Steffen Klassert says:

====================
1) Copy policy family in clone_policy, otherwise this can
   trigger a BUG_ON in af_key. From Herbert Xu.

2) Revert "xfrm: Fix stack-out-of-bounds read in xfrm_state_find."
   This added a regression with transport mode when no addresses
   are configured on the policy template.

Both patches are stable candidates.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Arvind Yadav says:

====================
isdn: hisax: Fix pnp_irq's error checking

The pnp_irq() function returns -1 if an error occurs.
pnp_irq() error checking for zero is not correct.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The pnp_irq() function returns -1 if an error occurs.
pnp_irq() error checking for zero is not correct.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The pnp_irq() function returns -1 if an error occurs.
pnp_irq() error checking for zero is not correct.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The pnp_irq() function returns -1 if an error occurs.
pnp_irq() error checking for zero is not correct.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The pnp_irq() function returns -1 if an error occurs.
pnp_irq() error checking for zero is not correct.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The pnp_irq() function returns -1 if an error occurs.
pnp_irq() error checking for zero is not correct.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

pnp_irq() and pnp_port_start() can fail here and we must check
its return value.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The pnp_irq() function returns -1 if an error occurs.
pnp_irq() error checking for zero is not correct.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The pnp_irq() function returns -1 if an error occurs.
pnp_irq() error checking for zero is not correct.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The pnp_irq() function returns -1 if an error occurs.
pnp_irq() error checking for zero is not correct.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The pnp_irq() function returns -1 if an error occurs.
pnp_irq() error checking for zero is not correct.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The pnp_irq() function returns -1 if an error occurs.
pnp_irq() error checking for zero is not correct.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The pnp_irq() function returns -1 if an error occurs.
pnp_irq() error checking for zero is not correct.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The socket level flow control is based on the assumption that incoming
buffers meet the condition (skb->truesize / roundup(skb->len) <= 4),
where the latter value is rounded off upwards to the nearest 1k number.
This does empirically hold true for the device drivers we know, but we
cannot trust that it will always be so, e.g., in a system with jumbo
frames and very small packets.

We now introduce a check for this condition at packet arrival, and if
we find it to be false, we copy the packet to a new, smaller buffer,
where the condition will be true. We expect this to affect only a small
fraction of all incoming packets, if at all.
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This function is no longer marked 'inline', so we now get a warning
when it is unused:

net/netfilter/nf_conntrack_netlink.c:536:15: error: 'ctnetlink_proto_size' defined but not used [-Werror=unused-function]

We could mark it inline again, mark it __maybe_unused, or add an #ifdef
around the definition. I'm picking the third approach here since that
seems to be what the rest of the file has.

Fixes: 5caaed15 ("netfilter: conntrack: don't cache nlattr_tuple_size result in nla_size")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now CPSW driver configures min eth packet size to 60 octets (ETH_ZLEN)
which works in most of cases, but when port VLAN is configured on some
switch port, it also can be configured to force all egress packets to be
VLAN untagged. And in this case, CPSW driver will pad small packets to 60
octets, but final packet size on port egress can became less than 60 octets
due to VLAN tag removal and packet will be dropped.

Hence, fix it by accounting VLAN header in CPSW min eth packet size. While
here, use proper defines for CPSW_MAX_PACKET_SIZE also, instead of open
coding.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The IPv6 Segment Routing Header (SRH) format has been updated (revision 6
of the SRH ietf draft). The update includes the following SRH fields:

(1) The "First Segment" field changed to be "Last Entry" which contains
the index, in the Segment List, of the last element of the Segment List.

(2) The 16 bit "reserved" field now is used as a "tag" which tags a packet
as part of a class or group of packets, e.g.,packets sharing the same
set of properties.

This patch updates the struct ipv6_sr_hdr, so it complies with the updated
SRH draft. The 16 bit "reserved" field is changed to be "tag", In addition
a comment is added to the "first_segment" field, showing that it represents
the "Last Entry" field of the SRH.
Signed-off-by: Ahmed Abdelsalam <amsalam20@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rndis_filter_device_add() is called both from netvsc_probe() when we
initially create the device and from set channels/mtu/ringparam
routines where we basically remove the device and add it back.

hw_features is reset in rndis_filter_device_add() and filled with
host data. However, we lose all additional flags which are set outside
of the driver, e.g. register_netdevice() adds NETIF_F_SOFT_FEATURES and
many others.

