- 22 Jul, 2014 40 commits
-
-
Philipp Zabel authored
The driver uses the genalloc API, which doesn't have stubs in case GENERIC_ALLOCATOR is disabled. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Philipp Zabel authored
This adds a new function coda_check_firmware that does the firmware version checks so that this can be done only once from coda_probe instead of every time the runtime pm framework resumes the coda. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Philipp Zabel authored
This patch allows to use the runtime pm and generic pm domain frameworks to completely gate power to the VPU if it is unused. This functionality is available on i.MX6. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Philipp Zabel authored
v4l2_fh already contains a mem2mem context pointer. Use it. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Philipp Zabel authored
Use the mem2mem helpers introduced to get rid of some duplicated code. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Philipp Zabel authored
Using the coda_mutex lock to serialize hardware access would cause "INFO: possible circular locking dependency detected" lockdep warnings. Since the possible locking paths are hard to follow, serialize hardware access with a single workqueue thread. Ultimately the workqueue could be converted to only do register setup and readout for per-command work items. Using the initialized context property, SEQ_END is only queued in coda_release when needed. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Philipp Zabel authored
The h.264 decoder produces capture frames that are a multiple of the macroblock size (16 pixels). To inform userspace about invalid pixel data at the edges, use the active and padded composing rectangles on the capture queue. The cropping information is obtained from the h.264 sequence parameter set. Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Philipp Zabel authored
This allows us to get rid of the now superfluous v4l2_m2m_get_vq check in G_FMT. Also, we can use this to check the buffer type in G_SELECTION later. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Philipp Zabel authored
This patch adds support for the CODA960 VPU in Freescale i.MX6 SoCs. It enables h.264 and MPEG4 encoding and decoding support. Besides the usual register shifting, the CODA960 gains frame memory control and GDI registers that are set up for linear mapping right now, needs ENC_PIC_SRC_INDEX to be set beyond the number of internal buffers for some reason, and has subsampling buffers that need to be set up. Also, the work buffer size is increased to 80 KiB. The CODA960 firmware spins if there is not enough input data in the bitstream buffer. To make it continue, buffers need to be copied into the bitstream as soon as they are queued. As the bitstream fifo is written into from two places, it must be protected with a mutex. For that, using a threaded interrupt handler is necessary. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Antti Palosaari authored
Rename driver namespace according to current driver name. Old msi3101 was name of reference design, msi2500 is name of chip itself. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Antti Palosaari authored
There was a lot of duplicated functionality between different stream format handling. Refactor functionality in order to get rid of duplicated code. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Antti Palosaari authored
Correct some style issues, mostly reported by checkpatch.pl. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Arun Kumar K authored
Latest MFC v6 firmware requires tile mode and loop filter setting to be done as part of Init buffer command, in sync with v7. This patch adds this support for new v6 firmware. Signed-off-by: Arun Kumar K <arun.kk@samsung.com> Signed-off-by: Kiran AVND <avnd.kiran@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Arun Kumar K authored
For MFC firmwares, improved versions with bug fixes and feature additions are released keeping the firmware version including major and minor number same. The issue came with the release of a new MFCv6 firmware with an interface change. This patch adds the support of accepting multiple firmware binaries for every version with the driver trying to load firmwares starting from latest. This ensures full backward compatibility regardless of which firmware version and kernel version is used. Signed-off-by: Arun Kumar K <arun.kk@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Arun Kumar K authored
