- 19 Jul, 2018 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "Lots of fixes, here goes: 1) NULL deref in qtnfmac, from Gustavo A. R. Silva. 2) Kernel oops when fw download fails in rtlwifi, from Ping-Ke Shih. 3) Lost completion messages in AF_XDP, from Magnus Karlsson. 4) Correct bogus self-assignment in rhashtable, from Rishabh Bhatnagar. 5) Fix regression in ipv6 route append handling, from David Ahern. 6) Fix masking in __set_phy_supported(), from Heiner Kallweit. 7) Missing module owner set in x_tables icmp, from Florian Westphal. 8) liquidio's timeouts are HZ dependent, fix from Nicholas Mc Guire. 9) Link setting fixes for sh_eth and ravb, from Vladimir Zapolskiy. 10) Fix NULL deref when using chains in act_csum, from Davide Caratti. 11) XDP_REDIRECT needs to check if the interface is up and whether the MTU is sufficient. From Toshiaki Makita. 12) Net diag can do a double free when killing TCP_NEW_SYN_RECV connections, from Lorenzo Colitti. 13) nf_defrag in ipv6 can unnecessarily hold onto dst entries for a full minute, delaying device unregister. From Eric Dumazet. 14) Update MAC entries in the correct order in ixgbe, from Alexander Duyck. 15) Don't leave partial mangles bpf program in jit_subprogs, from Daniel Borkmann. 16) Fix pfmemalloc SKB state propagation, from Stefano Brivio. 17) Fix ACK handling in DCTCP congestion control, from Yuchung Cheng. 18) Use after free in tun XDP_TX, from Toshiaki Makita. 19) Stale ipv6 header pointer in ipv6 gre code, from Prashant Bhole. 20) Don't reuse remainder of RX page when XDP is set in mlx4, from Saeed Mahameed. 21) Fix window probe handling of TCP rapair sockets, from Stefan Baranoff. 22) Missing socket locking in smc_ioctl(), from Ursula Braun. 23) IPV6_ILA needs DST_CACHE, from Arnd Bergmann. 24) Spectre v1 fix in cxgb3, from Gustavo A. R. Silva. 25) Two spots in ipv6 do a rol32() on a hash value but ignore the result. Fixes from Colin Ian King" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (176 commits) tcp: identify cryptic messages as TCP seq # bugs ptp: fix missing break in switch hv_netvsc: Fix napi reschedule while receive completion is busy MAINTAINERS: Drop inactive Vitaly Bordug's email net: cavium: Add fine-granular dependencies on PCI net: qca_spi: Fix log level if probe fails net: qca_spi: Make sure the QCA7000 reset is triggered net: qca_spi: Avoid packet drop during initial sync ipv6: fix useless rol32 call on hash ipv6: sr: fix useless rol32 call on hash net: sched: Using NULL instead of plain integer net: usb: asix: replace mii_nway_restart in resume path net: cxgb3_main: fix potential Spectre v1 lib/rhashtable: consider param->min_size when setting initial table size net/smc: reset recv timeout after clc handshake net/smc: add error handling for get_user() net/smc: optimize consumer cursor updates net/nfc: Avoid stalls when nfc_alloc_send_skb() returned NULL. ipv6: ila: select CONFIG_DST_CACHE net: usb: rtl8150: demote allmulti message to dev_dbg() ...
