- 05 Sep, 2017 4 commits
-
-
Jerome Brunet authored
Changing the card voltage on the nanopi-k2 is not instantaneous, especially when switching from 3.3v to 1.8v. It take at least 3ms for the regulator to go from 3.3v to 1.8v. Add margin to that to make sure we don't upset the sdcard during the voltage switch Fixes: 9bc7ffb0 ("arm64: dts: amlogic: Add NanoPi K2") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
-
Jerome Brunet authored
Add the pinctrl to switch mmc clk pins in gpio (pulled down) mode. This is necessary to be able to gate the clk outside of the SoC while keeping it running in the controller Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
-
Jerome Brunet authored
It does not make much sense to define cap-sd-highspeed in the emmc nodes Just remove it. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
-
Jerome Brunet authored
Now that the clock source 0 is properly described in the CCF, use it instead of assuming the default value (xtal) Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
-
- 22 Aug, 2017 5 commits
-
-
Neil Armstrong authored
This patch describes the GPIO lines usage on the LibreTech CC board. This is useful in the debugfs gpio file and using the cdev gpio API. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [khilman: minor whiespace fix] Signed-off-by: Kevin Hilman <khilman@baylibre.com>
-
Kevin Hilman authored
Linux 4.13-rc4
-
Neil Armstrong authored
This patch adds the AO CEC node in all the HDMI enabled boards DTS. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
-
Neil Armstrong authored
The AO clkc needs to be updated to new bindings with an system control parent node and moving the clkc node as subnode. Also adds the SoC specific compatible following the bindings requirements. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
-
git://github.com/BayLibre/clk-mesonKevin Hilman authored
Amlogic clock headers updates for 4.14 * meson8b: add the reset controller to the clkc * meson: expose all clk ids * gxbb-aoclk: Add CEC 32k clock * gxbb: add mmc input 0 clocks * meson: fix protection against undefined clks * tag 'meson-clk-headers-for-4.14' of git://github.com/BayLibre/clk-meson: dt-bindings: clock: gxbb-aoclk: Add CEC 32k clock clk: meson: gxbb: Add sd_emmc clk0 clkids clk: meson-gxbb: expose almost every clock in the bindings clk: meson8b: expose every clock in the bindings clk: meson: gxbb: fix protection against undefined clks clk: meson: meson8b: fix protection against undefined clks dt-bindings: clock: meson8b: describe the embedded reset controller
-
- 08 Aug, 2017 1 commit
-
-
Helmut Klein authored
This patch switches to the stable UART bindings but also add the correct gate clock to the non-AO UART nodes for GXBB and GXL SoCs. Acked-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Helmut Klein <hgkr.klein@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
-
- 07 Aug, 2017 1 commit
-
-
Linus Torvalds authored
-
- 06 Aug, 2017 14 commits
-
-
git://git.infradead.org/linux-platform-drivers-x86Linus Torvalds authored
Pull x86 platform driver fix from Darren Hart: "Fix loop preventing some platforms from waking up via the power button in s2idle: - intel-vbtn: match power button on press rather than release" * tag 'platform-drivers-x86-v4.13-4' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: intel-vbtn: match power button on press rather than release
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "A large number of ext4 bug fixes and cleanups for v4.13" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix copy paste error in ext4_swap_extents() ext4: fix overflow caused by missing cast in ext4_resize_fs() ext4, project: expand inode extra size if possible ext4: cleanup ext4_expand_extra_isize_ea() ext4: restructure ext4_expand_extra_isize ext4: fix forgetten xattr lock protection in ext4_expand_extra_isize ext4: make xattr inode reads faster ext4: inplace xattr block update fails to deduplicate blocks ext4: remove unused mode parameter ext4: fix warning about stack corruption ext4: fix dir_nlink behaviour ext4: silence array overflow warning ext4: fix SEEK_HOLE/SEEK_DATA for blocksize < pagesize ext4: release discard bio after sending discard commands ext4: convert swap_inode_data() over to use swap() on most of the fields ext4: error should be cleared if ea_inode isn't added to the cache ext4: Don't clear SGID when inheriting ACLs ext4: preserve i_mode if __ext4_set_acl() fails ext4: remove unused metadata accounting variables ext4: correct comment references to ext4_ext_direct_IO()
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS fixes from Ralf Baechle: "This fixes two build issues for ralink platforms, both due to missing #includes which used to be included indirectly via other headers" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: ralink: mt7620: Add missing header MIPS: ralink: Fix build error due to missing header
-
Dmitry V. Levin authored
The latest change of compat_sys_sigpending in commit 8f13621a ("sigpending(): move compat to native") has broken it in two ways. First, it tries to write 4 bytes more than userspace expects: sizeof(old_sigset_t) == sizeof(long) == 8 instead of sizeof(compat_old_sigset_t) == sizeof(u32) == 4. Second, on big endian architectures these bytes are being written in the wrong order. This bug was found by strace test suite. Reported-by: Anatoly Pugachev <matorola@gmail.com> Inspired-by: Eugene Syromyatnikov <evgsyr@gmail.com> Fixes: 8f13621a ("sigpending(): move compat to native") Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Maninder Singh authored
