Merge tag 'socfpga_updates_for_v4.20_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt

SoCFPGA DTS updates for v4.20, part 2
- Fix I2C bus unit-address warning with new DTC checks
- Add reset properties for timers

* tag 'socfpga_updates_for_v4.20_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  ARM: dts: socfpga: add timer resets for SoCFPGA platform
  ARM: dts: socfpga: Fix I2C bus unit-address error
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'sti-dt-for-v4.20-round1' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into next/dt

STi DT update:
 _ Change syntax of multiple DAI links

* tag 'sti-dt-for-v4.20-round1' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti:
  ARM: dts: stih410: change syntax of multiple DAI
Signed-off-by: Olof Johansson <olof@lixom.net>

AT91 DT for 4.20

 - warning fiwes from Rob
 - many updates for the axentia boards
 - ADC, I2S and touch screen support for sama5d2

* tag 'at91-4.20-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  arm: dts: sama5d2: Update coresight bindings for hardware ports
  ARM: dts: at91: sama5d27_som1_ek: add adc regulators
  ARM: dts: atmel: Fix I2C and SPI bus warnings
  ARM: dts: at91: sama5d4: add labels to soc dtsi for derivative boards
  ARM: dts: at91: tse850: drop three indentation levels
  ARM: dts: at91: nattis: drop three indentation levels
  ARM: dts: at91: nattis: describe the lvds panel
  ARM: dts: at91: nattis: move pinctrls for the lvds chip to the lvds node
  ARM: dts: at91: nattis: state the actual lvds-encoder chip
  ARM: dts: at91: nattis: make the SD-card slot work
  ARM: dts: at91: nattis: set the PRLUD and HIPOW signals low
  ARM: dts: at91/trivial: remove old NAND bindings leftover in sama5d2
  ARM: dts: at91/trivial: Fix USART1 definition for at91sam9g45
  ARM: dts: at91: sama5d2 Xplained: add pin muxing for I2S
  ARM: dts: at91: sama5d2: add nodes for I2S controllers
  ARM: dts: at91: sama5d2: add I2S clock muxing nodes
  ARM: dts: at91: sama5d2: Add resistive touch device
  ARM: dts: at91: sama5d2: add channel cells for ADC device
Signed-off-by: Olof Johansson <olof@lixom.net>

Commit a7eb2639 ("arm64: dts: broadcom: Add reference to Compute
Module IO Board V3") adds the bcm2837-rpi-cm3-io3.dts file as a target
in the Makefile, rather than the .dtb name. This will skip the
generation of the .dtb file at compile time and will fail the dtbs_install
target.

Fixes: a7eb2639 ("arm64: dts: broadcom: Add reference to Compute Module IO Board V3")
Signed-off-by: Liviu Dudau <liviu@dudau.co.uk>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

With change of syntax for 'simple-audio-card,dai-link' containers,
devicetrees of stih410 must be updated.

This fixes the following error:

[    3.839466] asoc-simple-card sound: asoc_simple_card_dai_link_of:
Can't find simple-audio-card,cpu DT node
[    3.849150] asoc-simple-card sound: parse error -22
Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>

Merge tag 'samsung-soc-4.20' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt

Samsung mach/soc changes for v4.20

1. Fix imprecise abort during Odroid XU3-family suspend to RAM (but it
   is not end of work needed for suspend).
2. Cleanup and fix of SD card write protect on MINI2440.

* tag 'samsung-soc-4.20' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: s3c24xx: Restore proper usage of pr_info/pr_cont
  ARM: s3c24xx: Correct SD card write protect detection on Mini2440
  ARM: s3c24xx: Consistently use tab for indenting member assignments
  ARM: s3c24xx: formatting cleanup in mach-mini2440.c
  ARM: s3c24xx: Remove empty gta02_pmu children probe
  ARM: exynos: Fix imprecise abort during Exynos5422 suspend to RAM
  ARM: exynos: Store Exynos5420 register state in one variable
Signed-off-by: Olof Johansson <olof@lixom.net>

