Pull clk fixes from Stephen Boyd:
 "A collection of fixes:

   - Make of_clk.h self contained

   - Fix new qcom DT bindings that just merged to match the DTS files

   - Fix qcom clk driver to properly detect DFS clk frequencies

   - Fix the ls1028a driver to not deref a pointer before assigning it"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  of: clk: Make <linux/of_clk.h> self-contained
  clk: qcom: Use ARRAY_SIZE in videocc-sc7180 for parent clocks
  clk: qcom: Get rid of the test clock for videocc-sc7180
  dt-bindings: clock: Cleanup qcom,videocc bindings for sdm845/sc7180
  clk: qcom: Use ARRAY_SIZE in gpucc-sc7180 for parent clocks
  clk: qcom: Get rid of the test clock for gpucc-sc7180
  dt-bindings: clock: Fix qcom,gpucc bindings for sdm845/sc7180/msm8998
  clk: qcom: Use ARRAY_SIZE in dispcc-sc7180 for parent clocks
  clk: qcom: Get rid of the test clock for dispcc-sc7180
  clk: qcom: Get rid of fallback global names for dispcc-sc7180
  dt-bindings: clock: Fix qcom,dispcc bindings for sdm845/sc7180
  clk: qcom: rcg2: Don't crash if our parent can't be found; return an error
  clk: ls1028a: fix a dereference of pointer 'parent' before a null check
  dt-bindings: clk: qcom: Fix self-validation, split, and clean cruft
  clk: qcom: Don't overwrite 'cfg' in clk_rcg2_dfs_populate_freq()

Pull watchdog updates from Wim Van Sebroeck:

 - add IT8786 chipset ID

 - addition of sam9x60 compatible watchdog

 - da9062 improvements

 - fix UAF in reboot notifier handling in watchdog core code

 - other fixes and small improvements

* tag 'linux-watchdog-5.6-rc1' of git://www.linux-watchdog.org/linux-watchdog:
  watchdog: da9062: make restart handler atomic safe
  watchdog: mtk_wdt: mt2712: Add reset controller
  watchdog: mtk_wdt: mt8183: Add reset controller
  dt-bindings: mediatek: mt2712: Add #reset-cells
  dt-bindings: mediatek: mt8183: Add #reset-cells
  dt-bindings: watchdog: da9062: add suspend disable option
  watchdog: it87_wdt: add IT8786 ID
  watchdog: dw_wdt: ping watchdog to reset countdown before start
  watchdog: fix UAF in reboot notifier handling in watchdog core code
  watchdog: cadence: Skip printing pointer value
  watchdog: qcom: Use platform_get_irq_optional() for bark irq
  watchdog: da9062: add power management ops
  watchdog: make DesignWare watchdog allow users to set bigger timeout value
  drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probe
  watchdog: sama5d4_wdt: addition of sam9x60 compatible watchdog

Pull virtio updates from Michael Tsirkin:
 "Some bug fixes/cleanups.

  The deprecated scsi passthrough for virtio_blk is removed"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio_balloon: Fix memory leaks on errors in virtballoon_probe()
  virtio-balloon: Fix memory leak when unloading while hinting is in progress
  virtio_balloon: prevent pfn array overflow
  virtio-blk: remove VIRTIO_BLK_F_SCSI support
  virtio-pci: check name when counting MSI-X vectors
  virtio-balloon: initialize all vq callbacks
  virtio-mmio: convert to devm_platform_ioremap_resource

Pull xtensa updates from Max Filippov:

 - reorganize exception vectors placement

 - small cleanups (drop unused functions/headers/defconfig entries,
   spelling fixes)

* tag 'xtensa-20200206' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: ISS: improve simcall assembly
  xtensa: reorganize vectors placement
  xtensa: separate SMP and XIP support
  xtensa: move fast exception handlers close to vectors
  arch/xtensa: fix Kconfig typos for HAVE_SMP
  xtensa: clean up optional XCHAL_* definitions
  xtensa: drop unused function fast_coprocessor_double
  xtensa: drop empty platform_* functions from platforms
  xtensa: clean up platform headers
  xtensa: drop set_except_vector declaration
  xtensa: configs: Cleanup old Kconfig IO scheduler options

Pull more KVM updates from Paolo Bonzini:
 "s390:
   - fix register corruption
   - ENOTSUPP/EOPNOTSUPP mixed
   - reset cleanups/fixes
   - selftests

  x86:
   - Bug fixes and cleanups
   - AMD support for APIC virtualization even in combination with
     in-kernel PIT or IOAPIC.

