- 31 Oct, 2016 40 commits
-
-
Jacob Keller authored
commit 776b2e15 upstream. X722 hardware requires using the admin queue to configure RSS. This function was previously re-written in commit e69ff813 ("i40e: rework the functions to configure RSS with similar parameters"). However, the previous refactor did not work correctly for a few reasons (a) it does not check whether seed is NULL before using it, resulting in a NULL pointer dereference [ 402.954721] BUG: unable to handle kernel NULL pointer dereference at (null) [ 402.955568] IP: [<ffffffffa0090ccf>] i40e_config_rss_aq.constprop.65+0x2f/0x1c0 [i40e] [ 402.956402] PGD ad610067 PUD accc0067 PMD 0 [ 402.957235] Oops: 0000 [#1] SMP [ 402.958064] Modules linked in: ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_filter ebtable_ broute bridge stp llc ebtable_nat ebtables ip6table_mangle ip6table_raw ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv 6 ip6table_security ip6table_filter ip6_tables iptable_mangle iptable_raw iptable_nat nf_conntrack_ipv4_ nf_defrag_ipv4_ nf_nat_ip v4_ nf_nat nf_conntrack iptable_security intel_rapl i86_kg_temp_thermal coretemp kvm_intel kvm irqbypass crct10dif_clMl crc32_ pclMl ghash_clMlni_intel iTCO_wdt iTCO_vendor_support shpchp sb_edac dcdbas pcspkr joydev ipmi_devintf wmi edac_core ipmi_ssif acpi_ad acpi_ower_meter ipmi_si ipmi_msghandler mei_me nfsd lpc_ich mei ioatdma tpm_tis auth_rpcgss tpm nfs_acl lockd grace s unrpc ifs nngag200 i2c_algo_bit drm_kms_helper ttm drm iigbe bnx2x i40e dca mdio ptp pps_core libcrc32c fjes crc32c_intel [ 402.965563] CPU: 22 PID: 2461 Conm: ethtool Not tainted 4.6.0-rc7_1.2-ABNidQ+ #20 [ 402.966719] Hardware name: Dell Inc. PowerEdge R720/0C4Y3R, BIOS 2.5.2 01/28/2015 [ 402.967862] task: ffff880219b51dc0 ti: ffff8800b3408000 task.ti: ffff8800b3408000 [ 402.969046] RIP: 0010:[<ffffffffa0090ccf>] [<ffffffffa0090ccf>] i40e_config_rss_aq.constprop.65+0x2f/0x1c0 [i40e] [ 402.970339] RSP: 0018:ffff8800b340ba90 EFLAGS: 00010246 [ 402.971616] RAX: 0000000000000000 RBX: ffff88042ec14000 RCX: 0000000000000200 [ 402.972961] RDX: ffff880428eb9200 RSI: 0000000000000000 RDI: ffff88042ec14000 [ 402.974312] RBP: ffff8800b340baf8 R08: ffff880237ada8f0 R09: ffff880428eb9200 [ 402.975709] R10: ffff880428eb9200 R11: 0000000000000000 R12: ffff88042ec2e000 [ 402.977104] R13: ffff88042ec2e000 R14: ffff88042ec14000 R15: ffff88022ea00800 [ 402.978541] FS: 00007f84fd054700(0000) GS:ffff880237ac0000(0000) knlGS:0000000000000000 [ 402.980003] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 402.981508] CR2: 0000000000000000 CR3: 000000003289e000 CR4: 00000000000406e0 [ 402.983028] Stack: [ 402.984578] 0000000002000200 0000000000000000 ffff88023ffeda68 ffff88023ffef000 [ 402.986187] 0000000000000268 ffff8800b340bbf8 ffff88023ffedd80 0000000088ce4f1d [ 402.987844] ffff88042ec14000 ffff88022ea00800 ffff88042ec2e000 ffff88042ec14000 [ 402.989509] Call Trace: [ 402.991200] [<ffffffffa009636f>] i40e_config_rss+0x11f/0x1c0 [i40e] [ 402.992924] [<ffffffffa00a1ae0>] i40e_set_rifh+0ic0/0x130 [i40e] [ 402.994684] [<ffffffff816d54b7>] ethtool_set_rifh+0x1f7/0x300 [ 402.996446] [<ffffffff8136d02b>] ? cred_has_capability+0io6b/0x100 [ 402.998203] [<ffffffff8136d102>] ? selinux_capable+0x12/0x20 [ 402.999968] [<ffffffff8136277b>] ? security_capable+0x4b/0x70 [ 403.001707] [<ffffffff816d6da3>] dev_ethtool+0x1423/0x2290 [ 403.003461] [<ffffffff816eab41>] dev_ioctl+0x191/0io630 [ 403.005186] [<ffffffff811cf80a>] ? lru_cache_add+0x3a/0i80 [ 403.006942] [<ffffffff817f2a8e>] ? _raw_spin_unlock+0ie/0x20 [ 403.008691] [<ffffffff816adb95>] sock_do_ioctl+0x45/0i50 [ 403.010421] [<ffffffff816ae229>] sock_ioctl+0x209/0x2d0 [ 403.012173] [<ffffffff81262194>] do_vfs_ioctl+0u4/0io6c0 [ 403.013911] [<ffffffff81262829>] SyS_ioctl+0x79/0x90 [ 403.015710] [<ffffffff817f2e72>] entry_SYSCALL_64_fastpath+0x1a/0u4 [ 403.017500] Code: 90 55 48 89 e5 41 57 41 56 41 55 41 54 53 48 89 fb 48 83 ec 40 4c 8b a7 e0 05 00 00 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 <48> 8b 06 41 0f b7 bc 24 f2 0f 00 00 48 