ARM: DT: Hisilicon ARM32 SoCs updates for 4.20

- Switch to updated coresight bindings for hip04 SoC

* tag 'hisi-arm32-dt-for-4.20' of git://github.com/hisilicon/linux-hisi:
  arm: dts: hip04: Update coresight bindings for hardware ports
Signed-off-by: Olof Johansson <olof@lixom.net>

ARM64: DT: Hisilicon SoC DT updates for 4.20

- Add missing clocks for Hi6220
- Switch to updated coresight bindings for Hi6220
- Add DT bindings and support for Hi3670 SoC and HiKey970 board

* tag 'hisi-arm64-dt-for-4.20' of git://github.com/hisilicon/linux-hisi:
  arm64: dts: Add devicetree support for HiKey970 board
  dt-bindings: arm: hisilicon: Add binding for HiKey970 board
  arm64: dts: Add devicetree for Hisilicon Hi3670 SoC
  dt-bindings: arm: hisilicon: Add binding for Hi3670 SoC
  arm64: dts: hi6220: Update coresight bindings for hardware ports
  arm64: dts: hisilicon: Add missing clocks property for CPUs
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'stm32-dt-for-v4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/dt

STM32 DT updates for v4.20, round 1

Highlights:
----------

 - MCU platforms update:
  - Add missing clock node's lobel on stm32f429
  - Remove cd-inverted property for sdio nodes for all mcus
  - Fix stm32h7 rtc binding

 - MPU STM32MP157 platform update:
  - Enable display: CEC and DSI
  - Fix SPI node name to match with the new DTC

* tag 'stm32-dt-for-v4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
  ARM: dts: stm32: Fix SPI controller node names
  ARM: dts: stm32: enable display on stm32mp157c-ev1 board
  ARM: dts: stm32: update rtc st,syscfg property on stm32h743
  ARM: dts: stm32: Remove cd-inverted property for stm32f746-disco
  ARM: dts: stm32: Remove cd-inverted property for stm32f769-disco
  ARM: dts: stm32: Remove cd-inverted property for stm32f469-disco
  ARM: dts: stm32: Remove cd-inverted property for stm32429i-eval
  ARM: dts: stm32: Add clk-lse node's label on stm32f429
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'ux500-dts-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/dt

Ux500 DTS changes for the v4.20 kernel cycle.
Assorted housekeeping DTS patches.

* tag 'ux500-dts-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: dts: ux500: Mark PRCMU as syscon compatible
  arm: dts: ste: Update coresight bindings for hardware port
  ARM: dts: ste: Fix SPI controller node names
  ARM: dts: ux500: Get rid of DTC warnings
  ARM: dts: ux500: Fix LCDA clock line muxing
  dt-bindings: arm: scu: Correct example SCU unit addresses
  ARM: dts: ux500: Correct SCU unit address
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'aspeed-4.20-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into next/dt

ASPEED device tree updates for 4.20

 - Two new ast2500-based machines:

   * Facebook TiogaPass (x86 server)
   * HXT StarDragon 4800 Reference Evaluation Platform 2 (arm64 server)

 - Updates for the Quanta q71l system

 - i2c device tree cleanups

* tag 'aspeed-4.20-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
  ARM: dts: aspeed: Adding Facebook TiogaPass BMC
  ARM: dts: aspeed: Add HXT StarDragon 4800 REP2 BMC
  ARM: dts: aspeed: quanta-q71l: Enable adc & ibt nodes
  ARM: dts: aspeed: quanta-q71l: Add four PSUs
  ARM: dts: aspeed: quanta-q71l: add aliases for i2c
  ARM: dts: aspeed: Fix I2C bus warnings
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'am654-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into next/dt

TI AM654 support for v4.20 merge window.

