- 12 Nov, 2019 32 commits
-
-
Jose Abreu authored
This looks over-engineered. Let's use some helpers to get the buffer length and hereby simplify the stmmac_rx() function. No performance drop was seen with the new implementation. Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jose Abreu authored
XGMAC3 supports full CBS features with speeds that can go up to 10G so we can now remove the maximum speed check of CBS. Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jose Abreu authored
Add the support for C45 PHYs in the MDIO callbacks for XGMAC. This was tested using Synopsys DesignWare XPCS. v2: - Pull out the readl_poll_timeout() calls into common code (Andrew) Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jose Abreu authored
GMAC4+ cores also support the Split Header feature. Add the support for Split Header feature in the RX path following the same implementation logic that XGMAC followed. Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jose Abreu authored
The VID is converted to le16 so the variable must be __le16 type. Reported-by: kbuild test robot <lkp@intel.com> Fixes: c7ab0b80 ("net: stmmac: Fallback to VLAN Perfect filtering if HASH is not available") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
Variable hdr_len is being assigned a value that is never read. The assignment is redundant and hence can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
Variable err is not uninitialized and hence can potentially contain any garbage value. This may cause an error when logical or'ing the return values from the calls to functions crypto_aead_setauthsize or crypto_aead_setkey. Fix this by setting err to the return of crypto_aead_setauthsize rather than or'ing in the return into the uninitialized variable Addresses-Coverity: ("Uninitialized scalar variable") Fixes: fc1b6d6d ("tipc: introduce TIPC encryption & authentication") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Madalin Bucur authored
The sysfs paths changed, updating to the current ones. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Madalin Bucur authored
Recent changes in the dpaa_eth driver reduced the number of buffer pools per interface from three to one. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jesper Dangaard Brouer authored
Side effect of some kbuild changes resulted in breaking the documented way to build samples/bpf/. This patch change the samples/bpf/Makefile to work again, when invoking make from the subdir samples/bpf/. Also update the documentation in README.rst, to reflect the new way to build. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Call devlink enable only during probe time and avoid deadlock during reload. Reported-by: Shalom Toledo <shalomt@mellanox.com> Fixes: a0c76345 ("devlink: disallow reload operation during device cleanup") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Tested-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
Add support for chip version RTL8117. Settings have been copied from Realtek's r8168 driver, there however chip ID 54a belongs to a chip version called RTL8168FP. It was confirmed that RTL8117 works with Realtek's driver, so both chip versions seem to be the same or at least compatible. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Russell King says: ==================== sfp: Allow slow to initialise GPON modules to work Some GPON modules take longer than the SFF MSA specified time to initialise and respond to transactions on the I2C bus for either both 0x50 and 0x51, or 0x51 bus addresses. Technically these modules are non-compliant with the SFP Multi-Source Agreement, they have been around for some time, so are difficult to just ignore. Most of the patch series is restructuring the code to make it more readable, and split various things into separate functions. We split the three state machines into three separate functions, and re-arrange them to start probing the module as soon as a module has been detected (without waiting for the network device.) We try to read the module's EEPROM, retrying quickly for the first second, and then once every five seconds for about a minute until we have read the EEPROM. So that the kernel isn't entirely silent, we print a message indicating that we're waiting for the module to respond after the first second, or when all retries have expired. Once the module ID has been read, we kick off a delayed work queue which attempts to register the hwmon, retrying for up to a minute if the monitoring parameters are unreadable; this allows us to proceed with module initialisation independently of the hwmon state. With high-power modules, we wait for the netdev to be attached before switching the module power mode, and retry this in a similar way to before until we have successfully read and written the EEPROM at 0x51. We also move the handling of the TX_DISABLE signal entirely to the main state machine, and avoid probing any on-board PHY while TX_FAULT is set. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
When a module is inserted, we attempt to read read the ID from address 0x50. Once we are able to read the ID, we immediately attempt to initialise the hwmon support by reading from address 0x51. If this fails, then we fall into error state, and assume that the module is not usable. Modules such as the ALCATELLUCENT 3FE46541AA use a real EEPROM for I2C address 0x50, which responds immediately. However, address 0x51 is an emulated, which only becomes available once the on-board firmware has booted. This prompts us to fall into the error state. Since the module may be usable without diagnostics, arrange for the hwmon probe independent of the rest of the SFP itself, retrying every 5s for up to about 60s for the monitoring to become available, and print an error message if it doesn't become available. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
