Merge tag 'samsung-dt-2' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt

Merge "Samsung 2nd DT updates for v3.16" from Kukjin Kim:

exynos4
 - add hsotg device, exynos_usbphy nodes
 - add PMU syscon and audio subsystem nodes
 - replace number by macro in clock binding

exynos4210-universal_c210
 - add external sd card node and multimedia nodes
 - enable USB functionality

exynos4412-trats2
 - enable usb nodes and usb gagdet functionality
 - add cm36651 light/proximity sensor node
 - fixed gpio key node

exynos5250 and exynos5420
 - add pmu syscon handle and sysreg system controller nodes
 - add support for usb2phy
 - replace number by macro in clock binding
 - add USB 2.0 support on exynos5420

exynos5420-peach-pit
 - move dp hpd gpio pin to pinctrl_0

* tag 'samsung-dt-2' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (21 commits)
  ARM: dts: enable usb nodes for exynos4412-trats2
  ARM: dts: add hsotg device node for exynos4
  ARM: dts: add exynos_usbphy node for exynos4
  ARM: dts: add PMU syscon node for exynos4
  ARM: dts: add pmu syscon handle to exynos5420 hdmi
  ARM: dts: add pmu syscon handle to exynos5250 hdmi
  ARM: dts: replace number by macro in clock binding for exynos5420
  ARM: dts: replace number by macro in clock binding for exynos5250
  ARM: dts: replace number by macro in clock binding for exynos4
  ARM: dts: add external sd card node for exynos4210-universal_c210
  ARM: dts: add multimedia nodes for exynos4210-universal_c210
  ARM: dts: enable USB functionality for exynos4210-universal_c210
  ARM: dts: Enable USB gadget functionality for exynos4210-trats
  ARM: dts: Add audio subsystem nodes to exynos4.dtsi
  ARM: dts: fixed gpio key node for exynos4412-trats2
  ARM: dts: add cm36651 light/proximity sensor node for exynos4412-trats2
  ARM: dts: Add USB 2.0 support on exynos5420
  ARM: dts: Add usb2phy support on exynos5420
  ARM: dts: Add usb2phy to exynos5250
  ARM: dts: Add sysreg sytem controller node to exynos5250 and exynos5420
  ...

Merge tag 'socfpga_dt_updates-for-3.16_take_2_version_2' of git://git.rocketboards.org/linux-socfpga-next into next/dt

Merge "SOCFPGA DTS updates for 3.16, take 2-version 2" from Dinh Nguyen:

Add the gpio and watchdog dts entries for the SOCFPGA platform.

* tag 'socfpga_dt_updates-for-3.16_take_2_version_2' of git://git.rocketboards.org/linux-socfpga-next:
  ARM: socfpga: dts: add watchdog0+1
  ARM: dts: socfpga: add gpio pieces
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'sirf-dts-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux into next/dt

Merge "ARM: sirf: dts update for 3.16" from Barry Son:

some minor cleanup and add some missed nodes:
1. move dma channel descriptions to generic dma properity
2. add resets properity for some nodes;
3. add missed pinctrl groups.

* tag 'sirf-dts-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux:
  ARM: dts: sirf: add resets for dspif, gps and dsp nodes
  ARM: dts: atlas6: add cortex-a9-pmu compatible PMU node
  ARM: dts: sirf: move to use generic dma dt-binding for spi
  ARM: dts: sirf: add pin group for USP0 with only RX or TX frame sync for atlas6
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge "arm: Xilinx Zynq dt patches for v3.16" from Michal Simek:

- Cleanup GIC mode
- Cleanup node names
- Add regulators

* tag 'zynq-dt-for-3.16' of git://git.xilinx.com/linux-xlnx:
  ARM: zynq: dt: Add a fixed regulator for CPU voltage
  ARM: zynq: dt: Clean up device tree
  ARM: dts: zynq: drop address cells from GIC node
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge "ARM: berlin: DT changes for v3.16" from Sebastian Hesselbart:

Quite a lot changes but it looks like DT approach is really paying off.
BG2Q joins Berlin SoC family with corresponding development board, DW
gpio nodes for all SoCs. Most notably, we have settled clock bindings
to allow us to continue on drivers requiring clocks and pinctrl bindings.
Last but not least, BG2Q gained SDHCI support and is able to properly
boot into userspace.