Unfortunately, calls to rndis_{query_hwcaps(), _set_offload_params()}
calls cannot be avoided on every RNDIS reset: host expects us to set
required features explicitly. Moreover, in theory hardware capabilities
can change and we need to reflect the change in hw_features.

Reset net->hw_features bits according to host data in
rndis_netdev_set_hwcaps(), clear corresponding feature bits
from net->features in case some features went missing (will never happen
in real life I guess but let's be consistent).
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace kmalloc followed by a memset with kzalloc
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Ariel Elior <aelior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

According to the description, first argument of genlmsg_nlhdr() points to
what genlmsg_put() returns, i.e. beginning of user header. Therefore we
should only subtract size of genetlink header and netlink message header,
not user header.

This also means we don't need to pass the pointer to genetlink family and
the same is true for genl_dump_check_consistent() which is the only caller
of genlmsg_nlhdr(). (Note that at the moment, these functions are only
used for families which do not have user header so that they are not
affected.)

Fixes: 670dc283 ("netlink: advertise incomplete dumps")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now when resetting stream, if both in and out flags are set, the info
len can reach:
  sizeof(struct sctp_strreset_outreq) + SCTP_MAX_STREAM(65535) +
  sizeof(struct sctp_strreset_inreq)  + SCTP_MAX_STREAM(65535)
even without duplicated stream no, this value is far greater than the
chunk's max size.

_sctp_make_chunk doesn't do any check for this, which would cause the
skb it allocs is huge, syzbot even reported a crash due to this.

This patch is to check stream reset info len before making reconf
chunk and return EINVAL if the len exceeds chunk's capacity.

Thanks Marcelo and Neil for making this clear.

v1->v2:
  - move the check into sctp_send_reset_streams instead.

Fixes: cc16f00f ("sctp: add support for generating stream reconf ssn reset request chunk")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit dfcb9f4f ("sctp: deny peeloff operation on asocs with threads
sleeping on it") fixed the race between peeloff and wait sndbuf by
checking waitqueue_active(&asoc->wait) in sctp_do_peeloff().

But it actually doesn't work, as even if waitqueue_active returns false
the waiting sndbuf thread may still not yet hold sk lock. After asoc is
peeled off, sk is not asoc->base.sk any more, then to hold the old sk
lock couldn't make assoc safe to access.

This patch is to fix this by changing to hold the new sk lock if sk is
not asoc->base.sk, meanwhile, also set the sk in sctp_sendmsg with the
new sk.

With this fix, there is no more race between peeloff and waitbuf, the
check 'waitqueue_active' in sctp_do_peeloff can be removed.

Thanks Marcelo and Neil for making this clear.

v1->v2:
  fix it by changing to lock the new sock instead of adding a flag in asoc.
Suggested-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now in sctp_sendmsg sctp_wait_for_sndbuf could schedule out without
holding sock sk. It means the current asoc can be freed elsewhere,
like when receiving an abort packet.

If the asoc is just created in sctp_sendmsg and sctp_wait_for_sndbuf
returns err, the asoc will be freed again due to new_asoc is not nil.
An use-after-free issue would be triggered by this.

This patch is to fix it by setting new_asoc with nil if the asoc is
already dead when cpu schedules back, so that it will not be freed
again in sctp_sendmsg.

v1->v2:
  set new_asoc as nil in sctp_sendmsg instead of sctp_wait_for_sndbuf.
Suggested-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull IPMI updates from Corey Minyard:
 "This is a fairly large rework of the IPMI code, along with a bunch of
  smaller fixes. The major changes have been in the next tree for a
  couple of months, so they should be good to do in.

   - Some users had IPMI systems where the GUID of the IPMI controller
     could change. So rescanning of the GUID was added. The naming of
     some sysfs things was dependent on the GUID, however, so this
     resulted in the sysfs interface code in IPMI changing to remove
     that dependency and name the IPMI BMCs like other sysfs devices.

