- 05 Jan, 2014 29 commits
-
-
Mitch Williams authored
When cleaning the ARQ, we must reinitialize the buffer size each time we go through the loop, because i40e_clean_arq_element returns the message length in the same field. Without this change, subsequent messages can be truncated to the length of the previous message. Change-Id: Ic9c32ff843faf0fc3196d21351a1c3a60c6158eb Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
Kavindya Deegala <kavindya.s.deegala@intel.com> Tested-by:
Sibai Li <sibai.li@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Mitch Williams authored
Introduce i40e_irq_dynamic_disable_icr0 and use it and its previously- extant counterpart when appropriate. Change-Id: Ieb4037874fba2e96fc2354b34a97a3cb8f6490f3 Signed-off-by:
-
Vasu Dev authored
Add an include header guard to guard against multiple includes Change-Id: I73efa03efc912d2047edab903c7caed05b444da2 Signed-off-by:
Vasu Dev <vasu.dev@intel.com> Signed-off-by:
-
Mitch Williams authored
When disabling and enabling VFs on a live system with the VF driver loaded, it's possible to receive an admin queue message from the VF driver at an inconvenient time, e.g. when the associated data structures aren't present or configured. This causes a rather inconvenient panic. To guard against this, we change the order of when we set num_alloc_vfs when turning off SR-IOV, and then gate processing of any VF messages based upon that value. Likewise, when enabling VFs, we shut off the relevant interrupt until configuration is complete. Change-Id: I0c172c056616c2bebd78bbc807ab446eb484deea Signed-off-by:
-
Jesse Brandeburg authored
replace __constant_htons with htons Change-Id: I123a5318bae34c8b004c71db07c56f137c685849 Signed-off-by:
-
Anjali Singhai Jain authored
Earlier we were reading Shadow RAM (copy of the NVM) which can differ from the actual NVM. Use AQ instead to read the actual NVM. Change-Id: Ia0f2773b722db77d093f738c068af872be69bbd4 Signed-off-by:
Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by:
-
Jesse Brandeburg authored
Remove custom i40e functions around ethernet addresses that are duplicating already existing kernel functionality. Also ends up fixing a bug with multicast addresses. Signed-off-by:
-
Anjali Singhai Jain authored
Debugfs was reading exactly half the number of words, fix it. Change-Id: Ieb217f3c6dca455d44e50a0dc61a6664c0cb2265 Signed-off-by:
-
David S. Miller authored
bgmac: add initial support for core rev 4 on ARM BCM47xx ==================== This adds support for core rev 4 and ARM BCM47XX. With an other fix to the platform code I am now getting over 200 MBit/s with this Ethernet driver, the DMA problems are solved are unrelated to bgmac. v3: - moved flags calculation for bcma_core_enable() into if block - remove hard coding of phy address to BGMAC_PHY_NOREGS v2: add changed suggested by Rafał ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Hauke Mehrtens authored
This adds support for the Northstar SoC. This SoC does not have a PMU in bcma and no register on it should be called. In addition it support 2.5 GBit/s Ethernet to the PHY. This GMAC core is not fully working there are still problems with the DMA controller. Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
-
Hauke Mehrtens authored
On the Northstar SoC (BCM4707 and BCM53018) we have to enable all GMAC cores when we just want to use on. We iterate over all the cores and activate them. Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
-
Hauke Mehrtens authored
The BGMAC_CMDCFG_SR register is at a different position on core rev >= 4 We do not know where this register is on a rev 5 or higher core, I have newer seen such a core. Signed-off-by:
-
Hauke Mehrtens authored
The DMA controller used in the device supported by GMAC with core rev >= 4 has some new options which are now set to the default values used in the Broadcom SDK. Signed-off-by:
-
Hauke Mehrtens authored
This function is used to get a specific core when there is more than one core of that specific type. This is used in bgmac to reset all GMAC cores. Signed-off-by:
-
stephen hemminger authored
Remove dead code; tipc_bearer_find_interface tipc_node_redundant_links This may break out of tree version of TIPC if there still is one. But that maybe a good thing :-) Signed-off-by:Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
stephen hemminger authored
Signed-off-by:
-
stephen hemminger authored
Make DCCP module config variable static, only used in one file. Signed-off-by:
-
stephen hemminger authored
This function is defined but not used. Remove it now, can be resurrected if ever needed. Signed-off-by:
-
Li RongQing authored
They are same, so unify them as one; since macvlan is a kind of vlan, vlan_pcpu_stats should be a proper name for vlan and macvlan. Signed-off-by:
Li RongQing <roy.qing.li@gmail.com> Signed-off-by:
-
Li RongQing authored
They are same, so unify them as one, pcpu_sw_netstats. Define pcpu_sw_netstat in netdevice.h, remove pcpu_tstats from if_tunnel and remove br_cpu_netstats from br_private.h Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-nextDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates This series contains updates to i40e and pci_regs.h. Anjali provides a patch to prevent messages from stray HMC events, except at interrupt message level, and refactors the HMC error handling. Catherine adds routines in probe to populate/check PCI bus speed and width, then verify we are in a 8GT/s x8 PCIe slot and warn when we are not. Shannon adds Wake-on-LAN support for i40e, fixes curly brace use as well as return type for i40e_vsi_clear_rings(). Joseph implements receive offload for VXLAN for i40e, where the hardware supports checksum offload/verification of the inner/outer header. Mitch provides the bulk of the changes, where he refactors the VF reset code so that it works on real hardware. Then does code cleanup by calling existing functions to enable and disable queues for VFs and remove unused functions. Removes a unnecessary log messages that are seen at every VF reset, for example complaining about disabling queues that are already disabled. Fixes an error return when the VF asks to add an invalid MAC address and if the VF sends a bad message, make it more informative about what is actually going on. Jesse refactors the LED function to flash LED lights correctly. v2: - removed patch 5 "i40e: add set settings and pauseparam" based on feedback from Ben Hutchings, will re-work that patch for later submission - Added patch "i40e: Implementation of vxlan ndo's" from Joseph to address Or Gerlitz's questions and concerns. This patch adds the implementation for the VXLAN ndo's and allows the hardware to do receive checksum offload for inner packets on the UDP ports that VXLAN notifies us about. - Added patch "i40e: using for_each_set_bit to simplify the code" from Wei Yongjun. This patch uses for_each_set_bit() to simply the code. v3: - fixed indentation issue in patch 11 based on feedback from Sergei Shtylyov. Sorry for the delayed release of v4, it was delayed to the holidays. v4: - Addressed Or Gerlitz's concerns about trying to get a hold of a mutex while holding a spin lock in patch 6 by executing the AQ commands from a subtask. - Addressed David Miller's Kconfig concerns by creating a Kconfig VXLAN option for i40e and wrapped appropriate code with the config option in patch 6. - Updated patch 7 based on the changes made in patch 6 in the above two bullets. v5: - Added the patch to pci_regs.h based on David Miller's feedback to add PCI defines for speed and width - Updated patch 3 description to better explain the changes based on feedback from David Miller - Updated patch 4 to use the newly added defines to pci_regs.h instead of local defines - Updated patch 7 to use <net/vxlan.h> in the #include based on feedback from David Miller ==================== Signed-off-by: -
Sergei Shtylyov authored
phy_scan_fixups() isn't and shouldn't be called by the drivers directly, so unexport it. And since Florian Fainelli's recent patches, the function is only called locally, so we can make it static as well. Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Sergei Shtylyov authored
Remove adjust_state() callback from 'struct phy_device' since it seems to have never been really used from the inception: phy_start_machine() has been always called with 2nd argument equal to NULL. Signed-off-by:
-
Sergei Shtylyov authored
Remove excess empty lines such as those between a function call and its result check and just duplicate ones between functions. Signed-off-by:
-
Sergei Shtylyov authored
Remove some excess code: - convert assignments to initializers; - kill useless assignments before *return*. Signed-off-by:
-
Sergei Shtylyov authored
A number of functions (especially in phy.c) has local variables that were hardly needed in the first place -- remove them. Signed-off-by:
-
Sergei Shtylyov authored
Running 'checkpatch.pl' gives some errors and warnings: - no spaces around =; - * separated by space from the function name; - { in function definition not on a separate line; - line over 80 characters. While fixing these, also fix the following style issues: - file name in the heading comment; - alignment not matching open paren. Signed-off-by: -
Sergei Shtylyov authored
