- 16 Feb, 2009 5 commits
-
-
Patrick Ohly authored
The overlap with the old SO_TIMESTAMP[NS] options is handled so that time stamping in software (net_enable_timestamp()) is enabled when SO_TIMESTAMP[NS] and/or SO_TIMESTAMPING_RX_SOFTWARE is set. It's disabled if all of these are off. Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Patrick Ohly authored
The additional per-packet information (16 bytes for time stamps, 1 byte for flags) is stored for all packets in the skb_shared_info struct. This implementation detail is hidden from users of that information via skb_* accessor functions. A separate struct resp. union is used for the additional information so that it can be stored/copied easily outside of skb_shared_info. Compared to previous implementations (reusing the tstamp field depending on the context, optional additional structures) this is the simplest solution. It does not extend sk_buff itself. TX time stamping is implemented in software if the device driver doesn't support hardware time stamping. The new semantic for hardware/software time stamping around ndo_start_xmit() is based on two assumptions about existing network device drivers which don't support hardware time stamping and know nothing about it: - they leave the new skb_shared_tx unmodified - the keep the connection to the originating socket in skb->sk alive, i.e., don't call skb_orphan() Given that skb_shared_tx is new, the first assumption is safe. The second is only true for some drivers. As a result, software TX time stamping currently works with the bnx2 driver, but not with the unmodified igb driver (the two drivers this patch series was tested with). Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Patrick Ohly authored
User space can request hardware and/or software time stamping. Reporting of the result(s) via a new control message is enabled separately for each field in the message because some of the fields may require additional computation and thus cause overhead. User space can tell the different kinds of time stamps apart and choose what suits its needs. When a TX timestamp operation is requested, the TX skb will be cloned and the clone will be time stamped (in hardware or software) and added to the socket error queue of the skb, if the skb has a socket associated with it. The actual TX timestamp will reach userspace as a RX timestamp on the cloned packet. If timestamping is requested and no timestamping is done in the device driver (potentially this may use hardware timestamping), it will be done in software after the device's start_hard_xmit routine. Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Patrick Ohly authored
Mapping from a struct timecounter to a time returned by functions like ktime_get_real() is implemented. This is sufficient to use this code in a network device driver which wants to support hardware time stamping and transformation of hardware time stamps to system time. The interface could have been made more versatile by not depending on a time counter, but this wasn't done to avoid writing glue code elsewhere. The method implemented here is the one used and analyzed under the name "assisted PTP" in the LCI PTP paper: http://www.linuxclustersinstitute.org/conferences/archive/2008/PDF/Ohly_92221.pdfAcked-by: John Stultz <johnstul@us.ibm.com> Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Patrick Ohly authored
So far struct clocksource acted as the interface between time/timekeeping.c and hardware. This patch generalizes the concept so that a similar interface can also be used in other contexts. For that it introduces new structures and related functions *without* touching the existing struct clocksource. The reasons for adding these new structures to clocksource.[ch] are * the APIs are clearly related * struct clocksource could be cleaned up to use the new structs * avoids proliferation of files with similar names (timesource.h? timecounter.h?) As outlined in the discussion with John Stultz, this patch adds * struct cyclecounter: stateless API to hardware which counts clock cycles * struct timecounter: stateful utility code built on a cyclecounter which provides a nanosecond counter * only the function to read the nanosecond counter; deltas are used internally and not exposed to users of timecounter The code does no locking of the shared state. It must be called at least as often as the cycle counter wraps around to detect these wrap arounds. Both is the responsibility of the timecounter user. Acked-by: John Stultz <johnstul@us.ibm.com> Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 15 Feb, 2009 6 commits
-
-
dave graham authored
Single-thread access must be ensured for ICH8 NVM and PHY operations. This synchronization is provided by the nvm_mutex. To assist in understanding the contexts from which this code could be reached, a WARN was output if the mutex was not going to be immediately acquirable (if !mutex_trylock()). The code has now been optimized, and we have verified that the few remaining mutex contentions are reasonable and non-blocking, and it is time to remove the mutex_trylock() and WARN messages. Signed-off-by: dave graham <david.graham@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Conflicts: drivers/net/wireless/iwlwifi/iwl-agn.c drivers/net/wireless/iwlwifi/iwl3945-base.c
-
Harvey Harrison authored
Base versions handle constant folding now. For headers exposed to userspace, we must only expose the __ prefixed versions. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Harvey Harrison authored
Use cpu_to_le32 directly as it handles constant folding now, replace direct uses of __constant_cpu_to_{endian} as well. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
When forward-porting the tun accounting patch I managed to break the send path compltely by dropping the tun_get call. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 13 Feb, 2009 29 commits
-
-
Linus Torvalds authored
-
Luis R. Rodriguez authored
We need the udelay() for all families, including AR5416. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Luis R. Rodriguez authored
This is used for ASPM. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Reinette Chatre authored