   - The ipmi_si_intf.c code was fairly bloated with all the different
     discovery methods (PCI, ACPI, SMBIOS, OF, platform, module
     parameters, hot add). The structure of how the interfaces were
     added was redone to make them more modular, then the individual
     methods were pulled out into their own files"

* tag 'ipmi-for-4.15' of git://github.com/cminyard/linux-ipmi: (48 commits)
  ipmi_si: Delete an error message for a failed memory allocation in try_smi_init()
  ipmi_si: fix memory leak on new_smi
  ipmi: remove redundant initialization of bmc
  ipmi: pr_err() strings should end with newlines
  ipmi: Clean up some print operations
  ipmi: Make the DMI probe into a generic platform probe
  ipmi: Make the IPMI proc interface configurable
  ipmi_ssif: Add device attrs for the things in proc
  ipmi_si: Add device attrs for the things in proc
  ipmi_si: remove ipmi_smi_alloc() function
  ipmi_si: Move port and mem I/O handling to their own files
  ipmi_si: Get rid of unused spacing and port fields
  ipmi_si: Move PARISC handling to another file
  ipmi_si: Move PCI setup to another file
  ipmi_si: Move platform device handling to another file
  ipmi_si: Move hardcode handling to a separate file.
  ipmi_si: Move the hotmod handling to another file.
  ipmi_si: Change ipmi_si_add_smi() to take just I/O info
  ipmi_si: Move io setup into io structure
  ipmi_si: Move irq setup handling into the io struct
  ...

Pull PCI updates from Bjorn Helgaas:

  - detach driver before tearing down procfs/sysfs (Alex Williamson)

  - disable PCIe services during shutdown (Sinan Kaya)

  - fix ASPM oops on systems with no Root Ports (Ard Biesheuvel)

  - fix ASPM LTR_L1.2_THRESHOLD programming (Bjorn Helgaas)

  - fix ASPM Common_Mode_Restore_Time computation (Bjorn Helgaas)

  - fix portdrv MSI/MSI-X vector allocation (Dongdong Liu, Bjorn
    Helgaas)

  - report non-fatal AER errors only to the affected endpoint (Gabriele
    Paoloni)

  - distribute bus numbers, MMIO, and I/O space among hotplug bridges to
    allow more devices to be hot-added (Mika Westerberg)

  - fix pciehp races during initialization and surprise link down (Mika
    Westerberg)

  - handle surprise-removed devices in PME handling (Qiang)

  - support resizable BARs for large graphics devices (Christian König)

  - expose SR-IOV offset, stride, and VF device ID via sysfs (Filippo
    Sironi)

  - create SR-IOV virtfn/physfn sysfs links before attaching driver
    (Stuart Hayes)

  - fix SR-IOV "ARI Capable Hierarchy" restore issue (Tony Nguyen)

  - enforce Kconfig IOV/REALLOC dependency (Sascha El-Sharkawy)

  - avoid slot reset if bridge itself is broken (Jan Glauber)

  - clean up pci_reset_function() path (Jan H. Schönherr)

  - make pci_map_rom() fail if the option ROM is invalid (Changbin Du)

  - convert timers to timer_setup() (Kees Cook)

  - move PCI_QUIRKS to PCI bus Kconfig menu (Randy Dunlap)

  - constify pci_dev_type and intel_mid_pci_ops (Bhumika Goyal)

  - remove unnecessary pci_dev, pci_bus, resource, pcibios_set_master()
    declarations (Bjorn Helgaas)

  - fix endpoint framework overflows and BUG()s (Dan Carpenter)

  - fix endpoint framework issues (Kishon Vijay Abraham I)

  - avoid broken Cavium CN8xxx bus reset behavior (David Daney)

  - extend Cavium ACS capability quirks (Vadim Lomovtsev)

  - support Synopsys DesignWare RC in ECAM mode (Ard Biesheuvel)

  - turn off dra7xx clocks cleanly on shutdown (Keerthy)

  - fix Faraday probe error path (Wei Yongjun)

  - support HiSilicon STB SoC PCIe host controller (Jianguo Sun)

