- 06 Jul, 2018 6 commits
-
-
Deepak Rawat authored
New ioctls DRM_VMW_GB_SURFACE_CREATE_EXT and DRM_VMW_GB_SURFACE_REF_EXT are added which support 64-bit wide svga device surface flags, quality level and multisample pattern. Signed-off-by:
Deepak Rawat <drawat@vmware.com> Reviewed-by:
Sinclair Yeh <syeh@vmware.com> Reviewed-by:
Brian Paul <brianp@vmware.com> Reviewed-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
Charmaine Lee <charmainel@vmware.com> Signed-off-by:
-
Deepak Rawat authored
Since svga device introduced new 64bit SVGA3dSurfaceAllFlags, vmwgfx now stores the surface flags internally as SVGA3dSurfaceAllFlags. For legacy surface define commands, only lower 32-bit is used. Signed-off-by:
-
Deepak Rawat authored
SVGA device added new command SVGA3dCmdDefineGBSurface_v3 which allows 64-bit SVGA3dSurfaceAllFlags. This commit adds support for SVGA3dCmdDefineGBSurface_v3 command in vmwgfx. Signed-off-by:
-
Deepak Rawat authored
A boolean flag in device private structure to specify if the device support SM4_1. Signed-off-by:
-
Neha Bhende authored
A new command to support Intra-Surface-Copy. Signed-off-by:
Neha Bhende <bhenden@vmware.com> Reviewed-by:
-
Neha Bhende authored
The device exposes a new capability register. Add support for it. Signed-off-by:
-
- 04 Jul, 2018 1 commit
-
-
Deepak Rawat authored
This change updates the device headers to the latest device version. Where renaming affects the existing code, it's updated accordingly. Signed-off-by:
-
- 03 Jul, 2018 18 commits
-
-
Thomas Hellstrom authored
We've long ago given up on enforcing the device format is always little endian, so remove a leftover conversion. Signed-off-by:
-
Thomas Hellstrom authored
Make the host message module function declarations similar to the other declarations in vmwgfx_drv.h and include the header in vmwgfx_msg.c Signed-off-by:
-
Thomas Hellstrom authored
Reorganize the fence wait loop somewhat to make it look more like the examples in set_current_state() kerneldoc, and add some code comments. Also if we're about to time out, make sure we check again whether the fence is actually signaled. Signed-off-by:
-
Thomas Hellstrom authored
Make sure the error messages are a bit more descriptive, so that a log reader may understand what's gone wrong. Signed-off-by:
-
Deepak Rawat authored
As gui_x/y positioning is display unit is protected by requested_layout_mutex adding vmw_connector_state copy of the same and modeset commit will refer the state copy to sync with modeset_check state. v2: Tested with CONFIG_PROVE_LOCKING enabled. Signed-off-by:
-
Deepak Rawat authored
To avoid race condition between update_layout ioctl and modeset ioctl for access to gui_x/y positioning added a new mutex requested_layout_mutex. Also used drm_for_each_connector_iter to iterate over connector list. Signed-off-by:
-
Deepak Rawat authored
This validation is not required because user-space will send create_fb request once the memory is allocated. This check should be performed during mode-setting. Signed-off-by:
-
Deepak Rawat authored
For cases when full modeset is not requested like page-flip, skip memory validation as the topology is not changed. Signed-off-by:
-
Deepak Rawat authored
Call the same display memory validation function which is used by modeset_check. This ensure consistency that kernel change preferred mode/topology only if supported. Also change the internal function to use drm_rect instead of drm_vmw_rect. Signed-off-by:
-
Deepak Rawat authored
This patch adds display (primary) memory validation during modeset check. Display memory validation are applicable to both SOU and STDU, so allow both display unit to undergo this check. Also added check for SVGA_CAP_NO_BB_RESTRICTION capability which lifts bounding box restriction for STDU. Signed-off-by:
-
Sinclair Yeh authored
vmw_kms_atomic_check_modeset() is currently checking config using the legacy state, which is updated after a commit has happened. This means vmw_kms_atomic_check_modeset() will reject an invalid config on the next update rather than the current one. Fix this by using the new states for config checking Signed-off-by:
-
Thomas Hellstrom authored
Previously when evicting resources we were unconditionally calling ttm_eu_reserve_buffers with a NULL ww acquire context. That meant all buffer object reserves were done using trylock semantics. That makes sense when evicting during resource validation, because then there already are a number of buffers reserved and using waiting locks would cause lockdep errors. That's not the case when unconditionally evicting all resources as part of driver takedown or hibernation, so in that code path, make sure we have a ww acquire context to get waiting lock buffer object reserve semantics. Signed-off-by:
-
Thomas Hellstrom authored
