- 06 Jan, 2016 40 commits
-
-
Harry Wentland authored
commit 1d1106b0 upstream. Unused amdgpu_mn functions threw warnings for every file that includes amdgpu.h. It makes sense to inline this amdgpu_mn stubs to avoid the warning. Signed-off-by:
Harry Wentland <harry.wentland@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
Max Filippov authored
commit 5029615e upstream. Build-time fixes: - make lbeg/lend/lcount save/restore conditional on kernel entry; - don't clear lcount in platform_restart functions unconditionally. Run-time fixes: - use correct end of range register in __endla paired with __loopt, not the unused temporary register. This fixes .bss zero-initialization. Update comments in asmmacro.h; - don't clobber a10 in the usercopy that leads to access to unmapped memory. Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
Herbert Xu authored
commit 4afa5f96 upstream. The hash_accept call fails to work on sockets that have not received any data. For some algorithm implementations it may cause crashes. This patch fixes this by ensuring that we only export and import on sockets that have received data. Reported-by:
Harsh Jain <harshjain.prof@gmail.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Tested-by:
Stephan Mueller <smueller@chronox.de> Signed-off-by:
-
Jani Nikula authored
commit 9be64eee upstream. Reported-by:
Keith Webb <khwebb@gmail.com> Suggested-by:
Clint Taylor <Clinton.A.Taylor@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1446209424-28801-1-git-send-email-jani.nikula@intel.comSigned-off-by:
-
Mauricio Faria de Oliveira authored
commit 47796938 upstream. This reverts commit a1989b33. That commit introduced a regression at least for the case of the SG_IO ioctl() running without CAP_SYS_RAWIO capability (e.g., unprivileged users) when there are no active paths: the ioctl() fails with the ENOTTY errno immediately rather than blocking due to queue_if_no_path until a path becomes active, for example. That case happens to be exercised by QEMU KVM guests with 'scsi-block' devices (qemu "-device scsi-block" [1], libvirt "<disk type='block' device='lun'>" [2]) from multipath devices; which leads to SCSI/filesystem errors in such a guest. More general scenarios can hit that regression too. The following demonstration employs a SG_IO ioctl() with a standard SCSI INQUIRY command for this objective (some output & user changes omitted for brevity and comments added for clarity). Reverting that commit restores normal operation (queueing) in failing scenarios; tested on linux-next (next-20151022). 1) Test-case is based on sg_simple0 [3] (just SG_IO; remove SG_GET_VERSION_NUM) $ cat sg_simple0.c ... see [3] ... $ sed '/SG_GET_VERSION_NUM/,/}/d' sg_simple0.c > sgio_inquiry.c $ gcc sgio_inquiry.c -o sgio_inquiry 2) The ioctl() works fine with active paths present. # multipath -l 85ag56 85ag56 (...) dm-19 IBM ,2145 size=60G features='1 queue_if_no_path' hwhandler='0' wp=rw |-+- policy='service-time 0' prio=0 status=active | |- 8:0:11:0 sdz 65:144 active undef running | `- 9:0:9:0 sdbf 67:144 active undef running `-+- policy='service-time 0' prio=0 status=enabled |- 8:0:12:0 sdae 65:224 active undef running `- 9:0:12:0 sdbo 68:32 active undef running $ ./sgio_inquiry /dev/mapper/85ag56 Some of the INQUIRY command's response: IBM 2145 0000 INQUIRY duration=0 millisecs, resid=0 3) The ioctl() fails with ENOTTY errno with _no_ active paths present, for unprivileged users (rather than blocking due to queue_if_no_path). # for path in $(multipath -l 85ag56 | grep -o 'sd[a-z]\+'); \ do multipathd -k"fail path $path"; done # multipath -l 85ag56 85ag56 (...) dm-19 IBM ,2145 size=60G features='1 queue_if_no_path' hwhandler='0' wp=rw |-+- policy='service-time 0' prio=0 status=enabled | |- 8:0:11:0 sdz 65:144 failed undef running | `- 9:0:9:0 sdbf 67:144 failed undef running `-+- policy='service-time 0' prio=0 status=enabled |- 8:0:12:0 sdae 65:224 failed undef running `- 9:0:12:0 sdbo 68:32 failed undef running $ ./sgio_inquiry /dev/mapper/85ag56 sg_simple0: Inquiry SG_IO ioctl error: Inappropriate ioctl for device 4) dmesg shows that scsi_verify_blk_ioctl() failed for SG_IO (0x2285); it returns -ENOIOCTLCMD, later replaced with -ENOTTY in vfs_ioctl(). $ dmesg <...> [] device-mapper: multipath: Failing path 65:144. [] device-mapper: multipath: Failing path 67:144. [] device-mapper: multipath: Failing path 65:224. [] device-mapper: multipath: Failing path 68:32. [] sgio_inquiry: sending ioctl 2285 to a partition! 