Several bpf tests are interrupted by the default timeout of 45 seconds added
by commit 852c8cbf ("selftests/kselftest/runner.sh: Add 45 second
timeout per test"). In my case it was test_progs, test_tunnel.sh,
test_lwt_ip_encap.sh and test_xdping.sh.

There's not much value in having a timeout for bpf tests, switch it off.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/7a9198ed10917f4ecab4a3dd74bcda1200791efd.1596739059.git.jbenc@redhat.com

I get the following error during compilation on my side:
kernel/trace/bpf_trace.c: In function 'bpf_do_trace_printk':
kernel/trace/bpf_trace.c:386:34: error: function 'bpf_do_trace_printk' can never be inlined because it uses variable argument lists
 static inline __printf(1, 0) int bpf_do_trace_printk(const char *fmt, ...)
                                  ^

Fixes: ac5a72ea ("bpf: Use dedicated bpf_trace_printk event instead of trace_printk()")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200806182612.1390883-1-sdf@google.com

int sets_patch(struct object *obj) doesn't have a 'return 0' at the end.

Fixes: fbbb68de ("bpf: Add resolve_btfids tool to resolve BTF IDs in ELF object")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200806155225.637202-1-sdf@google.com

Recently, from commit 94a1fedd ("libbpf: Add btf__parse_raw() and
generic btf__parse() APIs"), new API has been added to libbpf that
allows to parse BTF from raw data file (btf__parse_raw()).

The commit derives build failure of samples/bpf due to improper access
of uninitialized pointer at btf_parse_raw().

    btf.c: In function btf__parse_raw:
    btf.c:625:28: error: btf may be used uninitialized in this function
      625 |  return err ? ERR_PTR(err) : btf;
          |         ~~~~~~~~~~~~~~~~~~~^~~~~

This commit fixes the build failure of samples/bpf by adding code of
initializing btf pointer as NULL.

Fixes: 94a1fedd ("libbpf: Add btf__parse_raw() and generic btf__parse() APIs")
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200805223359.32109-1-danieltimlee@gmail.com

Yonghong Song says:

====================
Andrii raised a concern that current uapi for bpf iterator map
element is a little restrictive and not suitable for future potential
complex customization. This is a valid suggestion, considering people
may indeed add more complex custimization to the iterator, e.g.,
cgroup_id + user_id, etc. for task or task_file. Another example might
be map_id plus additional control so that the bpf iterator may bail
out a bucket earlier if a bucket has too many elements which may hold
lock too long and impact other parts of systems.

Patch #1 modified uapi with kernel changes. Patch #2
adjusted libbpf api accordingly.

Changelogs:
  v3 -> v4:
    . add a forward declaration of bpf_iter_link_info in
      tools/lib/bpf/bpf.h in case that libbpf is built against
      not-latest uapi bpf.h.
    . target the patch set to "bpf" instead of "bpf-next"
  v2 -> v3:
    . undo "not reject iter_info.map.map_fd == 0" from v1.
      In the future map_fd may become optional, so let us use map_fd == 0
      indicating the map_fd is not set by user space.
    . add link_info_len to bpf_iter_attach_opts to ensure always correct
      link_info_len from user. Otherwise, libbpf may deduce incorrect
      link_info_len if it uses different uapi header than the user app.
  v1 -> v2:
    . ensure link_create target_fd/flags == 0 since they are not used. (Andrii)
    . if either of iter_info ptr == 0 or iter_info_len == 0, but not both,
      return error to user space. (Andrii)
    . do not reject iter_info.map.map_fd == 0, go ahead to use it trying to
      get a map reference since the map_fd is required for map_elem iterator.
    . use bpf_iter_link_info in bpf_iter_attach_opts instead of map_fd.
      this way, user space is responsible to set up bpf_iter_link_info and
      libbpf just passes the data to the kernel, simplifying libbpf design.
      (Andrii)
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Previous commit adjusted kernel uapi for map
element bpf iterator. This patch adjusted libbpf API
due to uapi change. bpftool and bpf_iter selftests
are also changed accordingly.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200805055058.1457623-1-yhs@fb.com

Commit a5cbe05a ("bpf: Implement bpf iterator for
map elements") added bpf iterator support for
map elements. The map element bpf iterator requires
info to identify a particular map. In the above
commit, the attr->link_create.target_fd is used
to carry map_fd and an enum bpf_iter_link_info
is added to uapi to specify the target_fd actually
representing a map_fd:
    enum bpf_iter_link_info {
	BPF_ITER_LINK_UNSPEC = 0,
	BPF_ITER_LINK_MAP_FD = 1,

	MAX_BPF_ITER_LINK_INFO,
    };

This is an extensible approach as we can grow
enumerator for pid, cgroup_id, etc. and we can
unionize target_fd for pid, cgroup_id, etc.
But in the future, there are chances that
more complex customization may happen, e.g.,
for tasks, it could be filtered based on
both cgroup_id and user_id.

This patch changed the uapi to have fields
	__aligned_u64	iter_info;
	__u32		iter_info_len;
for additional iter_info for link_create.
The iter_info is defined as
	union bpf_iter_link_info {
		struct {
			__u32   map_fd;
		} map;
	};

So future extension for additional customization
will be easier. The bpf_iter_link_info will be
passed to target callback to validate and generic
bpf_iter framework does not need to deal it any
more.

Note that map_fd = 0 will be considered invalid
and -EBADF will be returned to user space.

Fixes: a5cbe05a ("bpf: Implement bpf iterator for map elements")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200805055056.1457463-1-yhs@fb.com

runqslower's Makefile is building/installing bpftool into
$(OUTPUT)/sbin/bpftool, which coincides with $(DEFAULT_BPFTOOL). In practice
this means that often when building selftests from scratch (after `make
clean`), selftests are racing with runqslower to simultaneously build bpftool
and one of the two processes fail due to file being busy. Prevent this race by
explicitly order-depending on $(BPFTOOL_DEFAULT).

Fixes: a2c9652f ("selftests: Refactor build to remove tools/lib/bpf from include path")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200805004757.2960750-1-andriin@fb.com

There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull smack updates from Casey Schaufler:
 "Minor fixes to Smack for the v5.9 release.

