- 16 May, 2012 40 commits
-
-
Avinash Patil authored
1. add start AP and stop AP handlers 2. support for parsing ssid, beacon period, DTIM period from beacon_parameters structure and setting it to FW. Signed-off-by:
Avinash Patil <patila@marvell.com> Signed-off-by:
Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by:
Kiran Divekar <dkiran@marvell.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Avinash Patil authored
Add support for setting fragmentation threshold, RTS threshold and retry limit. Since wiphy parameters are properties of physical device, appropriate function to set phy parameters is invoked depending upon bss_type(STA or AP) for each virtual interface. Signed-off-by:
-
Avinash Patil authored
mlan0: managed or ibss The iftype can be changed from STATION to ADHOC, and vice versa. uap0: AP only The iftype cannot be changed. Signed-off-by:
-
Avinash Patil authored
While in AP mode, we should stop BSS in deauthentication handler. Signed-off-by:
-
Avinash Patil authored
1. support for AP sys_config command and added parsing of channel information. 2. support for setting AP channel from cfg80211 set_channel handler Signed-off-by:
-
Avinash Patil authored
1. separate file for preparing uAP command buffer 2. definition of bss_start and bss_stop commands being sent to firmware Signed-off-by:
-
Avinash Patil authored
Modify key related cfg80211 handlers to copy peer mac address for pairwise keys. If peer mac address is not present or group keys, it will be sent as broadcast mac address. This would be required since hostapd downloads per peer PTK. Signed-off-by:
-
Avinash Patil authored
Since wiphy structure is per adapter we would save adapter, instead of mwifiex private pointer, in wiphy_priv. Also move country_info from mwifiex_private to mwifiex_adapter as making it part of mwifiex_adapter looks logical. Signed-off-by:
-
Avinash Patil authored
mwifiex supports STA and AP interfaces which use same phy. Indicate this to cfg80211. Signed-off-by:
-
Avinash Patil authored
1. wiphy structure is per device; hence moved it to mwifiex_adapter mwifiex_register_cfg80211 takes mwifiex_adapter as parameter. This function only registers wiphy with cfg80211. 2. Creation of interfaces is moved to cfg80211 add_virtual_interface handler. 3. Create 2 interfaces by default: station and AP Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
-
Avinash Patil authored
Commands like IBSS coalescing status, power save, 11D should be handled only when bss_type is STA. Signed-off-by:
-
Avinash Patil authored
Reserve space for one more priv structure. This will be used by AP interface. Signed-off-by:
-
Bjorn Helgaas authored
Use pci_is_pcie() instead of looking at obsolete is_pcie field in struct pci_dev. CC: Stefano Brivio <stefano.brivio@polimi.it> CC: b43-dev@lists.infradead.org CC: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by:
-
Johannes Berg authored
cfg80211_calculate_bitrate() doesn't work for MCS rates 32 or higher, and it has always returned 0 in that case. Warn if it ever really happens. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Johannes Berg authored
cfg80211_calculate_bitrate() is defined in the external header file cfg80211.h now, so no need to keep it in the internal one as well. Signed-off-by:
-
Cristian Chilipirea authored
Fixed some checkpatch warnings. Signed-off-by:
Cristian Chilipirea <cristian.chilipirea@gmail.com> Signed-off-by:
-
Johannes Berg authored
In commit 12d3952f ("mac80211: optimize aggregation session timeout handling") two bugs were introduced: 1) RCU usage was completely broken since no locks are held 2) the timer must not rearm when agg session is stopping Reported-and-tested-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by:
-
Johannes Berg authored
My queue management rework broke drivers that don't have multiple AC queues and register a single queue only, causing a warning: WARNING: at net/mac80211/iface.c:162 ieee80211_check_queues This was due to filling the queues wrongly and then noticing the error when checking later. Reported-and-Tested-by:
-
Nathan Hintz authored
Adds a missing read to flush the previous write (per the Broadcom SDK). Signed-off-by:
Nathan Hintz <nlhintz@hotmail.com> Signed-off-by:
-
Nathan Hintz authored
Add missing __devexit attribute to bcma_host_pci_remove. Signed-off-by:
-
Nathan Hintz authored
Modify ioremap_nocache calls to reflect the number of bytes read/written. Signed-off-by:
-
Nathan Hintz authored
PCI Memory Resource start address and size are variable, dependent on the H/W configuration. Modify the computation of io_map_base to use the computed values. Signed-off-by:
-
Nathan Hintz authored
The first thing bcm47xx_fill_sprom does is initialize (zero fill) the SPROM. For BCMA SOC, this wipes out any values previously read by bcm47xx_fill_sprom_ethernet (see arch/mips/bcm47xx/setup.c - bcm47xx_get_sprom_bcma). Move the initialization of SPROM so it is called prior to filling in any values. Signed-off-by:
-
Nathan Hintz authored
bcma_device_name only provides names for Broadcom cores. Modify logic to provide names for MIPS and ARM cores as well. Signed-off-by:
-
Hauke Mehrtens authored
This is based on code from the Broadcom SDK. Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Tested-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
-
Hauke Mehrtens authored
If brcmsmac is used on non PCI(s) devices it should not try to access bus->host_pci. Signed-off-by:
-
Hauke Mehrtens authored
The irq number is copied from the PCIe host device to the bcma cores so just request it using the bcma core device. Signed-off-by:
-
Hauke Mehrtens authored
There is no code doing anything useful in nicpci.c anymore, so remove it. Signed-off-by:
-
Hauke Mehrtens authored
This is now done in bcma by bcma_core_pci_fixcfg(). Signed-off-by:
-
Hauke Mehrtens authored
This is now done by calling bcma_core_pci_extend_L1time() Signed-off-by:
-
Hauke Mehrtens authored
This function is now unreferenced Signed-off-by:
-
Hauke Mehrtens authored
This is already done by bcma in bcma_pcicore_serdes_workaround(). Signed-off-by:
-
Hauke Mehrtens authored
This is now done by calling bcma_core_set_clockmode() Signed-off-by:
-
Hauke Mehrtens authored
This is now done by calling bcma_chipco_gpio_control(). Signed-off-by:
-
Hauke Mehrtens authored
ai_chipcontrl_epa4331 is not referenced by any method in brcmsmac and the functionality is already in bcma_chipco_bcm4331_ext_pa_lines_ctl in drivers/bcma/driver_chipcommon_pmu.c Signed-off-by:
-
Hauke Mehrtens authored
This is now done by calling bcma_core_pci_irq_ctl() Signed-off-by:
-
Hauke Mehrtens authored
This is now done by bcma_core_pci_config_fixup() in drivers/bcma/driver_pci.c Signed-off-by:
-
Hauke Mehrtens authored
The devices I know of are not using a PCIe core with rev <= 10. The BCM4718 uses a PCIe core with revision 14 and the BCM43224 uses a PCIe core with revision 15. This patch removes support for old PCIe core versions, which are not found on devices supported by brcmsmac. Signed-off-by:
-
Hauke Mehrtens authored
There are no devices which are using bcma and have a PCI bus, just a PCIe bus or something else. bcma does not support PCI devices, so lets also remove PCI support from brcmsmac. All devices currently supported by brcmsmac are PCIe based. Signed-off-by:
-
Hauke Mehrtens authored
The lowest chip common version used on bcma based devices is 31 on the bcm4718 and 32 on the bcm4313, bcm43224, and bcm43225, so the support for the old versions could be removed. Signed-off-by:
-
