- 18 Jul, 2018 4 commits
-
-
Tetsuo Handa authored
syzbot is reporting stalls at nfc_llcp_send_ui_frame() [1]. This is because nfc_llcp_send_ui_frame() is retrying the loop without any delay when nonblocking nfc_alloc_send_skb() returned NULL. Since there is no need to use MSG_DONTWAIT if we retry until sock_alloc_send_pskb() succeeds, let's use blocking call. Also, in case an unexpected error occurred, let's break the loop if blocking nfc_alloc_send_skb() failed. [1] https://syzkaller.appspot.com/bug?id=4a131cc571c3733e0eff6bc673f4e36ae48f19c6Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by:
syzbot <syzbot+d29d18215e477cfbfbdd@syzkaller.appspotmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
My randconfig builds came across an old missing dependency for ILA: ERROR: "dst_cache_set_ip6" [net/ipv6/ila/ila.ko] undefined! ERROR: "dst_cache_get" [net/ipv6/ila/ila.ko] undefined! ERROR: "dst_cache_init" [net/ipv6/ila/ila.ko] undefined! ERROR: "dst_cache_destroy" [net/ipv6/ila/ila.ko] undefined! We almost never run into this by accident because randconfig builds end up selecting DST_CACHE from some other tunnel protocol, and this one appears to be the only one missing the explicit 'select'. >From all I can tell, this problem first appeared in linux-4.9 when dst_cache support got added to ILA. Fixes: 79ff2fc3 ("ila: Cache a route to translated address") Cc: Tom Herbert <tom@herbertland.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
David Lechner authored
This driver can spam the kernel log with multiple messages of: net eth0: eth0: allmulti set Usually 4 or 8 at a time (probably because of using ConnMan). This message doesn't seem useful, so let's demote it from dev_info() to dev_dbg(). Signed-off-by:David Lechner <david@lechnology.com> Signed-off-by:
-
Alexander Sverdlin authored
octeon_mgmt driver doesn't drop RX frames that are 1-4 bytes bigger than MTU set for the corresponding interface. The problem is in the AGL_GMX_RX0/1_FRM_MAX register setting, which should not account for VLAN tagging. According to Octeon HW manual: "For tagged frames, MAX increases by four bytes for each VLAN found up to a maximum of two VLANs, or MAX + 8 bytes." OCTEON_FRAME_HEADER_LEN "define" is fine for ring buffer management, but should not be used for AGL_GMX_RX0/1_FRM_MAX. The problem could be easily reproduced using "ping" command. If affected system has default MTU 1500, other host (having MTU >= 1504) can successfully "ping" the affected system with payload size 1473-1476, resulting in IP packets of size 1501-1504 accepted by the mgmt driver. Fixed system still accepts IP packets of 1500 bytes even with VLAN tagging, because the limits are lifted in HW as expected, for every VLAN tag. Signed-off-by:
Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by:
-
- 16 Jul, 2018 24 commits
-
-
Ursula Braun authored
SMC ioctl processing requires the sock lock to work properly in all thinkable scenarios. Problem has been found with RaceFuzzer and fixes: KASAN: null-ptr-deref Read in smc_ioctl Reported-by:
Byoungyoung Lee <lifeasageek@gmail.com> Reported-by: syzbot+35b2c5aa76fd398b9fd4@syzkaller.appspotmail.com Signed-off-by:
Ursula Braun <ubraun@linux.ibm.com> Reviewed-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
David S. Miller authored
Siva Reddy Kallam says: ==================== tg3: Update copyright and fix for tx timeout with 5762 First patch: Update copyright Second patch: Add higher cpu clock for 5762 ==================== Signed-off-by: -
Sanjeev Bansal authored
This patch has fix for TX timeout while running bi-directional traffic with 100 Mbps using 5762. Signed-off-by:
Sanjeev Bansal <sanjeevb.bansal@broadcom.com> Signed-off-by:
Siva Reddy Kallam <siva.kallam@broadcom.com> Reviewed-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Siva Reddy Kallam authored
Signed-off-by:
-
John Allen authored
Testing has uncovered a failure case that is not handled properly. In the event that a login fails and we are not able to recover on the spot, we return 0 from do_reset, preventing any error recovery code from being triggered. Additionally, the state is set to "probed" meaning that when we are able to trigger the error recovery, the driver always comes up in the probed state. To handle the case properly, we need to return a failure code here and set the adapter state to the state that we entered the reset in indicating the state that we would like to come out of the recovery reset in. Signed-off-by:
John Allen <jallen@linux.vnet.ibm.com> Signed-off-by:
-
Stefan Wahren authored
The skb size calculation in lan78xx_tx_bh is in race with the start_xmit, which could lead to rare kernel oopses. So protect the whole skb walk with a spin lock. As a benefit we can unlink the skb directly. This patch was tested on Raspberry Pi 3B+ Link: https://github.com/raspberrypi/linux/issues/2608 Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Floris Bos <bos@je-eigen-domein.nl> Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
-
David Ahern authored
Eric reported that reverting the patch that fixed and simplified IPv6 multipath routes means reverting back to invalid userspace notifications. eg., $ ip -6 route add 2001:db8:1::/64 nexthop dev eth0 nexthop dev eth1 only generates a single notification: 2001:db8:1::/64 dev eth0 metric 1024 pref medium While working on a fix for this problem I found another case that is just broken completely - a multipath route with a gateway followed by device followed by gateway: $ ip -6 ro add 2001:db8:103::/64 nexthop via 2001:db8:1::64 nexthop dev dummy2 nexthop via 2001:db8:3::64 In this case the device only route is dropped completely - no notification to userpsace but no addition to the FIB either: $ ip -6 ro ls 2001:db8:1::/64 dev dummy1 proto kernel metric 256 pref medium 2001:db8:2::/64 dev dummy2 proto kernel metric 256 pref medium 2001:db8:3::/64 dev dummy3 proto kernel metric 256 pref medium 2001:db8:103::/64 metric 1024 nexthop via 2001:db8:1::64 dev dummy1 weight 1 nexthop via 2001:db8:3::64 dev dummy3 weight 1 pref medium fe80::/64 dev dummy1 proto kernel metric 256 pref medium fe80::/64 dev dummy2 proto kernel metric 256 pref medium fe80::/64 dev dummy3 proto kernel metric 256 pref medium Really, IPv6 multipath is just FUBAR'ed beyond repair when it comes to device only routes, so do not allow it all. This change will break any scripts relying on the mpath api for insert, but I don't see any other way to handle the permutations. Besides, since the routes are added to the FIB as standalone (non-multipath) routes the kernel is not doing what the user requested, so it might as well tell the user that. Reported-by:Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
David Ahern <dsahern@gmail.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Stefan Baranoff authored
Correct previous bad attempt at allowing sockets to come out of TCP repair without sending window probes. To avoid changing size of the repair variable in struct tcp_sock, this lets the decision for sending probes or not to be made when coming out of repair by introducing two ways to turn it off. v2: * Remove erroneous comment; defines now make behavior clear Fixes: 70b7ff13 ("tcp: allow user to create repair socket without window probes") Signed-off-by:
Stefan Baranoff <sbaranoff@gmail.com> Signed-off-by:
Andrei Vagin <avagin@virtuozzo.com> Signed-off-by:
-
Saeed Mahameed authored
When a new rx packet arrives, the rx path will decide whether to reuse the remainder of the page or not according to one of the below conditions: 1. frag_info->frag_stride == PAGE_SIZE / 2 2. frags->page_offset + frag_info->frag_size > PAGE_SIZE; The first condition is no met for when XDP is set. For XDP, page_offset is always set to priv->rx_headroom which is XDP_PACKET_HEADROOM and frag_info->frag_size is around mtu size + some padding, still the 2nd release condition will hold since XDP_PACKET_HEADROOM + 1536 < PAGE_SIZE, as a result the page will not be released and will be _wrongly_ reused for next free rx descriptor. In XDP there is an assumption to have a page per packet and reuse can break such assumption and might cause packet data corruptions. Fix this by adding an extra condition (!priv->rx_headroom) to the 2nd case to avoid page reuse when XDP is set, since rx_headroom is set to 0 for non XDP setup and set to XDP_PACKET_HEADROOM for XDP setup. No additional cache line is required for the new condition. Fixes: 34db548b ("mlx4: add page recycling in receive path") Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Suggested-by:
Martin KaFai Lau <kafai@fb.com> CC: Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Randy Dunlap authored
