- 28 Aug, 2017 1 commit
-
-
Janani Sankara Babu authored
This patch solves the following warning shown by the checkpatch script WARNING: Comparisons should place the constants on the right side of the test Signed-off-by:
Janani Sankara Babu <jananis37@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 27 Aug, 2017 3 commits
-
-
Himanshu Jha authored
Kfree on NULL pointer is a no-op and therefore checking is redundant. Signed-off-by:
Himanshu Jha <himanshujha199640@gmail.com> Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Himanshu Jha authored
call to memset to assign 0 value immediately after allocating memory with kzalloc is unnecesaary as kzalloc allocates the memory filled with 0 value. Build and tested it. Signed-off-by:
-
Alex Briskin authored
Register with module_driver macro instead of module_init/module_exit. Signed-off-by:
Alex Briskin <br.shurik@gmail.com> Signed-off-by:
-
- 23 Aug, 2017 36 commits
-
-
Arnd Bergmann authored
Like the version in drivers/net/wireless, this driver requires the MAC80211 framework, otherwise we run into a link error: ERROR: "ieee80211_rx_irqsafe" [drivers/staging/rtlwifi/r8822be.ko] undefined! ERROR: "cfg80211_unlink_bss" [drivers/staging/rtlwifi/r8822be.ko] undefined! ERROR: "ieee80211_beacon_get_tim" [drivers/staging/rtlwifi/r8822be.ko] undefined! ERROR: "ieee80211_resume_disconnect" [drivers/staging/rtlwifi/r8822be.ko] undefined! This adds the Kconfig dependency for it. Fixes: 56bde846 ("staging: r8822be: Add existing rtlwifi and rtl_pci parts for new driver") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
gcc notices a very complicated way to check a value for being equal to one, and warns about it: drivers/staging/rtlwifi/btcoexist/halbtc8822b1ant.c: In function 'halbtc8822b1ant_set_ext_ant_switch': drivers/staging/rtlwifi/btcoexist/halbtc8822b1ant.c:2105:9: error: '~' on a boolean expression [-Werror=bool-operation] ~switch_polatiry_inverse : ^ drivers/staging/rtlwifi/btcoexist/halbtc8822b1ant.c:2105:9: note: did you mean to use logical not? ~switch_polatiry_inverse : ^ This simplifies this expression to make it more readable and to make gcc happy. Fixes: 56bde846 ("staging: r8822be: Add existing rtlwifi and rtl_pci parts for new driver") Signed-off-by: -
Arnd Bergmann authored
This function contains a series of interdependent conditions, slightly more than gcc can follow handle apparently: drivers/staging/rtlwifi/base.c: In function 'rtl_check_beacon_key': drivers/staging/rtlwifi/base.c:2546:34: error: 'ht_cap_ie' may be used uninitialized in this function [-Werror=maybe-uninitialized] This moves the code around a bit, to simplify the conditions enough that gcc can see that all variables are correctly initialized. Fixes: 56bde846 ("staging: r8822be: Add existing rtlwifi and rtl_pci parts for new driver") Signed-off-by:
-
Bryan Garza authored
Changed dev_err() call to use function name constant instead of hardcoded string. Issue found by checkpatch. Signed-off-by:
Bryan Garza <bry@riseup.net> Signed-off-by:
-
Gilad Ben-Yossef authored
The crypto API requires saving the last blocks of ciphertext in req->info for use as IV for CTS mode. The ccree driver was not doing this. This patch fixes that. The bug was manifested with cts(cbc(aes)) mode in tcrypt tests. Fixes: 302ef8eb ("Add CryptoCell skcipher support") Signed-off-by:
Gilad Ben-Yossef <gilad@benyossef.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Laurentiu Tudor authored
Throughout the driver we use == 0 / != 0 to check strcmp() returns except this place, so fix it. Signed-off-by:
Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by:
-
James Simmons authored
Rationalize include paths in all the lnet header files. Signed-off-by:
James Simmons <jsimmons@infradead.org> Signed-off-by:
-
James Simmons authored
Rationalize include paths in all the libcfs header files. Signed-off-by:
-
James Simmons authored
Rationalize include paths in the libcfs source code files. Signed-off-by:
-
James Simmons authored
