This patch converts /proc/net/bondX/info into /proc/net/bonding/bondX
using the seq_file interface.

This is based on Stephen's recent patch, but slightly modified to work
with the propagation patch set and with some locking changes to make it
simpler.

The patch applies both on 2.4 (after the sync set from earlier today)
and on 2.6 (after the propagation set from 2003/11/9).

Amir

sbni.c in 2.6.0-test5 fails to compile with gcc 3.3 with the following
error:

<--  snip  -->

...
  CC      drivers/net/wan/sbni.o
...
drivers/net/wan/sbni.c: In function `calc_crc32':
drivers/net/wan/sbni.c:1568: error: asm-specifier for variable `_crc'
conflicts with asm clobber list
make[3]: *** [drivers/net/wan/sbni.o] Error 1

<--  snip  -->

Below is the patch by Margit Schubert-White to fix this issue (it is
already in 2.4).

cu
Adrian

Rick Lindsley <ricklind@us.ibm.com> wrote:
>
> since it's been out for a while you probably already know, but the patch
> for e1000_main.c has a bug in it.  Looks like it will fail at line 1550 if
> compiled with NETIF_F_TSO defined.
>

So it will.  I blame the gcc developers.

 25-akpm/drivers/net/e1000/e1000_main.c |   13 +++++++++----
 1 files changed, 9 insertions(+), 4 deletions(-)

Redo of earlier patch to get rid of MOD_INC/DEC and use alloc_netdev.
This is against 2.6.0-test5 bk latest.

Update sealevel driver to match current net_device interface:
	- dynamically allocate netdevice and private data.
	- get rid of MOD_INC/DEC
	- if_ptr not used
	- bugfix: not all of board structure was being zeroed.

Note: this driver still doesn't probe() correctly since it just assumes that
if loaded the hardware is there!

Since I don't have one of these boards...
tested it by #ifdef'ing out all the bits that touch actual hardware.

Convert ali-ircc driver to:
	- use alloc_net_dev not dev_alloc
	- allocate private data at same time
	- cleanup error unwinds
	- call free_netdev.

Builds and loads, but don't have real hardware.

Convert via-ircc 2.6.0-test5
	- use alloc_net_dev not dev_alloc
	- allocate private data at same time
	- cleanup error unwinds
	- call free_netdev.

Builds and loads, but don't have real hardware.

Cleanup nsc-ircc driver for 2.6.0-test5
	- replace dev_alloc with alloc_netdev
	- use private data allocated with alloc_netdev
	- error unwind cleanup

Fixes for donauboe for 2.6.0-test5
	- replace dev_alloc with alloc_netdev
	- error unwind cleanup

Yet another irda driver cleanup for 2.6.0-test5
	- replace dev_alloc with alloc_netdev
	- use private data allocated with alloc_netdev
	- use free_netdev

Update irda-usb for 2.6.0-test5
	- use alloc_netdev (but can't use dev->priv area cause that is allocated elsewhere).

Subject: Re: [Kernel-janitors] [PATCH] insert missing free_irq and fix 	cleanup path
From: Leann Ogasawara <ogasawara@osdl.org>

On Thu, 2003-09-04 at 13:17, Benjamin LaHaise wrote:
> The if()s before free are redundant, turf them and it's good.

From: Leann Ogasawara <ogasawara@osdl.org>
Subject: [Kernel-janitors] [PATCH] insert missing iounmap()

Patch inserts a missing iounmap().

According to Jean the toshoboe and old smc ircc drivers are no longer needed.
This patch removes them from 2.6.0-test5

Replace busy loop nop with cpu_relax(), and just use mdelay where it's better.

From: Randy Hron <rwhron@earthlink.net>

From: Randy Hron <rwhron@earthlink.net>

From: Randy Hron <rwhron@earthlink.net>

From: Randy Hron <rwhron@earthlink.net>

From: Randy Hron <rwhron@earthlink.net>

From: Randy Hron <rwhron@earthlink.net>

From: Randy Hron <rwhron@earthlink.net>

Replace macro with inline and get some type checking.

I finally found some time to hack the depca driver, in basically the
same way I did with the de4x5 driver. The patch is quite big (shuffles
a lot of code around, removes lots of global variables), mainly in
order to use the driver model on every bus supported by this driver.

I also removed the probing from Space.c, so the usual warning about
device renumbering applies.

Tested on alpha (DE422, EISA) and i386 (two DE201, ISA), built-in and
modular. The MCA part is completly untested, since I lack the hardware
(no, I do not own every single piece of junk hardware out
there... ;-).

into laptop.osdl.org:/home/torvalds/v2.5/linux

into laptop.osdl.org:/home/torvalds/v2.5/linux

Drop support for old param struct method, and clean up code.