This bug was found by a static code checker tool for copy paste problems. Signed-off-by: Maninder Singh <maninder1.s@samsung.com> Signed-off-by: Vaneet Narang <v.narang@samsung.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-
Jerry Lee authored
On a 32-bit platform, the value of n_blcoks_count may be wrong during the file system is resized to size larger than 2^32 blocks. This may caused the superblock being corrupted with zero blocks count. Fixes: 1c6bd717Signed-off-by: Jerry Lee <jerrylee@qnap.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org # 3.7+
-
Miao Xie authored
When upgrading from old format, try to set project id to old file first time, it will return EOVERFLOW, but if that file is dirtied(touch etc), changing project id will be allowed, this might be confusing for users, we could try to expand @i_extra_isize here too. Reported-by: Zhang Yi <yi.zhang@huawei.com> Signed-off-by: Miao Xie <miaoxie@huawei.com> Signed-off-by: Wang Shilong <wshilong@ddn.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-
Miao Xie authored
Clean up some goto statement, make ext4_expand_extra_isize_ea() clearer. Signed-off-by: Miao Xie <miaoxie@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Wang Shilong <wshilong@ddn.com>
-
Miao Xie authored
Current ext4_expand_extra_isize just tries to expand extra isize, if someone is holding xattr lock or some check fails, it will give up. So rename its name to ext4_try_to_expand_extra_isize. Besides that, we clean up unnecessary check and move some relative checks into it. Signed-off-by: Miao Xie <miaoxie@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Wang Shilong <wshilong@ddn.com>
-
Miao Xie authored
We should avoid the contention between the i_extra_isize update and the inline data insertion, so move the xattr trylock in front of i_extra_isize update. Signed-off-by: Miao Xie <miaoxie@huawei.com> Reviewed-by: Wang Shilong <wshilong@ddn.com>
-
Tahsin Erdogan authored
ext4_xattr_inode_read() currently reads each block sequentially while waiting for io operation to complete before moving on to the next block. This prevents request merging in block layer. Add a ext4_bread_batch() function that starts reads for all blocks then optionally waits for them to complete. A similar logic is used in ext4_find_entry(), so update that code to use the new function. Signed-off-by: Tahsin Erdogan <tahsin@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-
Tahsin Erdogan authored
When an xattr block has a single reference, block is updated inplace and it is reinserted to the cache. Later, a cache lookup is performed to see whether an existing block has the same contents. This cache lookup will most of the time return the just inserted entry so deduplication is not achieved. Running the following test script will produce two xattr blocks which can be observed in "File ACL: " line of debugfs output: mke2fs -b 1024 -I 128 -F -O extent /dev/sdb 1G mount /dev/sdb /mnt/sdb touch /mnt/sdb/{x,y} setfattr -n user.1 -v aaa /mnt/sdb/x setfattr -n user.2 -v bbb /mnt/sdb/x setfattr -n user.1 -v aaa /mnt/sdb/y setfattr -n user.2 -v bbb /mnt/sdb/y debugfs -R 'stat x' /dev/sdb | cat debugfs -R 'stat y' /dev/sdb | cat This patch defers the reinsertion to the cache so that we can locate other blocks with the same contents. Signed-off-by: Tahsin Erdogan <tahsin@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Andreas Dilger <adilger@dilger.ca>
-
Tahsin Erdogan authored
ext4_alloc_file_blocks() does not use its mode parameter. Remove it. Signed-off-by: Tahsin Erdogan <tahsin@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-
Arnd Bergmann authored
After commit 62d1034f53e3 ("fortify: use WARN instead of BUG for now"), we get a warning about possible stack overflow from a memcpy that was not strictly bounded to the size of the local variable: inlined from 'ext4_mb_seq_groups_show' at fs/ext4/mballoc.c:2322:2: include/linux/string.h:309:9: error: '__builtin_memcpy': writing between 161 and 1116 bytes into a region of size 160 overflows the destination [-Werror=stringop-overflow=] We actually had a bug here that would have been found by the warning, but it was already fixed last year in commit 30a9d7af ("ext4: fix stack memory corruption with 64k block size"). This replaces the fixed-length structure on the stack with a variable-length structure, using the correct upper bound that tells the compiler that everything is really fine here. I also change the loop count to check for the same upper bound for consistency, but the existing code is already correct here. Note that while clang won't allow certain kinds of variable-length arrays in structures, this particular instance is fine, as the array is at the end of the structure, and the size is strictly bounded. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-
- 05 Aug, 2017 7 commits
-
-
Andreas Dilger authored
