- 14 Dec, 2011 12 commits
-
-
Samuel Ortiz authored
The netlink notifier is atomic so we must not sleep in that context. Also we know that Any netlink packets arriving to us will be purged when the notifier is called, so we don't need to take the mutex. Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Samuel Ortiz authored
This is a factorization of the current rawsock tx skb allocation routine, as it will be used by the LLCP code. We also rename nfc_alloc_skb to nfc_alloc_recv_skb for consistency sake. Signed-off-by:
-
Samuel Ortiz authored
Signed-off-by:
-
Helmut Schaa authored
ieee80211_free_txskb should be used when dropping a frame in the device rx path such that mac80211 knows about this frame being dropped. Signed-off-by:
Helmut Schaa <helmut.schaa@googlemail.com> Acked-by:
Gertjan van Wingerde <gwingerde@gmail.com> Acked-by:
Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by:
-
Simon Wunderlich authored
Our new return also created a memleak. The skb should be freed before returning an error. Signed-off-by:
Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by:
-
Amitkumar Karwar authored
cfg_workqueue was added to notify cfg80211 that scan, connect or disconnect is done by calling respective completion handlers. We can avoid use of this workqueue by calling those handlers from other places. 1) Call connect, disconnect completion handlers in their callback functions. ex. Call cfg80211_connect_result() in mwifiex_cfg80211_connect() 2) Call scan completion handler after parsing response of last scan command in a queue. After removing the workqueue, variables (assoc_request etc.) and checks used for mutual exclusion become redundant. Those are also removed in this patch. Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by:
Nishant Sarmukadam <nishants@marvell.com> Signed-off-by:
Kiran Divekar <dkiran@marvell.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
-
Johannes Berg authored
All nl80211 commands that need only the wiphy still allow identifying it by giving an interface index, except, as Kenny pointed out, the testmode dump support. Fix this by looking up the wiphy via the ifidx in this case as well. Tested-by:
Kenny Hsu <kenny.hsu@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirelessJohn W. Linville authored
Conflicts: drivers/net/wireless/iwlwifi/iwl-agn.c
-
Wey-Yi Guy authored
My previous patch 34a5b4b6 iwlwifi: do not re-configure HT40 after associated Fix the case of HT40 after association on specified AP, but it break the association for some APs and cause not able to establish connection. We need to address HT40 before and after addociation. CC: stable@vger.kernel.org #3.0+ Reported-by:
Andrej Gelenberg <andrej.gelenberg@udo.edu> Signed-off-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com> Tested-by:
-
Johannes Berg authored
Ted reported that he couldn't connect to some APs and bisected it to the tx_sync implementation. Disable it for the BSS context to fix this issue. Reported-by:
Ted Ts'o <tytso@mit.edu> Signed-off-by:
-
Yogesh Ashok Powar authored
Command cancel path cancels the current command and moves it to free command queue. While doing that it deletes the command entry from the pending list. This is not correct as the entry has been already deleted from the pending list at 'mwifiex_exec_next_cmd'. Fixing it. Also making sure the stale command pointer is cleaned and unaccessible for later use. Signed-off-by:
-
John W. Linville authored
Avoids this: ERROR: "bcma_chipco_pll_write" [drivers/net/wireless/b43/b43.ko] undefined! Signed-off-by:
-
- 13 Dec, 2011 28 commits
-
-
Amitkumar Karwar authored
mwifiex driver no longer supports it's own custom regulatory rules, but custom regulatory domain capability is still advertised during wiphy registration by the driver. Signed-off-by:
-
Arend van Spriel authored
The brcmsmac driver has been verified on chipsets that were supported when it was a pci device driver, ie. bcm4313, bcm43224, and bcm43225. This patch restricts the driver to 802.11 core revisions that are found in these chipsets. Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by:
Alwin Beukers <alwin@broadcom.com> Signed-off-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
Franky Lin <frankyl@broadcom.com> Signed-off-by:
-
Arend van Spriel authored