The test to find out if we have FAT channels do not consider that the value of regulatory_bands for the 5000 series is larger than its eeprom size. Using the eeprom size is strange in itself. Use a new EEPROM_REGULATORY_BAND_NO_FAT to indicate no FAT support and test for that explicitly. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Acked-by: Samuel Ortiz <samuel.ortiz@intel.com> Tested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Tomas Winkler authored
This patch remove w/a used for development boards. These boards are not available thus no need to keep it inside driver Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Tomas Winkler authored
This patch replaces where possible usage of pci register defined in the driver by ones defined in pci_regs.h Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
It appears that you can completely mess up mac80211 in IBSS mode by sending it a disassoc or deauth: it'll stop queues and do a lot more but not ever do anything again. Fix this by not handling all those frames in IBSS mode, Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
The code beyond this point is supposed to be used for non-IBSS (managed) mode only. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
Just to make wext.c more self-contained. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
Remove all the code from mac80211 to keep track of BSSes and use the cfg80211-provided code completely. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
Add a more flexible BSS lookup function so that mac80211 or other drivers can actually use this for getting the BSS to connect to. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
This patch introduces cfg80211_unlink_bss, a function to allow a driver to remove a BSS from the internal list and make it not show up in scan results any more -- this is to be used when the driver detects that the BSS is no longer available. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
When cfg80211 users have their own allocated data in the per-BSS private data, they will need to free this when the BSS struct is destroyed. Add a free_priv method and fix one place where the BSS was kfree'd rather than released properly. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
There's no need to create a BSS struct only to pass it to ieee80211_sta_join_ibss, so refactor this function into __ieee80211_sta_join_ibss which takes all the relevant paramters, and ieee80211_sta_join_ibss which takes a BSS struct (used when joining an IBSS that already has other members). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
This patch adds basic scan capability to cfg80211/nl80211 and changes mac80211 to use it. The BSS list that cfg80211 maintains is made driver-accessible with a private area in each BSS struct, but mac80211 doesn't yet use it. That's another large project. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
Essentially consisting of passing the sta_info pointer around, instead of repeatedly doing hash lookups. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
Clean up the locking by splitting it into two functions, this will also enable further cleanups of stopping all sessions. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
The sta_info pointer can very well be passed to ieee80211_sta_tear_down_BA_sessions, this will later allow us to pass it through even further. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
As far as I can tell, there are possible lockups because both the RX session_timer and TX addba_resp_timer are del_timer_sync'ed under the sta spinlock which both timer functions take. Additionally, the TX agg code seems to leak memory when TX aggregation is not disabled before the sta_info is freed. Fix this by making the free code a little smarter in the RX agg case, and actually make the sta_info_destroy code free the TX agg info in the TX agg case. We won't notify the peer, but it'll notice something is wrong anyway, and normally this only happens after we've told it in some other way we will no longer talk to it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
When disabling TX aggregation because it was rejected or from the timer (it was not accepted), there is a window where we first set the state to operation, unlock, and then undo the whole thing. Avoid that by splitting up the stop function. Also get rid of the pointless sta_info indirection in the timer. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
Add documentation and move ieee80211_start_tx_ba_cb_irqsafe to right after ieee80211_start_tx_ba_cb. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
Doing so would be an MLME protocol violation when the peer disabled the aggregation session. Quick driver review indicates that there are error codes passed all over the drivers but cannot ever be nonzero except in error conditions that would indicate mac80211 bugs. No real changes here, since no drivers currently can return -EBUSY. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
We can only support aggregation on AP/STA right now. HT isn't defined for IBSS, WDS or MESH. In the WDS/MESH cases it's not clear what to put into the IBSS field, and we don't handle that in the code at all. Also fix the code to handle VLAN correctly. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
Create two new files, agg-tx.c and agg-rx.c to make it clearer which code is common (ht.c) and which is specific (agg-*.c). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
The values are in TUs (1.024ms), not ms. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
It's a little confusing to get the BSSID outside the function and pass it in, when it's only needed for this function, so change that. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
Hopefully the last required fix ... disable beaconing only on beaconing interfaces, and thus avoid calling ieee80211_if_config for purely virtual interfaces (those driver doesn't know about). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
We cannot currently hand off extra IEs to hw_scan, so reject configuring extra IEs for probe request frames when hw_scan is set. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-