- 21 Aug, 2019 35 commits
-
-
YueHaibing authored
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
YueHaibing authored
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by:
-
YueHaibing authored
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
-
YueHaibing authored
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'mac80211-next-for-davem-2019-08-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg: ==================== Here are a few groups of changes: * EDMG channel support (60 GHz, just a single patch) * initial 6/7 GHz band support (Arend) * association timestamp recording (Ben) * rate control improvements for better performance with the mt76 driver (Felix) * various fixes for previous HE support changes (John) ==================== Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Add devlink-trap support This patchset adds devlink-trap support in mlxsw. Patches #1-#4 add the necessary APIs and defines in mlxsw. Patch #5 implements devlink-trap support for layer 2 drops. More drops will be added in the future. Patches #6-#7 add selftests to make sure that all the new code paths are exercised and that the feature is working as expected. ==================== Signed-off-by: -
Ido Schimmel authored
Test generic devlink-trap functionality over mlxsw. These tests are not specific to a single trap, but do not check the devlink-trap common infrastructure either. Currently, the only test case is device deletion (by reloading the driver) while packets are being trapped. Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
Test that each supported packet trap is triggered under the right conditions and that packets are indeed dropped and not forwarded. Signed-off-by:
-
Ido Schimmel authored
Register supported packet traps (layer 2 drops only, currently) and associated trap group with devlink during driver initialization. The amount of traffic generated by these packet drop traps is capped at 10Kpps to ensure the CPU is not overwhelmed by incoming packets. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
Discard trap groups are defined in a different enum so that they could all share the same policer ID: MLXSW_REG_HTGT_TRAP_GROUP_MAX + 1. Signed-off-by:
-
Ido Schimmel authored
Add the trap IDs used to report layer 2 drops. Signed-off-by:
-
Ido Schimmel authored
Subsequent patches will add discard traps support in mlxsw. The driver cannot configure such traps with a normal trap action, but needs to use exception trap action, which also increments an error counter. On the other hand, when these traps are initialized or set to drop action, they should use the default drop action set by the firmware. This guarantees that when the feature is disabled we get the exact same behavior as before the feature was introduced. Signed-off-by:
-
Ido Schimmel authored
Up until now the action of a trap was never changed during its lifetime. This is going to change by subsequent patches that will allow devlink to control the action of certain traps. Signed-off-by:
-
Felix Fietkau authored
On some devices that only support static rate fallback tables sending rate control probing packets can be really expensive. Probing lower rates can already hurt throughput quite a bit. What hurts even more is the fact that on mt76x0/mt76x2, single probing packets can only be forced by directing packets at a different internal hardware queue, which causes some heavy reordering and extra latency. The reordering issue is mainly problematic while pushing lots of packets to a particular station. If there is little activity, the overhead of probing is neglegible. The static fallback behavior is designed to pretty much only handle rate control algorithms that use only a very limited set of rates on which the algorithm switches up/down based on packet error rate. In order to better support that kind of hardware, this patch implements a different approach to rate probing where it switches to a slightly higher rate, waits for tx status feedback, then updates the stats and switches back to the new max throughput rate. This only triggers above a packet rate of 100 per stats interval (~50ms). For that kind of probing, the code has to reduce the set of probing rates a lot more compared to single packet probing, so it uses only one packet per MCS group which is either slightly faster, or as close as possible to the max throughput rate. This allows switching between similar rates with different numbers of streams. The algorithm assumes that the hardware will work its way lower within an MCS group in case of retransmissions, so that lower rates don't have to be probed by the high packets per second rate probing code. To further reduce the search space, it also does not probe rates with lower channel bandwidth than the max throughput rate. At the moment, these changes will only affect mt76x0/mt76x2. Signed-off-by:
Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20190820095449.45255-4-nbd@nbd.nameSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Felix Fietkau authored
Use the first supported rate instead of 0 (which can be invalid) Signed-off-by:
-
Felix Fietkau authored
On hardware with static fallback tables (e.g. mt76x2), rate probing attempts can be very expensive. On such devices, avoid sampling rates slower than the per-group max throughput rate, based on the assumption that the fallback table will take care of probing lower rates within that group if the higher rates fail. To further reduce unnecessary probing attempts, skip duplicate attempts on rates slower than the max throughput rate. Signed-off-by:
-
Felix Fietkau authored
The group number needs to be multiplied by the number of rates per group to get the full rate index Fixes: 5935839a ("mac80211: improve minstrel_ht rate sorting by throughput & probability") Signed-off-by:
-
Alexei Avshalom Lazar authored
802.11ay specification defines Enhanced Directional Multi-Gigabit (EDMG) STA and AP which allow channel bonding of 2 channels and more. Introduce new NL attributes that are needed for enabling and configuring EDMG support. Two new attributes are used by kernel to publish driver's EDMG capabilities to the userspace: NL80211_BAND_ATTR_EDMG_CHANNELS - bitmap field that indicates the 2.16 GHz channel(s) that are supported by the driver. When this attribute is not set it means driver does not support EDMG. NL80211_BAND_ATTR_EDMG_BW_CONFIG - represent the channel bandwidth configurations supported by the driver. Additional two new attributes are used by the userspace for connect command and for AP configuration: NL80211_ATTR_WIPHY_EDMG_CHANNELS NL80211_ATTR_WIPHY_EDMG_BW_CONFIG New rate info flag - RATE_INFO_FLAGS_EDMG, can be reported from driver and used for bitrate calculation that will take into account EDMG according to the 802.11ay specification. Signed-off-by:
Alexei Avshalom Lazar <ailizaro@codeaurora.org> Link: https://lore.kernel.org/r/1566138918-3823-2-git-send-email-ailizaro@codeaurora.orgSigned-off-by:
-
John Crispin authored
he_spr_ie_elem is dereferenced before the NULL check. fix this by moving the assignment after the check. fixes commit 697f6c50 ("mac80211: propagate HE operation info into bss_conf") This was reported by the static code checker. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20190813070712.25509-1-john@phrozen.orgSigned-off-by:
-
Ben Greear authored
Report timestamp for when sta becomes associated. Signed-off-by:
Ben Greear <greearb@candelatech.com> Link: https://lore.kernel.org/r/20190809180001.26393-2-greearb@candelatech.com [fix ktime_get_boot_ns() to ktime_get_boottime_ns(), assoc_at type to u64] Signed-off-by:
-
Ben Greear authored
Report timestamp of when sta became associated. This is the boottime clock, units are nano-seconds. Signed-off-by:
-
Arend van Spriel authored
For the new 6GHz band the same rules apply for mandatory rates so add it to set_mandatory_flags_band() function. Reviewed-by:
Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by:
Leon Zegers <leon.zegers@broadcom.com> Signed-off-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/1564745465-21234-9-git-send-email-arend.vanspriel@broadcom.comSigned-off-by:
-
Arend van Spriel authored
The default mandatory rates, ie. when not specified by user-space, is determined by the band. Select 11a rateset for 6GHz band. Reviewed-by:
-
Arend van Spriel authored
The function cfg80211_ir_permissive_chan() is applicable for 6GHz band as well so make sure it is handled. Reviewed-by:
-
Arend van Spriel authored
In nl80211.c there is a policy for all bands in NUM_NL80211_BANDS and in trace.h there is a callback trace for multicast rates which is per band in NUM_NL80211_BANDS. Both need to be extended for the new NL80211_BAND_6GHZ. Reviewed-by:
-
Arend van Spriel authored
Add 6GHz operating class range as defined in 802.11ax D4.1 Annex E. Reviewed-by:
-
Arend van Spriel authored
Extend the functions ieee80211_channel_to_frequency() and ieee80211_frequency_to_channel() to support 6GHz band according specification in 802.11ax D4.1 27.3.22.2. Reviewed-by:
-
Arend van Spriel authored
For the new 6GHz there are new UNII band definitions as listed in the FCC notice [1]. [1] https://docs.fcc.gov/public/attachments/FCC-18-147A1_Rcd.pdfReviewed-by:
-
Arend van Spriel authored
In the 802.11ax specification a new band is introduced, which is also proposed by FCC for unlicensed use. This band is referred to as 6GHz spanning frequency range from 5925 to 7125 MHz. Reviewed-by:
-
John Crispin authored
The code generating the Tx Radiotap header when using tx_status_ext was missing a field increment after setting the VHT bandwidth. Fixes: 3d07ffca ("mac80211: add struct ieee80211_tx_status support to ieee80211_add_tx_radiotap_header") Signed-off-by:
-
John Crispin authored
When reporting 80MHz, we need to set 4 and not 2 inside the corresponding field inside the Tx Radiotap header. Fixes: 3d07ffca ("mac80211: add struct ieee80211_tx_status support to ieee80211_add_tx_radiotap_header") Signed-off-by:
-
John Crispin authored
When reporting legacy rates inside the TX Radiotap header we need to split the check between "uses tx_statua_ext" and "is legacy rate". Not doing so would make the code drop into the !tx_status_ext path. Fixes: 3d07ffca ("mac80211: add struct ieee80211_tx_status support to ieee80211_add_tx_radiotap_header") Signed-off-by:
-
John Crispin authored
