Reorder the spinlock wait code to make it more readable.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

The out of line _raw_read_lock_wait_flags/_raw_write_lock_wait_flags
functions for the arch_read_lock_flags/arch_write_lock_flags  calls
fail to re-enable the interrupts after another unsuccessful try to
get the lock with compare-and-swap. The following wait would be
done with interrupts disabled which is suboptimal.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

In case a lock is contended it is better to do a load-and-test first
before trying to get the lock with compare-and-swap. This helps to avoid
unnecessary cache invalidations of the cacheline for the lock if the
CPU has to wait for the lock. For an uncontended lock doing the
compare-and-swap directly is a bit better, if the CPU does not have the
cacheline in its cache yet the compare-and-swap will get it read-write
immediately while a load-and-test would get it read-only first.

Always to the load-and-test first to avoid the cacheline invalidations
for the contended case outweight the potential read-only to read-write
cacheline upgrade for the uncontended case.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Fix multiple definitions of struct channel_path_desc by moving it
to asm/chpid.h . Also change ccw_device_get_chp_desc to use proper
types.
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

On LPAR, when spin_retry is set to <= 0, arch_spin_lock_wait() and
arch_spin_lock_wait_flags() may end up in a while(1) loop w/o doing
any compare and swap operation. To fix this, use do/while instead of
for loop.
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

This fixes:
arch/s390/appldata/appldata_mem.c:135:2: error: implicit declaration of function 'kzalloc' [-Werror=implicit-function-declaration]
arch/s390/appldata/appldata_mem.c:141:3: error: implicit declaration of function 'kfree' [-Werror=implicit-function-declaration]
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

This shortens the code by ~17k (performace_defconfig, march=z196).
The number of exception table entries however increases from 164
entries to 2500 entries (+~18k).
However the executed code is shorter and also faster since we save
the branches to the out-of-line copy_to/from_user implementations.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Add a bunch of s390 specific pci attributes to help
identifying pci functions.
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Let the driver core handle attribute creation by putting all s390
specific pci attributes in an attribute group which is referenced
by pdev->dev.groups in pcibios_add_device.

Link: https://lkml.kernel.org/r/alpine.LFD.2.11.1404141101500.1529@denkbrettReviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Introduce the zpci_attr macro to create read only sysfs attributes
to avoid duplicate code.
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Processing pci hotplug events can fail when a pci function is in an
unexpected state. This can happen when we already processed the
change associated with the hotplug event (especially when receiving
hotplug events during early boot).
Just ignore the event in this case.
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

The oi and ni instructions used in entry[64].S to set and clear bits
in the thread-flags are not guaranteed to be atomic in regard to other
CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific
bits. Updates on the TIF bits are done with atomic instructions,
updates on CPU and pt_regs bits are done with non-atomic instructions.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Always switch to the kernel ASCE in switch_mm. Load the secondary
space ASCE in finish_arch_post_lock_switch after checking that
any pending page table operations have completed. The primary
ASCE is loaded in entry[64].S. With this the update_primary_asce
call can be removed from the switch_to macro and from the start
of switch_mm function. Remove the load_primary argument from
update_user_asce/clear_user_asce, rename update_user_asce to
set_user_asce and rename update_primary_asce to load_kernel_asce.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Currently the smp_stop_cpu() function for SMP kernels enters a busy
loop when "begin" is entered on the z/VM console after Linux is halted.
To avoid this behavior, use the non-SMP variant of smp_stop_cpu()
which stops the CPU again after "begin" is entered. As a side
effect we now have consistent behavior for SMP and non-SMP Linux.
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Fix new s390 kernel-doc warning:

Warning(arch/s390/include/asm/ccwgroup.h:27): No description found for parameter 'ungroup_work'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc:	Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc:	Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Cc:	linux-s390@vger.kernel.org
Cc:	Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc:	Heiko Carstens <heiko.carstens@de.ibm.com>
Cc:	linux390@de.ibm.com
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Do the following changes:

 - Document new /proc/vmcore interface
 - Document partition dump external initramfs with s390-tools-1.24.0
 - Remove initramfs config file because initramfs is now built automatically
   in s390-tools
 - Replace description of kernel config options with "make zfcpdump_defconfig"
 - Some editorial changes
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Currently there are two s390 kernel dump config options "CONFIG_ZFCPDUMP"
and "CONFIG_CRASH_DUMP". In order to keep things simple and because the
"CONFIG_ZFCPDUMP" option already has a dependency to "CONFIG_CRASH_DUMP"
remove the CONFIG_ZFCPDUMP option.
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

This is not necessary anymore, since the offending code is gone with
the conversion to the memblock code.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>-
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Use lowcore constant to improve the code generated for spinlocks.