* tag 'berlin-dt-3.16' of https://github.com/shesselba/linux-berlin:
  ARM: dts: berlin: enable SD card reader and eMMC for the BG2Q DMP
  ARM: dts: berlin: add the SDHCI nodes for the BG2Q
  ARM: dts: berlin: add the pinctrl node and muxing setup for uarts
  dt-binding: ARM: add pinctrl binding docs for Marvell Berlin2 SoCs
  ARM: dts: berlin: convert BG2Q to DT clock nodes
  ARM: dts: berlin: convert BG2 to DT clock nodes
  ARM: dts: berlin: convert BG2CD to DT clock nodes
  clk: berlin: add binding include for Berlin SoC clock ids
  dt-binding: ARM: add clock binding docs for Marvell Berlin2 SoCs
  ARM: dts: berlin: add the BG2CD GPIO nodes
  ARM: dts: berlin: add the BG2 GPIO nodes
  ARM: dts: berlin: add the BG2Q GPIO nodes
  ARM: dts: berlin: add scu and chipctrl device nodes for BG2/BG2Q
  ARM: dts: berlin: add the Marvell BG2-Q DMP device tree
  ARM: dts: berlin: add the Marvell Armada 1500 pro
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v3.16/dt-part2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Merge "ARM: omap dt changes for v3.16 merge window, part 2" From Tony Lindgren:

Device tree related changes for omaps.

* tag 'omap-for-v3.16/dt-part2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (49 commits)
  ARM: dts: Enable mcpdm and mcbsp1 on DuoVero
  ARM: dts: Convert DuoVero Parlor to use IOPAD macro
  ARM: dts: am43xx: fix starting offset of NAND.filesystem MTD partition
  ARM: dts: dra7: add support for parallel NAND flash
  ARM: dts: am437x-gp-evm: Add ethernet support for GP EVM
  ARM: dts: am4372: Add cpsw phy sel dt node
  ARM: OMAP2+: Use pdata quirks for wl12xx on VAR-STK/DVK-OM44
  ARM: dts: Add VAR-SOM-OM44 WLAN nodes
  ARM: dts: Add support for OMAP4 VAR-DVK-OM44
  ARM: dts: Add support for OMAP4 Variscite OM44 family
  ARM: dts: Change IOPAD macro's for OMAP4/5
  ARM: dts: AM33XX: fix ethernet and mdio default state
  ARM: dts: am4372: Add hdq device tree data
  ARM: omap2+: skip device build from platform code for dt
  dts: dra7-evm: add USB support
  ARM: dts: dra7: Add USB related nodes
  ARM: dts: dra7-clock: Add "l3init_960m_gfclk" clock gate
  ARM: dts: omap4+: Add clocks to USB2 PHY node
  ARM: dts: dra7: add OCP2SCP3 and SATA nodes
  ARM: dts: omap5: add sata node
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merging in a local copy from the next/soc branch to avoid some annoying
context conflicts in the dts Makefile.

* mvebu/soc-orion5x: (29 commits)
  ARM: orion: remove no longer needed gpio DT code
  ARM: orion: remove no longer needed DT IRQ code
  ARM: orion5x: convert Maxtor Shared Storage II to the Device Tree
  ARM: orion5x: convert d2net to Device Tree
  ARM: orion5x: convert RD-88F5182 to Device Tree
  ARM: orion5x: remove unneeded code for edmini_v2
  ARM: orion5x: keep TODO list in edmini_v2 DT
  ARM: orion5x: use DT to describe NOR on edmini_v2
  ARM: orion5x: use DT to describe EHCI on edmini_v2
  ARM: orion5x: use DT to describe I2C devices on edmini_v2
  ARM: orion5x: convert edmini_v2 to DT pinctrl
  ARM: orion5x: add standard pinctrl configs for sata0 and sata1
  ARM: orion5x: add Device Bus description at SoC level
  ARM: orion5x: update I2C description at SoC level
  ARM: orion5x: enable pinctrl driver at SoC level
  ARM: orion5x: switch to DT interrupts and timer
  ARM: orion: switch to a per-platform handle_irq() function
  ARM: orion5x: convert to use 'clocks' property for UART controllers
  ARM: orion5x: switch to use the clock driver for DT platforms
  ARM: orion5x: add interrupt for Ethernet in Device Tree
  ...

