Everyone can write to these files, which is not what we want.

Cc: stable@vger.kernel.org # 3.15
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Build throws following errors when CONFIG_SMP=n
arch/powerpc/platforms/powernv/subcore.c: In function ‘cpu_update_split_mode’:
arch/powerpc/platforms/powernv/subcore.c:274:15: error: ‘setup_max_cpus’ undeclared (first use in this function)
arch/powerpc/platforms/powernv/subcore.c:285:5: error: lvalue required as left operand of assignment

'setup_max_cpus' variable is relevant only on SMP, so there is no point
working around it for UP. Furthermore, subcore itself is relevant only
on SMP and hence the better solution is to exclude subcore.o and
subcore-asm.o for UP builds.
Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Build throws following errors when CONFIG_SMP=n
arch/powerpc/platforms/powernv/setup.c: In function ‘pnv_kexec_wait_secondaries_down’:
arch/powerpc/platforms/powernv/setup.c:179:4: error: implicit declaration of function ‘get_hard_smp_processor_id’
    rc = opal_query_cpu_status(get_hard_smp_processor_id(i),

The usage of get_hard_smp_processor_id() needs the declaration from
<asm/smp.h>. The file setup.c includes <linux/sched.h>, which in-turn
includes <linux/smp.h>. However, <linux/smp.h> includes <asm/smp.h>
only on SMP configs and hence UP builds fail.

Fix this by directly including <asm/smp.h> in setup.c unconditionally.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

OPAL will mark a CPU that is guarded as "bad" in the status property of the CPU
node.

Unfortunatley Linux doesn't check this property and will put the bad CPU in the
present map.  This has caused hangs on booting when we try to unsplit the core.

This patch checks the CPU is avaliable via this status property before putting
it in the present map.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Tested-by: Anton Blanchard <anton@samba.org>
cc: stable@vger.kernel.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Correct the DSCR SPR becoming temporarily corrupted if a task is
context switched during a transaction.

The problem occurs while suspending the task and is caused by saving
the DSCR to thread.dscr after it has already been set to the CPU's
default value:

__switch_to() calls __switch_to_tm()
	which calls tm_reclaim_task()
	which calls tm_reclaim_thread()
	which calls tm_reclaim()
		where the DSCR is set to the CPU's default
__switch_to() calls _switch()
		where thread.dscr is set to the DSCR

When the task is resumed, it's transaction will be doomed (as usual)
and the DSCR SPR will be corrupted, although the checkpointed value
will be correct. Therefore the DSCR will be immediately corrected by
the transaction aborting, unless it has been suspended. In that case
the incorrect value can be seen by the task until it resumes the
transaction.

The fix is to treat the DSCR similarly to the TAR and save it early
in __switch_to().

A program exposing the problem is added to the kernel self tests as:
tools/testing/selftests/powerpc/tm/tm-resched-dscr.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
CC: <stable@vger.kernel.org> [v3.10+]
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

__attribute__ ((unused))

WSP is the last user of CONFIG_PPC_A2, so we remove that as well.

Although CONFIG_PPC_ICSWX still exists, it's no longer selectable for
any Book3E platform, so we can remove the code in mmu-book3e.h that
depended on it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

The Kconfig symbol SERIAL_TEXT_DEBUG was removed from
arch/powerpc/Kconfig.debug in v2.6.22. (In v2.6.27 it was also removed
from arch/ppc/Kconfig.debug.) So the check for its macro has evaluated
to false for over five years now. Remove that check and the few lines
of code hidden behind it.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

The Vector Crypto category instructions are supported by current POWER8
chips, advertise them to userspace using a specific bit to properly
differentiate with chips of the same architecture level that might not
have them.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org> [v3.10+]

Pull watchdog updates from Wim Van Sebroeck:
 "This contains:
   - addition of the Intel MID watchdog
   - removal of W83697HF and W83697UG drivers (code was merged into
     w83627hf_wdt driver)
   - addition of Armada 375/380 SoC support
   - conversion of imx2_wdt to regmap API and to watchdog core API
   - lots of other small improvements and fixes"

[ Wim was also tagged by gmail as a spammer, but not delayed by days
  unlike Ben ]