  MIPS:
   - Compilation fix.

  Generic:
   - Fix refcount overflow for zero page"

* tag 'kvm-5.6-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits)
  KVM: vmx: delete meaningless vmx_decache_cr0_guest_bits() declaration
  KVM: x86: Mark CR4.UMIP as reserved based on associated CPUID bit
  x86: vmxfeatures: rename features for consistency with KVM and manual
  KVM: SVM: relax conditions for allowing MSR_IA32_SPEC_CTRL accesses
  KVM: x86: Fix perfctr WRMSR for running counters
  x86/kvm/hyper-v: don't allow to turn on unsupported VMX controls for nested guests
  x86/kvm/hyper-v: move VMX controls sanitization out of nested_enable_evmcs()
  kvm: mmu: Separate generating and setting mmio ptes
  kvm: mmu: Replace unsigned with unsigned int for PTE access
  KVM: nVMX: Remove stale comment from nested_vmx_load_cr3()
  KVM: MIPS: Fold comparecount_func() into comparecount_wakeup()
  KVM: MIPS: Fix a build error due to referencing not-yet-defined function
  x86/kvm: do not setup pv tlb flush when not paravirtualized
  KVM: fix overflow of zero page refcount with ksm running
  KVM: x86: Take a u64 when checking for a valid dr7 value
  KVM: x86: use raw clock values consistently
  KVM: x86: reorganize pvclock_gtod_data members
  KVM: nVMX: delete meaningless nested_vmx_run() declaration
  KVM: SVM: allow AVIC without split irqchip
  kvm: ioapic: Lazy update IOAPIC EOI
  ...

Pull kgdb fix from Daniel Thompson:
 "One of the simplifications added for 5.6-rc1 has caused build
  regressions on some platforms (it was reported for sparc64).

  This fixes it with a revert"

* tag 'kgdb-fixes-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
  Revert "kdb: Get rid of confusing diag msg from "rd" if current task has no regs"

Pull PCI fixes from Bjorn Helgaas:

 - Define to_pci_sysdata() always to fix build breakage when !CONFIG_PCI
   (Jason A. Donenfeld)

 - Use PF PASID for VFs to fix VF IOMMU bind failures (Kuppuswamy
   Sathyanarayanan)

* tag 'pci-v5.6-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI/ATS: Use PF PASID for VFs
  x86/PCI: Define to_pci_sysdata() even when !CONFIG_PCI

Pull sound fixes from Takashi Iwai:
 "A collection of pending small fixes:

  ALSA core:
   - PCM memory leak fix

  ASoC:
   - Lots of SOF and Intel driver fixes
   - Addition of COMMON_CLK for wcd934x
   - Regression fixes for AMD and Tegra platforms

  HD-audio:
   - DP-MST HDMI regression fix, Tegra workarounds, HP quirk fix

  Others:
   - A few fixes relevant with the recent uapi-updates
   - Sparse warnings and endianness fixes"

* tag 'sound-fix-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (35 commits)
  ALSA: hda: Clear RIRB status before reading WP
  ALSA: hda/realtek - Fixed one of HP ALC671 platform Headset Mic supported
  ASoC: wcd934x: Add missing COMMON_CLK dependency to SND_SOC_ALL_CODECS
  ALSA: hda - Fix DP-MST support for NVIDIA codecs
  ASoC: wcd934x: Add missing COMMON_CLK dependency
  MAINTAINERS: Remove the Bard Liao from the MAINTAINERS of Realtek CODECs
  ASoC: tegra: Revert 24 and 32 bit support
  ASoC: SOF: Intel: add PCI ID for JasperLake
  ALSA: hdsp: Make the firmware loading ioctl a bit more readable
  ALSA: emu10k1: Fix annotation and cast for the recent uapi header change
  ALSA: dummy: Fix PCM format loop in proc output
  ALSA: usb-audio: Annotate endianess in Scarlett gen2 quirk
  ALSA: usb-audio: Fix endianess in descriptor validation
  ALSA: hda: Add JasperLake PCI ID and codec vid
  ALSA: pcm: Fix sparse warnings wrt snd_pcm_state_t
  ALSA: pcm: Fix memory leak at closing a stream without hw_free
  ALSA: uapi: Fix sparse warning
  ASoC: rt715: Add __maybe_unused to PM callbacks
  ASoC: rt711: Add __maybe_unused to PM callbacks
  ASoC: rt700: Add __maybe_unused to PM callbacks
  ...

