- 05 May, 2018 14 commits
-
-
Brad Love authored
Replace zero fill memset inits with equivalent {} in declaration Signed-off-by:Brad Love <brad@nextdimension.cc> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Brad Love authored
Replace all usage of hard coded values with the proper field from the board profile. Signed-off-by:
-
Brad Love authored
Now the board values match the hard coded constants used in the dvb initialization. Signed-off-by:
-
Jia-Ju Bai authored
Despite never getting called from atomic context, usb URB memory allocations use GFP_ATOMIC, which does not sleep for allocation. GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL, which can sleep and improve the possibility of sucessful allocation. This is found by a static analysis tool named DCNS written by myself. And I also manually check it. [mchehab+samsung@kernel.org: merged 3 similar patches into one] Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
As warned by smatch: drivers/media/pci/pt1/pt1.c:213 config_demod() error: strncmp() '"tc90522sat"' too small (11 vs 20) Use the same strncmp() syntax as pt1_init_frontends() does. Signed-off-by: -
Akihiro Tsukada authored
As described in Document/timers/timers-howto.txt, hrtimer-based delay should be used for small sleeps. Signed-off-by:
Akihiro Tsukada <tskd08@gmail.com> Signed-off-by:
-
Akihiro Tsukada authored
Without this patch, re-loading of the module was required after resume. Signed-off-by:
-
Akihiro Tsukada authored
earth-pt1 was a monolithic module and included demod/tuner drivers. This patch removes those FE parts and attach demod/tuner i2c drivers. Signed-off-by:
-
Akihiro Tsukada authored
The tuner is used in Earthsoft PT1/PT2 DVB boards, and the driver was extraced from (the former) va1j5jf8007s.c of PT1. it might contain PT1 specific configs. Signed-off-by:
-
Akihiro Tsukada authored
This patch adds a PLL "description" of Philips TDA6651 for ISDB-T. It was extracted from (the former) va1j5jf8007t.c of EarthSoft PT1, thus the desc might include PT1 specific configs. Signed-off-by:
-
Akihiro Tsukada authored
i2c message buf might be on stack. Signed-off-by:
-
Akihiro Tsukada authored
As the kernel doc "timers-howto.txt" reads, short delay with msleep() can take much longer. In a case of raspbery-pi platform where CONFIG_HZ_100 was set, it actually affected the init of Friio devices since it issues lots of i2c transactions with short delay. Signed-off-by:
-
Akihiro Tsukada authored
This driver already contains tua6034-based device settings, but they are not for ISDB-T and have different parameters. Signed-off-by:
-
Akihiro Tsukada authored
registers the module as an i2c driver, but keeps dvb_pll_attach() untouched for compatibility. Signed-off-by:
-
- 04 May, 2018 26 commits
-
-
Mauro Carvalho Chehab authored
Instead of using printk() directly, use the pr_foo() macros. Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Acked-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Chris Lesiak authored
Propagate the v4l2_mbus_framefmt to the source pad when either a sink pad is activated or when the format of the active sink pad changes. Signed-off-by:
Chris Lesiak <chris.lesiak@licor.com> Reviewed-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Nasser Afshin authored
This patch resolves the following checkpatch.pl error: ERROR: that open brace { should be on the previous line Signed-off-by:Nasser Afshin <Afshin.Nasser@gmail.com> Signed-off-by:
-
Nasser Afshin authored
This patch resolves checkpatch.pl warnings: WARNING: Block comments use * on subsequent lines WARNING: Block comments use a trailing */ on a separate line Signed-off-by: -
Nasser Afshin authored
This patch resolves checkpatch.pl errors: ERROR: space required after that ',' (ctx:VxV) Signed-off-by: -
Nasser Afshin authored
This patch resolves a checkpatch.pl warning: WARNING: sizeof *cap should be sizeof(*cap) Signed-off-by: -
Samuel Williams authored
When capturing at yuv410p, sg_next was called too many times when chroma is false, eventually returning NULL. This patch does fix this for my hardware. Signed-off-by:
Samuel Williams <sam8641@gmail.com> Signed-off-by:
-
Akihiro Tsukada authored
Signed-off-by:
-
Akihiro Tsukada authored
Signed-off-by:
-
Akihiro Tsukada authored
Signed-off-by:
-
Akihiro Tsukada authored
Signed-off-by:
-
Akihiro Tsukada authored