The function s5p_mfc_reload_firmware is exactly same as s5p_mfc_load_firmware. So removing the duplicate function. Signed-off-by: Arun Kumar K <arun.kk@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Laurent Pinchart authored
X-Patchwork-Delegate: mchehab@redhat.com Replace the custom I2C read/write implementation with SMBUS functions to simplify the driver. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Laurent Pinchart authored
X-Patchwork-Delegate: mchehab@redhat.com The driver mistakenly prints the ROM version instead of the device ID to the kernel log when detecting the chip. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Paul Bolle authored
X-Patchwork-Delegate: mchehab@redhat.com Remove the CONFIG_ prefix from two Kconfig symbols in a dependency for SMS_SIANO_DEBUGFS. This prefix is invalid inside Kconfig files. Note that the current (common sense) dependency on SMS_USB_DRV and SMS_SDIO_DRV being equal ensures that SMS_SIANO_DEBUGFS will not violate its constraints. These constraint are that: - it should only be built if SMS_USB_DRV is set; - it can't be builtin if USB support is modular. So drop the dependency on SMS_USB_DRV, as it is unneeded. Fixes: 6c84b214 ("[media] sms: fix randconfig building error") Reported-by: Martin Walch <walch.martin@web.de> Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
CrazyCat authored
Geniatech T220 init fixed - reset cmd from windows driver and fixed TS bus config for cxd2820r. Signed-off-by: Evgeny Plehov <EvgenyPlehov@ukr.net> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
CrazyCat authored
TS clock inversion in config. Signed-off-by: Evgeny Plehov <EvgenyPlehov@ukr.net> Reviewed-by: Antti Palosaari <crope@iki.fi> Acked-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Mauro Carvalho Chehab authored
* .: (268 commits) Linux 3.16-rc6 um: segv: Save regs only in case of a kernel mode fault um: Fix hung task in fix_range_common() um: Ensure that a stub page cannot get unmapped Revert "um: Fix wait_stub_done() error handling" btrfs: test for valid bdev before kobj removal in btrfs_rm_device Btrfs: fix abnormal long waiting in fsync random: check for increase of entropy_count because of signed conversion ARM: EXYNOS: Fix core ID used by platsmp and hotplug code ahci: add support for the Promise FastTrak TX8660 SATA HBA (ahci mode) ARM: at91/dt: add missing clocks property to pwm node in sam9x5.dtsi ARM: at91/dt: fix usb0 clocks definition in sam9n12 dtsi ARM: at91: at91sam9x5: correct typo error for ohci clock irqchip: gic: Fix core ID calculation when topology is read from DT GFS2: fs/gfs2/rgrp.c: kernel-doc warning fixes GFS2: memcontrol: Spelling s/invlidate/invalidate/ GFS2: Allow caching of glocks for flock GFS2: Allow flocks to use normal glock dq rather than dq_wait GFS2: replace count*size kzalloc by kcalloc GFS2: Use GFP_NOFS when allocating glocks ... Conflicts: drivers/media/dvb-frontends/si2168.c drivers/media/dvb-frontends/si2168_priv.h drivers/media/tuners/si2157.c
-
Mauro Carvalho Chehab authored
As reported by Kbuildtest: drivers/media/v4l2-core/v4l2-subdev.c: In function 'check_format': drivers/media/v4l2-core/v4l2-subdev.c:136:23: error: 'struct v4l2_subdev' has no member named 'entity' if (format->pad >= sd->entity.num_pads) ^ drivers/media/v4l2-core/v4l2-subdev.c: In function 'check_crop': drivers/media/v4l2-core/v4l2-subdev.c:148:21: error: 'struct v4l2_subdev' has no member named 'entity' if (crop->pad >= sd->entity.num_pads) ^ drivers/media/v4l2-core/v4l2-subdev.c: In function 'check_selection': drivers/media/v4l2-core/v4l2-subdev.c:161:20: error: 'struct v4l2_subdev' has no member named 'entity' if (sel->pad >= sd->entity.num_pads) ^ drivers/media/v4l2-core/v4l2-subdev.c: In function 'check_edid': drivers/media/v4l2-core/v4l2-subdev.c:169:21: error: 'struct v4l2_subdev' has no member named 'entity' if (edid->pad >= sd->entity.num_pads) ^ drivers/media/v4l2-core/v4l2-subdev.c: In function 'subdev_do_ioctl': >> drivers/media/v4l2-core/v4l2-subdev.c:186:6: warning: unused variable 'rval' [-Wunused-variable] int rval; ^ drivers/media/v4l2-core/v4l2-subdev.c: At top level: drivers/media/v4l2-core/v4l2-subdev.c:129:12: warning: 'check_format' defined but not used [-Wunused-function] static int check_format(struct v4l2_subdev *sd, ^ drivers/media/v4l2-core/v4l2-subdev.c:142:12: warning: 'check_crop' defined but not used [-Wunused-function] static int check_crop(struct v4l2_subdev *sd, struct v4l2_subdev_crop *crop) ^ drivers/media/v4l2-core/v4l2-subdev.c:154:12: warning: 'check_selection' defined but not used [-Wunused-function] static int check_selection(struct v4l2_subdev *sd, ^ drivers/media/v4l2-core/v4l2-subdev.c:167:12: warning: 'check_edid' defined but not used [-Wunused-function] static int check_edid(struct v4l2_subdev *sd, struct v4l2_subdev_edid *edid) The above warnins happen because those functions are used only when the V4L2 subdev API is enabled. Reported-by: kbuild test robot <fengguang.wu@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Antti Palosaari authored
