- 09 Jan, 2017 40 commits
-
-
Tomas Winkler authored
commit 9ff2007b upstream. Add MEI Lewisburg PCH IDs for Purley based workstations. Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Usyskin authored
commit d5f8e166 upstream. pm_runtime_autosuspend can take synchronous or asynchronous paths, Because we are calling pm_runtime_mark_last_busy just before this most of the cases it takes the asynchronous way. However, when the FW or driver resets during already running runtime suspend, the call will result in calling to the driver's rpm callback and results in a deadlock on device_lock. The simplest fix is to replace pm_runtime_autosuspend with asynchronous pm_request_autosuspend. Signed-off-by:
-
Russell Currey authored
commit 298360af upstream. ast_get_dram_info() configures a window in order to access BMC memory. A BMC register can be configured to disallow this, and if so, causes an infinite loop in the ast driver which renders the system unusable. Fix this by erroring out if an error is detected. On powerpc systems with EEH, this leads to the device being fenced and the system continuing to operate. Signed-off-by:
Russell Currey <ruscur@russell.cc> Reviewed-by:
Joel Stanley <joel@jms.id.au> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161215051241.20815-1-ruscur@russell.ccSigned-off-by:
-
Rex Zhu authored
commit 202e0b22 upstream. set valid data to mmRLC_SRM_INDEX_CNTL_ADDRx/DATAx. Signed-off-by:
Rex Zhu <Rex.Zhu@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Rex Zhu authored
commit eb584241 upstream. the CP_PG_DISABLE bit was reversed. Signed-off-by:
-
Hawking Zhang authored
commit 10e2ca34 upstream. If vBIOS noFan bit is set, the fan table parameters in thermal controller will not get initialized. The driver should avoid to use these uninitialized parameter to do calculation. Otherwise, it may trigger divide 0 error. Signed-off-by:
Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by:
-
Patrik Jakobsson authored
commit 0a97c81a upstream. Hook up drm_compat_ioctl to support 32-bit userspace on 64-bit kernels. It turns out that N2600 and N2800 comes with 64-bit enabled. We previously assumed there where no such systems out there. Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20161101144315.2955-1-patrik.r.jakobsson@gmail.comSigned-off-by:
-
Alex Deucher authored
commit abb2e3c1 upstream. New variant. Signed-off-by:
-
Alex Deucher authored
commit 8729675c upstream. New variant. Signed-off-by:
-
Michel Dänzer authored
commit 6b16cf77 upstream. Fixes hangs in that case under some circumstances. v2: * Only use non-0 x/yorigin if the cursor is (partially) outside of the top/left edge of the total surface with AVIVO/DCE Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1000433Signed-off-by:
Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1) Signed-off-by:
-
Michel Dänzer authored
commit dcab0fa6 upstream. The cursor size also affects the register programming. Signed-off-by:
-
Ben Skeggs authored
commit b27add13 upstream. This avoids an issue that occurs when we're attempting to preempt multiple channels simultaneously. HW seems to ignore preempt requests while it's still processing a previous one, which, well, makes sense. Fixes random "fifo: SCHED_ERROR 0d []" + GPCCS page faults during parallel piglit runs on (at least) GM107. Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Ben Skeggs authored
commit 5b3800a6 upstream. DPAUX registers moved on Kepler, these chipsets were still using the Fermi implementation for some reason. This fixes detection of hotplug/sink IRQs on DP connectors. Signed-off-by:
-
Ben Skeggs authored
commit 10dcab3e upstream. TTM was changed a while back to allow for pipelining of buffer moves, and part of this was the removal of waiting for a BO to idle before calling move(), placing the responsibility on the driver to do this if required. That's all well and good, except, we make use of move_notify() to handle mapping/unmapping from the GPU VMM as move() isn't called on all paths. This commit adds a wait before unmapping from a VMM in move_notify(), to prevent GPU page faults where a buffer is still being accessed. Signed-off-by:
-
Ben Skeggs authored
commit f4e65efc upstream. Signed-off-by:
-
Ben Skeggs authored
commit 5dc7f4aa upstream. Signed-off-by:
-
Ben Skeggs authored
commit 768e8477 upstream. Signed-off-by:
-
Alexandre Courbot authored
commit e137040e upstream. Look for firmware files using the legacy ("nouveau/nvxx_fucxxxx") path if they cannot be found in the new, "official" path. User setups were broken by the switch, which is bad. There are only 4 firmware files we may want to look up that way, so hardcode them into the lookup function. All new firmware files should use the standard "nvidia/<chip>/gr/" path. Fixes: 8539b37a ("drm/nouveau/gr: use NVIDIA-provided external firmwares") Signed-off-by:
Alexandre Courbot <acourbot@nvidia.com> Signed-off-by:
-
Arindam Nath authored
commit dd31ae9a upstream. GUI idle interrupts should be enabled only after we have enabled coarse grain clock gating (CGCG). This prevents GFX engine generating idle interrupt even though CGCG is not completely enabled. Most of the time this goes un-noticed, but on some Stoney ASICs this results in GFX engine hang after system resumes from suspend. The issue is not particular to Stoney though and could have occured on any ASIC. The patch fixes this issue. Reviewed-by:
Sunil Uttarwar <Sunil.Uttarwar1@amd.com> Signed-off-by:
Arindam Nath <arindam.nath@amd.com> Signed-off-by:
-
Michel Dänzer authored
commit 8b02cde9 upstream. The cursor size also affects the register programming. Signed-off-by:
-
Michel Dänzer authored
commit 8e57ec61 upstream. We were storing viewport relative coordinates. However, crtc_cursor_set2 and cursor_reset pass amdgpu_crtc->cursor_x/y as the x/y parameters of cursor_move_locked, which would break if the CRTC isn't located at (0, 0). Signed-off-by:
-
Alex Deucher authored
commit ce66cb1e upstream. New variant. Signed-off-by:
-
Alex Deucher authored
commit 5a23f272 upstream. New variant. Signed-off-by:
-
Hans de Goede authored
commit 6276e53f upstream. The HP Pavilion dv6 has a non-working acpi_video0 backlight interface and an intel_backlight interface which works fine. Add a force_native quirk for it so that the non-working acpi_video0 interface does not get registered. Note that there are quite a few HP Pavilion dv6 variants, some woth ATI and some with NVIDIA hybrid gfx, both seem to need this quirk to have working backlight control. There are also some versions with only Intel integrated gfx, these may not need this quirk, but it should not hurt there. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1204476 Link: https://bugs.launchpad.net/ubuntu/+source/linux-lts-trusty/+bug/1416940Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Hans de Goede authored
commit 350fa038 upstream. The Dell XPS 17 L702X has a non-working acpi_video0 backlight interface and an intel_backlight interface which works fine. Add a force_native quirk for it so that the non-working acpi_video0 interface does not get registered. Note that there also is an issue with the brightnesskeys on this laptop, they do not generate key-press events in anyway. That is not solved by this patch. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1123661Signed-off-by:
-
Ian Abbott authored
commit 857a6610 upstream. Commit 0557344e ("staging: comedi: ni_mio_common: fix local var for 32-bit read") changed the type of local variable `d` from `unsigned short` to `unsigned int` to fix a bug introduced in commit 9c340ac9 ("staging: comedi: ni_stc.h: add read/write callbacks to struct ni_private") when reading AI data for NI PCI-6110 and PCI-6111 cards. Unfortunately, other parts of the function rely on the variable being `unsigned short` when an offset value in local variable `signbits` is added to `d` before writing the value to the `data` array: d += signbits; data[n] = d; The `signbits` variable will be non-zero in bipolar mode, and is used to convert the hardware's 2's complement, 16-bit numbers to Comedi's straight binary sample format (with 0 representing the most negative voltage). This breaks because `d` is now 32 bits wide instead of 16 bits wide, so after the addition of `signbits`, `data[n]` ends up being set to values above 65536 for negative voltages. This affects all supported "E series" cards except PCI-6143 (and PXI-6143). Fix it by ANDing the value written to the `data[n]` with the mask 0xffff. Fixes: 0557344e ("staging: comedi: ni_mio_common: fix local var for 32-bit read") Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Ian Abbott authored
commit 655c4d44 upstream. For NI M Series cards, the Comedi `insn_read` handler for the AI subdevice is broken due to ANDing the value read from the AI FIFO data register with an incorrect mask. The incorrect mask clears all but the most significant bit of the sample data. It should preserve all the sample data bits. Correct it. Fixes: 817144ae ("staging: comedi: ni_mio_common: remove unnecessary use of 'board->adbits'") Signed-off-by:
-
Arnd Bergmann authored