This branch adds changes for the Texas Instruments AM654 SoC. Included
changes are:
- Add uart nodes
- Change address cells and size-cells of interconnect tfrom 1 to 2
- Add secure proxy instance for main domain
- Add DMSC support

* tag 'am654-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux:
  arm64: dts: ti: k3-am6: Add Device Management Security Controller support
  arm64: dts: ti: am654: Add secure proxy instance for main domain
  arm64: dts: ti: am654: Add uart nodes
  arm64: dts: ti: k3-am65: Change #address-cells and #size-cells of interconnect to 2
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'juno-updates-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/dt

ARMv8 Juno/Vexpress updates for v4.20

1. Enablement of scatter gather mode for CoreSight TMC-ETR routing

2. Usage of updated coresight graph bindings that eliminates loads of
   dtc warnings

* tag 'juno-updates-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  arm64: dts: juno: Enable coresight tmc scatter gather in ETR
  arm64: dts: juno: Update entries to match latest coresight bindings
Signed-off-by: Olof Johansson <olof@lixom.net>

This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 4.20, please pull the following:

- Stefan provides a reference to the Compute Module IO Board V3 such
  that we can reference the arm counterpart and still build it for arm64

- Rob fixes I2C and SPI bus warnings which are going to show up with his
  update to DTC scheduled for 4.20

* tag 'arm-soc/for-4.20/devicetree-arm64' of https://github.com/Broadcom/stblinux:
  arm64: dts: broadcom: Fix I2C and SPI bus warnings
  arm64: dts: broadcom: Add reference to Compute Module IO Board V3
Signed-off-by: Olof Johansson <olof@lixom.net>

This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 4.20, please pull the following:

- Rafal updates the Broadcom BCM5301x (Northstar) DTS files to use the
  new style partition parser and removes the unsupported/undocumented
  linux,part-probe properties that were previously introduced

- Stefan adds supports for the Raspberry Pi Compute Module 3/3Lite, he
  also updates the Raspberry Pi 3B+ USB Ethernet adapter to have proper
  LED configuration

- Rob fixes a bunch of SPI bus warnings in the Northstar Plus and
  Hurricane 2 DTS files

- Florian documents the Broadcom roboswitch Switch Register Access Block
  (SRAB) interrupts, adds the switch interrupts to the Northstar Plus
  DTS include file and finally updates the BCM958625HR reference board to
  have the proper SFP module definition

* tag 'arm-soc/for-4.20/devicetree' of https://github.com/Broadcom/stblinux:
  ARM: dts: bcm: Fix SPI bus warnings
  ARM: dts: NSP: Wire up switch interrupts
  dt-bindings: net: dsa: Document B53 SRAB interrupts and registers
  ARM: dts: NSP: Enable SFP on bcm958625hr
  ARM: dts: bcm283x-rpi-lan7515: Enable Ethernet LEDs
  ARM: dts: BCM5301X: Specify flash partitions
  ARM: dts: add Raspberry Pi Compute Module 3 and IO board
  dt-bindings: bcm: Add Raspberry Pi CM3 and CM3L
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt

Amlogic ARM64 DT updates for v4.20
- AXG: cleanup/reorder nodes
- AXG: add audio PDM support for s400 board
- GX: increase CMA memory size
- GX: new canvas driver

* tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  arm64: dts: meson: Switch simple-mfd and syscon order
  arm64: dts: meson-axg-s400: Add chosen and memory nodes
  arm64: dts: meson-axg: use the proper compatible for ethmac
  arm64: dts: meson-axg: s400: add pdm to the sound card
  arm64: dts: meson-axg: s400: add dmic codec
  arm64: dts: meson-axg: add pdm
  arm64: dts: meson-gx: add dmcbus and canvas nodes.
  arm64: dts: meson: libretech: update board model
  arm64: dts: meson-gx: increase default shared CMA pool size
  arm64: dts: meson-axg: sort nodes consistently
  arm64: dts: meson-axg: s400: add sound card
  arm64: dts: meson-axg: s400: enable audio devices
  arm64: dts: meson-axg: add audio fifos
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'v4.20-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

New soc support for the px30 quad-core Cortex-A35.
New boards are the px30 eval board and roc-rk3399-pc.
The rk3328 got support for the one gpio controlled via the general
register files and the rk3399 finally got its idle-states defined.
And finally fixes and improvements for firefly-rk3399 (wifi),
roc-rk3328-cc (sdmmc-uhs, io-domains), rk3328-rock64 (gpio-regulator
pin fix) and rk3399-sapphire (gpio-regulator pin fix, pmic pin fix
and type-c port supply).