89 45 9c 48 8b 46 08 48 [ 403.021454] RIP [<ffffffffa0090ccf>] i40e_config_rss_aq.constprop.65+0x2f/0x1c0 [i40e] [ 403.023395] RSP <ffff8800b340ba90> [ 403.025271] CR2: 0000000000000000 [ 403.027169] ---[ end trace 64561b528cf61cf0 ]--- (b) it does not even bother to use the passed in *lut parameter which defines the requested lookup table. Instead it uses its own round robin table. Fix these issues by re-writing it to be similar to i40e_config_rss_reg and i40e_get_rss_aq. Fixes: e69ff813 ("i40e: rework the functions to configure RSS with similar parameters", 2015-10-21) Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter authored
commit be0cb0a6 upstream. We shifted the locking around a bit but forgot to delete this unlock so now it can unlock twice. Fixes: cd3be169 ('i40e: Move the mutex lock in i40e_client_unregister') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Tested-by:
-
Wei Yongjun authored
commit 6999aeab upstream. The call sequence spi_alloc_master/spi_register_master/spi_unregister_master is complete; it reduces the device reference count to zero, which and results in device memory being freed. The subsequent call to spi_master_put is unnecessary and results in an access to free memory. Drop it. Fixes: 9298bc72 ("spi: spi-fsl-dspi: Remove spi-bitbang") Signed-off-by:
Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Uwe Kleine-König authored
commit fcff0381 upstream. This fixes [ 0.000000] i.MX clk 82: register failed with -17 because the name is duplicated. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: 3713e3f5 ("clk: imx35: define two clocks for rtc") Acked-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Jan Viktorin authored
commit 4d31a258 upstream. The variable i contains a total number of resources (including IORESOURCE_IRQ). However, we want the dmem_region_start to point after the last resource of type IORESOURCE_MEM. The original behaviour leads (very likely) to skipping several UIO mapping regions and makes them useless. Fix this by computing dmem_region_start from the uiomem which points to the last used UIO mapping. Fixes: 0a0c3b5a ("Add new uio device for dynamic memory allocation") Signed-off-by:
Jan Viktorin <viktorin@rehivetech.com> Signed-off-by:
-
Suzuki K Poulose authored
commit 481e46fe upstream. commit de546197 ("coresight: tmc: allocating memory when needed") removed the static allocation of buffer for the trace data in ETR mode in tmc_probe. However it failed to remove the "devm_free_coherent" in tmc_probe when the probe fails due to other reasons. This patch gets rid of the incorrect dma_free_coherent() call. Fixes: commit de546197 ("coresight: tmc: allocating memory when needed") Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
-
Sebastian Frias authored
commit ee26c013 upstream. Without this patch irq_domain_disassociate() cannot properly release the interrupt. In fact, irq_map_generic_chip() checks a bit on 'gc->installed' but said bit is never cleared, only set. Commit 088f40b7 ("genirq: Generic chip: Add linear irq domain support") added irq_map_generic_chip() function and also stated "This lacks a removal function for now". This commit provides an implementation of an unmap function that can be called by irq_domain_disassociate(). [ tglx: Made the function static and removed the export as we have neither a prototype nor a modular user. ] Fixes: 088f40b7 ("genirq: Generic chip: Add linear irq domain support") Signed-off-by:
Sebastian Frias <sf84@laposte.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Mason <slash.tmp@free.fr> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/579F5C5A.2070507@laposte.netSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Uma Krishnan authored
