- 04 Mar, 2010 40 commits
-
-
Graham M Howe authored
This is a patch to the ni_daq_700.c file that fixes up brace and 80 character warnings found by the checkpatch.pl tool Signed-off-by:
Graham M Howe <gman.1352@googlemail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Arthur Benilov authored
VMIVME-7805 board has a special control register that has to be used in order to activate the VME bus access via the Universe II bridge. This control register also handles endianess convertion. Signed-off-by:
Arthur Benilov <arthur.benilov@iba-group.com> Signed-off-by:
Vincent Bossier <vincent.bossier@iba-group.com> Acked-by:
Martyn Welch <martyn.welch@ge.com> Signed-off-by:
-
Arthur Benilov authored
For VME device I/O operations on master windows the user driver tends to use kern_buf buffer array which is not allocated. This causes an error when reading from master window device files. Signed-off-by:
-
Arthur Benilov authored
When requesting slave resources A16 addressing mode flag is used to find available windows. Since the ca91cx42 bridge only supports two A16 slave windows but four are requested, the driver fails to initialize. The flag has been changed to A24, which is supported by all slave windows. Signed-off-by:
-
Arthur Benilov authored
Provide vme_user_llseek() implementation. Signed-off-by:
-
Martyn Welch authored
Remove the code from the drivers that we are not going to implement before submitting for review. Signed-off-by:
-
Martyn Welch authored
Sort out slot detection on the ca91cx42. Signed-off-by:
-
Martyn Welch authored
Add support for Master Read-Modify-Write cycles on the ca91cx42. Signed-off-by:
-
Martyn Welch authored
The ca91cx42 driver currently incorrectly handles master windows, setting and retrieving the sizing parameters incorrectly. Also, in the slave window handling, it uses an incorrectly set variable. Signed-off-by:
-
Martyn Welch authored
Add support for the DMA controller in the ca91cx42 bridge. Signed-off-by:
-
Martyn Welch authored
Signed-off-by:
-
Martyn Welch authored
The vme_master_resource structure contains an item called "pci_resource". Rename to make bus agnostic. Signed-off-by:
-
Martyn Welch authored
At the moment the vme bridge drivers are written in a way that only allows them to support one bridge at a time. Modify the drivers to enable more than one bridge to be present per board. Signed-off-by:
-
Martyn Welch authored
Check the directions in which the DMA controller is expected to operate before giving control of a resource. Signed-off-by:
Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by:
-
Martyn Welch authored
This patch corrects author email addresses and Copyright notices as a result of the split up of the GE Fanuc joint venture. Signed-off-by:
-
Randy Dunlap authored
rtl8187se needs to include semaphore.h to prevent build errors: drivers/staging/rtl8187se/ieee80211/ieee80211.h:1004: error: field 'wx_sem' has incomplete type drivers/staging/rtl8187se/ieee80211/ieee80211.h:1005: error: field 'scan_sem' has incomplete type Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Bernie Thompson authored
Remove last remaining printk and clarify comments Signed-off-by:
Bernie Thompson <bernie@plugable.com> Signed-off-by:
-
Bernie Thompson authored
Specify Kconfig dependencies, and include warnings for building as a module udlfb is dependent on FB_DEFERRED_IO, FB_SYS_*, and FB_MODE_HELPERS Because many kernels do not include defio (which cannot be built as a module), yet users want to be able to build udlfb as a module later, udlfb has ifdefs and these dependency warnings to help udlfb build with or without certain dependencies, but also print warnings for any lost function. Even though this kind of flexibility isn't common, we've gotten feedback from a significant portion of users that they were frustrated without it. Signed-off-by:
-
Bernie Thompson authored
Add support for fbdev mmap clients who don't send damage ioctls Because DisplayLink devices are out on the other end of usb, their "framebuffer" is just normal system memory. So memory mapped writes don't automatically trigger anything. So up to this point, standard fbdev clients who rely on mmap() will get an unchanging screen. This patch makes udlfb a client of Jaya Kumar's defio framework - which sets up page fault triggers, and those faults are accumulated and sent to udlfb on a defferred basis, to process as damage notifications for the framebuffer. Because this involves more overhead than a notification directly from the application (e.g. just passing on X DAMAGE extension notifications), a sysfs attribute is provided by udlfb to control defio support. /sys/class/graphics/fb*/use_defio - writing a "0" to this file before calling mmap() causes defio to not be initialized - instead udlfb will rely on getting damage notifications directly through the damage ioctl. There are unsolved rendering problems with defio (horizontal dead regions on framebuffer, that accumulate over time) which still needs a fix. Signed-off-by:
-
Bernie Thompson authored
Rework rendering for improved performance Approx 10-20% gain avg across several "benchmarks": x11perf, gtkperf, glxgears Moves from a single pre-alloc'd urb protected by a long-held mutex To a list of (4) pre-alloc'd urbs which can be dispatched asynchonously Improved rendering algorithm to hardware with lower CPU consumption, fewer system memory accesses, and slightly higher compression. Better scalability to multiple processors, especially with multiple framebuffers active. Signed-off-by:
-
Bernie Thompson authored
Rework probe to use refcounts and std functions Because the different parts of the driver (usb, fbdev) tear down in different orders, the driver previously could crash accessing data that had already been freed. Refcounting system used to handle. Reworked probe to make use of refcounts, set mode using std fbops, and set up sysfs and pre-allocated urbs. Signed-off-by:
-
Bernie Thompson authored
Add sysfs controls for edid and performance metrics There are 8 new files exposed in /sys/class/graphics/fb* edid - returns 128 byte edid blog, suitable for parsing with parse-edid metrics_bytes_identical metrics_bytes_rendered metrics_bytes_sent metrics_cpu_kcycles_used metrics_misc and metrics_reset, which resets all perf metrics to zero The 6 perf metrics are of type atomic_t. So these metrics return precise results for short benchmarks, but any test approx a minute or longer runtime may roll over. Signed-off-by:
-
Bernie Thompson authored
Move to more consistent naming scheme All udlfb functions start with udlfb_ All functions for udlfb's fbdev interface start with udlfb_ops_ All functinos for udlfb's usb interface start with udlfb_usb_ Signed-off-by:
-
Bernie Thompson authored
Add functions to pre-allocate and free usb bulk urbs for core render path. Udlfb currently allocates a single urb, guarded by a mutex, that is a key bottleneck. Because udlfb sends so much data, preallocation is most efficient. Functions will be used by new rendering functions in later patches. Signed-off-by:
-
Bernie Thompson authored
Reorganize the location of a few things to be closer to related code Signed-off-by:
-
Bernie Thompson authored
Eliminate checkpatch.pl warnings and errors so later patches in series are clean Signed-off-by:
-
Larry Finger authored
Remove dead code from r8185b_init.c. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Larry Finger authored
For the RTL8187SE, the variable priv->rf_chip is always RF_ZEBRA4 and priv->RegThreeWireMode is always HW_THREE_WIRE_SI. Remove these 2 variables. Signed-off-by:
-
Larry Finger authored
Remove a routine that is not used. Signed-off-by:
-
Svenne Krap authored
Cleanups as suggested by checkpatch.pl utiltiy. .o's from before and after cleanup have matching SHA1s. Signed-off-by:
Svenne Krap <svenne@krap.dk> Signed-off-by:
-
Svenne Krap authored
Trivial changes to code-paths. Signed-off-by:
-
Graham M Howe authored
This is a patch to ni_atmio.c file to fix up bracing style problems found by checkpatch.pl tool Signed-off-by:
-
Dan Carpenter authored
It's clear from the indent levels and the context that there are supposed to be curly braces here. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Larry Finger authored
The current driver does not follow the state of the RF switch. Signed-off-by:
-
Larry Finger authored
The TODO list includes switching this driver to use the common EEPROM routines in EEPROM_93CX. Signed-off-by:
-
Jochen Maes authored
Removed parenthesis from return statements, split up assignment and if condition Signed-off-by:
Jochen Maes <jochen.maes@sejo.be> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Jochen Maes authored
Fixed code style issues. Signed-off-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Jochen Maes authored
Fixed Codestyle issues Signed-off-by:
-
Benjamin Adolphi authored
This fixes all checkpatch issues in the rti800 comedi driver. Signed-off-by:
Benjamin Adolphi <b.adolphi@gmail.com> Signed-off-by:
-
Mark Allyn authored
Add suspend and resume functions (which are currently stubs returning -ENOSYS) Signed-off-by:
Mark Allyn <mark.a.allyn@intel.com> Signed-off-by:
-