* tag 'v4.20-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: Add type-c port supply on rk3399-sapphire board
  arm64: dts: rockchip: fix vcc_host1_5v pin assign on rk3328-rock64
  arm64: dts: rockchip: add WiFi module support for Firefly-RK3399
  arm64: dts: rockchip: remove dvs2 pinctrl from pmic on rk3399-sapphire
  arm64: dts: rockchip: Fix VCC5V0_HOST_EN on rk3399-sapphire
  arm64: dts: rockchip: re-order vcc_sys on rk3399-sapphire
  arm64: dts: rockchip: add missing vop properties for px30
  arm64: dts: rockchip: Add idle-states to device tree for rk3399
  arm64: dts: rockchip: add sdmmc UHS support for roc-rk3328-cc
  arm64: dts: rockchip: add GRF GPIO controller to rk3328
  arm64: dts: rockchip: add io-domain to roc-rk3328-cc
  arm64: dts: rockchip: add PX30 evaluation board devicetree
  arm64: dts: rockchip: add core dtsi file for PX30 SoCs
  dt-bindings: rockchip: grf: add grf and pmugrf description for px30
  arm64: dts: rockchip: add support for ROC-RK3399-PC board
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-arm64-dt-for-v4.20' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Renesas ARM64 Based SoC DT Updates for v4.20

* Correct whitespace around assignments

* R-Car Gen-3 SoCs:
  - Enable SDR104 for SD devices
  - Include R-Car product name in DTSI files to ease maintenance
* R-Car Gen-3 SoC based boards: Convert to new LVDS DT bindings
* R-Car Gen 3 Salvator-X and Salvator-XS boards:
  - Override secondary addresses of ADV748x to avoid address conflicts
* R-Car Gen 3 based Salvator-XS board: Enable SATA

* R-Car M3-N (r8a77965) SoC:
  - Add FDP1 device nodes
  - Move arm_cc630p and timer nodes to restore sort-order of file
  - Correct clock/reset for usb2_phy1
  - Correct HS-USB compat string
  - Add OPPs table for cpu devices enabling CPUFreq support
  - Add CAN device placeholder nodes to facilitate adding
    initial device tree for KF daughter board
  - Attach SYS-DMAC to the IPMMU
* R-Car M3-N (r8a77965) based ULCB board:
  - Initial device tree for board and KF daughter board

* R-Car E3 (r8a77990) SoC:
  - Add SYS-DMAC, I2C VIN, CSI-2, MSIOF device nodes
  - Add BRG support to SCIF2 which allows an increase in serial clock accuracy
  - Use CPG/MSSR and SYSC binding definitions
* R-Car E3 (r8a77990) based Ebisu board: Enable PWM

* R-Car D3 (r8a77995) SoC: Attach the SYS-DMAC to the IPMMU
* R-Car D3 (r8a77995) based Draak board: Sort device nodes

* R-Car V3H (r8a77980) based V3HSK board:
  - Move lvds0 node to restore sort-order of file
* R-Car V3H (r8a77980) SoC:
  - Add RWDT, CSI2 and VIN, Cortex-A53 PMU nodes
  - Move IPMMU and CAN clock nodes to restore sort-order of file

* R-Car V3M (r8a77970) SoC:
  - Add MMC nodes
  - Move CAN clock node to restore sort-order of file
* R-Car V3M (r8a77970) based V3MSK board: Add eMMC support
* R-Car V3H (r8a77980) based Condor board: Add PCIe, DU, LVDS and HDMI support