The dir_nlink feature has been enabled by default for new ext4 filesystems since e2fsprogs-1.41 in 2008, and was automatically enabled by the kernel for older ext4 filesystems since the dir_nlink feature was added with ext4 in kernel 2.6.28+ when the subdirectory count exceeded EXT4_LINK_MAX-1. Automatically adding the file system features such as dir_nlink is generally frowned upon, since it could cause the file system to not be mountable on older kernel, thus preventing the administrator from rolling back to an older kernel if necessary. In this case, the administrator might also want to disable the feature because glibc's fts_read() function does not correctly optimize directory traversal for directories that use st_nlinks field of 1 to indicate that the number of links in the directory are not tracked by the file system, and could fail to traverse the full directory hierarchy. Fortunately, in the past ten years very few users have complained about incomplete file system traversal by glibc's fts_read(). This commit also changes ext4_inc_count() to allow i_nlinks to reach the full EXT4_LINK_MAX links on the parent directory (including "." and "..") before changing i_links_count to be 1. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196405Signed-off-by: Andreas Dilger <adilger@dilger.ca> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-
Dan Carpenter authored
I get a static checker warning: fs/ext4/ext4.h:3091 ext4_set_de_type() error: buffer overflow 'ext4_type_by_mode' 15 <= 15 It seems unlikely that we would hit this read overflow in real life, but it's also simple enough to make the array 16 bytes instead of 15. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-
Jan Kara authored
ext4_find_unwritten_pgoff() does not properly handle a situation when starting index is in the middle of a page and blocksize < pagesize. The following command shows the bug on filesystem with 1k blocksize: xfs_io -f -c "falloc 0 4k" \ -c "pwrite 1k 1k" \ -c "pwrite 3k 1k" \ -c "seek -a -r 0" foo In this example, neither lseek(fd, 1024, SEEK_HOLE) nor lseek(fd, 2048, SEEK_DATA) will return the correct result. Fix the problem by neglecting buffers in a page before starting offset. Reported-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jan Kara <jack@suse.cz> CC: stable@vger.kernel.org # 3.8+
-
Mario Limonciello authored
This fixes a problem where the system gets stuck in a loop unable to wakeup via power button in s2idle. The problem happens because: - press power button: - system emits 0xc0 (power press), event ignored - system emits 0xc1 (power release), event processed, emited as KEY_POWER - set wakeup_mode to true - system goes to s2idle - press power button - system emits 0xc0 (power press), wakeup_mode is true, system wakes - system emits 0xc1 (power release), event processed, emited as KEY_POWER - system goes to s2idle again To avoid this situation, process the presses (which matches what intel-hid does too). Verified on an Dell XPS 9365 Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: "This series is larger than I would like to submit for -rc4. My original intent were to sent it to either -rc2 or -rc3. Unfortunately, due to my vacations, I got a lot of pending stuff after my return, and had to do some biz trips, with prevented me to send this earlier. Several fixes: - some fixes at atomisp staging driver - several gcc 7 warning fixes - cleanup media SVG files, in order to fix PDF build on some distros - fix random Kconfig build of venus driver - some fixes for the venus driver - some changes from semaphone to mutex in ngene's driver - some locking fixes at dib0700 driver - several fixes on ngene's driver and frontends to make it properly support some new boards added on Kernel 4.13 - some fixes to CEC drivers - omap_vout: vrfb: convert to dmaengine - docs-rst: document EBUSY for VIDIOC_S_FMT Please notice that the big diffstat changes here are at the SVG files. Visually, the images look the same, but the file size is now a lot smaller than before, and they don't use some XML tags that would cause them to be badly parsed by some ImageMagick versions, or to require a lot of memory by TeTex, with would break PDF output on some distributions" * tag 'media/v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (68 commits) media: atomisp2: array underflow in imx_enum_frame_size() media: atomisp2: array underflow in ap1302_enum_frame_size() media: atomisp2: Array underflow in atomisp_enum_input() media: platform: davinci: drop VPFE_CMD_S_CCDC_RAW_PARAMS media: platform: davinci: return -EINVAL for VPFE_CMD_S_CCDC_RAW_PARAMS ioctl media: venus: don't abuse dma_alloc for non-DMA allocations media: venus: hfi: fix error handling in hfi_sys_init_done() media: venus: fix compile-test build on non-qcom ARM platform media: venus: mark PM functions as __maybe_unused media: cec-notifier: small improvements media: pulse8-cec: persistent_config should be off by default media: cec: cec_transmit_attempt_done: ignore CEC_TX_STATUS_MAX_RETRIES media: staging: atomisp: array underflow in ioctl media: lirc: LIRC_GET_REC_RESOLUTION should return microseconds media: svg: avoid too long lines media: svg files: simplify files media: selection.svg: simplify the SVG file media: vimc: set id_table for platform drivers media: staging: atomisp: disable warnings with cc-disable-warning media: davinci: variable 'common' set but not used ...
