_type);
 	ida_destroy(&tb_domain_ida);
-	tb_switch_exit();
+	tb_nvm_exit();
 	tb_xdomain_exit();
 }

drivers/thunderbolt/eeprom.c

@@ -599,6 +599,7 @@ int tb_drom_read(struct tb_switch *sw)
 		sw->uid = header->uid;
 	sw->vendor = header->vendor_id;
 	sw->device = header->model_id;
+	tb_check_quirks(sw);
 
 	crc = tb_crc32(sw->drom + TB_DROM_DATA_START, header->data_len);
 	if (crc != header->data_crc32) {

drivers/thunderbolt/lc.c

@@ -366,3 +366,17 @@ int tb_lc_dp_sink_dealloc(struct tb_switch *sw, struct tb_port *in)
 	tb_port_dbg(in, "sink %d de-allocated\n", sink);
 	return 0;
 }
+
+/**
+ * tb_lc_force_power() - Forces LC to be powered on
+ * @sw: Thunderbolt switch
+ *
+ * This is useful to let authentication cycle pass even without
+ * a Thunderbolt link present.
+ */
+int tb_lc_force_power(struct tb_switch *sw)
+{
+	u32 in = 0xffff;
+
+	return tb_sw_write(sw, &in, TB_CFG_SWITCH, TB_LC_POWER, 1);
+}

drivers/thunderbolt/nhi.c

@@ -24,12 +24,7 @@
 
 #define RING_TYPE(ring) ((ring)->is_tx ? "TX ring" : "RX ring")
 
-/*
- * Used to enable end-to-end workaround for missing RX packets. Do not
- * use this ring for anything else.
- */
-#define RING_E2E_UNUSED_HOPID	2
-#define RING_FIRST_USABLE_HOPID	TB_PATH_MIN_HOPID
+#define RING_FIRST_USABLE_HOPID	1
 
 /*
  * Minimal number of vectors when we use MSI-X. Two for control channel
@@ -440,7 +435,7 @@ static int nhi_alloc_hop(struct tb_nhi *nhi, struct tb_ring *ring)
 
 		/*
 		 * Automatically allocate HopID from the non-reserved
-		 * range 8 .. hop_count - 1.
+		 * range 1 .. hop_count - 1.
 		 */
 		for (i = RING_FIRST_USABLE_HOPID; i < nhi->hop_count; i++) {
 			if (ring->is_tx) {
@@ -496,10 +491,6 @@ static struct tb_ring *tb_ring_alloc(struct tb_nhi *nhi, u32 hop, int size,
 	dev_dbg(&nhi->pdev->dev, "allocating %s ring %d of size %d\n",
 		transmit ? "TX" : "RX", hop, size);
 
-	/* Tx Ring 2 is reserved for E2E workaround */
-	if (transmit && hop == RING_E2E_UNUSED_HOPID)
-		return NULL;
-
 	ring = kzalloc(sizeof(*ring), GFP_KERNEL);
 	if (!ring)
 		return NULL;
@@ -614,19 +605,6 @@ void tb_ring_start(struct tb_ring *ring)
 		flags = RING_FLAG_ENABLE | RING_FLAG_RAW;
 	}
 
-	if (ring->flags & RING_FLAG_E2E && !ring->is_tx) {
-		u32 hop;
-
-		/*
-		 * In order not to lose Rx packets we enable end-to-end
-		 * workaround which transfers Rx credits to an unused Tx
-		 * HopID.
-		 */
-		hop = RING_E2E_UNUSED_HOPID << REG_RX_OPTIONS_E2E_HOP_SHIFT;
-		hop &= REG_RX_OPTIONS_E2E_HOP_MASK;
-		flags |= hop | RING_FLAG_E2E_FLOW_CONTROL;
-	}
-
 	ring_iowrite64desc(ring, ring->descriptors_dma, 0);
 	if (ring->is_tx) {
 		ring_iowrite32desc(ring, ring->size, 12);
@@ -1123,9 +1101,7 @@ static int nhi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	/* cannot fail - table is allocated bin pcim_iomap_regions */
 	nhi->iobase = pcim_iomap_table(pdev)[0];
 	nhi->hop_count = ioread32(nhi->iobase + REG_HOP_COUNT) & 0x3ff;
-	if (nhi->hop_count != 12 && nhi->hop_count != 32)
-		dev_warn(&pdev->dev, "unexpected hop count: %d\n",
-			 nhi->hop_count);
+	dev_dbg(&pdev->dev, "total paths: %d\n", nhi->hop_count);
 
 	nhi->tx_rings = devm_kcalloc(&pdev->dev, nhi->hop_count,
 				     sizeof(*nhi->tx_rings), GFP_KERNEL);

