- 22 Sep, 2018 14 commits
-
-
Andrew Lunn authored
The previous commit to ravb had the side effect of making the PHY advertise Pause and Asym Pause, which previously did not happen. By default, phydev->supported has both forms of pause enabled, but phydev->advertising does not. The new phy_remove_link_mode() copies phydev->supported to phydev->advertising after removing the requested link mode. These Pause configuration bits appears it stops the PHY from completing Auto-Neg and the link remains down. Be explicit and remove the Pause and Asym Pause modes, so restoring the old behavior. Fixes: 41124fa6 ("net: ethernet: Add helper to remove a supported link mode") Reported-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Håkon Bugge says: ==================== net: if_arp: use define instead of hard-coded value Struct arpreq contains the name of the device. All other places in the kernel, the define IFNAMSIZ is used to designate its size. But in if_arp.h, a literal constant is used. As it could be good reasons to use constants instead of the defines in include files under uapi, it seems to be OK to use the define here, without opening a can of worms in user-land. This because if_arp.h includes netdevice.h, which also uses IFNAMSIZ. For the distros I have checked, this also holds true for the use-land side. The series also fixes some incorrect indents. ==================== Signed-off-by: -
Håkon Bugge authored
uapi/linux/if_arp.h includes linux/netdevice.h, which uses IFNAMSIZ. Hence, use it instead of hard-coded value. Signed-off-by:
Håkon Bugge <haakon.bugge@oracle.com> Signed-off-by:
-
Håkon Bugge authored
Fixing incorrect indents and align comments. Signed-off-by:
-
Vakul Garg authored
In current implementation, tls records are encrypted & transmitted serially. Till the time the previously submitted user data is encrypted, the implementation waits and on finish starts transmitting the record. This approach of encrypt-one record at a time is inefficient when asynchronous crypto accelerators are used. For each record, there are overheads of interrupts, driver softIRQ scheduling etc. Also the crypto accelerator sits idle most of time while an encrypted record's pages are handed over to tcp stack for transmission. This patch enables encryption of multiple records in parallel when an async capable crypto accelerator is present in system. This is achieved by allowing the user space application to send more data using sendmsg() even while previously issued data is being processed by crypto accelerator. This requires returning the control back to user space application after submitting encryption request to accelerator. This also means that zero-copy mode of encryption cannot be used with async accelerator as we must be done with user space application buffer before returning from sendmsg(). There can be multiple records in flight to/from the accelerator. Each of the record is represented by 'struct tls_rec'. This is used to store the memory pages for the record. After the records are encrypted, they are added in a linked list called tx_ready_list which contains encrypted tls records sorted as per tls sequence number. The records from tx_ready_list are transmitted using a newly introduced function called tls_tx_records(). The tx_ready_list is polled for any record ready to be transmitted in sendmsg(), sendpage() after initiating encryption of new tls records. This achieves parallel encryption and transmission of records when async accelerator is present. There could be situation when crypto accelerator completes encryption later than polling of tx_ready_list by sendmsg()/sendpage(). Therefore we need a deferred work context to be able to transmit records from tx_ready_list. The deferred work context gets scheduled if applications are not sending much data through the socket. If the applications issue sendmsg()/sendpage() in quick succession, then the scheduling of tx_work_handler gets cancelled as the tx_ready_list would be polled from application's context itself. This saves scheduling overhead of deferred work. The patch also brings some side benefit. We are able to get rid of the concept of CLOSED record. This is because the records once closed are either encrypted and then placed into tx_ready_list or if encryption fails, the socket error is set. This simplifies the kernel tls sendpath. However since tls_device.c is still using macros, accessory functions for CLOSED records have been retained. Signed-off-by:
Vakul Garg <vakul.garg@nxp.com> Signed-off-by:
-
YueHaibing authored
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
YueHaibing authored
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by:
-
Florian Fainelli authored
Allow the configuration of the MDIO clock divider when the Device Tree contains 'clock-frequency' property (similar to I2C and SPI buses). Because the hardware may have lost its state during suspend/resume, re-apply the MDIO clock divider upon resumption. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Nathan Chancellor authored
Clang warns when a variable is assigned to itself. drivers/net/usb/lan78xx.c:940:11: warning: explicitly assigning value of variable of type 'u32' (aka 'unsigned int') to itself [-Wself-assign] offset = offset; ~~~~~~ ^ ~~~~~~ 1 warning generated. Reorder the if statement to acheive the same result and avoid a self assignment warning. Link: https://github.com/ClangBuiltLinux/linux/issues/129Signed-off-by:Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Nathan Chancellor authored
