- 09 Jan, 2017 16 commits
-
-
Dmitry Shachnev authored
commit 217e2bfa upstream. In docutils 0.13, the return type of get_column_widths method of the Table directive has changed [1], which breaks our flat-table directive and leads to a TypeError when trying to build the docs [2]. This patch adds support for the new return type, while keeping support for older docutils versions too. [1] https://sourceforge.net/p/docutils/patches/120/ [2] https://sourceforge.net/p/docutils/bugs/303/Signed-off-by:
Dmitry Shachnev <mitya57@debian.org> Signed-off-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Krzysztof Kozlowski authored
commit f37fabb8 upstream. In the critical sysfs entry the thermal hwmon was returning wrong temperature to the user-space. It was reporting the temperature of the first trip point instead of the temperature of critical trip point. For example: /sys/class/hwmon/hwmon0/temp1_crit:50000 /sys/class/thermal/thermal_zone0/trip_point_0_temp:50000 /sys/class/thermal/thermal_zone0/trip_point_0_type:active /sys/class/thermal/thermal_zone0/trip_point_3_temp:120000 /sys/class/thermal/thermal_zone0/trip_point_3_type:critical Since commit e68b16ab ("thermal: add hwmon sysfs I/F") the driver have been registering a sysfs entry if get_crit_temp() callback was provided. However when accessed, it was calling get_trip_temp() instead of the get_crit_temp(). Fixes: e68b16ab ("thermal: add hwmon sysfs I/F") Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
Zhang Rui <rui.zhang@intel.com> Signed-off-by:
-
Boris Brezillon authored
commit 68af4fa8 upstream. bcm2835_pll_divider_off() is resetting the divider field in the A2W reg to zero when disabling the clock. Make sure we preserve this value by reading the previous a2w_reg value first and ORing the result with A2W_PLL_CHANNEL_DISABLE. Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Fixes: 41691b88 ("clk: bcm2835: Add support for programming the audio domain clocks") Reviewed-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Alexandre Courbot authored
commit 5e6b9a89 upstream. Add the VDD_GPU regulator (a GPIO-enabled PWM regulator) to the Jetson TX1 board. This addition allows the GPU to be used provided the bootloader properly enabled the GPU node. Signed-off-by:
Alexandre Courbot <acourbot@nvidia.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> [as pointed out by Thierry on IRC, nobody has reported a bug in the field, but using a new bootloader with a .dtb that has the incorrect data, it will crash on boot] Fixes: 336f79c7 ("arm64: tegra: Add NVIDIA Jetson TX1 Developer Kit support") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Lars-Peter Clausen authored
commit f4e81c52 upstream. The GPIO chardev is used for management tasks (allocating line and event handles) and does neither support read() nor write() operations. Hence it does not make much sense to allow seek operations. Currently the chardev uses noop_llseek() for its seek implementation. This function does not move the pointer and simply returns the current position (always 0 for the GPIO chardev). noop_llseek() is primarily meant for devices that can not support seek, but where there might be a user that depends on the seek() operation succeeding. For newly added devices that can not support seek operations it is recommended to use no_llseek(), which will return an error. For more information see commit 6038f373 ("llseek: automatically add .llseek fop"). Unfortunately this was overlooked when the GPIO chardev ABI was introduced. But it is highly unlikely that since then userspace applications have appeared that rely on being able to perform non-failing seek operations on a GPIO chardev file descriptor. So it should be safe to change from noop_llseel() to no_seek(). Also use nonseekable_open() in the chardev open() callback to clear the FMODE_SEEK, FMODE_PREAD and FMODE_PWRITE flags from the file. Neither of these should be set on a file that does not support seek operations. Fixes: 3c702e99 ("gpio: add a userspace chardev ABI for GPIOs") Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Thomas Gleixner authored