drivers/thunderbolt/nvm.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * NVM helpers
+ *
+ * Copyright (C) 2020, Intel Corporation
+ * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
+ */
+
+#include <linux/idr.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+
+#include "tb.h"
+
+static DEFINE_IDA(nvm_ida);
+
+/**
+ * tb_nvm_alloc() - Allocate new NVM structure
+ * @dev: Device owning the NVM
+ *
+ * Allocates new NVM structure with unique @id and returns it. In case
+ * of error returns ERR_PTR().
+ */
+struct tb_nvm *tb_nvm_alloc(struct device *dev)
+{
+	struct tb_nvm *nvm;
+	int ret;
+
+	nvm = kzalloc(sizeof(*nvm), GFP_KERNEL);
+	if (!nvm)
+		return ERR_PTR(-ENOMEM);
+
+	ret = ida_simple_get(&nvm_ida, 0, 0, GFP_KERNEL);
+	if (ret < 0) {
+		kfree(nvm);
+		return ERR_PTR(ret);
+	}
+
+	nvm->id = ret;
+	nvm->dev = dev;
+
+	return nvm;
+}
+
+/**
+ * tb_nvm_add_active() - Adds active NVMem device to NVM
+ * @nvm: NVM structure
+ * @size: Size of the active NVM in bytes
+ * @reg_read: Pointer to the function to read the NVM (passed directly to the
+ *	      NVMem device)
+ *
+ * Registers new active NVmem device for @nvm. The @reg_read is called
+ * directly from NVMem so it must handle possible concurrent access if
+ * needed. The first parameter passed to @reg_read is @nvm structure.
+ * Returns %0 in success and negative errno otherwise.
+ */
+int tb_nvm_add_active(struct tb_nvm *nvm, size_t size, nvmem_reg_read_t reg_read)
+{
+	struct nvmem_config config;
+	struct nvmem_device *nvmem;
+
+	memset(&config, 0, sizeof(config));
+
+	config.name = "nvm_active";
+	config.reg_read = reg_read;
+	config.read_only = true;
+	config.id = nvm->id;
+	config.stride = 4;
+	config.word_size = 4;
+	config.size = size;
+	config.dev = nvm->dev;
+	config.owner = THIS_MODULE;
+	config.priv = nvm;
+
+	nvmem = nvmem_register(&config);
+	if (IS_ERR(nvmem))
+		return PTR_ERR(nvmem);
+
+	nvm->active = nvmem;
+	return 0;
+}
+
+/**
+ * tb_nvm_write_buf() - Write data to @nvm buffer
+ * @nvm: NVM structure
+ * @offset: Offset where to write the data
+ * @val: Data buffer to write
+ * @bytes: Number of bytes to write
+ *
+ * Helper function to cache the new NVM image before it is actually
+ * written to the flash. Copies @bytes from @val to @nvm->buf starting
+ * from @offset.
+ */
+int tb_nvm_write_buf(struct tb_nvm *nvm, unsigned int offset, void *val,
+		     size_t bytes)
+{
+	if (!nvm->buf) {
+		nvm->buf = vmalloc(NVM_MAX_SIZE);
+		if (!nvm->buf)
+			return -ENOMEM;
+	}
+
+	nvm->flushed = false;
+	nvm->buf_data_size = offset + bytes;
+	memcpy(nvm->buf + offset, val, bytes);
+	return 0;
+}
+
+/**
+ * tb_nvm_add_non_active() - Adds non-active NVMem device to NVM
+ * @nvm: NVM structure
+ * @size: Size of the non-active NVM in bytes
+ * @reg_write: Pointer to the function to write the NVM (passed directly
+ *	       to the NVMem device)
+ *
+ * Registers new non-active NVmem device for @nvm. The @reg_write is called
+ * directly from NVMem so it must handle possible concurrent access if
+ * needed. The first parameter passed to @reg_write is @nvm structure.
+ * Returns %0 in success and negative errno otherwise.
+ */
+int tb_nvm_add_non_active(struct tb_nvm *nvm, size_t size,
+			  nvmem_reg_write_t reg_write)
+{
+	struct nvmem_config config;
+	struct nvmem_device *nvmem;
+
+	memset(&config, 0, sizeof(config));
+
+	config.name = "nvm_non_active";
+	config.reg_write = reg_write;
+	config.root_only = true;
+	config.id = nvm->id;
+	config.stride = 4;
+	config.word_size = 4;
+	config.size = size;
+	config.dev = nvm->dev;
+	config.owner = THIS_MODULE;
+	config.priv = nvm;
+
+	nvmem = nvmem_register(&config);
+	if (IS_ERR(nvmem))
+		return PTR_ERR(nvmem);
+
+	nvm->non_active = nvmem;
+	return 0;
+}
+
+/**
+ * tb_nvm_free() - Release NVM and its resources
+ * @nvm: NVM structure to release
+ *
+ * Releases NVM and the NVMem devices if they were registered.
+ */
+void tb_nvm_free(struct tb_nvm *nvm)
+{
+	if (nvm) {
+		if (nvm->non_active)
+			nvmem_unregister(nvm->non_active);
+		if (nvm->active)
+			nvmem_unregister(nvm->active);
+		vfree(nvm->buf);
+		ida_simple_remove(&nvm_ida, nvm->id);
+	}
+	kfree(nvm);
+}
+
+void tb_nvm_exit(void)
+{
+	ida_destroy(&nvm_ida);
+}

drivers/thunderbolt/path.c

@@ -229,7 +229,7 @@ struct tb_path *tb_path_alloc(struct tb *tb, struct tb_port *src, int src_hopid,
 			      struct tb_port *dst, int dst_hopid, int link_nr,
 			      const char *name)
 {
-	struct tb_port *in_port, *out_port;
+	struct tb_port *in_port, *out_port, *first_port, *last_port;
 	int in_hopid, out_hopid;
 	struct tb_path *path;
 	size_t num_hops;
@@ -239,12 +239,23 @@ struct tb_path *tb_path_alloc(struct tb *tb, struct tb_port *src, int src_hopid,
 	if (!path)
 		return NULL;
 
-	/*
-	 * Number of hops on a path is the distance between the two
-	 * switches plus the source adapter port.
-	 */
-	num_hops = abs(tb_route_length(tb_route(src->sw)) -
-		       tb_route_length(tb_route(dst->sw))) + 1;
+	first_port = last_port = NULL;
+	i = 0;
+	tb_for_each_port_on_path(src, dst, in_port) {
+		if (!first_port)
+			first_port = in_port;
+		last_port = in_port;
+		i++;
+	}
+
+	/* Check that src and dst are reachable */
+	if (first_port != src || last_port != dst) {
+		kfree(path);
+		return NULL;
+	}
+
+	/* Each hop takes two ports */
+	num_hops = i / 2;
 
 	path->hops = kcalloc(num_hops, sizeof(*path->hops), GFP_KERNEL);
 	if (!path->hops) {
@@ -559,21 +570,20 @@ bool tb_path_is_invalid(struct tb_path *path)
 }
 