CC [M] drivers/net/ethernet/freescale/fman/fman.o In file included from ../drivers/net/ethernet/freescale/fman/fman.c:35: ../include/linux/fsl/guts.h: In function 'guts_set_dmacr': ../include/linux/fsl/guts.h:165:2: error: implicit declaration of function 'clrsetbits_be32' [-Werror=implicit-function-declaration] clrsetbits_be32(&guts->dmacr, 3 << shift, device << shift); ^~~~~~~~~~~~~~~ Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Madalin Bucur <madalin.bucur@nxp.com> Cc: netdev@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by:
-
Stephen Hemminger authored
The netvsc device may need to fallback to running in single queue mode if host side only wants to support single queue. Recent change for handling mtu broke this in setup logic. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Fixes: 3ffe64f1 ("hv_netvsc: split sub-channel setup into async and sync") Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
-
Thomas Falcon authored
During a device failover, there may be latency between the loss of the current backing device and a notification from firmware that a failover has occurred. This latency can result in a large amount of error printouts as firmware returns outgoing traffic with a generic error code. These are not necessarily errors in this case as the firmware is busy swapping in a new backing adapter and is not ready to send packets yet. This patch reclassifies those error codes as warnings with an explanation that a failover may be pending. All other return codes will be considered errors. Signed-off-by:
Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by:
-
Sabrina Dubroca authored
Commit adc176c5 ("ipv6 addrconf: Implemented enhanced DAD (RFC7527)") added enhanced DAD with a nonce length of 6 bytes. However, RFC7527 doesn't specify the length of the nonce, other than being 6 + 8*k bytes, with integer k >= 0 (RFC3971 5.3.2). The current implementation simply assumes that the nonce will always be 6 bytes, but others systems are free to choose different sizes. If another system sends a nonce of different length but with the same 6 bytes prefix, it shouldn't be considered as the same nonce. Thus, check that the length of the received nonce is the same as the length we sent. Ugly scapy test script running on veth0: def loop(): pkt=sniff(iface="veth0", filter="icmp6", count=1) pkt = pkt[0] b = bytearray(pkt[Raw].load) b[1] += 1 b += b'\xde\xad\xbe\xef\xde\xad\xbe\xef' pkt[Raw].load = bytes(b) pkt[IPv6].plen += 8 # fixup checksum after modifying the payload pkt[IPv6].payload.cksum -= 0x3b44 if pkt[IPv6].payload.cksum < 0: pkt[IPv6].payload.cksum += 0xffff sendp(pkt, iface="veth0") This should result in DAD failure for any address added to veth0's peer, but is currently ignored. Fixes: adc176c5 ("ipv6 addrconf: Implemented enhanced DAD (RFC7527)") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Reviewed-by:
-
Corentin Labbe authored
This patch remove the following documentation warning drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c:103: warning: Excess function parameter 'priv' description in 'stmmac_axi_setup' It was introduced in commit afea0365 ("stmmac: rework DMA bus setting and introduce new platform AXI structure") Signed-off-by:
Corentin Labbe <clabbe@baylibre.com> Signed-off-by:
-
Corentin Labbe authored
This patch fix a typo in the word Describe Signed-off-by:
-
Prashant Bhole authored
A KASAN:use-after-free bug was found related to ip6-erspan while running selftests/net/ip6_gre_headroom.sh It happens because of following sequence: - ipv6hdr pointer is obtained from skb - skb_cow_head() is called, skb->head memory is reallocated - old data is accessed using ipv6hdr pointer skb_cow_head() call was added in e41c7c68 ("ip6erspan: make sure enough headroom at xmit."), but looking at the history there was a chance of similar bug because gre_handle_offloads() and pskb_trim() can also reallocate skb->head memory. Fixes tag points to commit which introduced possibility of this bug. This patch moves ipv6hdr pointer assignment after skb_cow_head() call. Fixes: 5a963eb6 ("ip6_gre: Add ERSPAN native tunnel support") Signed-off-by:
Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Reviewed-by:
Greg Rose <gvrose8192@gmail.com> Acked-by:
William Tu <u9012063@gmail.com> Signed-off-by:
-
Toshiaki Makita authored