  - fix Hyper-V interrupt affinity issue (Dexuan Cui)

  - remove useless ACPI warning for Hyper-V pass-through devices (Vitaly
    Kuznetsov)

  - support multiple MSI on iProc (Sandor Bodo-Merle)

  - support Layerscape LS1012a and LS1046a PCIe host controllers (Hou
    Zhiqiang)

  - fix Layerscape default error response (Minghuan Lian)

  - support MSI on Tango host controller (Marc Gonzalez)

  - support Tegra186 PCIe host controller (Manikanta Maddireddy)

  - use generic accessors on Tegra when possible (Thierry Reding)

  - support V3 Semiconductor PCI host controller (Linus Walleij)

* tag 'pci-v4.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (85 commits)
  PCI/ASPM: Add L1 Substates definitions
  PCI/ASPM: Reformat ASPM register definitions
  PCI/ASPM: Use correct capability pointer to program LTR_L1.2_THRESHOLD
  PCI/ASPM: Account for downstream device's Port Common_Mode_Restore_Time
  PCI: xgene: Rename xgene_pcie_probe_bridge() to xgene_pcie_probe()
  PCI: xilinx: Rename xilinx_pcie_link_is_up() to xilinx_pcie_link_up()
  PCI: altera: Rename altera_pcie_link_is_up() to altera_pcie_link_up()
  PCI: Fix kernel-doc build warning
  PCI: Fail pci_map_rom() if the option ROM is invalid
  PCI: Move pci_map_rom() error path
  PCI: Move PCI_QUIRKS to the PCI bus menu
  alpha/PCI: Make pdev_save_srm_config() static
  PCI: Remove unused declarations
  PCI: Remove redundant pci_dev, pci_bus, resource declarations
  PCI: Remove redundant pcibios_set_master() declarations
  PCI/PME: Handle invalid data when reading Root Status
  PCI: hv: Use effective affinity mask
  PCI: pciehp: Do not clear Presence Detect Changed during initialization
  PCI: pciehp: Fix race condition handling surprise link down
  PCI: Distribute available resources to hotplug-capable bridges
  ...

Pull rdma updates from Doug Ledford:
 "This is a fairly plain pull request. Lots of driver updates across the
  stack, a huge number of static analysis cleanups including a close to
  50 patch series from Bart Van Assche, and a number of new features
  inside the stack such as general CQ moderation support.

  Nothing really stands out, but there might be a few conflicts as you
  take things in. In particular, the cleanups touched some of the same
  lines as the new timer_setup changes.

  Everything in this pull request has been through 0day and at least two
  days of linux-next (since Stephen doesn't necessarily flag new
  errors/warnings until day2). A few more items (about 30 patches) from
  Intel and Mellanox showed up on the list on Tuesday. I've excluded
  those from this pull request, and I'm sure some of them qualify as
  fixes suitable to send any time, but I still have to review them
  fully. If they contain mostly fixes and little or no new development,
  then I will probably send them through by the end of the week just to
  get them out of the way.

  There was a break in my acceptance of patches which coincides with the
  computer problems I had, and then when I got things mostly back under
  control I had a backlog of patches to process, which I did mostly last
  Friday and Monday. So there is a larger number of patches processed in
  that timeframe than I was striving for.