  All were found by automated checkers and have straightforward
  resolution"

* tag 'Smack-for-5.9' of git://github.com/cschaufler/smack-next:
  Smack: prevent underflow in smk_set_cipso()
  Smack: fix another vsscanf out of bounds
  Smack: fix use-after-free in smk_write_relabel_self()

Pull MIPS upates from Thomas Bogendoerfer:

 - improvements for Loongson64

 - extended ingenic support

 - removal of not maintained paravirt system type

 - cleanups and fixes

* tag 'mips_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (81 commits)
  MIPS: SGI-IP27: always enable NUMA in Kconfig
  MAINTAINERS: Update KVM/MIPS maintainers
  MIPS: Update default config file for Loongson-3
  MIPS: KVM: Add kvm guest support for Loongson-3
  dt-bindings: mips: Document Loongson kvm guest board
  MIPS: handle Loongson-specific GSExc exception
  MIPS: add definitions for Loongson-specific CP0.Diag1 register
  MIPS: only register FTLBPar exception handler for supported models
  MIPS: ingenic: Hardcode mem size for qi,lb60 board
  MIPS: DTS: ingenic/qi,lb60: Add model and memory node
  MIPS: ingenic: Use fw_passed_dtb even if CONFIG_BUILTIN_DTB
  MIPS: head.S: Init fw_passed_dtb to builtin DTB
  of: address: Fix parser address/size cells initialization
  of_address: Guard of_bus_pci_get_flags with CONFIG_PCI
  MIPS: DTS: Fix number of msi vectors for Loongson64G
  MIPS: Loongson64: Add ISA node for LS7A PCH
  MIPS: Loongson64: DTS: Fix ISA and PCI I/O ranges for RS780E PCH
  MIPS: Loongson64: Enlarge IO_SPACE_LIMIT
  MIPS: Loongson64: Process ISA Node in DeviceTree
  of_address: Add bus type match for pci ranges parser
  ...

Pull ARM updates from Russell King:

 - add arch/arm/Kbuild from Masahiro Yamada.

 - simplify act_mm macro, since it contains an open-coded
   get_thread_info.

 - VFP updates for Clang from Stefan Agner.

 - Fix unwinder for Clang from Nathan Huckleberry.

 - Remove unused it8152 PCI host controller, used by the removed cm-x2xx
   platforms from Mike Rapoport.

 - Further explanation of __range_ok().

 - Remove kimage_voffset that isn't used anymore from Marc Zyngier.

 - Drop ancient Thumb-2 workaround for old binutils from Ard Biesheuvel.

 - Documentation cleanup for mach-* from Pete Zaitcev.

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8996/1: Documentation/Clean up the description of mach-<class>
  ARM: 8995/1: drop Thumb-2 workaround for ancient binutils
  ARM: 8994/1: mm: drop kimage_voffset which was only used by KVM
  ARM: uaccess: add further explanation of __range_ok()
  ARM: 8993/1: remove it8152 PCI controller driver
  ARM: 8992/1: Fix unwind_frame for clang-built kernels
  ARM: 8991/1: use VFP assembler mnemonics if available
  ARM: 8990/1: use VFP assembler mnemonics in register load/store macros
  ARM: 8989/1: use .fpu assembler directives instead of assembler arguments
  ARM: 8982/1: mm: Simplify act_mm macro
  ARM: 8981/1: add arch/arm/Kbuild

Pull arch/csky updates from Guo Ren:
 "New features:
   - seccomp-filter
   - err-injection
   - top-down&random mmap-layout
   - irq_work
   - show_ipi
   - context-tracking

  Fixes & Optimizations:
   - kprobe_on_ftrace
   - optimize panic print"

* tag 'csky-for-linus-5.9-rc1' of https://github.com/c-sky/csky-linux:
  csky: Add context tracking support
  csky: Add arch_show_interrupts for IPI interrupts
  csky: Add irq_work support
  csky: Fixup warning by EXPORT_SYMBOL(kmap)
  csky: Set CONFIG_NR_CPU 4 as default
  csky: Use top-down mmap layout
  csky: Optimize the trap processing flow
  csky: Add support for function error injection
  csky: Fixup kprobes handler couldn't change pc
  csky: Fixup duplicated restore sp in RESTORE_REGS_FTRACE
  csky: Add cpu feature register hint for smp
  csky: Add SECCOMP_FILTER supported
  csky: remove unusued thread_saved_pc and *_segments functions/macros

Pull Xtensa updates from Max Filippov:

 - add syscall audit support

 - add seccomp filter support

 - clean up make rules under arch/xtensa/boot

 - fix state management for exclusive access opcodes

 - fix build with PMU enabled

* tag 'xtensa-20200805' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: add missing exclusive access state management
  xtensa: fix xtensa_pmu_setup prototype
  xtensa: add boot subdirectories build artifacts to 'targets'
  xtensa: add uImage and xipImage to targets
  xtensa: move vmlinux.bin[.gz] to boot subdirectory
  xtensa: initialize_mmu.h: fix a duplicated word
  selftests/seccomp: add xtensa support
  xtensa: add seccomp support
  xtensa: expose syscall through user_pt_regs
  xtensa: add audit support

Pull hyperv updates from Wei Liu:

 - A patch series from Andrea to improve vmbus code

 - Two clean-up patches from Alexander and Randy

* tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  hyperv: hyperv.h: drop a duplicated word
  tools: hv: change http to https in hv_kvp_daemon.c
  Drivers: hv: vmbus: Remove the lock field from the vmbus_channel struct
  scsi: storvsc: Introduce the per-storvsc_device spinlock
  Drivers: hv: vmbus: Remove unnecessary channel->lock critical sections (sc_list updaters)
  Drivers: hv: vmbus: Use channel_mutex in channel_vp_mapping_show()
  Drivers: hv: vmbus: Remove unnecessary channel->lock critical sections (sc_list readers)
  Drivers: hv: vmbus: Replace cpumask_test_cpu(, cpu_online_mask) with cpu_online()
  Drivers: hv: vmbus: Remove the numa_node field from the vmbus_channel struct
  Drivers: hv: vmbus: Remove the target_vp field from the vmbus_channel struct

Pull networking updates from David Miller:

 1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.

 2) Support UDP segmentation in code TSO code, from Eric Dumazet.

 3) Allow flashing different flash images in cxgb4 driver, from Vishal
    Kulkarni.