On XDP_TX we need to free up the frame only when tun_xdp_tx() returns a negative value. A positive value indicates that the packet is successfully enqueued to the ptr_ring, so freeing the page causes use-after-free. Fixes: 735fc405 ("xdp: change ndo_xdp_xmit API to support bulking") Signed-off-by:
Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
Masanari Iida authored
This patch fixes a spelling typo in bonding.txt Signed-off-by:
Masanari Iida <standby24x7@gmail.com> Signed-off-by:
-
Dave Watson authored
In the zerocopy sendmsg() path, there are error checks to revert the zerocopy if we get any error code. syzkaller has discovered that tls_push_record can return -ECONNRESET, which is fatal, and happens after the point at which it is safe to revert the iter, as we've already passed the memory to do_tcp_sendpages. Previously this code could return -ENOMEM and we would want to revert the iter, but AFAIK this no longer returns ENOMEM after a447da7d ("tls: fix waitall behavior in tls_sw_recvmsg"), so we fail for all error codes. Reported-by: syzbot+c226690f7b3126c5ee04@syzkaller.appspotmail.com Reported-by: syzbot+709f2810a6a05f11d4d3@syzkaller.appspotmail.com Signed-off-by:
Dave Watson <davejwatson@fb.com> Fixes: 3c4d7559 ("tls: kernel TLS support") Signed-off-by:
-
Constantine Shulyupin authored
Signed-off-by:
Constantine Shulyupin <const@MakeLinux.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Eric Biggers authored
My recent fix for dns_resolver_preparse() printing very long strings was incomplete, as shown by syzbot which still managed to hit the WARN_ONCE() in set_precision() by adding a crafted "dns_resolver" key: precision 50001 too large WARNING: CPU: 7 PID: 864 at lib/vsprintf.c:2164 vsnprintf+0x48a/0x5a0 The bug this time isn't just a printing bug, but also a logical error when multiple options ("#"-separated strings) are given in the key payload. Specifically, when separating an option string into name and value, if there is no value then the name is incorrectly considered to end at the end of the key payload, rather than the end of the current option. This bypasses validation of the option length, and also means that specifying multiple options is broken -- which presumably has gone unnoticed as there is currently only one valid option anyway. A similar problem also applied to option values, as the kstrtoul() when parsing the "dnserror" option will read past the end of the current option and into the next option. Fix these bugs by correctly computing the length of the option name and by copying the option value, null-terminated, into a temporary buffer. Reproducer for the WARN_ONCE() that syzbot hit: perl -e 'print "#A#", "\0" x 50000' | keyctl padd dns_resolver desc @s Reproducer for "dnserror" option being parsed incorrectly (expected behavior is to fail when seeing the unknown option "foo", actual behavior was to read the dnserror value as "1#foo" and fail there): perl -e 'print "#dnserror=1#foo\0"' | keyctl padd dns_resolver desc @s Reported-by:syzbot <syzkaller@googlegroups.com> Fixes: 4a2d7892 ("DNS: If the DNS server returns an error, allow that to be cached [ver #2]") Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
David S. Miller authored
Hangbin Liu says: ==================== multicast: init as INCLUDE when join SSM INCLUDE group Based on RFC3376 5.1 and RFC3810 6.1, we should init as INCLUDE when join SSM INCLUDE group. In my first version I only clear the group change record. But this is not enough as when a new group join, it will init as EXCLUDE and trigger an filter mode change in ip/ip6_mc_add_src(), which will clear all source addresses' sf_crcount. This will prevent early joined address sending state change records if multi source addresses joined at the same time. In this v2 patchset, I fixed it by directly initializing the mode to INCLUDE for SSM JOIN_SOURCE_GROUP. I also split the original patch into two separated patches for IPv4 and IPv6. Test: test by myself and customer. ==================== Signed-off-by: -
Hangbin Liu authored
