- 30 Oct, 2017 11 commits
-
-
Linus Walleij authored
I forgot to account for the fact that the device core holds a reference to a device added with device_initialize() that need to be released with a corresponding put_device() to reach a 0 refcount at the end of the lifecycle. This led to a NULL pointer reference when freeing the device when e.g. unbidning the host device in sysfs. Fix this and use the device .release() callback to free the IDA and free:ing the memory used by the RPMB device. Before this patch: /sys/bus/amba/drivers/mmci-pl18x$ echo 80114000.sdi4_per2 > unbind [ 29.797332] mmc3: card 0001 removed [ 29.810791] Unable to handle kernel NULL pointer dereference at virtual address 00000050 [ 29.818878] pgd = de70c000 [ 29.821624] [00000050] *pgd=1e70a831, *pte=00000000, *ppte=00000000 [ 29.827911] Internal error: Oops: 17 [#1] PREEMPT SMP ARM [ 29.833282] Modules linked in: [ 29.836334] CPU: 1 PID: 154 Comm: sh Not tainted 4.14.0-rc3-00039-g83318e309566-dirty #736 [ 29.844604] Hardware name: ST-Ericsson Ux5x0 platform (Device Tree Support) [ 29.851562] task: de572700 task.stack: de742000 [ 29.856079] PC is at kernfs_find_ns+0x8/0x100 [ 29.860443] LR is at kernfs_find_and_get_ns+0x30/0x48 After this patch: /sys/bus/amba/drivers/mmci-pl18x$ echo 80005000.sdi4_per2 > unbind [ 20.623382] mmc3: card 0001 removed Fixes: 97548575 ("mmc: block: Convert RPMB to a character device") Reported-by:Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
Ulf Hansson <ulf.hansson@linaro.org>
-
Linus Walleij authored
This function is used by the block layer queue to bail out of requests if the current request is towards an RPMB "block device". This was done to avoid boot time scanning of this "block device" which was never really a block device, thus duct-taping over the fact that it was badly engineered. This problem is now gone as we removed the offending RPMB block device in another patch and replaced it with a character device. Cc: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Linus Walleij authored
The RPMB partition on the eMMC devices is a special area used for storing cryptographically safe information signed by a special secret key. To write and read records from this special area, authentication is needed. The RPMB area is *only* and *exclusively* accessed using ioctl():s from userspace. It is not really a block device, as blocks cannot be read or written from the device, also the signed chunks that can be stored on the RPMB are actually 256 bytes, not 512 making a block device a real bad fit. Currently the RPMB partition spawns a separate block device named /dev/mmcblkNrpmb for each device with an RPMB partition, including the creation of a block queue with its own kernel thread and all overhead associated with this. On the Ux500 HREFv60 platform, for example, the two eMMCs means that two block queues with separate threads are created for no use whatsoever. I have concluded that this block device design for RPMB is actually pretty wrong. The RPMB area should have been designed to be accessed from /dev/mmcblkN directly, using ioctl()s on the main block device. It is however way too late to change that, since userspace expects to open an RPMB device in /dev/mmcblkNrpmb and we cannot break userspace. This patch tries to amend the situation using the following strategy: - Stop creating a block device for the RPMB partition/area - Instead create a custom, dynamic character device with the same name. - Make this new character device support exactly the same set of ioctl()s as the old block device. - Wrap the requests back to the same ioctl() handlers, but issue them on the block queue of the main partition/area, i.e. /dev/mmcblkN We need to create a special "rpmb" bus type in order to get udev and/or busybox hot/coldplug to instantiate the device node properly. Before the patch, this appears in 'ps aux': 101 root 0:00 [mmcqd/2rpmb] 123 root 0:00 [mmcqd/3rpmb] After applying the patch these surplus block queue threads are gone, but RPMB is as usable as ever using the userspace MMC tools, such as 'mmc rpmb read-counter'. We get instead those dynamice devices in /dev: brw-rw---- 1 root root 179, 0 Jan 1 2000 mmcblk0 brw-rw---- 1 root root 179, 1 Jan 1 2000 mmcblk0p1 brw-rw---- 1 root root 179, 2 Jan 1 2000 mmcblk0p2 brw-rw---- 1 root root 179, 5 Jan 1 2000 mmcblk0p5 brw-rw---- 1 root root 179, 8 Jan 1 2000 mmcblk2 brw-rw---- 1 root root 179, 16 Jan 1 2000 mmcblk2boot0 brw-rw---- 1 root root 179, 24 Jan 1 2000 mmcblk2boot1 crw-rw---- 1 root root 248, 0 Jan 1 2000 mmcblk2rpmb brw-rw---- 1 root root 179, 32 Jan 1 2000 mmcblk3 brw-rw---- 1 root root 179, 40 Jan 1 2000 mmcblk3boot0 brw-rw---- 1 root root 179, 48 Jan 1 2000 mmcblk3boot1 brw-rw---- 1 root root 179, 33 Jan 1 2000 mmcblk3p1 crw-rw---- 1 root root 248, 1 Jan 1 2000 mmcblk3rpmb Notice the (248,0) and (248,1) character devices for RPMB. Cc: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
