- 06 Jan, 2014 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-nextDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates This series contains updates to i40e only. Anjali provides two cleanups to remove unnecessary code and a fix to resolve debugfs dumping only half the NVM. Then provides a fix to ethtool NVM reads where shadow RAM was used instead of actual NVM reads. Jesse provides a couple of fixes, one removes custom i40e functions which duplicate existing kernel functionality. Second fixes constant cast issues by replacing __constant_htons with htons. Mitch provides a couple of fixes for the VF interfaces in i40e. First provides a fix to guard against VF message races with can cause a panic. Second fix reinitializes the buffer size each time we clean the ARQ, because subsequent messages can be truncated. Lastly adds functionality to enable/disable ICR 0 dynamically. Vasu adds a simple guard against multiple includes of the i40e_txrx.h file. Shannon provides a couple of fixes, first fix swaps a couple of lines around in the error handling if the allocation for the VSI array fails. Second fixes an issue where we try to free the q_vector that has not been setup which can panic the kernel. David provides a patch to save off the point to memory and the length of 2 structs used in the admin queue in order to store all info about allocated kernel memory. Neerav fixes ring allocation where allocation and clearing of rings for a VSI should be using the alloc_queue_pairs and not num_queue_pairs. Then removes the unused define for multi-queue enabled. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Hannes Frederic Sowa authored
macvlan needs vlan_pcpu_stats so make it visible even if compiling without VLAN_8021Q support. Otherwise a very long compiler error happens. Fixes: cdf3e274 ("macvlan: unify macvlan_pcpu_stats and vlan_pcpu_stats") Cc: Li RongQing <roy.qing.li@gmail.com> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-By:
Li RongQing <roy.qing.li@gmail.com> Signed-off-by:
-
Daniel Borkmann authored
netdev_kobject_init() is only being called from __init context, that is, net_dev_init(), so annotate it with __init as well, thus the kernel can take this as a hint that the function is used only during the initialization phase and free up used memory resources after its invocation. Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== netfilter/IPVS updates for net-next The following patchset contains Netfilter updates for your net-next tree, they are: * Add full port randomization support. Some crazy researchers found a way to reconstruct the secure ephemeral ports that are allocated in random mode by sending off-path bursts of UDP packets to overrun the socket buffer of the DNS resolver to trigger retransmissions, then if the timing for the DNS resolution done by a client is larger than usual, then they conclude that the port that received the burst of UDP packets is the one that was opened. It seems a bit aggressive method to me but it seems to work for them. As a result, Daniel Borkmann and Hannes Frederic Sowa came up with a new NAT mode to fully randomize ports using prandom. * Add a new classifier to x_tables based on the socket net_cls set via cgroups. These includes two patches to prepare the field as requested by Zefan Li. Also from Daniel Borkmann. * Use prandom instead of get_random_bytes in several locations of the netfilter code, from Florian Westphal. * Allow to use the CTA_MARK_MASK in ctnetlink when mangling the conntrack mark, also from Florian Westphal. * Fix compilation warning due to unused variable in IPVS, from Geert Uytterhoeven. * Add support for UID/GID via nfnetlink_queue, from Valentina Giusti. * Add IPComp extension to x_tables, from Fan Du. ==================== Signed-off-by:
-
- 05 Jan, 2014 36 commits
-
-
Anjali Singhai Jain authored
Driver needs to clean PBA only when interrupts are turned off and we are polling instead. Change-Id: Ic0c1da761bd3abe7f73b1cc8bcddf8e3a232fd0f Signed-off-by:
Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Anjali Singhai Jain authored
These functions don't need a prototype as they are defined in the file before they are called. Change-Id: Ie17ffad4a29a9c0df434c4ebc4681128a6095c65 Signed-off-by:
-