Pull ceph fixes from Ilya Dryomov:

 - a set of patches that fixes various corner cases in mount and umount
   code (Xiubo Li). This has to do with choosing an MDS, distinguishing
   between laggy and down MDSes and parsing the server path.

 - inode initialization fixes (Jeff Layton). The one included here
   mostly concerns things like open_by_handle() and there is another one
   that will come through Al.

 - copy_file_range() now uses the new copy-from2 op (Luis Henriques).
   The existing copy-from op turned out to be infeasible for generic
   filesystem use; we disable the copy offload if OSDs don't support
   copy-from2.

 - a patch to link "rbd" and "block" devices together in sysfs (Hannes
   Reinecke)

... and a smattering of cleanups from Xiubo, Jeff and Chengguang.

* tag 'ceph-for-5.6-rc1' of https://github.com/ceph/ceph-client: (25 commits)
  rbd: set the 'device' link in sysfs
  ceph: move net/ceph/ceph_fs.c to fs/ceph/util.c
  ceph: print name of xattr in __ceph_{get,set}xattr() douts
  ceph: print r_direct_hash in hex in __choose_mds() dout
  ceph: use copy-from2 op in copy_file_range
  ceph: close holes in structs ceph_mds_session and ceph_mds_request
  rbd: work around -Wuninitialized warning
  ceph: allocate the correct amount of extra bytes for the session features
  ceph: rename get_session and switch to use ceph_get_mds_session
  ceph: remove the extra slashes in the server path
  ceph: add possible_max_rank and make the code more readable
  ceph: print dentry offset in hex and fix xattr_version type
  ceph: only touch the caps which have the subset mask requested
  ceph: don't clear I_NEW until inode metadata is fully populated
  ceph: retry the same mds later after the new session is opened
  ceph: check availability of mds cluster on mount after wait timeout
  ceph: keep the session state until it is released
  ceph: add __send_request helper
  ceph: ensure we have a new cap before continuing in fill_inode
  ceph: drop unused ttl_from parameter from fill_inode
  ...

This reverts commit bbfceba1.

When DBG_MAX_REG_NUM is zero then a number of symbols are conditionally
defined. It is therefore not possible to check it using C expressions.
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Acked-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>

Merge tag 'asoc-v5.6-3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fix for v5.6

An incremental fix for the Qualcomm COMMON_CLK issue.

RIRB interrupt status getting cleared after the write pointer is read
causes a race condition, where last response(s) into RIRB may remain
unserviced by IRQ, eventually causing azx_rirb_get_response to fall
back to polling mode. Clearing the RIRB interrupt status ahead of
write pointer access ensures that this condition is avoided.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Signed-off-by: Viswanath L <viswanathl@nvidia.com>
Link: https://lore.kernel.org/r/1580983853-351-1-git-send-email-viswanathl@nvidia.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

We forget to put the inode and unmount the kernfs used for compaction.

Fixes: 71994620 ("virtio_balloon: replace oom notifier with shrinker")
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Wei Wang <wei.w.wang@intel.com>
Cc: Liang Li <liang.z.li@intel.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200205163402.42627-3-david@redhat.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>

When unloading the driver while hinting is in progress, we will not
release the free page blocks back to MM, resulting in a memory leak.

Fixes: 86a55978 ("virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT")
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Wei Wang <wei.w.wang@intel.com>
Cc: Liang Li <liang.z.li@intel.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200205163402.42627-2-david@redhat.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>

Make sure, at build time, that pfn array is big enough to hold a single
page.  It happens to be true since the PAGE_SHIFT value at the moment is
20, which is 1M - exactly 256 4K balloon pages.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>

Since the need for a special flag to support SCSI passthrough on a
block device was added in May 2017 the SCSI passthrough support in
virtio-blk has been disabled.  It has always been a bad idea
(just ask the original author..) and we have virtio-scsi for proper
passthrough.  The feature also never made it into the virtio 1.0
or later specifications.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>

VQs without a name specified are not valid; they are skipped in the
later loop that assigns MSI-X vectors to queues, but the per_vq_vectors
loop above that counts the required number of vectors previously still
counted any queue with a non-NULL callback as needing a vector.