Some GPON modules (e.g. Huawei MA5671A) take a significant amount of time to start responding on the I2C bus, contary to the SFF specifications. Work around this by implementing a two-level timeout strategy, where we initially quickly retry for the module, and then use a slower retry after we exceed a maximum number of quick attempts. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
Move the module insertion reporting out of the probe handling, but after we have detected that the upstream has attached (since that is whom we are reporting insertion to.) Only report module removal if we had previously reported a module insertion. This gives cleaner semantics, and means we can probe the module before we have an upstream attached. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
Switch the power mode switching from the probe, so that we don't repeatedly re-probe the SFP device if there is a problem accessing the registers at I2C address 0x51. In splitting this out, we can also fix a bug where we leave the module in high-power mode when the upstream device is detached but the module is still inserted. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
Track the upstream's attachment state in the state machine rather than maintaining a boolean, which ensures that we have a strict order of ATTACH followed by an UP event - we can never believe that a newly attached upstream will be anything but down. Rearrange the order of state machines so we run the module state machine after the upstream device's state machine, so the module state machine can check the current state of the device and take action to e.g. reset back to empty state when the upstream is detached. This is to allow the module detection to run independently of the network device becoming available. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
TX_FAULT should be deasserted to indicate that the module has completed its initialisation. This may include the on-board PHY, so wait until the module has deasserted TX_FAULT before probing the PHY. This means that we need an extra state to handle a TX_FAULT that remains set for longer than t_init, since using the existing handling state would bypass the PHY probe. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
Add the next state to sfp_sm_fault() so that it can branch to other states. This will be necessary to improve the initialisation path. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
Rather than using mdelay() to wait before probing the PHY (which holds several locks, including the rtnl lock), add an extra wait state to the state machine to introduce the 50ms delay without holding any locks. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
Move the PHY probe into a separate function, splitting it from sfp_sm_mod_init(). This will allow us to eliminate the 50ms mdelay() inside the state machine. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
We initialise TX_DISABLE when the sfp cage is probed, and then maintain its state in the main state machine. However, the module state machine: - negates it when detecting a newly inserted module when it's already guaranteed to be negated. - negates it when the module is removed, but the main state machine will do this anyway. Make TX_DISABLE entirely controlled by the main state machine. The main state machine also probes the module for a PHY, and removes the PHY when the the module is removed. Hence, removing the PHY in sfp_sm_module_remove() is also redundant, and is a left-over from when we tried to probe for the PHY from the module state machine. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
If the module indicates that it requires an address change sequence to switch between address 0x50 and 0x51, which we don't support, we can't write to the register that controls the power mode to switch to high power mode. Warn the user that the module may not be functional in this case, and don't try to change the power mode. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
Parse the SFP power requirement earlier, in preparation for moving the power level setup code. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
SFF-8472 rev 12.2 defines the time for the serial bus to become ready using t_serial. Use this as our identifier for this timeout to make it clear what we are referring to. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
Removing a module resets the module state machine back to its initial state. Rather than explicitly handling this in every state, handle it early on outside of the state machine. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
sfp_sm_ins_next() modifies the module state machine. Change it's name to reflect this. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
Move the tx disable assertion on device down to the main state machine. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
Move the SFP sub-state machines out of the main state machine function, in preparation for it doing a bit more with the device state. By doing so, we ensure that our debug after the main state machine is always printed. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
The kbuild test robot found a problem with htmldocs with the recent change to the SFP interfaces. Fix the kernel documentation for sfp_bus_put() which was missing an '@' before the argument name description. Fixes: 727b3668 ("net: sfp: rework upstream interface") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