  Summary:
   - Add iWARP support to qedr driver
   - Lots of misc fixes across subsystem
   - Multiple update series to hns roce driver
   - Multiple update series to hfi1 driver
   - Updates to vnic driver
   - Add kref to wait struct in cxgb4 driver
   - Updates to i40iw driver
   - Mellanox shared pull request
   - timer_setup changes
   - massive cleanup series from Bart Van Assche
   - Two series of SRP/SRPT changes from Bart Van Assche
   - Core updates from Mellanox
   - i40iw updates
   - IPoIB updates
   - mlx5 updates
   - mlx4 updates
   - hns updates
   - bnxt_re fixes
   - PCI write padding support
   - Sparse/Smatch/warning cleanups/fixes
   - CQ moderation support
   - SRQ support in vmw_pvrdma"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (296 commits)
  RDMA/core: Rename kernel modify_cq to better describe its usage
  IB/mlx5: Add CQ moderation capability to query_device
  IB/mlx4: Add CQ moderation capability to query_device
  IB/uverbs: Add CQ moderation capability to query_device
  IB/mlx5: Exposing modify CQ callback to uverbs layer
  IB/mlx4: Exposing modify CQ callback to uverbs layer
  IB/uverbs: Allow CQ moderation with modify CQ
  iw_cxgb4: atomically flush the qp
  iw_cxgb4: only call the cq comp_handler when the cq is armed
  iw_cxgb4: Fix possible circular dependency locking warning
  RDMA/bnxt_re: report vlan_id and sl in qp1 recv completion
  IB/core: Only maintain real QPs in the security lists
  IB/ocrdma_hw: remove unnecessary code in ocrdma_mbx_dealloc_lkey
  RDMA/core: Make function rdma_copy_addr return void
  RDMA/vmw_pvrdma: Add shared receive queue support
  RDMA/core: avoid uninitialized variable warning in create_udata
  RDMA/bnxt_re: synchronize poll_cq and req_notify_cq verbs
  RDMA/bnxt_re: Flush CQ notification Work Queue before destroying QP
  RDMA/bnxt_re: Set QP state in case of response completion errors
  RDMA/bnxt_re: Add memory barriers when processing CQ/EQ entries
  ...

Pull cgroup updates from Tejun Heo:
 "Cgroup2 cpu controller support is finally merged.

   - Basic cpu statistics support to allow monitoring by default without
     the CPU controller enabled.

   - cgroup2 cpu controller support.

   - /sys/kernel/cgroup files to help dealing with new / optional
     features"

* 'for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: export list of cgroups v2 features using sysfs
  cgroup: export list of delegatable control files using sysfs
  cgroup: mark @cgrp __maybe_unused in cpu_stat_show()
  MAINTAINERS: relocate cpuset.c
  cgroup, sched: Move basic cpu stats from cgroup.stat to cpu.stat
  sched: Implement interface for cgroup unified hierarchy
  sched: Misc preps for cgroup unified hierarchy interface
  sched/cputime: Add dummy cputime_adjust() implementation for CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
  cgroup: statically initialize init_css_set->dfl_cgrp
  cgroup: Implement cgroup2 basic CPU usage accounting
  cpuacct: Introduce cgroup_account_cputime[_field]()
  sched/cputime: Expose cputime_adjust()

Pull percpu update from Tejun Heo:
 "Another minor pull request. It only contains one commit which can
  reclaim a bit of memory wasted during boot on UP"

* 'for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: don't forget to free the temporary struct pcpu_alloc_info

Pull workqueue updates from Tejun Heo:
 "There was a commit to make unbound kworkers respect cpu isolation but
  it conflicted with the restructuring of cpu isolation and got
  reverted, so the only thing left is the trivial comment fix.

  Will retry the cpu isolation change after this merge window"

* 'for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Fix comment for unbound workqueue's attrbutes
  Revert "workqueue: respect isolated cpus when queueing an unbound work"
  workqueue: respect isolated cpus when queueing an unbound work

Pull libata updates from Tejun Heo:
 "Nothing too interesting or alarming. Other than a new power saving
  mode addition to ahci and crash fix on a tracepoint, all changes are
  trivial or device-specific"

* 'for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (22 commits)
  ahci: imx: Handle increased read failures for IMX53 temperature sensor in low frequency mode.
  ata: sata_dwc_460ex: Propagate platform device ID to DMA driver
  ata: fixes kernel crash while tracing ata_eh_link_autopsy event
  ata: pata_pdc2027x: Fix space before '[' error.
  libata: fix spelling mistake: 'ambigious' -> 'ambiguous'
  ata: ceva: Add SMMU support for SATA IP
  ata: ceva: Correct the suspend and resume logic for SATA
  ata: ceva: Correct the AXI bus configuration for SATA ports
  ata: ceva: Add CCI support for SATA if CCI is enabled
  ata: ceva: Make RxWaterMark value as module parameter
  ata: ceva: Disable Device Sleep capability
  ata: ceva: Add gen 3 mode support in driver
  ata: ceva: Move sata port phy oob settings to device-tree
  devicetree: bindings: Add sata port phy config parameters in ahci-ceva
  ata: mark expected switch fall-throughs
  ata: sata_mv: remove a redundant assignment to pointer ehi
  ahci: Add support for Cavium's fifth generation SATA controller
  ata: sata_rcar: Use of_device_get_match_data() helper
  libata: make ata_port_type const
  libata: make static arrays const, reduces object code size
  ...