Clang warns when a variable is assigned to itself. drivers/net/fddi/skfp/pcmplc.c:1257:6: warning: explicitly assigning value of variable of type 'int' to itself [-Wself-assign] phy = phy ; on_off = on_off ; ~~~ ^ ~~~ drivers/net/fddi/skfp/pcmplc.c:1257:21: warning: explicitly assigning value of variable of type 'int' to itself [-Wself-assign] phy = phy ; on_off = on_off ; ~~~~~~ ^ ~~~~~~ 2 warnings generated. Turns out this entire function doesn't actually do anything since SK_UNUSED is just casting the pointer to void. Remove it to silence this Clang warning. Link: https://github.com/ClangBuiltLinux/linux/issues/128Signed-off-by: -
Nathan Chancellor authored
Clang warns when a variable is assigned to itself. drivers/net/ethernet/brocade/bna/bna_enet.c:1800:9: warning: explicitly assigning value of variable of type 'int' to itself [-Wself-assign] for (i = i; i < (bna->ioceth.attr.num_ucmac * 2); i++) ~ ^ ~ drivers/net/ethernet/brocade/bna/bna_enet.c:1835:9: warning: explicitly assigning value of variable of type 'int' to itself [-Wself-assign] for (i = i; i < (bna->ioceth.attr.num_mcmac * 2); i++) ~ ^ ~ 2 warnings generated. Link: https://github.com/ClangBuiltLinux/linux/issues/110Signed-off-by: -
Nathan Chancellor authored
Clang warns when multiple pairs of parentheses are used for a single conditional statement. drivers/net/ethernet/neterion/vxge/vxge-traffic.c:2265:31: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] if ((hldev->config.intr_mode == VXGE_HW_INTR_MODE_MSIX_ONE_SHOT)) ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/neterion/vxge/vxge-traffic.c:2265:31: note: remove extraneous parentheses around the comparison to silence this warning if ((hldev->config.intr_mode == VXGE_HW_INTR_MODE_MSIX_ONE_SHOT)) ~ ^ ~ drivers/net/ethernet/neterion/vxge/vxge-traffic.c:2265:31: note: use '=' to turn this equality comparison into an assignment if ((hldev->config.intr_mode == VXGE_HW_INTR_MODE_MSIX_ONE_SHOT)) ^~ = 1 warning generated. Link: https://github.com/ClangBuiltLinux/linux/issues/124Signed-off-by: -
Heiner Kallweit authored
When being in state PHY_HALTED we don't have to reschedule the state machine, phy_start() will start it again. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Romain Aviolat authored
This patch fixes a couple of issues highlighted by checkpatch.pl: * Missing a blank line after declarations * Alignment should match open parenthesis Signed-off-by:Romain Aviolat <r.aviolat@gmail.com> Signed-off-by:
-
- 21 Sep, 2018 20 commits
-
-
David S. Miller authored
Shahed Shaikh says: ==================== bnx2x: enhancements This series adds below changes - - support for VF spoof-check configuration through .ndo_set_vf_spoofchk. - workaround for MFW bug regarding unexpected bandwidth notifcation in single function mode. - supply VF link status as part of get VF config handling. ==================== Signed-off-by:
Shahed Shaikh <shahed.shaikh@cavium.com> Signed-off-by:
Ariel Elior <ariel.elior@cavium.com>
-
Shahed Shaikh authored
Provide current link status of VF in ndo_get_vf_config handler. Signed-off-by:
-
Shahed Shaikh authored
This is a workaround for FW bug - MFW generates bandwidth attention in single function mode, which is only expected to be generated in multi function mode. This undesired attention in SF mode results in incorrect HW configuration and resulting into Tx timeout. Signed-off-by:
-
Shahed Shaikh authored
Add support for `ndo_set_vf_spoofchk' to allow PF control over its VF spoof-checking configuration. Signed-off-by:
-
zhong jiang authored
kfree_skb has taken the null pointer into account. hence it is safe to remove the redundant null pointer check before kfree_skb. Signed-off-by:
zhong jiang <zhongjiang@huawei.com> Signed-off-by:
-
Dan Carpenter authored
We accidentally left out this error return so it leads to some use after free bugs later on. Fixes: 0a0be13b ("vhost_net: batch submitting XDP buffers to underlayer sockets") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
David S. Miller authored
zhong jiang says: ==================== net: remove redundant null pointer check before kfree_skb The issue is detected with the help of Coccinelle. ==================== Signed-off-by: -
zhong jiang authored
kfree_skb has taken the null pointer into account. hence it is safe to remove the redundant null pointer check before kfree_skb. Signed-off-by:
-
zhong jiang authored
kfree_skb has taken the null pointer into account. hence it is safe to remove the redundant null pointer check before kfree_skb. Signed-off-by:
-
zhong jiang authored
kfree_skb has taken the null pointer into account. hence it is safe to remove the redundant null pointer check before kfree_skb. Signed-off-by:
-
zhong jiang authored
kfree_skb has taken the null pointer into account. hence it is safe to remove the redundant null pointer check before kfree_skb. Signed-off-by:
-
zhong jiang authored
kfree_skb has taken the null pointer into account. hence it is safe to remove the redundant null pointer check before kfree_skb. Signed-off-by:
-
zhong jiang authored
kfree_skb has taken the null pointer into account. hence it is safe to remove the redundant null pointer check before kfree_skb. Signed-off-by:
-
zhong jiang authored
The continue will not truely skip any code. hence it is safe to remove it. Signed-off-by:
-
zhong jiang authored
The continue will not truely skip any code. hence it is safe to remove it. Signed-off-by:
-
Vlad Buslov authored