Only try to unmap cached maps when the buffer is moved into or out from vram. Otherwise the underlying pages stay the same. Also when unbinding resources from MOBs about to move, make sure we're really moving out of MOB memory. Signed-off-by:
-
Thomas Hellstrom authored
It makes more sense to have all the buffer object related code in a single file rather than splitting it up between the resource code and buffer object pinning utilities. Place all buffer object related code in vmwgfx_bo.c. Fix up headers and export resource functionality when needed in the buffer object code. Signed-off-by:
-
Thomas Hellstrom authored
Initially vmware buffer objects were only used as DMA buffers, so the name DMA buffer was a natural one. However, currently they are used also as dumb buffers and MOBs backing guest backed objects so renaming them to buffer objects is logical. Particularly since there is a dmabuf subsystem in the kernel where a dma buffer means something completely different. This also renames user-space api structures and IOCTL names correspondingly, but the old names remain defined for now and the ABI hasn't changed. There are a couple of minor style changes to make checkpatch happy. Signed-off-by:
-
Thomas Hellstrom authored
For modeset locks we don't expect a high number of contending transactions so change algorithm from Wait-Die to Wound-Wait. Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Thomas Hellstrom authored
The current Wound-Wait mutex algorithm is actually not Wound-Wait but Wait-Die. Implement also Wound-Wait as a per-ww-class choice. Wound-Wait is, contrary to Wait-Die a preemptive algorithm and is known to generate fewer backoffs. Testing reveals that this is true if the number of simultaneous contending transactions is small. As the number of simultaneous contending threads increases, Wait-Wound becomes inferior to Wait-Die in terms of elapsed time. Possibly due to the larger number of held locks of sleeping transactions. Update documentation and callers. Timings using git://people.freedesktop.org/~thomash/ww_mutex_test tag patch-18-06-15 Each thread runs 100000 batches of lock / unlock 800 ww mutexes randomly chosen out of 100000. Four core Intel x86_64: Algorithm #threads Rollbacks time Wound-Wait 4 ~100 ~17s. Wait-Die 4 ~150000 ~19s. Wound-Wait 16 ~360000 ~109s. Wait-Die 16 ~450000 ~82s. Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-doc@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Co-authored-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Peter Ziljstra authored
Make the WW mutex code more readable by adding comments, splitting up functions and pointing out that we're actually using the Wait-Die algorithm. Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-doc@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Co-authored-by:
-
- 28 Jun, 2018 2 commits
-
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for 4.19: Cross-subsystem Changes: devicetree documentation dt-bindings defintions for sun8i (Jernej Skrabec) Core Changes: Consider drivers setting DRIVER_ATOMIC as atomic (Eric Anholt) Improvements for in-kernel clients (Noralf Trønnes) Export and rename drm_crtc_port_mask() (Jernej Skrabec) Driver Changes: v3d: Add looking for GPU scheduler jobs management (Eric Anholt) Add Ilitek ILI9881c panel driver(Maxime Ripard) rockchip: vop: fixup linebuffer mode calc error (Sandy Huang) tinydrm: new driver for ILI9341 display panels (David Lechner) sun4i: Add TCON TOP driver (Jernej Skrabec) Signed-off-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180628010018.GA10929@juma
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
Chris is doing many reworks that allow us to get full-ppgtt supported on all platforms back to HSW. As well many other fix and improvements, Including: - Use GEM suspend when aborting initialization (Chris) - Change i915_gem_fault to return vm_fault_t (Chris) - Expand VMA to Non gem object entities (Chris) - Improve logs for load failure, but quite logging on fault injection to avoid noise on CI (Chris) - Other page directory handling fixes and improvements for gen6 (Chris) - Other gtt clean-up removing redundancies and unused checks (Chris) - Reorder aliasing ppgtt fini (Chris) - Refactor of unsetting obg->mm.pages (Chris) - Apply batch location restrictions before pinning (Chris) - Ringbuffer fixes for context restore (Chris) - Execlist fixes on freeing error pointer on allocation error (Chris) - Make closing request flush mandatory (Chris) - Move GEM sanitize from resume_early to resume (Chris) - Improve debug dumps (Chris) - Silent compiler for selftest (Chris) - Other execlists changes to improve hangcheck and reset. - Many gtt page directory fixes and improvements (Chris) - Reorg context workarounds (Chris) - Avoid ERR_PTR dereference on selftest (Chris) Other GEM related work: - Stop trying to reset GPU if reset failed (Mika) - Add HW workaround for KBL to fix GPU reset (Mika) - Fix context ban and hang accounting for client (Mika) - Fixes on OA perf (Michel, Jani) - Refactor