* git://www.linux-watchdog.org/linux-watchdog: (25 commits)
  x86: intel-mid: add watchdog platform code for Merrifield
  watchdog: add Intel MID watchdog driver support
  watchdog: sp805: Set watchdog_device->timeout from ->set_timeout()
  booke/watchdog: refine and clean up the codes
  watchdog: iop_wdt only builds for mach-iop13xx
  watchdog: Remove drivers for W83697HF and W83697UG
  watchdog: w83627hf_wdt: Add early_disable module parameter
  ARM: mvebu: Add A375/A380 watchdog binding documentation
  watchdog: orion: Add Armada 375/380 SoC support
  watchdog: orion: Introduce per-SoC enabled() function
  watchdog: orion: Introduce per-SoC stop() function
  watchdog: orion: Remove unneeded atomic access
  watchdog: orion: Introduce a SoC-specific RSTOUT mapping
  watchdog: orion: Move the register ioremap'ing to its own function
  watchdog: xilinx: Make of_device_id array const
  watchdog: imx2_wdt: convert to watchdog core api
  watchdog: imx2_wdt: convert to use regmap API.
  watchdog: imx2_wdt: Sort the header files alphabetically
  watchdog: ath79_wdt: switch to clk_prepare/clk_disable
  watchdog: ath79_wdt: avoid spurious restarts on AR934x
  ...

Pull powerpc updates from Ben Herrenschmidt:
 "Here is the bulk of the powerpc changes for this merge window.  It got
  a bit delayed in part because I wasn't paying attention, and in part
  because I discovered I had a core PCI change without a PCI maintainer
  ack in it.  Bjorn eventually agreed it was ok to merge it though we'll
  probably improve it later and I didn't want to rebase to add his ack.

  There is going to be a bit more next week, essentially fixes that I
  still want to sort through and test.

  The biggest item this time is the support to build the ppc64 LE kernel
  with our new v2 ABI.  We previously supported v2 userspace but the
  kernel itself was a tougher nut to crack.  This is now sorted mostly
  thanks to Anton and Rusty.

  We also have a fairly big series from Cedric that add support for
  64-bit LE zImage boot wrapper.  This was made harder by the fact that
  traditionally our zImage wrapper was always 32-bit, but our new LE
  toolchains don't really support 32-bit anymore (it's somewhat there
  but not really "supported") so we didn't want to rely on it.  This
  meant more churn that just endian fixes.

  This brings some more LE bits as well, such as the ability to run in
  LE mode without a hypervisor (ie. under OPAL firmware) by doing the
  right OPAL call to reinitialize the CPU to take HV interrupts in the
  right mode and the usual pile of endian fixes.

  There's another series from Gavin adding EEH improvements (one day we
  *will* have a release with less than 20 EEH patches, I promise!).

  Another highlight is the support for the "Split core" functionality on
  P8 by Michael.  This allows a P8 core to be split into "sub cores" of
  4 threads which allows the subcores to run different guests under KVM
  (the HW still doesn't support a partition per thread).

  And then the usual misc bits and fixes ..."

[ Further delayed by gmail deciding that BenH is a dirty spammer.
  Google knows.  ]

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (155 commits)
  powerpc/powernv: Add missing include to LPC code
  selftests/powerpc: Test the THP bug we fixed in the previous commit
  powerpc/mm: Check paca psize is up to date for huge mappings
  powerpc/powernv: Pass buffer size to OPAL validate flash call
  powerpc/pseries: hcall functions are exported to modules, need _GLOBAL_TOC()
  powerpc: Exported functions __clear_user and copy_page use r2 so need _GLOBAL_TOC()
  powerpc/powernv: Set memory_block_size_bytes to 256MB
  powerpc: Allow ppc_md platform hook to override memory_block_size_bytes
  powerpc/powernv: Fix endian issues in memory error handling code
  powerpc/eeh: Skip eeh sysfs when eeh is disabled
  powerpc: 64bit sendfile is capped at 2GB
  powerpc/powernv: Provide debugfs access to the LPC bus via OPAL
  powerpc/serial: Use saner flags when creating legacy ports
  powerpc: Add cpu family documentation
  powerpc/xmon: Fix up xmon format strings
  powerpc/powernv: Add calls to support little endian host
  powerpc: Document sysfs DSCR interface
  powerpc: Fix regression of per-CPU DSCR setting
  powerpc: Split __SYSFS_SPRSETUP macro
  arch: powerpc/fadump: Cleaning up inconsistent NULL checks
  ...

