Attached is a driver for the PCA9564 "Parallel to I2C" chip, it is
similar in principle to the PCF8584 which is supported by the
i2c-algo-pcf and i2c-elektor code, however it's not code compatible in
any way: http://www.semiconductors.philips.com/pip/PCA9564PW.html

The patch contains the PCA algorithm driver and a bus driver for an ISA
card. It only supports master send and receive but I'm not sure that the
Linux i2c stack supports client side operation anyhow, and I have no
hardware to test on.

It was tested on a PC104 card containing the PCA chip and an Atmel TPM
device and also on a separate PC104 card with a DS1307 RTC hotwired onto
it for testing purposes.

The driver is against a 2.6 BK tree pulled on Friday. I also have a
fairly trivial 2.4 backport if that is of interest.

From: Ian Campbell <icampbell@arcom.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This is second part, which just adds the functionality to existing code
base, also including support of vid inputs for it8712 chip.

This patch was also briefly reviewed by Jean Delvare.
Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This patch forms composite module with i2c-sensor.c and new file
i2c-sensor-vid.c, which provides i2c_which_vrm function for detecting VRM
version of processor using cpuid_eax func. Resulting module has unchanged
name (i2c-sensor).

Before applaying this patch, please rename i2c-sensor.c to
i2c-sensor-detect.c

This patch was briefly reviewed by Jean Delvare.
Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

The attached patch for Linux 2.6 adds an I2C driver for the MPC107 host
bridge, plus the integrated controllers in the MPC824x, MPC85xx, and
MPC52xx PowerPCs.  The driver has been tested on a variety of systems,
by people on the linuxppc-embedded list.
Signed-off-by: Adrian Cox <adrian@humboldt.co.uk>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

into kroah.com:/home/greg/linux/BK/i2c-2.6

From: Dominik Brodowski <linux@dominikbrodowski.de>

HP hides the SMBus on the HP D330L. Original patch by Stoyan Martinov.
Signed-off-by: Örjan Persson <orange@fobie.net>
Signed-off-by: Dominik Brodowski <linux@brodo.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Uses msleep() instead of schedule_timeout() to guarantee
the task delays the requested time.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Uses msleep() instead of schedule_timeout() to guarantee
the task delays at least the desired time amount.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

this patch adds SiS 1039:0018 to PCI device list of sis630.c. This is needed,
due to changes in pci quirks that cause sis630/sis730 LPC to change id from
008 -> 0018. This patch doesn't have any side effects, because i2c-sis630
checks for supported devices.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

The trivial patch below fixes two debug prints in the w83781d driver
(one needless dereference and one debug print without device info).

Signed-off-by: Jean Delvare <khali at linux-fr dot org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Following patch adds support for using GPIO pins on Intel's IXP2000
Network Processor as a bit-bang I2C adapter. IXP2000 support will
be coming in via ARM updates once all the various drivers have been
merged upstream.
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Remove iic_ite_sleep() and replace invocations with msleep().
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Remove pcf_sleep() and replace invocations with msleep().
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Uses msleep() instead of schedule_timeout() to guarantee
the task delays at least the desired time amount.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Previously, fatfs was using NLS_DEFAULT if users didn't specify the
codepage or iocharset option.  This became cause of trouble (filename
access).

This patch removes the complicated default config in kernel.

Instead of it, by default, fatfs uses builtin nls ("default"), also reports
it and mounts as read-only.  This default will limit the access more or
less.  Note: If peoples want to write on this default, it still can switch
by remount.

Therefore, basically users will need to specify mount options always.
("codepage" for msdos, and "codepage" and "iocharset" for vfat) However, it
can be done simply by script or shell alias or something else in userland.

Thanks to Andries Brouwer for your many advice.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

There is a lonstanding off-by-one error that results from an incorrect
comparison when checking whether a process has consumed CPU time in
excess of its RLIMIT_CPU limits. 

