Merge tag 'irqchip-fixes-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip fixes for 5.6, take #1 from Marc Zyngier:

 - Guarantee allocation of L2 vPE table for GICv4.1
 - Fix GICv4.1 VPROPBASER programming
 - Numerous GICv4.1 tidy ups
 - Fix disabled GICv3 redistributor provisioning with ACPI
 - KConfig cleanup for C-SKY

V{PEND,PROP}BASER registers are actually located in VLPI_base frame
of the *redistributor*. Rename their accessors to reflect this fact.

No functional changes.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200206075711.1275-7-yuzenghui@huawei.com

"ITS virtual pending table not cleaning" is already complained inside
its_clear_vpend_valid(), there's no need to trigger a WARN_ON again.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200206075711.1275-6-yuzenghui@huawei.com

The variable 'tmp' in inherit_vpe_l1_table_from_rd() is actually
not needed, drop it.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200206075711.1275-5-yuzenghui@huawei.com

In GICv4, we will ensure that level2 vPE table memory is allocated
for the specified vpe_id on all v4 ITS, in its_alloc_vpe_table().
This still works well for the typical GICv4.1 implementation, where
the new vPE table is shared between the ITSs and the RDs.

To make it explicit, let us introduce allocate_vpe_l2_table() to
make sure that the L2 tables are allocated on all v4.1 RDs. We're
likely not need to allocate memory in it because the vPE table is
shared and (L2 table is) already allocated at ITS level, except
for the case where the ITS doesn't share anything (say SVPET == 0,
practically unlikely but architecturally allowed).

The implementation of allocate_vpe_l2_table() is mostly copied from
its_alloc_table_entry().
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200206075711.1275-4-yuzenghui@huawei.com

Currently, we will not set vpe_l1_page for the current RD if we can
inherit the vPE configuration table from another RD (or ITS), which
results in an inconsistency between RDs within the same CommonLPIAff
group.

Let's rename it to vpe_l1_base to indicate the base address of the
vPE configuration table of this RD, and set it properly for *all*
v4.1 redistributors.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200206075711.1275-3-yuzenghui@huawei.com

The Size field of GICv4.1 VPROPBASER register indicates number of
pages minus one and together Page_Size and Size control the vPEID
width. Let's respect this requirement of the architecture.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200206075711.1275-2-yuzenghui@huawei.com

There's some confusion around if an irq that's disabled with disable_irq()
can still wake the system from sleep states such as "suspend to RAM".

Clarify this in the kernel documentation for irq_set_irq_wake() so that
it's clear that an irq can be disabled and still wake the system if it has
been marked for wakeup.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lkml.kernel.org/r/20200206191521.94559-1-swboyd@chromium.org

Pull more KVM updates from Paolo Bonzini:
 "s390:
   - fix register corruption
   - ENOTSUPP/EOPNOTSUPP mixed
   - reset cleanups/fixes
   - selftests

  x86:
   - Bug fixes and cleanups
   - AMD support for APIC virtualization even in combination with
     in-kernel PIT or IOAPIC.

  MIPS:
   - Compilation fix.

  Generic:
   - Fix refcount overflow for zero page"

* tag 'kvm-5.6-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits)
  KVM: vmx: delete meaningless vmx_decache_cr0_guest_bits() declaration
  KVM: x86: Mark CR4.UMIP as reserved based on associated CPUID bit
  x86: vmxfeatures: rename features for consistency with KVM and manual
  KVM: SVM: relax conditions for allowing MSR_IA32_SPEC_CTRL accesses
  KVM: x86: Fix perfctr WRMSR for running counters
  x86/kvm/hyper-v: don't allow to turn on unsupported VMX controls for nested guests
  x86/kvm/hyper-v: move VMX controls sanitization out of nested_enable_evmcs()
  kvm: mmu: Separate generating and setting mmio ptes
  kvm: mmu: Replace unsigned with unsigned int for PTE access
  KVM: nVMX: Remove stale comment from nested_vmx_load_cr3()
  KVM: MIPS: Fold comparecount_func() into comparecount_wakeup()
  KVM: MIPS: Fix a build error due to referencing not-yet-defined function
  x86/kvm: do not setup pv tlb flush when not paravirtualized
  KVM: fix overflow of zero page refcount with ksm running
  KVM: x86: Take a u64 when checking for a valid dr7 value
  KVM: x86: use raw clock values consistently
  KVM: x86: reorganize pvclock_gtod_data members
  KVM: nVMX: delete meaningless nested_vmx_run() declaration
  KVM: SVM: allow AVIC without split irqchip
  kvm: ioapic: Lazy update IOAPIC EOI
  ...

