- 06 May, 2020 18 commits
-
-
Alaa Hleihel authored
commit c08cfb2d upstream. Initialize ib_spec on the stack before using it, otherwise we will have garbage values that will break creating default rules with invalid parsing error. Fixes: a37a1a42 ("IB/mlx4: Add mechanism to support flow steering over IB links") Link: https://lore.kernel.org/r/20200413132235.930642-1-leon@kernel.orgSigned-off-by:
Alaa Hleihel <alaa@mellanox.com> Reviewed-by:
Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Aharon Landau authored
commit 2d7e3ff7 upstream. GRH fields such as sgid_index, hop limit, et. are set in the QP context when QP is created/modified. Currently, when query QP is performed, we fill the GRH fields only if the GRH bit is set in the QP context, but this bit is not set for RoCE. Adjust the check so we will set all relevant data for the RoCE too. Since this data is returned to userspace, the below is an ABI regression. Fixes: d8966fcd ("IB/core: Use rdma_ah_attr accessor functions") Link: https://lore.kernel.org/r/20200413132028.930109-1-leon@kernel.orgSigned-off-by:
Aharon Landau <aharonl@mellanox.com> Reviewed-by:
-
Martin Wilck authored
commit 5a263892 upstream. qlt_free_session_done() tries to post async PRLO / LOGO, and waits for the completion of these async commands. If UNLOADING is set, this is doomed to timeout, because the async logout command will never complete. The only way to avoid waiting pointlessly is to fail posting these commands in the first place if the driver is in UNLOADING state. In general, posting any command should be avoided when the driver is UNLOADING. With this patch, "rmmod qla2xxx" completes without noticeable delay. Link: https://lore.kernel.org/r/20200421204621.19228-3-mwilck@suse.com Fixes: 45235022 ("scsi: qla2xxx: Fix driver unload by shutting down chip") Acked-by:
Arun Easi <aeasi@marvell.com> Reviewed-by:
Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by:
Martin Wilck <mwilck@suse.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Martin Wilck authored
commit 856e152a upstream. The purpose of the UNLOADING flag is to avoid port login procedures to continue when a controller is in the process of shutting down. It makes sense to set this flag before starting session teardown. Furthermore, use atomic test_and_set_bit() to avoid the shutdown being run multiple times in parallel. In qla2x00_disable_board_on_pci_error(), the test for UNLOADING is postponed until after the check for an already disabled PCI board. Link: https://lore.kernel.org/r/20200421204621.19228-2-mwilck@suse.com Fixes: 45235022 ("scsi: qla2xxx: Fix driver unload by shutting down chip") Reviewed-by:
Daniel Wagner <dwagner@suse.de> Reviewed-by:
Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by:
-
Gabriel Krisman Bertazi authored
commit 5686dee3 upstream. When adding devices that don't have a scsi_dh on a BIO based multipath, I was able to consistently hit the warning below and lock-up the system. The problem is that __map_bio reads the flag before it potentially being modified by choose_pgpath, and ends up using the older value. The WARN_ON below is not trivially linked to the issue. It goes like this: The activate_path delayed_work is not initialized for non-scsi_dh devices, but we always set MPATHF_QUEUE_IO, asking for initialization. That is fine, since MPATHF_QUEUE_IO would be cleared in choose_pgpath. Nevertheless, only for BIO-based mpath, we cache the flag before calling choose_pgpath, and use the older version when deciding if we should initialize the path. Therefore, we end up trying to initialize the paths, and calling the non-initialized activate_path work. [ 82.437100] ------------[ cut here ]------------ [ 82.437659] WARNING: CPU: 3 PID: 602 at kernel/workqueue.c:1624 __queue_delayed_work+0x71/0x90 [ 82.438436] Modules linked in: [ 82.438911] CPU: 3 PID: 602 Comm: systemd-udevd Not tainted 5.6.0-rc6+ #339 [ 82.439680] RIP: 0010:__queue_delayed_work+0x71/0x90 [ 82.440287] Code: c1 48 89 4a 50 81 ff 00 02 00 00 75 2a 4c 89 cf e9 94 d6 07 00 e9 7f e9 ff ff 0f 0b eb c7 0f 0b 48 81 7a 58 40 74 a8 94 74 a7 <0f> 0b 48 83 7a 48 00 74 a5 0f 0b eb a1 89 fe 4c 89 cf e9 c8 c4 07 [ 82.441719] RSP: 0018:ffffb738803977c0 EFLAGS: 00010007 [ 82.442121] RAX: ffffa086389f9740 RBX: 0000000000000002 RCX: 0000000000000000 [ 82.442718] RDX: ffffa086350dd930 RSI: ffffa0863d76f600 RDI: 0000000000000200 [ 82.443484] RBP: 0000000000000200 R08: 0000000000000000 R09: ffffa086350dd970 [ 82.444128] R10: 0000000000000000 R11: 0000000000000000 R12: ffffa086350dd930 [ 82.444773] R13: ffffa0863d76f600 R14: 0000000000000000 R15: ffffa08636738008 [ 82.445427] FS: 00007f6abfe9dd40(0000) GS:ffffa0863dd80000(0000) knlGS:00000 [ 82.446040] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 82.446478] CR2: 0000557d288db4e8 CR3: 0000000078b36000 CR4: 00000000000006e0 [ 82.447104] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 82.447561] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 82.448012] Call Trace: [ 82.448164] queue_delayed_work_on+0x6d/0x80 [ 82.448472] __pg_init_all_paths+0x7b/0xf0 [ 82.448714] pg_init_all_paths+0x26/0x40 [ 82.448980] __multipath_map_bio.isra.0+0x84/0x210 [ 82.449267] __map_bio+0x3c/0x1f0 [ 82.449468] __split_and_process_non_flush+0x14a/0x1b0 [ 82.449775] __split_and_process_bio+0xde/0x340 [ 82.450045] ? dm_get_live_table+0x5/0xb0 [ 82.450278] dm_process_bio+0x98/0x290 [ 82.450518] dm_make_request+0x54/0x120 [ 82.450778] generic_make_request+0xd2/0x3e0 [ 82.451038] ? submit_bio+0x3c/0x150 [ 82.451278] submit_bio+0x3c/0x150 [ 82.451492] mpage_readpages+0x129/0x160 [ 82.451756] ? bdev_evict_inode+0x1d0/0x1d0 [ 82.452033] read_pages+0x72/0x170 [ 82.452260] __do_page_cache_readahead+0x1ba/0x1d0 [ 82.452624] force_page_cache_readahead+0x96/0x110 [ 82.452903] generic_file_read_iter+0x84f/0xae0 [ 82.453192] ? __seccomp_filter+0x7c/0x670 [ 82.453547] new_sync_read+0x10e/0x190 [ 82.453883] vfs_read+0x9d/0x150 [ 82.454172] ksys_read+0x65/0xe0 [ 82.454466] do_syscall_64+0x4e/0x210 [ 82.454828] entry_SYSCALL_64_after_hwframe+0x49/0xbe [...] [ 82.462501] ---[ end trace bb39975e9cf45daa ]--- Cc: stable@vger.kernel.org Signed-off-by:
Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Mikulas Patocka authored
commit 31b22120 upstream. The dm-writecache reads metadata in the target constructor. However, when we reload the target, there could be another active instance running on the same device. This is the sequence of operations when doing a reload: 1. construct new target 2. suspend old target 3. resume new target 4. destroy old target Metadata that were written by the old target between steps 1 and 2 would not be visible by the new target. Fix the data corruption by loading the metadata in the resume handler. Also, validate block_size is at least as large as both the devices' logical block size and only read 1 block from the metadata during target constructor -- no need to read entirety of metadata now that it is done during resume. Fixes: 48debafe ("dm: add writecache target") Cc: stable@vger.kernel.org # v4.18+ Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
Sunwook Eom authored
commit ad4e80a6 upstream. The error correction data is computed as if data and hash blocks were concatenated. But hash block number starts from v->hash_start. So, we have to calculate hash block number based on that. Fixes: a739ff3f ("dm verity: add support for forward error correction") Cc: stable@vger.kernel.org Signed-off-by:
Sunwook Eom <speed.eom@samsung.com> Reviewed-by:
Sami Tolvanen <samitolvanen@google.com> Signed-off-by:
-
Dexuan Cui authored
commit 2351f8d2 upstream. Currently the kernel threads are not frozen in software_resume(), so between dpm_suspend_start(PMSG_QUIESCE) and resume_target_kernel(), system_freezable_power_efficient_wq can still try to submit SCSI commands and this can cause a panic since the low level SCSI driver (e.g. hv_storvsc) has quiesced the SCSI adapter and can not accept any SCSI commands: https://lkml.org/lkml/2020/4/10/47 At first I posted a fix (https://lkml.org/lkml/2020/4/21/1318) trying to resolve the issue from hv_storvsc, but with the help of Bart Van Assche, I realized it's better to fix software_resume(), since this looks like a generic issue, not only pertaining to SCSI. Cc: All applicable <stable@vger.kernel.org> Signed-off-by:
Dexuan Cui <decui@microsoft.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Kai-Heng Feng authored