commit 9c164572 upstream. The clocksource delta to nanoseconds conversion is using signed math, but the delta is unsigned. This makes the conversion space smaller than necessary and in case of a multiplication overflow the conversion can become negative. The conversion is done with scaled math: s64 nsec_delta = ((s64)clkdelta * clk->mult) >> clk->shift; Shifting a signed integer right obvioulsy preserves the sign, which has interesting consequences: - Time jumps backwards - __iter_div_u64_rem() which is used in one of the calling code pathes will take forever to piecewise calculate the seconds/nanoseconds part. This has been reported by several people with different scenarios: David observed that when stopping a VM with a debugger: "It was essentially the stopped by debugger case. I forget exactly why, but the guest was being explicitly stopped from outside, it wasn't just scheduling lag. I think it was something in the vicinity of 10 minutes stopped." When lifting the stop the machine went dead. The stopped by debugger case is not really interesting, but nevertheless it would be a good thing not to die completely. But this was also observed on a live system by Liav: "When the OS is too overloaded, delta will get a high enough value for the msb of the sum delta * tkr->mult + tkr->xtime_nsec to be set, and so after the shift the nsec variable will gain a value similar to 0xffffffffff000000." Unfortunately this has been reintroduced recently with commit 6bd58f09 ("time: Add cycles to nanoseconds translation"). It had been fixed a year ago already in commit 35a4933a ("time: Avoid signed overflow in timekeeping_get_ns()"). Though it's not surprising that the issue has been reintroduced because the function itself and the whole call chain uses s64 for the result and the propagation of it. The change in this recent commit is subtle: s64 nsec; - nsec = (d * m + n) >> s: + nsec = d * m + n; + nsec >>= s; d being type of cycle_t adds another level of obfuscation. This wouldn't have happened if the previous change to unsigned computation would have made the 'nsec' variable u64 right away and a follow up patch had cleaned up the whole call chain. There have been patches submitted which basically did a revert of the above patch leaving everything else unchanged as signed. Back to square one. This spawned a admittedly pointless discussion about potential users which rely on the unsigned behaviour until someone pointed out that it had been fixed before. The changelogs of said patches added further confusion as they made finally false claims about the consequences for eventual users which expect signed results. Despite delta being cycle_t, aka. u64, it's very well possible to hand in a signed negative value and the signed computation will happily return the correct result. But nobody actually sat down and analyzed the code which was added as user after the propably unintended signed conversion. Though in sensitive code like this it's better to analyze it proper and make sure that nothing relies on this than hunting the subtle wreckage half a year later. After analyzing all call chains it stands that no caller can hand in a negative value (which actually would work due to the s64 cast) and rely on the signed math to do the right thing. Change the conversion function to unsigned math. The conversion of all call chains is done in a follow up patch. This solves the starvation issue, which was caused by the negative result, but it does not solve the underlying problem. It merily procrastinates it. When the timekeeper update is deferred long enough that the unsigned multiplication overflows, then time going backwards is observable again. It does neither solve the issue of clocksources with a small counter width which will wrap around possibly several times and cause random time stamps to be generated. But those are usually not found on systems used for virtualization, so this is likely a non issue. I took the liberty to claim authorship for this simply because analyzing all callsites and writing the changelog took substantially more time than just making the simple s/s64/u64/ change and ignore the rest. Fixes: 6bd58f09 ("time: Add cycles to nanoseconds translation") Reported-by:
David Gibson <david@gibson.dropbear.id.au> Reported-by:
Liav Rehana <liavr@mellanox.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Parit Bhargava <prarit@redhat.com> Cc: Laurent Vivier <lvivier@redhat.com> Cc: "Christopher S. Hall" <christopher.s.hall@intel.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/20161208204228.688545601@linutronix.deSigned-off-by:
-
Linus Walleij authored
commit 295070e9 upstream. The regulator has never been properly enabled, it has been dormant all the time. It's strange that MMC was working at all, but it likely worked by the signals going through the levelshifter and reaching the card anyways. Fixes: 3615a34e ("regulator: add STw481x VMMC driver") Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Adrian Hunter authored
commit 61e53bd0 upstream. Clearing the tuning bits should reset the tuning circuit. However there is more to do. Reset the command and data lines for good measure, and then for eMMC ensure the card is not still trying to process a tuning command by sending a stop command. Note the JEDEC eMMC specification says the stop command (CMD12) can be used to stop a tuning command (CMD21) whereas the SD specification is silent on the subject with respect to the SD tuning command (CMD19). Considering that CMD12 is not a valid SDIO command, the stop command is sent only when the tuning command is CMD21 i.e. for eMMC. That addresses cases seen so far which have been on eMMC. Note that this replaces the commit fe5fb2e3 ("mmc: sdhci: Reset cmd and data circuits after tuning failure") which is being reverted for v4.9+. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Tested-by:
Dan O'Donovan <dan@emutex.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Vittorio Gambaletta (VittGam) authored
commit 79e57dd1 upstream. The active_high LED of my Wistron DNMA-92 is still being recognized as active_low on 4.7.6 mainline. When I was preparing my former commit 0f9edcdd ("ath9k: Fix LED polarity for some Mini PCI AR9220 MB92 cards.") to fix that I must have somehow messed up with testing, because I tested the final version of that patch before sending it, and it was apparently working; but now it is not working on 4.7.6 mainline. I initially added the PCI_DEVICE_SUB section for 0x0029/0x2096 above the PCI_VDEVICE section for 0x0029; but then I moved the former below the latter after seeing how 0x002A sections were sorted in the file. This turned out to be wrong: if a generic PCI_VDEVICE entry (that has both subvendor and subdevice IDs set to PCI_ANY_ID) is put before a more specific one (PCI_DEVICE_SUB), then the generic PCI_VDEVICE entry will match first and will be used. With this patch, 0x0029/0x2096 has finally got active_high LED on 4.7.6. While I'm at it, let's fix 0x002A too by also moving its generic definition below its specific ones. Fixes: 0f9edcdd ("ath9k: Fix LED polarity for some Mini PCI AR9220 MB92 cards.") Signed-off-by:
Vittorio Gambaletta <linuxbugs@vittgam.net> [kvalo@qca.qualcomm.com: improve the commit log based on email discussions] Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
-
Matthias Schiffer authored
commit 91851cc7 upstream. Commit b2d70d49 ("ath9k: make GPIO API to support both of WMAC and SOC") refactored ath9k_hw_gpio_get() to support both WMAC and SOC GPIOs, changing the return on success from 1 to BIT(gpio). This broke some callers like ath_is_rfkill_set(). This doesn't fix any known bug in mainline at the moment, but should be fixed anyway. Instead of fixing all callers, change ath9k_hw_gpio_get() back to only return 0 or 1. Fixes: b2d70d49 ("ath9k: make GPIO API to support both of WMAC and SOC") Signed-off-by:
Matthias Schiffer <mschiffer@universe-factory.net> [kvalo@qca.qualcomm.com: mention that doesn't fix any known bug] Signed-off-by:
-
Johannes Berg authored
commit e6f462df upstream. When mac80211 abandons an association attempt, it may free all the data structures, but inform cfg80211 and userspace about it only by sending the deauth frame it received, in which case cfg80211 has no link to the BSS struct that was used and will not cfg80211_unhold_bss() it. Fix this by providing a way to inform cfg80211 of this with the BSS entry passed, so that it can clean up properly, and use this ability in the appropriate places in mac80211. This isn't ideal: some code is more or less duplicated and tracing is missing. However, it's a fairly small change and it's thus easier to backport - cleanups can come later. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Jes Sorensen authored
commit c59f13bb upstream. The H2C MEDIA_STATUS_RPT command for some reason causes 8192eu and 8723bu devices not being able to reconnect. Reported-by:
Barry Day <briselec@gmail.com> Signed-off-by:
Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Thomas Gleixner authored
commit 834fcd29 upstream. If the pmu registration fails the registered hotplug callbacks are not removed. Wrong in any case, but fatal in case of a modular driver. Replace the nonsensical state names with proper ones while at it. Fixes: 77c34ef1 ("perf/x86/intel/cstate: Convert Intel CSTATE to hotplug state machine") Signed-off-by:
-
Andi Kleen authored
commit b0c1ef52 upstream. An earlier patch allowed enabling PT and LBR at the same time on Goldmont. However it also allowed enabling BTS and LBR at the same time, which is still not supported. Fix this by bypassing the check only for PT. Signed-off-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Larry Finger authored
commit ba9f93f8 upstream. In commit a5ffbe0a ("rtlwifi: Fix scheduling while atomic bug") and commit a269913c ("rtlwifi: Rework rtl_lps_leave() and rtl_lps_enter() to use work queue"), an error was introduced in the power-save routines due to the fact that leaving PS was delayed by the use of a work queue. This problem is fixed by detecting if the enter or leave routines are in interrupt mode. If so, the workqueue is used to place the request. If in normal mode, the enter or leave routines are called directly. Fixes: a269913c ("rtlwifi: Rework rtl_lps_leave() and rtl_lps_enter() to use work queue") Reported-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Larry Finger authored
commit 8052d724 upstream. When there is a CRC error in the SPROM read from the device, the code attempts to handle a fallback SPROM. When this also fails, the driver returns zero rather than an error code. Signed-off-by:
-
- 06 Jan, 2017 24 commits
-
-
Greg Kroah-Hartman authored
-
Ming Lei authored
commit cebf8fd1 upstream. The global mutex of 'gdp_mutex' is used to serialize creating/querying glue dir and its cleanup. Turns out it isn't a perfect way because part(kobj_kset_leave()) of the actual cleanup action() is done inside the release handler of the glue dir kobject. That means gdp_mutex has to be held before releasing the last reference count of the glue dir kobject. This patch moves glue dir's cleanup after kobject_del() in device_del() for avoiding the race. Cc: Yijing Wang <wangyijing@huawei.com> Reported-by:
Chandra Sekhar Lingutla <clingutla@codeaurora.org> Signed-off-by:
Ming Lei <ming.lei@canonical.com> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 7c966435 as it is not working properly. Please move to 4.9 to get the full fix. Reported-by:
Pablo Neira Ayuso <pablo@netfilter.org> Cc: Florian Westphal <fw@strlen.de> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 870190a9 as it is not working properly. Please move to 4.9 to get the full fix. Reported-by:
-
AKASHI Takahiro authored