Merge "mvebu DT changes for v3.16 (incremental #2)" from Jason Cooper:

 - kirkwood
    - add OpenRD boards
    - make keymile boards bootable with latest kernels

 - mvebu
    - add ehci/xhci to Armada 375/38x boards

* tag 'mvebu-dt-3.16-2' of git://git.infradead.org/linux-mvebu:
  ARM: dts: kirkwood: add kirkwood-km_fixedeth DTS file
  ARM: dts: kirkwood: add kirkwood-km_common DTSI files
  ARM: dts: kirkwood: resynch 98dx4122 dtsi
  ARM: mvebu: add Device Tree description for the EHCI controllers on Armada 375
  ARM: mvebu: add Device Tree description of the xHCI controller on Armada 375
  ARM: mvebu: add Device Tree description of the EHCI controller on Armada 38x
  ARM: mvebu: add Device Tree description of xHCI controllers on Armada 38x
  ARM: Kirkwood: DT versions of OpenRD boards
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge "Allwinner DT changes for 3.16, take 2" from Maxime Ripard:

  - Introduction of a new board, the i12-tvbox
  - Enable the MMC and USB controllers on the Colombus
  - Add the enable-method to the A31 cpus
  - a few fixes

* tag 'sunxi-dt-for-3.16-2' of https://github.com/mripard/linux:
  ARM: dts: sun7i: Add new i12-tvbox board
  ARM: dts: sun7i: cubietruck: set mmc3 bus-width property
  ARM: sun6i: Add MMC0 controller to the Colombus board
  ARM: sun6i: Fix OHCI2 node name
  ARM: sun6i: Enable USB Host support on the Colombus board
  ARM: sunxi: Add fixed 3V regulator
  ARM: sun6i: Define the A31 CPUs enable-method
  ARM: sunxi: dt: build DTs according to new MACH_SUNxI Kconfig symbols
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Conflicts:
	arch/arm/boot/dts/Makefile

Merge "mach-bcm dt updates for 3.16" from Matt Porter:

* Add PWM support to bcm281xx and bcm28155 ap board
* Add gpldo and vbus regulators to bcm590xx

* tag 'for-3.16/bcm-dt' of git://github.com/broadcom/mach-bcm:
  ARM: dts: bcm590xx: add support for GPLDO and VBUS regulators
  ARM: dts: Enable the PWM for bcm28155 AP board
  ARM: dts: Declare the PWM for bcm11351 (bcm281xx)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-dt-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into for-next

Merge "Qualcomm ARM Based Device Tree Updates for v3.16" from Kumar Gala:

* Added device tree nodes for pinctrl and SDHC for msm8974 SoC/DB8074 board
* Added binding spec for GSBI configuration node

* tag 'qcom-dt-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom:
  soc: qcom: Add device tree binding for GSBI
  ARM: dts: msm: Add SDHC controller nodes for MSM8974 and DB8074 board
  ARM: dts: MSM8974: Add pinctrl node
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

3.16 third DT series:
- move of both at91sam9n12 and at91sam9x5 to CCF

* tag 'at91-dt3' of git://github.com/at91linux/linux-at91:
  ARM: at91: move sam9n12 SoC to the CCF
  ARM: at91/dt: define sam9n12ek crystal frequencies
  ARM: at91/dt: define sam9n12 clocks
  ARM: at91: prepare common clk transition for sam9n12 SoC
  ARM: at91: move sam9x5 SoCs to the CCF
  ARM: at91/dt: define sam9x5ek's crystal frequencies
  ARM: at91/dt: define sam9x5 clocks
  ARM: at91: prepare common clk transition for sam9x5 SoCs
  dt-bindings: clock: Move at91.h to dt-bindigs/clock
  ARM: at91: fix spi cs on sama5d3 Xplained board
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Conflicts:
	arch/arm/boot/dts/at91sam9rl.dtsi

Needed as a dependency for the at91/dt2 branch
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge "ARM: STi: DT changes for v3.16, v3" from Maxime Coquelin:

Please consider these STi DT updates for v3.16.

This 3rd version takes into account Olof's comments on the v2:
        - Fix upper-cases in labels and node names
        - Sort compatibles order from specific to generic
        - Sort dts entries in Makefile

It also adds support for the B2020 revision E board for STiH416 SoC.

Note that two reset patches are part of this pull request, in order to avoid
compilation breakage.
Adding these two patches in this pull request has been accepted by Philipp Zabel.