on GuC log mechanisms (Piotr) - Enable provoking vertex fix on Gen9 system (Kenneth) More ICL patches for Display enabling: - ICL - 10-bit support for HDMI (RK) - ICL - Start adding TBT PLL (Paulo) - ICL - DDI HDMK level selection (Manasi) - ICL - GMBUS GPIO pin mapping fix (Mahesh) - ICL - Adding DP_AUX_E support (James) - ICL - Display interrupts handling (DK) Other display fixes and improvements: - Fix sprite destination color keying on SKL+ (Ville) - Fixes and improvements on PCH detection, specially for non PCH systems (Jani) - Document PCH_NOP (Lucas) - Allow DBLSCAN user modes with eDP/LVDS/DSI (Ville) - Opregion and ACPI cleanup and organization (Jani) - Kill delays when activation psr (Rodrigo) - ...and a consequent fix of the psr activation flow (DK) - Fix HDMI infoframe setting (Imre) - Fix Display interrupts and modes on old gens (Ville) - Start switching to kernel unsigned int types (Jani) - Introduction to Amber Lake and Whiskey Lake platforms (Jose) - Audio clock fixes for HBR3 (RK) - Standardize i915_reg.h definitions according to our doc and checkpatch (Paulo) - Remove unused timespec_to_jiffies_timeout function (Arnd) - Increase the scope of PSR wake fix for other VBTs out there (Vathsala) - Improve debug msgs with prop name/id (Ville) - Other clean up on unecessary cursor size defines (Ville) - Enforce max hdisplay/hblank_start limits on HSW/BDW (Ville) - Make ELD pointers constant (Jani) - Fix for PSR VBT parse (Colin) - Add warn about unsupported CDCLK rates (Imre) Signed-off-by:
-
- 27 Jun, 2018 13 commits
-
-
Jernej Skrabec authored
drm_of_find_possible_crtcs() doesn't work when DW HDMI encoder is connected to TCON (crtc) through mux in TCON TOP. In that case TCON TOP HDMI mux input port has to be manually traversed and checked if it matches any known crtc. Signed-off-by:
Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-23-jernej.skrabec@siol.net
-
Jernej Skrabec authored
Function is useful when drm_of_find_possible_crtcs() can't be used and custom parsing is needed. This can happen for example when there is a node with multiple muxes between crtc and encoder. Reviewed-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
-
Jernej Skrabec authored
PHY is the same as in H3, except it can switch between two clock parents. Signed-off-by:
-
Jernej Skrabec authored
Expand HDMI PHY clock driver to support second clock parent. Signed-off-by:
-
Jernej Skrabec authored
Some DW HDMI PHYs, like those found in A64 and R40 SoCs, can select between two clock parents. Add code which reads second PLL from DT. Signed-off-by:
-
Jernej Skrabec authored
DW HDMI PHY driver and PHY clock driver share same registers. Make sure that DW HDMI PHY setup code doesn't change any clock related bits. During initialization, set PHY PLL parent bit to 0. Signed-off-by:
-
Jernej Skrabec authored
Current DW HDMI PHY code never prepares and enables PHY clock after it is created. It's just used as it is. This may work in some cases, but it's clearly wrong. Fix it by adding proper calls to enable/disable PHY clock. Fixes: 4f86e817 ("drm/sun4i: Add support for H3 HDMI PHY variant") Signed-off-by:
-
Jernej Skrabec authored
A64 HDMI PHY is similar to H3 HDMI PHY except it has two possible PLL clock parents. It is compatible to other HDMI PHYs, like that found in R40. Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Jernej Skrabec authored
Both mixers have similar capabilities as others SoCs with DE2. First mixer has 1 VI and 3 UI planes and supports HW scaling on all planes. Second mixer has 1 VI and 1 UI planes and also supports HW scaling on all planes. Signed-off-by:
-
Jernej Skrabec authored
TV TCONs are always connected to TV or HDMI encoder, so it doesn't make sense to check if panel or bridge is connected to them. Check if TCON has channel 0 and only then check for connected panel or bridges. Signed-off-by:
-
Jernej Skrabec authored
LVDS and RGB interfaces are always connected to TCONs which have channel 0. It doesn't make sense to try to init them on TV TCONs. Add a check if TCON has channel 0 before trying to init LVDS or RGB interface. Signed-off-by:
-
Jernej Skrabec authored
Current "old" method to find engine worked pretty well for DE2. However, it doesn't work when TCON TOP is between mixer (engine) and TCON. TCON TOP has multiple input ports, but current engine search algorithm expects only one. This can be fixed by first looking for output port id and selecting matching input by subtracting 1 for the next round. This work even if there is only one input and output. Signed-off-by:
-
Jernej Skrabec authored
TV TCONs (channel 1 only) are always connected to TV or HDMI encoder. Because of that, all output endpoints on such TCON node will point to a encoder which is part of component framework. Correct current graph traversing algorithm in such way that it doesn't skip output enpoints with id 0 on TV TCONs. Signed-off-by:
-
