All the other BF54x parts had these defines renamed to avoid collision,
but it looks the BF542 was missed somehow.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

The cache lock code was unused and punted, so punt the documentation too.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

We don't need the BKL and now people will stop looking at this.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

The DMA channel status field was encoding redundant info wrt the DMA MMR
config register, and it was doing an incomplete job of checking all DMA
channels (some drivers write directly to the config register).  So drop
the tristate field in favor of a binary atomic field.  This simplifies
the code in general, removes the implicit need for sleeping, and forces
the suspend code to handle all channels properly.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

The driver was moved during the merge process, so update the defines to
match the new location.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Avoid including unnecessary headers all the time as well as circular
includes with core requirements.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

All the arches define a helper macro to make things easy for driver code.
Reported-by: Frank Van Hooft <frank@frankvh.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

The GPIOs on ports C/D/E on the BF538/BF539 do not behave the same way as
the other ports on the part and the same way as all other Blackfin parts.
The MMRs are programmed slightly different and they cannot be used to
generate interrupts or wakeup a sleeping system.  Since these guys don't
fit into the existing code, create a simple gpiolib driver for them.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Have the C API trace funcs match the assembly API trace funcs.
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

PLL_LOCKCNT applies only to the PLL programming sequence which does not
apply to core and system clock dividers.  Writes to PLL_DIV to change the
CSEL/SSEL dividers take effect immediately.

There is still overhead in software in writing the new dividers, so just
use a value of 50us as this should be good enough.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Drop the CONFIG_USB_ISP1362_BFIN_GPIO_IRQ Kconfig as it never made it into
mainline and it was a bad interface into the board resources.  For boards
that actually used this, replace it with an actual IRQ define.  For boards
that didn't, simply drop the resources.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Since the link sizes never change at runtime, push the calculation out to
the linker script to save some useless calculation costs.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

The access_ok() function did not accept ranges within the async banks
which made it impossible to do XIP in flash.  Fixing that also showed
that the current bfin_mem_access_type() code did not work with accesses
that spanned async banks (like a file system).  So split out and fix the
async bank checks so that all these scenarios work as expected.
Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Rather than using our own data structures that basically boil down to a
bitmap, use the standard bitmap functions.
Reported-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Now that the driver has been updated, convert the board resources to the
new i2c framework for managing slaves.

For boards that don't actually hook up to this hardware, simply drop the
resources altogether.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

The requested peripheral is turned into an index into some state arrays,
so make sure the calculated index doesn't exceed the index.  This occurs
when using bogus pin values or the define headers are screwed up.  Now
we'll notice right away that something needs fixing instead of trying to
track down random memory corruption.
Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

No point in redefining things that common code already does for us.  Also
use CYC2NS_SCALE_FACTOR to better reflect reality and for better precision.
Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Currently sched_clock() is only defined when using CYCLES as a clock
source.  Declare sched_clock() in common code and mark it with notrace to
prevent invoking sched_clock() recursively (because ftrace uses
sched_clock() to record time).
Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Some of the clocksource prototypes were updated, but the gptimer0 func was
missed in the process.  Not a big issue as the argument is ignored, but we
should fix the compile warning anyways.
Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

The Blackfin port only implemented an optimized version of the
csum_tcpudp_nofold function, so convert everything else to the new
generic code.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6:
  udf: Avoid IO in udf_clear_inode
  udf: Try harder when looking for VAT inode
  udf: Fix compilation with UDFFS_DEBUG enabled

It is not very good to do IO in udf_clear_inode. First, VFS does not really
expect inode to become dirty there and thus we have to write it ourselves,
second, memory reclaim gets blocked waiting for IO when it does not really
expect it, third, the IO pattern (e.g. on umount) resulting from writes in
udf_clear_inode is bad and it slows down writing a lot.