commit b8cb86fd upstream. James Simmons reports: > The ldlm_pool field pl_recalc_time is set to the current > monotonic clock value but the interval period is calculated > with the wall clock. This means the interval period will > always be far larger than the pl_recalc_period, which is > just a small interval time period. The correct thing to > do is to use monotomic clock current value instead of the > wall clocks value when calculating recalc_interval_sec. This broke when I converted the 32-bit get_seconds() into ktime_get_{real_,}seconds() inconsistently. Either one of those two would have worked, but mixing them does not. Staying with the original intention of the patch, this changes the ktime_get_seconds() calls into ktime_get_real_seconds(), using real time instead of mononic time. Fixes: 8f83409c ("staging/lustre: use 64-bit time for pl_recalc") Reported-by:
James Simmons <jsimmons@infradead.org> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
Oleg Drokin authored
commit cd15dd6e upstream. I have been having a lot of unexplainable crashes in osc_lru_shrink lately that I could not see a good explanation for and then I found this patch that slip under the radar somehow that incorrectly converted while loop for lru list iteration into list_for_each_entry_safe totally ignoring that in the body of the loop we drop spinlocks guarding this list and move list entries around. Not sure why it was not showing up right away, perhaps some of the more recent LRU changes committed caused some extra pressure on this code that finally highlighted the breakage. Reverts: 8adddc36 ("staging: lustre: osc: Use list_for_each_entry_safe") CC: Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Signed-off-by:
Oleg Drokin <green@linuxhacker.ru> Signed-off-by:
-
Vitaly Kuznetsov authored
commit abd1026d upstream. "kernel BUG at drivers/hv/channel_mgmt.c:350!" is observed when hv_vmbus module is unloaded. BUG_ON() was introduced in commit 85d9aa70 ("Drivers: hv: vmbus: add an API vmbus_hvsock_device_unregister()") as vmbus_free_channels() codepath was apparently forgotten. Fixes: 85d9aa70 ("Drivers: hv: vmbus: add an API vmbus_hvsock_device_unregister()") Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Dmitry Shachnev authored
commit 217e2bfa upstream. In docutils 0.13, the return type of get_column_widths method of the Table directive has changed [1], which breaks our flat-table directive and leads to a TypeError when trying to build the docs [2]. This patch adds support for the new return type, while keeping support for older docutils versions too. [1] https://sourceforge.net/p/docutils/patches/120/ [2] https://sourceforge.net/p/docutils/bugs/303/Signed-off-by:
Dmitry Shachnev <mitya57@debian.org> Signed-off-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
Krzysztof Kozlowski authored
commit f37fabb8 upstream. In the critical sysfs entry the thermal hwmon was returning wrong temperature to the user-space. It was reporting the temperature of the first trip point instead of the temperature of critical trip point. For example: /sys/class/hwmon/hwmon0/temp1_crit:50000 /sys/class/thermal/thermal_zone0/trip_point_0_temp:50000 /sys/class/thermal/thermal_zone0/trip_point_0_type:active /sys/class/thermal/thermal_zone0/trip_point_3_temp:120000 /sys/class/thermal/thermal_zone0/trip_point_3_type:critical Since commit e68b16ab ("thermal: add hwmon sysfs I/F") the driver have been registering a sysfs entry if get_crit_temp() callback was provided. However when accessed, it was calling get_trip_temp() instead of the get_crit_temp(). Fixes: e68b16ab ("thermal: add hwmon sysfs I/F") Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
Zhang Rui <rui.zhang@intel.com> Signed-off-by:
-
Boris Brezillon authored
commit 68af4fa8 upstream. bcm2835_pll_divider_off() is resetting the divider field in the A2W reg to zero when disabling the clock. Make sure we preserve this value by reading the previous a2w_reg value first and ORing the result with A2W_PLL_CHANNEL_DISABLE. Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Fixes: 41691b88 ("clk: bcm2835: Add support for programming the audio domain clocks") Reviewed-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Alexandre Courbot authored
commit 5e6b9a89 upstream. Add the VDD_GPU regulator (a GPIO-enabled PWM regulator) to the Jetson TX1 board. This addition allows the GPU to be used provided the bootloader properly enabled the GPU node. Signed-off-by:
Thierry Reding <treding@nvidia.com> [as pointed out by Thierry on IRC, nobody has reported a bug in the field, but using a new bootloader with a .dtb that has the incorrect data, it will crash on boot] Fixes: 336f79c7 ("arm64: tegra: Add NVIDIA Jetson TX1 Developer Kit support") Signed-off-by:
-
Lars-Peter Clausen authored