 /**
- * tb_path_switch_on_path() - Does the path go through certain switch
+ * tb_path_port_on_path() - Does the path go through certain port
  * @path: Path to check
- * @sw: Switch to check
+ * @port: Switch to check
  *
- * Goes over all hops on path and checks if @sw is any of them.
+ * Goes over all hops on path and checks if @port is any of them.
  * Direction does not matter.
  */
-bool tb_path_switch_on_path(const struct tb_path *path,
-			    const struct tb_switch *sw)
+bool tb_path_port_on_path(const struct tb_path *path, const struct tb_port *port)
 {
 	int i;
 
 	for (i = 0; i < path->path_length; i++) {
-		if (path->hops[i].in_port->sw == sw ||
-		    path->hops[i].out_port->sw == sw)
+		if (path->hops[i].in_port == port ||
+		    path->hops[i].out_port == port)
 			return true;
 	}
 

drivers/thunderbolt/quirks.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Thunderbolt driver - quirks
+ *
+ * Copyright (c) 2020 Mario Limonciello <mario.limonciello@dell.com>
+ */
+
+#include "tb.h"
+
+static void quirk_force_power_link(struct tb_switch *sw)
+{
+	sw->quirks |= QUIRK_FORCE_POWER_LINK_CONTROLLER;
+}
+
+struct tb_quirk {
+	u16 vendor;
+	u16 device;
+	void (*hook)(struct tb_switch *sw);
+};
+
+static const struct tb_quirk tb_quirks[] = {
+	/* Dell WD19TB supports self-authentication on unplug */
+	{ 0x00d4, 0xb070, quirk_force_power_link },
+};
+
+/**
+ * tb_check_quirks() - Check for quirks to apply
+ * @sw: Thunderbolt switch
+ *
+ *  Apply any quirks for the Thunderbolt controller
+ */
+void tb_check_quirks(struct tb_switch *sw)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(tb_quirks); i++) {
+		const struct tb_quirk *q = &tb_quirks[i];
+
+		if (sw->device == q->device && sw->vendor == q->vendor)
+			q->hook(sw);
+	}
+}

drivers/thunderbolt/sb_regs.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * USB4 port sideband registers found on routers and retimers
+ *
+ * Copyright (C) 2020, Intel Corporation
+ * Authors: Mika Westerberg <mika.westerberg@linux.intel.com>
+ *	    Rajmohan Mani <rajmohan.mani@intel.com>
+ */
+
+#ifndef _SB_REGS
+#define _SB_REGS
+
+#define USB4_SB_VENDOR_ID			0x00
+#define USB4_SB_PRODUCT_ID			0x01
+#define USB4_SB_OPCODE				0x08
+
+enum usb4_sb_opcode {
+	USB4_SB_OPCODE_ERR = 0x20525245,			/* "ERR " */
+	USB4_SB_OPCODE_ONS = 0x444d4321,			/* "!CMD" */
+	USB4_SB_OPCODE_ENUMERATE_RETIMERS = 0x4d554e45,		/* "ENUM" */
+	USB4_SB_OPCODE_QUERY_LAST_RETIMER = 0x5453414c,		/* "LAST" */
+	USB4_SB_OPCODE_GET_NVM_SECTOR_SIZE = 0x53534e47,	/* "GNSS" */
+	USB4_SB_OPCODE_NVM_SET_OFFSET = 0x53504f42,		/* "BOPS" */
+	USB4_SB_OPCODE_NVM_BLOCK_WRITE = 0x574b4c42,		/* "BLKW" */
+	USB4_SB_OPCODE_NVM_AUTH_WRITE = 0x48545541,		/* "AUTH" */
+	USB4_SB_OPCODE_NVM_READ = 0x52524641,			/* "AFRR" */
+};
+
+#define USB4_SB_METADATA			0x09
+#define USB4_SB_METADATA_NVM_AUTH_WRITE_MASK	GENMASK(5, 0)
+#define USB4_SB_DATA				0x12
+
+#endif

drivers/thunderbolt/tb.h

@@ -18,8 +18,17 @@
 #include "ctl.h"
 #include "dma_port.h"
 
+#define NVM_MIN_SIZE		SZ_32K
+#define NVM_MAX_SIZE		SZ_512K
+
+/* Intel specific NVM offsets */
+#define NVM_DEVID		0x05
+#define NVM_VERSION		0x08
+#define NVM_FLASH_SIZE		0x45
+
 /**
- * struct tb_switch_nvm - Structure holding switch NVM information
+ * struct tb_nvm - Structure holding NVM information
+ * @dev: Owner of the NVM
  * @major: Major version number of the active NVM portion
  * @minor: Minor version number of the active NVM portion
  * @id: Identifier used with both NVM portions
@@ -29,9 +38,14 @@
  *	 the actual NVM flash device
  * @buf_data_size: Number of bytes actually consumed by the new NVM
  *		   image
- * @authenticating: The switch is authenticating the new NVM
+ * @authenticating: The device is authenticating the new NVM
+ * @flushed: The image has been flushed to the storage area
+ *
+ * The user of this structure needs to handle serialization of possible
+ * concurrent access.
  */
-struct tb_switch_nvm {
+struct tb_nvm {
+	struct device *dev;
 	u8 major;
 	u8 minor;
 	int id;
@@ -40,6 +54,7 @@ struct tb_switch_nvm {
 	void *buf;
 	size_t buf_data_size;
 	bool authenticating;
+	bool flushed;
 };
 