-
Daeho Jeong authored
We've changed the discard command handling into parallel manner. But, in this change, I forgot decreasing the usage count of the bio which was used to send discard request. I'm sorry about that. Fixes: a0154344 ("ext4: send parallel discards on commit completions") Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO fixes from Linus Walleij: - LP87565: set the proper output level for direction_output. - stm32: fix the kernel build by selecting the hierarchical irqdomain symbol properly - this happens to be done in the pin control framework but whatever, it had dependencies to GPIO so we need to apply it here. - Select the hierarchical IRQ domain also for Xgene. - Fix wakeups to work on MXC. - Fix up the device tree binding on Exar that went astray, also add the right bindings. - Fix the unwanted events for edges from the library. - Fix the unbalanced chanined IRQ on the Tegra. * tag 'gpio-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: tegra: fix unbalanced chained_irq_enter/exit gpiolib: skip unwanted events, don't convert them to opposite edge gpio: exar: Use correct property prefix and document bindings gpio: gpio-mxc: Fix: higher 16 GPIOs usable as wake source gpio: xgene-sb: select IRQ_DOMAIN_HIERARCHY pinctrl: stm32: select IRQ_DOMAIN_HIERARCHY instead of depends on gpio: lp87565: Set proper output level and direction for direction_output MAINTAINERS: Add entry for Whiskey Cove PMIC GPIO driver
-
- 04 Aug, 2017 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fixes from Stephen Boyd: "A handful of critical fixes for changes introduce this merge window. - The TI sci_clk_get() API was pretty broken and nobody noticed. - There were some CPUfreq crashes on C.H.I.P devices because we failed to propagate rates up the clk tree. - Also, the Intel Atom PMC clk driver needs to mark a clk critical if the firmware has it enabled already so that audio doesn't get killed on Baytrail. - Gemini devices have a dead serial console because the reset control usage in the serial driver assume one method of reset that gemini doesn't support (this will be fixed in the next version in the reset framework so this is the small fix for -rc series). - Finally we have two rate calculation fixes, one for Exynos and one for Meson SoCs, that fix rate inconsistencies" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: keystone: sci-clk: Fix sci_clk_get clk: meson: mpll: fix mpll0 fractional part ignored clk: samsung: exynos5420: The EPLL rate table corrections clk: sunxi-ng: sun5i: Add clk_set_rate_parent to the CPU clock clk: x86: Do not gate clocks enabled by the firmware clk: gemini: Fix reset regression
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Radim Krčmář: "ARM: - Yet another race with VM destruction plugged - A set of small vgic fixes x86: - Preserve pending INIT - RCU fixes in paravirtual async pf, VM teardown, and VMXOFF emulation - nVMX interrupt injection and dirty tracking fixes - initialize to make UBSAN happy" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: arm/arm64: vgic: Use READ_ONCE fo cmpxchg KVM: nVMX: Fix interrupt window request with "Acknowledge interrupt on exit" KVM: nVMX: mark vmcs12 pages dirty on L2 exit kvm: nVMX: don't flush VMCS12 during VMXOFF or VCPU teardown KVM: nVMX: do not pin the VMCS12 KVM: avoid using rcu_dereference_protected KVM: X86: init irq->level in kvm_pv_kick_cpu_op KVM: X86: Fix loss of pending INIT due to race KVM: async_pf: make rcu irq exit if not triggered from idle task KVM: nVMX: fixes to nested virt interrupt injection KVM: nVMX: do not fill vm_exit_intr_error_code in prepare_vmcs12 KVM: arm/arm64: Handle hva aging while destroying the vm KVM: arm/arm64: PMU: Fix overflow interrupt injection KVM: arm/arm64: Fix bug in advertising KVM_CAP_MSI_DEVID capability
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Thomas Gleixner: "The recent irq core changes unearthed API abuse in the HPET code, which manifested itself in a suspend/resume regression. The fix replaces the cruft with the proper function calls and cures the regression" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/hpet: Cure interface abuse in the resume path