commit f4e81c52 upstream. The GPIO chardev is used for management tasks (allocating line and event handles) and does neither support read() nor write() operations. Hence it does not make much sense to allow seek operations. Currently the chardev uses noop_llseek() for its seek implementation. This function does not move the pointer and simply returns the current position (always 0 for the GPIO chardev). noop_llseek() is primarily meant for devices that can not support seek, but where there might be a user that depends on the seek() operation succeeding. For newly added devices that can not support seek operations it is recommended to use no_llseek(), which will return an error. For more information see commit 6038f373 ("llseek: automatically add .llseek fop"). Unfortunately this was overlooked when the GPIO chardev ABI was introduced. But it is highly unlikely that since then userspace applications have appeared that rely on being able to perform non-failing seek operations on a GPIO chardev file descriptor. So it should be safe to change from noop_llseel() to no_seek(). Also use nonseekable_open() in the chardev open() callback to clear the FMODE_SEEK, FMODE_PREAD and FMODE_PWRITE flags from the file. Neither of these should be set on a file that does not support seek operations. Fixes: 3c702e99 ("gpio: add a userspace chardev ABI for GPIOs") Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Linus Walleij authored
commit 1516c635 upstream. commit 43db289d ("gpio: stmpe: Rework registers access") reworked the STMPE register access so as to use [STMPE_IDX_*_LSB + i] to access the 8bit register for a certain bank, assuming the CSB and MSB will follow after the enumerator. For this to work the index needs to go from (size-1) to 0 not 0 to (size-1). However for the GPIO IRQ handler, the status registers we read register MSB + 3 bytes ahead for the 24 bit GPIOs and index registers from MSB upwards and run an index i over the registers UNLESS we are STMPE1600. This is not working when we get to clearing the interrupt EDGE status register STMPE_IDX_GPEDR_[LCM]SB: it is indexed like all other registers [STMPE_IDX_*_LSB + i] but in this loop we index from 0 to get the right bank index for the calculations, and we need to just add i to the MSB. Before this, interrupts on the STMPE2401 were broken, this patch fixes it so it works again. Cc: Patrice Chotard <patrice.chotard@st.com> Fixes: 43db289d ("gpio: stmpe: Rework registers access") Signed-off-by:
-
Thomas Gleixner authored
commit 9c164572 upstream. The clocksource delta to nanoseconds conversion is using signed math, but the delta is unsigned. This makes the conversion space smaller than necessary and in case of a multiplication overflow the conversion can become negative. The conversion is done with scaled math: s64 nsec_delta = ((s64)clkdelta * clk->mult) >> clk->shift; Shifting a signed integer right obvioulsy preserves the sign, which has interesting consequences: - Time jumps backwards - __iter_div_u64_rem() which is used in one of the calling code pathes will take forever to piecewise calculate the seconds/nanoseconds part. This has been reported by several people with different scenarios: David observed that when stopping a VM with a debugger: "It was essentially the stopped by debugger case. I forget exactly why, but the guest was being explicitly stopped from outside, it wasn't just scheduling lag. I think it was something in the vicinity of 10 minutes stopped." When lifting the stop the machine went dead. The stopped by debugger case is not really interesting, but nevertheless it would be a good thing not to die completely. But this was also observed on a live system by Liav: "When the OS is too overloaded, delta will get a high enough value for the msb of the sum delta * tkr->mult + tkr->xtime_nsec to be set, and so after the shift the nsec variable will gain a value similar to 0xffffffffff000000." Unfortunately this has been reintroduced recently with commit 6bd58f09 ("time: Add cycles to nanoseconds translation"). It had been fixed a year ago already in commit 35a4933a ("time: Avoid signed overflow in timekeeping_get_ns()"). Though it's not surprising that the issue has been reintroduced because the function itself and the whole call chain uses s64 for the result and the propagation of it. The change in this recent commit is subtle: s64 nsec; - nsec = (d * m + n) >> s: + nsec = d * m + n; + nsec >>= s; d being type of cycle_t adds another level of obfuscation. This wouldn't have happened if the previous change to unsigned computation would have made the 'nsec' variable u64 right away and a follow up patch had cleaned up the whole call chain. There have been patches submitted which basically did a revert of the above patch leaving everything else unchanged as signed. Back to square one. This spawned a admittedly pointless discussion about potential users which rely on the unsigned behaviour until someone pointed out that it had been fixed before. The changelogs of said patches added further confusion as they made finally false claims