- 04 Feb, 2017 10 commits
-
-
Lance Richardson authored
[ Upstream commit 75f01a4c ] When executing conntrack actions on skbuffs with checksum mode CHECKSUM_COMPLETE, the checksum must be updated to account for header pushes and pulls. Otherwise we get "hw csum failure" logs similar to this (ICMP packet received on geneve tunnel via ixgbe NIC): [ 405.740065] genev_sys_6081: hw csum failure [ 405.740106] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G I 4.10.0-rc3+ #1 [ 405.740108] Call Trace: [ 405.740110] <IRQ> [ 405.740113] dump_stack+0x63/0x87 [ 405.740116] netdev_rx_csum_fault+0x3a/0x40 [ 405.740118] __skb_checksum_complete+0xcf/0xe0 [ 405.740120] nf_ip_checksum+0xc8/0xf0 [ 405.740124] icmp_error+0x1de/0x351 [nf_conntrack_ipv4] [ 405.740132] nf_conntrack_in+0xe1/0x550 [nf_conntrack] [ 405.740137] ? find_bucket.isra.2+0x62/0x70 [openvswitch] [ 405.740143] __ovs_ct_lookup+0x95/0x980 [openvswitch] [ 405.740145] ? netif_rx_internal+0x44/0x110 [ 405.740149] ovs_ct_execute+0x147/0x4b0 [openvswitch] [ 405.740153] do_execute_actions+0x22e/0xa70 [openvswitch] [ 405.740157] ovs_execute_actions+0x40/0x120 [openvswitch] [ 405.740161] ovs_dp_process_packet+0x84/0x120 [openvswitch] [ 405.740166] ovs_vport_receive+0x73/0xd0 [openvswitch] [ 405.740168] ? udp_rcv+0x1a/0x20 [ 405.740170] ? ip_local_deliver_finish+0x93/0x1e0 [ 405.740172] ? ip_local_deliver+0x6f/0xe0 [ 405.740174] ? ip_rcv_finish+0x3a0/0x3a0 [ 405.740176] ? ip_rcv_finish+0xdb/0x3a0 [ 405.740177] ? ip_rcv+0x2a7/0x400 [ 405.740180] ? __netif_receive_skb_core+0x970/0xa00 [ 405.740185] netdev_frame_hook+0xd3/0x160 [openvswitch] [ 405.740187] __netif_receive_skb_core+0x1dc/0xa00 [ 405.740194] ? ixgbe_clean_rx_irq+0x46d/0xa20 [ixgbe] [ 405.740197] __netif_receive_skb+0x18/0x60 [ 405.740199] netif_receive_skb_internal+0x40/0xb0 [ 405.740201] napi_gro_receive+0xcd/0x120 [ 405.740204] gro_cell_poll+0x57/0x80 [geneve] [ 405.740206] net_rx_action+0x260/0x3c0 [ 405.740209] __do_softirq+0xc9/0x28c [ 405.740211] irq_exit+0xd9/0xf0 [ 405.740213] do_IRQ+0x51/0xd0 [ 405.740215] common_interrupt+0x93/0x93 Fixes: 7f8a436e ("openvswitch: Add conntrack action") Signed-off-by:
Lance Richardson <lrichard@redhat.com> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Shannon Nelson authored
[ Upstream commit 003c9410 ] Fix up a data alignment issue on sparc by swapping the order of the cookie byte array field with the length field in struct tcp_fastopen_cookie, and making it a proper union to clean up the typecasting. This addresses log complaints like these: log_unaligned: 113 callbacks suppressed Kernel unaligned access at TPC[976490] tcp_try_fastopen+0x2d0/0x360 Kernel unaligned access at TPC[9764ac] tcp_try_fastopen+0x2ec/0x360 Kernel unaligned access at TPC[9764c8] tcp_try_fastopen+0x308/0x360 Kernel unaligned access at TPC[9764e4] tcp_try_fastopen+0x324/0x360 Kernel unaligned access at TPC[976490] tcp_try_fastopen+0x2d0/0x360 Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Shannon Nelson <shannon.nelson@oracle.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit 148d3d02 ] The __bcm_sysport_tx_reclaim() function is used to reclaim transmit resources in different places within the driver. Most of them should not affect the state of the transit flow control. Introduce bcm_sysport_tx_clean() which cleans the ring, but does not re-enable flow control towards the networking stack, and make bcm_sysport_tx_reclaim() do the actual transmit queue flow control. Fixes: 80105bef ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
David Ahern authored
[ Upstream commit 8a430ed5 ] rtm_table is an 8-bit field while table ids are allowed up to u32. Commit 709772e6 ("net: Fix routing tables with id > 255 for legacy software") added the preference to set rtm_table in dumps to RT_TABLE_COMPAT if the table id is > 255. The table id returned on get route requests should do the same. Fixes: c36ba660 ("net: Allow user to get table id from route lookup") Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