The reason why UDF needed to do IO in udf_clear_inode is that UDF standard
mandates extent length to exactly match inode size. But when we allocate
extents to a file or directory, we don't really know what exactly the final
file size will be and thus temporarily set it to block boundary and later
truncate it to exact length in udf_clear_inode. Now, this is changed to
truncate to final file size in udf_release_file for regular files. For
directories and symlinks, we do the truncation at the moment when learn
what the final file size will be.
Signed-off-by: Jan Kara <jack@suse.cz>

Some disks do not contain VAT inode in the last recorded block as required
by the standard but a few blocks earlier (or the number of recorded blocks
is wrong). So look for the VAT inode a bit before the end of the media.
Signed-off-by: Jan Kara <jack@suse.cz>

Signed-off-by: Jan Kara <jack@suse.cz>

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, mce: Clean up thermal init by introducing intel_thermal_supported()
  x86, mce: Thermal monitoring depends on APIC being enabled
  x86: Gart: fix breakage due to IOMMU initialization cleanup
  x86: Move swiotlb initialization before dma32_free_bootmem
  x86: Fix build warning in arch/x86/mm/mmio-mod.c
  x86: Remove usedac in feature-removal-schedule.txt
  x86: Fix duplicated UV BAU interrupt vector
  nvram: Fix write beyond end condition; prove to gcc copy is safe
  mm: Adjust do_pages_stat() so gcc can see copy_from_user() is safe
  x86: Limit the number of processor bootup messages
  x86: Remove enabling x2apic message for every CPU
  doc: Add documentation for bootloader_{type,version}
  x86, msr: Add support for non-contiguous cpumasks
  x86: Use find_e820() instead of hard coded trampoline address
  x86, AMD: Fix stale cpuid4_info shared_map data in shared_cpu_map cpumasks

Trivial percpu-naming-introduced conflicts in arch/x86/kernel/cpu/intel_cacheinfo.c

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  pcmcia: CodingStyle fixes
  pcmcia: remove unused IRQ_FIRST_SHARED

* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: (23 commits)
  spi: fix probe/remove section markings
  Add OMAP spi100k driver
  spi-imx: don't access struct device directly but use dev_get_platdata
  spi-imx: Add mx25 support
  spi-imx: use positive logic to distinguish cpu variants
  spi-imx: correct check for platform_get_irq failing
  ARM: NUC900: Add spi driver support for nuc900
  spi: SuperH MSIOF SPI Master driver V2
  spi: fix spidev compilation failure when VERBOSE is defined
  spi/au1550_spi: fix setupxfer not to override cfg with zeros
  spi/mpc8xxx: don't use __exit_p to wrap plat_mpc8xxx_spi_remove
  spi/i.MX: fix broken error handling for gpio_request
  spi/i.mx: drain MXC SPI transfer buffer when probing device
  MAINTAINERS: add SPI co-maintainer.
  spi/xilinx_spi: fix incorrect casting
  spi/mpc52xx-spi: minor cleanups
  xilinx_spi: add a platform driver using the xilinx_spi common module.
  xilinx_spi: add support for the DS570 IP.
  xilinx_spi: Switch to iomem functions and support little endian.
  xilinx_spi: Split into of driver and generic part.
  ...

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf sched: Fix build failure on sparc
  perf bench: Add "all" pseudo subsystem and "all" pseudo suite
  perf tools: Introduce perf_session class
  perf symbols: Ditch dso->find_symbol
  perf symbols: Allow lookups by symbol name too
  perf symbols: Add missing "Variables" entry to map_type__name
  perf symbols: Add support for 'variable' symtabs
  perf symbols: Introduce ELF counterparts to symbol_type__is_a
  perf symbols: Introduce symbol_type__is_a
  perf symbols: Rename kthreads to kmaps, using another abstraction for it
  perf tools: Allow building for ARM
  hw-breakpoints: Handle bad modify_user_hw_breakpoint off-case return value
  perf tools: Allow cross compiling
  tracing, slab: Fix no callsite ifndef CONFIG_KMEMTRACE
  tracing, slab: Define kmem_cache_alloc_notrace ifdef CONFIG_TRACING

Trivial conflict due to different fixes to modify_user_hw_breakpoint()
in include/linux/hw_breakpoint.h

Global variable declarations must match the definitions in section attributes
as the compiler is at liberty to vary the method it uses to access a variable,
depending on the section it is in.