Neerav Parikh authored
Remove references to I40E_FLAG_MQ_ENABLED from the code as it doesn't seem to be used anywhere. Change-Id: I4c89fb65b2cdd26fbb0c58fccbbb4b03f0e5f1b3 Signed-off-by:
Neerav Parikh <Neerav.Parikh@intel.com> Signed-off-by:
-
Neerav Parikh authored
The allocation and clearing of rings for a VSI should be using the alloc_queue_pairs and not num_queue_pairs. The alloc_queue_pairs per VSI is a pre-allocated number of queues assigned to a VSI; based on number of TCs enabled only certain number of queues may be used from that. This is mainly valid only for the LAN VSI case as that is the only VSI that may be enabled with multiple traffic classes. In the future the number of TCs may change based on DCBX configuration. The actual number of queues that are enabled/configured is based on the number of TCs enabled for a given VSI and that is stored in num_queue_pairs. With this change num_[tr]x_queues is unused so remove them. Change-Id: I9c2f84778bb25f7313c630e9b002a0caa883ce29 Signed-off-by:
-
Shannon Nelson authored
Don't try to free a q_vector that hasn't been set up as it can panic the kernel. Change-Id: I0650cc6c441d0779788c522c790293c276d14fbc Signed-off-by:
Shannon Nelson <shannon.nelson@intel.com> Signed-off-by:
-
David Cassard authored
Save both a pointer to memory and the length in order to store all info about allocated kernel memory. This patch changes some adminq allocations to preserve the full i40e_dma_mem/i40e_virt_mem structs for every allocation. Change-Id: Ibcf96159aba4ba61f839d16d87d19478df28e630 Signed-off-by:
David Cassard <david.g.cassard@intel.com> Signed-off-by:
-
Shannon Nelson authored
Swap a couple lines around in the error handling if the kzalloc() for the pf->vsi array fails. This was causing a kernel BUG because the call to i40e_clear_interrupt_scheme() was assuming the pf->vsi[] array existed. In this fix it is possible that i40e_reset_interrupt_capability() will get called twice, but this is a safe action. Change-Id: I939163ccaa89baac7511556d36bc873864c35ae1 Signed-off-by:
-
Mitch Williams authored
When cleaning the ARQ, we must reinitialize the buffer size each time we go through the loop, because i40e_clean_arq_element returns the message length in the same field. Without this change, subsequent messages can be truncated to the length of the previous message. Change-Id: Ic9c32ff843faf0fc3196d21351a1c3a60c6158eb Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Signed-off-by:
Sibai Li <sibai.li@intel.com> Signed-off-by:
-
Mitch Williams authored
Introduce i40e_irq_dynamic_disable_icr0 and use it and its previously- extant counterpart when appropriate. Change-Id: Ieb4037874fba2e96fc2354b34a97a3cb8f6490f3 Signed-off-by:
-
Vasu Dev authored
Add an include header guard to guard against multiple includes Change-Id: I73efa03efc912d2047edab903c7caed05b444da2 Signed-off-by:
Vasu Dev <vasu.dev@intel.com> Signed-off-by:
-
Mitch Williams authored
When disabling and enabling VFs on a live system with the VF driver loaded, it's possible to receive an admin queue message from the VF driver at an inconvenient time, e.g. when the associated data structures aren't present or configured. This causes a rather inconvenient panic. To guard against this, we change the order of when we set num_alloc_vfs when turning off SR-IOV, and then gate processing of any VF messages based upon that value. Likewise, when enabling VFs, we shut off the relevant interrupt until configuration is complete. Change-Id: I0c172c056616c2bebd78bbc807ab446eb484deea Signed-off-by:
-
Jesse Brandeburg authored
replace __constant_htons with htons Change-Id: I123a5318bae34c8b004c71db07c56f137c685849 Signed-off-by:
-
Anjali Singhai Jain authored
Earlier we were reading Shadow RAM (copy of the NVM) which can differ from the actual NVM. Use AQ instead to read the actual NVM. Change-Id: Ia0f2773b722db77d093f738c068af872be69bbd4 Signed-off-by:
-
Jesse Brandeburg authored
Remove custom i40e functions around ethernet addresses that are duplicating already existing kernel functionality. Also ends up fixing a bug with multicast addresses. Signed-off-by:
-
Anjali Singhai Jain authored
Debugfs was reading exactly half the number of words, fix it. Change-Id: Ieb217f3c6dca455d44e50a0dc61a6664c0cb2265 Signed-off-by:
-
David S. Miller authored
bgmac: add initial support for core rev 4 on ARM BCM47xx ==================== This adds support for core rev 4 and ARM BCM47XX. With an other fix to the platform code I am now getting over 200 MBit/s with this Ethernet driver, the DMA problems are solved are unrelated to bgmac. v3: - moved flags calculation for bcma_core_enable() into if block - remove hard coding of phy address to BGMAC_PHY_NOREGS v2: add changed suggested by Rafał ==================== Signed-off-by: -
Hauke Mehrtens authored
This adds support for the Northstar SoC. This SoC does not have a PMU in bcma and no register on it should be called. In addition it support 2.5 GBit/s Ethernet to the PHY. This GMAC core is not fully working there are still problems with the DMA controller. Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
-
Hauke Mehrtens authored
On the Northstar SoC (BCM4707 and BCM53018) we have to enable all GMAC cores when we just want to use on. We iterate over all the cores and activate them. Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
-
Hauke Mehrtens authored
The BGMAC_CMDCFG_SR register is at a different position on core rev >= 4 We do not know where this register is on a rev 5 or higher core, I have newer seen such a core. Signed-off-by:
-
Hauke Mehrtens authored
The DMA controller used in the device supported by GMAC with core rev >= 4 has some new options which are now set to the default values used in the Broadcom SDK. Signed-off-by:
-
Hauke Mehrtens authored
This function is used to get a specific core when there is more than one core of that specific type. This is used in bgmac to reset all GMAC cores. Signed-off-by:
-
stephen hemminger authored
Remove dead code; tipc_bearer_find_interface tipc_node_redundant_links This may break out of tree version of TIPC if there still is one. But that maybe a good thing :-) Signed-off-by:Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
stephen hemminger authored
Signed-off-by:
-
stephen hemminger authored
Make DCCP module config variable static, only used in one file. Signed-off-by:
-
stephen hemminger authored
This function is defined but not used. Remove it now, can be resurrected if ever needed. Signed-off-by:
-
Li RongQing authored
They are same, so unify them as one; since macvlan is a kind of vlan, vlan_pcpu_stats should be a proper name for vlan and macvlan. Signed-off-by:
-
Li RongQing authored
They are same, so unify them as one, pcpu_sw_netstats. Define pcpu_sw_netstat in netdevice.h, remove pcpu_tstats from if_tunnel and remove br_cpu_netstats from br_private.h Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-nextDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates This series contains updates to i40e and pci_regs.h. Anjali provides a patch to prevent messages from stray HMC events, except at interrupt message level, and refactors the HMC error handling. Catherine adds routines in probe to populate/check PCI bus speed and width, then verify we are in a 8GT/s x8 PCIe slot and warn when we are not. Shannon adds Wake-on-LAN support for i40e, fixes curly brace use as well as return type for i40e_vsi_clear_rings(). Joseph implements receive offload for VXLAN for i40e, where the hardware supports checksum offload/verification of the inner/outer header. Mitch provides the bulk of the changes, where he refactors the VF reset code so that it works on real hardware. Then does code cleanup by calling existing functions to enable and disable queues for VFs and remove unused functions. Removes a unnecessary log messages that are seen at every VF reset, for example complaining about disabling queues that are already disabled. Fixes an error return when the VF asks to add an invalid MAC address and if the VF sends a bad message, make it more informative about what is actually going on. Jesse refactors the LED function to flash LED lights correctly. v2: - removed patch 5 "i40e: add set settings and pauseparam" based on feedback from Ben Hutchings, will re-work that patch for later submission - Added patch "i40e: Implementation of vxlan ndo's" from Joseph to address Or Gerlitz's questions and concerns. This patch adds the implementation for the VXLAN ndo's and allows the hardware to do receive checksum