[ Martin Schwidefsky: patch breakdown and code beautification ]
Signed-off-by: Philipp Hachtmann <phacht@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Improve the spinlock code in several aspects:
 - Have _raw_compare_and_swap return true if the operation has been
   successful instead of returning the old value.
 - Remove the "volatile" from arch_spinlock_t and arch_rwlock_t
 - Rename 'owner_cpu' to 'lock'
 - Add helper functions arch_spin_trylock_once / arch_spin_tryrelease_once

[ Martin Schwidefsky: patch breakdown and code beautification ]
Signed-off-by: Philipp Hachtmann <phacht@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

The original bootmem allocator is getting replaced by memblock. To
cover the needs of the s390 kdump implementation the physical memory
list is used.
With this patch the bootmem allocator and its bitmaps are completely
removed from s390.
Signed-off-by: Philipp Hachtmann <phacht@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Add the physmem list to the memblock structure. This list only exists
if HAVE_MEMBLOCK_PHYS_MAP is selected and contains the unmodified
list of physically available memory. It differs from the memblock
memory list as it always contains all memory ranges even if the
memory has been restricted, e.g. by use of the mem= kernel parameter.
Signed-off-by: Philipp Hachtmann <phacht@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Refactor the memblock code and extend the memblock API to make it
more flexible. With the extended API it is simple to define and
work with additional memory lists.

The static functions memblock_add_region and __memblock_remove are
renamed to memblock_add_range and meblock_remove_range and added to
the memblock API.

The __next_free_mem_range and __next_free_mem_range_rev functions
are replaced with calls to the more generic list walkers
__next_mem_range and __next_mem_range_rev.

To walk an arbitrary memory list two new macros for_each_mem_range
and for_each_mem_range_rev are added. These new macros are used
to define for_each_free_mem_range and for_each_free_mem_range_reverse.
Signed-off-by: Philipp Hachtmann <phacht@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Pull parisc fixes from Helge Deller:
 "There are two patches in here:

  The first patch greatly improves latency and corrects the memory
  ordering in our light-weight atomic locking syscall.

  The second patch ratelimits printing of userspace segfaults in the
  same way as it's done on other platforms.  This fixes a possible DOS
  on parisc since it prevents the syslog to grow too fast.  For example,
  when the debian acl2 package was built on our debian buildd servers,
  this package produced lots of gigabytes in syslog in very short time
  and thus filled our harddisks, which then turned the server nearly
  completely unaccessible and unresponsive"

* 'parisc-3.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Improve LWS-CAS performance
  parisc: ratelimit userspace segfault printing

Pull two arm64 fixes from Catalin Marinas:
 - arm64 migrate_irqs() fix following commit ffde1de6 (irqchip: Gic:
   Support forced affinity setting)
 - fix arm64 pud_huge() to return 0 when only 2 levels page tables are
   used (__PAGETABLE_PMD_FOLDED defined and pmd_huge already covers
   block entries at the first level), otherwise KVM gets confused

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: fix pud_huge() for 2-level pagetables
  arm64: use cpu_online_mask when using forced irq_set_affinity

Pull Metag architecture and related fixes from James Hogan:
 "Mostly fixes for metag and parisc relating to upgrowing stacks.

   - Fix missing compiler barriers in metag memory barriers.
   - Fix BUG_ON on metag when RLIMIT_STACK hard limit is increased
     beyond safe value.
   - Make maximum stack size configurable.  This reduces the default
     user stack size back to 80MB (especially on parisc after their
     removal of _STK_LIM_MAX override).  This only affects metag and
     parisc.
   - Remove metag _STK_LIM_MAX override to match other arches and follow
     parisc, now that it is safe to do so (due to the BUG_ON fix
     mentioned above).
   - Finally now that both metag and parisc _STK_LIM_MAX overrides have
     been removed, it makes sense to remove _STK_LIM_MAX altogether"

* tag 'metag-for-v3.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag:
  asm-generic: remove _STK_LIM_MAX
  metag: Remove _STK_LIM_MAX override
  parisc,metag: Do not hardcode maximum userspace stack size
  metag: Reduce maximum stack size to 256MB
  metag: fix memory barriers

Pull drm/intel fixes from Dave Airlie:
 "Just some intel fixes.

  I have some radeon ones but I need to get some patches dropped from
  the pull req"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/i915: Increase WM memory latency values on SNB
  drm/i915: restore backlight precision when converting from ACPI
  drm/i915: Use the first mode if there is no preferred mode in the EDID
  drm/i915/dp: force eDP lane count to max available lanes on BDW
  drm/i915/vlv: reset VLV media force wake request register
  drm/i915/SDVO: For sysfs link put directory and target in correct order
  drm/i915: use lane count and link rate from VBT as minimums for eDP
  drm/i915: clean up VBT eDP link param decoding
  drm/i915: consider the source max DP lane count too

Pull x86 fixes from Peter Anvin.