David Ahern authored
[ Upstream commit ea7a8085 ] Handle failure in lwtunnel_fill_encap adding attributes to skb. Fixes: 571e7226 ("ipv4: support for fib route lwtunnel encap attributes") Fixes: 19e42e45 ("ipv6: support for fib route lwtunnel encap attributes") Signed-off-by:
-
Elad Raz authored
[ Upstream commit 28e46a0f ] The event_data starts from address 0x00-0x0C and not from 0x08-0x014. This leads to duplication with other fields in the Event Queue Element such as sub-type, cqn and owner. Fixes: eda6500a ("mlxsw: Add PCI bus implementation") Signed-off-by:
Elad Raz <eladr@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Arkadi Sharshevsky authored
[ Upstream commit 400fc010 ] During transmission the skb is checked for headroom in order to add vendor specific header. In case the skb needs to be re-allocated, skb_realloc_headroom() is called to make a private copy of the original, but doesn't release it. Current code assumes that the original skb is released during reallocation and only releases it at the error path which causes a memory leak. Fix this by adding the original skb release to the main path. Fixes: d003462a ("mlxsw: Simplify mlxsw_sx_port_xmit function") Signed-off-by:
Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by:
-
Arkadi Sharshevsky authored
[ Upstream commit 36bf38d1 ] During transmission the skb is checked for headroom in order to add vendor specific header. In case the skb needs to be re-allocated, skb_realloc_headroom() is called to make a private copy of the original, but doesn't release it. Current code assumes that the original skb is released during reallocation and only releases it at the error path which causes a memory leak. Fix this by adding the original skb release to the main path. Fixes: 56ade8fe ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
stephen hemminger authored
[ Upstream commit 0719e72c ] The receive callback (in tasklet context) is using RCU to get reference to associated VF network device but this is not safe. RCU read lock needs to be held. Found by running with full lockdep debugging enabled. Fixes: f207c10d ("hv_netvsc: use RCU to protect vf_netdev") Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
-
hayeswang authored
[ Upstream commit 19c0f40d ] Fix the hw rx checksum is always enabled, and the user couldn't switch it to sw rx checksum. Note that the RTL_VER_01 only support sw rx checksum only. Besides, the hw rx checksum for RTL_VER_02 is disabled after commit b9a321b4 ("r8152: Fix broken RX checksums."). Re-enable it. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
- 01 Feb, 2017 30 commits
-
-
Greg Kroah-Hartman authored
-
Francisco Jerez authored
commit 4fc020d8 upstream. The WaDisableLSQCROPERFforOCL workaround has the side effect of disabling an L3SQ optimization that has huge performance implications and is unlikely to be necessary for the correct functioning of usual graphic workloads. Userspace is free to re-enable the workaround on demand, and is generally in a better position to determine whether the workaround is necessary than the DRM is (e.g. only during the execution of compute kernels that rely on both L3 fences and HDC R/W requests). The same workaround seems to apply to BDW (at least to production stepping G1) and SKL as well (the internal workaround database claims that it does for all steppings, while the BSpec workaround table only mentions pre-production steppings), but the DRM doesn't do anything beyond whitelisting the L3SQCREG4 register so userspace can enable it when it sees fit. Do the same on KBL platforms. Improves performance of the GFXBench4 gl_manhattan31 benchmark by 60%, and gl_4 (AKA car chase) by 14% on a KBL GT2 running Mesa master -- This is followed by a regression of 35% and 10% respectively for the same benchmarks and platform caused by my recent patch series switching userspace to use the dataport constant cache instead of the sampler to implement