commit a9b760b0 upstream. Transitioned power state logged at the end of setting ACPI power. However, D3cold won't be in the message because state can only be D3hot at most. Use target_state to corretly report when power state is D3cold. Cc: All applicable <stable@vger.kernel.org> Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
Takashi Iwai authored
commit 4285de07 upstream. The checks of the plugin buffer overflow in the previous fix by commit f2ecf903 ("ALSA: pcm: oss: Avoid plugin buffer overflow") are put in the wrong places mistakenly, which leads to the expected (repeated) sound when the rate plugin is involved. Fix in the right places. Also, at those right places, the zero check is needed for the termination node, so added there as well, and let's get it done, finally. Fixes: f2ecf903 ("ALSA: pcm: oss: Avoid plugin buffer overflow") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200424193350.19678-1-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Wu Bo authored
commit a2f64724 upstream. Fix the following coccicheck warning: sound/pci/hda/patch_hdmi.c:1852:2-8: preceding lock on line 1846 After add sanity check to pass klockwork check, The spdif_mutex should be unlock before return true in check_non_pcm_per_cvt(). Fixes: 960a581e ("ALSA: hda: fix some klockwork scan warnings") Signed-off-by:
Wu Bo <wubo40@huawei.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1587907042-694161-1-git-send-email-wubo40@huawei.comSigned-off-by:
-
Takashi Iwai authored
commit 547d2c9c upstream. The USB vendor ID of NuPrime DAC-10 is not 16b0 but 16d0. Fixes: f656891c ("ALSA: usb-audio: add more quirks for DSD interfaces") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200430124755.15940-1-tiwai@suse.deSigned-off-by:
-
Hui Wang authored
commit ef0b3203 upstream. This new Lenovo ThinkCenter has two front mics which can't be handled by PA so far, so apply the fixup ALC283_FIXUP_HEADSET_MIC to change the location for one of the mics. Cc: <stable@vger.kernel.org> Signed-off-by:
Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20200427030039.10121-1-hui.wang@canonical.comSigned-off-by:
-
Xiyu Yang authored
commit f6033c5e upstream. btrfs_remove_block_group() invokes btrfs_lookup_block_group(), which returns a local reference of the block group that contains the given bytenr to "block_group" with increased refcount. When btrfs_remove_block_group() returns, "block_group" becomes invalid, so the refcount should be decreased to keep refcount balanced. The reference counting issue happens in several exception handling paths of btrfs_remove_block_group(). When those error scenarios occur such as btrfs_alloc_path() returns NULL, the function forgets to decrease its refcnt increased by btrfs_lookup_block_group() and will cause a refcnt leak. Fix this issue by jumping to "out_put_group" label and calling btrfs_put_block_group() when those error scenarios occur. CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by:
Xin Tan <tanxin.ctf@gmail.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Vasily Averin authored
commit 933db733 upstream. qxl_release should not be accesses after qxl_push_*_ring_release() calls: userspace driver can process submitted command quickly, move qxl_release into release_ring, generate interrupt and trigger garbage collector. It can lead to crashes in qxl driver or trigger memory corruption in some kmalloc-192 slab object Gerd Hoffmann proposes to swap the qxl_release_fence_buffer_objects() + qxl_push_{cursor,command}_ring_release() calls to close that race window. cc: stable@vger.kernel.org Fixes: f64122c1 ("drm: add new QXL driver. (v1.4)") Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Link: http://patchwork.freedesktop.org/patch/msgid/fa17b338-66ae-f299-68fe-8d32419d9071@virtuozzo.comSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com> [backported to v.4.19 stable] Signed-off-by:
-
Vasily Averin authored
commit a65aa9c3 upstream. Cc: stable@vger.kernel.org Fixes: 8002db63 ("qxl: convert qxl driver to proper use for reservations") Signed-off-by:
-
Vasily Averin authored
commit 85e9b88a upstream. ret should be changed to release allocated struct qxl_release Cc: stable@vger.kernel.org Fixes: 8002db63 ("qxl: convert qxl driver to proper use for reservations") Signed-off-by:
-
Ville Syrjälä authored
commit 6292b8ef upstream. The DispID DTD pixel clock is documented as: "00 00 00 h → FF FF FF h | Pixel clock ÷ 10,000 0.01 → 167,772.16 Mega Pixels per Sec" Which seems to imply that we to add one to the raw value. Reality seems to agree as there are tiled displays in the wild which currently show a 10kHz difference in the pixel clock between the tiles (one tile gets its mode from the base EDID, the other from the DispID block). Cc: stable@vger.kernel.org References: https://gitlab.freedesktop.org/drm/intel/-/issues/27Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200423151743.18767-1-ville.syrjala@linux.intel.comReviewed-by:
Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
-
- 02 May, 2020 22 commits
-
-
Greg Kroah-Hartman authored
-
Al Viro authored
commit b0d3869c upstream. ... to protect the modification of mp->m_count done by it. Most of the places that modify that thing also have namespace_lock held, but not all of them can do so, so we really need mount_lock here. Kudos to Piotr Krysiuk <piotras@gmail.com>, who'd spotted a related bug in pivot_root(2) (fixed unnoticed in 5.3); search for other similar turds has caught out this one. Cc: stable@kernel.org Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Piotr Krysiuk <piotras@gmail.com> Signed-off-by:
-
Ritesh Harjani authored
commit f1eec3b0 upstream. While calculating overhead for internal journal, also check that j_inum shouldn't be 0. Otherwise we get below error with xfstests generic/050 with external journal (XXX_LOGDEV config) enabled. It could be simply reproduced with loop device with an external journal and marking blockdev as RO before mounting. [ 3337.146838] EXT4-fs error (device pmem1p2): ext4_get_journal_inode:4634: comm mount: inode #0: comm mount: iget: illegal inode # ------------[ cut here ]------------ generic_make_request: Trying to write to read-only block-device pmem1p2 (partno 2) WARNING: CPU: 107 PID: 115347 at block/blk-core.c:788 generic_make_request_checks+0x6b4/0x7d0 CPU: 107 PID: 115347 Comm: mount Tainted: G L --------- -t - 4.18.0-167.el8.ppc64le #1 NIP: c0000000006f6d44 LR: c0000000006f6d40 CTR: 0000000030041dd4 <...> NIP [c0000000006f6d44] generic_make_request_checks+0x6b4/0x7d0 LR [c0000000006f6d40] generic_make_request_checks+0x6b0/0x7d0 <...> Call Trace: generic_make_request_checks+0x6b0/0x7d0 (unreliable) generic_make_request+0x3c/0x420 submit_bio+0xd8/0x200 submit_bh_wbc+0x1e8/0x250 __sync_dirty_buffer+0xd0/0x210 ext4_commit_super+0x310/0x420 [ext4] __ext4_error+0xa4/0x1e0 [ext4] __ext4_iget+0x388/0xe10 [ext4] ext4_get_journal_inode+0x40/0x150 [ext4] ext4_calculate_overhead+0x5a8/0x610 [ext4] ext4_fill_super+0x3188/0x3260 [ext4] mount_bdev+0x778/0x8f0 ext4_mount+0x28/0x50 [ext4] mount_fs+0x74/0x230 vfs_kern_mount.part.6+0x6c/0x250 do_mount+0x2fc/0x1280 sys_mount+0x158/0x180 system_call+0x5c/0x70 EXT4-fs (pmem1p2): no journal found EXT4-fs (pmem1p2): can't get journal size EXT4-fs (pmem1p2): mounted filesystem without journal. Opts: dax,norecovery Fixes: 3c816ded ("ext4: use journal inode to determine journal overhead") Reported-by:
Harish Sriram <harish@linux.ibm.com> Signed-off-by:
Ritesh Harjani <riteshh@linux.ibm.com> Reviewed-by:
Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20200316093038.25485-1-riteshh@linux.ibm.comSigned-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Yuval Basson authored
commit 8063f761 upstream. The qed_chain data structure was modified in commit 1a4a6975 ("qed: Chain support for external PBL") to support receiving an external pbl (due to iWARP FW requirements). The pages pointed to by the pbl are allocated in qed_chain_alloc and their virtual address are stored in an virtual addresses array to enable accessing and freeing the data. The physical addresses however weren't stored and were accessed directly from the external-pbl during free. Destroy-qp flow, leads to freeing the external pbl before the chain is freed, when the chain is freed it tries accessing the already freed external pbl, leading to a use-after-free. Therefore we need to store the physical addresses in additional to the virtual addresses in a new data structure. Fixes: 1a4a6975 ("qed: Chain support for external PBL") Signed-off-by:
Michal Kalderon <mkalderon@marvell.com> Signed-off-by:
Yuval Bason <ybason@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Luke Nelson authored
commit 50fe7ebb upstream. The current JIT clobbers the destination register for BPF_JSET BPF_X and BPF_K by using "and" and "or" instructions. This is fine when the destination register is a temporary loaded from a register stored on the stack but not otherwise. This patch fixes the problem (for both BPF_K and BPF_X) by always loading the destination register into temporaries since BPF_JSET should not modify the destination register. This bug may not be currently triggerable as BPF_REG_AX is the only register not stored on the stack and the verifier uses it in a limited way. Fixes: 03f5781b ("bpf, x86_32: add eBPF JIT compiler for ia32") Signed-off-by:
Xi Wang <xi.wang@gmail.com> Signed-off-by:
Luke Nelson <luke.r.nels@gmail.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Wang YanQing <udknight@gmail.com> Link: https://lore.kernel.org/bpf/20200422173630.8351-2-luke.r.nels@gmail.comSigned-off-by:
-
Sascha Hauer authored
[ Upstream commit c843b382 ] The jc42 driver passes I2C client's name as hwmon device name. In case of device tree probed devices this ends up being part of the compatible string, "jc-42.4-temp". This name contains hyphens and the hwmon core doesn't like this: jc42 2-0018: hwmon: 'jc-42.4-temp' is not a valid name attribute, please fix This changes the name to "jc42" which doesn't have any illegal characters. Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20200417092853.31206-1-s.hauer@pengutronix.deSigned-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Theodore Ts'o authored
[ Upstream commit 907ea529 ] If the in-core buddy bitmap gets corrupted (or out of sync with the block bitmap), issue a WARN_ON and try to recover. In most cases this involves skipping trying to allocate out of a particular block group. We can end up declaring the file system corrupted, which is fair, since the file system probably should be checked before we proceed any further. Link: https://lore.kernel.org/r/20200414035649.293164-1-tytso@mit.edu Google-Bug-Id: 34811296 Google-Bug-Id: 34639169 Signed-off-by:
-
Theodore Ts'o authored
[ Upstream commit a17a9d93 ] Current wait times have proven to be too short to protect against inode reuses that lead to metadata inconsistencies. Now that we will retry the inode allocation if we can't find any recently deleted inodes, it's a lot safer to increase the recently deleted time from 5 seconds to a minute. Link: https://lore.kernel.org/r/20200414023925.273867-1-tytso@mit.edu Google-Bug-Id: 36602237 Signed-off-by:
-
yangerkun authored
[ Upstream commit c2a559bc ] Run generic/388 with journal data mode sometimes may trigger the warning in ext4_invalidatepage. Actually, we should use the matching invalidatepage in ext4_writepage. Signed-off-by:
yangerkun <yangerkun@huawei.com> Signed-off-by:
-
Fangrui Song authored
[ Upstream commit c9a4ef66 ] In assembly, many instances of __emit_inst(x) expand to a directive. In a few places __emit_inst(x) is used as an assembler macro argument. For example, in arch/arm64/kvm/hyp/entry.S ALTERNATIVE(nop, SET_PSTATE_PAN(1), ARM64_HAS_PAN, CONFIG_ARM64_PAN) expands to the following by the C preprocessor: alternative_insn nop, .inst (0xd500401f | ((0) << 16 | (4) << 5) | ((!!1) << 8)), 4, 1 Both comma and space are separators, with an exception that content inside a pair of parentheses/quotes is not split, so the clang integrated assembler splits the arguments to: nop, .inst, (0xd500401f | ((0) << 16 | (4) << 5) | ((!!1) << 8)), 4, 1 GNU as preprocesses the input with do_scrub_chars(). Its arm64 backend (along with many other non-x86 backends) sees: alternative_insn nop,.inst(0xd500401f|((0)<<16|(4)<<5)|((!!1)<<8)),4,1 # .inst(...) is parsed as one argument while its x86 backend sees: alternative_insn nop,.inst (0xd500401f|((0)<<16|(4)<<5)|((!!1)<<8)),4,1 # The extra space before '(' makes the whole .inst (...) parsed as two arguments The non-x86 backend's behavior is considered unintentional (https://sourceware.org/bugzilla/show_bug.cgi?id=25750). So drop the space separator inside `.inst (...)` to make the clang integrated assembler work. Suggested-by:
Ilie Halip <ilie.halip@gmail.com> Signed-off-by:
Fangrui Song <maskray@google.com> Reviewed-by:
Mark Rutland <mark.rutland@arm.com> Link: https://github.com/ClangBuiltLinux/linux/issues/939Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Hui Wang authored
[ Upstream commit 9a641848 ] Before the pci_driver->probe() is called, the pci subsystem calls runtime_forbid() and runtime_get_sync() on this pci dev, so only call runtime_put_autosuspend() is not enough to enable the runtime_pm on this device. For controllers with vgaswitcheroo feature, the pci/quirks.c will call runtime_allow() for this dev, then the controllers could enter rt_idle/suspend/resume, but for non-vgaswitcheroo controllers like Intel hda controllers, the runtime_pm is not enabled because the runtime_allow() is not called. Since it is no harm calling runtime_allow() twice, here let hda driver call runtime_allow() for all controllers. Then the runtime_pm is enabled on all controllers after the put_autosuspend() is called. Signed-off-by:
-
Juergen Gross authored
[ Upstream commit 6b51fd3f ] xenbus_map_ring_valloc() maps a ring page and returns the status of the used grant (0 meaning success). There are Xen hypervisors which might return the value 1 for the status of a failed grant mapping due to a bug. Some callers of xenbus_map_ring_valloc() test for errors by testing the returned status to be less than zero, resulting in no error detected and crashing later due to a not available ring page. Set the return value of xenbus_map_ring_valloc() to GNTST_general_error in case the grant status reported by Xen is greater than zero. This is part of XSA-316. Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Wei Liu <wl@xen.org> Link: https://lore.kernel.org/r/20200326080358.1018-1-jgross@suse.comSigned-off-by:
-
Josh Poimboeuf authored
[ Upstream commit 8782e7ca ] Historically, the relocation symbols for ORC entries have only been section symbols: .text+0: sp:sp+8 bp:(und) type:call end:0 However, the Clang assembler is aggressive about stripping section symbols. In that case we will need to use function symbols: freezing_slow_path+0: sp:sp+8 bp:(und) type:call end:0 In preparation for the generation of such entries in "objtool orc generate", add support for reading them in "objtool orc dump". Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
Miroslav Benes <mbenes@suse.cz> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/b811b5eb1a42602c3b523576dc5efab9ad1c174d.1585761021.git.jpoimboe@redhat.comSigned-off-by:
-
Josh Poimboeuf authored
[ Upstream commit bd841d61 ] CONFIG_UBSAN_TRAP causes GCC to emit a UD2 whenever it encounters an unreachable code path. This includes __builtin_unreachable(). Because the BUG() macro uses __builtin_unreachable() after it emits its own UD2, this results in a double UD2. In this case objtool rightfully detects that the second UD2 is unreachable: init/main.o: warning: objtool: repair_env_string()+0x1c8: unreachable instruction We weren't able to figure out a way to get rid of the double UD2s, so just silence the warning. Reported-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
-
Bodo Stroesser authored
[ Upstream commit 066f79a5 ] In case command ring buffer becomes inconsistent, tcmu sets device flag TCMU_DEV_BIT_BROKEN. If the bit is set, tcmu rejects new commands from LIO core with TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE, and no longer processes completions from the ring. The reset_ring attribute can be used to completely clean up the command ring, so after reset_ring the ring no longer is inconsistent. Therefore reset_ring also should reset bit TCMU_DEV_BIT_BROKEN to allow normal processing. Link: https://lore.kernel.org/r/20200409101026.17872-1-bstroesser@ts.fujitsu.comAcked-by:
Mike Christie <mchristi@redhat.com> Signed-off-by:
Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by:
-
Bodo Stroesser authored