5) The ioctl() only works if the SYS_CAP_RAWIO capability is present (then queueing happens -- in this example, queue_if_no_path is set); this is due to a conditional check in scsi_verify_blk_ioctl(). # capsh --drop=cap_sys_rawio -- -c './sgio_inquiry /dev/mapper/85ag56' sg_simple0: Inquiry SG_IO ioctl error: Inappropriate ioctl for device # ./sgio_inquiry /dev/mapper/85ag56 & [1] 72830 # cat /proc/72830/stack [<c00000171c0df700>] 0xc00000171c0df700 [<c000000000015934>] __switch_to+0x204/0x350 [<c000000000152d4c>] msleep+0x5c/0x80 [<c00000000077dfb0>] dm_blk_ioctl+0x70/0x170 [<c000000000487c40>] blkdev_ioctl+0x2b0/0x9b0 [<c0000000003128e4>] block_ioctl+0x64/0xd0 [<c0000000002dd3b0>] do_vfs_ioctl+0x490/0x780 [<c0000000002dd774>] SyS_ioctl+0xd4/0xf0 [<c000000000009358>] system_call+0x38/0xd0 6) This is the function call chain exercised in this analysis: SYSCALL_DEFINE3(ioctl, <...>) @ fs/ioctl.c -> do_vfs_ioctl() -> vfs_ioctl() ... error = filp->f_op->unlocked_ioctl(filp, cmd, arg); ... -> dm_blk_ioctl() @ drivers/md/dm.c -> multipath_ioctl() @ drivers/md/dm-mpath.c ... (bdev = NULL, due to no active paths) ... if (!bdev || <...>) { int err = scsi_verify_blk_ioctl(NULL, cmd); if (err) r = err; } ... -> scsi_verify_blk_ioctl() @ block/scsi_ioctl.c ... if (bd && bd == bd->bd_contains) // not taken (bd = NULL) return 0; ... if (capable(CAP_SYS_RAWIO)) // not taken (unprivileged user) return 0; ... printk_ratelimited(KERN_WARNING "%s: sending ioctl %x to a partition!\n" <...>); return -ENOIOCTLCMD; <- ... return r ? : <...> <- ... if (error == -ENOIOCTLCMD) error = -ENOTTY; out: return error; ... Links: [1] http://git.qemu.org/?p=qemu.git;a=commit;h=336a6915bc7089fb20fea4ba99972ad9a97c5f52 [2] https://libvirt.org/formatdomain.html#elementsDisks (see 'disk' -> 'device') [3] http://tldp.org/HOWTO/SCSI-Generic-HOWTO/pexample.html (Revision 1.2, 2002-05-03) Signed-off-by:
Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Brian Norris authored
commit f3c63795 upstream. Commit 073db4a5 ("mtd: fix: avoid race condition when accessing mtd->usecount") fixed a race condition but due to poor ordering of the mutex acquisition, introduced a potential deadlock. The deadlock can occur, for example, when rmmod'ing the m25p80 module, which will delete one or more MTDs, along with any corresponding mtdblock devices. This could potentially race with an acquisition of the block device as follows. -> blktrans_open() -> mutex_lock(&dev->lock); -> mutex_lock(&mtd_table_mutex); -> del_mtd_device() -> mutex_lock(&mtd_table_mutex); -> blktrans_notify_remove() -> del_mtd_blktrans_dev() -> mutex_lock(&dev->lock); This is a classic (potential) ABBA deadlock, which can be fixed by making the A->B ordering consistent everywhere. There was no real purpose to the ordering in the original patch, AFAIR, so this shouldn't be a problem. This ordering was actually already present in del_mtd_blktrans_dev(), for one, where the function tried to ensure that its caller already held mtd_table_mutex before it acquired &dev->lock: if (mutex_trylock(&mtd_table_mutex)) { mutex_unlock(&mtd_table_mutex); BUG(); } So, reverse the ordering of acquisition of &dev->lock and &mtd_table_mutex so we always acquire mtd_table_mutex first. Snippets of the lockdep output follow: # modprobe -r m25p80 [ 53.419251] [ 53.420838] ====================================================== [ 53.427300] [ INFO: possible circular locking dependency detected ] [ 53.433865] 4.3.0-rc6 #96 Not tainted [ 53.437686] ------------------------------------------------------- [ 53.444220] modprobe/372 is trying to acquire lock: [ 53.449320] (&new->lock){+.+...}, at: [<c043fe4c>] del_mtd_blktrans_dev+0x80/0xdc [ 53.457271] [ 53.457271] but task is already holding lock: [ 53.463372] (mtd_table_mutex){+.+.+.}, at: [<c0439994>] del_mtd_device+0x18/0x100 [ 53.471321] [ 53.471321] which lock already depends on the new lock. [ 53.471321] [ 53.479856] [ 53.479856] the existing dependency chain (in reverse order) is: [ 53.487660] -> #1 (mtd_table_mutex){+.+.+.}: [ 53.492331] [<c043fc5c>] blktrans_open+0x34/0x1a4 [ 53.497879] [<c01afce0>] __blkdev_get+0xc4/0x3b0 [ 53.503364] [<c01b0bb8>] blkdev_get+0x108/0x320 [ 53.508743] [<c01713c0>] do_dentry_open+0x218/0x314 [ 53.514496] [<c0180454>] path_openat+0x4c0/0xf9c [ 53.519959] [<c0182044>] do_filp_open+0x5c/0xc0 [ 53.525336] [<c0172758>] do_sys_open+0xfc/0x1cc [ 53.530716] [<c000f740>] ret_fast_syscall+0x0/0x1c [ 53.536375] -> #0 (&new->lock){+.+...