 4) Add drop frames counter and flow status to tc flower offloading,
    from Po Liu.

 5) Support n-tuple filters in cxgb4, from Vishal Kulkarni.

 6) Various new indirect call avoidance, from Eric Dumazet and Brian
    Vazquez.

 7) Fix BPF verifier failures on 32-bit pointer arithmetic, from
    Yonghong Song.

 8) Support querying and setting hardware address of a port function via
    devlink, use this in mlx5, from Parav Pandit.

 9) Support hw ipsec offload on bonding slaves, from Jarod Wilson.

10) Switch qca8k driver over to phylink, from Jonathan McDowell.

11) In bpftool, show list of processes holding BPF FD references to
    maps, programs, links, and btf objects. From Andrii Nakryiko.

12) Several conversions over to generic power management, from Vaibhav
    Gupta.

13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry
    Yakunin.

14) Various https url conversions, from Alexander A. Klimov.

15) Timestamping and PHC support for mscc PHY driver, from Antoine
    Tenart.

16) Support bpf iterating over tcp and udp sockets, from Yonghong Song.

17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov.

18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan.

19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several
    drivers. From Luc Van Oostenryck.

20) XDP support for xen-netfront, from Denis Kirjanov.

21) Support receive buffer autotuning in MPTCP, from Florian Westphal.

22) Support EF100 chip in sfc driver, from Edward Cree.

23) Add XDP support to mvpp2 driver, from Matteo Croce.

24) Support MPTCP in sock_diag, from Paolo Abeni.

25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic
    infrastructure, from Jakub Kicinski.

26) Several pci_ --> dma_ API conversions, from Christophe JAILLET.

27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel.

28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki.

29) Refactor a lot of networking socket option handling code in order to
    avoid set_fs() calls, from Christoph Hellwig.

30) Add rfc4884 support to icmp code, from Willem de Bruijn.

31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei.

32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin.

33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin.

34) Support TCP syncookies in MPTCP, from Flowian Westphal.

35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano
    Brivio.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits)
  net: thunderx: initialize VF's mailbox mutex before first usage
  usb: hso: remove bogus check for EINPROGRESS
  usb: hso: no complaint about kmalloc failure
  hso: fix bailout in error case of probe
  ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
  selftests/net: relax cpu affinity requirement in msg_zerocopy test
  mptcp: be careful on subflow creation
  selftests: rtnetlink: make kci_test_encap() return sub-test result
  selftests: rtnetlink: correct the final return value for the test
  net: dsa: sja1105: use detected device id instead of DT one on mismatch
  tipc: set ub->ifindex for local ipv6 address
  ipv6: add ipv6_dev_find()
  net: openvswitch: silence suspicious RCU usage warning
  Revert "vxlan: fix tos value before xmit"
  ptp: only allow phase values lower than 1 period
  farsync: switch from 'pci_' to 'dma_' API
  wan: wanxl: switch from 'pci_' to 'dma_' API
  hv_netvsc: do not use VF device if link is down
  dpaa2-eth: Fix passing zero to 'PTR_ERR' warning
  net: macb: Properly handle phylink on at91sam9x
  ...

Pull drm updates from Dave Airlie:
 "New xilinx displayport driver, AMD support for two new GPUs (more
  header files), i915 initial support for RocketLake and some work on
  their DG1 (discrete chip).

  The core also grew some lockdep annotations to try and constrain what
  drivers do with dma-fences, and added some documentation on why the
  idea of indefinite fences doesn't work.

  The long list is below.

  I do have some fixes trees outstanding, but I'll follow up with those
  later.

  core:
   - add user def flag to cmd line modes
   - dma_fence_wait added might_sleep
   - dma-fence lockdep annotations
   - indefinite fences are bad documentation
   - gem CMA functions used in more drivers
   - struct mutex removal
   - more drm_ debug macro usage
   - set/drop master api fixes
   - fix for drm/mm hole size comparison
   - drm/mm remove invalid entry optimization
   - optimise drm/mm hole handling
   - VRR debugfs added
   - uncompressed AFBC modifier support
   - multiple display id blocks in EDID
   - multiple driver sg handling fixes
   - __drm_atomic_helper_crtc_reset in all drivers
   - managed vram helpers

  ttm:
   - ttm_mem_reg handling cleanup
   - remove bo offset field
   - drop CMA memtype flag
   - drop mappable flag

  xilinx:
   - New Xilinx ZynqMP DisplayPort Subsystem driver

  nouveau:
   - add CRC support
   - start using NVIDIA published class header files
   - convert all push buffer emission to new macros
   - Proper push buffer space management for EVO/NVD channels.
   - firmware loading fixes
   - 2MiB system memory pages support on Pascal and newer

  vkms:
   - larger cursor support

  i915:
   - Rocketlake platform enablement
   - Early DG1 enablement
   - Numerous GEM refactorings
   - DP MST fixes
   - FBC, PSR, Cursor, Color, Gamma fixes
   - TGL, RKL, EHL workaround updates
   - TGL 8K display support fixes
   - SDVO/HDMI/DVI fixes

  amdgpu:
   - Initial support for Sienna Cichlid GPU
   - Initial support for Navy Flounder GPU
   - SI UVD/VCE support
   - expose rotation property
   - Add support for unique id on Arcturus
   - Enable runtime PM on vega10 boards that support BACO
   - Skip BAR resizing if the bios already did id
   - Major swSMU code cleanup
   - Fixes for DCN bandwidth calculations

  amdkfd:
   - Track SDMA usage per process
   - SMI events interface

  radeon:
   - Default to on chip GART for AGP boards on all arches
   - Runtime PM reference count fixes

  msm:
   - headers regenerated causing churn
   - a650/a640 display and GPU enablement
   - dpu dither support for 6bpc panels
   - dpu cursor fix
   - dsi/mdp5 enablement for sdm630/sdm636/sdm66

  tegra:
   - video capture prep support
   - reflection support

  mediatek:
   - convert mtk_dsi to bridge API

  meson:
   - FBC support

  sun4i:
   - iommu support

  rockchip:
   - register locking fix
   - per-pixel alpha support PX30 VOP

  mgag200:
   - ported to simple and shmem helpers
   - device init cleanups
   - use managed pci functions
   - dropped hw cursor support

  ast:
   - use managed pci functions
   - use managed VRAM helpers
   - rework cursor support

  malidp:
   - dev_groups support

  hibmc:
   - refactor hibmc_drv_vdac:

  vc4:
   - create TXP CRTC

  imx:
   - error path fixes and cleanups

  etnaviv:
   - clock handling and error handling cleanups
   - use pin_user_pages"