Pull kgdb fix from Daniel Thompson:
 "One of the simplifications added for 5.6-rc1 has caused build
  regressions on some platforms (it was reported for sparc64).

  This fixes it with a revert"

* tag 'kgdb-fixes-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
  Revert "kdb: Get rid of confusing diag msg from "rd" if current task has no regs"

Pull PCI fixes from Bjorn Helgaas:

 - Define to_pci_sysdata() always to fix build breakage when !CONFIG_PCI
   (Jason A. Donenfeld)

 - Use PF PASID for VFs to fix VF IOMMU bind failures (Kuppuswamy
   Sathyanarayanan)

* tag 'pci-v5.6-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI/ATS: Use PF PASID for VFs
  x86/PCI: Define to_pci_sysdata() even when !CONFIG_PCI

Pull sound fixes from Takashi Iwai:
 "A collection of pending small fixes:

  ALSA core:
   - PCM memory leak fix

  ASoC:
   - Lots of SOF and Intel driver fixes
   - Addition of COMMON_CLK for wcd934x
   - Regression fixes for AMD and Tegra platforms

  HD-audio:
   - DP-MST HDMI regression fix, Tegra workarounds, HP quirk fix

  Others:
   - A few fixes relevant with the recent uapi-updates
   - Sparse warnings and endianness fixes"

* tag 'sound-fix-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (35 commits)
  ALSA: hda: Clear RIRB status before reading WP
  ALSA: hda/realtek - Fixed one of HP ALC671 platform Headset Mic supported
  ASoC: wcd934x: Add missing COMMON_CLK dependency to SND_SOC_ALL_CODECS
  ALSA: hda - Fix DP-MST support for NVIDIA codecs
  ASoC: wcd934x: Add missing COMMON_CLK dependency
  MAINTAINERS: Remove the Bard Liao from the MAINTAINERS of Realtek CODECs
  ASoC: tegra: Revert 24 and 32 bit support
  ASoC: SOF: Intel: add PCI ID for JasperLake
  ALSA: hdsp: Make the firmware loading ioctl a bit more readable
  ALSA: emu10k1: Fix annotation and cast for the recent uapi header change
  ALSA: dummy: Fix PCM format loop in proc output
  ALSA: usb-audio: Annotate endianess in Scarlett gen2 quirk
  ALSA: usb-audio: Fix endianess in descriptor validation
  ALSA: hda: Add JasperLake PCI ID and codec vid
  ALSA: pcm: Fix sparse warnings wrt snd_pcm_state_t
  ALSA: pcm: Fix memory leak at closing a stream without hw_free
  ALSA: uapi: Fix sparse warning
  ASoC: rt715: Add __maybe_unused to PM callbacks
  ASoC: rt711: Add __maybe_unused to PM callbacks
  ASoC: rt700: Add __maybe_unused to PM callbacks
  ...

Pull ceph fixes from Ilya Dryomov:

 - a set of patches that fixes various corner cases in mount and umount
   code (Xiubo Li). This has to do with choosing an MDS, distinguishing
   between laggy and down MDSes and parsing the server path.

 - inode initialization fixes (Jeff Layton). The one included here
   mostly concerns things like open_by_handle() and there is another one
   that will come through Al.

 - copy_file_range() now uses the new copy-from2 op (Luis Henriques).
   The existing copy-from op turned out to be infeasible for generic
   filesystem use; we disable the copy offload if OSDs don't support
   copy-from2.

 - a patch to link "rbd" and "block" devices together in sysfs (Hannes
   Reinecke)

... and a smattering of cleanups from Xiubo, Jeff and Chengguang.