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86-64, modify_ldt: Make support for 16-bit segments a runtime option
  x86, mm, hugetlb: Add missing TLB page invalidation for hugetlb_cow()
  x86, rdrand: When nordrand is specified, disable RDSEED as well

Pull timer fix from Thomas Gleixner:
 "A single bug fix for a long standing issue:

   - Updating the expiry value of a relative timer _after_ letting the
     idle logic select a target cpu for the timer based on its stale
     expiry value is outright stupid.  Thanks to Viresh for spotting the
     brainfart"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  hrtimer: Set expiry time before switch_hrtimer_base()

Pull irq fixes from Thomas Gleixner:
 "Two small updates from the irq departement:

   - Provide missing inline stub for a SMP only function

   - Add sub-maintainer for the drivers/irqchip/ part of the irq
     subsystem.  YAY!"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  MAINTAINERS: Add co-maintainer for drivers/irqchip
  genirq: Provide irq_force_affinity fallback for non-SMP

Intel fixes for regressions, black screens and hangs, for 3.15.

* tag 'drm-intel-fixes-2014-05-16' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Increase WM memory latency values on SNB
  drm/i915: restore backlight precision when converting from ACPI
  drm/i915: Use the first mode if there is no preferred mode in the EDID
  drm/i915/dp: force eDP lane count to max available lanes on BDW
  drm/i915/vlv: reset VLV media force wake request register
  drm/i915/SDVO: For sysfs link put directory and target in correct order
  drm/i915: use lane count and link rate from VBT as minimums for eDP
  drm/i915: clean up VBT eDP link param decoding
  drm/i915: consider the source max DP lane count too

The following happens when trying to run a kvm guest on a kernel
configured for 64k pages. This doesn't happen with 4k pages:

  BUG: failure at include/linux/mm.h:297/put_page_testzero()!
  Kernel panic - not syncing: BUG!
  CPU: 2 PID: 4228 Comm: qemu-system-aar Tainted: GF            3.13.0-0.rc7.31.sa2.k32v1.aarch64.debug #1
  Call trace:
  [<fffffe0000096034>] dump_backtrace+0x0/0x16c
  [<fffffe00000961b4>] show_stack+0x14/0x1c
  [<fffffe000066e648>] dump_stack+0x84/0xb0
  [<fffffe0000668678>] panic+0xf4/0x220
  [<fffffe000018ec78>] free_reserved_area+0x0/0x110
  [<fffffe000018edd8>] free_pages+0x50/0x88
  [<fffffe00000a759c>] kvm_free_stage2_pgd+0x30/0x40
  [<fffffe00000a5354>] kvm_arch_destroy_vm+0x18/0x44
  [<fffffe00000a1854>] kvm_put_kvm+0xf0/0x184
  [<fffffe00000a1938>] kvm_vm_release+0x10/0x1c
  [<fffffe00001edc1c>] __fput+0xb0/0x288
  [<fffffe00001ede4c>] ____fput+0xc/0x14
  [<fffffe00000d5a2c>] task_work_run+0xa8/0x11c
  [<fffffe0000095c14>] do_notify_resume+0x54/0x58

In arch/arm/kvm/mmu.c:unmap_range(), we end up doing an extra put_page()
on the stage2 pgd which leads to the BUG in put_page_testzero(). This
happens because a pud_huge() test in unmap_range() returns true when it
should always be false with 2-level pages tables used by 64k pages.
This patch removes support for huge puds if 2-level pagetables are
being used.
Signed-off-by: Mark Salter <msalter@redhat.com>
[catalin.marinas@arm.com: removed #ifndef around PUD_SIZE check]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: <stable@vger.kernel.org> # v3.11+

The attached change significantly improves the performance of the LWS-CAS code
in syscall.S.
This allows a number of packages to build (e.g., zeromq3, gtest and libxs)
that previously failed because slow LWS-CAS performance under contention. In
particular, interrupts taken while the lock was taken degraded performance
significantly.

The change does the following:

1) Disables interrupts around the CAS operation, and
2) Changes the loads and stores to use the ordered completer, "o", on
PA 2.0. "o" and "ma" with a zero offset are equivalent. The latter is
accepted on both PA 1.X and 2.0.

The use of ordered loads and stores probably makes no difference on all
existing hardware, but it seemed pedantically correct. In particular, the CAS
operation must complete before LDCW lock is released. As written before, a
processor could reorder the operations.