[ Upstream commit 8fed04eb ] Creation of the response to READ FULL STATUS fails for FC based reservations. Reason is the too high loop limit (< 24) in fc_get_pr_transport_id(). The string representation of FC WWPN is 23 chars long only ("11:22:33:44:55:66:77:88"). So when i is 23, the loop body is executed a last time for the ending '\0' of the string and thus hex2bin() reports an error. Link: https://lore.kernel.org/r/20200408132610.14623-3-bstroesser@ts.fujitsu.comSigned-off-by:
-
Roy Spliet authored
[ Upstream commit 3ba21113 ] This fixes runtime PM not working after a suspend-to-RAM cycle at least for the codec-less HDA device found on NVIDIA GPUs. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043Signed-off-by:
Roy Spliet <nouveau@spliet.org> Link: https://lore.kernel.org/r/20200413082034.25166-7-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
[ Upstream commit 9479e75f ] Currently, when the HD-audio controller driver doesn't detect any codecs, it tries to abort the probe. But this abort happens at the delayed probe, i.e. the primary probe call already returned success, hence the driver is never unbound until user does so explicitly. As a result, it may leave the HD-audio device in the running state without the runtime PM. More badly, if the device is a HD-audio bus that is tied with a GPU, GPU cannot reach to the full power down and consumes unnecessarily much power. This patch changes the logic after no-codec situation; it continues probing without the further codec initialization but keep the controller driver running normally. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043Tested-by:
-
Darrick J. Wong authored
[ Upstream commit c142932c ] In the reflink extent remap function, it turns out that uirec (the block mapping corresponding only to the part of the passed-in mapping that got unmapped) was not fully initialized. Specifically, br_state was not being copied from the passed-in struct to the uirec. This could lead to unpredictable results such as the reflinked mapping being marked unwritten in the destination file. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Signed-off-by:
-
Olaf Hering authored
[ Upstream commit 97d9f1c4 ] A few kernel features depend on ms_hyperv.misc_features, but unlike its siblings ->features and ->hints, the value was never reported during boot. Signed-off-by:
Olaf Hering <olaf@aepfle.de> Link: https://lore.kernel.org/r/20200407172739.31371-1-olaf@aepfle.deSigned-off-by:
Wei Liu <wei.liu@kernel.org> Signed-off-by:
-
Martin Fuzzey authored
[ Upstream commit da722186 ] On some SoCs, such as the i.MX6, it is necessary to set a bit in the SoC level GPR register before suspending for wake on lan to work. The fec platform callback sleep_mode_enable was intended to allow this but the platform implementation was NAK'd back in 2015 [1] This means that, currently, wake on lan is broken on mainline for the i.MX6 at least. So implement the required bit setting in the fec driver by itself by adding a new optional DT property indicating the GPR register and adding the offset and bit information to the driver. [1] https://www.spinics.net/lists/netdev/msg310922.htmlSigned-off-by:
Martin Fuzzey <martin.fuzzey@flowbird.group> Signed-off-by:
Fugang Duan <fugang.duan@nxp.com> Signed-off-by:
-
Luke Nelson authored
[ Upstream commit aee194b1 ] This patch fixes an encoding bug in emit_stx for BPF_B when the source register is BPF_REG_FP. The current implementation for BPF_STX BPF_B in emit_stx saves one REX byte when the operands can be encoded using Mod-R/M alone. The lower 8 bits of registers %rax, %rbx, %rcx, and %rdx can be accessed without using a REX prefix via %al, %bl, %cl, and %dl, respectively. Other registers, (e.g., %rsi, %rdi, %rbp, %rsp) require a REX prefix to use their 8-bit equivalents (%sil, %dil, %bpl, %spl). The current code checks if the source for BPF_STX BPF_B is BPF_REG_1 or BPF_REG_2 (which map to %rdi and %rsi), in which case it emits the required REX prefix. However, it misses the case when the source is BPF_REG_FP (mapped to %rbp). The result is that BPF_STX BPF_B with BPF_REG_FP as the source operand will read from register %ch instead of the correct %bpl. This patch fixes the problem by fixing and refactoring the check on which registers need the extra REX byte. Since no BPF registers map to %rsp, there is no need to handle %spl. Fixes: 62258278 ("net: filter: x86: internal BPF JIT") Signed-off-by:
-