* RZ/G2M (r8a774a1) SoC:
  - Initial device tree
  - Add SYS-DMAC, SCIF, HSCIF, INTC-EX, EtherAVB, RWDT, pinctl, GPIO,
    SDHI, I2C, IIC-DVFS, thermal, IPMMU, MSIOF, Cortex-A53 CPU core,
    PWM, Audio, FCPF, FCPV, USB2.0, USB-DMAC, HSUSB and USB3.0 device nodes

* tag 'renesas-arm64-dt-for-v4.20' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (58 commits)
  arm64: dts: r8a77965: add FDP1 device nodes
  arm64: dts: renesas: draak: Sort device nodes
  arm64: dts: renesas: enable SDR104 on R-Car Gen3
  arm64: dts: renesas: r8a77990: Add SYS-DMAC device nodes
  arm64: dts: renesas: r8a77990: Add I2C device nodes
  arm64: dts: renesas: r8a77990: Add VIN and CSI-2 device nodes
  arm64: dts: renesas: r8a77990: Add all MSIOF nodes
  arm64: dts: renesas: r8a7795: Move arm_cc630p node
  arm64: dts: renesas: r8a77990: Add BRG support to SCIF2
  arm64: dts: renesas: r8a77990: Use CPG/MSSR and SYSC binding definitions
  arm64: dts: renesas: salvator-xs: Improve SATA switch settings comments
  arm64: dts: renesas: r8a77965: Fix clock/reset for usb2_phy1
  arm64: dts: renesas: r8a77965: Fix HS-USB compatible
  arm64: dts: renesas: r8a77965: Move timer node
  arm64: dts: renesas: v3hsk: Move lvds0 node
  arm64: dts: renesas: Fix whitespace around assignments
  arm64: dts: renesas: r8a77965: m3nulcb-kf: Initial device tree
  arm64: dts: renesas: condor: add PCIe support
  arm64: dts: renesas: r8a77980: add PCIe support
  arm64: dts: renesas: r8a774a1: Add USB3.0 device nodes
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-arm-dt-for-v4.20' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Renesas ARM Based SoC DT Updates for v4.20

* R-Car Gen1 SoCs: Include product name in DTSI files for ease of maintenance
* R-Car Gen2 SoCs:
  - Convert to new DU DT bindings
  - Correct SATA device sizes to 2 MiB
* R-Car H2 (r8a7790) based Porter board: Add DA9063 OnKey PMIC node
* R-Car E2 (r8a7794) based Silk board: Add DA9063 PMIC, RTC and OnKey nodes
* R-Car M2-N (r8a7793) based Gose board: Add DA9210 node for CPU DVFS
* RZ/G1C (R8A77470) SoC:
  - Add GPIO nodes
  - Add PFC support
  - Use r8a77470-sysc binding definitions
* RZ/G1C (r8a77470) iW-RainboW-G23S dev platform:
  - Specify EtherAVB PHY IRQ
  - Add pinctl support for scif1
* RZ/N1D (r9a06g032) SoC: Use r9a06g032-sysctrl binding definitions

* tag 'renesas-arm-dt-for-v4.20' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: dts: r9a06g032: Use r9a06g032-sysctrl binding definitions
  ARM: dts: Include R-Car Gen1 product name in DTSI files
  ARM: dts: stout: Add DA9063 OnKey node
  ARM: dts: silk: Add DA9063 RTC and OnKey node
  ARM: dts: iwg23s-sbc: specify EtherAVB PHY IRQ
  ARM: dts: r8a77470: Add GPIO support
  ARM: dts: silk: Add DA9063 PMIC node
  ARM: dts: gose: Add DA9210 node for CPU DVFS
  ARM: dts: rcar-gen2: Convert to new DU DT bindings
  ARM: dts: iwg23s-sbc: Add pinctl support for scif1
  ARM: dts: r8a77470: Add PFC support
  ARM: dts: r8a77470: Use r8a77470-sysc binding definitions
  ARM: dts: rcar: Correct SATA device sizes to 2 MiB
Signed-off-by: Olof Johansson <olof@lixom.net>

SPI controller nodes should be named 'spi' rather than 'qspi'. Fixing the
name enables dtc SPI bus checks.

Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Enable panel raydium RM68200, DSI bridge & display controller.
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

We need to distribute out the responsibilities of the PRCMU
registers instead of having one big lump handling everything.
By making it syscon compatible, we can start grabbing the
register map elsewhere when needed.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Switch to the new coresight bindings

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

By removing the reference to skeleton.dtsi, defining chosen {}
and proper memory nodes we get warning-free device trees for
the Ux500.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The "lcdaclk_b_1" group is muxed with the function "lcd"
but needs a separate entry to be muxed in with "lcda"
rather than "lcd".
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The unit addresses of the Cortex-A9 SCU device nodes contain too many
zeroes.  Remove them.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The unit address of the Cortex-A9 SCU device node contains one zero too
many.  Remove it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Initial introduction of Facebook TiogaPass family equipped with
Aspeed 2500 BMC SoC. TiogaPass is a x86 server development kit
with a ASPEED ast2500 BMC manufactured by Facebook.

Specifically, This adds the TiogaPass platform device tree file
including the flash layout used by the TiogaPass BMC machines.
Signed-off-by: Vijay Khemka <vijaykhemka@fb.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>

The HXT StarDragon 4800 REP2 (Reference Evaluation Platform) is
an aarch64 ARMv8 server platform with an ast2520 BMC.
Signed-off-by: Yuan Yao <yao.yuan@linaro.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>

To fit with latest rtc driver updates, rtc st,syscfg property must contain
the control register offset of pwrcfg and the mask corresponding to the
DBP (Disable Backup Protection) bit.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Remove cd-inverted property and update cd-gpios active level
accordingly
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Remove cd-inverted property and update cd-gpios active level
accordingly
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Remove cd-inverted property and update cd-gpios active level
accordingly
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Remove cd-inverted property and update cd-gpios active level
accordingly
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Add missing clk_lse label for node clk-lse.
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Switch to the new coresight bindings for hardware ports

Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Fix wrong usage of pr_info introduced by the commit e728e4f2 ("ARM:
s3c24xx: formatting cleanup in mach-mini2440.c").

Since the idea is to print on a single line, pr_cont has to be used.
Signed-off-by: Cedric Roux <sed@free.fr>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Add fixed regulators for the ADC. This board does not have
a programmable PMIC, but fixed regulators.
Adding them to DT so the ADC can probe correctly.
Tested-by: Swapna Gurumani <swapna.gurumani@microchip.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

dtc has new checks for I2C and SPI buses. Fix the warnings in node names
and unit-addresses.

arch/arm/boot/dts/at91-dvk_som60.dtb: Warning (i2c_bus_reg): /ahb/apb/i2c@f0018000/eeprom@87: I2C bus unit address format error, expected "57"
arch/arm/boot/dts/at91-dvk_som60.dtb: Warning (i2c_bus_reg): /ahb/apb/i2c@f0018000/ft5426@56: I2C bus unit address format error, expected "38"
arch/arm/boot/dts/at91-vinco.dtb: Warning (i2c_bus_reg): /ahb/apb/i2c@f8024000/rtc@64: I2C bus unit address format error, expected "32"
arch/arm/boot/dts/at91sam9260ek.dtb: Warning (spi_bus_reg): /ahb/apb/spi@fffc8000/mtd_dataflash@0: SPI bus unit address format error, expected "1"
arch/arm/boot/dts/at91sam9g20ek_2mmc.dtb: Warning (spi_bus_reg): /ahb/apb/spi@fffc8000/mtd_dataflash@0: SPI bus unit address format error, expected "1"
arch/arm/boot/dts/at91sam9g20ek.dtb: Warning (spi_bus_reg): /ahb/apb/spi@fffc8000/mtd_dataflash@0: SPI bus unit address format error, expected "1"
arch/arm/boot/dts/at91sam9261ek.dtb: Warning (spi_bus_reg): /ahb/apb/spi@fffc8000/tsc2046@0: SPI bus unit address format error, expected "2"
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>