-
- 18 Jul, 2018 31 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull DeviceTree fixes from Rob Herring: - Fix phandle cache to work with overlays - Correct the default clock-frequency for QCom geni-i2c - Binding doc quote and spelling fixes * tag 'devicetree-fixes-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: overlay: update phandle cache on overlay apply and remove dt-bindings: Fix unbalanced quotation marks dt-bindings: soc: qcom: Fix default clock-freq for qcom,geni-i2c dt-bindings: w1-gpio: Remove unneeded unit address Documentation: devicetree: tilcdc: fix spelling mistake "suppors" -> "supports"
-
Randy Dunlap authored
Attempt to make cryptic TCP seq number error messages clearer by (1) identifying the source of the message as "TCP", (2) identifying the errors as "seq # bug", and (3) grouping the field identifiers and values by separating them with commas. E.g., the following message is changed from: recvmsg bug 2: copied 73BCB6CD seq 70F17CBE rcvnxt 73BCB9AA fl 0 WARNING: CPU: 2 PID: 1501 at /linux/net/ipv4/tcp.c:1881 tcp_recvmsg+0x649/0xb90 to: TCP recvmsg seq # bug 2: copied 73BCB6CD, seq 70F17CBE, rcvnxt 73BCB9AA, fl 0 WARNING: CPU: 2 PID: 1501 at /linux/net/ipv4/tcp.c:2011 tcp_recvmsg+0x694/0xba0 Suggested-by:
積丹尼 Dan Jacobson <jidanni@jidanni.org> Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Gustavo A. R. Silva authored
It seems that a *break* is missing in order to avoid falling through to the default case. Otherwise, checking *chan* makes no sense. Fixes: 72df7a72 ("ptp: Allow reassigning calibration pin function") Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Haiyang Zhang authored
If out ring is full temporarily and receive completion cannot go out, we may still need to reschedule napi if certain conditions are met. Otherwise the napi poll might be stopped forever, and cause network disconnect. Fixes: 7426b1a5 ("netvsc: optimize receive completions") Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Krzysztof Kozlowski authored
The Vitaly Bordug's email bounces ("ru.mvista.com: Name or service not known") and there was no activity (ack, review, sign) since 2009. Cc: Vitaly Bordug <vitb@kernel.crashing.org> Cc: Pantelis Antoniou <pantelis.antoniou@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexander Sverdlin authored
Add dependencies on PCI where necessary. Fixes: 7e2bc7fb ("net: cavium: Drop dependency of NET_VENDOR_CAVIUM on PCI") Signed-off-by:
Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Stefan Wahren says: ==================== net: qca_spi: Minor bugfixes This patch series contains some minor bugfixes for the qca_spi driver. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stefan Wahren authored
In cases the probing fails the log level of the messages should be an error. Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stefan Wahren authored
In case the SPI thread is not running, a simple reset of sync state won't fix the transmit timeout. We also need to wake up the kernel thread. Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Fixes: ed7d42e2 ("net: qca_spi: fix transmit queue timeout handling") Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stefan Wahren authored
As long as the synchronization with the QCA7000 isn't finished, we cannot accept packets from the upper layers. So let the SPI thread enable the TX queue after sync and avoid unwanted packet drop. Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Fixes: 291ab06e ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
The rol32 call is currently rotating hash but the rol'd value is being discarded. I believe the current code is incorrect and hash should be assigned the rotated value returned from rol32. Thanks to David Lebrun for spotting this. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
The rol32 call is currently rotating hash but the rol'd value is being discarded. I believe the current code is incorrect and hash should be assigned the rotated value returned from rol32. Detected by CoverityScan, CID#1468411 ("Useless call") Fixes: b5facfdb ("ipv6: sr: Compute flowlabel for outer IPv6 header of seg6 encap mode") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by: dlebrun@google.com Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Simon Wunderlich says: ==================== Here are some batman-adv fixes: - Fix gateway refcounting in BATMAN IV and V, by Sven Eckelmann (2 patches) - Fix debugfs paths when renaming interfaces, by Sven Eckelmann (2 patches) - Fix TT flag issues, by Linus Luessing (2 patches) ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
YueHaibing authored
Fixes the following sparse warnings: net/sched/cls_api.c:1101:43: warning: Using plain integer as NULL pointer net/sched/cls_api.c:1492:75: warning: Using plain integer as NULL pointer Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexander Couzens authored
mii_nway_restart is not pm aware which results in a rtnl deadlock. Implement mii_nway_restart manual by setting BMCR_ANRESTART if BMCR_ANENABLE is set. To reproduce: * plug an asix based usb network interface * wait until the device enters PM (~5 sec) * `ip link set eth1 up` will never return Fixes: d9fe64e5 ("net: asix: Add in_pm parameter") Signed-off-by:
Alexander Couzens <lynxis@fe80.eu> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Gustavo A. R. Silva authored