commit e7cd1903 upstream. Kdump(kexec-tools) parses /proc/iomem to identify all the memory regions on the system. Since the current kernel names "nomap" regions, like UEFI runtime services code/data, as "System RAM," kexec-tools sets up elf core header to include them in a crash dump file (/proc/vmcore). Then crash dump kernel parses UEFI memory map again, re-marks those regions as "nomap" and does not create a memory mapping for them unlike the other areas of System RAM. In this case, copying /proc/vmcore through copy_oldmem_page() on crash dump kernel will end up with a kernel abort, as reported in [1]. This patch names all the "nomap" regions explicitly as "reserved" so that we can exclude them from a crash dump file. acpi_os_ioremap() must also be modified because those regions have WB attributes [2]. Apart from kdump, this change also matches x86's use of acpi (and /proc/iomem). [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2016-August/448186.html [2] http://lists.infradead.org/pipermail/linux-arm-kernel/2016-August/450089.htmlReviewed-by:
Catalin Marinas <catalin.marinas@arm.com> Tested-by:
James Morse <james.morse@arm.com> Reviewed-by:
AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by:
Will Deacon <will.deacon@arm.com> Cc: Matthias Brugger <mbrugger@suse.com> Signed-off-by:
-
Eric Sandeen authored
commit 6b10b23c upstream. xlog_recover_clear_agi_bucket didn't set the type to XFS_BLFT_AGI_BUF, so we got a warning during log replay (or an ASSERT on a debug build). XFS (md0): Unknown buffer type 0! XFS (md0): _xfs_buf_ioapply: no ops on block 0xaea8802/0x1 Fix this, as was done in f19b872b for 2 other locations with the same problem. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Julien Grall authored
commit 24d5373d upstream. The function xen_guest_init is using __alloc_percpu with an alignment which are not power of two. However, the percpu allocator never supported alignments which are not power of two and has always behaved incorectly in thise case. Commit 3ca45a46 "percpu: ensure requested alignment is power of two" introduced a check which trigger a warning [1] when booting linux-next on Xen. But in reality this bug was always present. This can be fixed by replacing the call to __alloc_percpu with alloc_percpu. The latter will use an alignment which are a power of two. [1] [ 0.023921] illegal size (48) or align (48) for percpu allocation [ 0.024167] ------------[ cut here ]------------ [ 0.024344] WARNING: CPU: 0 PID: 1 at linux/mm/percpu.c:892 pcpu_alloc+0x88/0x6c0 [ 0.024584] Modules linked in: [ 0.024708] [ 0.024804] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.9.0-rc7-next-20161128 #473 [ 0.025012] Hardware name: Foundation-v8A (DT) [ 0.025162] task: ffff80003d870000 task.stack: ffff80003d844000 [ 0.025351] PC is at pcpu_alloc+0x88/0x6c0 [ 0.025490] LR is at pcpu_alloc+0x88/0x6c0 [ 0.025624] pc : [<ffff00000818e678>] lr : [<ffff00000818e678>] pstate: 60000045 [ 0.025830] sp : ffff80003d847cd0 [ 0.025946] x29: ffff80003d847cd0 x28: 0000000000000000 [ 0.026147] x27: 0000000000000000 x26: 0000000000000000 [ 0.026348] x25: 0000000000000000 x24: 0000000000000000 [ 0.026549] x23: 0000000000000000 x22: 00000000024000c0 [ 0.026752] x21: ffff000008e97000 x20: 0000000000000000 [ 0.026953] x19: 0000000000000030 x18: 0000000000000010 [ 0.027155] x17: 0000000000000a3f x16: 00000000deadbeef [ 0.027357] x15: 0000000000000006 x14: ffff000088f79c3f [ 0.027573] x13: ffff000008f79c4d x12: 0000000000000041 [ 0.027782] x11: 0000000000000006 x10: 0000000000000042 [ 0.027995] x9 : ffff80003d847a40 x8 : 6f697461636f6c6c [ 0.028208] x7 : 6120757063726570 x6 : ffff000008f79c84 [ 0.028419] x5 : 0000000000000005 x4 : 0000000000000000 [ 0.028628] x3 : 0000000000000000 x2 : 000000000000017f [ 0.028840] x1 : ffff80003d870000 x0 : 0000000000000035 [ 0.029056] [ 0.029152] ---[ end trace 0000000000000000 ]--- [ 0.029297] Call trace: [ 0.029403] Exception stack(0xffff80003d847b00 to 0xffff80003d847c30) [ 0.029621] 7b00: 0000000000000030 