Add a check to the per_vq_vectors loop so that vectors with no name are
not counted to make the two loops consistent.  This prevents
over-counting unnecessary vectors (e.g. for features which were not
negotiated with the device).

Cc: stable@vger.kernel.org
Fixes: 86a55978 ("virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT")
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Wang, Wei W <wei.w.wang@intel.com>

Ensure that elements of the callbacks array that correspond to
unavailable features are set to NULL; previously, they would be left
uninitialized.

Since the corresponding names array elements were explicitly set to
NULL, the uninitialized callback pointers would not actually be
dereferenced; however, the uninitialized callbacks elements would still
be read in vp_find_vqs_msix() and used to calculate the number of MSI-X
vectors required.

Cc: stable@vger.kernel.org
Fixes: 86a55978 ("virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT")
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Use devm_platform_ioremap_resource() to simplify code, which
contains platform_get_resource, devm_request_mem_region and
devm_ioremap.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Pull m68knommu updates from Greg Ungerer:
 "A couple of changes:

   - remove old CONFIG options from the m68knommu defconfig files

   - fix a warning in the m68k non-MMU get_user() macro"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: fix memcpy() out of bounds warning in get_user()
  m68k: configs: Cleanup old Kconfig IO scheduler options

Pull smack fix from Casey Schaufler:
 "One fix for an obscure error found using an old version of ping(1)
  that did not use IPv6 sockets in the documented way"

* tag 'Smack-for-5.6' of git://github.com/cschaufler/smack-next:
  broken ping to ipv6 linklocal addresses on debian buster

Pull moar xfs updates from Darrick Wong:
 "This contains the buffer error code refactoring I mentioned last week,
  now that it has had extra time to complete the full xfs fuzz testing
  suite to make sure there aren't any obvious new bugs"

* tag 'xfs-5.6-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: fix xfs_buf_ioerror_alert location reporting
  xfs: remove unnecessary null pointer checks from _read_agf callers
  xfs: make xfs_*read_agf return EAGAIN to ALLOC_FLAG_TRYLOCK callers
  xfs: remove the xfs_btree_get_buf[ls] functions
  xfs: make xfs_trans_get_buf return an error code
  xfs: make xfs_trans_get_buf_map return an error code
  xfs: make xfs_buf_read return an error code
  xfs: make xfs_buf_get_uncached return an error code
  xfs: make xfs_buf_get return an error code
  xfs: make xfs_buf_read_map return an error code
  xfs: make xfs_buf_get_map return an error code
  xfs: make xfs_buf_alloc return an error code

Pull tracing updates from Steven Rostedt:

 - Added new "bootconfig".

   This looks for a file appended to initrd to add boot config options,
   and has been discussed thoroughly at Linux Plumbers.

   Very useful for adding kprobes at bootup.

   Only enabled if "bootconfig" is on the real kernel command line.

 - Created dynamic event creation.

   Merges common code between creating synthetic events and kprobe
   events.

 - Rename perf "ring_buffer" structure to "perf_buffer"

 - Rename ftrace "ring_buffer" structure to "trace_buffer"

   Had to rename existing "trace_buffer" to "array_buffer"

 - Allow trace_printk() to work withing (some) tracing code.