}: [ 53.540587] [<c063f124>] mutex_lock_nested+0x38/0x3cc [ 53.546504] [<c043fe4c>] del_mtd_blktrans_dev+0x80/0xdc [ 53.552606] [<c043f164>] blktrans_notify_remove+0x7c/0x84 [ 53.558891] [<c04399f0>] del_mtd_device+0x74/0x100 [ 53.564544] [<c043c670>] del_mtd_partitions+0x80/0xc8 [ 53.570451] [<c0439aa0>] mtd_device_unregister+0x24/0x48 [ 53.576637] [<c046ce6c>] spi_drv_remove+0x1c/0x34 [ 53.582207] [<c03de0f0>] __device_release_driver+0x88/0x114 [ 53.588663] [<c03de19c>] device_release_driver+0x20/0x2c [ 53.594843] [<c03dd9e8>] bus_remove_device+0xd8/0x108 [ 53.600748] [<c03dacc0>] device_del+0x10c/0x210 [ 53.606127] [<c03dadd0>] device_unregister+0xc/0x20 [ 53.611849] [<c046d878>] __unregister+0x10/0x20 [ 53.617211] [<c03da868>] device_for_each_child+0x50/0x7c [ 53.623387] [<c046eae8>] spi_unregister_master+0x58/0x8c [ 53.629578] [<c03e12f0>] release_nodes+0x15c/0x1c8 [ 53.635223] [<c03de0f8>] __device_release_driver+0x90/0x114 [ 53.641689] [<c03de900>] driver_detach+0xb4/0xb8 [ 53.647147] [<c03ddc78>] bus_remove_driver+0x4c/0xa0 [ 53.652970] [<c00cab50>] SyS_delete_module+0x11c/0x1e4 [ 53.658976] [<c000f740>] ret_fast_syscall+0x0/0x1c [ 53.664621] [ 53.664621] other info that might help us debug this: [ 53.664621] [ 53.672979] Possible unsafe locking scenario: [ 53.672979] [ 53.679169] CPU0 CPU1 [ 53.683900] ---- ---- [ 53.688633] lock(mtd_table_mutex); [ 53.692383] lock(&new->lock); [ 53.698306] lock(mtd_table_mutex); [ 53.704658] lock(&new->lock); [ 53.707946] [ 53.707946] *** DEADLOCK *** Fixes: 073db4a5 ("mtd: fix: avoid race condition when accessing mtd->usecount") Reported-by:
Felipe Balbi <balbi@ti.com> Tested-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Mikulas Patocka authored
commit ad5f498f upstream. Commit bfebd1cd ("dm: add full blk-mq support to request-based DM") moves the initialization of the fields backing_dev_info.congested_fn, backing_dev_info.congested_data and queuedata from the function dm_init_md_queue (that is called when the device is created) to dm_init_old_md_queue (that is called after the device type is determined). There is no locking when accessing these variables, thus it is possible for other parts of the kernel to briefly see this data in a transient state (e.g. queue->backing_dev_info.congested_fn initialized and md->queue->backing_dev_info.congested_data uninitialized, resulting in passing an incorrect parameter to the function dm_any_congested). This queue data is left initialized for blk-mq devices even though they that don't use it. Fixes: bfebd1cd ("dm: add full blk-mq support to request-based DM") Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
sumit.saxena@avagotech.com authored
commit 357ae967 upstream. Do not use PAGE_SIZE marco to calculate max_sectors per I/O request. Driver code assumes PAGE_SIZE will be always 4096 which can lead to wrongly calculated value if PAGE_SIZE is not 4096. This issue was reported in Ubuntu Bugzilla Bug #1475166. Signed-off-by:
Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by:
Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by:
Tomas Henzl <thenzl@redhat.com> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
sumit.saxena@avagotech.com authored
commit 0d5b47a7 upstream. Expose non-disk (TAPE drive, CD-ROM) unconditionally. Signed-off-by:
-
Ricardo Ribalda Delgado authored
commit eca37c7c upstream. Some users have reported that in polled mode the driver fails randomly to read the last word of the transfer. The end condition used for the transmissions (in polled and irq mode) has been the TX_EMPTY flag. But Lars-Peter Clausen has identified a delay from the TX_EMPTY to the actual end of the data rx. I believe that this race condition has not been detected until now because of the latency added by the IRQ handler or the PCIe bridge. This bugs affects setups with low latency access to the spi core. This patch replaces the readout logic: For all the words, except the last one, the TX_EMPTY flag is used (and cached). If !TX_EMPY or is the last word. The status register is read and the RX_EMPTY flag is used. The performance is not affected: there is an extra read of the Status Register, but the readout can start as soon as there is a word in the buffer. Reported-by:
Edward Kigwana <ekigwana@scires.com> Initial-fix-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Alex Deucher authored
commit b8b339ea upstream. Reviewed-by:
Jammy Zhou <Jammy.Zhou@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Vineet Gupta authored
commit 9acdc911 upstream. Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Takashi Iwai authored