* tag 'ceph-for-5.6-rc1' of https://github.com/ceph/ceph-client: (25 commits)
  rbd: set the 'device' link in sysfs
  ceph: move net/ceph/ceph_fs.c to fs/ceph/util.c
  ceph: print name of xattr in __ceph_{get,set}xattr() douts
  ceph: print r_direct_hash in hex in __choose_mds() dout
  ceph: use copy-from2 op in copy_file_range
  ceph: close holes in structs ceph_mds_session and ceph_mds_request
  rbd: work around -Wuninitialized warning
  ceph: allocate the correct amount of extra bytes for the session features
  ceph: rename get_session and switch to use ceph_get_mds_session
  ceph: remove the extra slashes in the server path
  ceph: add possible_max_rank and make the code more readable
  ceph: print dentry offset in hex and fix xattr_version type
  ceph: only touch the caps which have the subset mask requested
  ceph: don't clear I_NEW until inode metadata is fully populated
  ceph: retry the same mds later after the new session is opened
  ceph: check availability of mds cluster on mount after wait timeout
  ceph: keep the session state until it is released
  ceph: add __send_request helper
  ceph: ensure we have a new cap before continuing in fill_inode
  ceph: drop unused ttl_from parameter from fill_inode
  ...

This reverts commit bbfceba1.

When DBG_MAX_REG_NUM is zero then a number of symbols are conditionally
defined. It is therefore not possible to check it using C expressions.
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Acked-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>

Merge tag 'asoc-v5.6-3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fix for v5.6

An incremental fix for the Qualcomm COMMON_CLK issue.

RIRB interrupt status getting cleared after the write pointer is read
causes a race condition, where last response(s) into RIRB may remain
unserviced by IRQ, eventually causing azx_rirb_get_response to fall
back to polling mode. Clearing the RIRB interrupt status ahead of
write pointer access ensures that this condition is avoided.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Signed-off-by: Viswanath L <viswanathl@nvidia.com>
Link: https://lore.kernel.org/r/1580983853-351-1-git-send-email-viswanathl@nvidia.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Pull m68knommu updates from Greg Ungerer:
 "A couple of changes:

   - remove old CONFIG options from the m68knommu defconfig files

   - fix a warning in the m68k non-MMU get_user() macro"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: fix memcpy() out of bounds warning in get_user()
  m68k: configs: Cleanup old Kconfig IO scheduler options

Pull smack fix from Casey Schaufler:
 "One fix for an obscure error found using an old version of ping(1)
  that did not use IPv6 sockets in the documented way"

* tag 'Smack-for-5.6' of git://github.com/cschaufler/smack-next:
  broken ping to ipv6 linklocal addresses on debian buster

Pull moar xfs updates from Darrick Wong:
 "This contains the buffer error code refactoring I mentioned last week,
  now that it has had extra time to complete the full xfs fuzz testing
  suite to make sure there aren't any obvious new bugs"

* tag 'xfs-5.6-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: fix xfs_buf_ioerror_alert location reporting
  xfs: remove unnecessary null pointer checks from _read_agf callers
  xfs: make xfs_*read_agf return EAGAIN to ALLOC_FLAG_TRYLOCK callers
  xfs: remove the xfs_btree_get_buf[ls] functions
  xfs: make xfs_trans_get_buf return an error code
  xfs: make xfs_trans_get_buf_map return an error code
  xfs: make xfs_buf_read return an error code
  xfs: make xfs_buf_get_uncached return an error code
  xfs: make xfs_buf_get return an error code
  xfs: make xfs_buf_read_map return an error code
  xfs: make xfs_buf_get_map return an error code
  xfs: make xfs_buf_alloc return an error code

Pull tracing updates from Steven Rostedt:

 - Added new "bootconfig".

   This looks for a file appended to initrd to add boot config options,
   and has been discussed thoroughly at Linux Plumbers.

   Very useful for adding kprobes at bootup.

   Only enabled if "bootconfig" is on the real kernel command line.

 - Created dynamic event creation.

   Merges common code between creating synthetic events and kprobe
   events.

 - Rename perf "ring_buffer" structure to "perf_buffer"

 - Rename ftrace "ring_buffer" structure to "trace_buffer"

   Had to rename existing "trace_buffer" to "array_buffer"

 - Allow trace_printk() to work withing (some) tracing code.