commit babf985d upstream. Commit 704c4b0d ("cxlflash: Shutdown notify support for CXL Flash cards") was recently introduced to notify the AFU when a system is going down. Due to the position of the cxlflash driver in the device stack, cxlflash devices are _always_ removed during a reboot/shutdown. This can lead to a crash if the cxlflash shutdown hook is invoked _after_ the shutdown hook for the owning virtual PHB. Furthermore, the current implementation of shutdown/remove hooks for cxlflash are not tolerant to being invoked when the device is not enabled. This can also lead to a crash in situations where the remove hook is invoked after the device has been removed via the vPHBs shutdown hook. An example of this scenario would be an EEH reset failure while a reboot/shutdown is in progress. To solve both problems, the shutdown hook for cxlflash is updated to simply remove the device. This path already includes the AFU notification and thus this solution will continue to perform the original intent. At the same time, the remove hook is updated to protect against being called when the device is not enabled. Fixes: 704c4b0d ("cxlflash: Shutdown notify support for CXL Flash cards") Signed-off-by:
Uma Krishnan <ukrishn@linux.vnet.ibm.com> Acked-by:
Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Christophe Jaillet authored
commit 410280ba upstream. We know that 'retval = 0' because it has been tested a few lines above. So, if 'devm_kmalloc' fails, 0 will be returned instead of an error code. Return -ENOMEM instead. Fixes: 8b4c0009 ("rt2x00usb: Use usb anchor to manage URB") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Jan Kara authored
commit 07393101 upstream. When file permissions are modified via chmod(2) and the user is not in the owning group or capable of CAP_FSETID, the setgid bit is cleared in inode_change_ok(). Setting a POSIX ACL via setxattr(2) sets the file permissions as well as the new ACL, but doesn't clear the setgid bit in a similar way; this allows to bypass the check in chmod(2). Fix that. References: CVE-2016-7097 Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by:
Juerg Haefliger <juerg.haefliger@hpe.com> Signed-off-by:
-
Chris Wilson authored
commit ca5732c5 upstream. We use obj->phys_handle to choose the pread/pwrite path, but as obj->phys_handle is a union with obj->userptr, we then mistakenly use the phys_handle path for userptr objects within pread/pwrite. Testcase: igt/gem_userptr_blits/forbidden-operations Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97519Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161003124516.12388-2-chris@chris-wilson.co.uk (cherry picked from commit 5f12b80a) Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Chris Wilson authored
commit f856f847 upstream. When we enable the per-register access mmiodebug, it is to detect which access is illegal. Reporting on earlier untraced access outside of the mmiodebug does not help debugging (as the suspicion is immediately put upon the current register which is not at fault)! References: https://bugs.freedesktop.org/show_bug.cgi?id=97985Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161003124516.12388-1-chris@chris-wilson.co.uk (cherry picked from commit dda96033) Signed-off-by:
-
Ville Syrjälä authored
commit 16c83fad upstream. Allow returning "connected" or "unknown" connector status for DP branch devices that don't have an EDID. Currently we'd claim the thing as "disconnected" if there is no EDID. This stuff used to broken already, I think, but it got more broken by commit f21a2198 ("drm/i915: Splitting intel_dp_detect") Cc: Damien Cassou <damien@cassou.me> Cc: freedesktop.org@gp.mailgun.org Cc: Arno <blouin.arno@gmail.com> Cc: Shubhangi Shrivastava <shubhangi.shrivastava@intel.com> Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com> Tested-by:
Arno <blouin.arno@gmail.com> Fixes: f21a2198 ("drm/i915: Splitting intel_dp_detect") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83348Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1475481316-8194-2-git-send-email-ville.syrjala@linux.intel.comReviewed-by:
Ander Conselvan de Oliveira <conselvan2@gmail.com> (cherry picked from commit 5cb651a7) Signed-off-by:
-
Ville Syrjälä authored