 - Sort of tracing configs to be a little better organized

 - Fixed bug where ftrace_graph hash was not being protected properly

 - Various other small fixes and clean ups

* tag 'trace-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (88 commits)
  bootconfig: Show the number of nodes on boot message
  tools/bootconfig: Show the number of bootconfig nodes
  bootconfig: Add more parse error messages
  bootconfig: Use bootconfig instead of boot config
  ftrace: Protect ftrace_graph_hash with ftrace_sync
  ftrace: Add comment to why rcu_dereference_sched() is open coded
  tracing: Annotate ftrace_graph_notrace_hash pointer with __rcu
  tracing: Annotate ftrace_graph_hash pointer with __rcu
  bootconfig: Only load bootconfig if "bootconfig" is on the kernel cmdline
  tracing: Use seq_buf for building dynevent_cmd string
  tracing: Remove useless code in dynevent_arg_pair_add()
  tracing: Remove check_arg() callbacks from dynevent args
  tracing: Consolidate some synth_event_trace code
  tracing: Fix now invalid var_ref_vals assumption in trace action
  tracing: Change trace_boot to use synth_event interface
  tracing: Move tracing selftests to bottom of menu
  tracing: Move mmio tracer config up with the other tracers
  tracing: Move tracing test module configs together
  tracing: Move all function tracing configs together
  tracing: Documentation for in-kernel synthetic event API
  ...

HP want to keep BIOS verb table for release platform.
So, it need to add 0x19 pin for quirk.

Fixes: 5af29028 ("ALSA: hda/realtek - Add Headset Mic supported for HP cPC")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/74636ccb700a4cbda24c58a99dc430ce@realtek.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Pull io_uring updates from Jens Axboe:
 "Some later fixes for io_uring:

   - Small cleanup series from Pavel

   - Belt and suspenders build time check of sqe size and layout
     (Stefan)

   - Addition of ->show_fdinfo() on request of Jann Horn, to aid in
     understanding mapped personalities

   - eventfd recursion/deadlock fix, for both io_uring and aio

   - Fixup for send/recv handling

   - Fixup for double deferral of read/write request

   - Fix for potential double completion event for close request

   - Adjust fadvise advice async/inline behavior

   - Fix for shutdown hang with SQPOLL thread

   - Fix for potential use-after-free of fixed file table"

* tag 'io_uring-5.6-2020-02-05' of git://git.kernel.dk/linux-block:
  io_uring: cleanup fixed file data table references
  io_uring: spin for sq thread to idle on shutdown
  aio: prevent potential eventfd recursion on poll
  io_uring: put the flag changing code in the same spot
  io_uring: iterate req cache backwards
  io_uring: punt even fadvise() WILLNEED to async context
  io_uring: fix sporadic double CQE entry for close
  io_uring: remove extra ->file check
  io_uring: don't map read/write iovec potentially twice
  io_uring: use the proper helpers for io_send/recv
  io_uring: prevent potential eventfd recursion on poll
  eventfd: track eventfd_signal() recursion depth
  io_uring: add BUILD_BUG_ON() to assert the layout of struct io_uring_sqe
  io_uring: add ->show_fdinfo() for the io_uring file descriptor

Pull more block updates from Jens Axboe:
 "Some later arrivals, but all fixes at this point:

   - bcache fix series (Coly)

   - Series of BFQ fixes (Paolo)

   - NVMe pull request from Keith with a few minor NVMe fixes

   - Various little tweaks"

* tag 'block-5.6-2020-02-05' of git://git.kernel.dk/linux-block: (23 commits)
  nvmet: update AEN list and array at one place
  nvmet: Fix controller use after free
  nvmet: Fix error print message at nvmet_install_queue function
  brd: check and limit max_part par
  nvme-pci: remove nvmeq->tags
  nvmet: fix dsm failure when payload does not match sgl descriptor
  nvmet: Pass lockdep expression to RCU lists
  block, bfq: clarify the goal of bfq_split_bfqq()
  block, bfq: get a ref to a group when adding it to a service tree
  block, bfq: remove ifdefs from around gets/puts of bfq groups
  block, bfq: extend incomplete name of field on_st
  block, bfq: get extra ref to prevent a queue from being freed during a group move
  block, bfq: do not insert oom queue into position tree
  block, bfq: do not plug I/O for bfq_queues with no proc refs
  bcache: check return value of prio_read()
  bcache: fix incorrect data type usage in btree_flush_write()
  bcache: add readahead cache policy options via sysfs interface
  bcache: explicity type cast in bset_bkey_last()
  bcache: fix memory corruption in bch_cache_accounting_clear()
  xen/blkfront: limit allocated memory size to actual use case
  ...

