- 28 Oct, 2016 40 commits
-
-
Gavin Shan authored
commit 5adaf862 upstream. This fixes the warnings reported from sparse: pci.c:312:33: warning: restricted __be64 degrades to integer pci.c:313:33: warning: restricted __be64 degrades to integer Fixes: cee72d5b ("powerpc/powernv: Display diag data on p7ioc EEH errors") Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gavin Shan authored
commit a7032132 upstream. The hub diag-data type is filled with big-endian data by OPAL call opal_pci_get_hub_diag_data(). We need convert it to CPU-endian value before using it. The issue is reported by sparse as pointed by Michael Ellerman: eeh-powernv.c:1309:21: warning: restricted __be16 degrades to integer This converts hub diag-data type to CPU-endian before using it in pnv_eeh_get_and_dump_hub_diag(). Fixes: 2a485ad7 ("powerpc/powernv: Drop PHB operation next_error()") Suggested-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by:
Russell Currey <ruscur@russell.cc> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Russell Currey authored
commit 04fec21c upstream. eeh_pe_bus_get() can return NULL if a PCI bus isn't found for a given PE. Some callers don't check this, and can cause a null pointer dereference under certain circumstances. Fix this by checking NULL everywhere eeh_pe_bus_get() is called. Fixes: 8a6b1bc7 ("powerpc/eeh: EEH core to handle special event") Signed-off-by:
Russell Currey <ruscur@russell.cc> Reviewed-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gavin Shan authored
commit d63e51b3 upstream. The PE number (@frozen_pe_no), filled by opal_pci_next_error() is in big-endian format. It should be converted to CPU-endian before it is passed to opal_pci_eeh_freeze_clear() when clearing the frozen state if the PE is invalid one. As Michael Ellerman pointed out, the issue is also detected by sparse: eeh-powernv.c:1541:41: warning: incorrect type in argument 2 (different base types) This passes CPU-endian PE number to opal_pci_eeh_freeze_clear() and it should be part of commit <0f36db77> ("powerpc/eeh: Fix wrong printed PE number"), which was merged to 4.3 kernel. Fixes: 71b540ad ("powerpc/powernv: Don't escalate non-existing frozen PE") Suggested-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by:
Russell Currey <ruscur@russell.cc> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Anton Blanchard authored
commit 5045ea37 upstream. __kernel_get_syscall_map() and __kernel_clock_getres() use cmpli to check if the passed in pointer is non zero. cmpli maps to a 32 bit compare on binutils, so we ignore the top 32 bits. A simple test case can be created by passing in a bogus pointer with the bottom 32 bits clear. Using a clk_id that is handled by the VDSO, then one that is handled by the kernel shows the problem: printf("%d\n", clock_getres(CLOCK_REALTIME, (void *)0x100000000)); printf("%d\n", clock_getres(CLOCK_BOOTTIME, (void *)0x100000000)); And we get: 0 -1 The bigger issue is if we pass a valid pointer with the bottom 32 bits clear, in this case we will return success but won't write any data to the pointer. I stumbled across this issue because the LLVM integrated assembler doesn't accept cmpli with 3 arguments. Fix this by converting them to cmpldi. Fixes: a7f290da ("[PATCH] powerpc: Merge vdso's and add vdso support to 32 bits kernel") Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael Ellerman authored
commit b42d9023 upstream. In commit 31cdd0c3 ("powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs") I added two uses of the "ld" instruction in spr_access.S. "ld" is a 64-bit instruction, so shouldn't be used on 32-bit CPUs. Replace it with PPC_LL which is a macro that gives us either "ld" or "lwz" depending on whether we're 64 or 32-bit. Fixes: 31cdd0c3 ("powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs") Reported-by:
John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rabin Vincent authored