commit 10158116 upstream. We can't rely on connector->status in the detect() hook if the long hpd was already handled by the dig_port_work as that won't update connector->status. Thus we have to defer the long hpd handling entirely until the hotplug work runs to avoid the double long hpd handling the "detect_done" flag is trying to prevent. We'll start to depend on connector->status being up to date in a following patch. Cc: Damien Cassou <damien@cassou.me> Cc: freedesktop.org@gp.mailgun.org Cc: Arno <blouin.arno@gmail.com> Cc: Shubhangi Shrivastava <shubhangi.shrivastava@intel.com> Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com> Tested-by:
-
Ville Syrjälä authored
commit a3fd4c67 upstream. DPLL_SDVO_HIGH_SPEED must be set for SDVO/HDMI/DP, but nowhere is it forbidden to set it for LVDS/CRT as well. So let's also set it on CRT to make it possible to share the DPLL between HDMI and CRT. What that bit apparently does is enable the x5 clock to the port, which then pumps out the bits on both edges of the clock. The DAC doesn't need that clock since it's not pumping out bits, but I don't think it hurts to have the DPLL output that clock anyway. This is fairly important on IVB since it has only two DPLLs with three pipes. So trying to drive three or more PCH ports with three pipes is only possible when at least one of the DPLLs gets shared between two of the pipes. SNB doesn't really need to do this since it has only two pipes. It could be done to avoid enabling the second DPLL at all in certain cases, but I'm not sure that's such a huge win. So let's not do it for SNB, at least for now. On ILK it never makes sense as the DPLLs can't be shared. v2: Just always enable the high speed clock to keep things simple (Daniel) Beef up the commit message a bit (Daniel) Cc: Nick Yamane <nick.diego@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by:
Nick Yamane <nick.diego@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97204Signed-off-by:
-
Lyude authored
commit 05a76d3d upstream. If we're enabling a pipe, we'll need to modify the watermarks on all active planes. Since those planes won't be added to the state on their own, we need to add them ourselves. Signed-off-by:
Lyude <cpaul@redhat.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471463761-26796-6-git-send-email-cpaul@redhat.comSigned-off-by:
-
Ville Syrjälä authored
commit d721b02f upstream. Looks like the TSEG lives just above TOUD, stolen comes after TSEG. The spec seems somewhat self-contradictory in places, in the ESMRAMC register desctription it says: TSEG Size: 10=(TOUD + 512 KB) to TOUD 11 =(TOUD + 1 MB) to TOUD so that agrees with TSEG being at TOUD. But the example given elsehwere in the spec says: TOUD equals 62.5 MB = 03E7FFFFh TSEG selected as 512 KB in size, Graphics local memory selected as 1 MB in size General System RAM available in system = 62.5 MB General system RAM range00000000h to 03E7FFFFh TSEG address range03F80000h to 03FFFFFFh TSEG pre-allocated from03F80000h to 03FFFFFFh Graphics local memory pre-allocated from03E80000h to 03F7FFFFh so here we have TSEG above stolen. Real world evidence agrees with the TOUD->TSEG->stolen order however, so let's fix up the code to account for the TSEG size. Cc: Taketo Kabe <fdporg@vega.pgw.jp> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Fixes: 0ad98c74 ("drm/i915: Determine the stolen memory base address on gen2") Fixes: a4dff769 ("x86/gpu: Add Intel graphics stolen memory quirk for gen2 platforms") Reported-by:
Taketo Kabe <fdporg@vega.pgw.jp> Tested-by:
-
David Weinehall authored
commit 23f889bd upstream. This reverts commit 237ed86c. Our current implementation of live status check (repeat 9 times with 10ms delays between each attempt as a workaround for buggy displays) imposes a rather serious penalty, time wise, on intel_hdmi_detect(). Since we we already skip live status checks on platforms before gen 7, and since we seem to have coped quite well before the live status check was introduced for newer platforms too, the previous behaviour is probably preferable, at least unless someone can point to a use-case that the live status check improves (apart from "Bspec says so".) Signed-off-by:
David Weinehall <david.weinehall@linux.intel.com> Fixes: 237ed86c ("drm/i915: Check live status before reading edid") Fixes: f8d03ea0 ("drm/i915: increase the tries for HDMI hotplug live status checking") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97139 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94014Acked-by:
-
Paulo Zanoni authored
commit 17777d61 upstream. According to BSpec, it's the "core CPUs" that need the code, which means SKL and KBL, but not BXT. I don't have a KBL to test this patch on it. v2: Only SKL should have I915_SAGV_NOT_CONTROLLED. Reviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1474578035-424-4-git-send-email-paulo.r.zanoni@intel.com (cherry picked from commit 6e3100ec) Signed-off-by:
-
Paulo Zanoni authored
commit 6e7fdb87 upstream. And use it to move knowledge about the SAGV-supporting platforms from the callers to the SAGV code. We'll add more platforms to intel_has_sagv(), so IMHO it makes more sense to move all this to a single function instead of patching all the callers every time we add SAGV support to a new platform. v2: Move I915_SAGV_NOT_CONTROLLED to the new function (Lyude). Reviewed-by:
-
Paulo Zanoni authored
commit 674f823b upstream. The plan is to introduce intel_has_sagv() and then use it to discover which platforms actually support it. I thought about keeping the functions with their current skl names, but found two problems: (i) skl_has_sagv() would become a very confusing name, and (ii) intel_atomic_commit_tail() doesn't seem to be calling any functions whose name start with a platform name, so the "intel_" naming scheme seems make more sense than the "firstplatorm_" naming scheme here. Reviewed-by:
-
Paulo Zanoni authored
commit 73fed0ef upstream. We forgot the "res_blocks += y_tile_minimum" that's described on step V of our documentation. Again, this should only affect the Y tiling cases. It looks like the relevant code was introduced in 0fda6568, but there's always the possibility that it matched our specification when it was introduced, and then the specification changed while the code stayed the same. So we can't really say this was a regression, but let's try to add a "Fixes" tag anyway to help backporting. v2: Try to add a "Fixes" tag (Maarten). Fixes: 0fda6568 ("drm/i915/skl: Update watermarks for Y tiling") Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
-
Paulo Zanoni authored
commit cf6c525a upstream. The confusing thing is that plane_blocks_per_line is listed as part of the method 2 calculation but is also used for other things. We calculated it in two different places and different ways: one inside skl_wm_method2() and the other inside skl_compute_plane_wm(). The skl_wm_method2() implementation is the one that matches the specification. With this patch we fix the skl_compute_plane_wm() calculation and just pass it as a parameter to skl_wm_method2(). We also take care to not modify the value of plane_bytes_per_line since we're going to rely on it having a correct value in later patches. This should affect the watermarks for Linear and Y-tiled. From my analysis, it looks like the two plane_blocks_per_line variables got out of sync on 0fda6568, but we can't really say that commit was a regression, it looks like just an incomplete fix. There's always the possibility that 0fda6568 matched our specification at that time, and then later the specification changed. v2: Try to add a "Fixes" tag (Maarten). Fixes: 0fda6568 ("drm/i915/skl: Update watermarks for Y tiling") Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
-
Paulo Zanoni authored
commit ccc10574 upstream. During watermarks calculations, this value is used in 3 different places. Only one of them was not using a hardcoded 4. Move the code up so everybody can benefit from the actual value. This should only help on situations with Y tiling + 90/270 rotation + 1 or 2 bpp or NV12. Reviewed-by:
-
Paulo Zanoni authored