Pull x86 platform driver updates from Matthew Garrett:
 "Very little of excitement here - the most significant is a new driver
  for detecting device freefall on Dells, other than that it's pretty
  much entirely minor fixes for specific machines"

* 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86:
  hp-wmi: Enable hotkeys on some systems
  thinkpad_acpi: Add mappings for F9 - F12 hotkeys on X240 / T440 / T540
  platform: x86: dell-smo8800: Dell Latitude freefall driver (ACPI SMO8800/SMO8810)
  ideapad_laptop: Introduce the use of the managed version of kzalloc
  platform/x86: Fix run-time dependencies of OLPC drivers
  platform: x86: asus-wmi.c: Cleaning up uninitialized variables
  ix86/mid/thermal: Introduce the use of the managed version of kzalloc
  platform x86 Kconfig: Refer to the laptop list in the Compal driver help
  Documentation: Add list of laptop models supported by the Compal driver
  ideapad-laptop: Blacklist rfkill control on the Lenovo Yoga 2 11
  asus-wmi: Set WAPF to 4 for Asus X550CA
  alienware-wmi: For WMAX HDMI method, introduce a way to query HDMI cable status
  alienware-wmi: Update WMAX brightness method limit to 15
  pvpanic: Set high notifier priority
  platform/x86: samsung-laptop: Add support for Samsung's NP7[34]0U3E models.
  toshiba_acpi: Add alternative keymap support for Satellite M840
  platform-drivers-x86: intel_pmic_gpio: Fix off-by-one valid offset range check

This is a third attempt to enable these buttons. The new variable being
commit 997daa1b (i.e. hp-wmi: detect
"2009 BIOS or later"). Older systems that do not have the 2009 BIOS query
method respond with a dummy value, in this case 4. Using that, we can
target a fairly narrow group of systems. i.e. old enough to not have
HPWMI_FEATURE_QUERY 0xd, but new enough to have HPWMI_BIOS_QUERY 0x9.
This group may be further limited if some systems respond with something
other than 4 to non-existant feature queries.
Signed-off-by: Kyle Evans <kvans32@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

The T440s user guide says that when Fn-lock is not active, the *40s' F9 - F12
keys should be mapped to: control-panel, search, show-all-windows and Computer.

These keys generate the sofar unused 28 - 31 hotkey scancodes.

For the first 2 this nicely matches the icons on the keys, for the latter 2
the icons are somewhat creative, which is why I ended up looking them up in
the user manual.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

This acpi driver provide supports for freefall sensors SMO8800/SMO8810 which
can be found on Dell Latitude laptops. Driver register /dev/freefall misc
device which has same interface as driver hp_accel freefall driver. So any
existing applications for HP freefall sensor /dev/freefall will work for with
this new driver for Dell Latitude laptops too.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Cc: Sonal Santan <sonal.santan@gmail.com>
Tested-By: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Acked-By: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

This patch moves data allocated using kzalloc to managed data allocated
using devm_kzalloc and cleans now unnecessary kfrees in probe and remove
functions. The label sysfs_failed is removed as it is no longer
required.  Also, linux/device.h is added to make sure the devm_*()
routine declarations are unambiguously available.

The following Coccinelle semantic patch was used for making the change:

@platform@
identifier p, probefn, removefn;
@@
struct platform_driver p = {
  .probe = probefn,
  .remove = removefn,
};

@prb@
identifier platform.probefn, pdev;
expression e, e1, e2;
@@
probefn(struct platform_device *pdev, ...) {
  <+...
- e = kzalloc(e1, e2)
+ e = devm_kzalloc(&pdev->dev, e1, e2)
  ...
?-kfree(e);
  ...+>
}

@rem depends on prb@
identifier platform.removefn;
expression e;
@@
removefn(...) {
  <...
- kfree(e);
  ...>
}
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

Let the xo15-ebook driver depend on OLPC as all other OLPC drivers
already do. Add COMPILE_TEST as an alternative for both xo1-rfkill
and xo15-ebook, to increase the build testing coverage.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

There is a risk that the variable will be used without being initialized.

This was largely found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

This patch moves data allocated using kzalloc to managed data allocated
using devm_kzalloc and cleans now unnecessary kfrees in probe and remove
functions.