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fix from Thomas Gleixner: "A single fix for a multiplication overflow in the timer code on 32bit systems" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timers: Fix overflow in get_next_timer_interrupt
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Arnd Bergmann: "This comes a bit later than I planned, and as a consequence is a larger than it should be. Most of the changes are devicetree fixes, across lots of platforms: Renesas, Samsung Exynos, Marvell EBU, TI OMAP, Rockchips, Amlogic Meson, Sigma Desings Tango, Allwinner SUNxi and TI Davinci. Also across many platforms, I applied an older series of simple randconfig build fixes. This includes making the CONFIG_MTD_XIP option compile again, which had been broken for many years and probably has not been missed, but it felt wrong to just remove it completely. The only other changes are: - We enable HWSPINLOCK in defconfig to get some Qualcomm boards to work out of the box. - A few regression fixes for Texas Instruments OMAP2+. - A boot regression fix for the Renesas regulator quirk. - A suspend/resume fix for Uniphier SoCs, fixing the resume of the system bus" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits) ARM: dts: tango4: Request RGMII RX and TX clock delays bus: uniphier-system-bus: set up registers when resuming ARM64: dts: marvell: armada-37xx: Fix the number of GPIO on south bridge ARM: shmobile: rcar-gen2: Fix deadlock in regulator quirk arm64: defconfig: enable missing HWSPINLOCK ARM: pxa: select both FB and FB_W100 for eseries ARM: ixp4xx: fix ioport_unmap definition ARM: ep93xx: use ARM_PATCH_PHYS_VIRT correctly ARM: mmp: mark usb_dma_mask as __maybe_unused ARM: omap2: mark unused functions as __maybe_unused ARM: omap1: avoid unused variable warning ARM: sirf: mark sirfsoc_init_late as __maybe_unused ARM: ixp4xx: use normal prototype for {read,write}s{b,w,l} ARM: omap1/ams-delta: warn about failed regulator enable ARM: rpc: rename RAM_SIZE macro ARM: w90x900: normalize clk API ARM: ep93xx: normalize clk API ARM: dts: sun8i: a83t: Switch to CCU device tree binding macros arm64: allwinner: sun50i-a64: Correct emac register size ARM: dts: sunxi: h3/h5: Correct emac register size ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Will Deacon: "Here are some more arm64 fixes for 4.13. The main one is the PTE race with the hardware walker, but there are a couple of other things too. - Report correct timer frequency to userspace when trapping CNTFRQ_EL0 - Fix race with hardware page table updates when updating access flags - Silence clang overflow warning in VA_START and PAGE_OFFSET calculations" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: avoid overflow in VA_START and PAGE_OFFSET arm64: Fix potential race with hardware DBM in ptep_set_access_flags() arm64: Use arch_timer_get_rate when trapping CNTFRQ_EL0
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
Pull sparc fixes from David Miller: - block interrupts properly across the entire MMU context change (both the hw MMU context change and the TSB table change) so that we don't get a perf event interrupt in the middle. From Rob Gardner. - be sure to register hugepages early enough, from Nitin Gupta. - UltraSPARC-III user copy exception handling would return garbage for the copied length in some circumstances. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Fix exception handling in UltraSPARC-III memcpy. sbus: Convert to using %pOF instead of full_name sparc: defconfig: Cleanup from old Kconfig options sparc64: Register hugepages during arch init sparc64: Prevent perf from running during super critical sections
-
git://github.com/ceph/ceph-clientLinus Torvalds authored
Pull ceph fixes from Ilya Dryomov: "A bunch of fixes and follow-ups for -rc1 Luminous patches: issues with ->reencode_message() and last minute RADOS semantic changes in v12.1.2" * tag 'ceph-for-4.13-rc4' of git://github.com/ceph/ceph-client: libceph: make RECOVERY_DELETES feature create a new interval libceph: upmap semantic changes crush: assume weight_set != null imples weight_set_size > 0 libceph: fallback for when there isn't a pool-specific choose_arg libceph: don't call ->reencode_message() more than once per message libceph: make encode_request_*() work with r_mempool requests
-