This means, for example, that if we use setrlimit() to set the soft CPU 
limit (rlim_cur) to 5 seconds and the hard limit (rlim_max) to 10 seconds, 
then the process only receives a SIGXCPU signal after consuming 6 seconds
of CPU time, and, if it continues consuming CPU after handling that
signal, only receives SIGKILL after consuming 11 seconds of CPU time.

The fix is trivial.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Author: Armin Schindler, Nishanth Aravamudan

Use kernel provided msleep() instead of own sleep
implementation.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

There's a stupid error in the fall back logic, it fails to increment the
user pointer so the wave file is corrupt. We should also clear
last_sense just to be sure.
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Here are some oops I found in error paths in the mounting pathes while
debugging something else...  I sent it out a while ago, but it didn't seem
to get any traction....

The nfs_fill_super() fix is obvious and in nfs4_fill_super(), the
server->client ptr needs to be set before the cl_idmap check, since
rpc_shutdown_client() needs it when the check fails.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Remove the unused symbol_is() macro.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Below is a patch by Hans Ulrich Niedermann
<linux-kernel@n-dimensional.de> to change all references in comments to 
files in Documentation/ to start with Documentation/
Signed-off-by: Adrian Bunk <bunk@fs.tum.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This file does not exist in 2.6.
Signed-off-by: Adrian Bunk <bunk@fs.tum.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch
	- adds copyright and license info
	- changes sense of mmap config option (setting option enables mmap
	  instead of disabling it, to avoid the double negative)
	- removes an #ifdef CONFIG_IA64 now that acpi_register_gsi()
	  is generic.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Sync nmi_watchdog.txt with reality on x86-64.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Actually, the problem has its origin in my removal of all in-kernel
syscalls (except execve, which is non-trivial) earlier this year.  This
change was blindly reverted by the maintainer, while at the same time the
local errno variable was removed.  See also
http://linux.bkbits.net:8080/linux-2.5/hist/drivers/media/dvb/frontends/tda=
1004x.c

This patch is the one that was already merged earlier.  I'm now also
removing the definitions for the kernel syscalls on i386 to make it harder
to reintroduce them again.  This was already done for ppc64, the others
should probably follow.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Tom is looking after PPC8xx and the PPC boot code.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

ACKed by the pmac folks a while ago.  Also moves the Kconfig entry to where
it belongs.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Revert the recent fdomain_cs config dependency "fix" and fix the linkage
error with ifdeffery instead.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Maciej has moved.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The "vector" terminology is architecture-dependent.  The PCI MSI interface
actually deals with Linux IRQ numbers (i.e., things you can pass to
request_irq()), and we shouldn't confuse things by calling them "vectors" just
because we're using MSI rather than an IOSAPIC.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Second half of MSI rewrite: fix the API and update documentation.  Split
enabling MSI and MSI-X to separate pci_enable_msi()/pci_disable_msi() and
pci_enable_msix()/pci_disable_msix() functions.  free_irq() no longer has
the side effect of freeing interrupt vectors (so a device driver can do
multiple request_irq()/free_irq() cycles on the same MSI/MSI_X vector).

From: Tom L. Nguyen <tom.l.nguyen@intel.com>
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

First half of the MSI rewrite: pure cleanup.  Use proper
pci_read_config_xxx() and pci_write_config_xxx() functions instead of
accessing raw dev->bus->ops.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

On a system with a lot of nodes, 4 lines of output per node is a lot to
have to sit through as the system comes up, especially if you're on the
other end of a slow serial link.  The information is valuable though, so
keep it around for the system logger.  This patch makes the printks for the
memory stats use KERN_DEBUG instead of the default loglevel.
Signed-off-by: Jesse Barnes <jbarnes@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fix menuconfig inability to show help texts when there is menu item with
letter "H" highlighted on the screen.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Change the oom-killer so that it spits a sysrq-m output into the logs, and
shows the gfp_mask of the failing allocation attempt.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>