commit f659b100 upstream. As the documentation for kthread_stop() says, "if threadfn() may call do_exit() itself, the caller must ensure task_struct can't go away". dm-crypt does not ensure this and therefore crashes when crypt_dtr() calls kthread_stop(). The crash is trivially reproducible by adding a delay before the call to kthread_stop() and just opening and closing a dm-crypt device. general protection fault: 0000 [#1] PREEMPT SMP CPU: 0 PID: 533 Comm: cryptsetup Not tainted 4.8.0-rc7+ #7 task: ffff88003bd0df40 task.stack: ffff8800375b4000 RIP: 0010: kthread_stop+0x52/0x300 Call Trace: crypt_dtr+0x77/0x120 dm_table_destroy+0x6f/0x120 __dm_destroy+0x130/0x250 dm_destroy+0x13/0x20 dev_remove+0xe6/0x120 ? dev_suspend+0x250/0x250 ctl_ioctl+0x1fc/0x530 ? __lock_acquire+0x24f/0x1b10 dm_ctl_ioctl+0x13/0x20 do_vfs_ioctl+0x91/0x6a0 ? ____fput+0xe/0x10 ? entry_SYSCALL_64_fastpath+0x5/0xbd ? trace_hardirqs_on_caller+0x151/0x1e0 SyS_ioctl+0x41/0x70 entry_SYSCALL_64_fastpath+0x1f/0xbd This problem was introduced by bcbd94ff ("dm crypt: fix a possible hang due to race condition on exit"). Looking at the description of that patch (excerpted below), it seems like the problem it addresses can be solved by just using set_current_state instead of __set_current_state, since we obviously need the memory barrier. | dm crypt: fix a possible hang due to race condition on exit | | A kernel thread executes __set_current_state(TASK_INTERRUPTIBLE), | __add_wait_queue, spin_unlock_irq and then tests kthread_should_stop(). | It is possible that the processor reorders memory accesses so that | kthread_should_stop() is executed before __set_current_state(). If | such reordering happens, there is a possible race on thread | termination: [...] So this patch just reverts the aforementioned patch and changes the __set_current_state(TASK_INTERRUPTIBLE) to set_current_state(...). This fixes the crash and should also fix the potential hang. Fixes: bcbd94ff ("dm crypt: fix a possible hang due to race condition on exit") Cc: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Rabin Vincent <rabinv@axis.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mike Snitzer authored
commit f10e06b7 upstream. If pg_init_retries is set and a request is queued against a multipath device with all underlying block device request_queues in the "dying" state then an infinite loop is triggered because activate_path() never succeeds and hence never calls pg_init_done(). This change avoids that device removal triggers an infinite loop by failing the activate_path() which causes the "dying" path to be failed. Reported-by:
Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mike Snitzer authored
commit 9dbeaeab upstream. Every call of queue_flag_clear_unlocked() after block device initialization has finished is wrong if blk_cleanup_queue() can be called concurrently. Convert queue_flag_clear_unlocked() into queue_flag_clear() and protect it by the block layer queue lock. Also, factor out dm_mq_start_queue(). Reported-by:
Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Minfei Huang authored
commit 8dc23658 upstream. dm_resume() will return success (0) rather than -EINVAL if !dm_suspended_md() upon retry within dm_resume(). Reset the error code at the start of dm_resume()'s retry loop. Also, remove a useless assignment at the end of dm_resume(). Fixes: ffcc3936 ("dm: enhance internal suspend and resume interface") Signed-off-by:
Minfei Huang <mnghuan@gmail.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bart Van Assche authored
commit 3b785fbc upstream. This avoids that new requests are queued while __dm_destroy() is in progress. Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Adrian Hunter authored
commit 3bccbe20 upstream. The MTC packet provides a 8-bit slice of CTC which is related to TSC by the TMA packet, however the TMA packet only provides the lower 16 bits of CTC. If mtc_shift > 8 then some of the MTC bits are not in the CTC provided by the TMA packet. Fix-up the last_mtc calculated from the TMA packet by copying the missing bits from the current MTC assuming the least difference between the two, and that the current MTC comes after last_mtc. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1475062896-22274-2-git-send-email-adrian.hunter@intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Adrian Hunter authored