 #define TB_SWITCH_KEY_SIZE		32
@@ -97,6 +112,7 @@ struct tb_switch_tmu {
  * @device_name: Name of the device (or %NULL if not known)
  * @link_speed: Speed of the link in Gb/s
  * @link_width: Width of the link (1 or 2)
+ * @link_usb4: Upstream link is USB4
  * @generation: Switch Thunderbolt generation
  * @cap_plug_events: Offset to the plug events capability (%0 if not found)
  * @cap_lc: Offset to the link controller capability (%0 if not found)
@@ -117,6 +133,7 @@ struct tb_switch_tmu {
  * @depth: Depth in the chain this switch is connected (ICM only)
  * @rpm_complete: Completion used to wait for runtime resume to
  *		  complete (ICM only)
+ * @quirks: Quirks used for this Thunderbolt switch
  *
  * When the switch is being added or removed to the domain (other
  * switches) you need to have domain lock held.
@@ -136,12 +153,13 @@ struct tb_switch {
 	const char *device_name;
 	unsigned int link_speed;
 	unsigned int link_width;
+	bool link_usb4;
 	unsigned int generation;
 	int cap_plug_events;
 	int cap_lc;
 	bool is_unplugged;
 	u8 *drom;
-	struct tb_switch_nvm *nvm;
+	struct tb_nvm *nvm;
 	bool no_nvm_upgrade;
 	bool safe_mode;
 	bool boot;
@@ -154,6 +172,7 @@ struct tb_switch {
 	u8 link;
 	u8 depth;
 	struct completion rpm_complete;
+	unsigned long quirks;
 };
 
 /**
@@ -195,6 +214,28 @@ struct tb_port {
 	struct list_head list;
 };
 
+/**
+ * tb_retimer: Thunderbolt retimer
+ * @dev: Device for the retimer
+ * @tb: Pointer to the domain the retimer belongs to
+ * @index: Retimer index facing the router USB4 port
+ * @vendor: Vendor ID of the retimer
+ * @device: Device ID of the retimer
+ * @port: Pointer to the lane 0 adapter
+ * @nvm: Pointer to the NVM if the retimer has one (%NULL otherwise)
+ * @auth_status: Status of last NVM authentication
+ */
+struct tb_retimer {
+	struct device dev;
+	struct tb *tb;
+	u8 index;
+	u32 vendor;
+	u32 device;
+	struct tb_port *port;
+	struct tb_nvm *nvm;
+	u32 auth_status;
+};
+
 /**
  * struct tb_path_hop - routing information for a tb_path
  * @in_port: Ingress port of a switch
@@ -286,7 +327,11 @@ struct tb_path {
 
 /* HopIDs 0-7 are reserved by the Thunderbolt protocol */
 #define TB_PATH_MIN_HOPID	8
-#define TB_PATH_MAX_HOPS	7
+/*
+ * Support paths from the farthest (depth 6) router to the host and back
+ * to the same level (not necessarily to the same router).
+ */
+#define TB_PATH_MAX_HOPS	(7 * 2)
 
 /**
  * struct tb_cm_ops - Connection manager specific operations vector
@@ -534,11 +579,11 @@ struct tb *icm_probe(struct tb_nhi *nhi);
 struct tb *tb_probe(struct tb_nhi *nhi);
 
 extern struct device_type tb_domain_type;
+extern struct device_type tb_retimer_type;
 extern struct device_type tb_switch_type;
 
 int tb_domain_init(void);
 void tb_domain_exit(void);
-void tb_switch_exit(void);
 int tb_xdomain_init(void);
 void tb_xdomain_exit(void);
 
@@ -571,6 +616,15 @@ static inline void tb_domain_put(struct tb *tb)
 	put_device(&tb->dev);
 }
 
+struct tb_nvm *tb_nvm_alloc(struct device *dev);
+int tb_nvm_add_active(struct tb_nvm *nvm, size_t size, nvmem_reg_read_t reg_read);
+int tb_nvm_write_buf(struct tb_nvm *nvm, unsigned int offset, void *val,
+		     size_t bytes);
+int tb_nvm_add_non_active(struct tb_nvm *nvm, size_t size,
+			  nvmem_reg_write_t reg_write);
+void tb_nvm_free(struct tb_nvm *nvm);
+void tb_nvm_exit(void);
+
 struct tb_switch *tb_switch_alloc(struct tb *tb, struct device *parent,
 				  u64 route);
 struct tb_switch *tb_switch_alloc_safe_mode(struct tb *tb,
@@ -741,6 +795,20 @@ void tb_port_release_out_hopid(struct tb_port *port, int hopid);
 struct tb_port *tb_next_port_on_path(struct tb_port *start, struct tb_port *end,
 				     struct tb_port *prev);
 
+/**
+ * tb_for_each_port_on_path() - Iterate over each port on path
+ * @src: Source port
+ * @dst: Destination port
+ * @p: Port used as iterator
+ *
+ * Walks over each port on path from @src to @dst.
+ */
+#define tb_for_each_port_on_path(src, dst, p)				\
+	for ((p) = tb_next_port_on_path((src), (dst), NULL); (p);	\
+	     (p) = tb_next_port_on_path((src), (dst), (p)))
+
+int tb_port_get_link_speed(struct tb_port *port);
+
 int tb_switch_find_vse_cap(struct tb_switch *sw, enum tb_switch_vse_cap vsec);
 int tb_switch_find_cap(struct tb_switch *sw, enum tb_switch_cap cap);
 int tb_port_find_cap(struct tb_port *port, enum tb_port_cap cap);
@@ -769,8 +837,8 @@ void tb_path_free(struct tb_path *path);
 int tb_path_activate(struct tb_path *path);
 void tb_path_deactivate(struct tb_path *path);
 bool tb_path_is_invalid(struct tb_path *path);
-bool tb_path_switch_on_path(const struct tb_path *path,
-			    const struct tb_switch *sw);
+bool tb_path_port_on_path(const struct tb_path *path,
+			  const struct tb_port *port);
 
 int tb_drom_read(struct tb_switch *sw);
 int tb_drom_read_uid_only(struct tb_switch *sw, u64 *uid);
@@ -783,6 +851,7 @@ bool tb_lc_lane_bonding_possible(struct tb_switch *sw);
 bool tb_lc_dp_sink_query(struct tb_switch *sw, struct tb_port *in);
 int tb_lc_dp_sink_alloc(struct tb_switch *sw, struct tb_port *in);
 int tb_lc_dp_sink_dealloc(struct tb_switch *sw, struct tb_port *in);
+int tb_lc_force_power(struct tb_switch *sw);
 
 static inline int tb_route_length(u64 route)
 {
@@ -812,6 +881,21 @@ void tb_xdomain_remove(struct tb_xdomain *xd);
 struct tb_xdomain *tb_xdomain_find_by_link_depth(struct tb *tb, u8 link,
 						 u8 depth);
 