When building the FRV arch, I now see:

  drivers/built-in.o: In function `pci_apply_final_quirks':
  drivers/pci/quirks.c:2606: relocation truncated to fit: R_FRV_GPREL12 against symbol `pci_dfl_cache_line_size' defined in .devinit.data section in drivers/built-in.o
  drivers/pci/quirks.c:2623: relocation truncated to fit: R_FRV_GPREL12 against symbol `pci_dfl_cache_line_size' defined in .devinit.data section in drivers/built-in.o
  drivers/pci/quirks.c:2630: relocation truncated to fit: R_FRV_GPREL12 against symbol `pci_dfl_cache_line_size' defined in .devinit.data section in drivers/built-in.o

because the declaration of pci_dfl_cache_line_size in linux/pci.h does not
match the definition in drivers/pci/pci.c.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If there is no hardware breakpoint support, modify_user_hw_breakpoint()
tries to return a NULL pointer through as an 'int' return value:

  In file included from kernel/exit.c:53:
  include/linux/hw_breakpoint.h: In function 'modify_user_hw_breakpoint':
  include/linux/hw_breakpoint.h:96: warning: return makes integer from pointer without a cast

Return 0 instead.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (46 commits)
  microblaze: Remove rt_sigsuspend wrapper
  microblaze: nommu: Don't clobber R11 on syscalls
  microblaze: Remove show_tmem function
  microblaze: Support for WB cache
  microblaze: Add PVR for Microblaze v7.30.a
  microblaze: Remove ancient and fake microblaze version from cpu_ver table
  microblaze: Remove panic_timeout init value
  microblaze: Do not count system calls in default
  microblaze: Enable DTC compilation
  microblaze: Core oprofile configs and hooks
  microblaze: Fix level interrupt ACKing
  microblaze: Enable futimesat syscall
  microblaze: Checking DTS against PVR for write-back cache
  microblaze: Remove duplicity from pgalloc.h
  microblaze: Futex support
  microblaze: Adding dev_arch_data functions
  microblaze: Fix the heartbeat gpio to be more robust
  microblaze: Simple __copy_tofrom_user for noMMU
  microblaze: Export memory_start for modules
  microblaze: Use lowest-common-denominator default CPU settings
  ...

* 'for-linus' of git://neil.brown.name/md: (27 commits)
  md: add 'recovery_start' per-device sysfs attribute
  md: rcu_read_lock() walk of mddev->disks in md_do_sync()
  md: integrate spares into array at earliest opportunity.
  md: move compat_ioctl handling into md.c
  md: revise Kconfig help for MD_MULTIPATH
  md: add MODULE_DESCRIPTION for all md related modules.
  raid: improve MD/raid10 handling of correctable read errors.
  md/raid10: print more useful messages on device failure.
  md/bitmap: update dirty flag when bitmap bits are explicitly set.
  md: Support write-intent bitmaps with externally managed metadata.
  md/bitmap: move setting of daemon_lastrun out of bitmap_read_sb
  md: support updating bitmap parameters via sysfs.
  md: factor out parsing of fixed-point numbers
  md: support bitmap offset appropriate for external-metadata arrays.
  md: remove needless setting of thread->timeout in raid10_quiesce
  md: change daemon_sleep to be in 'jiffies' rather than 'seconds'.
  md: move offset, daemon_sleep and chunksize out of bitmap structure
  md: collect bitmap-specific fields into one structure.
  md/raid1: add takeover support for raid5->raid1
  md: add honouring of suspend_{lo,hi} to raid1.
  ...

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (58 commits)
  mfd: Add twl6030 regulator subdevices
  regulator: Add support for twl6030 regulators
  rtc: Add twl6030 RTC support
  mfd: Add support for twl6030 irq framework
  mfd: Rename twl4030_ routines in twl-regulator.c
  mfd: Rename twl4030_ routines in rtc-twl.c
  mfd: Rename all twl4030_i2c*
  mfd: Rename twl4030* driver files to enable re-use
  mfd: Clarify twl4030 return value for read and write
  mfd: Add all twl4030 regulators to the twl4030 mfd driver
  mfd: Don't set mc13783 ADREFMODE for touch conversions
  mfd: Remove ezx-pcap defines for custom led gpio encoding
  mfd: Near complete mc13783 rewrite
  mfd: Remove build time warning for WM835x register default tables
  mfd: Force I2C to be built in when building WM831x
  mfd: Don't allow wm831x to be built as a module
  mfd: Fix incorrect error check for wm8350-core
  mfd: Fix twl4030 warning
  gpiolib: Implement gpio_to_irq() for wm831x
  mfd: Remove default selection of AB4500
  ...