This an IPv6 version patch of "ipv4/igmp: init group mode as INCLUDE when join source group". From RFC3810, part 6.1: If no per-interface state existed for that multicast address before the change (i.e., the change consisted of creating a new per-interface record), or if no state exists after the change (i.e., the change consisted of deleting a per-interface record), then the "non-existent" state is considered to have an INCLUDE filter mode and an empty source list. Which means a new multicast group should start with state IN(). Currently, for MLDv2 SSM JOIN_SOURCE_GROUP mode, we first call ipv6_sock_mc_join(), then ip6_mc_source(), which will trigger a TO_IN() message instead of ALLOW(). The issue was exposed by commit a052517a ("net/multicast: should not send source list records when have filter mode change"). Before this change, we sent both ALLOW(A) and TO_IN(A). Now, we only send TO_IN(A). Fix it by adding a new parameter to init group mode. Also add some wrapper functions to avoid changing too much code. v1 -> v2: In the first version I only cleared the group change record. But this is not enough. Because when a new group join, it will init as EXCLUDE and trigger a filter mode change in ip/ip6_mc_add_src(), which will clear all source addresses sf_crcount. This will prevent early joined address sending state change records if multi source addressed joined at the same time. In v2 patch, I fixed it by directly initializing the mode to INCLUDE for SSM JOIN_SOURCE_GROUP. I also split the original patch into two separated patches for IPv4 and IPv6. There is also a difference between v4 and v6 version. For IPv6, when the interface goes down and up, we will send correct state change record with unspecified IPv6 address (::) with function ipv6_mc_up(). But after DAD is completed, we resend the change record TO_IN() in mld_send_initial_cr(). Fix it by sending ALLOW() for INCLUDE mode in mld_send_initial_cr(). Fixes: a052517a ("net/multicast: should not send source list records when have filter mode change") Reviewed-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Hangbin Liu authored
Based on RFC3376 5.1 If no interface state existed for that multicast address before the change (i.e., the change consisted of creating a new per-interface record), or if no state exists after the change (i.e., the change consisted of deleting a per-interface record), then the "non-existent" state is considered to have a filter mode of INCLUDE and an empty source list. Which means a new multicast group should start with state IN(). Function ip_mc_join_group() works correctly for IGMP ASM(Any-Source Multicast) mode. It adds a group with state EX() and inits crcount to mc_qrv, so the kernel will send a TO_EX() report message after adding group. But for IGMPv3 SSM(Source-specific multicast) JOIN_SOURCE_GROUP mode, we split the group joining into two steps. First we join the group like ASM, i.e. via ip_mc_join_group(). So the state changes from IN() to EX(). Then we add the source-specific address with INCLUDE mode. So the state changes from EX() to IN(A). Before the first step sends a group change record, we finished the second step. So we will only send the second change record. i.e. TO_IN(A). Regarding the RFC stands, we should actually send an ALLOW(A) message for SSM JOIN_SOURCE_GROUP as the state should mimic the 'IN() to IN(A)' transition. The issue was exposed by commit a052517a ("net/multicast: should not send source list records when have filter mode change"). Before this change, we used to send both ALLOW(A) and TO_IN(A). After this change we only send TO_IN(A). Fix it by adding a new parameter to init group mode. Also add new wrapper functions so we don't need to change too much code. v1 -> v2: In my first version I only cleared the group change record. But this is not enough. Because when a new group join, it will init as EXCLUDE and trigger an filter mode change in ip/ip6_mc_add_src(), which will clear all source addresses' sf_crcount. This will prevent early joined address sending state change records if multi source addressed joined at the same time. In v2 patch, I fixed it by directly initializing the mode to INCLUDE for SSM JOIN_SOURCE_GROUP. I also split the original patch into two separated patches for IPv4 and IPv6. Fixes: a052517a ("net/multicast: should not send source list records when have filter mode change") Reviewed-by:
-
- 14 Jul, 2018 5 commits
-
-
David S. Miller authored
Yuchung Cheng says: ==================== fix DCTCP delayed ACK This patch series addresses the issue that sometimes DCTCP fail to acknowledge the latest sequence and result in sender timeout if inflight is small. ==================== Signed-off-by: -