0001000000000000 ffff80003d847cd0 ffff00000818e678 [ 0.029901] 7b20: 0000000000000002 0000000000000004 ffff000008f7c060 0000000000000035 [ 0.030153] 7b40: ffff000008f79000 ffff000008c4cd88 ffff80003d847bf0 ffff000008101778 [ 0.030402] 7b60: 0000000000000030 0000000000000000 ffff000008e97000 00000000024000c0 [ 0.030647] 7b80: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 0.030895] 7ba0: 0000000000000035 ffff80003d870000 000000000000017f 0000000000000000 [ 0.031144] 7bc0: 0000000000000000 0000000000000005 ffff000008f79c84 6120757063726570 [ 0.031394] 7be0: 6f697461636f6c6c ffff80003d847a40 0000000000000042 0000000000000006 [ 0.031643] 7c00: 0000000000000041 ffff000008f79c4d ffff000088f79c3f 0000000000000006 [ 0.031877] 7c20: 00000000deadbeef 0000000000000a3f [ 0.032051] [<ffff00000818e678>] pcpu_alloc+0x88/0x6c0 [ 0.032229] [<ffff00000818ece8>] __alloc_percpu+0x18/0x20 [ 0.032409] [<ffff000008d9606c>] xen_guest_init+0x174/0x2f4 [ 0.032591] [<ffff0000080830f8>] do_one_initcall+0x38/0x130 [ 0.032783] [<ffff000008d90c34>] kernel_init_freeable+0xe0/0x248 [ 0.032995] [<ffff00000899a890>] kernel_init+0x10/0x100 [ 0.033172] [<ffff000008082ec0>] ret_from_fork+0x10/0x50 Reported-by:
Wei Chen <wei.chen@arm.com> Link: https://lkml.org/lkml/2016/11/28/669Signed-off-by:
Julien Grall <julien.grall@arm.com> Signed-off-by:
Stefano Stabellini <sstabellini@kernel.org> Reviewed-by:
-
Boris Ostrovsky authored
commit 30faaafd upstream. Commit 9c17d965 ("xen/gntdev: Grant maps should not be subject to NUMA balancing") set VM_IO flag to prevent grant maps from being subjected to NUMA balancing. It was discovered recently that this flag causes get_user_pages() to always fail with -EFAULT. check_vma_flags __get_user_pages __get_user_pages_locked __get_user_pages_unlocked get_user_pages_fast iov_iter_get_pages dio_refill_pages do_direct_IO do_blockdev_direct_IO do_blockdev_direct_IO ext4_direct_IO_read generic_file_read_iter aio_run_iocb (which can happen if guest's vdisk has direct-io-safe option). To avoid this let's use VM_MIXEDMAP flag instead --- it prevents NUMA balancing just as VM_IO does and has no effect on check_vma_flags(). Reported-by:
Olaf Hering <olaf@aepfle.de> Suggested-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
-
Jason Gunthorpe authored
commit 1f0f30e4 upstream. tpm_chip_unregister can only be called after tpm_chip_register. devm manages the allocation so no unwind is needed here. Fixes: afb5abc2 ("tpm: two-phase chip management functions") Reviewed-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by:
-
Douglas Anderson authored
commit 2d13bb64 upstream. We've got a delay loop waiting for secondary CPUs. That loop uses loops_per_jiffy. However, loops_per_jiffy doesn't actually mean how many tight loops make up a jiffy on all architectures. It is quite common to see things like this in the boot log: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000) In my case I was seeing lots of cases where other CPUs timed out entering the debugger only to print their stack crawls shortly after the kdb> prompt was written. Elsewhere in kgdb we already use udelay(), so that should be safe enough to use to implement our timeout. We'll delay 1 ms for 1000 times, which should give us a full second of delay (just like the old code wanted) but allow us to notice that we're done every 1 ms. [akpm@linux-foundation.org: simplifications, per Daniel] Link: http://lkml.kernel.org/r/1477091361-2039-1-git-send-email-dianders@chromium.orgSigned-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Daniel Thompson <daniel.thompson@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Brian Norris <briannorris@chromium.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Christian Lamparter authored