commit 4e4d3814 upstream. Bspec says: "The mailbox response data may not account for memory read latency. If the mailbox response data for level 0 is 0us, add 2 microseconds to the result for each valid level." This means we should only do the +2 in case wm[0] == 0, not always. So split the sanitizing implementation from the WA implementation and fix the WA implementation. v2: Add Fixes tag (Maarten). Fixes: 367294be ("drm/i915/gen9: Add 2us read latency to WM level") Cc: Vandana Kannan <vandana.kannan@intel.com> Reviewed-by:
-
Paulo Zanoni authored
commit be5c571b upstream. We were previously adding all the planes owned by the CRTC even when the ddb partitioning didn't change for them. As a consequence, a lot of functions were being called when we were just moving the cursor around the screen, such as skylake_update_primary_plane(). This was causing flickering on the primary plane when moving the cursor. I'm not 100% sure which operation caused the flickering, but we were writing to a lot of registers, so it could be any of these writes. With this patch, just moving the mouse won't add the primary plane to the commit since it won't trigger a change in DDB partitioning. v2: Use skl_ddb_entry_equal() (Lyude). v3: Change Reported-and-bisected-by: to Reported-by: for checkpatch Fixes: 05a76d3d ("drm/i915/skl: Ensure pipes with changed wms get added to the state") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97888 Cc: Mike Lothian <mike@fireburn.co.uk> Reported-by:
Mike Lothian <mike@fireburn.co.uk> Signed-off-by:
-
Lyude authored
commit ccebc23b upstream. i915 sometimes needs to disable planes in the middle of an atomic commit, and then reenable them later in the same commit. Because of this, we can't make the assumption that the state of the plane actually changed. Since the state of the plane hasn't actually changed, neither have it's watermarks. And if the watermarks hasn't changed then we haven't populated skl_results with anything, which means we'll end up zeroing out a plane's watermarks in the middle of the atomic commit without restoring them later. Simple reproduction recipe: - Get a SKL laptop, launch any kind of X session - Get two extra monitors - Keep hotplugging both displays (so that the display configuration jumps from 1 active pipe to 3 active pipes and back) - Eventually underrun Changes since v1: - Fix incorrect use of "it's" Changes since v2: - Add reproduction recipe Signed-off-by:
-
Lyude authored
commit 27082493 upstream. Now that we can hook into update_crtcs and control the order in which we update CRTCs at each modeset, we can finish the final step of fixing Skylake's watermark handling by performing DDB updates at the same time as plane updates and watermark updates. The first major change in this patch is skl_update_crtcs(), which handles ensuring that we order each CRTC update in our atomic commits properly so that they honor the DDB flush order. The second major change in this patch is the order in which we flush the pipes. While the previous order may have worked, it can't be used in this approach since it no longer will do the right thing. For example, using the old ddb flush order: We have pipes A, B, and C enabled, and we're disabling C. Initial ddb allocation looks like this: | A | B |xxxxxxx| Since we're performing the ddb updates after performing any CRTC disablements in intel_atomic_commit_tail(), the space to the right of pipe B is unallocated. 1. Flush pipes with new allocation contained into old space. None apply, so we skip this 2. Flush pipes having their allocation reduced, but overlapping with a previous allocation. None apply, so we also skip this 3. Flush pipes that got more space allocated. This applies to A and B, giving us the following update order: A, B This is wrong, since updating pipe A first will cause it to overlap with B and potentially burst into flames. Our new order (see the code comments for details) would update the pipes in the proper order: B, A. As well, we calculate the order for each DDB update during the check phase, and reference it later in the commit phase when we hit skl_update_crtcs(). This long overdue patch