uniform pull constant loads, which caused us to hit more heavily the L3 cache (and on platforms other than KBL had the opposite effect of improving performance of the same two benchmarks). The overall effect on KBL of this change combined with the recent userspace change is respectively 4.6% and 2.6%. SynMark2 OglShMapPcf was affected by the constant cache changes (though it improved as it did on other platforms rather than regressing), but is not significantly affected by this patch (with statistical significance of 5% and sample size 20). v2: Drop some more code to avoid unused variable warning. Fixes: 738fa1b3 ("drm/i915/kbl: Add WaDisableLSQCROPERFforOCL") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99256Signed-off-by:
Francisco Jerez <currojerez@riseup.net> Cc: Matthew Auld <matthew.william.auld@gmail.com> Cc: Eero Tamminen <eero.t.tamminen@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: beignet@lists.freedesktop.org Reviewed-by:
Mika Kuoppala <mika.kuoppala@intel.com> [Removed double Fixes tag] Signed-off-by:
Jani Nikula <jani.nikula@intel.com> [ Francisco Jerez: Rebase on v4.9 branch. ] Signed-off-by:
-
Peter Zijlstra authored
commit 321027c1 upstream. Di Shen reported a race between two concurrent sys_perf_event_open() calls where both try and move the same pre-existing software group into a hardware context. The problem is exactly that described in commit: f63a8daa ("perf: Fix event->ctx locking") ... where, while we wait for a ctx->mutex acquisition, the event->ctx relation can have changed under us. That very same commit failed to recognise sys_perf_event_context() as an external access vector to the events and thereby didn't apply the established locking rules correctly. So while one sys_perf_event_open() call is stuck waiting on mutex_lock_double(), the other (which owns said locks) moves the group about. So by the time the former sys_perf_event_open() acquires the locks, the context we've acquired is stale (and possibly dead). Apply the established locking rules as per perf_event_ctx_lock_nested() to the mutex_lock_double() for the 'move_group' case. This obviously means we need to validate state after we acquire the locks. Reported-by: Di Shen (Keen Lab) Tested-by:
John Dias <joaodias@google.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Min Chong <mchong@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: f63a8daa ("perf: Fix event->ctx locking") Link: http://lkml.kernel.org/r/20170106131444.GZ3174@twins.programming.kicks-ass.netSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
David Rientjes authored
commit 3674534b upstream. When memory.move_charge_at_immigrate is enabled and precharges are depleted during move, mem_cgroup_move_charge_pte_range() will attempt to increase the size of the precharge. Prevent precharges from ever looping by setting __GFP_NORETRY. This was probably the intention of the GFP_KERNEL & ~__GFP_NORETRY, which is pointless as written. Fixes: 0029e19e ("mm: memcontrol: remove explicit OOM parameter in charge path") Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1701130208510.69402@chino.kir.corp.google.comSigned-off-by:
David Rientjes <rientjes@google.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Andy Shevchenko authored
commit 5a00b6c2 upstream. The commit 1c6c6952 ("genirq: Reject bogus threaded irq requests") starts refusing misconfigured interrupt handlers. This makes intel_mid_powerbtn not working anymore. Add a mandatory flag to a threaded IRQ request in the driver. Fixes: 1c6c6952 ("genirq: Reject bogus threaded irq requests") Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Dan Carpenter authored
commit 63d762b8 upstream. There is an off-by-one error so we don't unregister priv->pdev_mux[0]. Also it's slightly simpler as a while loop instead of a for loop. Fixes: 58cbbee2 ("x86/platform/mellanox: Introduce support for Mellanox systems platform") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Vadim Pasternak <vadimp@mellanox.com> Signed-off-by:
-
Robin Murphy authored
commit f7f6634d upstream. Once DMA API usage is enabled, it becomes apparent that virtio-mmio is inadvertently relying on the default 32-bit DMA mask, which leads to problems like rapidly exhausting SWIOTLB bounce buffers. Ensure that we set the appropriate 64-bit DMA mask whenever possible, with the coherent mask suitably limited for the legacy vring as per a0be1db4 ("virtio_pci: Limit DMA mask to 44 bits for legacy virtio devices"). Cc: Andy Lutomirski <luto@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Reported-by:
Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Fixes: b4211138 ("virtio_mmio: Use the DMA API if enabled") Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Yasuaki Ishimatsu authored
commit 8a1f780e upstream. online_{kernel|movable} is used to change the memory zone to ZONE_{NORMAL|MOVABLE} and online the memory. To check that memory zone can be changed, zone_can_shift() is used. Currently the function returns minus integer value, plus integer value and 0. When the function returns minus or plus integer value, it means that the memory zone can be changed to ZONE_{NORNAL|MOVABLE}. But when the function returns 0, there are two meanings. One of the meanings is that the memory zone does not need to be changed. For example, when memory is in ZONE_NORMAL and onlined by online_kernel the memory zone does not need to be changed. Another meaning is that the memory zone cannot be changed. When memory is in ZONE_NORMAL and onlined by online_movable, the memory zone may not be changed to ZONE_MOVALBE due to memory online limitation(see Documentation/memory-hotplug.txt). In this case, memory must not be onlined. The patch changes the return type of zone_can_shift() so that memory online operation fails when memory zone cannot be changed as follows: Before applying patch: # grep -A 35 "Node 2" /proc/zoneinfo Node 2, zone Normal <snip> node_scanned 0 spanned 8388608 present 7864320 managed 7864320 # echo online_movable > memory4097/state # grep -A 35 "Node 2" /proc/zoneinfo Node 2, zone Normal <snip> node_scanned 0 spanned 8388608 present 8388608 managed 8388608 online_movable operation succeeded. But memory is onlined as ZONE_NORMAL, not ZONE_MOVABLE. After applying patch: # grep -A 35 "Node 2" /proc/zoneinfo Node 2, zone Normal <snip> node_scanned 0 spanned 8388608 present 7864320 managed 7864320 # echo online_movable > memory4097/state bash: echo: write error: Invalid argument # grep -A 35 "Node 2" /proc/zoneinfo Node 2, zone Normal <snip> node_scanned 0 spanned 8388608 present 7864320 managed 7864320 online_movable operation failed because of failure of changing the memory zone from ZONE_NORMAL to ZONE_MOVABLE Fixes: df429ac0 ("memory-hotplug: more general validation of zone during online") Link: http://lkml.kernel.org/r/2f9c3837-33d7-b6e5-59c0-6ca4372b2d84@gmail.comSigned-off-by:
Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Reviewed-by:
Reza Arbab <arbab@linux.vnet.ibm.com> Signed-off-by:
-
Andy Shevchenko authored
commit 04ff5a09 upstream. The commit 658b476c ("pinctrl: baytrail: Add debounce configuration") implements debounce for Baytrail pin control, but seems wasn't tested properly. The register which keeps debounce value is separated from the configuration one. Writing wrong values to the latter will guarantee wrong behaviour of the driver and even might break something physically. Besides above there is missed case how to disable it, which is actually done through the bit in configuration register. Rectify implementation here by using proper register for debounce value. Fixes: 658b476c ("pinctrl: baytrail: Add debounce configuration") Cc: Cristina Ciocan <cristina.ciocan@intel.com> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Masahiro Yamada authored
commit df1539c2 upstream. Fix the pin-mux values for the MDC, MDIO, MDIO_INTL, PHYRSTL pins. Fixes: 1e359ab1 ("pinctrl: uniphier: add Ethernet pin-mux settings") Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Mika Westerberg authored