yangbo lu authored
SD clock should be disabled for clock value 0. It's not right to just return. This may cause failure of signal voltage switching. Signed-off-by:
Yangbo Lu <yangbo.lu@nxp.com> Acked-by:
-
Adrian Hunter authored
Add PCI Id for Intel CDF. Signed-off-by:
-
Wolfram Sang authored
The function was removed half a year ago, so this declaration can go, too. Fixes: 51ced59c ("mmc: sdhci-pci: Use ACPI DSM to get driver strength for some Intel devices") Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by:
-
Bjorn Andersson authored
The delay circuit used to support HS400 is calibrated based on two additional clocks. When these clocks are not available and FF_CLK_SW_RST_DIS is not set in CORE_HC_MODE, reset might fail. But on some platforms this doesn't work properly and below dump can be seen in the kernel log. mmc0: Reset 0x1 never completed. mmc0: sdhci: ============ SDHCI REGISTER DUMP =========== mmc0: sdhci: Sys addr: 0x00000000 | Version: 0x00001102 mmc0: sdhci: Blk size: 0x00004000 | Blk cnt: 0x00000000 mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x00000000 mmc0: sdhci: Present: 0x01f80000 | Host ctl: 0x00000000 mmc0: sdhci: Power: 0x00000000 | Blk gap: 0x00000000 mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000002 mmc0: sdhci: Timeout: 0x00000000 | Int stat: 0x00000000 mmc0: sdhci: Int enab: 0x00000000 | Sig enab: 0x00000000 mmc0: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 mmc0: sdhci: Caps: 0x742dc8b2 | Caps_1: 0x00008007 mmc0: sdhci: Cmd: 0x00000000 | Max curr: 0x00000000 mmc0: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x00000000 mmc0: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000 mmc0: sdhci: Host ctl2: 0x00000000 mmc0: sdhci: ============================================ Add support for the additional calibration clocks to allow these platforms to be configured appropriately. Cc: Venkat Gopalakrishnan <venkatg@codeaurora.org> Cc: Ritesh Harjani <riteshh@codeaurora.org> Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by:
Rob Herring <robh@kernel.org> Tested-by:
Jeremy McNicoll <jeremymc@redhat.com> Signed-off-by:
-
Bjorn Andersson authored
By stuffing the runtime controlled clocks into a clk_bulk_data array we can utilize the newly introduced bulk clock operations and clean up the error paths. This allow us to handle additional clocks in subsequent patch, without the added complexity. Cc: Ritesh Harjani <riteshh@codeaurora.org> Signed-off-by:
-
Krishna Reddy authored
SDHCI controllers on Tegra186 support 40 bit addressing. IOVA addresses are 48-bit wide on Tegra186. SDHCI host common code sets dma mask as either 32-bit or 64-bit. To avoid access issues when SMMU is enabled, disable 64-bit dma. Signed-off-by:
Krishna Reddy <vdumpa@nvidia.com> Tested-by:
Thierry Reding <treding@nvidia.com> Acked-by:
-
Ulf Hansson authored
-
Ulf Hansson authored
-
- 29 Oct, 2017 29 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix route leak in xfrm_bundle_create(). 2) In mac80211, validate user rate mask before configuring it. From Johannes Berg. 3) Properly enforce memory limits in fair queueing code, from Toke Hoiland-Jorgensen. 4) Fix lockdep splat in inet_csk_route_req(), from Eric Dumazet. 5) Fix TSO header allocation and management in mvpp2 driver, from Yan Markman. 6) Don't take socket lock in BH handler in strparser code, from Tom Herbert. 7) Don't show sockets from other namespaces in AF_UNIX code, from Andrei Vagin. 8) Fix double free in error path of tap_open(), from Girish Moodalbail. 9) Fix TX map failure path in igb and ixgbe, from Jean-Philippe Brucker and Alexander Duyck. 10) Fix DCB mode programming in stmmac driver, from Jose Abreu. 