Pull USB fixes from Greg Kroah-Hartman:
 "Here are some small USB gadget bugfixes, and a few new USB device ids
  added to some drivers for the 3.5-rc5 release.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'usb-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: CP210x Add 10 Device IDs
  USB: option: Add USB ID for Novatel Ovation MC551
  usb: phy: Fix Kconfig dependency for Phy drivers
  usb-storage: revert commit afff07e6 (Add 090c:1000 to unusal-devs)
  SCSI & usb-storage: add try_rc_10_first flag
  usb: musb: host: release dma channels if no active io
  usb: gadget: lpc32xx_udc: fix build error with debugfs enabled
  usb: otg: twl6030-usb: Fix twl writes
  USB: option: add id for Cellient MEN-200
  usb: dwc3: fix giveback of queued request in ep_dequeue
  usb: gadget: Complete fsl qe/udc driver conversion

Pull sound fixes from Takashi Iwai:
 "Here you find quite a few changes for HD-audio and a copule of quirk
  additions for USB-audio.  All reasonably small and/or trivial."

* tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Fix power-map regression for HP dv6 & co
  ALSA: hda - Initialize caches at codec reconfiguration
  ALSA: hda - Fix memory leaks at module unload
  ALSA: hda - Fix memory leaks in Realtek & Conexant codec parsers
  ALSA: hda - Add Realtek ALC280 codec support
  ALSA: hda - Remove obsoleted CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS
  ASoC: wm8994: remove duplicate code
  ALSA: usb-audio: add BOSS GT-100 support
  ALSA: HDA: Add inverted internal mic quirk for Lenovo S205
  ALSA: hda - Fix ALC272X codec detection
  ALSA: snd_usb_audio: ignore ctrl errors on QuickCam Pro for Notebooks
  ALSA: snd_usb_audio: ignore ctrl errors on QuickCam E3500

Pull a m68knommu fix from Greg Ungerer:
 "It contains a single fix for breakage using the Freescale FEC eth
  driver on ColdFire CPUs."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: define a local devm_clk_get() function

Pull MMC fixes from Chris Ball:

 - omap_hsmmc: Using AUTO_CMD12 (enabled by default in 3.5-rc1) has
   been found to cause data corruption on the BeagleBoard, but no
   other OMAP boards so far.  Revert the patch until there's a root
   cause explanation that makes sense, at which point we might
   decide to use a blacklist or whitelist.

 - mmc_block: Fix incorrect data timeouts for the case of multiblock
   (ACMD22) writes for block-addressed cards.

* tag 'mmc-fixes-for-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
  Revert "mmc: omap_hsmmc: Enable Auto CMD12"
  mmc: block: fix the data timeout issue with ACMD22

Pull clk common framework fixes from Mike Turquette:
 "This contains three NULL pointer fixes and two device regression
  fixups.

  Two NULL pointer dereferences were in the common clk core due to lack
  of sanity checking and the third NPD was in the mxs-specific clock
  code due to incorrect use of __initdata.

  The device regressions were the result of improper data: a wrong
  string name for matching DT data broke the SPEAr ethernet controller
  and another string matching problem in the mxs clock data resulted in
  a broken MMC controller."

* tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux:
  clk: mxs: fix clock lookup after freeing init memory
  clk: mxs: fix ref_io clock definition
  clk: Check parent for NULL in clk_change_rate
  clk: Allow late cache allocation for clk->parents
  clk: SPEAr600: Fix ethernet clock name for DT based probing

This script lacks an executable bit.
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch adds 10 device IDs for CP210x based devices from the following manufacturers:
Timewave
Clipsal
Festo
Link Instruments
Signed-off-by: Craig Shelley <craig@microtron.org.uk>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This device is also known as the Verizon USB551L.
Signed-off-by: Forest Bond <forest.bond@rapidrollout.com>
Acked-by: Dan Williams <dcbw@redhat.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB phy layer driver are only built if usb host is selected, but they
are used too by USB_GADGET drivers
Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
Acked-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch reverts the commit dba3c29e.