* tag 'drm-next-2020-08-06' of git://anongit.freedesktop.org/drm/drm: (1747 commits)
  drm/msm: use kthread_create_worker instead of kthread_run
  drm/msm/mdp5: Add MDP5 configuration for SDM636/660
  drm/msm/dsi: Add DSI configuration for SDM660
  drm/msm/mdp5: Add MDP5 configuration for SDM630
  drm/msm/dsi: Add phy configuration for SDM630/636/660
  drm/msm/a6xx: add A640/A650 hwcg
  drm/msm/a6xx: hwcg tables in gpulist
  drm/msm/dpu: add SM8250 to hw catalog
  drm/msm/dpu: add SM8150 to hw catalog
  drm/msm/dpu: intf timing path for displayport
  drm/msm/dpu: set missing flush bits for INTF_2 and INTF_3
  drm/msm/dpu: don't use INTF_INPUT_CTRL feature on sdm845
  drm/msm/dpu: move some sspp caps to dpu_caps
  drm/msm/dpu: update UBWC config for sm8150 and sm8250
  drm/msm/dpu: use right setup_blend_config for sm8150 and sm8250
  drm/msm/a6xx: set ubwc config for A640 and A650
  drm/msm/adreno: un-open-code some packets
  drm/msm: sync generated headers
  drm/msm/a6xx: add build_bw_table for A640/A650
  drm/msm/a6xx: fix crashstate capture for A650
  ...

Pull LED updates from Pavel Machek:
 "Okay, so... this one is interesting. RGB LEDs are very common, and we
  need to have some kind of support for them. Multicolor is for
  arbitrary set of LEDs in one package, RGB is for LEDs that can produce
  full range of colors. We do not have real multicolor LED that is not
  RGB in the pipeline, so that one is disabled for now.

  You can expect this saga to continue with next pull requests"

* tag 'leds-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: (37 commits)
  MAINTAINERS: Remove myself as LED subsystem maintainer
  leds: disallow /sys/class/leds/*:multi:* for now
  leds: add RGB color option, as that is different from multicolor.
  Make LEDS_LP55XX_COMMON depend on I2C to fix build errors:
  Documentation: ABI: leds-turris-omnia: document sysfs attribute
  leds: initial support for Turris Omnia LEDs
  dt-bindings: leds: add cznic,turris-omnia-leds binding
  leds: pattern trigger -- check pattern for validity
  leds: Replace HTTP links with HTTPS ones
  leds: trigger: add support for LED-private device triggers
  leds: lp5521: Add multicolor framework multicolor brightness support
  leds: lp5523: Update the lp5523 code to add multicolor brightness function
  leds: lp55xx: Add multicolor framework support to lp55xx
  leds: lp55xx: Convert LED class registration to devm_*
  dt-bindings: leds: Convert leds-lp55xx to yaml
  leds: multicolor: Introduce a multicolor class definition
  leds: Add multicolor ID to the color ID list
  dt: bindings: Add multicolor class dt bindings documention
  leds: lp5523: Fix various formatting issues in the code
  leds: lp55xx: Fix file permissions to use DEVICE_ATTR macros
  ...

A VF's mailbox mutex is not getting initialized by nicvf_probe() until after
it is first used. And such usage is resulting in...

[   28.270927] ------------[ cut here ]------------
[   28.270934] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
[   28.270980] WARNING: CPU: 9 PID: 675 at kernel/locking/mutex.c:938 __mutex_lock+0xdac/0x12f0
[   28.270985] Modules linked in: ast(+) nicvf(+) i2c_algo_bit drm_vram_helper drm_ttm_helper ttm nicpf(+) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm ixgbe(+) sg thunder_bgx mdio i2c_thunderx mdio_thunder thunder_xcv mdio_cavium dm_mirror dm_region_hash dm_log dm_mod
[   28.271064] CPU: 9 PID: 675 Comm: systemd-udevd Not tainted 4.18.0+ #1
[   28.271070] Hardware name: GIGABYTE R120-T34-00/MT30-GS2-00, BIOS F02 08/06/2019
[   28.271078] pstate: 60000005 (nZCv daif -PAN -UAO)
[   28.271086] pc : __mutex_lock+0xdac/0x12f0
[   28.271092] lr : __mutex_lock+0xdac/0x12f0
[   28.271097] sp : ffff800d42146fb0
[   28.271103] x29: ffff800d42146fb0 x28: 0000000000000000
[   28.271113] x27: ffff800d24361180 x26: dfff200000000000
[   28.271122] x25: 0000000000000000 x24: 0000000000000002
[   28.271132] x23: ffff20001597cc80 x22: ffff2000139e9848
[   28.271141] x21: 0000000000000000 x20: 1ffff001a8428e0c
[   28.271151] x19: ffff200015d5d000 x18: 1ffff001ae0f2184
[   28.271160] x17: 0000000000000000 x16: 0000000000000000
[   28.271170] x15: ffff800d70790c38 x14: ffff20001597c000
[   28.271179] x13: ffff20001597cc80 x12: ffff040002b2f779
[   28.271189] x11: 1fffe40002b2f778 x10: ffff040002b2f778
[   28.271199] x9 : 0000000000000000 x8 : 00000000f1f1f1f1
[   28.271208] x7 : 00000000f2f2f2f2 x6 : 0000000000000000
[   28.271217] x5 : 1ffff001ae0f2186 x4 : 1fffe400027eb03c
[   28.271227] x3 : dfff200000000000 x2 : ffff1001a8428dbe
[   28.271237] x1 : c87fdfac7ea11d00 x0 : 0000000000000000
[   28.271246] Call trace:
[   28.271254]  __mutex_lock+0xdac/0x12f0
[   28.271261]  mutex_lock_nested+0x3c/0x50
[   28.271297]  nicvf_send_msg_to_pf+0x40/0x3a0 [nicvf]
[   28.271316]  nicvf_register_misc_interrupt+0x20c/0x328 [nicvf]
[   28.271334]  nicvf_probe+0x508/0xda0 [nicvf]
[   28.271344]  local_pci_probe+0xc4/0x180
[   28.271352]  pci_device_probe+0x3ec/0x528
[   28.271363]  driver_probe_device+0x21c/0xb98
[   28.271371]  device_driver_attach+0xe8/0x120
[   28.271379]  __driver_attach+0xe0/0x2a0
[   28.271386]  bus_for_each_dev+0x118/0x190
[   28.271394]  driver_attach+0x48/0x60
[   28.271401]  bus_add_driver+0x328/0x558
[   28.271409]  driver_register+0x148/0x398
[   28.271416]  __pci_register_driver+0x14c/0x1b0
[   28.271437]  nicvf_init_module+0x54/0x10000 [nicvf]
[   28.271447]  do_one_initcall+0x18c/0xc18
[   28.271457]  do_init_module+0x18c/0x618
[   28.271464]  load_module+0x2bc0/0x4088
[   28.271472]  __se_sys_finit_module+0x110/0x188
[   28.271479]  __arm64_sys_finit_module+0x70/0xa0
[   28.271490]  el0_svc_handler+0x15c/0x380
[   28.271496]  el0_svc+0x8/0xc
[   28.271502] irq event stamp: 52649
[   28.271513] hardirqs last  enabled at (52649): [<ffff200011b4d790>] _raw_spin_unlock_irqrestore+0xc0/0xd8
[   28.271522] hardirqs last disabled at (52648): [<ffff200011b4d3c4>] _raw_spin_lock_irqsave+0x3c/0xf0
[   28.271530] softirqs last  enabled at (52330): [<ffff200010082af4>] __do_softirq+0xacc/0x117c
[   28.271540] softirqs last disabled at (52313): [<ffff20001019b354>] irq_exit+0x3cc/0x500
[   28.271545] ---[ end trace a9b90324c8a0d4ee ]---

