- 23 Oct, 2011 23 commits
-
-
Dan Carpenter authored
There were no range checks in the original code so the user could write past the end of the array. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Dan Carpenter authored
The indents didn't line up at all in the original code. I also fixed a bunch of other white issues as I went along. I changed the comment style and removed some commented out code. Signed-off-by:
-
Dan Carpenter authored
We need to verify that we're not writing past the end of the array. Signed-off-by:
-
Dan Carpenter authored
The indents on this file didn't line up so it was hard to work with. I changed other white space issues as I came across them. I also deleted or changed some couple comments and the comment style. Signed-off-by:
-
Mark Einon authored
Some defines are no longer referenced in the code, so removed them. Signed-off-by:
Mark Einon <mark.einon@gmail.com> Signed-off-by:
-
Mark Einon authored
Replaced pci map/unmap and set_mask calls with their dma equivalents. Also updated comments to reflect this. Signed-off-by:
-
Mark Einon authored
* Currently the tx queue is only stopped when the current packet fails. Check if the next packet will fail, and stop the queue if so. * Removed associated item from TODO list in the README. * Also minor fixup as adapter was being declared as null and immediately set to a value. Signed-off-by:
-
Mark Einon authored
Used the convenience macros DEFINE_PCI_DEVICE_TABLE and PCI_VDEVICE to tidy up the device table definition. Also remove the corresponding TODO item from the README. Signed-off-by:
-
Mark Einon authored
Previous update was to replace pci_alloc with dma_alloc calls. I missed replacing the corresponding pci_free_ calls with the dma versions. Now done. Thanks to Denis Kirjanov <kirjanov@gmail.com> for pointing this out. Signed-off-by:
-
Mark Einon authored
Use dma_allocs instead of pci_allocs, so we can use GFP_KERNEL allocations. Also removed this item from the TODO list Signed-off-by:
-
Mark Einon authored
* Following on from making rx_ring.fbr use a common structure - reversed the fbr[] array indicies so that index 1 = FBR0 and index 0 = FBR1, which allows USE_FBR0 define to work. * Also fixed up minor issues where indexes into the array were out of bounds in some places. * Removed rx_ring.fbr common stuct TODO item from README Signed-off-by:
-
Mark Einon authored
Sharing a common structure by moving common structure items into fbr_lookup. TODO - Currently will not work if USE_FBR0 = 0 as FBR1 uses fbr[1] which is removed in this case Signed-off-by:
-
Mark Einon authored
Two helper functions for adding 10bit/12bit umbers with wrapping are defined in the header. Moved them to the driver .c file. Signed-off-by:
-
Mark Einon authored
Driver now resides in a single file with a separate header with registers, updated the README TODO list. Signed-off-by:
-
Mark Einon authored
Move et1310_tx.h contents into et131x.c and delete et1310_tx.h Signed-off-by:
-
Mark Einon authored
Move et1310_rx.h contents into et131x.c and delete et1310_rx.h Signed-off-by:
-
Mark Einon authored
Move et131x_defs.h contents into et131x.c and delete et131x_defs.h Signed-off-by:
-
Mark Einon authored
Move et131x_adapter.h contents into et131x.c and delete et131x_adapter.h Signed-off-by:
-
Mark Einon authored
Move et1310_phy.h register defines into et131x.h and delete et1310_phy.h Signed-off-by:
-
Mark Einon authored
Move et1310_address_map.h register defines into et131x.h and delete et1310_address_map.h Signed-off-by:
-
Mark Einon authored
Header file should only have register defines, moved non-register defines to et131x.c Signed-off-by:
-
Mark Einon authored
The function declarations in et131x.h are no longer used now all functions are in one file. Removed declarations from et131x.h and added any required forward declarations to et131x.c. Signed-off-by:
-
Mark Einon authored
Created one big .c file for the driver, moving the contents of all driver .c files into it. Signed-off-by:
-
- 19 Oct, 2011 11 commits
-
-
Lars-Peter Clausen authored