Pull module updates from Jessica Yu:
 "Summary of modules changes for the 4.15 merge window:

   - treewide module_param_call() cleanup, fix up set/get function
     prototype mismatches, from Kees Cook

   - minor code cleanups"

* tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
  module: Do not paper over type mismatches in module_param_call()
  treewide: Fix function prototypes for module_param_call()
  module: Prepare to convert all module_param_call() prototypes
  kernel/module: Delete an error message for a failed memory allocation in add_module_usage()

Pull mailbox updates from Jassi Brar:
 "Change to POLL api and fixes for FlexRM and OMAP driver.

  Summary:

   - Core: Prefer ACK method over POLL, if both supported

   - Test: use flag instead of special character

   - FlexRM: Usual driver internal minor churn

   - Omap: fix error path"

* tag 'mailbox-v4.15' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox/omap: unregister mbox class
  mailbox: mailbox-test: don't rely on rx_buffer content to signal data ready
  mailbox: reset txdone_method TXDONE_BY_POLL if client knows_txdone
  mailbox: Build Broadcom FlexRM driver as loadable module for iProc SOCs
  mailbox: bcm-flexrm-mailbox: Use common GPL comment header
  mailbox: bcm-flexrm-mailbox: add depends on ARCH_BCM_IPROC
  mailbox: bcm-flexrm-mailbox: Print ring number in errors and warnings
  mailbox: bcm-flexrm-mailbox: Fix FlexRM ring flush sequence

Pull power supply and reset updates from Sebastian Reichel:

 - misc minor fixes

* tag 'for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  power: supply: cpcap-charger: fix incorrect return value check
  power: supply: replace pr_* with dev_*
  power: supply: pcf50633-charger: remove redundant variable charging_start
  power: supply: generic-adc-battery: remove redundant variable pdata
  power: supply: max8997: Improve a size determination in probe

Pull HSI updates from Sebastian Reichel:

 - add HSI OMAP4 bindings

 - misc small fixes

* tag 'hsi-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
  dt-bindings: hsi: add omap4 hsi controller bindings
  HSI: hsi_char: pr_err() strings should end with newlines
  HSI: omap_ssi_core: fix kilo to be "k" not "K"

Pull SELinux updates from Paul Moore:
 "Seven SELinux patches for v4.15, although five of the seven are small
  build fixes and cleanups.

  Of the remaining two patches, the only one worth really calling out is
  Eric's fix for the SELinux filesystem xattr set/remove code; the other
  patch simply converts the SELinux hash table implementation to use
  kmem_cache.

  Eric's setxattr/removexattr tweak converts SELinux back to calling the
  commoncap implementations when the xattr is not SELinux related. The
  immediate win is to fixup filesystem capabilities in user namespaces,
  but it makes things a bit saner overall; more information in the
  commit description"

* tag 'selinux-pr-20171113' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: remove extraneous initialization of slots_used and max_chain_len
  selinux: remove redundant assignment to len
  selinux: remove redundant assignment to str
  selinux: fix build warning
  selinux: fix build warning by removing the unused sid variable
  selinux: Perform both commoncap and selinux xattr checks
  selinux: Use kmem_cache for hashtab_node

Pull audit updates from Paul Moore:
 "Another relatively small pull request for audit, nine patches total.

  The only real new bit of functionality is the patch from Richard which
  adds the ability to filter records based on the filesystem type.