commit cadd16ea upstream. We've had many reports that some Creative sound cards with CA0132 don't work well. Some reported that it starts working after reloading the module, while some reported it starts working when a 32bit kernel is used. All these facts seem implying that the chip fails to communicate when the buffer is located in 64bit address. This patch addresses these issues by just adding AZX_DCAPS_NO_64BIT flag to the corresponding PCI entries. I casually had a chance to test an SB Recon3D board, and indeed this seems helping. Although this hasn't been tested on all Creative devices, it's safer to assume that this restriction applies to the rest of them, too. So the flag is applied to all Creative entries. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Kailang Yang authored
commit 6ed1131f upstream. This machine had I2S codec for speaker output. It need to refill the I2S codec initial verb after resume back. Signed-off-by:
Kailang Yang <kailang@realtek.com> Reported-and-tested-by:
George Gugulea <gugulea@gmail.com> Signed-off-by:
-
Ludovic Desroches authored
commit a9bed6b1 upstream. In some cases, we could start a new i2c transfer with the RXRDY flag set. It is not a clean state and it leads to print annoying error messages even if there no real issue. The cause is only having garbage data in the Receive Holding Register because of a weird behavior of the RXRDY flag. Reported-by:
Peter Rosin <peda@lysator.liu.se> Signed-off-by:
Ludovic Desroches <ludovic.desroches@atmel.com> Tested-by:
Wolfram Sang <wsa@the-dreams.de> Fixes: 93563a6a ("i2c: at91: fix a race condition when using the DMA controller") Signed-off-by:
-
Chen Yu authored
commit 8c01275e upstream. For an ACPI compatible system, the SCI (ACPI System Control Interrupt) is used to wake the system up from suspend-to-idle. Once the CPU is woken up by the SCI, the interrupt handler will first check if the current IRQ has been configured for system wakeup, so irq_pm_check_wakeup() is invoked to validate the IRQ number. However, during suspend-to-idle, enable_irq_wake() is called for acpi_gbl_FADT.sci_interrupt, although the IRQ number that the SCI handler has been installed for should be passed to it instead. Thus, if acpi_gbl_FADT.sci_interrupt happens to be different from that number, ACPI interrupts will not be able to wake up the system from sleep. Fix this problem by passing the IRQ number returned by acpi_gsi_to_irq() to enable_irq_wake() instead of acpi_gbl_FADT.sci_interrupt. Acked-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
Chen Yu <yu.c.chen@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Chen Yu authored
commit efb1cf7d upstream. When the system is waiting for GPE/fixed event handler to finish, it uses acpi_gbl_FADT.sci_interrupt directly as the IRQ number. However, the remapped IRQ returned by acpi_gsi_to_irq() should be passed to synchronize_hardirq() instead of it. Acked-by:
-
Chen Yu authored
commit 49e4b843 upstream. Currently when the system is trying to uninstall the ACPI interrupt handler, it uses acpi_gbl_FADT.sci_interrupt as the IRQ number. However, the IRQ number that the ACPI interrupt handled is installed for comes from acpi_gsi_to_irq() and that is the number that should be used for the handler removal. Fix this problem by using the mapped IRQ returned from acpi_gsi_to_irq() as appropriate. Acked-by:
-
David Mosberger-Tang authored
commit 06515f83 upstream. The DMA-slave configuration depends on the whether <= 8 or > 8 bits are transferred per word, so we need to call atmel_spi_dma_slave_config() with the correct value. Signed-off-by:
David Mosberger <davidm@egauge.net> Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Cyrille Pitchen authored
commit 6f6ddbb0 upstream. In some cases a NACK interrupt may be pending in the Status Register (SR) as a result of a previous transfer. However at91_do_twi_transfer() did not read the SR to clear pending interruptions before starting a new transfer. Hence a NACK interrupt rose as soon as it was enabled again at the I2C controller level, resulting in a wrong sequence of operations and strange patterns of behaviour on the I2C bus, such as a clock stretch followed by a restart of the transfer. This first issue occurred with both DMA and PIO write transfers. Also when a NACK error was detected during a PIO write transfer, the interrupt handler used to wrongly start a new transfer by writing into the Transmit Holding Register (THR). Then the I2C slave was likely to reply with a second NACK. This second issue is fixed in atmel_twi_interrupt() by handling the TXRDY status bit only if both the TXCOMP and NACK status bits are cleared. Tested with a at24 eeprom on sama5d36ek board running a linux-4.1-at91 kernel image. Adapted to linux-next. Reported-by:
Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by:
-
Antonio Ospite authored
commit 759b26a1 upstream. Since commit 5d0360a4 it's not possible anymore to set auto clusters from auto to manual using VIDIOC_S_CTRL. For example, setting autogain to manual with gspca/ov534 driver and this sequence of commands does not work: v4l2-ctl --set-ctrl=gain_automatic=1 v4l2-ctl --list-ctrls | grep gain_automatic # The following does not work v4l2-ctl --set-ctrl=gain_automatic=0 v4l2-ctl --list-ctrls | grep gain_automatic Changing the value using VIDIOC_S_EXT_CTRLS (like qv4l2 does) works fine. The apparent cause by looking at the changes in 5d0360a4 and comparing with the code path for VIDIOC_S_EXT_CTRLS seems to be that the code in v4l2-ctrls.c::set_ctrl() is not calling user_to_new() anymore after calling update_from_auto_cluster(master). However the root cause of the problem is that calling update_from_auto_cluster(master) overrides also the _master_ control state calling cur_to_new() while it was supposed to only update the volatile controls. Calling user_to_new() after update_from_auto_cluster(master) was just masking the original bug by restoring the correct new value of the master control before making the changes permanent. Fix the original bug by making update_from_auto_cluster() not override the new master control value. Signed-off-by:
Antonio Ospite <ao2@ao2.it> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Tiffany Lin authored
commit 418dae22 upstream. In videobuf2 dma-sg memory types the prepare and finish ops, instead of passing the number of entries in the original scatterlist as the "nents" parameter to dma_sync_sg_for_device() and dma_sync_sg_for_cpu(), the value returned by dma_map_sg() was used. Albeit this has been suggested in comments of some implementations (which have since been corrected), this is wrong. Fixes: d790b7ed ("vb2-dma-sg: move dma_(un)map_sg here") Signed-off-by:
Tiffany Lin <tiffany.lin@mediatek.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Tiffany Lin authored
commit d9a98588 upstream. In videobuf2 dma-contig memory type the prepare and finish ops, instead of passing the number of entries in the original scatterlist as the "nents" parameter to dma_sync_sg_for_device() and dma_sync_sg_for_cpu(), the value returned by dma_map_sg() was used. Albeit this has been suggested in comments of some implementations (which have since been corrected), this is wrong. Fixes: 199d101e ("v4l: vb2-dma-contig: add prepare/finish to dma-contig allocator") Signed-off-by:
-
Andy Shevchenko authored
commit 02f20387 upstream. The following warning occurs when DW SPI is compiled as a module and it's a PCI device. On the removal stage pcibios_free_irq() is called earlier than free_irq() due to the latter is called at managed resources free strage. ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1003 at /home/andy/prj/linux/fs/proc/generic.c:575 remove_proc_entry+0x118/0x150() remove_proc_entry: removing non-empty directory 'irq/38', leaking at least 'dw_spi1' Modules linked in: spi_dw_midpci(-) spi_dw [last unloaded: dw_dmac_core] CPU: 1 PID: 1003 Comm: modprobe Not tainted 4.3.0-rc5-next-20151013+ #32 00000000 00000000 f5535d70 c12dc220 f5535db0 f5535da0 c104e912 c198a6bc f5535dcc 000003eb c198a638 0000023f c11b4098 c11b4098 f54f1ec8 f54f1ea0 f642ba20 f5535db8 c104e96e 00000009 f5535db0 c198a6bc f5535dcc f5535df0 Call Trace: [<c12dc220>] dump_stack+0x41/0x61 [<c104e912>] warn_slowpath_common+0x82/0xb0 [<c11b4098>] ? remove_proc_entry+0x118/0x150 [<c11b4098>] ? remove_proc_entry+0x118/0x150 [<c104e96e>] warn_slowpath_fmt+0x2e/0x30 [<c11b4098>] remove_proc_entry+0x118/0x150 [<c109b96a>] unregister_irq_proc+0xaa/0xc0 [<c109575e>] free_desc+0x1e/0x60 [<c10957d2>] irq_free_descs+0x32/0x70 [<c109b1a0>] irq_domain_free_irqs+0x120/0x150 [<c1039e8c>] mp_unmap_irq+0x5c/0x60 [<c16277b0>] intel_mid_pci_irq_disable+0x20/0x40 [<c1627c7f>] pcibios_free_irq+0xf/0x20 [<c13189f2>] pci_device_remove+0x52/0xb0 [<c13f6367>] __device_release_driver+0x77/0x100 [<c13f6da7>] driver_detach+0x87/0x90 [<c13f5eaa>] bus_remove_driver+0x4a/0xc0 [<c128bf0d>] ? selinux_capable+0xd/0x10 [<c13f7483>] driver_unregister+0x23/0x60 [<c10bad8a>] ? find_module_all+0x5a/0x80 [<c1317413>] pci_unregister_driver+0x13/0x60 [<f80ac654>] dw_spi_driver_exit+0xd/0xf [spi_dw_midpci] [<c10bce9a>] SyS_delete_module+0x17a/0x210 Explicitly call free_irq() at removal stage of the DW SPI driver. Fixes: 04f421e7 (spi: dw: use managed resources) Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Alex Deucher authored
