Move docs for cops and ltpc under device_drivers/appletalk.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move docs for hinic and altera_tse under device_drivers/ethernet.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move ray_cs into Wi-Fi driver docs subdirectory.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move baycom to hamradio.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move z8530 docs to hamradio and wan subdirectories.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Organize driver documentation by device type. Most documents
have fairly verbose yet uninformative names, so let users
first select a well defined device type, and then search for
a particular driver.

While at it rename the section from Vendor drivers to
Hardware drivers. This seems more accurate, besides people
sometimes refer to out-of-tree drivers as vendor drivers.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Bartosz Golaszewski says:

====================
net: phy: relax PHY and MDIO reset handling

Previously these patches were submitted as part of a larger series[1]
but since the approach in it will have to be reworked I'm resending
the ones that were non-controversial and have been reviewed for upstream.

Florian suggested a better solution for managing multiple resets. While
I will definitely try to implement something at the driver model's bus
level (together with regulator support), the 'resets' and 'reset-gpios'
DT property is a stable ABI defined in mdio.yaml so improving its support
is in order as we'll have to stick with it anyway. Current implementation
contains an unnecessary limitation where drivers without probe() can't
define resets.

Changes from the previous version:
- order forward declarations in patch 4 alphabetically
- collect review tags

[1] https://lkml.org/lkml/2020/6/22/253
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Similarily to PHY drivers - there's no reason to require probe() to be
implemented in order to call mdio_device_reset(). MDIO devices can have
resets defined without needing to do anything in probe().
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently we only call phy_device_reset() if the PHY driver implements
the probe() callback. This is not mandatory and many drivers (e.g.
realtek) don't need probe() for most devices but still can have reset
GPIOs defined. There's no reason to depend on the presence of probe()
here so pull the reset code out of the if clause.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This header refers to struct reset_control but doesn't include any reset
header. The structure definition is probably somehow indirectly pulled in
since no warnings are reported but for the sake of correctness add the
forward declaration for struct reset_control.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Keeping the headers in alphabetical order is better for readability and
allows to easily see if given header is already included.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Keeping the headers in alphabetical order is better for readability and
allows to easily see if given header is already included.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Keeping the headers in alphabetical order is better for readability and
allows to easily see if given header is already included.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some PHYs connected to this ethernet hardware support the WoL feature.
But when WoL is enabled and the machine is powered off, the PHY remains
waiting for a magic packet at max speed (i.e. 1Gbps), which is a waste of
energy.

Slow down the PHY speed before stopping the ethernet if WoL is enabled,
and save some energy while the machine is powered off or sleeping.

Tested using an Armada 370 based board (LS421DE) equipped with a Marvell
88E1518 PHY.
Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
40GbE Intel Wired LAN Driver Updates 2020-06-25

This series contains updates to i40e driver and removes the individual
driver versions from all of the Intel wired LAN drivers.

Shiraz moves the client header so that it can easily be shared between
the i40e LAN driver and i40iw RDMA driver.

Jesse cleans up the unused defines, since they are just dead weight.

Alek reduces the unreasonably long wait time for a PF reset after reboot
by using jiffies to limit the maximum wait time for the PF reset to
succeed.  Added additional logging to let the user know when the driver
transitions into recovery mode.  Adds new device support for our 5 Gbps
NICs.

Todd adds a check to see if MFS is set after warm reboot and notifies
the user when MFS is set to anything lower than the default value.