fixes the rest of the underruns on Skylake. Changes since v1: - Add skl_ddb_entry_write() for cursor into skl_write_cursor_wm() Changes since v2: - Use the method for updating CRTCs that Ville suggested - In skl_update_wm(), only copy the watermarks for the crtc that was passed to us Changes since v3: - Small comment fix in skl_ddb_allocation_overlaps() Changes since v4: - Remove the second loop in intel_update_crtcs() and use Ville's suggestion for updating the ddb allocations in the right order - Get rid of the second loop and just use the ddb state as it updates to determine what order to update everything in (thanks for the suggestion Ville) - Simplify skl_ddb_allocation_overlaps() - Split actual overlap checking into it's own helper Fixes: 0e8fb7ba ("drm/i915/skl: Flush the WM configuration") Fixes: 8211bd5b ("drm/i915/skl: Program the DDB allocation") [omitting CC for stable, since this patch will need to be changed for such backports first] Testcase: kms_cursor_legacy Testcase: plane-all-modeset-transition Signed-off-by:
-
Lyude authored
commit 896e5bb0 upstream. Since we have to write ddb allocations at the same time as we do other plane updates, we're going to need to be able to control the order in which we execute modesets on each pipe. The easiest way to do this is to just factor this section of intel_atomic_commit_tail() (intel_atomic_commit() for stable branches) into it's own function, and add an appropriate display function hook for it. Based off of Matt Rope's suggestions Changes since v1: - Drop pipe_config->base.active check in intel_update_crtcs() since we check that before calling the function Signed-off-by:
-
Lyude authored
commit 62e0fb88 upstream. Thanks to Ville for suggesting this as a potential solution to pipe underruns on Skylake. On Skylake all of the registers for configuring planes, including the registers for configuring their watermarks, are double buffered. New values written to them won't take effect until said registers are "armed", which is done by writing to the PLANE_SURF (or in the case of cursor planes, the CURBASE register) register. With this in mind, up until now we've been updating watermarks on skl like this: non-modeset { - calculate (during atomic check phase) - finish_atomic_commit: - intel_pre_plane_update: - intel_update_watermarks() - {vblank happens; new watermarks + old plane values => underrun } - drm_atomic_helper_commit_planes_on_crtc: - start vblank evasion - write new plane registers - end vblank evasion } or modeset { - calculate (during atomic check phase) - finish_atomic_commit: - crtc_enable: - intel_update_watermarks() - {vblank happens; new watermarks + old plane values => underrun } - drm_atomic_helper_commit_planes_on_crtc: - start vblank evasion - write new plane registers - end vblank evasion } Now we update watermarks atomically like this: non-modeset { - calculate (during atomic check phase) - finish_atomic_commit: - intel_pre_plane_update: - intel_update_watermarks() (wm values aren't written yet) - drm_atomic_helper_commit_planes_on_crtc: - start vblank evasion - write new plane registers - write new wm values - end vblank evasion } modeset { - calculate (during atomic check phase) - finish_atomic_commit: - crtc_enable: - intel_update_watermarks() (actual wm values aren't written yet) - drm_atomic_helper_commit_planes_on_crtc: - start vblank evasion - write new plane registers - write new wm values - end vblank evasion } So this patch moves all of the watermark writes into the right place; inside of the vblank evasion where we update all of the registers for each plane. While this patch doesn't fix everything, it does allow us to update the watermark values in the way the hardware expects us to. Changes since original patch series: - Remove mutex_lock/mutex_unlock since they don't do anything and we're not touching global state - Move skl_write_cursor_wm/skl_write_plane_wm functions into intel_pm.c, make externally visible - Add skl_write_plane_wm calls to skl_update_plane - Fix conditional for for