This problem is resolved by moving the call to mutex_init() up earlier
in nicvf_probe().

Fixes: 609ea65c ("net: thunderx: add mutex to protect mailbox from concurrent calls for same VF")
Signed-off-by: Dean Nelson <dnelson@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Oliver Neukum says:

====================
misc bug fixes for the hso driver

1. Code reuse led to an unregistration of a net driver that has not been
registered
2. The kernel complains generically if kmalloc with GFP_KERNEL fails
3. A race that can lead to an URB that is in use being reused or
a use after free
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This check an inherent race. It opens a race where
an error code has already been set or cleared yet
the URB has not been given back. We cannot do
such an optimization and must unlink unconditionally.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If this fails, kmalloc() will print a report including
a stack trace. There is no need for a separate complaint.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver tries to reuse code for disconnect in case
of a failed probe.
If resources need to be freed after an error in probe, the
netdev must not be freed because it has never been registered.
Fix it by telling the helper which path we are in.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a configuration has NUMA disabled and SGI_IP27 enabled, the build
fails:

  CC      kernel/bounds.s
  CC      arch/mips/kernel/asm-offsets.s
In file included from arch/mips/include/asm/topology.h:11,
                 from include/linux/topology.h:36,
                 from include/linux/gfp.h:9,
                 from include/linux/slab.h:15,
                 from include/linux/crypto.h:19,
                 from include/crypto/hash.h:11,
                 from include/linux/uio.h:10,
                 from include/linux/socket.h:8,
                 from include/linux/compat.h:15,
                 from arch/mips/kernel/asm-offsets.c:12:
include/linux/topology.h: In function 'numa_node_id':
arch/mips/include/asm/mach-ip27/topology.h:16:27: error: implicit declaration of function 'cputonasid'; did you mean 'cpu_vpe_id'? [-Werror=implicit-function-declaration]
 #define cpu_to_node(cpu) (cputonasid(cpu))
                           ^~~~~~~~~~
include/linux/topology.h:119:9: note: in expansion of macro 'cpu_to_node'
  return cpu_to_node(raw_smp_processor_id());
         ^~~~~~~~~~~
include/linux/topology.h: In function 'cpu_cpu_mask':
arch/mips/include/asm/mach-ip27/topology.h:19:7: error: implicit declaration of function 'hub_data' [-Werror=implicit-function-declaration]
      &hub_data(node)->h_cpus)
       ^~~~~~~~
include/linux/topology.h:210:9: note: in expansion of macro 'cpumask_of_node'
  return cpumask_of_node(cpu_to_node(cpu));
         ^~~~~~~~~~~~~~~
arch/mips/include/asm/mach-ip27/topology.h:19:21: error: invalid type argument of '->' (have 'int')
      &hub_data(node)->h_cpus)
                     ^~
include/linux/topology.h:210:9: note: in expansion of macro 'cpumask_of_node'
  return cpumask_of_node(cpu_to_node(cpu));
         ^~~~~~~~~~~~~~~

Before switch from discontigmem to sparsemem, there always was
CONFIG_NEED_MULTIPLE_NODES=y because it was selected by DISCONTIGMEM.
Without DISCONTIGMEM it is possible to have SPARSEMEM without NUMA for
SGI_IP27 and as many things there rely on custom node definition, the
build breaks.

As Thomas noted "... there are right now too many places in IP27 code,
which assumes NUMA enabled", the simplest solution would be to always
enable NUMA for SGI-IP27 builds.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 397dc00e ("mips: sgi-ip27: switch from DISCONTIGMEM to SPARSEMEM")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

It don't have enough time for reviewing patches and thus don't
want to be listed as regular LED maintainer. Nonetheless I may still
give a review from time to time.
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

Pull hmm updates from Jason Gunthorpe:
 "Ralph has been working on nouveau's use of hmm_range_fault() and
  migrate_vma() which resulted in this small series. It adds reporting
  of the page table order from hmm_range_fault() and some optimization
  of migrate_vma():

   - Report the size of the page table mapping out of hmm_range_fault().

     This makes it easier to establish a large/huge/etc mapping in the
     device's page table.

   - Allow devices to ignore the invalidations during migration in cases
     where the migration is not going to change pages.

     For instance migrating pages to a device does not require the
     device to invalidate pages already in the device.