 - Sort of tracing configs to be a little better organized

 - Fixed bug where ftrace_graph hash was not being protected properly

 - Various other small fixes and clean ups

* tag 'trace-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (88 commits)
  bootconfig: Show the number of nodes on boot message
  tools/bootconfig: Show the number of bootconfig nodes
  bootconfig: Add more parse error messages
  bootconfig: Use bootconfig instead of boot config
  ftrace: Protect ftrace_graph_hash with ftrace_sync
  ftrace: Add comment to why rcu_dereference_sched() is open coded
  tracing: Annotate ftrace_graph_notrace_hash pointer with __rcu
  tracing: Annotate ftrace_graph_hash pointer with __rcu
  bootconfig: Only load bootconfig if "bootconfig" is on the kernel cmdline
  tracing: Use seq_buf for building dynevent_cmd string
  tracing: Remove useless code in dynevent_arg_pair_add()
  tracing: Remove check_arg() callbacks from dynevent args
  tracing: Consolidate some synth_event_trace code
  tracing: Fix now invalid var_ref_vals assumption in trace action
  tracing: Change trace_boot to use synth_event interface
  tracing: Move tracing selftests to bottom of menu
  tracing: Move mmio tracer config up with the other tracers
  tracing: Move tracing test module configs together
  tracing: Move all function tracing configs together
  tracing: Documentation for in-kernel synthetic event API
  ...

HP want to keep BIOS verb table for release platform.
So, it need to add 0x19 pin for quirk.

Fixes: 5af29028 ("ALSA: hda/realtek - Add Headset Mic supported for HP cPC")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/74636ccb700a4cbda24c58a99dc430ce@realtek.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Pull io_uring updates from Jens Axboe:
 "Some later fixes for io_uring:

   - Small cleanup series from Pavel

   - Belt and suspenders build time check of sqe size and layout
     (Stefan)

   - Addition of ->show_fdinfo() on request of Jann Horn, to aid in
     understanding mapped personalities

   - eventfd recursion/deadlock fix, for both io_uring and aio

   - Fixup for send/recv handling

   - Fixup for double deferral of read/write request

   - Fix for potential double completion event for close request

   - Adjust fadvise advice async/inline behavior

   - Fix for shutdown hang with SQPOLL thread

   - Fix for potential use-after-free of fixed file table"

* tag 'io_uring-5.6-2020-02-05' of git://git.kernel.dk/linux-block:
  io_uring: cleanup fixed file data table references
  io_uring: spin for sq thread to idle on shutdown
  aio: prevent potential eventfd recursion on poll
  io_uring: put the flag changing code in the same spot
  io_uring: iterate req cache backwards
  io_uring: punt even fadvise() WILLNEED to async context
  io_uring: fix sporadic double CQE entry for close
  io_uring: remove extra ->file check
  io_uring: don't map read/write iovec potentially twice
  io_uring: use the proper helpers for io_send/recv
  io_uring: prevent potential eventfd recursion on poll
  eventfd: track eventfd_signal() recursion depth
  io_uring: add BUILD_BUG_ON() to assert the layout of struct io_uring_sqe
  io_uring: add ->show_fdinfo() for the io_uring file descriptor

Pull more block updates from Jens Axboe:
 "Some later arrivals, but all fixes at this point:

   - bcache fix series (Coly)

   - Series of BFQ fixes (Paolo)

   - NVMe pull request from Keith with a few minor NVMe fixes

   - Various little tweaks"

* tag 'block-5.6-2020-02-05' of git://git.kernel.dk/linux-block: (23 commits)
  nvmet: update AEN list and array at one place
  nvmet: Fix controller use after free
  nvmet: Fix error print message at nvmet_install_queue function
  brd: check and limit max_part par
  nvme-pci: remove nvmeq->tags
  nvmet: fix dsm failure when payload does not match sgl descriptor
  nvmet: Pass lockdep expression to RCU lists
  block, bfq: clarify the goal of bfq_split_bfqq()
  block, bfq: get a ref to a group when adding it to a service tree
  block, bfq: remove ifdefs from around gets/puts of bfq groups
  block, bfq: extend incomplete name of field on_st
  block, bfq: get extra ref to prevent a queue from being freed during a group move
  block, bfq: do not insert oom queue into position tree
  block, bfq: do not plug I/O for bfq_queues with no proc refs
  bcache: check return value of prio_read()
  bcache: fix incorrect data type usage in btree_flush_write()
  bcache: add readahead cache policy options via sysfs interface
  bcache: explicity type cast in bset_bkey_last()
  bcache: fix memory corruption in bch_cache_accounting_clear()
  xen/blkfront: limit allocated memory size to actual use case
  ...