loop in skl_write_plane_wm (level < max_level should be level <= max_level) - Make diagram in commit more accurate to what's actually happening - Add Fixes: Changes since v1: - Use IS_GEN9() instead of IS_SKYLAKE() since these fixes apply to more then just Skylake - Update description to make it clear this patch doesn't fix everything - Check if pipes were actually changed before writing watermarks Changes since v2: - Write PIPE_WM_LINETIME during vblank evasion Changes since v3: - Rebase against new SAGV patch changes Changes since v4: - Add a parameter to choose what skl_wm_values struct to use when writing new plane watermarks Changes since v5: - Remove cursor ddb entry write in skl_write_cursor_wm(), defer until patch 6 - Write WM_LINETIME in intel_begin_crtc_commit() Changes since v6: - Remove redundant dirty_pipes check in skl_write_plane_wm (we check this in all places where we call this function, and it was supposed to have been removed earlier anyway) - In i9xx_update_cursor(), use dev_priv->info.gen >= 9 instead of IS_GEN9(dev_priv). We do this everywhere else and I'd imagine this needs to be done for gen10 as well Changes since v7: - Fix rebase fail (unused variable obj) - Make struct skl_wm_values *wm const - Fix indenting - Use INTEL_GEN() instead of dev_priv->info.gen Changes since v8: - Don't forget calls to skl_write_plane_wm() when disabling planes - Use INTEL_GEN(), not INTEL_INFO()->gen in intel_begin_crtc_commit() Fixes: 2d41c0b5 ("drm/i915/skl: SKL Watermark Computation") Signed-off-by:
-
Steinar H. Gunderson authored
commit 4973ca9a upstream. The Akai MIDImix (09e8:0031) is a MIDI fader controller that speaks regular MIDI and works well with Linux. However, initialization gets delayed due to reports timeout: [3643645.631124] hid-generic 0003:09E8:0031.0020: timeout initializing reports [3643645.632416] hid-generic 0003:09E8:0031.0020: hiddev0: USB HID v1.11 Device [AKAI MIDI Mix] on usb-0000:00:14.0-2/input0 Adding "usbhid.quirks=0x09e8:0x0031:0x20000000" on the kernel command line makes the issues go away. Signed-off-by:
Steinar H. Gunderson <sgunderson@bigfoot.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Rex Zhu authored
commit 9716ebc3 upstream. Signed-off-by:
Rex Zhu <Rex.Zhu@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Stefan Agner authored
commit 6cc4758a upstream. Since using clk_register_divider to setup the pixel clock, regmap is no longer used. Regmap did take care of DCU using different endianness. Check endianness using the device-tree property "big-endian" to determine the location of DIV_RATIO. Fixes: 2d701449 ("drm/fsl-dcu: use common clock framework for pixel clock divider") Reported-by:
Meng Yi <meng.yi@nxp.com> Signed-off-by:
Stefan Agner <stefan@agner.ch> Tested-by:
-
Thomas Hellstrom authored
commit 51ab70be upstream. With older hardware versions, the user could specify arbitrarily large command buffer sizes, causing a vmalloc / vmap space exhaustion. Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
Brian Paul <brianp@vmware.com> Reviewed-by:
Sinclair Yeh <syeh@vmware.com> Signed-off-by:
-
Alex Deucher authored
commit 02cfb5fc upstream. Ported from Rex's amdgpu change. Signed-off-by:
-
Alex Deucher authored
commit 42792029 upstream. Used the wrong index to setup the phase shedding mask. Signed-off-by:
-
Alex Deucher authored
commit 884031f0 upstream. Only needed on CIK+ due to the way pci reset is handled by the GPU. Signed-off-by:
-
Rex Zhu authored
commit dc8184aa upstream. Signed-off-by:
-
Nicolai Hähnle authored
commit ce199ad6 upstream. Ensure that we really only report a GPU reset if one has happened since the creation of the context. Signed-off-by:
Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Grazvydas Ignotas authored
commit 140c94da upstream. All other amdgpu/dce_v* files have this call, it's only mysteriously missing from dce_v11_0.c since the file was added and causes leaks. Fixes: aaa36a97 ("drm/amdgpu: Add initial VI support") Signed-off-by:
Grazvydas Ignotas <notasas@gmail.com> Signed-off-by:
-