* tag 'sti-dt-for-v3.16-1' of git://git.stlinux.com/devel/kernel/linux-sti: (23 commits)
  ARM: sti: stih41x: Provide a proper header for this DTSI file
  ARM: sti: stih416: Enable board LED support for B2020 RevE
  ARM: sti: stih416: Add support for B2020 RevE
  ARM: STi: DT: STiH41x Add clk_ignore_unused to bootargs
  ARM: STi: DT: STiH415: 415 DT Entry for clockgen A9
  ARM: STi: DT: STiH415: Remove unused CLK_S_GMAC0_PHY & CLK_S_ETH1_PHY fixed clocks
  ARM: STi: DT: STiH415: Remove unused CLK_S_ICN_REG_0 fixed clock
  ARM: STi: DT: STiH415: 415 DT Entry for clockgen A0/1/10/11/12
  ARM: STi: DT: STiH416: 416 DT Entry for clockgen A9/DDR/GPU
  ARM: STi: DT: STiH416: 416 DT Entry for clockgen B/C/D/E/F
  ARM: STi: DT: STiH416: Remove unused CLK_S_GMAC0_PHY & CLK_S_ETH1_PHY fixed clocks
  ARM: STi: DT: STiH416: Remove unused CLK_S_ICN_REG_0 fixed clock
  ARM: STi: DT: STiH416: 416 DT Entry for clockgen A0/1/10/11/12
  ARM: STi: DT: STiH41x: Rename CLK_SYSIN into clk_sysin
  ARM: STi: DT: add keyscan for stih41x-b2000
  ARM: STi: DT: add keyscan for stih416
  ARM: STi: DT: add keyscan for stih415
  driver: reset: sti: add keyscan for stih416
  driver: reset: sti: add keyscan for stih415
  ARM: dts: STiH407: Add B2120 board support
  ...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Add device tree binding support for the QCOM GSBI driver.
Signed-off-by: Andy Gross <agross@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>

Adds additional nodes to support GPLDO1-6 and VBUS regulators which
are now supported in the bcm590xx regulator driver.
Signed-off-by: Matt Porter <mporter@linaro.org>

Add support for the 2 SDHC controllers on the DB8074 board.  The first
controller (at 0xf9824900) is connected to an on board soldered eMMC.
The second controller (at 0xf98a4900) is connected to a uSD card slot.
Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
Signed-off-by: Kumar Gala <galak@codeaurora.org>

The SoCFPGA has two watchdog timers. Add them to the dtsi.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
[dinh: modified patch to have correct irq flag]
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>

The cycloneV has three gpio controllers, each one with 29 gpios. This patch
adds the three controller with the gpio driver which is now sitting the
gpio tree.

Cc: devicetree@vger.kernel.org
Acked-by: Alan Tull <atull@altera.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>

This patch enables exynos_usbphy and hsotg device nodes.

Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Kamil Debski <k.debski@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

This patch adds a hsotg node for exynos4 USB2.0 device controller.

Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Kamil Debski <k.debski@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

This patch enables a exynos_usbphy node for exynos4 SoCs.
A exynos4x12 usb phy node is almost same with 4210's one
except compatible string and pmu syscon.

Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

This patch adds a PMU(Power Management Unit) syscon node. This
should be required for USB Phy syscon regmap I/F.

Cc: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

Add PMU syscon handle to HDMI dt node for controlling
PHY Enable/Disable bit.
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

Add PMU syscon handle to HDMI dt node for controlling
PHY Enable/Disable bit.
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

sss module device node missed clock macro.
This patch replace magic number with macro in clock
binding for exynos5420.
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
Reviewed-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

Phy and sss module device node missed clock macro.
This patch replace magic number with macros in clock
binding for exynos5250.
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
Reviewed-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

This patch replaces magic number of MIPI DSI Master node with
macros in clock binding for exynos4
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
Reviewed-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

This patch enables support external SD card slot.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

This patch enables support for multimedia blocks - fimc in
mem2mem mode, no camera sensors support yet.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

This patch adds device tree nodes necessary to enable USB support on
universalc210 board, this includes UDC controller (USB gadget) as well
as EHCI and OHCI host ports. LDO3 and LDO8 regulators are switched to
always on mode until EHCI and OHCI drivers will support them correctly.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

This patch adds device tree nodes necessary to enable USB
gadget functionality on Exynos4210-based Trats board.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

This patch adds the audio subsystem clock controller and the I2S
IP block nodes for Exynos4 SoC series.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

This patch fixed gpio key device node.
First, fix incorrect gpio property.
And then, add ok-key node where locate bottom center.
I have tested on exynos4412-trats2 board.
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

Exynos4412-trats2 board have light/proximity sensor.
This patch add cm36651 light/ proximity sensor node for exynos4412.
cm36651 is required properties as below.
- Use i2c-gpio for cm36651 sensor.
- Use fixed regulator for the IR LED.
  It is a part of the cm36651 for proximity detection.
- cm36651 is i2c device driver so need to use i2c-gpio driver.
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

Add the pin control node and pin definitions of SPI8.
Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>

This patch removes the selection of AT91_USE_OLD_CLK when selecting
sam9n12 SoC support. This will automatically enable COMMON_CLK_AT91 option
and add support for at91 common clk implementation.
Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Tested-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Define sam9n12ek's main and slow crystal frequencies.
Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Tested-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Define sam9n12 clocks and make use of them in peripheral definitions.
Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Tested-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

This patch encloses sam9n12 old clk registration in
"#if defined(CONFIG_OLD_CLK_AT91) #endif" sections.
Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Tested-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>