- 09 May, 2014 36 commits
-
-
David S. Miller authored
Wang Weidong says: ==================== sctp: fix kfree static array pointer in sctp_sysctl_net_unregister patch #1 revert the efb842c4("sctp: optimize the sctp_sysctl_net_register") patch #2 add a checking for sctp_sysctl_net_register ==================== Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
wangweidong authored
When register_net_sysctl failed, we should free the sysctl_table. Signed-off-by:
Wang Weidong <wangweidong1@huawei.com> Signed-off-by:
-
wangweidong authored
This revert commit efb842c4("sctp: optimize the sctp_sysctl_net_register"), Since it doesn't kmemdup a sysctl_table for init_net, so the init_net->sctp.sysctl_header->ctl_table_arg points to sctp_net_table which is a static array pointer. So when doing sctp_sysctl_net_unregister, it will free sctp_net_table, then we will get a NULL pointer dereference like that: [ 262.948220] BUG: unable to handle kernel NULL pointer dereference at 000000000000006c [ 262.948232] IP: [<ffffffff81144b70>] kfree+0x80/0x420 [ 262.948260] PGD db80a067 PUD dae12067 PMD 0 [ 262.948268] Oops: 0000 [#1] SMP [ 262.948273] Modules linked in: sctp(-) crc32c_generic libcrc32c ... [ 262.948338] task: ffff8800db830190 ti: ffff8800dad00000 task.ti: ffff8800dad00000 [ 262.948344] RIP: 0010:[<ffffffff81144b70>] [<ffffffff81144b70>] kfree+0x80/0x420 [ 262.948353] RSP: 0018:ffff8800dad01d88 EFLAGS: 00010046 [ 262.948358] RAX: 0100000000000000 RBX: ffffffffa0227940 RCX: ffffea0000707888 [ 262.948363] RDX: ffffea0000707888 RSI: 0000000000000001 RDI: ffffffffa0227940 [ 262.948369] RBP: ffff8800dad01de8 R08: 0000000000000000 R09: ffff8800d9e983a9 [ 262.948374] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffa0227940 [ 262.948380] R13: ffffffff8187cfc0 R14: 0000000000000000 R15: ffffffff8187da10 [ 262.948386] FS: 00007fa2a2658700(0000) GS:ffff880112800000(0000) knlGS:0000000000000000 [ 262.948394] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 262.948400] CR2: 000000000000006c CR3: 00000000cddc0000 CR4: 00000000000006e0 [ 262.948410] Stack: [ 262.948413] ffff8800dad01da8 0000000000000286 0000000020227940 ffffffffa0227940 [ 262.948422] ffff8800dad01dd8 ffffffff811b7fa1 ffffffffa0227940 ffffffffa0227940 [ 262.948431] ffffffff8187d960 ffffffff8187cfc0 ffffffff8187d960 ffffffff8187da10 [ 262.948440] Call Trace: [ 262.948457] [<ffffffff811b7fa1>] ? unregister_sysctl_table+0x51/0xa0 [ 262.948476] [<ffffffffa020d1a1>] sctp_sysctl_net_unregister+0x21/0x30 [sctp] [ 262.948490] [<ffffffffa020ef6d>] sctp_net_exit+0x12d/0x150 [sctp] [ 262.948512] [<ffffffff81394f49>] ops_exit_list+0x39/0x60 [ 262.948522] [<ffffffff813951ed>] unregister_pernet_operations+0x3d/0x70 [ 262.948530] [<ffffffff81395292>] unregister_pernet_subsys+0x22/0x40 [ 262.948544] [<ffffffffa020efcc>] sctp_exit+0x3c/0x12d [sctp] [ 262.948562] [<ffffffff810c5e04>] SyS_delete_module+0x194/0x210 [ 262.948577] [<ffffffff81240fde>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 262.948587] [<ffffffff815217a2>] system_call_fastpath+0x16/0x1b With this revert, it won't occur the Oops. Signed-off-by:
-
Arnd Bergmann authored
commit 6d48f44b "mdio_bus: implement devm_mdiobus_alloc/devm_mdiobus_free" introduced a new function devm_mdiobus_alloc_size() but added an export for a different function devm_mdiobus_alloc(), which was obviously a simple mistake that leads to build error whenever this function is used from a loadable module: ERROR: "devm_mdiobus_alloc_size" [drivers/net/ethernet/ti/davinci_mdio.ko] undefined! Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: Lad, Prabhakar <prabhakar.csengg@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Acked-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Nikolay Aleksandrov authored
Introduce a generic option store function for sysfs and remove the specific ones. The attribute name is used to match against the option which is to be set. Also adjust the "name" of tlb_dynamic_lb option to match the sysfs entry and fix the comments and comment style in bond_sysfs.c The comments which showed obvious behaviour (i.e. behaviour that's seen in the option's entry) are removed, the ones that explained important points about the setting function have been moved above the respective set function in bond_options.c There's only 1 exception: num_unsol_na/num_grat_arp since it has 2 names CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: David S. Miller <davem@davemloft.net> Signed-off-by:
Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by:
-
wangweidong authored
unregister_net_sysctl_table will check the ctl_table_header, so remove the unneed checking Signed-off-by:
-
David S. Miller authored
Sathya Perla says: ==================== be2net: patch set This patch set contains the following modificatons: * three patches (1/7 to 3/7) that fix indentation style issues * convert the u8 vlan[] array to a bit-map to reduce memory usage * use MCCQ instead of MBOX in be_cmd_rss_config() as the MCCQ is already created by that time * include rx-comp-error counter in ethtool stats * remove the unused promiscuous setting from be_cmd_vlan_config() Pls apply to net-next tree. Thanks! ==================== Signed-off-by: -