Currently it is possible to write negative values to the ad5686's raw attribute. This will cause undefined behaviour, so reject negative values. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Acked-by:
Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by:
-
Lars-Peter Clausen authored
Scale is currently reported in volts instead of millivolts. This patch fixes it. Signed-off-by:
-
Lars-Peter Clausen authored
Add the missing "voltage" chan_type to the powerdown attributes. Signed-off-by:
-
Lars-Peter Clausen authored
The ad5791 currently assumes that the negative and positive supply have the same absolute value, which is not necessarily true. This patch introduces a offset attribute which will contain the negative supply voltage scaled according to the iio spec. The raw attribute now accepts values in the range of 0 to max instead of -max/2 to max/2. While we are at it also fix the vref span calculation. Since both positive and negative reference voltages are specificed as absolute values we need to add them and not subtract them to get the reference voltage span. Signed-off-by:
-
Lars-Peter Clausen authored
Commit c5b99396 ("staging:iio:dac:ad5791 chan spec conversion.") introduced a small bug, using storagebits instead of realbits throughout the driver, which causes the driver to work incorrectly. This patch fixes it. Signed-off-by:
-
Michael Hennerich authored
Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Acked-by:
-
Michael Hennerich authored
No functional changes. Fix Kconfig description. Signed-off-by:
-
Michael Hennerich authored
Signed-off-by:
-
Lars-Peter Clausen authored
This patch adds support for the Analog Devices AD6064, AD6064-1, AD6044, AD6024 quad channel digital-to-analog converter devices. Signed-off-by:
-
Vladimir Zapolskiy authored
According to OMAP3 TRM access to MMU registers shall be strictly 32-bit aligned. Signed-off-by:
Vladimir Zapolskiy <vz@mleia.com> Acked-by:
Omar Ramirez Luna <omar.ramirez@ti.com> Signed-off-by:
-
Dan Carpenter authored
The original code left it up to the user to decide how much data to copy, but that doesn't work with a fixed size array. Signed-off-by:
-
- 18 Oct, 2011 3 commits
-
-
Greg Kroah-Hartman authored
There's a lot of unused and unneeded things in this makefile, so delete it all. Reported-by:
Grant Likely <grant.likely@secretlab.ca> Signed-off-by:
-
Greg Kroah-Hartman authored
There's a lot of unused and unneeded things in this makefile, so delete it all. Reported-by:
-
Greg Kroah-Hartman authored
There's a lot of unused and unneeded things in this makefile, so delete it all. Reported-by:
-
- 17 Oct, 2011 3 commits
-
-
Oren Weil authored
1) We move the AMT Watchdog to use the kernel watchdog core. the new code is still part of the MEI driver. we didn't find any good reason to extract the the MEI driver watchdog code from the MEI Driver to a new module. 2) Since the watchdog remains in the mei driver, exposing in-kernel API just for AMTHI is unnecessary. MEI new Watchdog Core Interface Patches set: https://lkml.org/lkml/2011/9/7/26 3) Code cleanup (init and probe, bug_on usage, headers and etc) was submitted in previous patches. Patches: https://lkml.org/lkml/2011/9/21/231 https://lkml.org/lkml/2011/6/15/358 https://lkml.org/lkml/2011/7/7/177 https://lkml.org/lkml/2011/9/7/38 https://lkml.org/lkml/2011/9/7/37 https://lkml.org/lkml/2011/9/7/28 4) mei.txt was updated with additional information. Patch: https://lkml.org/lkml/2011/10/16/52Acked-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
Oren Weil <oren.jer.weil@intel.com> Signed-off-by:
-
Manohar Vanga authored
Signed-off-by:
Manohar Vanga <manohar.vanga@cern.ch> Cc: Martyn Welch <martyn.welch@ge.com> Reviewed-by:
Emilio G. Cota <cota@braap.org> Signed-off-by:
-
Manohar Vanga authored
Previously, the device-driver matching mechanism depended on the vme_device_id structure due to the need for a bind table per driver. This method of matching is no longer used so this patch merges the fields of struct vme_device_id into struct vme_dev. Since this also renders the slot field meaningless, it has also been removed in this patch. Signed-off-by:
-