Rationalize include paths in the ksocklnd source code files. Signed-off-by:
-
James Simmons authored
Rationalize include paths in the ko2iblnd source code files. Signed-off-by:
-
James Simmons authored
Rationalize include paths in the lnet core source code files. Signed-off-by:
-
James Simmons authored
Rationalize include paths in the lnet selftest source code files. Signed-off-by:
-
James Simmons authored
Rationalize include paths for the lustre uapi headers Signed-off-by:
-
James Simmons authored
Rationalize include paths for the lustre internal headers Signed-off-by:
-
James Simmons authored
Rationalize include paths in the osc source code files. Signed-off-by:
-
James Simmons authored
Rationalize include paths in the obdecho source code files. Signed-off-by:
-
James Simmons authored
Rationalize include paths in the obdclass source code files. Signed-off-by:
-
James Simmons authored
Rationalize include paths in the mgc source code files. Signed-off-by:
-
James Simmons authored
Rationalize include paths in the mdc source code files. Signed-off-by:
-
James Simmons authored
Rationalize include paths in the lov source code files. Signed-off-by:
-
James Simmons authored
Rationalize include paths in the lmv source code files. Signed-off-by:
-
James Simmons authored
Rationalize include paths in the llite source code files. Signed-off-by:
-
James Simmons authored
Rationalize include paths in the ptlrpc/ldlm source code files. Signed-off-by:
-
James Simmons authored
Rationalize include paths in the fld source code files. Signed-off-by:
-
James Simmons authored
Start to rationalize include paths in the fid source code files. Signed-off-by:
-
James Simmons authored
The BIT macro is not available for UAPI headers so remove it from the lustre UAPI headers. Signed-off-by:
-
James Simmons authored
In order for lustre_idl.h to be usable for both user land and kernel space it has to use the proper byteorder functions. Signed-off-by:
James Simmons <uja.ornl@yahoo.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6245 Reviewed-on: http://review.whamcloud.com/16916Reviewed-by:
Frank Zago <fzago@cray.com> Reviewed-by:
Dmitry Eremin <dmitry.eremin@intel.com> Reviewed-by:
Oleg Drokin <oleg.drokin@intel.com> Reviewed-by:
John L. Hammond <john.hammond@intel.com> Signed-off-by:
-
James Simmons authored
Now that lustre_ioctl.h is a UAPI header the kernel configuration option CONFIG_LUSTRE_OBD_MAX_IOCTL needs to be remove. The user land utilites will no longer be able to see this option and actually they never used this option before. Since this is the case setting the kernel configuration to something other than 8K could actually break things. The best option is just hard code it to 8K. Signed-off-by:
Quentin Bouget <quentin.bouget@cea.fr> Reviewed-by:
Ben Evans <bevans@cray.com> Reviewed-by:
-
James Simmons authored
Move all the remaining lustre headers shared between user land and kernel space to the uapi directory. Signed-off-by:
-
James Simmons authored
These are the last UAPI headers that contain libcfs.h which is internal kernel header. Since it is not available to user land remove libcfs.h and add the need headers that libcfs.h provided. Signed-off-by:
Jinshan Xiong <jinshan.xiong@intel.com> Reviewed-by:
Fan Yong <fan.yong@intel.com> Reviewed-by:
-
James Simmons authored
Now that lnetctl.h is a UAPI header the BIT macro has to be removed. Signed-off-by:
-
James Simmons authored
Several function prototypes of the form jt_ptl_* are only needed by userland so they can be removed. Signed-off-by:
Bob Glossman <bob.glossman@intel.com> Reviewed-by:
-
James Simmons authored
Move all the included headers in libcfs.h to the top of the file. Signed-off-by:
Olaf Weber <olaf.weber@hpe.com> Reviewed-by:
-
James Simmons authored
Migrate the headers used by user land and kernel space to the libcfs/lnet uapi directory. Signed-off-by:
-
James Simmons authored
The header lnet.h is just a bunch of headers included in a header. Just delete it and include the appropriate headers where needed. Signed-off-by:
-