Currently, if network is re-started, we advertise all supported EEE modes, thus potentially overriding a manual adjustment the user made e.g. via ethtool. Be friendly to the user and preserve a manual setting on network re-start. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 11 Nov, 2019 8 commits
-
-
Xin Long authored
TUNNEL_OPTIONS_PRESENT (TUNNEL_GENEVE_OPT|TUNNEL_VXLAN_OPT| TUNNEL_ERSPAN_OPT) flags should be set only according to tb[LWTUNNEL_IP_OPTS], which is done in ip_tun_parse_opts(). When setting info key.tun_flags, the TUNNEL_OPTIONS_PRESENT bits in tb[LWTUNNEL_IP(6)_FLAGS] passed from users should be ignored. While at it, replace all (TUNNEL_GENEVE_OPT|TUNNEL_VXLAN_OPT| TUNNEL_ERSPAN_OPT) with 'TUNNEL_OPTIONS_PRESENT'. Fixes: 3093fbe7 ("route: Per route IP tunnel metadata via lightweight tunnel") Fixes: 32a2b002 ("ipv6: route: per route IP tunnel metadata via lightweight tunnel") Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
erspan v1 has OPT_ERSPAN_INDEX while erspan v2 has OPT_ERSPAN_DIR and OPT_ERSPAN_HWID attributes, and they require different nlsize when dumping. So this patch is to get nlsize for erspan options properly according to erspan version. Fixes: b0a21810 ("lwtunnel: add options setting and dumping for erspan") Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
As the new options added in kernel, all should always use strict parsing from the beginning with nla_parse_nested(), instead of nla_parse_nested_deprecated(). Fixes: b0a21810 ("lwtunnel: add options setting and dumping for erspan") Fixes: edf31cbb ("lwtunnel: add options setting and dumping for vxlan") Fixes: 4ece4778 ("lwtunnel: add options setting and dumping for geneve") Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Vladimir Oltean says: ==================== Accomodate DSA front-end into Ocelot After the nice "change-my-mind" discussion about Ocelot, Felix and LS1028A (which can be read here: https://lkml.org/lkml/2019/6/21/630), we have decided to take the route of reworking the Ocelot implementation in a way that is DSA-compatible. This is a large series, but hopefully is easy enough to digest, since it contains mostly code refactoring. What needs to be changed: - The struct net_device, phy_device needs to be isolated from Ocelot private structures (struct ocelot, struct ocelot_port). These will live as 1-to-1 equivalents to struct dsa_switch and struct dsa_port. - The function prototypes need to be compatible with DSA (of course, struct dsa_switch will become struct ocelot). - The CPU port needs to be assigned via a higher-level API, not hardcoded in the driver. What is going to be interesting is that the new DSA front-end of Ocelot will need to have features in lockstep with the DSA core itself. At the moment, some more advanced tc offloading features of Ocelot (tc-flower, etc) are not available in the DSA front-end due to lack of API in the DSA core. It also means that Ocelot practically re-implements large parts of DSA (although it is not a DSA switch per se) - see the FDB API for example. The code has been only compile-tested on Ocelot, since I don't have access to any VSC7514 hardware. It was proven to work on NXP LS1028A, which instantiates a DSA derivative of Ocelot. So I would like to ask Alex Belloni if you could confirm this series causes no regression on the Ocelot MIPS SoC. The goal is to get this rework upstream as quickly as possible, precisely because it is a large volume of code that risks gaining merge conflicts if we keep it for too long. This is but the first chunk of the LS1028A Felix DSA driver upstreaming. For those who are interested, the concept can be seen on my private Github repo, the user of this reworked Ocelot driver living under drivers/net/dsa/vitesse/: https://github.com/vladimiroltean/ls1028ardb-linux ==================== Acked-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
VSC7514 is a 10-port switch with 2 extra "CPU ports" (targets in the queuing subsystem for terminating traffic locally). There are 2 issues with hardcoding the CPU port as #10: - It is not clear which snippets of the code are configuring something for one of the CPU ports, and which snippets are just doing something related to the number of physical ports. - Actually any physical port can act as a CPU port connected to an external CPU (in addition to the local CPU). This is called NPI mode (Node Processor Interface) and is the way that the 6-port VSC9959 (Felix) switch is integrated inside NXP LS1028A (the "local management CPU" functionality is not used there). This patch makes it clear that the ocelot_bridge_stp_state_set function operates on the CPU port (by making it an implicit member of the bridging domain), and at the same time adds logic for the NPI port (aka a physical port) to play the role of a CPU port (it shouldn't be part of bridge_fwd_mask, as it's not explicitly enslaved to a bridge). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
Now that the places that configure routing destinations for the CPU port have been marked as such, allow callers to specify their own CPU port that is different than ocelot->num_phys_ports. A user will be the Felix DSA driver, where the CPU port is one of the physical ports (NPI mode). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
This will be called from the Felix DSA frontend, which will work in PHYLIB compatibility mode initially. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Claudiu Manoil authored
This is just common path code that belongs to ocelot_init, it has nothing to do with a specific SoC/board instance. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-