After bisecting, this commit dba3c29e is found to ruin micro-SD card data
(writing incorrect file, or fs is corrupt after several times mount)
on the beagle-xm revB, and reverting the commit will fix the problem.

Also from TRM of OMAP3/OMAP4/DM37x, the below is mentioned about
the Auto CMD12 Enable bit.
        - SDIO does not support this feature.
        - SD card only.
Looks it is not suitable to always enable Auto CMD12 in host controller
driver.

Considered that the commit is not mature enough, so ask to revert it
first.

Cc: Balaji T K <balajitk@ti.com>
Cc: Venkatraman S <svenkatr@ti.com>
Buglink: https://lkml.org/lkml/2012/6/10/225Reported-by: Paolo Pisati <p.pisati@gmail.com>
Reported-bisected-and-tested-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Acked-by: Venkatraman S <svenkatr@ti.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

If multi block write operation fails for SD card, during
error handling we send the SD_APP_SEND_NUM_WR_BLKS (ACMD22)
to know how many blocks were already programmed by card.

But mmc_sd_num_wr_blocks() function which sends the ACMD22
calculates the data timeout value from csd.tacc_ns and
csd.tacc_clks parameters which will be 0 for block addressed
(>2GB cards) SD card. This would result in timeout_ns and
timeout_clks being 0 in the mmc_request passed to host driver.
This means host controller would program its data timeout timer
value with 0 which could result in DATA TIMEOUT errors from
controller.

To fix this issue, mmc_sd_num_wr_blocks() should instead
just call the mmc_set_data_timeout() to calculate the
data timeout value. mmc_set_data_timeout() function
ensures that non zero timeout value is set even for
block addressed SD cards.
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Reviewed-by: Venkatraman S <svenkatr@ti.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

Pull drm fixes from Dave Airlie:
 "Just two changes: one udl endian fix, one nouveau memory corruption on
  some GPUs."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/nouveau/fbcon: using nv_two_heads is not a good idea
  drm/udl: Make sure to get correct endian keys from vendor descriptor

Pull HID fixes from Jiri Kosina:
 "The most important one is a purification of Kconfig for CONFIG_HID;
  the inclusion of HID groups and autoloading didn't leave the Kconfig
  in a really consistent state.  Henrik's patch fixes that.  In addition
  to that, there are two small fixes for logitech and magicmouse
  drivers."

* 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: Fix the generic Kconfig options
  HID: magicmouse: Correct report range of major / minor axes
  HID: logitech: don't use stack based dj_report structures

The recent fix for power-map controls (commit b0791dda) caused
regressions on some other HP laptops.  They have fixed pins but these
pins are exposed as jack-detectable.  Thus the driver tries to control
the power-map dynamically per jack detection where it never gets on.

This patch adds the check of connection and it assumes the no jack
detection is available for fixed pins no matter what pin capability
says.

BugLink: http://bugs.launchpad.net/bugs/1013183Reported-by: Luis Henriques <luis.henriques@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Better to clean up the caches for avoiding inconsistent codec state
after the reconfiguration.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Some caches aren't released properly at module unloading time.

Cc: <stable@vger.kernel.org> [v3.4+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>

When moved to the helper code, forgot to release the verb arrays.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

nv_two_heads() was never meant to be used outside of pre-nv50 code.  The
code checks for >= NV_10 for 2 CRTCs, then downgrades a few specific
chipsets to 1 CRTC based on (pci_device & 0x0ff0).

The breakage example seen is on GTX 560Ti, with a pciid of 0x1200, which
gets detected as an NV20 (0x020x) with 1 CRTC by nv_two_heads(), causing
memory corruption because there's actually 2 CRTCs..