  The remainder are bug fixes and cleanups; the bug fix highlights
  include:

   - ensuring that we properly audit init/PID-1 (me)

   - allowing the audit daemon to shutdown the kernel/auditd connection
     cleanly by setting the audit PID to zero (Steve)"

* tag 'audit-pr-20171113' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit: filter PATH records keyed on filesystem magic
  Audit: remove unused audit_log_secctx function
  audit: Allow auditd to set pid to 0 to end auditing
  audit: Add new syscalls to the perm=w filter
  audit: use audit_set_enabled() in audit_enable()
  audit: convert audit_ever_enabled to a boolean
  audit: don't use simple_strtol() anymore
  audit: initialize the audit subsystem as early as possible
  audit: ensure that 'audit=1' actually enables audit for PID 1

This matters at least for the mincore syscall, which will otherwise copy
uninitialized memory from the page allocator to userspace.  It is
probably also a correctness error for /proc/$pid/pagemap, but I haven't
tested that.

Removing the `walk->hugetlb_entry` condition in walk_hugetlb_range() has
no effect because the caller already checks for that.

This only reports holes in hugetlb ranges to callers who have specified
a hugetlb_entry callback.

This issue was found using an AFL-based fuzzer.

v2:
 - don't crash on ->pte_hole==NULL (Andrew Morton)
 - add Cc stable (Andrew Morton)

Fixes: 1e25a271 ("mincore: apply page table walker on do_mincore()")
Signed-off-by: Jann Horn <jannh@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking updates from David Miller:
 "Highlights:

   1) Maintain the TCP retransmit queue using an rbtree, with 1GB
      windows at 100Gb this really has become necessary. From Eric
      Dumazet.

   2) Multi-program support for cgroup+bpf, from Alexei Starovoitov.

   3) Perform broadcast flooding in hardware in mv88e6xxx, from Andrew
      Lunn.

   4) Add meter action support to openvswitch, from Andy Zhou.

   5) Add a data meta pointer for BPF accessible packets, from Daniel
      Borkmann.

   6) Namespace-ify almost all TCP sysctl knobs, from Eric Dumazet.

   7) Turn on Broadcom Tags in b53 driver, from Florian Fainelli.

   8) More work to move the RTNL mutex down, from Florian Westphal.

   9) Add 'bpftool' utility, to help with bpf program introspection.
      From Jakub Kicinski.

  10) Add new 'cpumap' type for XDP_REDIRECT action, from Jesper
      Dangaard Brouer.

  11) Support 'blocks' of transformations in the packet scheduler which
      can span multiple network devices, from Jiri Pirko.

  12) TC flower offload support in cxgb4, from Kumar Sanghvi.

  13) Priority based stream scheduler for SCTP, from Marcelo Ricardo
      Leitner.

  14) Thunderbolt networking driver, from Amir Levy and Mika Westerberg.

  15) Add RED qdisc offloadability, and use it in mlxsw driver. From
      Nogah Frankel.

  16) eBPF based device controller for cgroup v2, from Roman Gushchin.

  17) Add some fundamental tracepoints for TCP, from Song Liu.

  18) Remove garbage collection from ipv6 route layer, this is a
      significant accomplishment. From Wei Wang.

  19) Add multicast route offload support to mlxsw, from Yotam Gigi"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2177 commits)
  tcp: highest_sack fix
  geneve: fix fill_info when link down
  bpf: fix lockdep splat
  net: cdc_ncm: GetNtbFormat endian fix
  openvswitch: meter: fix NULL pointer dereference in ovs_meter_cmd_reply_start
  netem: remove unnecessary 64 bit modulus
  netem: use 64 bit divide by rate
  tcp: Namespace-ify sysctl_tcp_default_congestion_control
  net: Protect iterations over net::fib_notifier_ops in fib_seq_sum()
  ipv6: set all.accept_dad to 0 by default
  uapi: fix linux/tls.h userspace compilation error
  usbnet: ipheth: prevent TX queue timeouts when device not ready
  vhost_net: conditionally enable tx polling
  uapi: fix linux/rxrpc.h userspace compilation errors
  net: stmmac: fix LPI transitioning for dwmac4
  atm: horizon: Fix irq release error
  net-sysfs: trigger netlink notification on ifalias change via sysfs
  openvswitch: Using kfree_rcu() to simplify the code
  openvswitch: Make local function ovs_nsh_key_attr_size() static
  openvswitch: Fix return value check in ovs_meter_cmd_features()
  ...