11) Fix err_count handling in various tunnels (ipip, ip6_gre). From Xin Long. 12) Properly align SKB head before building SKB in tuntap, from Jason Wang. 13) Avoid matching qdiscs with a zero handle during lookups, from Cong Wang. 14) Fix various endianness bugs in sctp, from Xin Long. 15) Fix tc filter callback races and add selftests which trigger the problem, from Cong Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (73 commits) selftests: Introduce a new test case to tc testsuite selftests: Introduce a new script to generate tc batch file net_sched: fix call_rcu() race on act_sample module removal net_sched: add rtnl assertion to tcf_exts_destroy() net_sched: use tcf_queue_work() in tcindex filter net_sched: use tcf_queue_work() in rsvp filter net_sched: use tcf_queue_work() in route filter net_sched: use tcf_queue_work() in u32 filter net_sched: use tcf_queue_work() in matchall filter net_sched: use tcf_queue_work() in fw filter net_sched: use tcf_queue_work() in flower filter net_sched: use tcf_queue_work() in flow filter net_sched: use tcf_queue_work() in cgroup filter net_sched: use tcf_queue_work() in bpf filter net_sched: use tcf_queue_work() in basic filter net_sched: introduce a workqueue for RCU callbacks of tc filter sctp: fix some type cast warnings introduced since very beginning sctp: fix a type cast warnings that causes a_rwnd gets the wrong value sctp: fix some type cast warnings introduced by transport rhashtable sctp: fix some type cast warnings introduced by stream reconf ... -
David S. Miller authored
Cong Wang says: ==================== net_sched: fix races with RCU callbacks Recently, the RCU callbacks used in TC filters and TC actions keep drawing my attention, they introduce at least 4 race condition bugs: 1. A simple one fixed by Daniel: commit c78e1746 Author: Daniel Borkmann <daniel@iogearbox.net> Date: Wed May 20 17:13:33 2015 +0200 net: sched: fix call_rcu() race on classifier module unloads 2. A very nasty one fixed by me: commit 1697c4bb Author: Cong Wang <xiyou.wangcong@gmail.com> Date: Mon Sep 11 16:33:32 2017 -0700 net_sched: carefully handle tcf_block_put() 3. Two more bugs found by Chris: https://patchwork.ozlabs.org/patch/826696/ https://patchwork.ozlabs.org/patch/826695/ Usually RCU callbacks are simple, however for TC filters and actions, they are complex because at least TC actions could be destroyed together with the TC filter in one callback. And RCU callbacks are invoked in BH context, without locking they are parallel too. All of these contribute to the cause of these nasty bugs. Alternatively, we could also: a) Introduce a spinlock to serialize these RCU callbacks. But as I said in commit 1697c4bb ("net_sched: carefully handle tcf_block_put()"), it is very hard to do because of tcf_chain_dump(). Potentially we need to do a lot of work to make it possible (if not impossible). b) Just get rid of these RCU callbacks, because they are not necessary at all, callers of these call_rcu() are all on slow paths and holding RTNL lock, so blocking is allowed in their contexts. However, David and Eric dislike adding synchronize_rcu() here. As suggested by Paul, we could defer the work to a workqueue and gain the permission of holding RTNL again without any performance impact, however, in tcf_block_put() we could have a deadlock when flushing workqueue while hodling RTNL lock, the trick here is to defer the work itself in workqueue and make it queued after all other works so that we keep the same ordering to avoid any use-after-free. Please see the first patch for details. Patch 1 introduces the infrastructure, patch 2~12 move each tc filter to the new tc filter workqueue, patch 13 adds an assertion to catch potential bugs like this, patch 14 closes another rcu callback race, patch 15 and patch 16 add new test cases. ==================== Reported-by:
Chris Mi <chrism@mellanox.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Pirko <jiri@resnulli.us> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Chris Mi authored
In this patchset, we fixed a tc bug. This patch adds the test case that reproduces the bug. To run this test case, user should specify an existing NIC device: # sudo ./tdc.py -d enp4s0f0 This test case belongs to category "flower". If user doesn't specify a NIC device, the test cases belong to "flower" will not be run. In this test case, we create 1M filters and all filters share the same action. When destroying all filters, kernel should not panic. It takes about 18s to run it. Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Acked-by:
Lucas Bates <lucasb@mojatatu.com> Signed-off-by:
-
Chris Mi authored
# ./tdc_batch.py -h usage: tdc_batch.py [-h] [-n NUMBER] [-o] [-s] [-p] device file TC batch file generator positional arguments: device device name file batch file name optional arguments: -h, --help show this help message and exit -n NUMBER, --number NUMBER how many lines in batch file -o, --skip_sw skip_sw (offload), by default skip_hw -s, --share_action all filters share the same action -p, --prio all filters have different prio Acked-by: -
Cong Wang authored