Pull libata updates from Jens Axboe:

 - Add a Sandisk CF card to supported pata_pcmcia list (Christian)

 - Move pata_arasan_cf away from legacy API (Peter)

 - Ensure ahci DMA/ints are shut down on shutdown (Prabhakar)

* tag 'libata-5.6-2020-02-05' of git://git.kernel.dk/linux-block:
  ata: pata_arasan_cf: Use dma_request_chan() instead dma_request_slave_channel()
  ata: ahci: Add shutdown to freeze hardware resources of ahci
  pata_pcmia: add SanDisk High (>8G) CF card to supported list

Show the number of bootconfig nodes on boot message.

Link: http://lkml.kernel.org/r/158091062297.27924.9051634676068550285.stgit@devnote2Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Show the number of bootconfig nodes when applying new bootconfig to
initrd.

Since there are limitations of bootconfig not only in its filesize,
but also the number of nodes, the number should be shown when applying
so that user can get the feeling of scale of current bootconfig.

Link: http://lkml.kernel.org/r/158091061337.27924.10886706631693823982.stgit@devnote2Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Add more error messages for following cases.
 - Exceeding max number of nodes
 - Config tree data is empty (e.g. comment only)
 - Config data is empty or exceeding max size
 - bootconfig is already initialized

Link: http://lkml.kernel.org/r/158091060401.27924.9024818742827122764.stgit@devnote2Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Use "bootconfig" (1 word) instead of "boot config" (2 words)
in the boot message.

Link: http://lkml.kernel.org/r/158091059459.27924.14414336187441539879.stgit@devnote2Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

As function_graph tracer can run when RCU is not "watching", it can not be
protected by synchronize_rcu() it requires running a task on each CPU before
it can be freed. Calling schedule_on_each_cpu(ftrace_sync) needs to be used.

Link: https://lore.kernel.org/r/20200205131110.GT2935@paulmck-ThinkPad-P72

Cc: stable@vger.kernel.org
Fixes: b9b0c831 ("ftrace: Convert graph filter to use hash tables")
Reported-by: "Paul E. McKenney" <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

I am seeing ping failures to IPv6 linklocal addresses with Debian
buster. Easiest example to reproduce is:

$ ping -c1 -w1 ff02::1%eth1
connect: Invalid argument

$ ping -c1 -w1 ff02::1%eth1
PING ff02::01%eth1(ff02::1%eth1) 56 data bytes
64 bytes from fe80::e0:f9ff:fe0c:37%eth1: icmp_seq=1 ttl=64 time=0.059 ms

git bisect traced the failure to
commit b9ef5513 ("smack: Check address length before reading address family")

Arguably ping is being stupid since the buster version is not setting
the address family properly (ping on stretch for example does):

$ strace -e connect ping6 -c1 -w1 ff02::1%eth1
connect(5, {sa_family=AF_UNSPEC,
sa_data="\4\1\0\0\0\0\377\2\0\0\0\0\0\0\0\0\0\0\0\0\0\1\3\0\0\0"}, 28)
= -1 EINVAL (Invalid argument)

but the command works fine on kernels prior to this commit, so this is
breakage which goes against the Linux paradigm of "don't break userspace"

Cc: stable@vger.kernel.org
Reported-by: David Ahern <dsahern@gmail.com>
Suggested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>

 security/smack/smack_lsm.c | 41 +++++++++++++++++++----------------------
 1 file changed, 19 insertions(+), 22 deletions(-)

Because the function graph tracer can execute in sections where RCU is not
"watching", the rcu_dereference_sched() for the has needs to be open coded.
This is fine because the RCU "flavor" of the ftrace hash is protected by
its own RCU handling (it does its own little synchronization on every CPU
and does not rely on RCU sched).
Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Fix following instances of sparse error
kernel/trace/ftrace.c:5667:29: error: incompatible types in comparison
kernel/trace/ftrace.c:5813:21: error: incompatible types in comparison
kernel/trace/ftrace.c:5868:36: error: incompatible types in comparison
kernel/trace/ftrace.c:5870:25: error: incompatible types in comparison

Use rcu_dereference_protected to dereference the newly annotated pointer.