Pull MIPS updates from James Hogan:
 "These are the main MIPS changes for 4.15.

  Fixes:
   - ralink: Fix MT7620 PCI build issues (4.5)
   - Disable cmpxchg64() and HAVE_VIRT_CPU_ACCOUNTING_GEN for 32-bit SMP
     (4.1)
   - Fix MIPS64 FP save/restore on 32-bit kernels (4.0)
   - ptrace: Pick up ptrace/seccomp changed syscall numbers (3.19)
   - ralink: Fix MT7628 pinmux (3.19)
   - BCM47XX: Fix LED inversion on WRT54GSv1 (3.17)
   - Fix n32 core dumping as o32 since regset support (3.13)
   - ralink: Drop obsolete USB_ARCH_HAS_HCD select

  Build system:
   - Default to "generic" (multiplatform) system type instead of IP22
   - Use generic little endian MIPS32 r2 configuration as default
     defconfig instead of ip22_defconfig

  FPU emulation:
   - Fix exception generation for certain R6 FPU instructions

  SMP:
   - Allow __cpu_number_map to be larger than NR_CPUS for sparse CPU id
     spaces

  Miscellaneous:
   - Add iomem resource for kernel bss section for kexec/kdump
   - Atomics: Nudge writes on bit unlock
   - DT files: Standardise "ok" -> "okay"

  Minor cleanups:
   - Define virt_to_pfn()
   - Make thread_saved_pc static
   - Simplify 32-bit sign extension in __read_64bit_c0_split()
   - DMA: Use vma_pages() helper
   - FPU emulation: Replace unsigned with unsigned int
   - MM: Removed unused lastpfn
   - Alchemy: Make clk_ops const
   - Lasat: Use setup_timer() helper
   - ralink: Use BIT() in MT7620 PCI driver

  Platform support:

  BMIPS:
  - Enable HARDIRQS_SW_RESEND

  Broadcom BCM63XX:
  - Add clkdev lookup support
  - Update clk driver, UART driver, DTs to handle named refclk from DTs
  - Split apart various clocks to more closely match hardware
  - Add ethernet clocks

  Cavium Octeon:
  - Remove usage of cvmx_wait() in favour of __delay()

  ImgTec Pistachio:
  - DT: Drop deprecated dwmmc num-slots property

  Ingenic JZ4780:
  - Add NFS root to Ci20 defconfig
  - Add watchdog to Ci20 DT & defconfig, and allow building of watchdog
    driver with this SoC

  Generic (multiplatform):
  - Migrate xilfpga (MIPSfpga) platform to the generic platform

  Lantiq xway:
  - Fix ASC0/ASC1 clocks"

* tag 'mips_4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: (46 commits)
  MIPS: Add iomem resource for kernel bss section.
  MIPS: cmpxchg64() and HAVE_VIRT_CPU_ACCOUNTING_GEN don't work for 32-bit SMP
  MIPS: BMIPS: Enable HARDIRQS_SW_RESEND
  MIPS: pci: Make use of the BIT() macro inside the mt7620 driver
  MIPS: pci: Remove KERN_WARN instance inside the mt7620 driver
  MIPS: pci: Remove duplicate define in mt7620 driver
  MIPS: ralink: Fix typo in mt7628 pinmux function
  MIPS: ralink: Fix MT7628 pinmux
  MIPS: Fix odd fp register warnings with MIPS64r2
  watchdog: jz4780: Allow selection of jz4740-wdt driver
  MIPS/ptrace: Update syscall nr on register changes
  MIPS/ptrace: Pick up ptrace/seccomp changed syscalls
  MIPS: Fix an n32 core file generation regset support regression
  MIPS: Fix MIPS64 FP save/restore on 32-bit kernels
  MIPS: page.h: Define virt_to_pfn()
  MIPS: Xilfpga: Switch to using generic defconfigs
  MIPS: generic: Add support for MIPSfpga
  MIPS: Set defconfig target to a generic system for 32r2el
  MIPS: Kconfig: Set default MIPS system type as generic
  MIPS: DTS: Remove num-slots from Pistachio SoC
  ...