   - Update nouveau and hmm_tests to use the above"

* tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  mm/hmm/test: use the new migration invalidation
  nouveau/svm: use the new migration invalidation
  mm/notifier: add migration invalidation type
  mm/migrate: add a flags parameter to migrate_vma
  nouveau: fix storing invalid ptes
  nouveau/hmm: support mapping large sysmem pages
  nouveau: fix mapping 2MB sysmem pages
  nouveau/hmm: fault one page at a time
  mm/hmm: add tests for hmm_pfn_to_map_order()
  mm/hmm: provide the page mapping order in hmm_range_fault()

Pull MMC updates from Ulf Hansson:
 "MMC core:

   - Add a new host cap bit and a corresponding DT property, to support
     power cycling of the card by FW at system suspend/resume.

   - Fix clock rate setting for SDIO in SDR12/SDR25 speed-mode

   - Fix switch to 1/4-bit mode at system suspend/resume for SD-combo
     cards

   - Convert the mmc-pwrseq DT bindings to the json-schema

   - Always allow the card detect uevent to be consumed by userspace

  MMC host controllers:

   - Convert a few DT bindings to the json-schema

   - mtk-sd:
      - Add support for command queue through cqhci
      - Add support for the MT6779 variant

   - renesas_sdhi_internal_dmac:
      - Fix dma unmapping in the error path

   - sdhci_am654:
      - Add support for the AM65x PG2.0 variant
      - Extend support for phys/clocks

   - sdhci-cadence:
      - Drop incorrect HW tuning for SD mode

   - sdhci-msm:
      - Add support for interconnect bandwidth scaling
      - Enable internal voltage control
      - Enable low power state for pinctrls

   - sdhci-of-at91:
      - Ludovic Desroches handovers maintenance to Eugen Hristev

   - sdhci-pci-gli:
      - Improve clock handling for GL975x

   - sdhci-pci-o2micro:
      - Add HW tuning for SDR104 mode
      - Fix support for O2 host controller Seabird1"

* tag 'mmc-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (66 commits)
  mmc: mediatek: make function msdc_cqe_disable() static
  MAINTAINERS: mmc: sdhci-of-at91: handover maintenance to Eugen Hristev
  dt-bindings: mmc: mediatek: Add document for mt6779
  mmc: mediatek: command queue support
  mmc: mediatek: refine msdc timeout api
  mmc: mediatek: add MT6779 MMC driver support
  mmc: sdhci-pci-o2micro: Add HW tuning for SDR104 mode
  mmc: sdhci-pci-o2micro: Bug fix for O2 host controller Seabird1
  mmc: via-sdmmc: use generic power management
  memstick: jmb38x_ms: use generic power management
  mmc: sdhci-cadence: do not use hardware tuning for SD mode
  mmc: sdhci-pci-gli: Set SDR104's clock to 205MHz and enable SSC for GL975x
  mmc: cqhci: Fix a print format for the task descriptor
  mmc: sdhci-of-arasan: fix timings allocation code
  mmc: sdhci: Fix a potential uninitialized variable
  dt-bindings: mmc: renesas,sdhi: convert to YAML
  dt-bindings: mmc: convert arasan sdhci bindings to yaml
  mmc: sdhci: Fix potential null pointer access while accessing vqmmc
  mmc: core: Add MMC_CAP2_FULL_PWR_CYCLE_IN_SUSPEND
  dt-bindings: mmc: Add full-pwr-cycle-in-suspend property
  ...

Pull hwmon updates from Guenter Roeck:
 "Highlights:
   - New driver for Sparx5 SoC temperature sensot
   - New driver for Corsair Commander Pro
   - MAX20710 support added to max20730 driver

  Enhancements:
   - max6697: Allow max6581 to create tempX_offset attributes
   - gsc (Gateworks System Controller): add 16bit pre-scaled voltage mode
   - adm1275: Enable adm1278 ADM1278_TEMP1_EN
   - dell-smm: Add Latitude 5480 to fan control whitelist

  Fixes:
   - adc128d818: Fix advanced configuration register init
   - pmbus/core: Use s64 instead of long for calculations to fix
     overflow issues with 32-bit architectures

  Plus various cleanups in several drivers"

* tag 'hwmon-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (32 commits)
  hwmon: (adc128d818) Fix advanced configuration register init
  hwmon: (axi-fan-control) remove duplicate macros
  hwmon: (i5k_amb, vt8231) Drop uses of pci_read_config_*() return value
  hwmon: (sparx5) Make symbol 's5_temp_match' static
  hwmon: (corsair-cpro) add reading pwm values
  hwmon: sparx5: Add Sparx5 SoC temperature driver
  dt-bindings: hwmon: Add Sparx5 temperature sensor
  hwmon: (tmp401) Replace HTTP links with HTTPS ones
  hwmon: (lm95234) Replace HTTP links with HTTPS ones
  hwmon: (lm90) Replace HTTP links with HTTPS ones
  hwmon: (k8temp) Replace HTTP links with HTTPS ones
  hwmon: (jc42) Replace HTTP links with HTTPS ones
  hwmon: (ina2xx) Replace HTTP links with HTTPS ones
  hwmon: (ina209) Replace HTTP links with HTTPS ones
  hwmon: Replace HTTP links with HTTPS ones
  docs: hwmon: Replace HTTP links with HTTPS ones
  hwmon: (adm1025) Replace HTTP links with HTTPS ones
  hwmon: add Corsair Commander Pro driver
  hwmon: (max6697) Allow max6581 to create tempX_offset
  hwmon: (tmmp513) Replace HTTP links with HTTPS links
  ...

Pull Devicetree updates from Rob Herring:

 - Improve device links cycle detection and breaking. Add more bindings
   for device link dependencies.