Link: http://lkml.kernel.org/r/20200205055701.30195-1-frextrite@gmail.comSigned-off-by: Amol Grover <frextrite@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Fix following instances of sparse error
kernel/trace/ftrace.c:5664:29: error: incompatible types in comparison
kernel/trace/ftrace.c:5785:21: error: incompatible types in comparison
kernel/trace/ftrace.c:5864:36: error: incompatible types in comparison
kernel/trace/ftrace.c:5866:25: error: incompatible types in comparison

Use rcu_dereference_protected to access the __rcu annotated pointer.

Link: http://lkml.kernel.org/r/20200201072703.17330-1-frextrite@gmail.comReviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Amol Grover <frextrite@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Merge tag 'pwm/for-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "Mostly cleanups and minor improvements with some new chip support for
  some drivers"

* tag 'pwm/for-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (37 commits)
  pwm: Remove set but not set variable 'pwm'
  pwm: sun4i: Initialize variables before use
  pwm: stm32: Remove automatic output enable
  pwm: sun4i: Narrow scope of local variable
  pwm: bcm2835: Allow building for ARCH_BRCMSTB
  pwm: imx27: Eliminate error message for defer probe
  pwm: sun4i: Fix inconsistent IS_ERR and PTR_ERR
  pwm: sun4i: Move pwm_calculate() out of spin_lock()
  pwm: omap-dmtimer: Allow compiling with COMPILE_TEST
  pwm: omap-dmtimer: put_device() after of_find_device_by_node()
  pwm: omap-dmtimer: Simplify error handling
  pwm: omap-dmtimer: Remove PWM chip in .remove before making it unfunctional
  pwm: Implement tracing for .get_state() and .apply_state()
  pwm: rcar: Document inability to set duty_cycle = 0
  pwm: rcar: Drop useless call to pwm_get_state()
  pwm: Fix minor Kconfig whitespace issues
  pwm: atmel: Implement .get_state()
  pwm: atmel: Use register accessors for channels
  pwm: atmel: Document known weaknesses of both hardware and software
  pwm: atmel: Replace loop in prescale calculation by ad-hoc calculation
  ...

Pull dmaengine fixes from Vinod Koul:
 "Fixes for:

   - Documentation build error fix

   - Fix dma_request_chan() error return

   - Remove unneeded conversion in idxd driver

   - Fix pointer check for dma_async_device_channel_register()

   - Fix slave-channel symlink cleanup"

* tag 'dmaengine-fix-5.6-rc1' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: Cleanups for the slave <-> channel symlink support
  dmaengine: fix null ptr check for __dma_async_device_channel_register()
  dmaengine: idxd: fix boolconv.cocci warnings
  dmaengine: Fix return value for dma_request_chan() in case of failure
  dmaengine: doc: Properly indent metadata title

Per PCIe r5.0, sec 9.3.7.14, if a PF implements the PASID Capability, the
PF PASID configuration is shared by its VFs, and VFs must not implement
their own PASID Capability.  But commit 751035b8 ("PCI/ATS: Cache PASID
Capability offset") changed pci_max_pasids() and pci_pasid_features() to
use the PASID Capability of the VF device instead of the associated PF
device.  This leads to IOMMU bind failures when pci_max_pasids() and
pci_pasid_features() are called for VFs.

In pci_max_pasids() and pci_pasid_features(), always use the PF PASID
Capability.

Fixes: 751035b8 ("PCI/ATS: Cache PASID Capability offset")
Link: https://lore.kernel.org/r/fe891f9755cb18349389609e7fed9940fc5b081a.1580325170.git.sathyanarayanan.kuppuswamy@linux.intel.comSigned-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org	# v5.5+

Pull iommu updates from Joerg Roedel:

 - Allow compiling the ARM-SMMU drivers as modules.