Similar to commit c78e1746 ("net: sched: fix call_rcu() race on classifier module unloads"), we need to wait for flying RCU callback tcf_sample_cleanup_rcu(). Cc: Yotam Gigi <yotamg@mellanox.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Pirko <jiri@resnulli.us> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
Cong Wang authored
After previous patches, it is now safe to claim that tcf_exts_destroy() is always called with RTNL lock. Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Pirko <jiri@resnulli.us> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
Cong Wang authored
Defer the tcf_exts_destroy() in RCU callback to tc filter workqueue and get RTNL lock. Reported-by:
-
Cong Wang authored
Defer the tcf_exts_destroy() in RCU callback to tc filter workqueue and get RTNL lock. Reported-by:
-
Cong Wang authored
Defer the tcf_exts_destroy() in RCU callback to tc filter workqueue and get RTNL lock. Reported-by:
-
Cong Wang authored
Defer the tcf_exts_destroy() in RCU callback to tc filter workqueue and get RTNL lock. Reported-by:
-
Cong Wang authored
Defer the tcf_exts_destroy() in RCU callback to tc filter workqueue and get RTNL lock. Reported-by:
-
Cong Wang authored
Defer the tcf_exts_destroy() in RCU callback to tc filter workqueue and get RTNL lock. Reported-by:
-
Cong Wang authored
Defer the tcf_exts_destroy() in RCU callback to tc filter workqueue and get RTNL lock. Reported-by:
-
Cong Wang authored
Defer the tcf_exts_destroy() in RCU callback to tc filter workqueue and get RTNL lock. Reported-by:
-
Cong Wang authored
Defer the tcf_exts_destroy() in RCU callback to tc filter workqueue and get RTNL lock. Reported-by:
-
Cong Wang authored
Defer the tcf_exts_destroy() in RCU callback to tc filter workqueue and get RTNL lock. Reported-by:
-
Cong Wang authored
Defer the tcf_exts_destroy() in RCU callback to tc filter workqueue and get RTNL lock. Reported-by:
-
Cong Wang authored
This patch introduces a dedicated workqueue for tc filters so that each tc filter's RCU callback could defer their action destroy work to this workqueue. The helper tcf_queue_work() is introduced for them to use. Because we hold RTNL lock when calling tcf_block_put(), we can not simply flush works inside it, therefore we have to defer it again to this workqueue and make sure all flying RCU callbacks have already queued their work before this one, in other words, to ensure this is the last one to execute to prevent any use-after-free. On the other hand, this makes tcf_block_put() ugly and harder to understand. Since David and Eric strongly dislike adding synchronize_rcu(), this is probably the only solution that could make everyone happy. Please also see the code comments below. Reported-by:
-
David S. Miller authored
Xin Long says: ==================== sctp: a bunch of fixes for some sparse warnings As Eric noticed, when running 'make C=2 M=net/sctp/', a plenty of warnings or errors checked by sparse appear. They are all problems about Endian and type cast. Most of them are just warnings by which no issues could be caused while some might be bugs. This patchset fixes them with four patches basically according to how they are introduced. ==================== Signed-off-by: -
Xin Long authored
These warnings were found by running 'make C=2 M=net/sctp/'. They are there since very beginning. Note after this patch, there still one warning left in sctp_outq_flush(): sctp_chunk_fail(chunk, SCTP_ERROR_INV_STRM) Since it has been moved to sctp_stream_outq_migrate on net-next, to avoid the extra job when merging net-next to net, I will post the fix for it after the merging is done. Reported-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Xin Long authored
These warnings were found by running 'make C=2 M=net/sctp/'. Commit d4d6fb57 ("sctp: Try not to change a_rwnd when faking a SACK from SHUTDOWN.") expected to use the peers old rwnd and add our flight size to the a_rwnd. But with the wrong Endian, it may not work as well as expected. So fix it by converting to the right value. Fixes: d4d6fb57 ("sctp: Try not to change a_rwnd when faking a SACK from SHUTDOWN.") Reported-by:
-
Xin Long authored
These warnings were found by running 'make C=2 M=net/sctp/'. They are introduced by not aware of Endian for the port when coding transport rhashtable patches. Fixes: 7fda702f ("sctp: use new rhlist interface on sctp transport rhashtable") Reported-by:
-
Xin Long authored