+int tb_retimer_scan(struct tb_port *port);
+void tb_retimer_remove_all(struct tb_port *port);
+
+static inline bool tb_is_retimer(const struct device *dev)
+{
+	return dev->type == &tb_retimer_type;
+}
+
+static inline struct tb_retimer *tb_to_retimer(struct device *dev)
+{
+	if (tb_is_retimer(dev))
+		return container_of(dev, struct tb_retimer, dev);
+	return NULL;
+}
+
 int usb4_switch_setup(struct tb_switch *sw);
 int usb4_switch_read_uid(struct tb_switch *sw, u64 *uid);
 int usb4_switch_drom_read(struct tb_switch *sw, unsigned int address, void *buf,
@@ -835,4 +919,35 @@ struct tb_port *usb4_switch_map_usb3_down(struct tb_switch *sw,
 					  const struct tb_port *port);
 
 int usb4_port_unlock(struct tb_port *port);
+int usb4_port_enumerate_retimers(struct tb_port *port);
+
+int usb4_port_retimer_read(struct tb_port *port, u8 index, u8 reg, void *buf,
+			   u8 size);
+int usb4_port_retimer_write(struct tb_port *port, u8 index, u8 reg,
+			    const void *buf, u8 size);
+int usb4_port_retimer_is_last(struct tb_port *port, u8 index);
+int usb4_port_retimer_nvm_sector_size(struct tb_port *port, u8 index);
+int usb4_port_retimer_nvm_write(struct tb_port *port, u8 index,
+				unsigned int address, const void *buf,
+				size_t size);
+int usb4_port_retimer_nvm_authenticate(struct tb_port *port, u8 index);
+int usb4_port_retimer_nvm_authenticate_status(struct tb_port *port, u8 index,
+					      u32 *status);
+int usb4_port_retimer_nvm_read(struct tb_port *port, u8 index,
+			       unsigned int address, void *buf, size_t size);
+
+int usb4_usb3_port_max_link_rate(struct tb_port *port);
+int usb4_usb3_port_actual_link_rate(struct tb_port *port);
+int usb4_usb3_port_allocated_bandwidth(struct tb_port *port, int *upstream_bw,
+				       int *downstream_bw);
+int usb4_usb3_port_allocate_bandwidth(struct tb_port *port, int *upstream_bw,
+				      int *downstream_bw);
+int usb4_usb3_port_release_bandwidth(struct tb_port *port, int *upstream_bw,
+				     int *downstream_bw);
+
+/* keep link controller awake during update */
+#define QUIRK_FORCE_POWER_LINK_CONTROLLER		BIT(0)
+
+void tb_check_quirks(struct tb_switch *sw);
+
 #endif

drivers/thunderbolt/tb_regs.h

@@ -288,8 +288,19 @@ struct tb_regs_port_header {
 #define LANE_ADP_CS_1_CURRENT_WIDTH_SHIFT	20
 
 /* USB4 port registers */
+#define PORT_CS_1				0x01
+#define PORT_CS_1_LENGTH_SHIFT			8
+#define PORT_CS_1_TARGET_MASK			GENMASK(18, 16)
+#define PORT_CS_1_TARGET_SHIFT			16
+#define PORT_CS_1_RETIMER_INDEX_SHIFT		20
+#define PORT_CS_1_WNR_WRITE			BIT(24)
+#define PORT_CS_1_NR				BIT(25)
+#define PORT_CS_1_RC				BIT(26)
+#define PORT_CS_1_PND				BIT(31)
+#define PORT_CS_2				0x02
 #define PORT_CS_18				0x12
 #define PORT_CS_18_BE				BIT(8)
+#define PORT_CS_18_TCM				BIT(9)
 #define PORT_CS_19				0x13
 #define PORT_CS_19_PC				BIT(3)
 
@@ -337,6 +348,25 @@ struct tb_regs_port_header {
 #define ADP_USB3_CS_0				0x00
 #define ADP_USB3_CS_0_V				BIT(30)
 #define ADP_USB3_CS_0_PE			BIT(31)
+#define ADP_USB3_CS_1				0x01
+#define ADP_USB3_CS_1_CUBW_MASK			GENMASK(11, 0)
+#define ADP_USB3_CS_1_CDBW_MASK			GENMASK(23, 12)
+#define ADP_USB3_CS_1_CDBW_SHIFT		12
+#define ADP_USB3_CS_1_HCA			BIT(31)
+#define ADP_USB3_CS_2				0x02
+#define ADP_USB3_CS_2_AUBW_MASK			GENMASK(11, 0)
+#define ADP_USB3_CS_2_ADBW_MASK			GENMASK(23, 12)
+#define ADP_USB3_CS_2_ADBW_SHIFT		12
+#define ADP_USB3_CS_2_CMR			BIT(31)
+#define ADP_USB3_CS_3				0x03
+#define ADP_USB3_CS_3_SCALE_MASK		GENMASK(5, 0)
+#define ADP_USB3_CS_4				0x04
+#define ADP_USB3_CS_4_ALR_MASK			GENMASK(6, 0)
+#define ADP_USB3_CS_4_ALR_20G			0x1
+#define ADP_USB3_CS_4_ULV			BIT(7)
+#define ADP_USB3_CS_4_MSLR_MASK			GENMASK(18, 12)
+#define ADP_USB3_CS_4_MSLR_SHIFT		12
+#define ADP_USB3_CS_4_MSLR_20G			0x1
 
 /* Hop register from TB_CFG_HOPS. 8 byte per entry. */
 struct tb_regs_hop {
@@ -379,6 +409,7 @@ struct tb_regs_hop {
 #define TB_LC_SNK_ALLOCATION_SNK1_SHIFT	4
 #define TB_LC_SNK_ALLOCATION_SNK1_MASK	GENMASK(7, 4)
 #define TB_LC_SNK_ALLOCATION_SNK1_CM	0x1
+#define TB_LC_POWER			0x740
 