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: fix lh7a40x build
  ARM: fix sa1100 build
  ARM: fix clps711x, footbridge, integrator, ixp2000, ixp2300 and s3c build bug
  ARM: VFP: fix vfp thread init bug and document vfp notifier entry conditions
  ARM: pxa: fix now incorrect reference of skt->irq by using skt->socket.pci_irq
  [ARM] pxa/zeus: default configuration for Arcom Zeus SBC.
  [ARM] pxa/zeus: make Viper pcmcia support more generic to support Zeus
  [ARM] pxa/zeus: basic support for Arcom Zeus SBC
  [ARM] pxa/em-x270: fix usb hub power up/reset sequence
  PCMCIA: fix pxa2xx_lubbock modular build error
  ARM: RealView: Fix typo in the RealView/PBX Kconfig entry
  ARM: Do not allow the probing of the local timer
  ARM: Add an earlyprintk debug console

* git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (75 commits)
  NFS: Fix nfs_migrate_page()
  rpc: remove unneeded function parameter in gss_add_msg()
  nfs41: Invoke RECLAIM_COMPLETE on all new client ids
  SUNRPC: IS_ERR/PTR_ERR confusion
  NFSv41: Fix a potential state leakage when restarting nfs4_close_prepare
  nfs41: Handle NFSv4.1 session errors in the delegation recall code
  nfs41: Retry delegation return if it failed with session error
  nfs41: Handle session errors during delegation return
  nfs41: Mark stateids in need of reclaim if state manager gets stale clientid
  NFS: Fix up the declaration of nfs4_restart_rpc when NFSv4 not configured
  nfs41: Don't clear DRAINING flag on NFS4ERR_STALE_CLIENTID
  nfs41: nfs41_setup_state_renewal
  NFSv41: More cleanups
  NFSv41: Fix up some bugs in the NFS4CLNT_SESSION_DRAINING code
  NFSv41: Clean up slot table management
  NFSv41: Fix nfs4_proc_create_session
  nfs41: Invoke RECLAIM_COMPLETE
  nfs41: RECLAIM_COMPLETE functionality
  nfs41: RECLAIM_COMPLETE XDR functionality
  Cleanup some NFSv4 XDR decode comments
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (34 commits)
  m68k: rename global variable vmalloc_end to m68k_vmalloc_end
  percpu: add missing per_cpu_ptr_to_phys() definition for UP
  percpu: Fix kdump failure if booted with percpu_alloc=page
  percpu: make misc percpu symbols unique
  percpu: make percpu symbols in ia64 unique
  percpu: make percpu symbols in powerpc unique
  percpu: make percpu symbols in x86 unique
  percpu: make percpu symbols in xen unique
  percpu: make percpu symbols in cpufreq unique
  percpu: make percpu symbols in oprofile unique
  percpu: make percpu symbols in tracer unique
  percpu: make percpu symbols under kernel/ and mm/ unique
  percpu: remove some sparse warnings
  percpu: make alloc_percpu() handle array types
  vmalloc: fix use of non-existent percpu variable in put_cpu_var()
  this_cpu: Use this_cpu_xx in trace_functions_graph.c
  this_cpu: Use this_cpu_xx for ftrace
  this_cpu: Use this_cpu_xx in nmi handling
  this_cpu: Use this_cpu operations in RCU
  this_cpu: Use this_cpu ops for VM statistics
  ...

Fix up trivial (famous last words) global per-cpu naming conflicts in
	arch/x86/kvm/svm.c
	mm/slab.c

In recent months, two different network projects erroneously
strayed down the rw_lock path.  Update the Documentation
based upon comments by Eric Dumazet and Paul E. McKenney in
those threads.

Further updates await somebody else with more expertise.

Changes:
  - Merged with extensive content by Stephen Hemminger.
  - Fix one of the comments by Linus Torvalds.

Signed-off-by: William.Allen.Simpson@gmail.com
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>