 - Refactor parsing 'no-map' in __reserved_mem_alloc_size()

 - Improve DT unittest 'ranges' and 'dma-ranges' test case to check
   differing cell sizes

 - Various http to https link conversions

 - Add a schema check to prevent 'syscon' from being used by itself
   without a more specific compatible

 - A bunch more DT binding conversions to schema

* tag 'devicetree-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits)
  of: reserved-memory: remove duplicated call to of_get_flat_dt_prop() for no-map node
  of: unittest: Use bigger address cells to catch parser regressions
  dt-bindings: memory-controllers: Convert mmdc to json-schema
  dt-bindings: mtd: Convert imx nand to json-schema
  dt-bindings: mtd: Convert gpmi nand to json-schema
  dt-bindings: iio: io-channel-mux: Fix compatible string in example code
  of: property: Add device link support for pinctrl-0 through pinctrl-8
  of: property: Add device link support for multiple DT bindings
  dt-bindings: phy: ti: phy-gmii-sel: convert bindings to json-schema
  dt-bindings: mux: mux.h: drop a duplicated word
  dt-bindings: misc: Convert olpc,xo1.75-ec to json-schema
  dt-bindings: aspeed-lpc: Replace HTTP links with HTTPS ones
  dt-bindings: drm/bridge: Replace HTTP links with HTTPS ones
  drm/tilcdc: Replace HTTP links with HTTPS ones
  dt-bindings: iommu: renesas,ipmmu-vmsa: Add r8a774e1 support
  dt-bindings: fpga: Replace HTTP links with HTTPS ones
  dt-bindings: virtio: Replace HTTP links with HTTPS ones
  dt-bindings: media: imx274: Add optional input clock and supplies
  dt-bindings: i2c-gpio: Use 'deprecated' keyword on deprecated properties
  dt-bindings: interrupt-controller: Fix typos in loongson,liointc.yaml
  ...

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v5.9 kernel cycle.

  There is nothing too exciting in it, but a new macro that fixes a
  build failure on a minor ARM32 platform that appeared yesterday is
  part of it so we better merge it.

  Core changes:

   - Introduce the for_each_requested_gpio() macro to help in dependent
     code all over the place. Also patch a few locations to use it while
     we are at it.

   - Split out the sysfs code into its own file.

   - Split out the character device code into its own file, then make a
     set of refactorings and improvements to this code. We are setting
     the stage to revamp the userspace API a bit in the next cycle.

   - Fix a whole slew of kerneldoc that was wrong or missing.

  New drivers:

   - The PCA953x driver now supports the PCAL9535.

  Driver improvements:

   - A host of incremental modernizations and improvements to the
     PCA953x driver.

   - Incremental improvements to the Xilinx Zynq driver.

   - Some improvements to the GPIO aggregator driver.

   - I ran all over the place switching all threaded and other drivers
     requesting their own IRQ while using the core GPIO IRQ helpers to
     pass the GPIO irq chip as a template instead of calling the
     explicit set-up functions. Next merge window we may retire the old
     code altogether"

* tag 'gpio-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (97 commits)
  gpio: wcove: Request IRQ after all initialisation done
  gpio: crystalcove: Free IRQ on error path
  gpio: pca953x: Request IRQ after all initialisation done
  gpio: don't use same lockdep class for all devm_gpiochip_add_data users
  gpio: max732x: Use irqchip template
  gpio: stmpe: Move chip registration
  gpio: rcar: Use irqchip template
  gpio: regmap: fix type clash
  gpio: Correct kernel-doc inconsistency
  gpio: pci-idio-16: Use irqchip template
  gpio: pcie-idio-24: Use irqchip template
  gpio: 104-idio-16: Use irqchip template
  gpio: 104-idi-48: Use irqchip template
  gpio: 104-dio-48e: Use irqchip template
  gpio: ws16c48: Use irqchip template
  gpio: omap: improve coding style for pin config flags
  gpio: dln2: Use irqchip template
  gpio: sch: Add a blank line between declaration and code
  gpio: sch: changed every 'unsigned' to 'unsigned int'
  gpio: ich: changed every 'unsigned' to 'unsigned int'
  ...

This is hopefully the final piece of the crazy puzzle with random.h
dependencies.

And by "hopefully" I obviously mean "Linus is a hopeless optimist".
Reported-and-tested-by: Daniel Díaz <daniel.diaz@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

On architectures defining _HAVE_ARCH_IPV6_CSUM, we get
csum_ipv6_magic() defined by means of arch checksum.h headers. On
other architectures, we actually need to include net/ip6_checksum.h
to be able to use it.

Without this include, building with defconfig breaks at least for
s390.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 4cb47a86 ("tunnels: PMTU discovery support for directly bridged IP packets")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The msg_zerocopy test pins the sender and receiver threads to separate
cores to reduce variance between runs.

But it hardcodes the cores and skips core 0, so it fails on machines
with the selected cores offline, or simply fewer cores.

The test mainly gives code coverage in automated runs. The throughput
of zerocopy ('-z') and non-zerocopy runs is logged for manual
inspection.

Continue even when sched_setaffinity fails. Just log to warn anyone
interpreting the data.

Fixes: 07b65c5b ("test: add msg_zerocopy test")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Nicolas reported the following oops:

[ 1521.392541] BUG: kernel NULL pointer dereference, address: 00000000000000c0
[ 1521.394189] #PF: supervisor read access in kernel mode
[ 1521.395376] #PF: error_code(0x0000) - not-present page
[ 1521.396607] PGD 0 P4D 0
[ 1521.397156] Oops: 0000 [#1] SMP PTI
[ 1521.398020] CPU: 0 PID: 22986 Comm: kworker/0:2 Not tainted 5.8.0-rc4+ #109
[ 1521.399618] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 1521.401728] Workqueue: events mptcp_worker
[ 1521.402651] RIP: 0010:mptcp_subflow_create_socket+0xf1/0x1c0
[ 1521.403954] Code: 24 08 89 44 24 04 48 8b 7a 18 e8 2a 48 d4 ff 8b 44 24 04 85 c0 75 7a 48 8b 8b 78 02 00 00 48 8b 54 24 08 48 8d bb 80 00 00 00 <48> 8b 89 c0 00 00 00 48 89 8a c0 00 00 00 48 8b 8b 78 02 00 00 8b
[ 1521.408201] RSP: 0000:ffffabc4002d3c60 EFLAGS: 00010246
[ 1521.409433] RAX: 0000000000000000 RBX: ffffa0b9ad8c9a00 RCX: 0000000000000000
[ 1521.411096] RDX: ffffa0b9ae78a300 RSI: 00000000fffffe01 RDI: ffffa0b9ad8c9a80
[ 1521.412734] RBP: ffffa0b9adff2e80 R08: ffffa0b9af02d640 R09: ffffa0b9ad923a00
[ 1521.414333] R10: ffffabc4007139f8 R11: fefefefefefefeff R12: ffffabc4002d3cb0
[ 1521.415918] R13: ffffa0b9ad91fa58 R14: ffffa0b9ad8c9f9c R15: 0000000000000000
[ 1521.417592] FS:  0000000000000000(0000) GS:ffffa0b9af000000(0000) knlGS:0000000000000000
[ 1521.419490] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1521.420839] CR2: 00000000000000c0 CR3: 000000002951e006 CR4: 0000000000160ef0
[ 1521.422511] Call Trace:
[ 1521.423103]  __mptcp_subflow_connect+0x94/0x1f0
[ 1521.425376]  mptcp_pm_create_subflow_or_signal_addr+0x200/0x2a0
[ 1521.426736]  mptcp_worker+0x31b/0x390
[ 1521.431324]  process_one_work+0x1fc/0x3f0
[ 1521.432268]  worker_thread+0x2d/0x3b0
[ 1521.434197]  kthread+0x117/0x130
[ 1521.435783]  ret_from_fork+0x22/0x30

on some unconventional configuration.