 /* Link controller registers */
 #define TB_LC_PORT_ATTR			0x8d

drivers/thunderbolt/tunnel.h

@@ -29,10 +29,16 @@ enum tb_tunnel_type {
  * @init: Optional tunnel specific initialization
  * @activate: Optional tunnel specific activation/deactivation
  * @consumed_bandwidth: Return how much bandwidth the tunnel consumes
+ * @release_unused_bandwidth: Release all unused bandwidth
+ * @reclaim_available_bandwidth: Reclaim back available bandwidth
  * @list: Tunnels are linked using this field
  * @type: Type of the tunnel
- * @max_bw: Maximum bandwidth (Mb/s) available for the tunnel (only for DP).
+ * @max_up: Maximum upstream bandwidth (Mb/s) available for the tunnel.
  *	    Only set if the bandwidth needs to be limited.
+ * @max_down: Maximum downstream bandwidth (Mb/s) available for the tunnel.
+ *	      Only set if the bandwidth needs to be limited.
+ * @allocated_up: Allocated upstream bandwidth (only for USB3)
+ * @allocated_down: Allocated downstream bandwidth (only for USB3)
  */
 struct tb_tunnel {
 	struct tb *tb;
@@ -42,10 +48,18 @@ struct tb_tunnel {
 	size_t npaths;
 	int (*init)(struct tb_tunnel *tunnel);
 	int (*activate)(struct tb_tunnel *tunnel, bool activate);
-	int (*consumed_bandwidth)(struct tb_tunnel *tunnel);
+	int (*consumed_bandwidth)(struct tb_tunnel *tunnel, int *consumed_up,
+				  int *consumed_down);
+	int (*release_unused_bandwidth)(struct tb_tunnel *tunnel);
+	void (*reclaim_available_bandwidth)(struct tb_tunnel *tunnel,
+					    int *available_up,
+					    int *available_down);
 	struct list_head list;
 	enum tb_tunnel_type type;
-	unsigned int max_bw;
+	int max_up;
+	int max_down;
+	int allocated_up;
+	int allocated_down;
 };
 
 struct tb_tunnel *tb_tunnel_discover_pci(struct tb *tb, struct tb_port *down);
@@ -53,23 +67,30 @@ struct tb_tunnel *tb_tunnel_alloc_pci(struct tb *tb, struct tb_port *up,
 				      struct tb_port *down);
 struct tb_tunnel *tb_tunnel_discover_dp(struct tb *tb, struct tb_port *in);
 struct tb_tunnel *tb_tunnel_alloc_dp(struct tb *tb, struct tb_port *in,
-				     struct tb_port *out, int max_bw);
+				     struct tb_port *out, int max_up,
+				     int max_down);
 struct tb_tunnel *tb_tunnel_alloc_dma(struct tb *tb, struct tb_port *nhi,
 				      struct tb_port *dst, int transmit_ring,
 				      int transmit_path, int receive_ring,
 				      int receive_path);
 struct tb_tunnel *tb_tunnel_discover_usb3(struct tb *tb, struct tb_port *down);
 struct tb_tunnel *tb_tunnel_alloc_usb3(struct tb *tb, struct tb_port *up,
-				       struct tb_port *down);
+				       struct tb_port *down, int max_up,
+				       int max_down);
 
 void tb_tunnel_free(struct tb_tunnel *tunnel);
 int tb_tunnel_activate(struct tb_tunnel *tunnel);
 int tb_tunnel_restart(struct tb_tunnel *tunnel);
 void tb_tunnel_deactivate(struct tb_tunnel *tunnel);
 bool tb_tunnel_is_invalid(struct tb_tunnel *tunnel);
-bool tb_tunnel_switch_on_path(const struct tb_tunnel *tunnel,
-			      const struct tb_switch *sw);
-int tb_tunnel_consumed_bandwidth(struct tb_tunnel *tunnel);
+bool tb_tunnel_port_on_path(const struct tb_tunnel *tunnel,
+			    const struct tb_port *port);
+int tb_tunnel_consumed_bandwidth(struct tb_tunnel *tunnel, int *consumed_up,
+				 int *consumed_down);
+int tb_tunnel_release_unused_bandwidth(struct tb_tunnel *tunnel);
+void tb_tunnel_reclaim_available_bandwidth(struct tb_tunnel *tunnel,
+					   int *available_up,
+					   int *available_down);
 
 static inline bool tb_tunnel_is_pci(const struct tb_tunnel *tunnel)
 {

drivers/thunderbolt/xdomain.c

@@ -501,6 +501,55 @@ void tb_unregister_protocol_handler(struct tb_protocol_handler *handler)
 }
 EXPORT_SYMBOL_GPL(tb_unregister_protocol_handler);
 
+static int rebuild_property_block(void)
+{
+	u32 *block, len;
+	int ret;
+
+	ret = tb_property_format_dir(xdomain_property_dir, NULL, 0);
+	if (ret < 0)
+		return ret;
+
+	len = ret;
+
+	block = kcalloc(len, sizeof(u32), GFP_KERNEL);
+	if (!block)
+		return -ENOMEM;
+
+	ret = tb_property_format_dir(xdomain_property_dir, block, len);
+	if (ret) {
+		kfree(block);
+		return ret;
+	}
+
+	kfree(xdomain_property_block);
+	xdomain_property_block = block;
+	xdomain_property_block_len = len;
+	xdomain_property_block_gen++;
+
+	return 0;
+}
+
+static void finalize_property_block(void)
+{
+	const struct tb_property *nodename;
+
+	/*
+	 * On first XDomain connection we set up the the system
+	 * nodename. This delayed here because userspace may not have it
+	 * set when the driver is first probed.
+	 */
+	mutex_lock(&xdomain_lock);
+	nodename = tb_property_find(xdomain_property_dir, "deviceid",
+				    TB_PROPERTY_TYPE_TEXT);
+	if (!nodename) {
+		tb_property_add_text(xdomain_property_dir, "deviceid",
+				     utsname()->nodename);
+		rebuild_property_block();
+	}
+	mutex_unlock(&xdomain_lock);
+}
+
 static void tb_xdp_handle_request(struct work_struct *work)
 {
 	struct xdomain_request_work *xw = container_of(work, typeof(*xw), work);
@@ -529,6 +578,8 @@ static void tb_xdp_handle_request(struct work_struct *work)
 		goto out;
 	}
 