DTV_ISDBT_LAYER_ENABLED parameter should be set to "All" by default, instead of "None", as described in the API document. Signed-off-by:
-
Akihiro Tsukada authored
GIT_AUTHOR_NAME=Akihiro TSUKADA GIT_AUTHOR_EMAIL=tskd08@gmail.com they were obviously wrong. Signed-off-by:
-
Fabio Estevam authored
Structure i2c_driver does not need to set the owner field, as this will be populated by the driver core. Generated by scripts/coccinelle/api/platform_no_drv_owner.cocci. Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
-
Fabio Estevam authored
Structure i2c_driver does not need to set the owner field, as this will be populated by the driver core. Generated by scripts/coccinelle/api/platform_no_drv_owner.cocci. Cc: Shunqian Zheng <zhengsq@rock-chips.com> Signed-off-by:
-
Chris Mayo authored
Messages expected during device probe were being marked as errors. Signed-off-by:
Chris Mayo <aklhfex@gmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Such check is already there at the routine. So, no need to repeat it outside. Cc: Akihiro Tsukada <tskd08@gmail.com> Signed-off-by: -
Akihiro Tsukada authored
This patch slightly simplifies the binding code by introducing commit 8f569c0b ("media: dvb-core: add helper functions for I2C binding"). Signed-off-by:
-
Rainer Keller authored
Newer DVB receivers of this type have a different USB PID. Signed-off-by:
Rainer Keller <mail@rainerkeller.de> Signed-off-by:
-
Daniel Scheller authored
Three really tiny minors in this single commit which all on their own would just clutter up the commit history unnecessarily: * ddbridge-regs.h is lacking an include guard. Add it. * Fix an unnecessary NULL initialisation in ddbridge-ci. The declaration of the ci struct ptr is immediately followed by kzalloc(). * Clarify that the CXD2099AR is a Sony device in the cxd2099 driver at a few places including Kconfig. Signed-off-by:
Daniel Scheller <d.scheller@gmx.net> Acked-by:
Jasmin Jessich <jasmin@anw.at> Signed-off-by:
-
Arnd Bergmann authored
The -Warray-bounds warning in gcc-8 triggers for a newly added file: drivers/media/spi/cxd2880-spi.c: In function 'cxd2880_write_reg': drivers/media/spi/cxd2880-spi.c:111:3: error: 'memcpy' forming offset [133, 258] is out of the bounds [0, 132] of object 'send_data' with type 'u8[132]' {aka 'unsigned char[132]'} [-Werror=array-bounds] The problem appears to be that we have two range checks in this function, first comparing against BURST_WRITE_MAX (128) and then comparing against a literal '255'. The logic checking the buffer size looks at the second one and decides that this might be the actual maximum data length. This is understandable behavior from the compiler, but the code is actually safe. Since the first check is already shorter, we can remove the loop and only leave that. To be on the safe side in case BURST_WRITE_MAX might be increased, I'm leaving the check against U8_MAX. Fixes: bd24fcdd ("media: cxd2880-spi: Add support for CXD2880 SPI interface") Cc: Martin Sebor <msebor@gmail.com> Signed-off-by:Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Yasunari Takiguchi <Yasunari.Takiguchi@sony.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
If state is not initialized or is freed, we can't use it: drivers/media/dvb-frontends/lgdt330x.c:920 lgdt330x_probe() error: potential null dereference 'state'. (kzalloc returns null) drivers/media/dvb-frontends/lgdt330x.c:920 lgdt330x_probe() error: we previously assumed 'state' could be null (see line 878) drivers/media/dvb-frontends/lgdt330x.c:920 lgdt330x_probe() error: dereferencing freed memory 'state' Fixes: 23ba635d ("media: lgdt330x: convert it to the new I2C binding way") Signed-off-by:
-
Mauro Carvalho Chehab authored
Show the UCB error counts via DVBv5. Please notice that there's no scale indication at the driver. As we don't have the datasheet, let's assume that it is receiving data at a rate of 10.000 packets per second. Ideally, this should be read or estimated. In order to avoid flooding I2C bus with data, the maximum polling rate for those stats was set to 1 second. Signed-off-by:
-
Mauro Carvalho Chehab authored
This routine does nothing. Remove it. Signed-off-by:
-
Mauro Carvalho Chehab authored
Change the logic at the driver to provide CNR stats via DVBv5 API. Signed-off-by:
-
Mauro Carvalho Chehab authored
In preparation to implement DVBv5 stats on this driver, move the *read_status functions to happen after SNR and signal strength routines. Signed-off-by:
-