commit ecc89953 upstream. PADCFGLOCK (and PADCFGLOCK_TX) offset in Broxton actually starts at 0x060 and not 0x090 as used in the driver. Fix it to use the correct offset. Signed-off-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
commit c739c0a7 upstream. A rare randconfig build failure shows up in this driver when the CRC32 helper is not there: drivers/media/built-in.o: In function `s5k4ecgx_s_power': s5k4ecgx.c:(.text+0x9eb4): undefined reference to `crc32_le' This adds the 'select' that all other users of this function have. Fixes: 8b99312b ("[media] Add v4l2 subdev driver for S5K4ECGX sensor") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Yonatan Cohen authored
commit 2d4b21e0 upstream. On UD QP completer tasklet is scheduled for each packet sent. If it is followed by a destroy_qp(), the kernel panic will happen as the completer tries to operate on a destroyed QP. Fixes: 8700e3e7 ("Soft RoCE driver") Signed-off-by:
Yonatan Cohen <yonatanc@mellanox.com> Reviewed-by:
Moni Shoua <monis@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Maor Gottlieb authored
commit f39f7752 upstream. The first argument of list_add_tail is the new item and the second is the head of the list. Fix the code to pass arguments in the right order, otherwise not all the rxe devices will be removed during teardown. Fixes: 8700e3e7 ('Soft RoCE driver') Signed-off-by:
Maor Gottlieb <maorg@mellanox.com> Reviewed-by:
-
Kenneth Lee authored
commit 828f6fa6 upstream. 1. Release pid before enter odp flow 2. Release pid when fail to allocate memory Fixes: 87773dd5 ("IB: ib_umem_release() should decrement mm->pinned_vm from ib_umem_get") Fixes: 8ada2c1c ("IB/core: Add support for on demand paging regions") Signed-off-by:
Kenneth Lee <liguozhu@hisilicon.com> Reviewed-by:
Haggai Eran <haggaie@mellanox.com> Reviewed-by:
-
Ander Conselvan de Oliveira authored
commit 6d1d427a upstream. In intel_crtc_disable_noatomic(), bail on a failure to allocate an atomic state to avoid a NULL pointer dereference. Fixes: 4a806558 ("drm/i915: Pass atomic state to crtc enable/disable functions") Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Signed-off-by:
Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1484922525-6131-4-git-send-email-ander.conselvan.de.oliveira@intel.com (cherry picked from commit 31bb2ef9) Signed-off-by:
-
Ander Conselvan de Oliveira authored
commit 3781bd6e upstream. Parameters tile_size, tile_width and tile_height were passed in the wrong order to _intel_adjust_tile_offset() when calculating the rotated offsets. This doesn't fix any user visible bug, since for packed formats new and old offset are the same and the rotated offsets are within a tile before they are fed to _intel_adjust_tile_offset(). In that case, the offsets are unchanged. That is not true for planar formats, but those are currently not supported. Fixes: 66a2d927 ("drm/i915: Make intel_adjust_tile_offset() work for linear buffers") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Signed-off-by:
-
Ander Conselvan de Oliveira authored
commit 21d6e0bd upstream. An error in the condition for avoiding the call to intel_hpd_poll_init() for valleyview and cherryview from intel_runtime_suspend() caused it to be called unconditionally. Fix it. Fixes: 19625e85 ("drm/i915: Enable polling when we don't have hpd") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Lyude <cpaul@redhat.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Signed-off-by:
-
Ander Conselvan de Oliveira authored
commit c34f0786 upstream. In the path where intel_crt_detect_ddc() detects a CRT, if would return true without freeing the edid. Fixes: a2bd1f54 ("drm/i915: check whether we actually received an edid in detect_ddc") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Signed-off-by:
-
Clint Taylor authored