Arkadiusz fixes a possible race condition, where were holding a
spin-lock while in atomic context.

v2: removed code comments that were no longer applicable in patch 2 of
    the series.  Also removed 'inline' from patch 4 and patch 8 of the
    series.  Also re-arranged code to be able to remove the forward
    function declarations.  Dropped patch 9 of the series, while the
    author works on cleaning up the commit message.
v3: Updated patch 8 description to answer Jakub's questions
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Clang warns:

drivers/net/bonding/bond_main.c:4657:23: warning: equality comparison
with extraneous parentheses [-Wparentheses-equality]
        if ((BOND_MODE(bond) == BOND_MODE_ACTIVEBACKUP))
             ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~

drivers/net/bonding/bond_main.c:4681:23: warning: equality comparison
with extraneous parentheses [-Wparentheses-equality]
        if ((BOND_MODE(bond) == BOND_MODE_ACTIVEBACKUP))
             ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~

This warning occurs when a comparision has two sets of parentheses,
which is usually the convention for doing an assignment within an
if statement. Since equality comparisons do not need a second set of
parentheses, remove them to fix the warning.

Fixes: 18cb261a ("bonding: support hardware encryption offload to slaves")
Link: https://github.com/ClangBuiltLinux/linux/issues/1066Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reported-by: kernelci.org bot <bot@kernelci.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simplify meson8b_init_rgmii_tx_clk() by using struct clk_parent_data to
initialize the clock parents. No functional changes intended.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With legacy PM, drivers themselves were responsible for managing the
device's power states and takes care of register states.

After upgrading to the generic structure, PCI core will take care of
required tasks and drivers should do only device-specific operations.

The driver was also calling bnx2x_set_power_state() to set the power state
of the device by changing the device's registers' value. It is no more
needed.

Compile-tested only.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Acked-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In some occasions task held spinlock (mac_filter_hash_lock),
while being rescheduled due to admin queue mutex_lock.  The struct
i40e_spinlock asq_spinlock, which later expands to struct mutex
spinlock.  Moved i40e_aq_set_vsi_multicast_promiscuous(),
i40e_aq_set_vsi_unicast_promiscuous(),
i40e_aq_set_vsi_mc_promisc_on_vlan(), and
i40e_aq_set_vsi_uc_promisc_on_vlan() outside of atomic context.  Without
this patch there is a race condition, which might result in scheduling
while in atomic context.  The race condition is between the thread, which
holds mac_filter_hash_lock, while trying to acquire an admin queue mutex
and a thread, which already has said admin queue mutex. The thread, which
holds spinlock, fails to acquire the mutex, which causes this thread to
sleep.
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Make possible for the i40e driver to bind to the new v710 for 5GBASE-T
NICs.
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

As with other networking drivers, remove the unnecessary driver version
from the Intel drivers. The ethtool driver information and module version
will then report the kernel version instead.

For ixgbe, i40e and ice drivers, the driver passes the driver version to
the firmware to confirm that we are up and running.  So we now pass the
value of UTS_RELEASE to the firmware.  This adminq call is required per
the HAS document.  The Device then sends an indication to the BMC that the
PF driver is present. This is done using Host NC Driver Status Indication
in NC-SI Get Link command or via the Host Network Controller Driver Status
Change AEN.

What the BMC may do with this information is implementation-dependent, but
this is a standard NC-SI 1.1 command we honor per the HAS.

CC: Bruce Allan <bruce.w.allan@intel.com>
CC: Jesse Brandeburg <jesse.brandeburg@intel.com>
CC: Alek Loktionov <aleksandr.loktionov@intel.com>
CC: Kevin Liedtke <kevin.d.liedtke@intel.com>
CC: Aaron Rowden <aaron.f.rowden@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Co-developed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>

A customer was chain-booting to provision his systems and one of the
steps was setting MFS. MFS isn't cleared by normal warm reboots
(clearing requires a GLOBR) and there was no indication of why Jumbo
Frame receives were failing.

Add a warning if MFS is set to anything lower than the default.
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Detect and log information about pre-recovery mode when firmware
transitions to a recovery mode.
When a firmware transitions to a recovery mode it stores a number
of unexpected EMP resets in one of its registers. The number of EMP
resets ranging from 0x21 to 0x2A indicates that FW transitions
to recovery mode. Use these values to emit log entry about transition
process. Previously the pre-recovery mode may not have been detected
and there was no log entry when NIC was in pre-recovery mode.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Use jiffies to limit max waiting time for PF reset to succeed.
Previous wait loop was unreliable. It required unreasonably long time
to wait for PF reset after reboot when NIC was about to enter
recovery mode
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Remove all the unused defines as they are just dead weight.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Move i40e_client.h to include/linux/net/intel/*
since its shared between i40iw and i40e.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Minor overlapping changes in xfrm_device.c, between the double
ESP trailing bug fix setting the XFRM_INIT flag and the changes
in net-next preparing for bonding encryption support.
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) Don't insert ESP trailer twice in IPSEC code, from Huy Nguyen.