This switches fbcon to use the CRTC count directly from the mode_config
structure, which will also fix the same issue on Kepler boards which have
4 CRTCs.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

The struct clk_lookup are marked as __initdata, resulting in being
removed from memory after the kernel finished booting. However this
leads to a NULL pointer de-ref if loading a module which uses clk_get.

This patch removes the __initdata from the struct clk_lookup.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

The definition of clocks ref_io0 and ref_io1 were inverted.  It causes
a mmc regression on some boards right away.  Fix the regression by
correcting the ref_io clock definition.
Reported-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

clk_change_rate() is accessing parent's rate without checking
if the parent exists at all. In case of root clocks this will
cause NULL pointer dereference.

This patch follows what clk_calc_new_rates() does in such
situation.
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Cc: stable@kernel.org

Parent clocks for muxes are cached in clk->parents to
avoid frequent lookups, however the cache allocation happens
only during clock registeration and later clk_set_parent()
assumes a cache space available and allocated.

This is not entirely true for platforms which do early clock
registerations wherein the cache allocation using kzalloc
could fail during clock registeration.

Allow cache allocation to happen later as part of clk_set_parent()
to help such cases and avoid crashes assuming a cache being
available.

While here also replace existing kmalloc() with kzalloc()
in the file.
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Cc: stable@kernel.org

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Viresh Kumar <viresh.kumar@st.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

Pull media fixes from Mauro Carvalho Chehab.

Trivial conflict due to new USB HID ID's being added next to each other
(Baanto vs Axentia).

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (44 commits)
  [media] smia: Fix compile failures
  [media]  Fix VIDIOC_DQEVENT docbook entry
  [media] s5p-fimc: Fix control creation function
  [media] s5p-mfc: Fix checkpatch error in s5p_mfc_shm.h file
  [media] s5p-mfc: Fix setting controls
  [media] v4l/s5p-mfc: added image size align in VIDIOC_TRY_FMT
  [media] v4l/s5p-mfc: corrected encoder v4l control definitions
  [media] v4l: mem2mem_testdev: Fix race conditions in driver
  [media] s5p-mfc: Bug fix of timestamp/timecode copy mechanism
  [media] cxd2820r: Fix an incorrect modulation type bitmask
  [media] em28xx: Show a warning if the board does not support remote controls
  [media] em28xx: Add remote control support for Terratec's Cinergy HTC Stick HD
  [media] USB: Staging: media: lirc: initialize spinlocks before usage
  [media] Revert "[media] media: mx2_camera: Fix mbus format handling"
  [media] bw-qcam: driver and pixfmt documentation fixes
  [media] cx88: fix firmware load on big-endian systems
  [media] cx18: support big-endian systems
  [media] ivtv: fix support for big-endian systems
  [media] tuner-core: return the frequency range of the correct tuner
  [media] v4l2-dev.c: fix g_parm regression in determine_valid_ioctls()
  ...

This chip looks very similar to ALC269 and ALC27* variants. The bug reporter
has verified that sound was working after this patch had been applied.

Cc: stable@kernel.org
BugLink: https://bugs.launchpad.net/bugs/1017017Tested-by: Richard Crossley <richardcrossley@o2.co.uk>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Pull regulator fixes from Mark Brown:
 "A few small, driver specific bug fixes, nothing exciting here but all
  needed if you happen to be using the affected hardware."

* tag 'regulator-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: palmas: fix regmap offsets for enable/disable
  regulator: tps6524x: Fix get_voltage_sel for fixed voltage
  regulator: tps65023: Fix mask for LDOs output voltage select control

Git pull DMA-mapping fix from Marek Szyprowski:
 "Another minor fixup for ARM dma-mapping redesign and extensions merged
  in this merge window"

* 'fixes-for-linus' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  ARM: dma-mapping: fix buffer chunk allocation order

Commit 2603efa3 ("bug.h: Fix up powerpc build regression") corrected
the powerpc build case and extended the __ASSEMBLY__ guards, but it also
got caught in pre-processor hell accidentally matching the else case of
CONFIG_BUG resulting in the BUG disabled case tripping up on
-Werror=implicit-function-declaration.

