- 19 Mar, 2012 40 commits
-
-
Martin Hostettler authored
The MT9M032 is a parallel 1.6MP sensor from Micron controlled through I2C. The driver creates a V4L2 subdevice. It currently supports cropping, gain, exposure and v/h flipping controls in monochrome mode with an external pixel clock. [Lots of clean up, fixes and enhancements] Signed-off-by:
Martin Hostettler <martin@neutronstar.dyndns.org> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by:
Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Laurent Pinchart authored
Compute the PLL parameters at runtime using the generic Aptina PLL helper. Signed-off-by:
-
Laurent Pinchart authored
Add a generic helper function to compute PLL parameters for PLL found in several Aptina sensors. Signed-off-by:
-
Laurent Pinchart authored
The fields are set but never used, remove them. Signed-off-by:
-
Akihiro Tsukada authored
PT1 and PT2 do not have net functions. Signed-off-by:
Akihiro Tsukada <tskd2@yahoo.co.jp> Signed-off-by:
-
Akihiro Tsukada authored
Current default value of "nr_tables" option corresponds to the DMA buffer of about 10 to 48 seconds long, which is obviously too much. Signed-off-by:
-
Akihiro Tsukada authored
This patch adds a data integrity check using the sequence counter and error flags added by the bridge chip. Signed-off-by:
-
Akihiro Tsukada authored
The driver started a kthread to poll the DMA buffers soon after probing, which relsuleted in 1000/sec sleeps and wakeups of the thread doing nothing useful until someone started feeding. This patch changes the creation and destruction of the kthread depending on the number of users. Signed-off-by:
-
Ezequiel García authored
These arrays were embedded in the struct itself, but they weren't used by anyone, since urbs are now dinamically allocated at em28xx_usb_isoc_ctl struct. Tested by compilation only. Signed-off-by:
Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by:
-
Dan Carpenter authored
There are couple places where we check unsigned values for negative. I changed ->gpin_nr to signed because in gpio_ir_recv_probe() we do: if (pdata->gpio_nr < 0) return -EINVAL; I also change gval to a signed int in gpio_ir_recv_irq() because that's the type that gpio_get_value_cansleep() returns and we test for negative returns. Signed-off-by:Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Trilok Soni <tsoni@codeaurora.org> Signed-off-by:
-
Andrew Miller authored
Replaced spaces with tabs Signed-off-by:
Andrew Miller <amiller@amilx.com> Signed-off-by:
-
Sylwester Nawrocki authored
Fix following compilation error when CONFIG_PM_SLEEP is disabled: CC drivers/media/video/s5p-fimc/mipi-csis.o drivers/media/video/s5p-fimc/mipi-csis.c: In function ‘s5pcsis_remove’: drivers/media/video/s5p-fimc/mipi-csis.c:956: error: implicit declaration of function ‘s5pcsis_suspend’ Reported-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
drivers/media/video/w9966.c: In function ‘__check_pardev’: drivers/media/video/w9966.c:136:1: warning: return from incompatible pointer type [enabled by default] Signed-off-by: -
Fabio Estevam authored
Fix the following build error: LD .tmp_vmlinux1 drivers/built-in.o: In function `mx2_camera_init_videobuf': clkdev.c:(.text+0xcfaf4): undefined reference to `vb2_dma_contig_memops' drivers/built-in.o: In function `mx2_camera_probe': clkdev.c:(.devinit.text+0x5734): undefined reference to `vb2_dma_contig_init_ctx' clkdev.c:(.devinit.text+0x5778): undefined reference to `vb2_dma_contig_cleanup_ctx' drivers/built-in.o: In function `mx2_camera_remove': clkdev.c:(.devexit.text+0x89c): undefined reference to `vb2_dma_contig_cleanup_ctx' commit c6a41e32 ([media] media i.MX27 camera: migrate driver to videobuf2) missed to select VIDEOBUF2_DMA_CONTIG in Kconfig. Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
-
Sylwester Nawrocki authored
Make the VIDIOC_G/S_SELECTION ioctls documentation more consistent with the rest of media Docbook, use capital letters where necessary and correct few minor errors. Signed-off-by:
-
Malcolm Priestley authored
Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Scott Jiang authored
This is a v4l2 bridge driver for Blackfin video capture device, support ppi and eppi interface. Signed-off-by:
Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by:
-
Scott Jiang authored
This is a v4l2 sensor-level driver for the ST VS6624 camera. Signed-off-by:
-
Scott Jiang authored
This driver is a v4l2 subdevice driver to support Analog Devices ADV7183 SDTV video decoder. Signed-off-by:
-
Malcolm Priestley authored
Signed-off-by:
-
Malcolm Priestley authored
Support for m88rs2000 module. The driver also attempts to overcome occasional lock problems. Call backs are now used for read_status, signal level and SNR. Signed-off-by:
-
Mauro Carvalho Chehab authored
This field is handled internally by the DVB core, with uses the selected delivery system to fill it, when a DVBv3 call is handled. So, drivers should not touch on it. Cc: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: -
Malcolm Priestley authored
Support for m88rs2000 chip used in lmedm04 driver. Note there are still lock problems. Slow channel change due to the large block of registers sent in set_frontend. Version 2 differences. Front end is completely shut down when in sleep mode. This allow user to regain control of device. Kaffeine scan problem solved by removing register calls from get_frontend. Kaffeine seems to call get_frontend when updating signal data. This can happen in the middle of a tune stalling the driver. Change calculations to those in the DS3000 driver. Signed-off-by:
-
Malcolm Priestley authored
These were in the original lme2510 device driver. Removing them significantly speeds up the driver. All tuners tested. Signed-off-by:
-
Santosh Nayak authored
In CDRXD(), Negative number is assigned to unsigned variable 'state->noise_cal.tdCal2. Members of 'SNoiseCal' should be 'signed short'. Signed-off-by:
Santosh Nayak <santoshprasadnayak@gmail.com> Signed-off-by:
-
Alexey Khoroshilov authored
DibAcquireLock() is implemented as mutex_lock_interruptible() but the driver does not handle unsuccessful locking. As a result it may lead to unlock of an unheld mutex. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
Alexey Khoroshilov authored
There are several error paths, where &state->platform.risc.mem_mbx_lock is not unlocked. The patch fixes it. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
-
Justin P. Mattock authored
linux-next: I like to spend some time reading code, in doing so I have found some typos in some of the comments. Signed-off-by:
Justin P. Mattock <justinmattock@gmail.com> Signed-off-by:
-
Gianluca Gennari authored
Ryley and me tested several eLNA configuration values with both a rooftop and a portable antenna. Ryley fuond out that the best value for his Elgato stick is indeed the current default value 0xC0. Instead, my stick is not capable of tuning VHF channels with 0xC0. With 0x80, VHF works but the tuner sensitivity with the portable antenna is poor. Instead, the value 0xA0 works with VHF and also gives good performance with both the rooftop and the portable antenna. So we concluded that devices built on the reference design work best with 0xA0, while custom designs (Elgato, PCTV) seem to require 0xC0. I also removed the unused parameter "minor" in struct as102_dev_t. Signed-off-by:
Gianluca Gennari <gennarone@gmail.com> Signed-off-by:
Ryley Angus <rangus@student.unimelb.edu.au> Signed-off-by:
-
Gianluca Gennari authored
This patch fixes a regression in kernel 3.3 due to this patch: http://patchwork.linuxtv.org/patch/8332/ That patch changes "#pragma pack(1)" with "__packed" attributes, but it is not complete. In fact, in the as102 driver there are a lot of structs/unions defined inside other structs/unions. When the "__packed" attribute is applied only on the external struct, it will not affect the internal struct definitions. So the regression is fixed by specifiying the "__packed" attribute also on the internal structs. This patch should go into 3.3, as it fixes a regression introduced in the new kernel version. Signed-off-by:
-
Jose Alberto Reguero authored
This patch add CI support to az6007 driver. Signed-off-by:
Jose Alberto Reguero <jareguero@telefonica.net> Signed-off-by:
-
Jesper Juhl authored
In cx231xx_v4l2_close() there are two calls to cx231xx_release_resources(dev) followed by kfree(dev). That is a problem since cx231xx_release_resources() already kfree()'s its argument, so we end up doing a double free. Easily resolved by just removing the redundant kfree() calls after the calls to cx231xx_release_resources(). I also changed the 'dev = NULL' assignments (which are rather pointless since 'dev' is about to go out of scope), to 'fh->dev = NULL' since it looks to me that that is what was actually intended. And I removed the 'dev = NULL' assignment at the end of cx231xx_release_resources() since it is pointless. Signed-off-by:
Jesper Juhl <jj@chaosbits.net> Signed-off-by:
-
Malcolm Priestley authored
Remove delays added for STV0288 frontend. This patch significantly speeds up channel change and scan. It requires patch 10161-STV0288 increase delay between carrier search. Signed-off-by:
-
Malcolm Priestley authored
The current delay of 30uS is too short to recover any carrier. In the lmedm04 driver delays were added to overcome carrier lock problems. The typical delay was 30mS (2 x 15ms register write 0x2c and read 0x24). Other drivers that use STV0288 don't appear to have any delay are likely to have also suffered this problem. Signed-off-by:
-
Andrew Morton authored
There's no known problem here, but this is one of only two non-arch files in the kernel which use asm/atomic.h instead of linux/atomic.h. Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Acked-by:
-
Laurent Pinchart authored
The camera requires the PROBE_DEF quirk. Add a corresponding entry in the device IDs list. Signed-off-by:
-
Javier Martin authored
Userptr can be very useful if a UVC camera is requested to use video buffers allocated by another processing device. So that buffers don't need to be copied. Signed-off-by:
Javier Martin <javier.martin@vista-silicon.com> Acked-by:
-
Laurent Pinchart authored
Support 32-bit/64-bit compatibility for the the UVCIOC_ ioctls. Signed-off-by:
-
Laurent Pinchart authored
-EINVAL is the wrong error code in that case, replace it with -ENOTTY. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Laurent Pinchart authored
Drivers implementing custom ioctls need to handle 32-bit/64-bit compatibility themselves. Provide them with a way to do so. To avoid circular module dependencies, merge the v4l2-compat-ioctl32 module into videodev. There is no point in keeping them separate, as the v4l2_compat_ioctl32() function is required by videodev if CONFIG_COMPAT is set anyway. Signed-off-by:
-