commit a3d5aaa8 upstream. This is the recommended setting from the hw team for newer versions of the firmware. Reviewed-by:
-
Jarkko Sakkinen authored
commit 399235dc upstream. Both for FIFO and CRB interface TCG has decided to use the same HID MSFT0101. They can be differentiated by looking at the start method from TPM2 ACPI table. This patches makes necessary fixes to tpm_tis and tpm_crb modules in order to correctly detect, which module should be used. For MSFT0101 we must use struct acpi_driver because struct pnp_driver has a 7 character limitation. It turned out that the root cause in b371616b was not correct for https://bugzilla.kernel.org/show_bug.cgi?id=98181. v2: * One fixup was missing from v1: is_tpm2_fifo -> is_fifo v3: * Use pnp_driver for existing HIDs and acpi_driver only for MSFT0101 in order ensure backwards compatibility. v4: * Check for FIFO before doing *anything* in crb_acpi_add(). * There was return immediately after acpi_bus_unregister_driver() in cleanup_tis(). This caused pnp_unregister_driver() not to be called. Reported-by:
Michael Saunders <mick.saunders@gmail.com> Reported-by:
Michael Marley <michael@michaelmarley.com> Reported-by:
Jethro Beekman <kernel@jbeekman.nl> Reported-by:
Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by:
Peter Huewe <peterhuewe@gmx.de> Signed-off-by:
-
Jarkko Sakkinen authored
commit 149789ce upstream. The command buffer address must be read with exactly two 32-bit reads. Otherwise, on some HW platforms, it seems that HW will abort the read operation, which causes CPU to fill the read bytes with 1's. Therefore, we cannot rely on memcpy_fromio() but must call ioread32() two times instead. Also, this matches the PC Client Platform TPM Profile specification, which defines command buffer address with two 32-bit fields. Signed-off-by:
-
Hon Ching \\(Vicky\\) Lo authored
commit 60ecd86c upstream. At ibm vtpm initialzation, tpm_ibmvtpm_probe() registers its interrupt handler, ibmvtpm_interrupt, which calls ibmvtpm_crq_process to allocate memory for rtce buffer. The current code uses 'GFP_KERNEL' as the type of kernel memory allocation, which resulted a warning at kernel/lockdep.c. This patch uses 'GFP_ATOMIC' instead so that the allocation is high-priority and does not sleep. Signed-off-by:
Hon Ching(Vicky) Lo <honclo@linux.vnet.ibm.com> Signed-off-by:
-
Andy Leiserson authored
commit 904dad47 upstream. "group" is the group where the backup will be placed, and is initialized to zero in the declaration. This meant that backups for meta_bg descriptors were erroneously written to the backup block group descriptors in groups 1 and (desc_per_block-1). Reproduction information: mke2fs -Fq -t ext4 -b 1024 -O ^resize_inode /tmp/foo.img 16G truncate -s 24G /tmp/foo.img losetup /dev/loop0 /tmp/foo.img mount /dev/loop0 /mnt resize2fs /dev/loop0 umount /dev/loop0 dd if=/dev/zero of=/dev/loop0 bs=1024 count=2 e2fsck -fy /dev/loop0 losetup -d /dev/loop0 Signed-off-by:
Andy Leiserson <andy@leiserson.org> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Jan Kara authored
commit 33d14975 upstream. Unlike comments and expectation of callers journal_clean_one_cp_list() returned 1 not only if it freed the transaction but also if it freed some buffers in the transaction. That could make __jbd2_journal_clean_checkpoint_list() skip processing t_checkpoint_io_list and continue with processing the next transaction. This is mostly a cosmetic issue since the only result is we can sometimes free less memory than we could. But it's still worth fixing. Fix journal_clean_one_cp_list() to return 1 only if the transaction was really freed. Fixes: 50849db3Signed-off-by:
Jan Kara <jack@suse.com> Signed-off-by:
-
Will Deacon authored
commit c0733a2c upstream. The bitmap allocator returns an int, which is one of the standard negative values on failure. Rather than assigning this straight to a u16 (like we do for the ASID and VMID callers), which means that we won't detect failure correctly, use an int for the purposes of error checking. Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
David Woodhouse authored