 2) The default crypto algorithm selection in Kconfig for IPSEC is out
    of touch with modern reality, fix this up. From Eric Biggers.

 3) bpftool is missing an entry for BPF_MAP_TYPE_RINGBUF, from Andrii
    Nakryiko.

 4) Missing init of ->frame_sz in xdp_convert_zc_to_xdp_frame(), from
    Hangbin Liu.

 5) Adjust packet alignment handling in ax88179_178a driver to match
    what the hardware actually does. From Jeremy Kerr.

 6) register_netdevice can leak in the case one of the notifiers fail,
    from Yang Yingliang.

 7) Use after free in ip_tunnel_lookup(), from Taehee Yoo.

 8) VLAN checks in sja1105 DSA driver need adjustments, from Vladimir
    Oltean.

 9) tg3 driver can sleep forever when we get enough EEH errors, fix from
    David Christensen.

10) Missing {READ,WRITE}_ONCE() annotations in various Intel ethernet
    drivers, from Ciara Loftus.

11) Fix scanning loop break condition in of_mdiobus_register(), from
    Florian Fainelli.

12) MTU limit is incorrect in ibmveth driver, from Thomas Falcon.

13) Endianness fix in mlxsw, from Ido Schimmel.

14) Use after free in smsc95xx usbnet driver, from Tuomas Tynkkynen.

15) Missing bridge mrp configuration validation, from Horatiu Vultur.

16) Fix circular netns references in wireguard, from Jason A. Donenfeld.

17) PTP initialization on recovery is not done properly in qed driver,
    from Alexander Lobakin.

18) Endian conversion of L4 ports in filters of cxgb4 driver is wrong,
    from Rahul Lakkireddy.

19) Don't clear bound device TX queue of socket prematurely otherwise we
    get problems with ktls hw offloading, from Tariq Toukan.

20) ipset can do atomics on unaligned memory, fix from Russell King.

21) Align ethernet addresses properly in bridging code, from Thomas
    Martitz.

22) Don't advertise ipv4 addresses on SCTP sockets having ipv6only set,
    from Marcelo Ricardo Leitner.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (149 commits)
  rds: transport module should be auto loaded when transport is set
  sch_cake: fix a few style nits
  sch_cake: don't call diffserv parsing code when it is not needed
  sch_cake: don't try to reallocate or unshare skb unconditionally
  ethtool: fix error handling in linkstate_prepare_data()
  wil6210: account for napi_gro_receive never returning GRO_DROP
  hns: do not cast return value of napi_gro_receive to null
  socionext: account for napi_gro_receive never returning GRO_DROP
  wireguard: receive: account for napi_gro_receive never returning GRO_DROP
  vxlan: fix last fdb index during dump of fdb with nhid
  sctp: Don't advertise IPv4 addresses if ipv6only is set on the socket
  tc-testing: avoid action cookies with odd length.
  bpf: tcp: bpf_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT
  tcp_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT
  net: dsa: sja1105: fix tc-gate schedule with single element
  net: dsa: sja1105: recalculate gating subschedule after deleting tc-gate rules
  net: dsa: sja1105: unconditionally free old gating config
  net: dsa: sja1105: move sja1105_compose_gating_subschedule at the top
  net: macb: free resources on failure path of at91ether_open()
  net: macb: call pm_runtime_put_sync on failure path
  ...

Change tin mapping on diffserv3, 4 & 8 for LE PHB support, in essence
making LE a member of the Bulk tin.