commit 51ee6481 upstream. In cycle-accurate mode, timestamps can be calculated from CYC packets. The decoder also estimates timestamps based on the number of instructions since the last timestamp. For that to work in cycle-accurate mode, the instruction count needs to be reset to zero when a timestamp is calculated from a CYC packet, but that wasn't happening, so fix it. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1475062896-22274-1-git-send-email-adrian.hunter@intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Adrian Hunter authored
commit 810c398b upstream. Fix occasional decoder errors decoding trace data collected in snapshot mode. Snapshot mode can take successive snapshots of trace which might overlap. The decoder checks whether there is an overlap but only looks at the current and previous buffer. However buffers that do not contain synchronization (i.e. PSB) packets cannot be decoded or used for overlap checking. That means the decoder actually needs to check overlaps between the current buffer and the previous buffer that contained usable data. Make that change. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Link: http://lkml.kernel.org/r/1474641528-18776-10-git-send-email-adrian.hunter@intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andrew Bresticker authored
commit d771fdf9 upstream. The ramoops buffer may be mapped as either I/O memory or uncached memory. On ARM64, this results in a device-type (strongly-ordered) mapping. Since unnaligned accesses to device-type memory will generate an alignment fault (regardless of whether or not strict alignment checking is enabled), it is not safe to use memcpy(). memcpy_fromio() is guaranteed to only use aligned accesses, so use that instead. Signed-off-by:
Andrew Bresticker <abrestic@chromium.org> Signed-off-by:
Enric Balletbo Serra <enric.balletbo@collabora.com> Reviewed-by:
Puneet Kumar <puneetster@chromium.org> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Furquan Shaikh authored
commit 7e75678d upstream. persistent_ram_update uses vmap / iomap based on whether the buffer is in memory region or reserved region. However, both map it as non-cacheable memory. For armv8 specifically, non-cacheable mapping requests use a memory type that has to be accessed aligned to the request size. memcpy() doesn't guarantee that. Signed-off-by:
Furquan Shaikh <furquan@google.com> Signed-off-by:
Enric Balletbo Serra <enric.balletbo@collabora.com> Reviewed-by:
Aaron Durbin <adurbin@chromium.org> Reviewed-by:
Olof Johansson <olofj@chromium.org> Tested-by:
Furquan Shaikh <furquan@chromium.org> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sebastian Andrzej Siewior authored
commit d5a9bf0b upstream. I have here a FPGA behind PCIe which exports SRAM which I use for pstore. Now it seems that the FPGA no longer supports cmpxchg based updates and writes back 0xff…ff and returns the same. This leads to crash during crash rendering pstore useless. Since I doubt that there is much benefit from using cmpxchg() here, I am dropping this atomic access and use the spinlock based version. Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Rabin Vincent <rabinv@axis.com> Tested-by:
Rabin Vincent <rabinv@axis.com> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> [kees: remove "_locked" suffix since it's the only option now] Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sebastian Andrzej Siewior authored
commit 4407de74 upstream. A basic rmmod ramoops segfaults. Let's see why. Since commit 34f0ec82 ("pstore: Correct the max_dump_cnt clearing of ramoops") sets ->max_dump_cnt to zero before looping over ->przs but we didn't use it before that either. And since commit ee1d2674 ("pstore: add pstore unregister") we free that memory on rmmod. But even then, we looped until a NULL pointer or ERR. I don't see where it is ensured that the last member is NULL. Let's try this instead: simply error recovery and free. Clean up in error case where resources were allocated. And then, in the free path, rely on ->max_dump_cnt in the free path. Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Acked-by:
Namhyung Kim <namhyung@kernel.org> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Helge Deller authored
commit 65bf34f5 upstream. Increase the initial kernel default page mapping size for 64-bit kernels to 64 MB and for 32-bit kernels to 32 MB. Due to the additional support of ftrace, tracepoint and huge pages the kernel size can exceed the sizes we used up to now. Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Helge Deller authored
commit f8850abb upstream. Architecturally we need to keep __gp below 0x1000000. But because of ftrace and tracepoint support, the RO_DATA_SECTION now gets much bigger than it was before. By moving the linkage tables before RO_DATA_SECTION we can avoid that __gp gets positioned at a too high address. Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Helge Deller authored
commit 92420bd0 upstream. The config option HAVE_UNSTABLE_SCHED_CLOCK is set automatically when compiling for SMP. There is no need to clear the stable-clock flag via clear_sched_clock_stable() when starting secondary CPUs, and even worse, clearing it triggers wrong self-detected CPU stall warnings on 64bit Mako machines. Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Helge Deller authored
commit 690d097c upstream. Increase the initial kernel default page mapping size for SMP kernels to 32MB and add a runtime check which panics early if the kernel is bigger than the initial mapping size. This fixes boot crashes of 32bit SMP kernels. Due to the introduction of huge page support in kernel 4.4 and it's required initial kernel layout in memory, a 32bit SMP kernel usually got bigger (in layout, not size) than 16MB. Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sergey Senozhatsky authored
commit c6fe46a7 upstream. 'best' is always less or equals to 'pos', so `best - pos' returns a negative value which is then getting casted to `unsigned int' and passed to __cpufreq_driver_target()->acpi_cpufreq_target() for policy->freq_table selection. This results in BUG: unable to handle kernel paging request at ffff881019b469f8 IP: [<ffffffffa00356c1>] acpi_cpufreq_target+0x4f/0x190 [acpi_cpufreq] PGD 267f067 PUD 0 Oops: 0000 [#1] PREEMPT SMP CPU: 6 PID: 70 Comm: kworker/6:1 Not tainted 4.9.0-rc1-next-20161017-dbg-dirty Workqueue: events dbs_work_handler task: ffff88041b808000 task.stack: ffff88041b810000 RIP: 0010:[<ffffffffa00356c1>] [<ffffffffa00356c1>] acpi_cpufreq_target+0x4f/0x190 [acpi_cpufreq] RSP: 0018:ffff88041b813c60 EFLAGS: 00010282 RAX: ffff880419b46a00 RBX: ffff88041b848400 RCX: ffff880419b20f80 RDX: 00000000001dff38 RSI: 00000000ffffffff RDI: ffff88041b848400 RBP: ffff88041b813cb0 R08: 0000000000000006 R09: 0000000000000040 R10: ffffffff8207f9e0 R11: ffffffff8173595b R12: 0000000000000000 R13: ffff88041f1dff38 R14: 0000000000262900 R15: 0000000bfffffff4 FS: 0000000000000000(0000) GS:ffff88041f000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff881019b469f8 CR3: 000000041a2d3000 CR4: 00000000001406e0 Stack: ffff88041b813cb0 ffffffff813347f9 ffff88041b813ca0 ffffffff81334663 ffff88041f1d4bc0 ffff88041b848400 0000000000000000 0000000000000000 0000000000262900 0000000000000000 ffff88041b813d00 ffffffff813355dc Call Trace: [<ffffffff813347f9>] ? cpufreq_freq_transition_begin+0xf1/0xfc [<ffffffff81334663>] ? get_cpu_idle_time+0x97/0xa6 [<ffffffff813355dc>] __cpufreq_driver_target+0x3b6/0x44e [<ffffffff81336ca3>] cs_dbs_timer+0x11a/0x135 [<ffffffff81336fda>] dbs_work_handler+0x39/0x62 [<ffffffff81057823>] process_one_work+0x280/0x4a5 [<ffffffff81058719>] worker_thread+0x24f/0x397 [<ffffffff810584ca>] ? rescuer_thread+0x30b/0x30b [<ffffffff81418380>] ? nl80211_get_key+0x29/0x36a [<ffffffff8105d2b7>] kthread+0xfc/0x104 [<ffffffff8107ceea>] ? put_lock_stats.isra.9+0xe/0x20 [<ffffffff8105d1bb>] ? kthread_create_on_node+0x3f/0x3f [<ffffffff814b2092>] ret_from_fork+0x22/0x30 Code: 56 4d 6b ff 0c 41 55 41 54 53 48 83 ec 28 48 8b 15 ad 1e 00 00 44 8b 41 08 48 8b 87 c8 00 00 00 49 89 d5 4e 03 2c c5 80 b2 78 81 <46> 8b 74 38 04 45 3b 75 00 75 11 31 c0 83 39 00 0f 84 1c 01 00 RIP [<ffffffffa00356c1>] acpi_cpufreq_target+0x4f/0x190 [acpi_cpufreq] RSP <ffff88041b813c60> CR2: ffff881019b469f8 ---[ end trace 16d9fc7a17897d37 ]--- [ rjw: In some cases this bug may also cause incorrect frequencies to be selected by cpufreq governors. ] Fixes: 899bb664 (cpufreq: skip invalid entries when searching the frequency) Link: http://marc.info/?l=linux-kernel&m=147672030714331&w=2Reported-and-tested-by:
Sedat Dilek <sedat.dilek@gmail.com> Reported-and-tested-by:
Jörg Otte <jrg.otte@gmail.com> Signed-off-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Srinivas Pandruvada authored
commit f9f4872d upstream. This is a requirement that MSR MSR_PM_ENABLE must be set to 0x01 before reading MSR_HWP_CAPABILITIES on a given CPU. If cpufreq init() is scheduled on a CPU which is not same as policy->cpu or migrates to a different CPU before calling msr read for MSR_HWP_CAPABILITIES, it is possible that MSR_PM_ENABLE was not to set to 0x01 on that CPU. This will cause GP fault. So like other places in this path rdmsrl_on_cpu should be used instead of rdmsrl. Moreover the scope of MSR_HWP_CAPABILITIES is on per thread basis, so it should be read from the same CPU, for which MSR MSR_HWP_REQUEST is getting set. dmesg dump or warning: [ 22.014488] WARNING: CPU: 139 PID: 1 at arch/x86/mm/extable.c:50 ex_handler_rdmsr_unsafe+0x68/0x70 [ 22.014492] unchecked MSR access error: RDMSR from 0x771 [ 22.014493] Modules linked in: [ 22.014507] CPU: 139 PID: 1 Comm: swapper/0 Not tainted 4.7.5+ #1 ... ... [ 22.014516] Call Trace: [ 22.014542] [<ffffffff813d7dd1>] dump_stack+0x63/0x82 [ 22.014558] [<ffffffff8107bc8b>] __warn+0xcb/0xf0 [ 22.014561] [<ffffffff8107bcff>] warn_slowpath_fmt+0x4f/0x60 [ 22.014563] [<ffffffff810676f8>] ex_handler_rdmsr_unsafe+0x68/0x70 [ 22.014564] [<ffffffff810677d9>] fixup_exception+0x39/0x50 [ 22.014604] [<ffffffff8102e400>] do_general_protection+0x80/0x150 [ 22.014610] [<ffffffff817f9ec8>] general_protection+0x28/0x30 [ 22.014635] [<ffffffff81687940>] ? get_target_pstate_use_performance+0xb0/0xb0 [ 22.014642] [<ffffffff810600c7>] ? native_read_msr+0x7/0x40 [ 22.014657] [<ffffffff81688123>] intel_pstate_hwp_set+0x23/0x130 [ 22.014660] [<ffffffff81688406>] intel_pstate_set_policy+0x1b6/0x340 [ 22.014662] [<ffffffff816829bb>] cpufreq_set_policy+0xeb/0x2c0 [ 22.014664] [<ffffffff81682f39>] cpufreq_init_policy+0x79/0xe0 [ 22.014666] [<ffffffff81682cb0>] ? cpufreq_update_policy+0x120/0x120 [ 22.014669] [<ffffffff816833a6>] cpufreq_online+0x406/0x820 [ 22.014671] [<ffffffff8168381f>] cpufreq_add_dev+0x5f/0x90 [ 22.014717] [<ffffffff81530ac8>] subsys_interface_register+0xb8/0x100 [ 22.014719] [<ffffffff816821bc>] cpufreq_register_driver+0x14c/0x210 [ 22.014749] [<ffffffff81fe1d90>] intel_pstate_init+0x39d/0x4d5 [ 22.014751] [<ffffffff81fe13f2>] ? cpufreq_gov_dbs_init+0x12/0x12 Signed-off-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Aaro Koskinen authored
commit 899bb664 upstream. Skip invalid entries when searching the frequency. This fixes cpufreq at least on loongson2 MIPS board. Fixes: da0c6dc0 (cpufreq: Handle sorted frequency tables more efficiently) Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rafael J. Wysocki authored
commit abb66279 upstream. Commit d352cf47 (cpufreq: conservative: Do not use transition notifications) overlooked the case when the "frequency step" used by the conservative governor is small relative to the distances between the available frequencies and broke the algorithm by using policy->cur instead of the previously requested frequency when computing the next one. As a result, the governor may not be able to go outside of a narrow range between two consecutive available frequencies. Fix the problem by making the governor save the previously requested frequency and select the next one relative that value (unless it is out of range, in which case policy->cur will be used instead). Fixes: d352cf47 (cpufreq: conservative: Do not use transition notifications) Link: https://bugzilla.kernel.org/show_bug.cgi?id=177171Reported-and-tested-by:
Aleksey Rybalkin <aleksey@rybalkin.org> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dave Gerlach authored
commit e01072d2 upstream. Now that the cpufreq-dt-platdev is used to create the cpufreq-dt platform device for all OMAP platforms and the platform code that did it before has been removed, add ti,am33xx and ti,dra7xx to the machine list in cpufreq-dt-platdev which had relied on the removed platform code to do this previously. Fixes: 7694ca6e (cpufreq: omap: Use generic platdev driver) Signed-off-by:
Dave Gerlach <d-gerlach@ti.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sergei Shtylyov authored
commit e330b9a6 upstream. of_irq_get[_byname]() return 0 iff irq_create_of_mapping() call fails. Returning both error code and 0 on failure is a sign of a misdesigned API, it makes the failure check unnecessarily complex and error prone. We should rely on the platform IRQ resource in this case, not return 0, especially as 0 can be a valid IRQ resource too... Fixes: aff008ad ("platform_get_irq: Revert to platform_get_resource if of_irq_get fails") Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bjorn Helgaas authored
commit 8dd99bca upstream. The tegra_pcie_phy_disable() path called pads_writel() with arguments in the wrong order. Swap them to be the "value, offset" order expected by pads_writel(). Fixes: 6fe7c187 ("PCI: tegra: Support per-lane PHYs") Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Maik Broemme authored
commit 8e2e0317 upstream. Similar to the AR93xx and the AR94xx series, the AR95xx also have the same quirk for the Bus Reset. It will lead to instant system reset if the device is assigned via VFIO to a KVM VM. I've been able reproduce this behavior with a MikroTik R11e-2HnD. Fixes: c3e59ee4 ("PCI: Mark Atheros AR93xx to avoid bus reset") Signed-off-by:
Maik Broemme <mbroemme@libmpq.org> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Haibo Chen authored
commit 02265cd6 upstream. Potentially overflowing expression 1000000 * data->timeout_clks with type unsigned int is evaluated using 32-bit arithmetic, and then used in a context that expects an expression of type unsigned long long. To avoid overflow, cast 1000000U to type unsigned long long. Special thanks to Coverity. Fixes: 7f05538a ("mmc: sdhci: fix data timeout (part 2)") Signed-off-by:
Haibo Chen <haibo.chen@nxp.com> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Daniel Glöckner authored
commit 0ed50abb upstream. CMD23 aka SET_BLOCK_COUNT was introduced with MMC v3.1. Older versions of the specification allowed to terminate multi-block transfers only with CMD12. The patch fixes the following problem: mmc0: new MMC card at address 0001 mmcblk0: mmc0:0001 SDMB-16 15.3 MiB mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400900 ... blk_update_request: I/O error, dev mmcblk0, sector 0 Buffer I/O error on dev mmcblk0, logical block 0, async page read mmcblk0: unable to read partition table Signed-off-by:
Daniel Glöckner <dg@emlix.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Larry Finger authored
commit 0c9d3491 upstream. Some RTL8821AE devices sold in Great Britain have the country code of 0x25 encoded in their EEPROM. This value is not tested in the routine that establishes the regulatory info for the chip. The fix is to set this code to have the same capabilities as the EU countries. In addition, the channels allowed for COUNTRY_CODE_ETSI were more properly suited for China and Israel, not the EU. This problem has also been fixed. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rajkumar Manoharan authored
commit 0628467f upstream. Firmware is running watchdog timer for tracking copy engine ring index and write index. Whenever both indices are stuck at same location for given duration, watchdog will be trigger to assert target. While updating copy engine destination ring write index, driver ensures that write index will not be same as read index by finding delta between these two indices (CE_RING_DELTA). HTT target to host copy engine (CE5) is special case where ring buffers will be reused and delta check is not applied while updating write index. In rare scenario, whenever CE5 ring is full, both indices will be referring same location and this is causing CE ring stuck issue as explained above. This issue is originally reported on IPQ4019 during long hour stress testing and during veriwave max clients testsuites. The same issue is also observed in other chips as well. Fix this by ensuring that write index is one less than read index which means that full ring is available for receiving data. Tested-by:
Tamizh chelvam <c_traja@qti.qualcomm.com> Signed-off-by:
Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lin Huang authored
commit c8a9a6da upstream. there define two devfreq_event_get_drvdata() function in devfreq-event.h when disable CONFIG_PM_DEVFREQ_EVENT, it will lead to build fail. So remove devfreq_event_get_drvdata() function. Fixes: f262f28c ("PM / devfreq: event: Add devfreq_event class") Signed-off-by:
Lin Huang <hl@rock-chips.com> Signed-off-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Geert Uytterhoeven authored
commit 0278b34b upstream. Sometimes spidev_test crashes with: *** Error in `spidev_test': munmap_chunk(): invalid pointer: 0x00022020 *** Aborted or just Segmentation fault This is due to transfer_escaped_string() miscalculating the required size of the buffer by one byte, causing a buffer overflow in unescape(). Drop the bogus "+ 1" in the strlen() parameter to fix this. Note that unescape() never copies the zero-terminator of the source string, so it writes at most as many bytes as the length of the source string. Fixes: 30061915 (spi: spidev_test: Added input buffer from the terminal) Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lucas Stach authored
commit b1d51b44 upstream. The current clock tree only implements the minimal set of differences between the i.MX6Q and the i.MX6DL, but that doesn't really reflect reality. Apply the following fixes to match the RM: - DL has no GPU3D_SHADER_SEL/PODF, the shader domain is clocked by GPU3D_CORE - GPU3D_SHADER_SEL/PODF has been repurposed as GPU2D_CORE_SEL/PODF - GPU2D_CORE_SEL/PODF has been repurposed as MLB_SEL/PODF Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Acked-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lucas Stach authored
commit d8846023 upstream. Initialize the GPU clock muxes to sane inputs. Until now they have not been changed from their default values, which means that both GPU3D shader and GPU2D core were fed by clock inputs whose rates exceed the maximium allowed frequency of the cores by as much as 200MHz. This fixes a severe GPU stability issue on i.MX6DL. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Acked-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jan Remmet authored
commit 8f9165c9 upstream. http://www.ti.com/lit/pdf/SWCZ010: DCDC o/p voltage can go higher than programmed value Impact: VDDI, VDD2, and VIO output programmed voltage level can go higher than expected or crash, when coming out of PFM to PWM mode or using DVFS. Description: When DCDC CLK SYNC bits are 11/01: * VIO 3-MHz oscillator is the source clock of the digital core and input clock of VDD1 and VDD2 * Turn-on of VDD1 and VDD2 HSD PFETis synchronized or at a constant phase shift * Current pulled though VCC1+VCC2 is Iload(VDD1) + Iload(VDD2) * The 3 HSD PFET will be turned-on at the same time, causing the highest possible switching noise on the application. This noise level depends on the layout, the VBAT level, and the load current. The noise level increases with improper layout. When DCDC CLK SYNC bits are 00: * VIO 3-MHz oscillator is the source clock of digital core * VDD1 and VDD2 are running on their own 3-MHz oscillator * Current pulled though VCC1+VCC2 average of Iload(VDD1) + Iload(VDD2) * The switching noise of the 3 SMPS will be randomly spread over time, causing lower overall switching noise. Workaround: Set DCDCCTRL_REG[1:0]= 00. Signed-off-by:
Jan Remmet <j.remmet@phytec.de> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Usyskin authored
commit ac182e8a upstream. Add device ids for Intel Kabypoint PCH (Kabylake) Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-