t.qset_idx can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c:2286 cxgb_extension_ioctl() warn: potential spectre issue 'adapter->msix_info' Fix this by sanitizing t.qset_idx before using it to index adapter->msix_info Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Davidlohr Bueso authored
rhashtable_init() currently does not take into account the user-passed min_size parameter unless param->nelem_hint is set as well. As such, the default size (number of buckets) will always be HASH_DEFAULT_SIZE even if the smallest allowed size is larger than that. Remediate this by unconditionally calling into rounded_hashtable_size() and handling things accordingly. Signed-off-by:
Davidlohr Bueso <dbueso@suse.de> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: "Three regression fixes. They're few-liners and fixing some corner cases missed in the origial patches" * tag 'for-4.18-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: scrub: Don't use inode page cache in scrub_handle_errored_block() btrfs: fix use-after-free of cmp workspace pages btrfs: restore uuid_mutex in btrfs_open_devices
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "Miscellaneous bugfixes, plus a small patchlet related to Spectre v2" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvmclock: fix TSC calibration for nested guests KVM: VMX: Mark VMXArea with revision_id of physical CPU even when eVMCS enabled KVM: irqfd: fix race between EPOLLHUP and irq_bypass_register_consumer KVM/Eventfd: Avoid crash when assign and deassign specific eventfd in parallel. x86/kvmclock: set pvti_cpu0_va after enabling kvmclock x86/kvm/Kconfig: Ensure CRYPTO_DEV_CCP_DD state at minimum matches KVM_AMD kvm: nVMX: Restore exit qual for VM-entry failure due to MSR loading x86/kvm/vmx: don't read current->thread.{fs,gs}base of legacy tasks KVM: VMX: support MSR_IA32_ARCH_CAPABILITIES as a feature MSR
-
David S. Miller authored
Ursula Braun says: ==================== net/smc: fixes 2018-07-18 here are small fixes for SMC: The first patch speeds up unidirectional traffic, the second patch increases security, and the third patch fixes a problem for fallback cases. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Karsten Graul authored
During clc handshake the receive timeout is set to CLC_WAIT_TIME. Remember and reset the original timeout value after the receive calls, and remove a duplicate assignment of CLC_WAIT_TIME. Signed-off-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
Ursula Braun <ubraun@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ursula Braun authored
For security reasons the return code of get_user() should always be checked. Fixes: 01d2f7e2 ("net/smc: sockopts TCP_NODELAY and TCP_CORK") Reported-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Ursula Braun <ubraun@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ursula Braun authored
The SMC protocol requires to send a separate consumer cursor update, if it cannot be piggybacked to updates of the producer cursor. Currently the decision to send a separate consumer cursor update just considers the amount of data already received by the socket program. It does not consider the amount of data already arrived, but not yet consumed by the receiver. Basing the decision on the difference between already confirmed and already arrived data (instead of difference between already confirmed and already consumed data), may lead to a somewhat earlier consumer cursor update send in fast unidirectional traffic scenarios, and thus to better throughput. Signed-off-by:
Ursula Braun <ubraun@linux.ibm.com> Suggested-by:
Thomas Richter <tmricht@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tetsuo Handa authored
syzbot is reporting stalls at nfc_llcp_send_ui_frame() [1]. This is because nfc_llcp_send_ui_frame() is retrying the loop without any delay when nonblocking nfc_alloc_send_skb() returned NULL. Since there is no need to use MSG_DONTWAIT if we retry until sock_alloc_send_pskb() succeeds, let's use blocking call. Also, in case an unexpected error occurred, let's break the loop if blocking nfc_alloc_send_skb() failed. [1] https://syzkaller.appspot.com/bug?id=4a131cc571c3733e0eff6bc673f4e36ae48f19c6Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by:
syzbot <syzbot+d29d18215e477cfbfbdd@syzkaller.appspotmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
My randconfig builds came across an old missing dependency for ILA: ERROR: "dst_cache_set_ip6" [net/ipv6/ila/ila.ko] undefined! ERROR: "dst_cache_get" [net/ipv6/ila/ila.ko] undefined! ERROR: "dst_cache_init" [net/ipv6/ila/ila.ko] undefined! ERROR: "dst_cache_destroy" [net/ipv6/ila/ila.ko] undefined! We almost never run into this by accident because randconfig builds end up selecting DST_CACHE from some other tunnel protocol, and this one appears to be the only one missing the explicit 'select'. >From all I can tell, this problem first appeared in linux-4.9 when dst_cache support got added to ILA. Fixes: 79ff2fc3 ("ila: Cache a route to translated address") Cc: Tom Herbert <tom@herbertland.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Peng Hao authored