+	finalize_property_block();
+
 	switch (pkg->type) {
 	case PROPERTIES_REQUEST:
 		ret = tb_xdp_properties_response(tb, ctl, route, sequence, uuid,
@@ -1569,35 +1620,6 @@ bool tb_xdomain_handle_request(struct tb *tb, enum tb_cfg_pkg_type type,
 	return ret > 0;
 }
 
-static int rebuild_property_block(void)
-{
-	u32 *block, len;
-	int ret;
-
-	ret = tb_property_format_dir(xdomain_property_dir, NULL, 0);
-	if (ret < 0)
-		return ret;
-
-	len = ret;
-
-	block = kcalloc(len, sizeof(u32), GFP_KERNEL);
-	if (!block)
-		return -ENOMEM;
-
-	ret = tb_property_format_dir(xdomain_property_dir, block, len);
-	if (ret) {
-		kfree(block);
-		return ret;
-	}
-
-	kfree(xdomain_property_block);
-	xdomain_property_block = block;
-	xdomain_property_block_len = len;
-	xdomain_property_block_gen++;
-
-	return 0;
-}
-
 static int update_xdomain(struct device *dev, void *data)
 {
 	struct tb_xdomain *xd;
@@ -1702,8 +1724,6 @@ EXPORT_SYMBOL_GPL(tb_unregister_property_dir);
 
 int tb_xdomain_init(void)
 {
-	int ret;
-
 	xdomain_property_dir = tb_property_create_dir(NULL);
 	if (!xdomain_property_dir)
 		return -ENOMEM;
@@ -1712,22 +1732,16 @@ int tb_xdomain_init(void)
 	 * Initialize standard set of properties without any service
 	 * directories. Those will be added by service drivers
 	 * themselves when they are loaded.
+	 *
+	 * We also add node name later when first connection is made.
 	 */
 	tb_property_add_immediate(xdomain_property_dir, "vendorid",
 				  PCI_VENDOR_ID_INTEL);
 	tb_property_add_text(xdomain_property_dir, "vendorid", "Intel Corp.");
 	tb_property_add_immediate(xdomain_property_dir, "deviceid", 0x1);
-	tb_property_add_text(xdomain_property_dir, "deviceid",
-			     utsname()->nodename);
 	tb_property_add_immediate(xdomain_property_dir, "devicerv", 0x80000100);
 
-	ret = rebuild_property_block();
-	if (ret) {
-		tb_property_free_dir(xdomain_property_dir);
-		xdomain_property_dir = NULL;
-	}
-
-	return ret;
+	return 0;
 }
 
 void tb_xdomain_exit(void)

drivers/usb/atm/cxacru.c

@@ -408,7 +408,7 @@ static ssize_t adsl_state_store(struct device *dev,
 		case CXPOLL_STOPPING:
 			/* abort stop request */
 			instance->poll_state = CXPOLL_POLLING;
-			/* fall through */
+			fallthrough;
 		case CXPOLL_POLLING:
 		case CXPOLL_SHUTDOWN:
 			/* don't start polling */
@@ -802,7 +802,7 @@ static int cxacru_atm_start(struct usbatm_data *usbatm_instance,
 	case CXPOLL_STOPPING:
 		/* abort stop request */
 		instance->poll_state = CXPOLL_POLLING;
-		/* fall through */
+		fallthrough;
 	case CXPOLL_POLLING:
 	case CXPOLL_SHUTDOWN:
 		/* don't start polling */

drivers/usb/atm/ueagle-atm.c

@@ -570,7 +570,7 @@ MODULE_PARM_DESC(annex,
 #define LOAD_INTERNAL     0xA0
 #define F8051_USBCS       0x7f92
 
-/**
+/*
  * uea_send_modem_cmd - Send a command for pre-firmware devices.
  */
 static int uea_send_modem_cmd(struct usb_device *usb,
@@ -672,7 +672,7 @@ static void uea_upload_pre_firmware(const struct firmware *fw_entry,
 	uea_leaves(usb);
 }
 
-/**
+/*
  * uea_load_firmware - Load usb firmware for pre-firmware devices.
  */
 static int uea_load_firmware(struct usb_device *usb, unsigned int ver)

drivers/usb/c67x00/c67x00-hcd.c

@@ -228,7 +228,7 @@ static int c67x00_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
  * Main part of host controller driver
  */
 
-/**
+/*
  * c67x00_hcd_irq
  *
  * This function is called from the interrupt handler in c67x00-drv.c
@@ -260,7 +260,7 @@ static void c67x00_hcd_irq(struct c67x00_sie *sie, u16 int_status, u16 msg)
 	}
 }
 
-/**
+/*
  * c67x00_hcd_start: Host controller start hook
  */
 static int c67x00_hcd_start(struct usb_hcd *hcd)
@@ -272,7 +272,7 @@ static int c67x00_hcd_start(struct usb_hcd *hcd)
 	return 0;
 }
 
-/**
+/*
  * c67x00_hcd_stop: Host controller stop hook
  */
 static void c67x00_hcd_stop(struct usb_hcd *hcd)

drivers/usb/c67x00/c67x00-ll-hpi.c

@@ -262,7 +262,7 @@ u16 c67x00_ll_get_usb_ctl(struct c67x00_sie *sie)
 	return hpi_read_word(sie->dev, USB_CTL_REG(sie->sie_num));
 }
 