MEDIA_SDR_SUPPORT and I2C_MUX are needed for rtl2832_sdr. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Antti Palosaari authored
Commit 0ba2aeb6 (v4l2-ctrls: increase internal min/max/step/def to 64 bit) changes v4l2 controls to 64-bit. Driver it not working on 32-bit arch as it uses directly control 'step' which is changed to 64-bit. Reported-by: kbuild test robot <fengguang.wu@intel.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Peter Meerwald authored
drivers/built-in.o: In function `isp_video_open': /src/linux/drivers/media/platform/omap3isp/ispvideo.c:1253: undefined reference to `vb2_dma_contig_memops' drivers/built-in.o: In function `omap3isp_video_init': /src/linux/drivers/media/platform/omap3isp/ispvideo.c:1344: undefined reference to `vb2_dma_contig_init_ctx' /src/linux/drivers/media/platform/omap3isp/ispvideo.c:1350: undefined reference to `vb2_dma_contig_cleanup_ctx' drivers/built-in.o: In function `omap3isp_video_cleanup': /src/linux/drivers/media/platform/omap3isp/ispvideo.c:1381: undefined reference to `vb2_dma_contig_cleanup_ctx' make: *** [vmlinux] Error 1 Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Salva Peiró authored
After the zeroing the whole struct struct media_entity_desc u_ent, it is no longer necessary to memset(0) its u_ent.name field. CC: stable@vger.kernel.org Signed-off-by: Salva Peiró <speiro@ai2.upv.es> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Sakari Ailus authored
Separate validation of different argument types. There's no reason to do this separately for every IOCTL. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Laurent Pinchart authored
The bridge driver doesn't support interlaced formats, always return the field order set to V4L2_FIELD_NONE. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Laurent Pinchart authored
The SMIA++ sensors are progressive, always return the field order set to V4L2_FIELD_NONE. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Laurent Pinchart authored
The sensor is progressive, always return the field order set to V4L2_FIELD_NONE. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Laurent Pinchart authored
The sensor is progressive, always return the field order set to V4L2_FIELD_NONE. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Laurent Pinchart authored
The sensor is progressive, always return the field order set to V4L2_FIELD_NONE. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Laurent Pinchart authored
The sensor is progressive, always return the field order set to V4L2_FIELD_NONE. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Dan Carpenter authored
The RSZ_LPF_INT_MASK define is cut and pasted twice so we can remove the second instance. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Lad, Prabhakar authored
this patch fixes following sparse warning, dm365_resizer.c:223:1: warning: symbol 'resizer_calculate_resize_ratios' was not declared. Should it be static? dm365_resizer.c:313:5: warning: symbol 'resizer_configure_output_win' was not declared. Should it be static? Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Lad, Prabhakar authored
This patch fixes following checkpatch warning, media/davinci_vpfe/dm365_ipipe.c:1271: WARNING: Missing a blank line after declarations media/davinci_vpfe/dm365_ipipe.c:1313: WARNING: Missing a blank line after declarations Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Philipp Zabel authored
This switches all register accesses to use regmap. It allows to use the regmap cache, tracing, and debug register dump facilities, and removes the need to open code read-modify-writes. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Philipp Zabel authored
Add support for registering the sensor subdevice using the v4l2-async API. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Philipp Zabel authored
as are mt9v024 and mt9v034. With minimal changes it is possible to support mt9v02[24] with the same driver. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Philipp Zabel authored
The read mode register bits 8 and 9 are set and marked as reserved. Don't clear them. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-