These warnings were found by running 'make C=2 M=net/sctp/'. They are introduced by not aware of Endian when coding stream reconf patches. Since commit c0d8bab6 ("sctp: add get and set sockopt for reconf_enable") enabled stream reconf feature for users, the Fixes tag below would use it. Fixes: c0d8bab6 ("sctp: add get and set sockopt for reconf_enable") Reported-by:
-
Cong Wang authored
Davide found the following script triggers a NULL pointer dereference: ip l a name eth0 type dummy tc q a dev eth0 parent :1 handle 1: htb This is because for a freshly created netdevice noop_qdisc is attached and when passing 'parent :1', kernel actually tries to match the major handle which is 0 and noop_qdisc has handle 0 so is matched by mistake. Commit 69012ae4 tries to fix a similar bug but still misses this case. Handle 0 is not a valid one, should be just skipped. In fact, kernel uses it as TC_H_UNSPEC. Fixes: 69012ae4 ("net: sched: fix handling of singleton qdiscs with qdisc_hash") Fixes: 59cc1f61 ("net: sched:convert qdisc linked list to hashtable") Reported-by:
Davide Caratti <dcaratti@redhat.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Eric Dumazet <edumazet@google.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Xin Long authored
Now when migrating sock to another one in sctp_sock_migrate(), it only resets owner sk for the data in receive queues, not the chunks on out queues. It would cause that data chunks length on the sock is not consistent with sk sk_wmem_alloc. When closing the sock or freeing these chunks, the old sk would never be freed, and the new sock may crash due to the overflow sk_wmem_alloc. syzbot found this issue with this series: r0 = socket$inet_sctp() sendto$inet(r0) listen(r0) accept4(r0) close(r0) Although listen() should have returned error when one TCP-style socket is in connecting (I may fix this one in another patch), it could also be reproduced by peeling off an assoc. This issue is there since very beginning. This patch is to reset owner sk for the chunks on out queues so that sk sk_wmem_alloc has correct value after accept one sock or peeloff an assoc to one sock. Note that when resetting owner sk for chunks on outqueue, it has to sctp_clear_owner_w/skb_orphan chunks before changing assoc->base.sk first and then sctp_set_owner_w them after changing assoc->base.sk, due to that sctp_wfree and it's callees are using assoc->base.sk. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
David S. Miller authored
John Fastabend says: ==================== net: sockmap fixes Last two fixes (as far as I know) for sockmap code this round. First, we are using the qdisc cb structure when making the data end calculation. This is really just wrong so, store it with the other metadata in the correct tcp_skb_cb sturct to avoid breaking things. Next, with recent work to attach multiple programs to a cgroup a specific enumeration of return codes was agreed upon. However, I wrote the sk_skb program types before seeing this work and used a different convention. Patch 2 in the series aligns the return codes to avoid breaking with this infrastructure and also aligns with other programming conventions to avoid being the odd duck out forcing programs to remember SK_SKB programs are different. Pusing to net because its a user visible change. With this SK_SKB program return codes are the same as other cgroup program types. ==================== Signed-off-by: -
John Fastabend authored
Recent additions to support multiple programs in cgroups impose a strict requirement, "all yes is yes, any no is no". To enforce this the infrastructure requires the 'no' return code, SK_DROP in this case, to be 0. To apply these rules to SK_SKB program types the sk_actions return codes need to be adjusted. This fix adds SK_PASS and makes 'SK_DROP = 0'. Finally, remove SK_ABORTED to remove any chance that the API may allow aborted program flows to be passed up the stack. This would be incorrect behavior and allow programs to break existing policies. Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
John Fastabend authored
SK_SKB program types use bpf_compute_data to store the end of the packet data. However, bpf_compute_data assumes the cb is stored in the qdisc layer format. But, for SK_SKB this is the wrong layer of the stack for this type. It happens to work (sort of!) because in most cases nothing happens to be overwritten today. This is very fragile and error prone. Fortunately, we have another hole in tcp_skb_cb we can use so lets put the data_end value there. Note, SK_SKB program types do not use data_meta, they are failed by sk_skb_is_valid_access(). Signed-off-by:
-