Pull libata updates from Jens Axboe:

 - Add a Sandisk CF card to supported pata_pcmcia list (Christian)

 - Move pata_arasan_cf away from legacy API (Peter)

 - Ensure ahci DMA/ints are shut down on shutdown (Prabhakar)

* tag 'libata-5.6-2020-02-05' of git://git.kernel.dk/linux-block:
  ata: pata_arasan_cf: Use dma_request_chan() instead dma_request_slave_channel()
  ata: ahci: Add shutdown to freeze hardware resources of ahci
  pata_pcmia: add SanDisk High (>8G) CF card to supported list

Depending on include order:

    include/linux/of_clk.h:11:45: warning: ‘struct device_node’ declared inside parameter list will not be visible outside of this definition or declaration
     unsigned int of_clk_get_parent_count(struct device_node *np);
						 ^~~~~~~~~~~
    include/linux/of_clk.h:12:43: warning: ‘struct device_node’ declared inside parameter list will not be visible outside of this definition or declaration
     const char *of_clk_get_parent_name(struct device_node *np, int index);
					       ^~~~~~~~~~~
    include/linux/of_clk.h:13:31: warning: ‘struct of_device_id’ declared inside parameter list will not be visible outside of this definition or declaration
     void of_clk_init(const struct of_device_id *matches);
				   ^~~~~~~~~~~~

Fix this by adding forward declarations for struct device_node and
struct of_device_id.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lkml.kernel.org/r/20200205194649.31309-1-geert+renesas@glider.beSigned-off-by: Stephen Boyd <sboyd@kernel.org>

Show the number of bootconfig nodes on boot message.

Link: http://lkml.kernel.org/r/158091062297.27924.9051634676068550285.stgit@devnote2Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Show the number of bootconfig nodes when applying new bootconfig to
initrd.

Since there are limitations of bootconfig not only in its filesize,
but also the number of nodes, the number should be shown when applying
so that user can get the feeling of scale of current bootconfig.

Link: http://lkml.kernel.org/r/158091061337.27924.10886706631693823982.stgit@devnote2Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Add more error messages for following cases.
 - Exceeding max number of nodes
 - Config tree data is empty (e.g. comment only)
 - Config data is empty or exceeding max size
 - bootconfig is already initialized

Link: http://lkml.kernel.org/r/158091060401.27924.9024818742827122764.stgit@devnote2Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Use "bootconfig" (1 word) instead of "boot config" (2 words)
in the boot message.

Link: http://lkml.kernel.org/r/158091059459.27924.14414336187441539879.stgit@devnote2Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

As function_graph tracer can run when RCU is not "watching", it can not be
protected by synchronize_rcu() it requires running a task on each CPU before
it can be freed. Calling schedule_on_each_cpu(ftrace_sync) needs to be used.

Link: https://lore.kernel.org/r/20200205131110.GT2935@paulmck-ThinkPad-P72

Cc: stable@vger.kernel.org
Fixes: b9b0c831 ("ftrace: Convert graph filter to use hash tables")
Reported-by: "Paul E. McKenney" <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

I am seeing ping failures to IPv6 linklocal addresses with Debian
buster. Easiest example to reproduce is:

$ ping -c1 -w1 ff02::1%eth1
connect: Invalid argument

$ ping -c1 -w1 ff02::1%eth1
PING ff02::01%eth1(ff02::1%eth1) 56 data bytes
64 bytes from fe80::e0:f9ff:fe0c:37%eth1: icmp_seq=1 ttl=64 time=0.059 ms

git bisect traced the failure to
commit b9ef5513 ("smack: Check address length before reading address family")

Arguably ping is being stupid since the buster version is not setting
the address family properly (ping on stretch for example does):

$ strace -e connect ping6 -c1 -w1 ff02::1%eth1
connect(5, {sa_family=AF_UNSPEC,
sa_data="\4\1\0\0\0\0\377\2\0\0\0\0\0\0\0\0\0\0\0\0\0\1\3\0\0\0"}, 28)
= -1 EINVAL (Invalid argument)

but the command works fine on kernels prior to this commit, so this is
breakage which goes against the Linux paradigm of "don't break userspace"

Cc: stable@vger.kernel.org
Reported-by: David Ahern <dsahern@gmail.com>
Suggested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>

 security/smack/smack_lsm.c | 41 +++++++++++++++++++----------------------
 1 file changed, 19 insertions(+), 22 deletions(-)

Because the function graph tracer can execute in sections where RCU is not
"watching", the rcu_dereference_sched() for the has needs to be open coded.
This is fine because the RCU "flavor" of the ftrace hash is protected by
its own RCU handling (it does its own little synchronization on every CPU
and does not rely on RCU sched).
Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Fix following instances of sparse error
kernel/trace/ftrace.c:5667:29: error: incompatible types in comparison
kernel/trace/ftrace.c:5813:21: error: incompatible types in comparison
kernel/trace/ftrace.c:5868:36: error: incompatible types in comparison
kernel/trace/ftrace.c:5870:25: error: incompatible types in comparison

Use rcu_dereference_protected to dereference the newly annotated pointer.