The following Coccinelle semantic patch was used for making the change:

@platform@
identifier p, probefn, removefn;
@@
struct platform_driver p = {
  .probe = probefn,
  .remove = removefn,
};

@prb@
identifier platform.probefn, pdev;
expression e, e1, e2;
@@
probefn(struct platform_device *pdev, ...) {
  <+...
- e = kzalloc(e1, e2)
+ e = devm_kzalloc(&pdev->dev, e1, e2)
  ...
?-kfree(e);
  ...+>
}

@rem depends on prb@
identifier platform.removefn;
expression e;
@@
removefn(...) {
  <...
- kfree(e);
  ...>
}
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

Signed-off-by: Ismael Luceno <ismael.luceno@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

Signed-off-by: Ismael Luceno <ismael.luceno@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

The Lenovo Yoga 2 11 always reports everything as blocked, causing userspace
to not even try to use the wlan / bluetooth even though they work fine.

Note this patch also removes the "else priv->rfk[i] = NULL;" bit of the
rfkill initialization, it is not necessary as the priv struct is allocated
with kzalloc.
Reported-and-tested-by: Vincent Gerris <vgerris@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

The 'asus-nb-wmi' WAPF parameter must be set to 4, so the internal Wireless LAN device is operational.
Signed-off-by: Andreas Utterberg <andreas.utterberg@thundera.se>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

Since there are now multiple HDMI attributes associated with the WMAX method,
create a sysfs group for them instead.
Signed-off-by: Mario Limonciello <mario_limonciello@dell.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

Merge leftovers from Andrew Morton:
 "A few leftovers: ocfs2, gcov, RTC"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  rtc: s5m: consolidate two device type switch statements
  rtc: s5m: add support for S2MPS14 RTC
  rtc: s5m: support different register layout
  rtc: s5m: use shorter time of register update
  rtc: s5m: remove undocumented time init on first boot
  mfd/rtc: sec/s5m: rename SEC* symbols to S5M
  gcov: add support for GCC 4.9
  ocfs2/o2net: incorrect to terminate accepting connections loop upon rejecting an invalid one

In probe the configuration of driver for different chipsets was done in
two switch (pdata->device_type) statements.  Consolidate them into one
switch statement to increase code readability.

Additionally check the return value of regmap_irq_get_virq and exit
probe on error.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Sangbeom Kim <sbkim73@samsung.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add support for S2MPS14 to the rtc-s5m driver.  Differences in S2MPS14
(in comparison to S5M8767):

 - Layout of registers
 - Lack of century support for time and alarms (7 registers used for
   storing time/alarm)
 - Two buffer control registers: WUDR and RUDR
 - No register for enabling writing time
 - RTC interrupts are reported in main PMIC I2C device
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Sangbeom Kim <sbkim73@samsung.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Prepare for adding support for S2MPS14 RTC device to the rtc-s5m driver:

1. Add a map of registers used by the driver which differ between
   the chipsets (S5M876X and S2MPS14).

2. Move code of checking for alarm pending to separate function.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Sangbeom Kim <sbkim73@samsung.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Set the time needed for updating alarm and time registers to 0.45 ms.
The default is 7.32 ms which is too long and leads to warnings when
setting alarm or time:

	s5m-rtc: waiting for UDR update, reached max number of retries
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Sangbeom Kim <sbkim73@samsung.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove the code for initializing time if this is first boot.

The code for detecting first boot uses undocumented field RTC_TCON in
RTC_UDR_CON register.  According to S5M8767's datasheet this field is
reserved.  On S2MPS14 it is not documented at all.

On device first boot the registers will be initialized with reset value
(2000-01-01 00:00:00).

The code might work on S5M8763 but still this does not look like a task
for RTC driver.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Sangbeom Kim <sbkim73@samsung.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Prepare for adding support for S2MPS14 RTC device to the rtc-s5m driver:

1. Rename SEC* symbols to S5M.
2. Add S5M prefix to some of defines which are different between S5M876X
   and S2MPS14.

This is only a rename-like patch, new code is not added.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Sangbeom Kim <sbkim73@samsung.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch handles the gcov-related changes in GCC 4.9:

  A new counter (time profile) is added. The total number is 9 now.

  A new profile merge function __gcov_merge_time_profile is added.