I don't believe the period interrupts are disabled is long enough to
significantly increase interrupt latency. For example, the TLB insert code is
longer. Worst case is a memory fault in the CAS operation.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # 3.13+
Signed-off-by: Helge Deller <deller@gmx.de>

Ratelimit printing of userspace segfaults and make it runtime
configurable via the /proc/sys/debug/exception-trace variable. This
should resolve syslog from growing way too fast and thus prevents
possible system service attacks.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # 3.13+

On SNB the BIOS provided WM memory latency values seem insufficient to
handle high resolution displays.

In this particular case the display mode was a 2560x1440@60Hz, which
makes the pixel clock 241.5 MHz. It was empirically found that a memory
latency value if 1.2 usec is enough to avoid underruns, whereas the BIOS
provided value of 0.7 usec was clearly too low. Incidentally 1.2 usec
is what the typical BIOS provided values are on IVB systems.

Increase the WM memory latency values to at least 1.2 usec on SNB.
Hopefully this won't have a significant effect on power consumption.

v2: Increase the latency values regardless of the pixel clock

Cc: Robert N <crshman@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70254Tested-by: Robert Navarro <crshman@gmail.com>
Tested-by: Vitaly Minko <vitaly.minko@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

When we set backlight on behalf of ACPI opregion, we will convert the
backlight value in the 0-255 range defined in opregion to the actual
hardware level. Commit 22505b82 (drm/i915: avoid brightness overflow
when doing scale) is meant to fix the overflow problem when doing the
conversion, but it also caused a problem that the converted hardware
level doesn't quite represent the intended value: say user wants maximum
backlight level(255 in opregion's range), then we will calculate the
actual hardware level to be: level = freq / max * level, where freq is
the hardware's max backlight level(937 on an user's box), and max and
level are all 255. The converted value should be 937 but the above
calculation will yield 765.

To fix this issue, just use 64 bits to do the calculation to keep the
precision and avoid overflow at the same time.

Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=72491Reported-by: Nico Schottelius <nico-bugzilla.kernel.org@schottelius.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

This matches the algorithm used by earlier kernels when selecting the
mode for the fbcon. And only if there is no modes at all, do we fall
back to using the BIOS configuration. Seamless transition is still
preserved (from the BIOS configuration to ours) so long as the BIOS has
also chosen what we hope is the native configuration.
Reported-by: Knut Petersen <Knut_Petersen@t-online.de>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78655Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: Knut Petersen <Knut_Petersen@t-online.de>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[Jani: applied Chris' "Please imagine that I wrote this correctly."]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

There are certain BDW high res eDP machines that regressed due to

commit 38aecea0
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Mon Mar 3 11:18:10 2014 +0100

    drm/i915: reverse dp link param selection, prefer fast over wide again

The commit lead to 2 lanes at 5.4 Gbps being used instead of 4 lanes at
2.7 Gbps on the affected machines. Link training succeeded for both, but
the screen remained blank with the former config. Further investigation
showed that 4 lanes at 5.4 Gbps worked also.

The root cause for the blank screen using 2 lanes remains unknown, but
apparently the driver for a certain other operating system by default
uses the max available lanes. Follow suit on Broadwell eDP, for at least
until we figure out what is going on.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76711Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Tested-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Checkin:

b3b42ac2 x86-64, modify_ldt: Ban 16-bit segments on 64-bit kernels

disabled 16-bit segments on 64-bit kernels due to an information
leak.  However, it does seem that people are genuinely using Wine to
run old 16-bit Windows programs on Linux.

A proper fix for this ("espfix64") is coming in the upcoming merge
window, but as a temporary fix, create a sysctl to allow the
administrator to re-enable support for 16-bit segments.

It adds a "/proc/sys/abi/ldt16" sysctl that defaults to zero (off). If
you hit this issue and care about your old Windows program more than
you care about a kernel stack address information leak, you can do

   echo 1 > /proc/sys/abi/ldt16

as root (add it to your startup scripts), and you should be ok.

The sysctl table is only added if you have COMPAT support enabled on
x86-64, but I assume anybody who runs old windows binaries very much
does that ;)
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/CA%2B55aFw9BPoD10U1LfHbOMpHWZkvJTkMcfCs9s3urPr1YyWBxw@mail.gmail.com
Cc: <stable@vger.kernel.org>

_STK_LIM_MAX could be used to override the RLIMIT_STACK hard limit from
an arch's include/uapi/asm-generic/resource.h file, but is no longer
used since both parisc and metag removed the override. Therefore remove
it entirely, setting the hard RLIMIT_STACK limit to RLIM_INFINITY
directly in include/asm-generic/resource.h.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-arch@vger.kernel.org
Cc: Helge Deller <deller@gmx.de>
Cc: John David Anglin <dave.anglin@bell.net>