Inside a nested guest, access to hardware can be slow enough that tsc_read_refs always return ULLONG_MAX, causing tsc_refine_calibration_work to be called periodically and the nested guest to spend a lot of time reading the ACPI timer. However, if the TSC frequency is available from the pvclock page, we can just set X86_FEATURE_TSC_KNOWN_FREQ and avoid the recalibration. 'refine' operation. Suggested-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Peng Hao <peng.hao2@zte.com.cn> [Commit message rewritten. - Paolo] Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Liran Alon authored
When eVMCS is enabled, all VMCS allocated to be used by KVM are marked with revision_id of KVM_EVMCS_VERSION instead of revision_id reported by MSR_IA32_VMX_BASIC. However, even though not explictly documented by TLFS, VMXArea passed as VMXON argument should still be marked with revision_id reported by physical CPU. This issue was found by the following setup: * L0 = KVM which expose eVMCS to it's L1 guest. * L1 = KVM which consume eVMCS reported by L0. This setup caused the following to occur: 1) L1 execute hardware_enable(). 2) hardware_enable() calls kvm_cpu_vmxon() to execute VMXON. 3) L0 intercept L1 VMXON and execute handle_vmon() which notes vmxarea->revision_id != VMCS12_REVISION and therefore fails with nested_vmx_failInvalid() which sets RFLAGS.CF. 4) L1 kvm_cpu_vmxon() don't check RFLAGS.CF for failure and therefore hardware_enable() continues as usual. 5) L1 hardware_enable() then calls ept_sync_global() which executes INVEPT. 6) L0 intercept INVEPT and execute handle_invept() which notes !vmx->nested.vmxon and thus raise a #UD to L1. 7) Raised #UD caused L1 to panic. Reviewed-by:
Krish Sadhukhan <krish.sadhukhan@oracle.com> Cc: stable@vger.kernel.org Fixes: 773e8a04Signed-off-by:
Liran Alon <liran.alon@oracle.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
A comment warning against this bug is there, but the code is not doing what the comment says. Therefore it is possible that an EPOLLHUP races against irq_bypass_register_consumer. The EPOLLHUP handler schedules irqfd_shutdown, and if that runs soon enough, you get a use-after-free. Reported-by:
syzbot <syzkaller@googlegroups.com> Cc: stable@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Reviewed-by:
David Hildenbrand <david@redhat.com>
-
Lan Tianyu authored
Syzbot reports crashes in kvm_irqfd_assign(), caused by use-after-free when kvm_irqfd_assign() and kvm_irqfd_deassign() run in parallel for one specific eventfd. When the assign path hasn't finished but irqfd has been added to kvm->irqfds.items list, another thead may deassign the eventfd and free struct kvm_kernel_irqfd(). The assign path then uses the struct kvm_kernel_irqfd that has been freed by deassign path. To avoid such issue, keep irqfd under kvm->irq_srcu protection after the irqfd has been added to kvm->irqfds.items list, and call synchronize_srcu() in irq_shutdown() to make sure that irqfd has been fully initialized in the assign path. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Tianyu Lan <tianyu.lan@intel.com> Cc: stable@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
David Lechner authored
This driver can spam the kernel log with multiple messages of: net eth0: eth0: allmulti set Usually 4 or 8 at a time (probably because of using ConnMan). This message doesn't seem useful, so let's demote it from dev_info() to dev_dbg(). Signed-off-by:
David Lechner <david@lechnology.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexander Sverdlin authored
octeon_mgmt driver doesn't drop RX frames that are 1-4 bytes bigger than MTU set for the corresponding interface. The problem is in the AGL_GMX_RX0/1_FRM_MAX register setting, which should not account for VLAN tagging. According to Octeon HW manual: "For tagged frames, MAX increases by four bytes for each VLAN found up to a maximum of two VLANs, or MAX + 8 bytes." OCTEON_FRAME_HEADER_LEN "define" is fine for ring buffer management, but should not be used for AGL_GMX_RX0/1_FRM_MAX. The problem could be easily reproduced using "ping" command. If affected system has default MTU 1500, other host (having MTU >= 1504) can successfully "ping" the affected system with payload size 1473-1476, resulting in IP packets of size 1501-1504 accepted by the mgmt driver. Fixed system still accepts IP packets of 1500 bytes even with VLAN tagging, because the limits are lifted in HW as expected, for every VLAN tag. Signed-off-by:
Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 17 Jul, 2018 2 commits
-
-
Linus Torvalds authored
Way back in 4.9, we committed 4cd13c21 ("softirq: Let ksoftirqd do its job"), and ever since we've had small nagging issues with it. For example, we've had: 1ff68820 ("watchdog: core: make sure the watchdog_worker is not deferred") 8d5755b3 ("watchdog: softdog: fire watchdog even if softirqs do not get to run") 217f6974 ("net: busy-poll: allow preemption in sk_busy_loop()") all of which worked around some of the effects of that commit. The DVB people have also complained that the commit causes excessive USB URB latencies, which seems to be due to the USB code using tasklets to schedule USB traffic. This seems to be an issue mainly when already living on the edge, but waiting for ksoftirqd to handle it really does seem to cause excessive latencies. Now Hanna Hawa reports that this issue isn't just limited to USB URB and DVB, but also causes