commit f06f35c6 upstream. This patch fixes a off-by-one in the "watchdog: qcom: add option for standalone watchdog not in timer block" patch that causes the following panic on boot: > Unhandled fault: external abort on non-linefetch (0x1008) at 0xc8874002 > pgd = c0204000 > [c8874002] *pgd=87806811, *pte=0b017653, *ppte=0b017453 > Internal error: : 1008 [#1] SMP ARM > CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.8.6 #0 > Hardware name: Generic DT based system > PC is at 0xc02222f4 > LR is at 0x1 > pc : [<c02222f4>] lr : [<00000001>] psr: 00000113 > sp : c782fc98 ip : 00000003 fp : 00000000 > r10: 00000004 r9 : c782e000 r8 : c04ab98c > r7 : 00000001 r6 : c8874002 r5 : c782fe00 r4 : 00000002 > r3 : 00000000 r2 : c782fe00 r1 : 00100000 r0 : c8874002 > Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none > Control: 10c5387d Table: 8020406a DAC: 00000051 > Process swapper/0 (pid: 1, stack limit = 0xc782e210) > Stack: (0xc782fc98 to 0xc7830000) > [...] The WDT_STS (status) needs to be translated via wdt_addr as well. fixes: f0d9d0f4 ("watchdog: qcom: add option for standalone watchdog not in timer block") Signed-off-by:
Christian Lamparter <chunkeey@gmail.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Alexander Usyskin authored
commit 9eff1140 upstream. Systemd on reboot enables shutdown watchdog that leaves the watchdog device open to ensure that even if power down process get stuck the platform reboots nonetheless. The iamt_wdt is an alarm-only watchdog and can't reboot system, but the FW will generate an alarm event reboot was completed in time, as the watchdog is not automatically disabled during power cycle. So we should request stop watchdog on reboot to eliminate wrong alarm from the FW. Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Reviewed-by:
-
Konstantin Khlebnikov authored
commit 4d1f0fb0 upstream. NMI handler doesn't call set_irq_regs(), it's set only by normal IRQ. Thus get_irq_regs() returns NULL or stale registers snapshot with IP/SP pointing to the code interrupted by IRQ which was interrupted by NMI. NULL isn't a problem: in this case watchdog calls dump_stack() and prints full stack trace including NMI. But if we're stuck in IRQ handler then NMI watchlog will print stack trace without IRQ part at all. This patch uses registers snapshot passed into NMI handler as arguments: these registers point exactly to the instruction interrupted by NMI. Fixes: 55537871 ("kernel/watchdog.c: perform all-CPU backtrace in case of hard lockup") Link: http://lkml.kernel.org/r/146771764784.86724.6006627197118544150.stgit@buzzSigned-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Ulrich Obergfell <uobergfe@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Signed-off-by:
-
Pavel Shilovsky authored
commit e3d240e9 upstream. If maxBuf is not 0 but less than a size of SMB2 lock structure we can end up with a memory corruption. Signed-off-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
-
Pavel Shilovsky authored
commit 4772c795 upstream. Acked-by:
Sachin Prabhu <sprabhu@redhat.com> Signed-off-by:
-
Pavel Shilovsky authored
commit 53e0e11e upstream. We can not unlock/lock cifs_tcp_ses_lock while walking through ses and tcon lists because it can corrupt list iterator pointers and a tcon structure can be released if we don't hold an extra reference. Fix it by moving a reconnect process to a separate delayed work and acquiring a reference to every tcon that needs to be reconnected. Also do not send an echo request on newly established connections. Signed-off-by:
-
Takashi Iwai authored
commit 2fc995a8 upstream. When ASoC Intel SST Medfield driver is probed but without codec / card assigned, it causes an Oops and freezes the kernel at suspend/resume, PM: Suspending system (freeze) Suspending console(s) (use no_console_suspend to debug) BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: [<ffffffffc09d9409>] sst_soc_prepare+0x19/0xa0 [snd_soc_sst_mfld_platform] Oops: 0000 [#1] PREEMPT SMP CPU: 0 PID: 1552 Comm: systemd-sleep Tainted: G W 4.9.0-rc6-1.g5f5c2ad-default #1 Call Trace: [<ffffffffb45318f9>] dpm_prepare+0x209/0x460 [<ffffffffb4531b61>] dpm_suspend_start+0x11/0x60 [<ffffffffb40d3cc2>] suspend_devices_and_enter+0xb2/0x710 [<ffffffffb40d462e>] pm_suspend+0x30e/0x390 [<ffffffffb40d2eba>] state_store+0x8a/0x90 [<ffffffffb43c670f>] kobj_attr_store+0xf/0x20 [<ffffffffb42b0d97>] sysfs_kf_write+0x37/0x40 [<ffffffffb42b02bc>] kernfs_fop_write+0x11c/0x1b0 [<ffffffffb422be68>] __vfs_write+0x28/0x140 [<ffffffffb43728a8>] ? apparmor_file_permission+0x18/0x20 [<ffffffffb433b2ab>] ? security_file_permission+0x3b/0xc0 [<ffffffffb422d095>] vfs_write+0xb5/0x1a0 [<ffffffffb422e3d6>] SyS_write+0x46/0xa0 [<ffffffffb4719fbb>] entry_SYSCALL_64_fastpath+0x1e/0xad Add proper NULL checks in the PM code of mdfld driver. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Acked-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Benjamin Marzinski authored
commit 314c25c5 upstream. In dm_sm_metadata_create() we temporarily change the dm_space_map operations from 'ops' (whose .destroy function deallocates the sm_metadata) to 'bootstrap_ops' (whose .destroy function doesn't). If dm_sm_metadata_create() fails in sm_ll_new_metadata() or sm_ll_extend(), it exits back to dm_tm_create_internal(), which calls dm_sm_destroy() with the intention of freeing the sm_metadata, but it doesn't (because the dm_space_map operations is still set to 'bootstrap_ops'). Fix this by setting the dm_space_map operations back to 'ops' if dm_sm_metadata_create() fails when it is set to 'bootstrap_ops'. Signed-off-by:
Benjamin Marzinski <bmarzins@redhat.com> Acked-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Heinz Mauelshagen authored
commit 11e29684 upstream. Commit ecbfb9f1 ("dm raid: add raid level takeover support") moved the configure_discard_support() call from raid_ctr() to raid_preresume(). Enabling/disabling discard _must_ happen during table load (through the .ctr hook). Fix this regression by moving the configure_discard_support() call back to raid_ctr(). Fixes: ecbfb9f1 ("dm raid: add raid level takeover support") Signed-off-by:
Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by:
-
Bart Van Assche authored
commit d15bb3a6 upstream. It is required to hold the queue lock when calling blk_run_queue_async() to avoid that a race between blk_run_queue_async() and blk_cleanup_queue() is triggered. Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by:
-
Ondrej Kozina authored
commit 265e9098 upstream. In crypt_set_key(), if a failure occurs while replacing the old key (e.g. tfm->setkey() fails) the key must not have DM_CRYPT_KEY_VALID flag set. Otherwise, the crypto layer would have an invalid key that still has DM_CRYPT_KEY_VALID flag set. Signed-off-by:
Ondrej Kozina <okozina@redhat.com> Reviewed-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
Wei Yongjun authored
commit bff7e067 upstream. Fix to return error code -EINVAL instead of 0, as is done elsewhere in this function. Fixes: e80d1c80 ("dm: do not override error code returned from dm_get_device()") Signed-off-by:
Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by:
-
Bart Van Assche authored
commit 301fc3f5 upstream. When dm_table_set_type() is used by a target to establish a DM table's type (e.g. DM_TYPE_MQ_REQUEST_BASED in the case of DM multipath) the DM core must go on to verify that the devices in the table are compatible with the established type. Fixes: e83068a5 ("dm mpath: add optional "queue_mode" feature") Signed-off-by:
-
Mike Snitzer authored
commit 6936c12c upstream. An earlier DM multipath table could have been build ontop of underlying devices that were all using blk-mq. In that case, if that active multipath table is replaced with an empty DM multipath table (that reflects all paths have failed) then it is important that the 'all_blk_mq' state of the active table is transfered to the new empty DM table. Otherwise dm-rq.c:dm_old_prep_tio() will incorrectly clone a request that isn't needed by the DM multipath target when it is to issue IO to an underlying blk-mq device. Fixes: e83068a5 ("dm mpath: add optional "queue_mode" feature") Reported-by:
-
