- 11 Apr, 2016 40 commits
-
-
Takashi Iwai authored
commit 902eb7fd upstream. Just a minor code cleanup: unify the error paths. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Jiri Slaby <jslaby@suse.cz>
-
Takashi Iwai authored
commit 447d6275 upstream. Add some sanity check codes before actually accessing the endpoint via get_endpoint() in order to avoid the invalid access through a malformed USB descriptor. Mostly just checking bNumEndpoints, but in one place (snd_microii_spdif_default_get()), the validity of iface and altsetting index is checked as well. Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=971125Signed-off-by:
-
Takashi Iwai authored
commit 0f886ca1 upstream. create_fixed_stream_quirk() may cause a NULL-pointer dereference by accessing the non-existing endpoint when a USB device with a malformed USB descriptor is used. This patch avoids it simply by adding a sanity check of bNumEndpoints before the accesses. Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=971125Signed-off-by:
-
Josh Boyer authored
commit 9c6ba456 upstream. The powermate driver expects at least one valid USB endpoint in its probe function. If given malicious descriptors that specify 0 for the number of endpoints, it will crash. Validate the number of endpoints on the interface before using them. The full report for this issue can be found here: http://seclists.org/bugtraq/2016/Mar/85Reported-by:
Ralf Spenneberg <ralf@spenneberg.net> Signed-off-by:
Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Hans de Goede authored
commit 7445e45d upstream. SPC 880NC PC camera discussions: http://www.pclinuxos.com/forum/index.php/topic,135688.0.htmlReported-by:
Kikim <klucznik0@op.pl> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Bjørn Mork authored
commit d48d5691 upstream. Thomas reports: "Windows: 00 diagnostics 01 modem 02 at-port 03 nmea 04 nic Linux: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2001 ProdID=7e19 Rev=02.32 S: Manufacturer=Mobile Connect S: Product=Mobile Connect S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage" Reported-by:
Thomas Schäfer <tschaefer@t-online.de> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Josh Boyer authored
commit ea6db90e upstream. A Fedora user reports that the ftdi_sio driver works properly for the ICP DAS I-7561U device. Further, the user manual for these devices instructs users to load the driver and add the ids using the sysfs interface. Add support for these in the driver directly so that the devices work out of the box instead of needing manual configuration. Reported-by: <thesource@mail.ru> Signed-off-by:
-
Martyn Welch authored
commit cddc9434 upstream. The CP2105 is used in the GE Healthcare Remote Alarm Box, with the Manufacturer ID of 0x1901 and Product ID of 0x0194. Signed-off-by:
Martyn Welch <martyn.welch@collabora.co.uk> Signed-off-by:
-
Oliver Neukum authored
commit c55aee1b upstream. An attack using missing endpoints exists. CVE-2016-3137 Signed-off-by:
Oliver Neukum <ONeukum@suse.com> Signed-off-by:
-
Oliver Neukum authored
commit 5a07975a upstream. The driver can be crashed with devices that expose crafted descriptors with too few endpoints. See: http://seclists.org/bugtraq/2016/Mar/61Signed-off-by:
-
Oliver Neukum authored
commit 4e9a0b05 upstream. An attack using the lack of sanity checking in probe is known. This patch checks for the existence of a second port. CVE-2016-3136 Signed-off-by:
-
Oliver Neukum authored
commit 0b818e39 upstream. Attacks that trick drivers into passing a NULL pointer to usb_driver_claim_interface() using forged descriptors are known. This thwarts them by sanity checking. Signed-off-by:
-
Josh Boyer authored
commit 4ec0ef3a upstream. The iowarrior driver expects at least one valid endpoint. If given malicious descriptors that specify 0 for the number of endpoints, it will crash in the probe function. Ensure there is at least one endpoint on the interface before using it. The full report of this issue can be found here: http://seclists.org/bugtraq/2016/Mar/87Reported-by:
-
Oliver Neukum authored
commit 8835ba4a upstream. An attack has become available which pretends to be a quirky device circumventing normal sanity checks and crashes the kernel by an insufficient number of interfaces. This patch adds a check to the code path for quirky devices. Signed-off-by:
-
Oliver Neukum authored
commit 0d5ce778 upstream. A typo of j for i led to a logic bug. To rule out future confusion, the variable names are made meaningful. Signed-off-by:
-
Oliver Neukum authored
commit 264904cc upstream. Some devices I got show an inability to operate right after power on if they are already connected. They are beyond recovery if the descriptors are requested multiple times. So in case of a timeout we rather bail early and reset again. But it must be done only on the first loop lest we get into a reset/time out spiral that can be overcome with a retry. This patch is a rework of a patch that fell through the cracks. http://www.spinics.net/lists/linux-usb/msg103263.htmlSigned-off-by:
-
Maurizio Lombardi authored
commit 84bd6499 upstream. In beiscsi_setup_boot_info(), the boot_kset pointer should be set to NULL in case of failure otherwise an invalid pointer dereference may occur later. Signed-off-by:
Maurizio Lombardi <mlombard@redhat.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Jitendra Bhivare <jitendra.bhivare@broadcom.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Raghava Aditya Renukunta authored
commit f88fa79a upstream. aac_fib_map_free() calls pci_free_consistent() without checking that dev->hw_fib_va is not NULL and dev->max_fib_size is not zero.If they are indeed NULL/0, this will result in a hang as pci_free_consistent() will attempt to invalidate cache for the entire 64-bit address space (which would take a very long time). Fixed by adding a check to make sure that dev->hw_fib_va and dev->max_fib_size are not NULL and 0 respectively. Fixes: 9ad5204d - "[SCSI]aacraid: incorrect dma mapping mask during blinked recover or user initiated reset" Signed-off-by:
Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com> Reviewed-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
-
Douglas Gilbert authored
commit 5ecee0a3 upstream. One of the strange things that the original sg driver did was let the user provide both a data-out buffer (it followed the sg_header+cdb) _and_ specify a reply length greater than zero. What happened was that the user data-out buffer was copied into some kernel buffers and then the mid level was told a read type operation would take place with the data from the device overwriting the same kernel buffers. The user would then read those kernel buffers back into the user space. From what I can tell, the above action was broken by commit fad7f01e ("sg: set dxferp to NULL for READ with the older SG interface") in 2008 and syzkaller found that out recently. Make sure that a user space pointer is passed through when data follows the sg_header structure and command. Fix the abnormal case when a non-zero reply_len is also given. Fixes: fad7f01eSigned-off-by:
Douglas Gilbert <dgilbert@interlog.com> Reviewed-by:
Ewan Milne <emilne@redhat.com> Signed-off-by:
-
Andy Lutomirski authored
commit c29016cf upstream. iopl(3) is supposed to work if iopl is already 3, even if unprivileged. This didn't work right on Xen PV. Fix it. Reviewewd-by:
Jan Beulich <JBeulich@suse.com> Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/8ce12013e6e4c0a44a97e316be4a6faff31bd5ea.1458162709.git.luto@kernel.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Dave Jones authored
commit 7834c103 upstream. Since 4.4, I've been able to trigger this occasionally: =============================== [ INFO: suspicious RCU usage. ] 4.5.0-rc7-think+ #3 Not tainted Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/20160315012054.GA17765@codemonkey.org.ukSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Andi Kleen <ak@linux.intel.com> Fixes: 4787c368 "x86/tracing: Add irq_enter/exit() in smp_trace_reschedule_interrupt()" Signed-off-by:
Dave Jones <davej@codemonkey.org.uk> Signed-off-by:
-
Bjorn Helgaas authored
commit b84106b4 upstream. The PCI config header (first 64 bytes of each device's config space) is defined by the PCI spec so generic software can identify the device and manage its usage of I/O, memory, and IRQ resources. Some non-spec-compliant devices put registers other than BARs where the BARs should be. When the PCI core sizes these "BARs", the reads and writes it does may have unwanted side effects, and the "BAR" may appear to describe non-sensical address space. Add a flag bit to mark non-compliant devices so we don't touch their BARs. Turn off IO/MEM decoding to prevent the devices from consuming address space, since we can't read the BARs to find out what that address space would be. Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Tested-by:
-
Dan Carpenter authored
commit 6f3508f6 upstream. dct_sel_base_off is declared as a u64 but we're only using the lower 32 bits because of a shift wrapping bug. This can possibly truncate the upper 16 bits of DctSelBaseOffset[47:26], causing us to misdecode the CS row. Fixes: c8e518d5 ('amd64_edac: Sanitize f10_get_base_addr_offset') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20160120095451.GB19898@mwandaSigned-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Paolo Bonzini authored
commit 2849eb4f upstream. A guest executing an invalid invept instruction would hang because the instruction pointer was not updated. Fixes: bfd0a56bReviewed-by:
David Matlack <dmatlack@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Paolo Bonzini authored
commit e9ad4ec8 upstream. Moving the initialization earlier is needed in 4.6 because kvm_arch_init_vm is now using mmu_lock, causing lockdep to complain: [ 284.440294] INFO: trying to register non-static key. [ 284.445259] the code is fine but needs lockdep annotation. [ 284.450736] turning off the locking correctness validator. ... [ 284.528318] [<ffffffff810aecc3>] lock_acquire+0xd3/0x240 [ 284.533733] [<ffffffffa0305aa0>] ? kvm_page_track_register_notifier+0x20/0x60 [kvm] [ 284.541467] [<ffffffff81715581>] _raw_spin_lock+0x41/0x80 [ 284.546960] [<ffffffffa0305aa0>] ? kvm_page_track_register_notifier+0x20/0x60 [kvm] [ 284.554707] [<ffffffffa0305aa0>] kvm_page_track_register_notifier+0x20/0x60 [kvm] [ 284.562281] [<ffffffffa02ece70>] kvm_mmu_init_vm+0x20/0x30 [kvm] [ 284.568381] [<ffffffffa02dbf7a>] kvm_arch_init_vm+0x1ea/0x200 [kvm] [ 284.574740] [<ffffffffa02bff3f>] kvm_dev_ioctl+0xbf/0x4d0 [kvm] However, it also helps fixing a preexisting problem, which is why this patch is also good for stable kernels: kvm_create_vm was incrementing current->mm->mm_count but not decrementing it at the out_err label (in case kvm_init_mmu_notifier failed). The new initialization order makes it possible to add the required mmdrop without adding a new error label. Reported-by:
Borislav Petkov <bp@alien8.de> Signed-off-by:
-
Radim Krčmář authored
commit 7dd0fdff upstream. Discard policy uses ack_notifiers to prevent injection of PIT interrupts before EOI from the last one. This patch changes the policy to always try to deliver the interrupt, which makes a difference when its vector is in ISR. Old implementation would drop the interrupt, but proposed one injects to IRR, like real hardware would. The old policy breaks legacy NMI watchdogs, where PIT is used through virtual wire (LVT0): PIT never sends an interrupt before receiving EOI, thus a guest deadlock with disabled interrupts will stop NMIs. Note that NMI doesn't do EOI, so PIT also had to send a normal interrupt through IOAPIC. (KVM's PIT is deeply rotten and luckily not used much in modern systems.) Even though there is a chance of regressions, I think we can fix the LVT0 NMI bug without introducing a new tick policy. Reported-by:
Yuki Shibuya <shibuya.yk@ncos.nec.co.jp> Reviewed-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Andy Lutomirski authored
commit b7a58459 upstream. On Xen PV, regs->flags doesn't reliably reflect IOPL and the exit-to-userspace code doesn't change IOPL. We need to context switch it manually. I'm doing this without going through paravirt because this is specific to Xen PV. After the dust settles, we can merge this with the 32-bit code, tidy up the iopl syscall implementation, and remove the set_iopl pvop entirely. Fixes XSA-171. Reviewewd-by:
Kamal Mostafa <kamal@canonical.com> Signed-off-by:
-
Charles_Rose@Dell.com authored
commit c5967b79 upstream. This patch adds missing AHCI RAID SATA Device IDs for the Intel Sunrise Point PCH. Signed-off-by:
Nanda Kishore Chinna <nanda_kishore_chinna@dell.com> Signed-off-by:
Charles Rose <charles_rose@dell.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Benjamin Poirier authored
commit 1837b2e2 upstream. The current reserved_tailroom calculation fails to take hlen and tlen into account. skb: [__hlen__|__data____________|__tlen___|__extra__] ^ ^ head skb_end_offset In this representation, hlen + data + tlen is the size passed to alloc_skb. "extra" is the extra space made available in __alloc_skb because of rounding up by kmalloc. We can reorder the representation like so: [__hlen__|__data____________|__extra__|__tlen___] ^ ^ head skb_end_offset The maximum space available for ip headers and payload without fragmentation is min(mtu, data + extra). Therefore, reserved_tailroom = data + extra + tlen - min(mtu, data + extra) = skb_end_offset - hlen - min(mtu, skb_end_offset - hlen - tlen) = skb_tailroom - min(mtu, skb_tailroom - tlen) ; after skb_reserve(hlen) Compare the second line to the current expression: reserved_tailroom = skb_end_offset - min(mtu, skb_end_offset) and we can see that hlen and tlen are not taken into account. The min() in the third line can be expanded into: if mtu < skb_tailroom - tlen: reserved_tailroom = skb_tailroom - mtu else: reserved_tailroom = tlen Depending on hlen, tlen, mtu and the number of multicast address records, the current code may output skbs that have less tailroom than dev->needed_tailroom or it may output more skbs than needed because not all space available is used. Fixes: 4c672e4b ("ipv6: mld: fix add_grhead skb_over_panic for devs with large MTUs") Signed-off-by:
Benjamin Poirier <bpoirier@suse.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Daniel Borkmann authored
commit 4c672e4b upstream. It has been reported that generating an MLD listener report on devices with large MTUs (e.g. 9000) and a high number of IPv6 addresses can trigger a skb_over_panic(): skbuff: skb_over_panic: text:ffffffff80612a5d len:3776 put:20 head:ffff88046d751000 data:ffff88046d751010 tail:0xed0 end:0xec0 dev:port1 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:100! invalid opcode: 0000 [#1] SMP Modules linked in: ixgbe(O) CPU: 3 PID: 0 Comm: swapper/3 Tainted: G O 3.14.23+ #4 [...] Call Trace: <IRQ> [<ffffffff80578226>] ? skb_put+0x3a/0x3b [<ffffffff80612a5d>] ? add_grhead+0x45/0x8e [<ffffffff80612e3a>] ? add_grec+0x394/0x3d4 [<ffffffff80613222>] ? mld_ifc_timer_expire+0x195/0x20d [<ffffffff8061308d>] ? mld_dad_timer_expire+0x45/0x45 [<ffffffff80255b5d>] ? call_timer_fn.isra.29+0x12/0x68 [<ffffffff80255d16>] ? run_timer_softirq+0x163/0x182 [<ffffffff80250e6f>] ? __do_softirq+0xe0/0x21d [<ffffffff8025112b>] ? irq_exit+0x4e/0xd3 [<ffffffff802214bb>] ? smp_apic_timer_interrupt+0x3b/0x46 [<ffffffff8063f10a>] ? apic_timer_interrupt+0x6a/0x70 mld_newpack() skb allocations are usually requested with dev->mtu in size, since commit 72e09ad1 ("ipv6: avoid high order allocations") we have changed the limit in order to be less likely to fail. However, in MLD/IGMP code, we have some rather ugly AVAILABLE(skb) macros, which determine if we may end up doing an skb_put() for adding another record. To avoid possible fragmentation, we check the skb's tailroom as skb->dev->mtu - skb->len, which is a wrong assumption as the actual max allocation size can be much smaller. The IGMP case doesn't have this issue as commit 57e1ab6e ("igmp: refine skb allocations") stores the allocation size in the cb[]. Set a reserved_tailroom to make it fit into the MTU and use skb_availroom() helper instead. This also allows to get rid of igmp_skb_size(). Reported-by:
Wei Liu <lw1a2.jing@gmail.com> Fixes: 72e09ad1 ("ipv6: avoid high order allocations") Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: David L Stevens <david.stevens@oracle.com> Acked-by:
Eric Dumazet <edumazet@google.com> Acked-by:
-
Jiri Slaby authored
In 3.12 commit e16f5378 (net/ipv6: add sysctl option accept_ra_min_hop_limit), upstream commit 8013d1d7, we added DEVCONF_USE_OIF_ADDRS_ONLY and DEVCONF_ACCEPT_RA_MIN_HOP_LIMIT constants into <linux/ipv6.h>. But they have different values to upstream because some values were added in upstream and we did not backport them. So we have: DEVCONF_SUPPRESS_FRAG_NDISC, + DEVCONF_USE_OIF_ADDRS_ONLY, + DEVCONF_ACCEPT_RA_MIN_HOP_LIMIT, DEVCONF_MAX And upstream has: DEVCONF_SUPPRESS_FRAG_NDISC, + DEVCONF_ACCEPT_RA_FROM_LOCAL, + DEVCONF_USE_OPTIMISTIC, + DEVCONF_ACCEPT_RA_MTU, + DEVCONF_STABLE_SECRET, + DEVCONF_USE_OIF_ADDRS_ONLY, + DEVCONF_ACCEPT_RA_MIN_HOP_LIMIT, DEVCONF_MAX Now, our DEVCONF_USE_OIF_ADDRS_ONLY corresponds to DEVCONF_USE_OIF_ADDRS_ONLY-4 == DEVCONF_ACCEPT_RA_FROM_LOCAL from upstream. Similarly the other constant. Fix that by simply defining the missing constants to make the values equal. Signed-off-by:
YOSHIFUJI Hideaki <hideaki.yoshifuji@miraclelinux.com> Cc: Luis Henriques <luis.henriques@canonical.com> Cc: David S. Miller <davem@davemloft.net> Cc: Hangbin Liu <liuhangbin@gmail.com>
-
Jeff Layton authored
commit 5d05e54a upstream. Chuck pointed out a problem that crept in with commit 6ffa30d3 (nfs: don't call blocking operations while !TASK_RUNNING). Linux counts tasks in uninterruptible sleep against the load average, so this caused the system's load average to be pinned at at least 1 when there was a NFSv4.1+ mount active. Not a huge problem, but it's probably worth fixing before we get too many complaints about it. This patch converts the code back to use TASK_INTERRUPTIBLE sleep, simply has it flush any signals on each loop iteration. In practice no one should really be signalling this thread at all, so I think this is reasonably safe. With this change, there's also no need to game the hung task watchdog so we can also convert the schedule_timeout call back to a normal schedule. Reported-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
Jeff Layton <jeff.layton@primarydata.com> Tested-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Ian Mitchell authored
commit c0365c06 upstream. This patch allows the LPFC to start up without a fatal kernel bug based on an exceeded KMALLOC_MAX_SIZE and a too large NR_CPU-based maskbits field. The bug was based on the number of CPU cores in a system. Using the get_cpu_mask() function declared in kernel/cpu.c allows the driver to load on the community kernel 4.2 RC1. Below is the kernel bug reproduced: 8<-------------------------------------------------------------------- 2199382.828437 ( 0.005216)| lpfc 0003:02:00.0: enabling device (0140 -> 0142) 2199382.999272 ( 0.170835)| ------------[ cut here ]------------ 2199382.999337 ( 0.000065)| WARNING: CPU: 84 PID: 404 at mm/slab_common.c:653 kmalloc_slab+0x2f/0x89() 2199383.004534 ( 0.005197)| Modules linked in: lpfc(+) usbcore(+) mptctl scsi_transport_fc sg lpc_ich i2c_i801 usb_common tpm_tis mfd_core tpm acpi_cpufreq button scsi_dh_alua scsi_dh_rdacusbcore: registered new device driver usb 2199383.020568 ( 0.016034)| 2199383.020581 ( 0.000013)| scsi_dh_hp_sw scsi_dh_emc scsi_dh gru thermal sata_nv processor piix fan thermal_sysehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 