Bulk has the least priority and minimum of 1/16th total bandwidth in the
face of higher priority traffic.

NB: Diffserv 3 & 4 swap tin 0 & 1 priorities from the default order as
found in diffserv8, in case anyone is wondering why it looks a bit odd.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
[ reword commit message slightly ]
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This enhancement auto loads transport module when the transport
is set via SO_RDS_TRANSPORT socket option.
Reviewed-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com>
Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Rao Shoaib <rao.shoaib@oracle.com>
Signed-off-by: Somasundaram Krishnasamy <somasundaram.krishnasamy@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Toke Høiland-Jørgensen says:

====================
sched: A couple of fixes for sch_cake

This series contains a couple of fixes for diffserv handling in sch_cake that
provide a nice speedup (with a somewhat pedantic nit fix tacked on to the end).

Not quite sure about whether this should go to stable; it does provide a nice
speedup, but it's not strictly a fix in the "correctness" sense. I lean towards
including this in stable as well, since our most important consumer of that
(OpenWrt) is likely to backport the series anyway.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

I spotted a few nits when comparing the in-tree version of sch_cake with
the out-of-tree one: A redundant error variable declaration shadowing an
outer declaration, and an indentation alignment issue. Fix both of these.

Fixes: 046f6fd5 ("sched: Add Common Applications Kept Enhanced (cake) qdisc")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As a further optimisation of the diffserv parsing codepath, we can skip it
entirely if CAKE is configured to neither use diffserv-based
classification, nor to zero out the diffserv bits.

Fixes: c87b4ecd ("sch_cake: Make sure we can write the IP header before changing DSCP bits")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cake_handle_diffserv() tries to linearize mac and network header parts of
skb and to make it writable unconditionally. In some cases it leads to full
skb reallocation, which reduces throughput and increases CPU load. Some
measurements of IPv4 forward + NAPT on MIPS router with 580 MHz single-core
CPU was conducted. It appears that on kernel 4.9 skb_try_make_writable()
reallocates skb, if skb was allocated in ethernet driver via so-called
'build skb' method from page cache (it was discovered by strange increase
of kmalloc-2048 slab at first).

Obtain DSCP value via read-only skb_header_pointer() call, and leave
linearization only for DSCP bleaching or ECN CE setting. And, as an
additional optimisation, skip diffserv parsing entirely if it is not needed
by the current configuration.

Fixes: c87b4ecd ("sch_cake: Make sure we can write the IP header before changing DSCP bits")
Signed-off-by: Ilya Ponetayev <i.ponetaev@ndmsystems.com>
[ fix a few style issues, reflow commit message ]
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Antoine Tenart says:

====================
net: phy: mscc: multiple improvements

This series contains various improvements to the MSCC PHY driver, fixing
sparse and smatch warnings, using functions provided by the PHY core,
and improving the driver consistency and maintenance.

I don't think any of those improvements and fixes is worth backporting
to stable trees.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

All PHY read and write return values are checked for errors in
vsc8514_config_init and vsc8584_config_init, except for one. Fix this.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the middle of vsc8584_config_init and vsc8514_config_init, the page
is set to 'standard'. This is the default value, and the page isn't set
to another value before. Those pages configuration can be safely
removed.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the vsc8584_config_init and vsc8514_config_init, the base page is set
to 'GPIO', configuration is done, and the page is never explicitly
restored to the standard page. No bug was triggered as it turns out
helpers called in those config_init functions do modify the base page,
and set it back to standard. But that is dangerous and any modification
to those functions would introduce bugs. This patch fixes this, to
improve maintenance, by restoring the base page to 'standard' once
'GPIO' accesses are completed.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch improves the MSCC driver by using the provided
phy_lock_mdio_bus and phy_unlock_mdio_bus helpers instead of locking and
unlocking the MDIO bus lock directly. The patch is only cosmetic but
should improve maintenance and consistency.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes a typo in a comment, s/Ths/This/. The patch is cosmetic
only.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>