commit d14053b3 upstream. The VT-d specification says that "Software must enable ATS on endpoint devices behind a Root Port only if the Root Port is reported as supporting ATS transactions." We walk up the tree to find a Root Port, but for integrated devices we don't find one — we get to the host bridge. In that case we *should* allow ATS. Currently we don't, which means that we are incorrectly failing to use ATS for the integrated graphics. Fix that. We should never break out of this loop "naturally" with bus==NULL, since we'll always find bridge==NULL in that case (and now return 1). So remove the check for (!bridge) after the loop, since it can never happen. If it did, it would be worthy of a BUG_ON(!bridge). But since it'll oops anyway in that case, that'll do just as well. Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> Signed-off-by:
-
Andrey Ryabinin authored
commit 0ad95472 upstream. Commit cb7323ff ("lockd: create and use per-net NSM RPC clients on MON/UNMON requests") introduced per-net NSM RPC clients. Unfortunately this doesn't make any sense without per-net nsm_handle. E.g. the following scenario could happen Two hosts (X and Y) in different namespaces (A and B) share the same nsm struct. 1. nsm_monitor(host_X) called => NSM rpc client created, nsm->sm_monitored bit set. 2. nsm_mointor(host-Y) called => nsm->sm_monitored already set, we just exit. Thus in namespace B ln->nsm_clnt == NULL. 3. host X destroyed => nsm->sm_count decremented to 1 4. host Y destroyed => nsm_unmonitor() => nsm_mon_unmon() => NULL-ptr dereference of *ln->nsm_clnt So this could be fixed by making per-net nsm_handles list, instead of global. Thus different net namespaces will not be able share the same nsm_handle. Signed-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Vignesh R authored
commit bc27a539 upstream. Writing invalid command to QSPI_SPI_CMD_REG will terminate current transfer and de-assert the chip select. This has to be done before calling spi_finalize_current_message(). Because spi_finalize_current_message() will mark the end of current message transfer and schedule the next transfer. If the chipselect is not de-asserted before calling spi_finalize_current_message() then the next transfer will overlap with the previous transfer leading to data corruption. __spi_pump_message() can be called either from kthread worker context or directly from the calling process's context. It is possible that these two calls can race against each other. But race is serialized by checking whether master->cur_msg == NULL (pointer to msg being handled by transfer_one() at present). The master->cur_msg is set to NULL when spi_finalize_current_message() is called on that message, which means calling spi_finalize_current_message() allows __spi_sync() to pump next message in calling process context. Now if spi-ti-qspi calls spi_finalize_current_message() before we terminate transfer at hardware side, if __spi_pump_message() is called from process context then the successive transactions can overlap. Fix this by moving writing invalid command to QSPI_SPI_CMD_REG to before calling spi_finalize_current_message() call. Signed-off-by:
Vignesh R <vigneshr@ti.com> Signed-off-by:
-
Jaegeuk Kim authored
commit 569cf187 upstream. We got dentry pages from high_mem, and its address space directly goes into the decryption path via f2fs_fname_disk_to_usr. But, sg_init_one assumes the address is not from high_mem, so we can get this panic since it doesn't call kmap_high but kunmap_high is triggered at the end. kernel BUG at ../../../../../../kernel/mm/highmem.c:290! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM ... (kunmap_high+0xb0/0xb8) from [<c0114534>] (__kunmap_atomic+0xa0/0xa4) (__kunmap_atomic+0xa0/0xa4) from [<c035f028>] (blkcipher_walk_done+0x128/0x1ec) (blkcipher_walk_done+0x128/0x1ec) from [<c0366c24>] (crypto_cbc_decrypt+0xc0/0x170) (crypto_cbc_decrypt+0xc0/0x170) from [<c0367148>] (crypto_cts_decrypt+0xc0/0x114) (crypto_cts_decrypt+0xc0/0x114) from [<c035ea98>] (async_decrypt+0x40/0x48) (async_decrypt+0x40/0x48) from [<c032ca34>] (f2fs_fname_disk_to_usr+0x124/0x304) (f2fs_fname_disk_to_usr+0x124/0x304) from [<c03056fc>] (f2fs_fill_dentries+0xac/0x188) (f2fs_fill_dentries+0xac/0x188) from [<c03059c8>] (f2fs_readdir+0x1f0/0x300) (f2fs_readdir+0x1f0/0x300) from [<c0218054>] (vfs_readdir+0x90/0xb4) (vfs_readdir+0x90/0xb4) from [<c0218418>] (SyS_getdents64+0x64/0xcc) (SyS_getdents64+0x64/0xcc) from [<c0105ba0>] (ret_fast_syscall+0x0/0x30) Reviewed-by:
Chao Yu <chao2.yu@samsung.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Dmitry Kasatkin authored