Link: http://lkml.kernel.org/r/20200205055701.30195-1-frextrite@gmail.comSigned-off-by: Amol Grover <frextrite@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Fix following instances of sparse error
kernel/trace/ftrace.c:5664:29: error: incompatible types in comparison
kernel/trace/ftrace.c:5785:21: error: incompatible types in comparison
kernel/trace/ftrace.c:5864:36: error: incompatible types in comparison
kernel/trace/ftrace.c:5866:25: error: incompatible types in comparison

Use rcu_dereference_protected to access the __rcu annotated pointer.

Link: http://lkml.kernel.org/r/20200201072703.17330-1-frextrite@gmail.comReviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Amol Grover <frextrite@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Merge tag 'pwm/for-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "Mostly cleanups and minor improvements with some new chip support for
  some drivers"

* tag 'pwm/for-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (37 commits)
  pwm: Remove set but not set variable 'pwm'
  pwm: sun4i: Initialize variables before use
  pwm: stm32: Remove automatic output enable
  pwm: sun4i: Narrow scope of local variable
  pwm: bcm2835: Allow building for ARCH_BRCMSTB
  pwm: imx27: Eliminate error message for defer probe
  pwm: sun4i: Fix inconsistent IS_ERR and PTR_ERR
  pwm: sun4i: Move pwm_calculate() out of spin_lock()
  pwm: omap-dmtimer: Allow compiling with COMPILE_TEST
  pwm: omap-dmtimer: put_device() after of_find_device_by_node()
  pwm: omap-dmtimer: Simplify error handling
  pwm: omap-dmtimer: Remove PWM chip in .remove before making it unfunctional
  pwm: Implement tracing for .get_state() and .apply_state()
  pwm: rcar: Document inability to set duty_cycle = 0
  pwm: rcar: Drop useless call to pwm_get_state()
  pwm: Fix minor Kconfig whitespace issues
  pwm: atmel: Implement .get_state()
  pwm: atmel: Use register accessors for channels
  pwm: atmel: Document known weaknesses of both hardware and software
  pwm: atmel: Replace loop in prescale calculation by ad-hoc calculation
  ...

Pull dmaengine fixes from Vinod Koul:
 "Fixes for:

   - Documentation build error fix

   - Fix dma_request_chan() error return

   - Remove unneeded conversion in idxd driver

   - Fix pointer check for dma_async_device_channel_register()

   - Fix slave-channel symlink cleanup"

* tag 'dmaengine-fix-5.6-rc1' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: Cleanups for the slave <-> channel symlink support
  dmaengine: fix null ptr check for __dma_async_device_channel_register()
  dmaengine: idxd: fix boolconv.cocci warnings
  dmaengine: Fix return value for dma_request_chan() in case of failure
  dmaengine: doc: Properly indent metadata title

Per PCIe r5.0, sec 9.3.7.14, if a PF implements the PASID Capability, the
PF PASID configuration is shared by its VFs, and VFs must not implement
their own PASID Capability.  But commit 751035b8 ("PCI/ATS: Cache PASID
Capability offset") changed pci_max_pasids() and pci_pasid_features() to
use the PASID Capability of the VF device instead of the associated PF
device.  This leads to IOMMU bind failures when pci_max_pasids() and
pci_pasid_features() are called for VFs.

In pci_max_pasids() and pci_pasid_features(), always use the PF PASID
Capability.

Fixes: 751035b8 ("PCI/ATS: Cache PASID Capability offset")
Link: https://lore.kernel.org/r/fe891f9755cb18349389609e7fed9940fc5b081a.1580325170.git.sathyanarayanan.kuppuswamy@linux.intel.comSigned-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org	# v5.5+