It's not possible to __ASSEMBLY__ guard the entire file as architecture
code needs to get at the BUGFLAG_WARNING definition in the GENERIC_BUG
case, but the rest of the CONFIG_BUG=y/n case needs to be guarded.

Rather than littering endless __ASSEMBLY__ checks in each of the if/else
cases we just move the BUGFLAG definitions up under their own
GENERIC_BUG test and then shove everything else under one big
__ASSEMBLY__ guard.

Build tested on all of x86 CONFIG_BUG=y, CONFIG_BUG=n, powerpc (due to
it's dependence on BUGFLAG definitions in assembly code), and sh (due to
not bringing in linux/kernel.h to satisfy the taint flag definitions used
by the generic bug code).

Hopefully that's the end of the corner cases and I can abstain from ever
having to touch this infernal header ever again.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Tested-by: Fengguang Wu <wfg@linux.intel.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is needed to sync up with the previous USB changes that were merged in
Linus's branch.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The generic HID driver is obviously not a special driver, so move it
outside of the special drivers menu. Explain the usage and make the
default follow the HID setting. This should simplify migration from
older kernels. While at it, remove the redundant HID_SUPPORT option
and modify the HID and USB_HID entries to better explain the bus
structure.
Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

In patch "HID: magicmouse: Adjust major / minor axes to scale",
touch_major and touch_minor axes are scaled by a factor of
four when reported but the max touch_major/minor is not scaled
accordingly. This patch scales the max touch_major/minor to
be consistent with the reported value.
Signed-off-by: Yufeng Shen <miletus@chromium.org>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

I simply forgot to remove this entry although all Realtek quirks have
been dropped.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

It seems that the code duplication was added at a merge operation.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Reported-by: John McFarland <mcfarljm@gmail.com>
Tested-by: John McFarland <mcfarljm@gmail.com>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

IOMMU-aware dma_alloc_attrs() implementation allocates buffers in
power-of-two chunks to improve performance and take advantage of large
page mappings provided by some IOMMU hardware. However current code, due
to a subtle bug, allocated those chunks in the smallest-to-largest
order, what completely killed all the advantages of using larger than
page chunks. If a 4KiB chunk has been mapped as a first chunk, the
consecutive chunks are not aligned correctly to the power-of-two which
match their size and IOMMU drivers were not able to use internal
mappings of size other than the 4KiB (largest common denominator of
alignment and chunk size).

This patch fixes this issue by changing to the correct largest-to-smallest
chunk size allocation sequence.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>

This is a port of
commit b49f184b
Author: Ben Collins <bcollins@ubuntu.com>
from udlfb to udl kms driver.

The driver was not using le16_to_cpu when reading keys from the vendor
descriptor, causing incorrect parsing. Mainly, sku_pixel_limit was not
being parsed on big-endian systems. This would result in a blank screen
on big-endian CPUs where the DL chips's max mode was smaller than the
monitor's native mode.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Commit f4d40de3 ("net fec: do not depend
on grouped clocks") breaks compilation of the FEC driver for non iMX
platforms in linux-3.5-rc1. For example when compiling for ColdFire I get:

      LD      vmlinux
    drivers/built-in.o: In function `fec_probe':
    fec.c:(.devinit.text+0x1e0): undefined reference to `devm_clk_get'

Define a simple devm_clk_get() function for the m68knommu architecture.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>

Coult -> Could
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull KVM fixes from Avi Kivity:
 "Fixing a scheduling-while-atomic bug in the ppc code, and a bug which
  allowed pci bridges to be assigned to guests."

* git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: PPC: Book3S HV: Drop locks around call to kvmppc_pin_guest_page
  KVM: Fix PCI header check on device assignment