timeout problems for the Marvell SoC team: "I'm facing kernel panic issue while running raid 5 on sata disks connected to Macchiatobin (Marvell community board with Armada-8040 SoC with 4 ARMv8 cores of CA72) Raid 5 built with Marvell DMA engine and async_tx mechanism (ASYNC_TX_DMA [=y]); the DMA driver (mv_xor_v2) uses a tasklet to clean the done descriptors from the queue" The latency problem causes a panic: mv_xor_v2 f0400000.xor: dma_sync_wait: timeout! Kernel panic - not syncing: async_tx_quiesce: DMA error waiting for transaction We've discussed simply just reverting the original commit entirely, and also much more involved solutions (with per-softirq threads etc). This patch is intentionally stupid and fairly limited, because the issue still remains, and the other solutions either got sidetracked or had other issues. We should probably also consider the timer softirqs to be synchronous and not be delayed to ksoftirqd (since they were the issue with the earlier watchdog problems), but that should be done as a separate patch. This does only the tasklet cases. Reported-and-tested-by:
Hanna Hawa <hannah@marvell.com> Reported-and-tested-by:
Josef Griebichler <griebichler.josef@gmx.at> Reported-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Eric Dumazet <edumazet@google.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Qu Wenruo authored
In commit ac0b4145 ("btrfs: scrub: Don't use inode pages for device replace") we removed the branch of copy_nocow_pages() to avoid corruption for compressed nodatasum extents. However above commit only solves the problem in scrub_extent(), if during scrub_pages() we failed to read some pages, sctx->no_io_error_seen will be non-zero and we go to fixup function scrub_handle_errored_block(). In scrub_handle_errored_block(), for sctx without csum (no matter if we're doing replace or scrub) we go to scrub_fixup_nodatasum() routine, which does the similar thing with copy_nocow_pages(), but does it without the extra check in copy_nocow_pages() routine. So for test cases like btrfs/100, where we emulate read errors during replace/scrub, we could corrupt compressed extent data again. This patch will fix it just by avoiding any "optimization" for nodatasum, just falls back to the normal fixup routine by try read from any good copy. This also solves WARN_ON() or dead lock caused by lame backref iteration in scrub_fixup_nodatasum() routine. The deadlock or WARN_ON() won't be triggered before commit ac0b4145 ("btrfs: scrub: Don't use inode pages for device replace") since copy_nocow_pages() have better locking and extra check for data extent, and it's already doing the fixup work by try to read data from any good copy, so it won't go scrub_fixup_nodatasum() anyway. This patch disables the faulty code and will be removed completely in a followup patch. Fixes: ac0b4145 ("btrfs: scrub: Don't use inode pages for device replace") Signed-off-by:
Qu Wenruo <wqu@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
- 16 Jul, 2018 6 commits
-
-
Ursula Braun authored
SMC ioctl processing requires the sock lock to work properly in all thinkable scenarios. Problem has been found with RaceFuzzer and fixes: KASAN: null-ptr-deref Read in smc_ioctl Reported-by:
Byoungyoung Lee <lifeasageek@gmail.com> Reported-by: syzbot+35b2c5aa76fd398b9fd4@syzkaller.appspotmail.com Signed-off-by:
Ursula Braun <ubraun@linux.ibm.com> Reviewed-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Siva Reddy Kallam says: ==================== tg3: Update copyright and fix for tx timeout with 5762 First patch: Update copyright Second patch: Add higher cpu clock for 5762 ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sanjeev Bansal authored
This patch has fix for TX timeout while running bi-directional traffic with 100 Mbps using 5762. Signed-off-by:
Sanjeev Bansal <sanjeevb.bansal@broadcom.com> Signed-off-by:
Siva Reddy Kallam <siva.kallam@broadcom.com> Reviewed-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Siva Reddy Kallam authored
Signed-off-by:
Siva Reddy Kallam <siva.kallam@broadcom.com> Reviewed-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
John Allen authored
Testing has uncovered a failure case that is not handled properly. In the event that a login fails and we are not able to recover on the spot, we return 0 from do_reset, preventing any error recovery code from being triggered. Additionally, the state is set to "probed" meaning that when we are able to trigger the error recovery, the driver always comes up in the probed state. To handle the case properly, we need to return a failure code here and set the adapter state to the state that we entered the reset in indicating the state that we would like to come out of the recovery reset in. Signed-off-by:
John Allen <jallen@linux.vnet.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stefan Wahren authored
The skb size calculation in lan78xx_tx_bh is in race with the start_xmit, which could lead to rare kernel oopses. So protect the whole skb walk with a spin lock. As a benefit we can unlink the skb directly. This patch was tested on Raspberry Pi 3B+ Link: https://github.com/raspberrypi/linux/issues/2608 Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Floris Bos <bos@je-eigen-domein.nl> Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-