See gcc/gcov-io.h and libgcc/libgcov-merge.c

For the first change, the layout of struct gcov_info is affected.

For the second one, a dummy function is added to kernel/gcov/base.c
similarly.
Signed-off-by: Yuan Pengfei <coolypf@qq.com>
Acked-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When o2net-accept-one() rejects an illegal connection, it terminates the
loop picking up the remaining queued connections.  This fix will
continue accepting connections till the queue is emtpy.

Addresses Orabug 17489469.
Signed-off-by: Tariq Saseed <tariq.x.saeed@oracle.com>
Signed-off-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Right now when people try to report issues in the kernel they send stack
dumps to eachother, which looks something like this:

  [    6.906437]  [<ffffffff811f0e90>] ? backtrace_test_irq_callback+0x20/0x20
  [    6.907121]  [<ffffffff84388ce8>] dump_stack+0x52/0x7f
  [    6.907640]  [<ffffffff811f0ec8>] backtrace_regression_test+0x38/0x110
  [    6.908281]  [<ffffffff813596a0>] ? proc_create_data+0xa0/0xd0
  [    6.908870]  [<ffffffff870a8040>] ? proc_modules_init+0x22/0x22
  [    6.909480]  [<ffffffff810020c2>] do_one_initcall+0xc2/0x1e0
  [...]

However, most of the text you get is pure garbage.

The only useful thing above is the function name.  Due to the amount of
different kernel code versions and various configurations being used,
the kernel address and the offset into the function are not really
helpful in determining where the problem actually occured.

Too often the result of someone looking at a stack dump is asking the
person who sent it for a translation for one or more 'addr2line'
translations.  Which slows down the entire process of debugging the
issue (and really annoying).

The decode_stacktrace script is an attempt to make the output more
useful and easy to work with by translating all kernel addresses in the
stack dump into line numbers.  Which means that the stack dump would
look like this:

  [  635.148361]  dump_stack (lib/dump_stack.c:52)
  [  635.149127]  warn_slowpath_common (kernel/panic.c:418)
  [  635.150214]  warn_slowpath_null (kernel/panic.c:453)
  [  635.151031]  _oalloc_pages_slowpath+0x6a/0x7d0
  [  635.152171]  ? zone_watermark_ok (mm/page_alloc.c:1728)
  [  635.152988]  ? get_page_from_freelist (mm/page_alloc.c:1939)
  [  635.154766]  __alloc_pages_nodemask (mm/page_alloc.c:2766)

It's pretty obvious why this is better than the previous stack dump
before.

Usage is pretty simple:

        ./decode_stacktrace.sh [vmlinux] [base path]

Where vmlinux is the vmlinux to extract line numbers from and base path
is the path that points to the root of the build tree, for example:

        ./decode_stacktrace.sh vmlinux /home/sasha/linux/ < input.log > output.log

The stack trace should be piped through it (I, for example, just pipe
the output of the serial console of my KVM test box through it).
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull NFS client updates from Trond Myklebust:
 "Highlights include:

   - massive cleanup of the NFS read/write code by Anna and Dros
   - support multiple NFS read/write requests per page in order to deal
     with non-page aligned pNFS striping.  Also cleans up the r/wsize <
     page size code nicely.
   - stable fix for ensuring inode is declared uptodate only after all
     the attributes have been checked.
   - stable fix for a kernel Oops when remounting
   - NFS over RDMA client fixes
   - move the pNFS files layout driver into its own subdirectory"

* tag 'nfs-for-3.16-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (79 commits)
  NFS: populate ->net in mount data when remounting
  pnfs: fix lockup caused by pnfs_generic_pg_test
  NFSv4.1: Fix typo in dprintk
  NFSv4.1: Comment is now wrong and redundant to code
  NFS: Use raw_write_seqcount_begin/end int nfs4_reclaim_open_state
  xprtrdma: Disconnect on registration failure
  xprtrdma: Remove BUG_ON() call sites
  xprtrdma: Avoid deadlock when credit window is reset
  SUNRPC: Move congestion window constants to header file
  xprtrdma: Reset connection timeout after successful reconnect
  xprtrdma: Use macros for reconnection timeout constants
  xprtrdma: Allocate missing pagelist
  xprtrdma: Remove Tavor MTU setting
  xprtrdma: Ensure ia->ri_id->qp is not NULL when reconnecting
  xprtrdma: Reduce the number of hardway buffer allocations
  xprtrdma: Limit work done by completion handler
  xprtrmda: Reduce calls to ib_poll_cq() in completion handlers
  xprtrmda: Reduce lock contention in completion handlers
  xprtrdma: Split the completion queue
  xprtrdma: Make rpcrdma_ep_destroy() return void
  ...