 - Fixes and cleanups for the ARM-SMMU drivers and io-pgtable code
   collected by Will Deacon. The merge-commit (6855d1ba) has all the
   details.

 - Cleanup of the iommu_put_resv_regions() call-backs in various
   drivers.

 - AMD IOMMU driver cleanups.

 - Update for the x2APIC support in the AMD IOMMU driver.

 - Preparation patches for Intel VT-d nested mode support.

 - RMRR and identity domain handling fixes for the Intel VT-d driver.

 - More small fixes and cleanups.

* tag 'iommu-updates-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (87 commits)
  iommu/amd: Remove the unnecessary assignment
  iommu/vt-d: Remove unnecessary WARN_ON_ONCE()
  iommu/vt-d: Unnecessary to handle default identity domain
  iommu/vt-d: Allow devices with RMRRs to use identity domain
  iommu/vt-d: Add RMRR base and end addresses sanity check
  iommu/vt-d: Mark firmware tainted if RMRR fails sanity check
  iommu/amd: Remove unused struct member
  iommu/amd: Replace two consecutive readl calls with one readq
  iommu/vt-d: Don't reject Host Bridge due to scope mismatch
  PCI/ATS: Add PASID stubs
  iommu/arm-smmu-v3: Return -EBUSY when trying to re-add a device
  iommu/arm-smmu-v3: Improve add_device() error handling
  iommu/arm-smmu-v3: Use WRITE_ONCE() when changing validity of an STE
  iommu/arm-smmu-v3: Add second level of context descriptor table
  iommu/arm-smmu-v3: Prepare for handling arm_smmu_write_ctx_desc() failure
  iommu/arm-smmu-v3: Propagate ssid_bits
  iommu/arm-smmu-v3: Add support for Substream IDs
  iommu/arm-smmu-v3: Add context descriptor tables allocators
  iommu/arm-smmu-v3: Prepare arm_smmu_s1_cfg for SSID support
  ACPI/IORT: Parse SSID property of named component node
  ...

Pull xen updates from Juergen Gross:

 - fix a bug introduced in 5.5 in the Xen gntdev driver

 - fix the Xen balloon driver when running on ancient Xen versions

 - allow Xen stubdoms to control interrupt enable flags of
   passed-through PCI cards

 - release resources in Xen backends under memory pressure

* tag 'for-linus-5.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/blkback: Consistently insert one empty line between functions
  xen/blkback: Remove unnecessary static variable name prefixes
  xen/blkback: Squeeze page pools if a memory pressure is detected
  xenbus/backend: Protect xenbus callback with lock
  xenbus/backend: Add memory pressure handler callback
  xen/gntdev: Do not use mm notifiers with autotranslating guests
  xen/balloon: Support xend-based toolstack take two
  xen-pciback: optionally allow interrupt enable flag writes

Pull devicetree fixes from Rob Herring:

 - Fix incorrect $id paths in schemas

 - Two fixes for Intel LGM SoC binding schemas

* tag 'devicetree-fixes-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: Fix paths in schema $id fields
  dt-bindings: PCI: intel: Fix dt_binding_check compilation failure
  dt-bindings: phy: Fix errors in intel,lgm-emmc-phy example

Pull more s390 updates from Vasily Gorbik:
 "The second round of s390 fixes and features for 5.6:

   - Add KPROBES_ON_FTRACE support

   - Add EP11 AES secure keys support

   - PAES rework and prerequisites for paes-s390 ciphers selftests

   - Fix page table upgrade for hugetlbfs"

* tag 's390-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/pkey/zcrypt: Support EP11 AES secure keys
  s390/zcrypt: extend EP11 card and queue sysfs attributes
  s390/zcrypt: add new low level ep11 functions support file
  s390/zcrypt: ep11 structs rework, export zcrypt_send_ep11_cprb
  s390/zcrypt: enable card/domain autoselect on ep11 cprbs
  s390/crypto: enable clear key values for paes ciphers
  s390/pkey: Add support for key blob with clear key value
  s390/crypto: Rework on paes implementation
  s390: support KPROBES_ON_FTRACE
  s390/mm: fix dynamic pagetable upgrade for hugetlbfs