Yuchung Cheng authored
After fixing the way DCTCP tracking delayed ACKs, the delayed-ACK related callbacks are no longer needed Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Lawrence Brakmo <brakmo@fb.com> Signed-off-by:
-
Yuchung Cheng authored
Previously, when a data segment was sent an ACK was piggybacked on the data segment without generating a CA_EVENT_NON_DELAYED_ACK event to notify congestion control modules. So the DCTCP ca->delayed_ack_reserved flag could incorrectly stay set when in fact there were no delayed ACKs being reserved. This could result in sending a special ECN notification ACK that carries an older ACK sequence, when in fact there was no need for such an ACK. DCTCP keeps track of the delayed ACK status with its own separate state ca->delayed_ack_reserved. Previously it may accidentally cancel the delayed ACK without updating this field upon sending a special ACK that carries a older ACK sequence. This inconsistency would lead to DCTCP receiver never acknowledging the latest data until the sender times out and retry in some cases. Packetdrill script (provided by Larry Brakmo) 0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 0.000 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 0.000 setsockopt(3, SOL_TCP, TCP_CONGESTION, "dctcp", 5) = 0 0.000 bind(3, ..., ...) = 0 0.000 listen(3, 1) = 0 0.100 < [ect0] SEW 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7> 0.100 > SE. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 8> 0.110 < [ect0] . 1:1(0) ack 1 win 257 0.200 accept(3, ..., ...) = 4 0.200 < [ect0] . 1:1001(1000) ack 1 win 257 0.200 > [ect01] . 1:1(0) ack 1001 0.200 write(4, ..., 1) = 1 0.200 > [ect01] P. 1:2(1) ack 1001 0.200 < [ect0] . 1001:2001(1000) ack 2 win 257 0.200 write(4, ..., 1) = 1 0.200 > [ect01] P. 2:3(1) ack 2001 0.200 < [ect0] . 2001:3001(1000) ack 3 win 257 0.200 < [ect0] . 3001:4001(1000) ack 3 win 257 0.200 > [ect01] . 3:3(0) ack 4001 0.210 < [ce] P. 4001:4501(500) ack 3 win 257 +0.001 read(4, ..., 4500) = 4500 +0 write(4, ..., 1) = 1 +0 > [ect01] PE. 3:4(1) ack 4501 +0.010 < [ect0] W. 4501:5501(1000) ack 4 win 257 // Previously the ACK sequence below would be 4501, causing a long RTO +0.040~+0.045 > [ect01] . 4:4(0) ack 5501 // delayed ack +0.311 < [ect0] . 5501:6501(1000) ack 4 win 257 // More data +0 > [ect01] . 4:4(0) ack 6501 // now acks everything +0.500 < F. 9501:9501(0) ack 4 win 257 Reported-by:
-
Dan Carpenter authored
We accidentally left out the error handling for kstrtoul(). Fixes: a520030e ("qlcnic: Implement flash sysfs callback for 83xx adapter") Signed-off-by:
-
Michael Heimpold authored
Signed-off-by:
Michael Heimpold <mhei@heimpold.de> Signed-off-by:
-
- 13 Jul, 2018 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2018-07-13 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix AF_XDP TX error reporting before final kernel release such that it becomes consistent between copy mode and zero-copy, from Magnus. 2) Fix three different syzkaller reported issues: oob due to ld_abs rewrite with too large offset, another oob in l3 based skb test run and a bug leaving mangled prog in subprog JITing error path, from Daniel. 3) Fix BTF handling for bitfield extraction on big endian, from Okash. 4) Fix a missing linux/errno.h include in cgroup/BPF found by kbuild bot, from Roman. 5) Fix xdp2skb_meta.sh sample by using just command names instead of absolute paths for tc and ip and allow them to be redefined, from Taeung. 6) Fix availability probing for BPF seg6 helpers before final kernel ships so they can be detected at prog load time, from Mathieu. ==================== Signed-off-by: -
Stefano Brivio authored
Commit 8b700862 ("net: Don't copy pfmemalloc flag in __copy_skb_header()") introduced a different handling for the pfmemalloc flag in copy and clone paths. In __skb_clone(), now, the flag is set only if it was set in the original skb, but not cleared if it wasn't. This is wrong and might lead to socket buffers being flagged with pfmemalloc even if the skb data wasn't allocated from pfmemalloc reserves. Copy the flag instead of ORing it. Reported-by:
-
Daniel Borkmann authored