The MPTCP protocol is trying to create a subflow for an
unaccepted server socket. That is allowed by the RFC, even
if subflow creation will likely fail.
Unaccepted sockets have still a NULL sk_socket field,
avoid the issue by failing earlier.
Reported-and-tested-by: Nicolas Rybowski <nicolas.rybowski@tessares.net>
Fixes: 7d14b0d2 ("mptcp: set correct vfs info for subflows")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Po-Hsu Lin says:

====================
selftests: rtnetlink: Fix for false-negative return values

This patchset will address the false-negative return value issue
caused by the following:
  1. The return value "ret" in this script will be reset to 0 from
     the beginning of each sub-test in rtnetlink.sh, therefore this
     rtnetlink test will always pass if the last sub-test has passed.
  2. The test result from two sub-tests in kci_test_encap() were not
     being processed, thus they will not affect the final test result
     of this test.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

kci_test_encap() is actually composed by two different sub-tests,
kci_test_encap_vxlan() and kci_test_encap_fou()

Therefore we should check the test result of these two in
kci_test_encap() to let the script be aware of the pass / fail status.
Otherwise it will generate false-negative result like below:
    $ sudo ./test.sh
    PASS: policy routing
    PASS: route get
    PASS: preferred_lft addresses have expired
    PASS: promote_secondaries complete
    PASS: tc htb hierarchy
    PASS: gre tunnel endpoint
    PASS: gretap
    PASS: ip6gretap
    PASS: erspan
    PASS: ip6erspan
    PASS: bridge setup
    PASS: ipv6 addrlabel
    PASS: set ifalias 5b193daf-0a08-46d7-af2c-e7aadd422ded for test-dummy0
    PASS: vrf
    PASS: vxlan
    FAIL: can't add fou port 7777, skipping test
    PASS: macsec
    PASS: bridge fdb get
    PASS: neigh get
    $ echo $?
    0
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The return value "ret" will be reset to 0 from the beginning of each
sub-test in rtnetlink.sh, therefore this test will always pass if the
last sub-test has passed:
    $ sudo ./rtnetlink.sh
    PASS: policy routing
    PASS: route get
    PASS: preferred_lft addresses have expired
    PASS: promote_secondaries complete
    PASS: tc htb hierarchy
    PASS: gre tunnel endpoint
    PASS: gretap
    PASS: ip6gretap
    PASS: erspan
    PASS: ip6erspan
    PASS: bridge setup
    PASS: ipv6 addrlabel
    PASS: set ifalias a39ee707-e36b-41d3-802f-63179ed4d580 for test-dummy0
    PASS: vrf
    PASS: vxlan
    FAIL: can't add fou port 7777, skipping test
    PASS: macsec
    PASS: ipsec
    3,7c3,7
    < sa[0]    spi=0x00000009 proto=0x32 salt=0x64636261 crypt=1
    < sa[0]    key=0x31323334 35363738 39303132 33343536
    < sa[1] rx ipaddr=0x00000000 00000000 00000000 c0a87b03
    < sa[1]    spi=0x00000009 proto=0x32 salt=0x64636261 crypt=1
    < sa[1]    key=0x31323334 35363738 39303132 33343536
    ---
    > sa[0]    spi=0x00000009 proto=0x32 salt=0x61626364 crypt=1
    > sa[0]    key=0x34333231 38373635 32313039 36353433
    > sa[1] rx ipaddr=0x00000000 00000000 00000000 037ba8c0
    > sa[1]    spi=0x00000009 proto=0x32 salt=0x61626364 crypt=1
    > sa[1]    key=0x34333231 38373635 32313039 36353433
    FAIL: ipsec_offload incorrect driver data
    FAIL: ipsec_offload
    PASS: bridge fdb get
    PASS: neigh get
    $ echo $?
    0

Make "ret" become a local variable for all sub-tests.
Also, check the sub-test results in kci_test_rtnl() and return the
final result for this test.
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Although we can detect the chip revision 100% at runtime, it is useful
to specify it in the device tree compatible string too, because
otherwise there would be no way to assess the correctness of device tree
bindings statically, without booting a board (only some switch versions
have internal RGMII delays and/or an SGMII port).

But for testing the P/Q/R/S support, what I have is a reworked board
with the SJA1105T replaced by a pin-compatible SJA1105Q, and I don't
want to keep a separate device tree blob just for this one-off board.
Since just the chip has been replaced, its RGMII delay setup is
inherently the same (meaning: delays added by the PHY on the slave
ports, and by PCB traces on the fixed-link CPU port).

For this board, I'd rather have the driver shout at me, but go ahead and
use what it found even if it doesn't match what it's been told is there.

[    2.970826] sja1105 spi0.1: Device tree specifies chip SJA1105T but found SJA1105Q, please fix it!
[    2.980010] sja1105 spi0.1: Probed switch chip: SJA1105Q
[    3.005082] sja1105 spi0.1: Enabled switch tagging
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Xin Long says:

====================
net: fix a mcast issue for tipc udp media

Patch 1 is to add a function to get the dev by source address,
which will be used by Patch 2.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Without ub->ifindex set for ipv6 address in tipc_udp_enable(),
ipv6_sock_mc_join() may make the wrong dev join the multicast
address in enable_mcast(). This causes that tipc links would
never be created.

So fix it by getting the right netdev and setting ub->ifindex,
as it does for ipv4 address.
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>