Action API was changed to work with actions and action_idr in concurrency safe manner, however tcf_del_walker() still uses actions without taking a reference or idrinfo->lock first, and deletes them directly, disregarding possible concurrent delete. Change tcf_del_walker() to take idrinfo->lock while iterating over actions and use new tcf_idr_release_unsafe() to release them while holding the lock. And the blocking function fl_hw_destroy_tmplt() could be called when we put a filter chain, so defer it to a work queue. Signed-off-by:
Vlad Buslov <vladbu@mellanox.com> [xiyou.wangcong@gmail.com: heavily modify the code and changelog] Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
David S. Miller authored
David Ahern says: ==================== net: wean netfilter from fib_nh Two netfilter modules reference fib_nh. In both cases the code is only checking if a nexthop in a fib_info uses a specific device. Both instances essentially duplicate code from __fib_validate_source, so move that code into a helper and flip the netfilter modules to use it. ==================== Signed-off-by: -
David Ahern authored
Convert nft_fib4_eval to the new device checking helper and remove the duplicate code. Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
David Ahern authored
Convert rpfilter_lookup_reverse to the new device checking helper and remove the duplicate code. Signed-off-by:
-
David Ahern authored
Move the device matching check in __fib_validate_source to a helper and export it for use by netfilter modules. Code move only; no functional change intended. Signed-off-by:
-
- 20 Sep, 2018 6 commits
-
-
Corentin Labbe authored
The header ocelot_dev_gmii.h is unused since the inclusion of the driver. It is unused, lets just remove it. Signed-off-by:
Corentin Labbe <clabbe@baylibre.com> Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Further MC-awareness configuration Petr says: Due to an issue in Spectrum chips, when unicast traffic shares the same queue as BUM traffic, and there is congestion, the BUM traffic is admitted to the queue anyway, thus pushing out all UC traffic. In order to give unicast traffic precedence over BUM traffic, multicast-aware mode is now configured on all ports. Under MC-aware mode, egress TCs 8..15 are used for BUM traffic, which has its own dedicated pool. This patch set improves the way that the MC pool and the higher-order TCs are integrated into the system. In patch #1, shaper at the higher TCs is configured to the same value that it has by default. It's better to have the corresponding artifact in the code explicitly. The 8 following patches gradually extend the devlink handling in mlxsw to support the extra TCs and the new MC pool. Patch #2 changes the way that pools are indexed in mlxsw. Instead of using (FW index, direction) tuple to identify the pool and the associated cache, mlxsw now uses devlink index. This change is necessary because the new pool 15 is not contiguously adjacent to the currently-used pools 0..3, and because it's only relevant on egress. Using devlink index relaxes the requirement for symmetry and adjacency imposed by using FW indexing. In patch #3, the assumption that number of ingress TCs matches that of egress TCs is relaxed to allow exposition of egress TCs 8..15. In patches #4, #5 and #6, support for infinite quotas is introduced. Infinite quotas are reported as taking all the memory in the system, but actually use a mechanism where the infinity is configured explicitly. In patches #7 and #8, support for configuring static pool sizes in introduced. Statically-sized pools have been supported for a while now, but during initialization, all pools have dynamic size. The patches allow there to be a mix of by-default static and dynamic pools. In patches #9 and #10, pool 15 resp. per-priority MC quotas are explicitly configured to be in sync with the current recommendation for handling BUM traffic in Spectrum chips. In the following 3 patches, an mlxsw-specific selftest is added to test the MC-awareness configuration. First in patches #11 and #12, lib.sh is extended with functions to collect ethtool stats, and to manage port MTU. Then in patch #13 the selftest itself is added. ==================== Signed-off-by: -
Petr Machata authored
A so-called "MC-aware" mode has recently been enabled in mlxsw. In MC-aware mode, BUM traffic is handled in a special way so that when a switch is flooded with BUM, UC performance isn't unduly impacted. Without enablement of this mode, a stream of BUM traffic can cause sustained UC throughput drop in excess of 99 %. Add a test for this behavior. Compare how much UC throughput degrades as a stream of broadcast frames floods the switch. A minimal degradation is tolerated to cover for glitches in traffic injection performance. Signed-off-by:
Petr Machata <petrm@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Petr Machata authored
Some selftests need to tweak MTU of an interface, and naturally should at teardown restore the MTU back to the original value. Add two functions to facilitate this MTU handling: mtu_set() to change MTU value, and mtu_reset() to change it back to what it was before. Signed-off-by:
-
Petr Machata authored
Add a new service function to obtain ethtool counters. Signed-off-by:
-
Petr Machata authored
The SBMM register configures shared buffer allocation and settings for MC packets according to switch priority. The recommended values are no reserved buffer and alpha of 1/4, which corresponds to buf_max of 6. Update mlxsw_sp_sb_mms accordingly. Signed-off-by:
-