commit 27892bbd upstream. The .disable_display parameter was causing a fatal crash when fbdev was dereferenced during driver init. V1: protection in i915_drv.c V2: Moved protection to intel_fbdev.c Fixes: 43cee314 ("drm/i915/fbdev: Limit the global async-domain synchronization") Testcase: igt/drv_module_reload/basic-no-display Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Clint Taylor <clinton.a.taylor@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1484775523-29428-1-git-send-email-clinton.a.taylor@intel.comReviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Lukas Wunner <lukas@wunner.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by:
-
Chris Wilson authored
commit e88893fe upstream. Missed when rebasing patches, I failed to set ret to zero before starting the unbind loop (which depends upon ret being zero). Reported-by:
Matthew Auld <matthew.william.auld@gmail.com> Fixes: 9332f3b1 ("drm/i915: Combine loops within i915_gem_evict_something") Signed-off-by:
-
Laurent Pinchart authored
commit 79d6205a upstream. The s_stream() handler incorrectly writes the whole MISC_CTL register to enable or disable the outputs, overriding the output pinmuxing configuration. Fix it to only touch the output enable bits. The CONF_SHARED_PIN register is also written by the same function, resulting in muxing the INTREQ signal instead of the VBLK/GPCL signal on the INTREQ/GPCL/VBLK pin. As the driver doesn't support interrupts this is obviously incorrect, and breaks operation on other devices. Fix it by removing the write. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
commit b4b2de38 upstream. The FID/GLCO/VLK/HVLK and INTREQ/GPCL/VBLK pins are muxed differently depending on whether the input is an S-Video or composite signal. The comment that explains the logic doesn't reflect the code. It appears that the comment is incorrect, as disabling the output data bus in composite mode makes no sense. Update the comment to match the code. While at it define macros for the MISC_CTL register bits, the code is too confusing with numerical values. Signed-off-by:
-
Laurent Pinchart authored
commit aff808e8 upstream. The tvp5150 doesn't support format setting through the subdev pad API and thus implements the set format handler as a get format operation. The single handler, tvp5150_fill_fmt(), resets the device by calling tvp5150_reset(). This causes malfunction as the device can be reset at will, possibly from userspace when the subdev userspace API is enabled. The reset call was added in commit ec2c4f3f ("[media] media: tvp5150: Add mbus_fmt callbacks"), probably as an attempt to set the device to a known state before detecting the current TV standard. However, the get format handler doesn't access the hardware to get the TV standard since commit 963ddc63 ("[media] media: tvp5150: Add cropping support"). There is thus no need to reset the device when getting the format. However, removing the tvp5150_reset() from the get/set format handlers results in the function not being called at all if the bridge driver doesn't use the .reset() operation. The operation is nowadays abused and shouldn't be used, so shouldn't expect bridge drivers to call it. To make sure the device is properly initialize, move the reset call from the format handlers to the probe function. Signed-off-by:
-
Max Kellermann authored
commit 48775cb7 upstream. commit 73d5c5c8 ("[media] pctv452e: don't do DMA on stack") caused a NULL pointer dereference which occurs when dvb_usb_init() calls dvb_usb_device_power_ctrl() for the first time, before the frontend has been attached. It also caused a recursive deadlock because tt3650_ci_msg_locked() has already locked the mutex. So, partially revert it, but move the buffer to the heap (DMA capable), not to the stack (may not be DMA capable). Instead of sharing one buffer which needs mutex protection, do a new heap allocation for each call. Fixes: commit 73d5c5c8 ("[media] pctv452e: don't do DMA on stack") Signed-off-by:
Max Kellermann <max.kellermann@gmail.com> Signed-off-by:
-
Steve Wise authored
commit c12a67fe upstream. Commit ad61a4c7 ("iw_cxgb4: don't block in destroy_qp awaiting the last deref") introduced a bug where the RDMA QP EQ queue memory (and QIDs) are possibly freed before the underlying connection has been fully shutdown. The result being a possible DMA read issued by HW after the queue memory has been unmapped and freed. This results in possible WR corruption in the worst case, system bus errors if an IOMMU is in use, and SGE "bad WR" errors reported in the very least. The fix is to defer unmap/free of queue memory and QID resources until the QP struct has been fully dereferenced. To do this, the c4iw_ucontext must also be kept around until the last QP that references it is fully freed. In addition, since the last QP deref can happen in an IRQ disabled context, we need a new workqueue thread to do the final unmap/free of the EQ queue memory. Fixes: ad61a4c7 ("iw_cxgb4: don't block in destroy_qp awaiting the last deref") Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
-
Kinglong Mee authored
commit c929ea0b upstream. After removing sunrpc module, I get many kmemleak information as, unreferenced object 0xffff88003316b1e0 (size 544): comm "gssproxy", pid 2148, jiffies 4294794465 (age 4200.081s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffffb0cfb58a>] kmemleak_alloc+0x4a/0xa0 [<ffffffffb03507fe>] kmem_cache_alloc+0x15e/0x1f0 [<ffffffffb0639baa>] ida_pre_get+0xaa/0x150 [<ffffffffb0639cfd>] ida_simple_get+0xad/0x180 [<ffffffffc06054fb>] nlmsvc_lookup_host+0x4ab/0x7f0 [lockd] [<ffffffffc0605e1d>] lockd+0x4d/0x270 [lockd] [<ffffffffc06061e5>] param_set_timeout+0x55/0x100 [lockd] [<ffffffffc06cba24>] svc_defer+0x114/0x3f0 [sunrpc] [<ffffffffc06cbbe7>] svc_defer+0x2d7/0x3f0 [sunrpc] [<ffffffffc06c71da>] rpc_show_info+0x8a/0x110 [sunrpc] [<ffffffffb044a33f>] proc_reg_write+0x7f/0xc0 [<ffffffffb038e41f>] __vfs_write+0xdf/0x3c0 [<ffffffffb0390f1f>] vfs_write+0xef/0x240 [<ffffffffb0392fbd>] SyS_write+0xad/0x130 [<ffffffffb0d06c37>] entry_SYSCALL_64_fastpath+0x1a/0xa9 [<ffffffffffffffff>] 0xffffffffffffffff I found, the ida information (dynamic memory) isn't cleanup. Signed-off-by:
Kinglong Mee <kinglongmee@gmail.com> Fixes: 2f048db4 ("SUNRPC: Add an identifier for struct rpc_clnt") Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Benjamin Coddington authored
commit a430607b upstream. Some nfsv4.0 servers may return a mode for the verifier following an open with EXCLUSIVE4 createmode, but this does not mean the client should skip setting the mode in the following SETATTR. It should only do that for EXCLUSIVE4_1 or UNGAURDED createmode. Fixes: 5334c5bd ("NFS: Send attributes in OPEN request for NFS4_CREATE_EXCLUSIVE4_1") Signed-off-by:
Benjamin Coddington <bcodding@redhat.com> Signed-off-by:
-
Trond Myklebust authored
commit 8ac09251 upstream. We cannot call nfs4_handle_exception() without first ensuring that the slot has been freed. If not, we end up deadlocking with the process waiting for recovery to complete, and recovery waiting for the slot table to drain. Fixes: 2e80dbe7 ("NFSv4.1: Close callback races for OPEN, LAYOUTGET...") Signed-off-by:
-
Chuck Lever authored
commit 059aa734 upstream. Xuan Qi reports that the Linux NFSv4 client failed to lock a file that was migrated. The steps he observed on the wire: 1. The client sent a LOCK request to the source server 2. The source server replied NFS4ERR_MOVED 3. The client switched to the destination server 4. The client sent the same LOCK request to the destination server with a bumped lock sequence ID 5. The destination server rejected the LOCK request with NFS4ERR_BAD_SEQID RFC 3530 section 8.1.5 provides a list of NFS errors which do not bump a lock sequence ID. However, RFC 3530 is now obsoleted by RFC 7530. In RFC 7530 section 9.1.7, this list has been updated by the addition of NFS4ERR_MOVED. Reported-by:
Xuan Qi <xuan.qi@oracle.com> Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
-