The RX Radiotap header length was not calculated properly when reporting legacy rates using tx_status_ext. Fixes: 3d07ffca ("mac80211: add struct ieee80211_tx_status support to ieee80211_add_tx_radiotap_header") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5-updates-2019-08-15 This patchset introduces changes in mlx5 devlink health reporters. The highlight of these changes is adding a new reporter: RX reporter mlx5 RX reporter: reports and recovers from timeouts and RX completion error. 1) Perform TX reporter cleanup. In order to maintain the code flow as similar as possible between RX and TX reporters, start the set with cleanup. 2) Prepare for code sharing, generalize and move shared functionality. 3) Refactor and extend TX reporter diagnostics information to align the TX reporter diagnostics output with the RX reporter's diagnostics output. 4) Add helper functions Patch 11: Add RX reporter, initially supports only the diagnostics call back. 5) Change ICOSQ (Internal Operations Send Queue) open/close flow to avoid race between interface down and completion error recovery. 6) Introduce recovery flows for RX ring population timeout on ICOSQ, and for completion errors on ICOSQ and on RQ (Regular receive queues). 7) Include RX reporters in mlx5 documentation. 8) Last two patches of this series, are trivial fixes for previously submitted patches on this release cycle. ==================== Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2019-08-20 This series contains updates to ice driver only. Brett fixes the detection of a hung transmit ring by checking the software based tail (next_to_use) to determine if there is pending work. Updates the driver to assume that using more than one receive queue per receive ring container is a rare case, so use unlikely() in the case were we actually need to divide our budget for multiple queues. Fixed an issue where the write back on ITR bit was not being set when interrupts are disabled, which was causing only write backs when polling only when a cache line is filled. Cleans up unnecessary wait times during VF bring up and reset paths. Increased the mailbox size for receive queues that are used to communicate with VFs to accommodate the large number of VFs that the driver can support. Akeem restructures the initialization flows for VFs, including how VFs are configured and resources allocated to improve flows so that when we clean up resources, we do not try to free resources that were never allocated. Organizes code to ensure that VF specific code is located in the SR-IOV specific file. Paul fixes an issue when setting the pause parameter which was incorrectly blocking users from changing receive or transmit pause settings. Ensure register access for MSIX vector index is only done in the PF space and not absolute device space. Usha fixes a potential kernel hang in the DCB rebuild path when in CEE mode, where the ETS recommended DCB configuration is not being set or set correctly. Mitch updates the driver to process all receive descriptors, regardless of the size of the associated data. Tony fixes and issue during the reset/rebuild path of a PF VSI where we were assuming that the PF VSI was always to be enabled, which can attempt to bring up a PF VSI on a downed interface which can lead to various crashes. Pawel fixes up variable definitions to match the type of data being stored. v2: Dropped patch 1 of the series to add ethtool support to query/add channels on a VSI, while we re-qork the functionality to match the ethtool expected behavior to report combined (Tx and Rx) numbers. v3: Updated patch 4 to use kzalloc() and kfree() instead devm_kzalloc() and devm_kfree(). ==================== Signed-off-by:
-
- 20 Aug, 2019 5 commits
-
-
Brett Creeley authored
When we fail to add/delete MAC filters in the VF, the print doesn't distinguish between the two. Fix that by printing whether or not we failed to add/delete the MAC filter respectively. Signed-off-by:
Brett Creeley <brett.creeley@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Pawel Kaminski authored
These queue variables are being assigned values that are type u16. Change the local variables to match these types. Since these represent queue counts, they should never be negative. Signed-off-by:
Pawel Kaminski <pawel.kaminski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by:
-
Akeem G Abodunrin authored
In order to use some of the VF resources definition in the SR-IOV specific virtchnl header file, this patch moves applicable code to ice_virtchnl_pf.h file accordingly... and they should have been defined in the destination file originally. Signed-off-by:
Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by:
-
Brett Creeley authored
Currently we use the ICE_MBXQ_LEN for both the Mailbox send and receive queues that are used to communicate with VFs. This is fine for the send queue because the PF driver will lock the queue for every single send, but for the Mailbox receive queue every VF is posting to its Mailbox send queue and the hardware is then handing the message to the PF on its Mailbox receive queue. This becomes a problem with many VFs because it seems to overburden the Mailbox receive queue on the PF. Fix this by increasing the Mailbox receive queue for the PF to 512 entries. The number 512 was determined based on the number of VFs supported by the device. We can have a total of 256 VFs so in the worst case this allows the VFs to put 2 messages in the PFs Mailbox receive queue at the same time. Signed-off-by:
-
Brett Creeley authored
Currently there are a couple places where the VF is waiting too long when checking the status of registers. This is causing the AVF driver to spin for longer than necessary in the __IAVF_STARTUP state. Sometimes it causes the AVF to go into the __IAVF_COMM_FAILED, which may retrigger the __IAVF_STARTUP state. Try to reduce the chance of this happening by removing unnecessary wait times in VF bringup/resets. Signed-off-by:
-