2199383.035288 ( 0.014707)| 2199383.035306 ( 0.000018)| hwmon ata_piix 2199383.035336 ( 0.000030)| CPU: 84 PID: 404 Comm: kworker/84:0 Not tainted 3.18.0-rc2-gat-00106-ga7ca10f2-dirty #178 2199383.047077 ( 0.011741)| ehci-pci: EHCI PCI platform driver 2199383.047134 ( 0.000057)| Hardware name: SGI UV2000/ROMLEY, BIOS SGI UV 2000/3000 series BIOS 01/15/2013 2199383.056245 ( 0.009111)| Workqueue: events work_for_cpu_fn 2199383.066174 ( 0.009929)| 000000000000028d ffff88eef827bbe8 ffffffff815a542f 000000000000028d 2199383.069545 ( 0.003371)| ffffffff810ea142 ffff88eef827bc28 ffffffff8104365c ffff88eefe4006c8 2199383.076214 ( 0.006669)| 0000000000000000 00000000000080d0 0000000000000000 0000000000000004 2199383.079213 ( 0.002999)| Call Trace: 2199383.084084 ( 0.004871)| [<ffffffff815a542f>] dump_stack+0x49/0x62 2199383.087283 ( 0.003199)| [<ffffffff810ea142>] ? kmalloc_slab+0x2f/0x89 2199383.091415 ( 0.004132)| [<ffffffff8104365c>] warn_slowpath_common+0x77/0x92 2199383.095197 ( 0.003782)| [<ffffffff8104368c>] warn_slowpath_null+0x15/0x17 2199383.103336 ( 0.008139)| [<ffffffff810ea142>] kmalloc_slab+0x2f/0x89 2199383.107082 ( 0.003746)| [<ffffffff8110fd9e>] __kmalloc+0x13/0x16a 2199383.112531 ( 0.005449)| [<ffffffffa01a8ed9>] lpfc_pci_probe_one_s4+0x105b/0x1644 [lpfc] 2199383.115316 ( 0.002785)| [<ffffffff81302b92>] ? pci_bus_read_config_dword+0x75/0x87 2199383.123431 ( 0.008115)| [<ffffffffa01a951f>] lpfc_pci_probe_one+0x5d/0xcb5 [lpfc] 2199383.127364 ( 0.003933)| [<ffffffff81497119>] ? dbs_check_cpu+0x168/0x177 2199383.136438 ( 0.009074)| [<ffffffff81496fa5>] ? gov_queue_work+0xb4/0xc0 2199383.140407 ( 0.003969)| [<ffffffff8130b2a1>] local_pci_probe+0x1e/0x52 2199383.143105 ( 0.002698)| [<ffffffff81052c47>] work_for_cpu_fn+0x13/0x1b 2199383.147315 ( 0.004210)| [<ffffffff81054965>] process_one_work+0x222/0x35e 2199383.151379 ( 0.004064)| [<ffffffff81054e76>] worker_thread+0x3d5/0x46e 2199383.159402 ( 0.008023)| [<ffffffff81054aa1>] ? process_one_work+0x35e/0x35e 2199383.163097 ( 0.003695)| [<ffffffff810599c6>] kthread+0xc8/0xd2 2199383.167476 ( 0.004379)| [<ffffffff810598fe>] ? kthread_freezable_should_stop+0x5b/0x5b 2199383.176434 ( 0.008958)| [<ffffffff815a8cac>] ret_from_fork+0x7c/0xb0 2199383.180086 ( 0.003652)| [<ffffffff810598fe>] ? kthread_freezable_should_stop+0x5b/0x5b 2199383.192333 ( 0.012247)| ehci-pci 0000:00:1a.0: EHCI Host Controller -------------------------------------------------------------------->8 The proposed solution was approved by James Smart at Emulex and tested on a UV2 machine with 6144 cores. With the fix, the LPFC module loads with no unwanted effects on the system. Signed-off-by:
Ian Mitchell <imitchell@sgi.com> Signed-off-by:
Alex Thorlton <athorlton@sgi.com> Suggested-by:
Robert Elliot <elliott@hp.com> [james.smart: resolve unused variable warning] Signed-off-by:
James Smart <james.smart@avagotech.com> Signed-off-by:
James Bottomley <JBottomley@Odin.com> Signed-off-by:
-
Markus Metzger authored
commit a3ef2229 upstream. When using BTS on Core i7-4*, I get the below kernel warning. $ perf record -c 1 -e branches:u ls Message from syslogd@labpc1501 at Nov 11 15:49:25 ... kernel:[ 438.317893] Uhhuh. NMI received for unknown reason 31 on CPU 2. Message from syslogd@labpc1501 at Nov 11 15:49:25 ... kernel:[ 438.317920] Do you have a strange power saving mode enabled? Message from syslogd@labpc1501 at Nov 11 15:49:25 ... kernel:[ 438.317945] Dazed and confused, but trying to continue Make intel_pmu_handle_irq() take the full exit path when returning early. Cc: eranian@google.com Cc: peterz@infradead.org Cc: mingo@kernel.org Signed-off-by:
Markus Metzger <markus.t.metzger@intel.com> Signed-off-by:
Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1392425048-5309-1-git-send-email-andi@firstfloor.orgSigned-off-by:
-
Lukasz Odzioba authored