offload for inner packets on the UDP ports that VXLAN notifies us about. - Added patch "i40e: using for_each_set_bit to simplify the code" from Wei Yongjun. This patch uses for_each_set_bit() to simply the code. v3: - fixed indentation issue in patch 11 based on feedback from Sergei Shtylyov. Sorry for the delayed release of v4, it was delayed to the holidays. v4: - Addressed Or Gerlitz's concerns about trying to get a hold of a mutex while holding a spin lock in patch 6 by executing the AQ commands from a subtask. - Addressed David Miller's Kconfig concerns by creating a Kconfig VXLAN option for i40e and wrapped appropriate code with the config option in patch 6. - Updated patch 7 based on the changes made in patch 6 in the above two bullets. v5: - Added the patch to pci_regs.h based on David Miller's feedback to add PCI defines for speed and width - Updated patch 3 description to better explain the changes based on feedback from David Miller - Updated patch 4 to use the newly added defines to pci_regs.h instead of local defines - Updated patch 7 to use <net/vxlan.h> in the #include based on feedback from David Miller ==================== Signed-off-by: -
Sergei Shtylyov authored
phy_scan_fixups() isn't and shouldn't be called by the drivers directly, so unexport it. And since Florian Fainelli's recent patches, the function is only called locally, so we can make it static as well. Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Sergei Shtylyov authored
Remove adjust_state() callback from 'struct phy_device' since it seems to have never been really used from the inception: phy_start_machine() has been always called with 2nd argument equal to NULL. Signed-off-by:
-
Sergei Shtylyov authored
Remove excess empty lines such as those between a function call and its result check and just duplicate ones between functions. Signed-off-by:
-
Sergei Shtylyov authored
Remove some excess code: - convert assignments to initializers; - kill useless assignments before *return*. Signed-off-by:
-
Sergei Shtylyov authored
A number of functions (especially in phy.c) has local variables that were hardly needed in the first place -- remove them. Signed-off-by:
-
Sergei Shtylyov authored
Running 'checkpatch.pl' gives some errors and warnings: - no spaces around =; - * separated by space from the function name; - { in function definition not on a separate line; - line over 80 characters. While fixing these, also fix the following style issues: - file name in the heading comment; - alignment not matching open paren. Signed-off-by: -
Sergei Shtylyov authored
The recent patch from Florian Fainelli fixed all 'checkpatch.pl' errors but left some warnings like: - including <asm/io.h> instead of <linux/io.h>; - including <asm/uaccess.h> instead of <linux/uaccess.h>; - block comments using empty /* line; - 'struct dev_pm_ops' variable not being *const*. While fixing these, also fix the following style issues (some of which were found running 'checkpatch.pl --strict'): - alignment not matching open paren; - file name in the heading comment. Signed-off-by:
-
Sergei Shtylyov authored
The recent patch from Florian Fainelli fixed all 'checkpatch.pl' errors but left the numerous warnings: - including <asm/io.h> instead of <linux/io.h>; - including <asm/uaccess.h> instead of <linux/uaccess.h>; - *extern* declaration in .c file; - block comments using empty /* line; - block comments not starting with * on the middle lines; - block comments not having trailing */ on a separate line; - EXPORT_SYMBOL() not immediately following its function; - unnecessary {} for signle statement block; - spaces before tabs. While fixing these, also fix the following style issues (some of which were found running 'checkpatch.pl --strict'): - alignment not matching open paren; - missing {} on one of the *if* arms where another has them; - use of sizeof(struct structure) instead of sizeof(*variable); - multiple assignments on one line; - empty line before }; - file names in the heading comments; - missing spaces around operators; - no {} around multi-line *if* operator's arm; - unneeded () around subexpressions; - incomplete kernel-doc comment style; - comment line exceeding 80 characters; - missing empty line after declarations. Signed-off-by:
-