The recent patch from Florian Fainelli fixed all 'checkpatch.pl' errors but left some warnings like: - including <asm/io.h> instead of <linux/io.h>; - including <asm/uaccess.h> instead of <linux/uaccess.h>; - block comments using empty /* line; - 'struct dev_pm_ops' variable not being *const*. While fixing these, also fix the following style issues (some of which were found running 'checkpatch.pl --strict'): - alignment not matching open paren; - file name in the heading comment. Signed-off-by:
-
Sergei Shtylyov authored
The recent patch from Florian Fainelli fixed all 'checkpatch.pl' errors but left the numerous warnings: - including <asm/io.h> instead of <linux/io.h>; - including <asm/uaccess.h> instead of <linux/uaccess.h>; - *extern* declaration in .c file; - block comments using empty /* line; - block comments not starting with * on the middle lines; - block comments not having trailing */ on a separate line; - EXPORT_SYMBOL() not immediately following its function; - unnecessary {} for signle statement block; - spaces before tabs. While fixing these, also fix the following style issues (some of which were found running 'checkpatch.pl --strict'): - alignment not matching open paren; - missing {} on one of the *if* arms where another has them; - use of sizeof(struct structure) instead of sizeof(*variable); - multiple assignments on one line; - empty line before }; - file names in the heading comments; - missing spaces around operators; - no {} around multi-line *if* operator's arm; - unneeded () around subexpressions; - incomplete kernel-doc comment style; - comment line exceeding 80 characters; - missing empty line after declarations. Signed-off-by:
-
- 04 Jan, 2014 11 commits
-
-
Mitch Williams authored
If the user does not assign a VF MAC address, then just report it as zero. Attempting to guess the correct primary MAC address of the VF is a futile and heartbreaking endeavour. Change-Id: I2673577a160afb6fc55094c890467b44e60c7584 Signed-off-by:
-
Jesse Brandeburg authored
Add an argument to led function and refactor code to flash LED lights correctly. Change-Id: I00b21607ced53aaa057159503875708871946259 Signed-off-by:
-
Mitch Williams authored
Make a define used in the header file by both VF and PF drivers. Change-Id: Ie9e35adcc021cd6a8f7513934984eb4ed55774f5 Signed-off-by:
-
Mitch Williams authored
If the VF sends a bad message, be more informative about what it actually is. Change-Id: I89e06d2db416a1d05aeea016dd6e8b7870cae99a Signed-off-by:
-
Mitch Williams authored
If the VF asks to add an invalid MAC address, tell it that instead of just using a generic return code. Change-Id: I366aff5449fa5874ad51e2734cac2a71783ab14b Signed-off-by:
-
Mitch Williams authored
Don't complain when we disable queues that are already disable, or enable them when they're already enabled. This removes a bunch of bogus log messages that we see at every VF reset. Change-Id: Ia127be572abdccc48a53d8c43f8a07b8bb920de1 Signed-off-by:
-
Mitch Williams authored
Don't keep separate functions to enable and disable queues for the VFs. Just call the existing function that everybody else uses. Remove the unused functions. Change-Id: I15db9aad64a59e502bfe1e0fdab9b347ab85c12c Signed-off-by:
-
Mitch Williams authored
Fix the VF reset flow so that it works on real hardware. After discussions with the HW team, the reset flow has been changed somewhat. - Change the i40e_reset_vf function to a void type, and fix up the callers to reflect this. - Move the MSI-X disable code to i40e_free_vf_res since it must be done every time the VF is freed, regardless of whether or not it is reset. - Ensure that the PCIe bus is quiet before polling the reset bit. - Don't clear the VFGEN_RSTAT1 register at the beginning as it is cleared by the reset. - Poll longer for the reset to be done. - Disable the queues using an existing function rather than rolling our own. - Free and reallocate the VSI after reset to avoid rx hang. Change-Id: I11e2590431cb73e8663714d1cc5b23d59b809033 Signed-off-by:
-
Mitch Williams authored
The VF reset code will be refactored in future patches. Part of that refactor required it to call i40e_alloc_vf_res and i40e_free_vf_res, so the function must be moved. In order to make the future patches more readable, we perform the function move here, with no other changes. Change-Id: If6567c9c0bada6caafb2ee0227e0d9d50d05f27f Signed-off-by:
-
Joseph Gasparakis authored
This implements receive offload for VXLAN for i40e. The hardware supports checksum offload/verification of the inner/outer header. Change-Id: I450db300af6713f2044fef1191a0d1d294c13369 Signed-off-by:
Joseph Gasparakis <joseph.gasparakis@intel.com> Signed-off-by:
-
Jeff Kirsher authored
This adds the implementation for the VXLAN ndo's. This allows the hardware to do RX checksum offload for inner packets on the UDP ports that VXLAN notifies us about. Signed-off-by:
-