Pull MMC update from Chris Ball:
 "MMC highlights for 3.16:

  Core:
   - support HS400 mode of eMMC 5.0, via DT bindings mmc-hs400-1_{2,8}v
   - if card init at 3.3v doesn't work, try 1.8v and 1.2v too

  Drivers:
   - moxart: New driver for MOXA ART SoCs
   - rtsx_usb_sdmmc: New driver for Realtek USB card readers
   - sdhci: Large rework around IRQ/regulator handling, remove card_tasklet
   - sdhci-pci-o2micro: Add SeaBird SeaEagle SD3 support
   - sunxi: New driver for Allwinner sunxi SoCs
   - usdhi6rol0: New driver for Renesas SD/SDIO controller"

* tag 'mmc-updates-for-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (95 commits)
  mmc: sdhci-s3c: use mmc_of_parse and remove the card_tasklet
  mmc: add a driver for the Renesas usdhi6rol0 SD/SDIO host controller
  mmc: sdhci-of-esdhc: Fixup compile error
  mmc: tegra: fix reporting of base clock frequency
  mmc: tegra: disable UHS modes
  mmc: sdhci-dove: use mmc_of_parse() and remove card_tasklet CD handler
  MAINTAINERS: mmc: Add path to git tree
  mmc: dove: fix missing MACH_DOVE dependency
  mmc: sdhci: SD tuning is broken for some controllers
  mmc: sdhci-esdhc-imx: fix mmc ddr mode regression issue
  mmc: sdhci-pci-o2micro: Add SeaBird SeaEagle SD3 support
  mmc: omap_hsmmc: split omap-dma header file
  mmc: omap_hsmmc: fix cmd23 multiblock read/write
  mmc: omap_hsmmc: use devm_ioremap_resource
  mmc: omap_hsmmc: use devm_request_threaded_irq
  mmc: omap_hsmmc: use devm_request_irq
  mmc: omap_hsmmc: use devm_clk_get
  mmc: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs
  mmc: wmt-sdmmc: Use GFP_KERNEL instead of hard-coded value
  mmc: omap: Use DIV_ROUND_UP instead of open coded
  ...

The kernel has no concept of capabilities with respect to inodes; inodes
exist independently of namespaces.  For example, inode_capable(inode,
CAP_LINUX_IMMUTABLE) would be nonsense.

This patch changes inode_capable to check for uid and gid mappings and
renames it to capable_wrt_inode_uidgid, which should make it more
obvious what it does.

Fixes CVE-2014-4014.

Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Serge Hallyn <serge.hallyn@ubuntu.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: stable@vger.kernel.org
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch adds platform code for Intel Merrifield.
Since the watchdog is not part of SFI table, we have no other option but
to manually register watchdog's platform device (argh!).
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Add initial Intel MID watchdog driver support.

This driver is an initial implementation of generic Intel MID watchdog
driver. Currently it supports Intel Merrifield platform.
Signed-off-by: Eric Ernst <eric.ernst@intel.com>
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Implementation of ->set_timeout() is supposed to set 'timeout' field of 'struct
watchdog_device' passed to it. sp805 was rather setting this in a local
variable. Fix it.
Reported-by: Arun Ramamurthy <arun.ramamurthy@broadcom.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: <stable@vger.kernel.org> # 2.6.36+

Basically, this patch does the following:
1. Move the codes of parsing boot parameters from setup-common.c
   to driver. In this way, code reader can know directly that
   there are boot parameters that can change the timeout.
2. Make boot parameter 'booke_wdt_period' effective.
   currently, when driver is loaded, default timeout is always
   being used in stead of booke_wdt_period.
3. Wrap up the watchdog timeout in device struct and clean up
   unnecessary codes.
Signed-off-by: Tang Yuantian <yuantian.tang@freescale.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Reviewed-by: Li Yang <leoli@freescale.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>