about the consequences for eventual users which expect signed results. Despite delta being cycle_t, aka. u64, it's very well possible to hand in a signed negative value and the signed computation will happily return the correct result. But nobody actually sat down and analyzed the code which was added as user after the propably unintended signed conversion. Though in sensitive code like this it's better to analyze it proper and make sure that nothing relies on this than hunting the subtle wreckage half a year later. After analyzing all call chains it stands that no caller can hand in a negative value (which actually would work due to the s64 cast) and rely on the signed math to do the right thing. Change the conversion function to unsigned math. The conversion of all call chains is done in a follow up patch. This solves the starvation issue, which was caused by the negative result, but it does not solve the underlying problem. It merily procrastinates it. When the timekeeper update is deferred long enough that the unsigned multiplication overflows, then time going backwards is observable again. It does neither solve the issue of clocksources with a small counter width which will wrap around possibly several times and cause random time stamps to be generated. But those are usually not found on systems used for virtualization, so this is likely a non issue. I took the liberty to claim authorship for this simply because analyzing all callsites and writing the changelog took substantially more time than just making the simple s/s64/u64/ change and ignore the rest. Fixes: 6bd58f09 ("time: Add cycles to nanoseconds translation") Reported-by:
David Gibson <david@gibson.dropbear.id.au> Reported-by:
Liav Rehana <liavr@mellanox.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Parit Bhargava <prarit@redhat.com> Cc: Laurent Vivier <lvivier@redhat.com> Cc: "Christopher S. Hall" <christopher.s.hall@intel.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/20161208204228.688545601@linutronix.deSigned-off-by:
-
Paul Burton authored
commit e85baa88 upstream. The mmc_read_ssr() function results in DMA to the raw_ssr member of struct mmc_card, which is not guaranteed to be cache line aligned & thus might not meet the requirements set out in Documentation/DMA-API.txt: Warnings: Memory coherency operates at a granularity called the cache line width. In order for memory mapped by this API to operate correctly, the mapped region must begin exactly on a cache line boundary and end exactly on one (to prevent two separately mapped regions from sharing a single cache line). Since the cache line size may not be known at compile time, the API will not enforce this requirement. Therefore, it is recommended that driver writers who don't take special care to determine the cache line size at run time only map virtual regions that begin and end on page boundaries (which are guaranteed also to be cache line boundaries). On some systems where DMA is non-coherent this can lead to us losing data that shares cache lines with the raw_ssr array. Fix this by kmalloc'ing a temporary buffer to perform DMA into. kmalloc will ensure the buffer is suitably aligned, allowing the DMA to be performed without any loss of data. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Fixes: 5275a652 ("mmc: sd: Export SD Status via “ssr” device attribute") Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Linus Walleij authored
commit 295070e9 upstream. The regulator has never been properly enabled, it has been dormant all the time. It's strange that MMC was working at all, but it likely worked by the signals going through the levelshifter and reaching the card anyways. Fixes: 3615a34e ("regulator: add STw481x VMMC driver") Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Adrian Hunter authored
commit 61e53bd0 upstream. Clearing the tuning bits should reset the tuning circuit. However there is more to do. Reset the command and data lines for good measure, and then for eMMC ensure the card is not still trying to process a tuning command by sending a stop command. Note the JEDEC eMMC specification says the stop command (CMD12) can be used to stop a tuning command (CMD21) whereas the SD specification is silent on the subject with respect to the SD tuning command (CMD19). Considering that CMD12 is not a valid SDIO command, the stop command is sent only when the tuning command is CMD21 i.e. for eMMC. That addresses cases seen so far which have been on eMMC. Note that this replaces the commit fe5fb2e3 ("mmc: sdhci: Reset cmd and data circuits after tuning failure") which is being reverted for v4.9+. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Tested-by:
Dan O'Donovan <dan@emutex.com> Signed-off-by:
-