commit 72e1eed8 upstream. If IMA_LOAD_X509 is enabled, either directly or indirectly via IMA_APPRAISE_SIGNED_INIT, certificates are loaded onto the IMA trusted keyring by the kernel via key_create_or_update(). When the KEY_ALLOC_TRUSTED flag is provided, certificates are loaded without first verifying the certificate is properly signed by a trusted key on the system keyring. This patch removes the KEY_ALLOC_TRUSTED flag. Signed-off-by:
Dmitry Kasatkin <dmitry.kasatkin@huawei.com> Signed-off-by:
Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by:
-
Chris Wilson authored
commit e4b946bf upstream. Michał Winiarski found a really evil way to trigger a struct_mutex deadlock with userptr. He found that if he allocated a userptr bo and then GTT mmaped another bo, or even itself, at the same address as the userptr using MAP_FIXED, he could then cause a deadlock any time we then had to invalidate the GTT mmappings (so at will). Tvrtko then found by repeatedly allocating GTT mmappings he could alias with an old userptr mmap and also trigger the deadlock. To counter act the deadlock, we make the observation that we only need to take the struct_mutex if the object has any pages to revoke, and that before userspace can alias with the userptr address space, it must have invalidated the userptr->pages. Thus if we can check for those pages outside of the struct_mutex, we can avoid the deadlock. To do so we introduce a separate flag for userptr objects that we can inspect from the mmu-notifier underneath its spinlock. The patch makes one eye-catching change. That is the removal serial=0 after detecting a to-be-freed object inside the invalidate walker. I felt setting serial=0 was a questionable pessimisation: it denies us the chance to reuse the current iterator for the next loop (before it is freed) and being explicit makes the reader question the validity of the locking (since the object-free race could occur elsewhere). The serialisation of the iterator is through the spinlock, if the object is freed before the next loop then the notifier.serial will be incremented and we start the walk from the beginning as we detect the invalid cache. To try and tame the error paths and interactions with the userptr->active flag, we have to do a fair amount of rearranging of get_pages_userptr(). v2: Grammar fixes v3: Reorder set-active so that it is only set when obj->pages is set (and so needs cancellation). Only the order of setting obj->pages and the active-flag is crucial. Calling gup after invalidate-range begin means the userptr sees the new set of backing storage (and so will not need to invalidate its new pages), but we have to be careful not to set the active-flag prior to successfully establishing obj->pages. v4: Take the active->flag early so we know in the mmu-notifier when we have to cancel a pending gup-worker. v5: Rearrange the error path so that is not so convoluted v6: Set pinned to 0 when negative before calling release_pages() Reported-by:
Michał Winiarski <michal.winiarski@intel.com> Testcase: igt/gem_userptr_blits/map-fixed* Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Chris Wilson authored
commit 68d6c840 upstream. The userptr worker allows for a slight race condition where upon there may two or more threads calling get_user_pages for the same object. When we have the array of pages, then we serialise the update of the object. However, the worker should only overwrite the obj->userptr.work pointer if and only if it is the active one. Currently we clear it for a secondary worker with the effect that we may rarely force a second lookup. v2: Rebase and rename a variable to avoid 80cols v3: Mention v2 Signed-off-by:
-
Richard Weinberger authored
commit 1cb8f977 upstream. If fastmap requests a free PEB for a pool and UBI is busy with erasing PEBs we need to offer a function to wait for one. We can reuse produce_free_peb() from the non-fastmap WL code but with different locking semantics. Reported-and-tested-by:
Jörg Krause <joerg.krause@embedded.rocks> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Benoit Parrot authored
commit a8077734 upstream. When trying to use v4l2_ctrl_g_ctrl_int64() to retrieve a V4L2_CTRL_TYPE_INTEGER64 type value the internal helper function get_ctrl() would prematurely exit because for this control type the 'is_int' flag is not set. This would result in v4l2_ctrl_g_ctrl_int64 always returning 0. Also v4l2_ctrl_g_ctrl_int64() is reading and returning the 32bit value member instead of the 64bit version, so fixing that as well. This patch extends the condition check to allow the V4L2_CTRL_TYPE_INTEGER64 type to continue processing instead of exiting. Signed-off-by:
Benoit Parrot <bparrot@ti.com> Signed-off-by:
-