Instead of storing the buscore information now the BCMA core device is kept for quick reference in si_info structure. Reviewed-by:
-
Arend van Spriel authored
Number of fields are no longer needed as the BCMA provides it or makes them redundant. These have been removed. Reviewed-by:
-
Arend van Spriel authored
In aiutils.c the selected core was maintained by its index number. This is obsolete using BCMA functions so several functions using that index have been removed. Reviewed-by:
-
Arend van Spriel authored
The function ai_switch_core() is no longer needed and its counterpart ai_restore_core() as well, because interrupts disabling is not needed anymore. Reviewed-by:
-
Arend van Spriel authored
There is no need to interrupt disable/enable functionality any longer due to BCMA usage assures the correct core is accessed in any context. Reviewed-by:
-
Arend van Spriel authored
The macros were used to assure that the correct core was accessed in the ISR, but register access is now done giving the explicit core so no need to change interrupt state. Reviewed-by:
-
Arend van Spriel authored
A number of functions in pmu.c are not used or adding no functionality at all. These have been removed. Reviewed-by:
-
Arend van Spriel authored
The register access macros like R_REG/W_REG/etc. are no longer needed as the driver uses the BCMA provided functions. Reviewed-by:
-
Arend van Spriel authored
The code in aiutils.c now uses the BCMA function for control the registers in the device cores. Reviewed-by:
-
Arend van Spriel authored
The code in pmu.c now uses the functions provided by BCMA to access the core registers. Reviewed-by:
-
Arend van Spriel authored
The code in srom.c now uses the core access function provided by BCMA so no need to pass __iomem pointer any longer. Reviewed-by:
-
Arend van Spriel authored
The code in otp.c now uses the bcma core access functions to read the OTP information from the device. Reviewed-by:
-
Arend van Spriel authored
Instead of returning the core index the function now returns the bcma device for the requested core id. This function is now exposed in the header file. Reviewed-by:
-
Rafał Miłecki authored
Specs were updated. Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
The order is different than on older PHYs. Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Eliad Peller authored
The ip address of the vif can be set even before the vif is up. requiring the vif to be up in the vif notifier makes the notifer ignore this event, which causes wrong arp filter configuration later on. Reported-by:
Eyal Shapira <eyal@wizery.com> Signed-off-by:
Eliad Peller <eliad@wizery.com> Signed-off-by:
-
Eliad Peller authored
Configure arp filtering on sta reconfiguration. Signed-off-by:
-
Dmitry TARNYAGIN authored
ieee80211_configure_filter code used local->scanning as a boolean value when it was a bit mask. Bits SCAN_COMPLETED, SCAN_ABORTED should not set FIF_BCN_PRBRESP_PROMISC filter. SCAN_HW_SCANNING should not set FIF_BCN_PRBRESP_PROMISC either, as there is no explicit filter configuration request from scan code. If a driver requires FIF_BCN_PRBRESP_PROMISC mode during HW scanning, it's up to the driver to temporary enable it. Similar mistake was fixed also in ieee80211_hw_config (power configuration code). Verified-by:
Vitaly Wool <vitaly.wool@sonyericsson.com> Signed-off-by:
Dmitry Tarnyagin <dmitry.tarnyagin@stericsson.com> Signed-off-by:
-
Stanislaw Gruszka authored
With previous patch "rtlwifi: use work for lps" we can now use mutex for protecting ps mode changing critical sections. This fixes running system with interrupts disabled for long time. Merge ips_lock and lps_lock as they seems to protect the same data structures (accessed in rtl_ps_set_rf_state() function). Reported-by:
Philipp Dreimann <philipp@dreimann.net> Tested-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Mike McCormack <mikem@ring3k.org> Cc: Chaoming Li <chaoming_li@realsil.com.cn> Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
Tim Gardner <tim.gardner@canonical.com> Signed-off-by:
-
Stanislaw Gruszka authored
Leaving leisure power save mode can take some time, so it's better to perform that action in process context with interrupts enabled. This patch changes lps_leave tasklet to work. Reported-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