Magnus Karlsson says: ==================== This patch set adjusts the AF_XDP TX error reporting so that it becomes consistent between copy mode and zero-copy. First some background: Copy-mode for TX uses the SKB path in which the action of sending the packet is performed from process context using the sendmsg syscall. Completions are usually done asynchronously from NAPI mode by using a TX interrupt. In this mode, send errors can be returned back through the syscall. In zero-copy mode both the sending of the packet and the completions are done asynchronously from NAPI mode for performance reasons. In this mode, the sendmsg syscall only makes sure that the TX NAPI loop will be run that performs both the actions of sending and completing. In this mode it is therefore not possible to return errors through the sendmsg syscall as the sending is done from the NAPI loop. Note that it is possible to implement a synchronous send with our API, but in our benchmarks that made the TX performance drop by nearly half due to synchronization requirements and cache line bouncing. But for some netdevs this might be preferable so let us leave it up to the implementation to decide. The problem is that the current code base returns some errors in copy-mode that are not possible to return in zero-copy mode. This patch set aligns them so that the two modes always return the same error code. We achieve this by removing some of the errors returned by sendmsg in copy-mode (and in one case adding an error message for zero-copy mode) and offering alternative error detection methods that are consistent between the two modes. The structure of the patch set is as follows: Patch 1: removes the ENXIO return code from copy-mode when someone has forcefully changed the number of queues on the device so that the queue bound to the socket is no longer available. Just silently stop sending anything as in zero-copy mode. Patch 2: stop returning EAGAIN in copy mode when the completion queue is full as zero-copy does not do this. Instead this situation can be detected by comparing the head and tail pointers of the completion queue in both modes. In any case, EAGAIN was not the correct error code here since no amount of calling sendmsg will solve the problem. Only consuming one or more messages on the completion queue will fix this. Patch 3: Always return ENOBUFS from sendmsg if there is no TX queue configured. This was not the case for zero-copy mode. Patch 4: stop returning EMSGSIZE when the size of the packet is larger than the MTU. Just send it to the device so that it will drop it as in zero-copy mode. Note that copy-mode can still return EAGAIN in certain circumstances, but as these conditions cannot occur in zero-copy mode it is fine for copy-mode to return them. ==================== Acked-by:
-
Magnus Karlsson authored
This patch stops returning EMSGSIZE from sendmsg in copy mode when the size of the packet is larger than the MTU. Just send it to the device so that it will drop it as in zero-copy mode. This makes the error reporting consistent between copy mode and zero-copy mode. Fixes: 35fcde7f ("xsk: support for Tx") Signed-off-by:
Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by:
-
Magnus Karlsson authored
This patch makes sure ENOBUFS is always returned from sendmsg if there is no TX queue configured. This was not the case for zero-copy mode. With this patch this error reporting is consistent between copy mode and zero-copy mode. Fixes: ac98d8aa ("xsk: wire upp Tx zero-copy functions") Signed-off-by:
-
Magnus Karlsson authored
This patch stops returning EAGAIN in TX copy mode when the completion queue is full as zero-copy does not do this. Instead this situation can be detected by comparing the head and tail pointers of the completion queue in both modes. In any case, EAGAIN was not the correct error code here since no amount of calling sendmsg will solve the problem. Only consuming one or more messages on the completion queue will fix this. With this patch, the error reporting becomes consistent between copy mode and zero-copy mode. Fixes: 35fcde7f ("xsk: support for Tx") Signed-off-by:
-
Magnus Karlsson authored
This patch removes the ENXIO return code from TX copy-mode when someone has forcefully changed the number of queues on the device so that the queue bound to the socket is no longer available. Just silently stop sending anything as in zero-copy mode so the error reporting gets consistent between the two modes. Fixes: 35fcde7f ("xsk: support for Tx") Signed-off-by:
-