commit cc904f9c upstream. A new limit selected arbitrarily as power of two greater than required minimum for Xeon Phi processor (72 for Knights Landing). Currently driver is not able to handle cores with core ID greater than 32. Such attempt ends up with the following error in dmesg: coretemp coretemp.0: Adding Core XXX failed Signed-off-by:
Lukasz Odzioba <lukasz.odzioba@intel.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Martin Schwidefsky authored
commit 3446c13b upstream. The fork of a process with four page table levels is broken since git commit 6252d702 "[S390] dynamic page tables." All new mm contexts are created with three page table levels and an asce limit of 4TB. If the parent has four levels dup_mmap will add vmas to the new context which are outside of the asce limit. The subsequent call to copy_page_range will walk the three level page table structure of the new process with non-zero pgd and pud indexes. This leads to memory clobbers as the pgd_index *and* the pud_index is added to the mm->pgd pointer without a pgd_deref in between. The init_new_context() function is selecting the number of page table levels for a new context. The function is used by mm_init() which in turn is called by dup_mm() and mm_alloc(). These two are used by fork() and exec(). The init_new_context() function can distinguish the two cases by looking at mm->context.asce_limit, for fork() the mm struct has been copied and the number of page table levels may not change. For exec() the mm_alloc() function set the new mm structure to zero, in this case a three-level page table is created as the temporary stack space is located at STACK_TOP_MAX = 4TB. This fixes CVE-2016-2143. Reported-by:
Marcin Kościelnicki <koriakin@0x04.net> Reviewed-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Johan Hovold authored
commit cac9b50b upstream. Fix null-pointer dereference at probe should a (malicious) Treo device lack the expected endpoints. Specifically, the Treo port-setup hack was dereferencing the bulk-in and interrupt-in urbs without first making sure they had been allocated by core. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Wei Huang authored
commit dc9b2d93 upstream. Current KVM only supports RDMSR for K7_EVNTSEL0 and K7_PERFCTR0 MSRs. Reading the rest MSRs will trigger KVM to inject #GP into guest VM. This causes a warning message "Failed to access perfctr msr (MSR c0010001 is ffffffffffffffff)" on AMD host. This patch adds RDMSR support for all K7_EVNTSELn and K7_PERFCTRn registers and thus supresses the warning message. Signed-off-by:
Wei Huang <wehuang@redhat.com> Signed-off-by:
-
Dirk Brandewie authored
commit c2294a2f upstream. Ensure that no timer callback is running since we are about to free the timer structure. We cannot guarantee that the call back is called on the CPU where the timer is running. Reported-by:
Dirk Brandewie <dirk.j.brandewie@intel.com> Reviewed-by:
Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Alan Stern authored
commit e50293ef upstream. Commit 8520f380 ("USB: change hub initialization sleeps to delayed_work") changed the hub_activate() routine to make part of it run in a workqueue. However, the commit failed to take a reference to the usb_hub structure or to lock the hub interface while doing so. As a result, if a hub is plugged in and quickly unplugged before the work routine can run, the routine will try to access memory that has been deallocated. Or, if the hub is unplugged while the routine is running, the memory may be deallocated while it is in active use. This patch fixes the problem by taking a reference to the usb_hub at the start of hub_activate() and releasing it at the end (when the work is finished), and by locking the hub interface while the work routine is running. It also adds a check at the start of the routine to see if the hub has already been disconnected, in which nothing should be done. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Alexandru Cornea <alexandru.cornea@intel.com> Tested-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