Kalesh AP authored
be_cmd_rss_config() is called after the MCCQ is created; so this cmd is now modified to use the MCCQ instead of MBOX. Also fixed some indentation problem in this routine. Signed-off-by:
Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
-
Kalesh AP authored
Signed-off-by:
-
Kalesh AP authored
For putting interface into vlan promiscuous mode, we use be_cmd_rx_filter() and not be_cmd_vlan_config(). So remove the "promiscuous" argument from be_cmd_vlan_config(). Signed-off-by:
-
Ravikumar Nelavelli authored
This patch converts the vlan u8[] used to track vlan-id membership to a bit-map as it reduces memory usage. Signed-off-by:
Ravikumar Nelavelli <ravikumar.nelavelli@emulex.com> Signed-off-by:
-
Sathya Perla authored
When a funtion definition or a function call spans more than one line, ensure that the first argument on the subsequent lines is aligned to the first column after the opening paranthesis of the function call. Also removes unnecessary line wrap. Signed-off-by:
-
Sathya Perla authored
When a funtion definition or a function call spans more than one line, ensure that the first argument on the subsequent lines is aligned to the first column after the opening paranthesis of the function call. Signed-off-by:
-
Sathya Perla authored
When a funtion definition or a function call spans more than one line, ensure that the first argument on the subsequent lines is aligned to the first column after the opening paranthesis of the function call. Also remove unnecessary line wrap. Signed-off-by:
-
David S. Miller authored
Rajesh Borundia says: ==================== qlcnic: SR-IOV and FW-dump enhancements This patch series contain following enhancements. * SR-IOV enhancements: - Allow SR-IOV VF's to probe in hypervisor. SR-IOV VF can be uplinked to bridge/macvtap device with this change. - Commands from VF are processed in process context as it may sleep during PF-VF communication. Earlier we use to process qlcnic_sriov_vf_set_multi function in process context but now we process individual commands. - As SR-IOV VF's can be uplinked to bridge/macvtap device support mac-learning to allow communication through embedded switch. * FW-dump enhancement: - Support to collect RDMEM section of firmware dump using PEX DMA method for 82xx series adapter. * Changes in v2: - Removed unnecessary cast from void pointer to something else and verified this issue in entire patch series as per David Miller's suggestion. Please apply this series to net-next. ==================== Signed-off-by: -
Rajesh Borundia authored
Signed-off-by:
Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by:
-
Shahed Shaikh authored
o Add support to collect RDMEM section of firmware dump using PEX DMA method. o This patch uses most of the code used for PEX DMA support on 83xx series adapters and some refactoring. Signed-off-by:
Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by:
-
Rajesh Borundia authored
o SR-IOV VF can be uplinked to bridge/macvtap device. Enable mac learning to support communication through embedded switch. o Learn vlan filters based on QLCNIC_VLAN_FILTERING flag. Signed-off-by:
-
Rajesh Borundia authored
o Commands from VF may sleep during PF-VF communication. Earlier we use to process qlcnic_sriov_vf_set_multi function in process context. Now individual commands that are called in atomic context are processed in process context without waiting for completion of command. Signed-off-by:
-
Rajesh Borundia authored
o Add support for SR-IOV VF probe in hypervisor to enable assignment of VFs within hypervisor. o SR-IOV VF can be uplinked to bridge/macvtap device with this change. o Refactor SR-IOV enable/disable code. We cannot take rtnl lock while enabling/disabling SR-IOV as VF probe will take an rtnl lock. o Disable spoofchk by default. Signed-off-by:
-
David S. Miller authored
Ying Xue says: ==================== tipc: overhaul node action flags We currently have two problems with the node flags field: - The naming of the individual action flags is unclear and confusing - The flags are often not cleared individually, making it hard to follow where this happens. So the series aims to solve above two problems. ==================== Signed-off-by: -
Ying Xue authored
Each node action flag should be set or cleared separately, instead we now set the whole flags variable in one shot, and it's turned out to be hard to see which other flags are affected. Therefore, for instance, we explicitly clear TIPC_WAIT_OWN_LINKS_DOWN bit in node_lost_contact(). Signed-off-by:
Ying Xue <ying.xue@windriver.com> Reviewed-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Ying Xue authored
Rename node flags to action_flags as well as its enum names so that they can reflect its real meanings. Signed-off-by:
-
David S. Miller authored
Tom Herbert says: ==================== net: Checksum offload changes - Part II I am working on overhauling RX checksum offload. Goals of this effort are: - Specify what exactly it means when driver returns CHECKSUM_UNNECESSARY - Preserve CHECKSUM_COMPLETE through encapsulation layers - Don't do skb_checksum more than once per packet - Unify GRO and non-GRO csum verification as much as possible - Unify the checksum functions (checksum_init) - Simply code What is in this second patch set: - Call common inet checksum validation functions in ICMP{4,6}, GRE{4,6}, and IGMP. - In UDP, verify checksum before handing off to encap_rcv. - Remove custom UDP checksum validation code in L2TP. Please review carefully and test if possible, mucking with basic checksum functions is always a little precarious :-) ==================== Signed-off-by: -
Tom Herbert authored
Validating the UDP checksum is now done in UDP before handing packets to the encapsulation layer. Note that this also eliminates the "feature" where L2TP can ignore a non-zero UDP checksum (doing this was contrary to RFC 1122). Signed-off-by:
Tom Herbert <therbert@google.com> Signed-off-by:
-
Tom Herbert authored
Moving validation of UDP checksum to be done in UDP not encap layer. Signed-off-by:
-
Tom Herbert authored
Use skb_checksum_validate to verify checksum. Signed-off-by:
-
Tom Herbert authored
Use skb_checksum_simple_validate to verify checksum. Signed-off-by:
-
Tom Herbert authored
Use skb_checksum_simple_validate to verify checksum. Signed-off-by:
-
Tom Herbert authored
Use skb_checksum_simple_validate to verify checksum. Signed-off-by:
-
Tom Herbert authored
Use skb_checksum_simple_validate to verify checksum. Signed-off-by:
-
Joe Perches authored
Use a more current logging style. o Coalesce formats o Add missing spaces for coalesced formats o Align arguments for modified formats o Add missing newlines for some logging messages o Use DRV_NAME as part of format instead of %s, DRV_NAME to reduce overall text. o Use ..., ##__VA_ARGS__ instead of args... in macros o Correct a few format typos o Use a single line message where appropriate Signed-off-by:
Joe Perches <joe@perches.com> Acked-By:
Amir Vadai <amirv@mellanox.com> Signed-off-by:
-
dingtianhong authored
Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
Ding Tianhong <dingtianhong@huawei.com> Signed-off-by:
-
dingtianhong authored
The argument slave is not used for slave_do_arp_validate_only(), so no need to keep it, make the function more simple. Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
-
dingtianhong authored
Move the structure bond_net forward, and remove the unnecessary structure declaration. Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
-
WANG Cong authored
All the callers hold RTNL lock, so there is no need to use inet_addr_hash_lock to protect the hash list. Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
- 07 May, 2014 4 commits
-
-
Harish Patil authored
Commit 1f0f467b "qlcnic: Add hwmon interface to export board temperature" introduced a randconfig build error in the case when the hwmon framework is built as a module and the qlcnic driver itself is built-in: drivers/built-in.o: In function `qlcnic_register_hwmon_dev': drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c:1301: undefined reference to `hwmon_device_register_with_groups' drivers/built-in.o: In function `qlcnic_unregister_hwmon_dev': drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c:1309: undefined reference to `hwmon_device_unregister'. This changes the Kconfig logic to enforce that the qlcnic hwmon support can only be enabled if it is possible to successfully build it. Signed-off-by:
Harish Patil <harish.patil@qlogic.com> Reported-by:
-
David S. Miller authored
Hubert Chaumette says: ==================== net/phy: micrel: Add DT configuration support and documentation for KSZ9031 - Adds DT configuration support for ksz9031 - Renames micrel-ksz9021.txt to micrel-ksz90x1.txt and adds ksz9031 binding documentation Changes since v3: - Rebased on net-next Changes since v2: - Merged together ksz9031_load_{clk,data,ctrl}_skew_values() - Added field length and number of fields prameter to account for registers specificities - Added binding documentation Changes since v1: - Removed ksz9021 and ksz9031 fixup deletions from arch/arm/mach-imx/mach-imx6q.c Hubert Chaumette (2): Update Micrel KSZ90x1 binding documentation ARM: i.MX6: Add OF configuration support for ksz9031 ==================== Signed-off-by: -
Hubert Chaumette authored
Adds support for ksz9031 PAD skew configuration over devicetree. Signed-off-by:
Hubert Chaumette <hchaumette@adeneo-embedded.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Hubert Chaumette authored
Renames micrel-ksz9021.txt to micrel-ksz90x1.txt and adds documentation for the KSZ9031 binding from patch 1. Also adds step increment information, and note about phy fixups. Signed-off-by:
-