-/**
+/*
  * c67x00_ll_usb_clear_status - clear the USB status bits
  */
 void c67x00_ll_usb_clear_status(struct c67x00_sie *sie, u16 bits)
@@ -395,7 +395,7 @@ int c67x00_ll_reset(struct c67x00_device *dev)
 
 /* -------------------------------------------------------------------------- */
 
-/**
+/*
  * c67x00_ll_write_mem_le16 - write into c67x00 memory
  * Only data is little endian, addr has cpu endianess.
  */
@@ -434,7 +434,7 @@ void c67x00_ll_write_mem_le16(struct c67x00_device *dev, u16 addr,
 	}
 }
 
-/**
+/*
  * c67x00_ll_read_mem_le16 - read from c67x00 memory
  * Only data is little endian, addr has cpu endianess.
  */

drivers/usb/c67x00/c67x00-sched.c

@@ -23,7 +23,7 @@
 
 /* -------------------------------------------------------------------------- */
 
-/**
+/*
  * struct c67x00_ep_data: Host endpoint data structure
  */
 struct c67x00_ep_data {
@@ -34,7 +34,7 @@ struct c67x00_ep_data {
 	u16 next_frame;		/* For int/isoc transactions */
 };
 
-/**
+/*
  * struct c67x00_td
  *
  * Hardware parts are little endiannes, SW in CPU endianess.
@@ -130,7 +130,7 @@ struct c67x00_urb_priv {
 
 /* -------------------------------------------------------------------------- */
 
-/**
+/*
  * dbg_td - Dump the contents of the TD
  */
 static void dbg_td(struct c67x00_hcd *c67x00, struct c67x00_td *td, char *msg)
@@ -161,7 +161,7 @@ static inline u16 c67x00_get_current_frame_number(struct c67x00_hcd *c67x00)
 	return c67x00_ll_husb_get_frame(c67x00->sie) & HOST_FRAME_MASK;
 }
 
-/**
+/*
  * frame_add
  * Software wraparound for framenumbers.
  */
@@ -170,7 +170,7 @@ static inline u16 frame_add(u16 a, u16 b)
 	return (a + b) & HOST_FRAME_MASK;
 }
 
-/**
+/*
  * frame_after - is frame a after frame b
  */
 static inline int frame_after(u16 a, u16 b)
@@ -179,7 +179,7 @@ static inline int frame_after(u16 a, u16 b)
 	    (HOST_FRAME_MASK / 2);
 }
 
-/**
+/*
  * frame_after_eq - is frame a after or equal to frame b
  */
 static inline int frame_after_eq(u16 a, u16 b)
@@ -190,7 +190,7 @@ static inline int frame_after_eq(u16 a, u16 b)
 
 /* -------------------------------------------------------------------------- */
 
-/**
+/*
  * c67x00_release_urb - remove link from all tds to this urb
  * Disconnects the urb from it's tds, so that it can be given back.
  * pre: urb->hcpriv != NULL
@@ -557,7 +557,7 @@ static int c67x00_claim_frame_bw(struct c67x00_hcd *c67x00, struct urb *urb,
 
 /* -------------------------------------------------------------------------- */
 
-/**
+/*
  * td_addr and buf_addr must be word aligned
  */
 static int c67x00_create_td(struct c67x00_hcd *c67x00, struct urb *urb,
@@ -685,7 +685,7 @@ static int c67x00_add_data_urb(struct c67x00_hcd *c67x00, struct urb *urb)
 	return 0;
 }
 
-/**
+/*
  * return 0 in case more bandwidth is available, else errorcode
  */
 static int c67x00_add_ctrl_urb(struct c67x00_hcd *c67x00, struct urb *urb)
@@ -822,7 +822,7 @@ static void c67x00_fill_frame(struct c67x00_hcd *c67x00)
 
 /* -------------------------------------------------------------------------- */
 
-/**
+/*
  * Get TD from C67X00
  */
 static inline void
@@ -970,7 +970,7 @@ static void c67x00_handle_isoc(struct c67x00_hcd *c67x00, struct c67x00_td *td)
 
 /* -------------------------------------------------------------------------- */
 
-/**
+/*
  * c67x00_check_td_list - handle tds which have been processed by the c67x00
  * pre: current_td == 0
  */
@@ -1045,7 +1045,7 @@ static inline int c67x00_all_tds_processed(struct c67x00_hcd *c67x00)
 	return !c67x00_ll_husb_get_current_td(c67x00->sie);
 }
 
-/**
+/*
  * Send td to C67X00
  */
 static void c67x00_send_td(struct c67x00_hcd *c67x00, struct c67x00_td *td)
@@ -1081,7 +1081,7 @@ static void c67x00_send_frame(struct c67x00_hcd *c67x00)
 
 /* -------------------------------------------------------------------------- */
 
-/**
+/*
  * c67x00_do_work - Schedulers state machine
  */
 static void c67x00_do_work(struct c67x00_hcd *c67x00)

drivers/usb/cdns3/cdns3-ti.c

@@ -2,7 +2,7 @@
 /**
  * cdns3-ti.c - TI specific Glue layer for Cadence USB Controller
  *
- * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com
+ * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com
  */
 
 #include <linux/bits.h>

drivers/usb/cdns3/host.c

@@ -19,7 +19,7 @@ static int __cdns3_host_init(struct cdns3 *cdns)
 	struct platform_device *xhci;
 	int ret;
 
-	cdns3_drd_switch_host(cdns, 1);
+	cdns3_drd_host_on(cdns);
 
 	xhci = platform_device_alloc("xhci-hcd", PLATFORM_DEVID_AUTO);
 	if (!xhci) {
@@ -53,7 +53,7 @@ static void cdns3_host_exit(struct cdns3 *cdns)
 {
 	platform_device_unregister(cdns->host_dev);
 	cdns->host_dev = NULL;
-	cdns3_drd_switch_host(cdns, 0);
+	cdns3_drd_host_off(cdns);
 }
 
 int cdns3_host_init(struct cdns3 *cdns)